Model Magne Manual
Contents
1. Magne Model Manual Magne gt Nordic Mythology Magne means strength In Nordic mythology Magne is the super baby son of Thor the God of Thunder and when he is three days old he is so strong that he can lift a dead giant away from his father who is pinned underneath Magne is one of the few gods who survive Ragnerok the nordic armageddon and rebuilds the new world Read this before handling the turntable An analogue playback system is a sensitive piece of precision mechanics and must be handled as so e Read the instruction carefully before set up and operating the turntable e Allways keep the right side up when handling the turntable e Follow the instruction manual step by step to get the best result e The tiny tonearm wire must be handlet with care e Do not turn off the valves on the turntable backpanel when the airsupply is operating e Keep the turntable away from direct sunlight e Check the dust filter at the air supply frequently Index Page 4 Product Overview Page 5 8 Setup Manual Page 9 Setup Tips Page 10 Maintenance Specifications Page 11 CE Confirmation Page 3 Turntable speed finetuning speed finetuning 45 RPM 33 RPM armtube armlift gt air pipe ground input right channel input left channel airflow adjustment valve arm input PSU air input airflow adjustment valve platter Airsupply on off dust filter air2. ble backpanel EA Pic 19 Playing records Turn on the airsupply When moving the tonearm push carefully the sliding pipe Do not push the headshell Turn down the armlift slowly until the stop It is recommended to turn off the platter when changing records Enjoy Set up tips To ensure an airbearing turntable tonearm to work perfect there are some important parameters that is vital to succeed On the Bergmann turntables and tonearms the parameters are as follows The platter 1 The platter must be in level as every other turntables 2 the amount of airflow must be correct That means just enougth air to lift the platter to obtain a frictionless airfilm between the airbearing and the subplatter 3 The airbearing and subplatter must be absolutely clean to avoid friction and noise The tonearm 1 The airpipe must be in level Bergmann tonearms can be tilted independed of the plinth 2 The airpipe and the sliding pipe must be absolutely clean 3 The tracking force must be correct 4 The airflow must be correct The airflow is correct when the sliding pipe is floating unhindered on the airpipe An airfilm must create a space between the airpipe and the sliding pipe That means just enougth airflow to lift the sliding pipe from the airpipe but not so much as a friction is caused at the underside between the sliding pipe and the airpipe Page 9 Maintenance Turntable It is recommende to check the adj
3. output PSU Page 4 Setup Manual Place the turntable on a stable adjustable rack or shelf Add oil to the bearing appr half full See Pic 1 Mount the subplatter in the bearing The flat side upside Pic 2 and let it sink Remove the subplatter again If oil is pressed out of the bearing the amount is correct Pic 3 Wipe away the surplus of oil Note Be aware the oil does not flow into the airbearings air hole Mount the subplatter again Note The airbearing and subplatter must be absolutely clean to avoid friction and noise Pic 1 Pic 2 Pic 3 surplus of oil Mount the belt around the subplatter and motor pulley Pic 4 and 5 Mount the platter Pic 6 and adjust the rack or shelf in level Pic 4 Pic 5 Pic 6 Install the airsupply in a horizontal position Connect the airtube one end to the airsupply and one end to the turntable air input Pic 7 Plug in the powercord to the airsupply and the outlet Note It is very important to place the airsupply in an indoor environment to prevent condense to enter the system Pic 7 Turn on the airsupply and start the platter If any noise is caused by the bearing an airflow adjustment is required Adjust the airflow at the backpanel Important Do not turn off the adjustments valves on the turntable when the airsupply is operating Page 5 6 Finetune the speed by the small push buttons Pic 8 finetune fine
4. ss line Pic 17 12 The headshell on Magne tonearm is complete parallel to the sliding pipe such as the cartridge azimuth is perfect when mounted on the headshell Note If adjustment is required it must be done by using spacers between cartridge and head shell 13 Turn on the airsupply The 2 screws on the tonearm base is also for leveling the tonearm Depending on how much the left or the right screw is tighten the tonearm airpipe can be tilted to the left or to the right Ex Tilt to the left by slightly untighten the right screw tighten the left screw and visa versa The adjustment pipe is a helpfull tool to ease the level of the airpipe which is vital for a linear tracking airbearing tonearm Draw the adjustment pipe onto the airpipe Pic 18 Make sure the adjustment pipe is sliding frictionless on the airpipe Adjust the airflow if necessary When the adjustment pipe float and remain on the same point the level is correct adjustment pipe Page 7 14 Page 8 Note The tonearm must slide absolutely frictionless on the airpipe To obtain this effect slightly move the tonearm on the airtube Pic 19 at the same time gently adjust the airflow if necessary Note The armlift must be at the down position when finetuning the airflow Warning Be aware of the stylus when you do the adjustment When you feel the tonearm is sliding unhindered on an airfilm the airflow is correct Adjust the airflow at the turnta
5. tune Pic 8 7 Mount the cartridge in the headshell and just tighten slightly such it is possible to turn the cartridge Connect the cartridge clips to the cartridge pins Note the colour Pic 9 Note The cartridge clips must be handled with the greatest care Pic 9 8 Mount the counter weight Turn on the airsupply Adjust the tracking force See the cartridge manual for recommended tracking force Note The tonearm must slide frictionless on the airpipe when adjusting the tracking force 9 Turn of the airsupply To ensure the platter do not turn Place the alignment tool on top of the platter and make sure the groove is completely parallel to the tonearm airpipe It is recommended to use a calliper for exact measuring Pic 10 Measure both end Pic 11 and 12 groove 10 Adjust the VTA Loosen the screw on the tonearm backside Adjust the VTA such as the armtube is parallel to the alignment tool Pic 13 Tighten the screw Pic 13 Page 6 parallel 11 Turn the cartridge such as the stylus is parallel to the alignment tools crossline Pic 14 Tighten the cartridge If the cartridge has a flat front you can use any non magnetic device Pic 15 Untighten the 2 screws on the armbase and move the tonearm forward or backward to adjust the overhang Pic 16 Move the tonearm so the styles tip is exactly in the groove of the alignment tool Pic 17 T z Pic 14 Pic 15 Pic 16 cro
6. ustments yearly If necessary finetune Check the amount of oil in the bearing yearly Clean carefully with a soft cloth wriged in mild soapy water Airsupply Check the dust filter frequently and clean or replace if necessary A dirty filter can cause damage to the pump Clean carefully with a soft cloth wriged out in mild soapy water Specifications Turntable Plinth Platter Bearing Subplatter Dimensions Total weight Tonearm Effectiv mass Motorcontrol Airsupply Dimensions Weight Page 10 Airbearing design Record flatten by a heavy clamp DC motor Beltdriven High density composite material Aluminium platter Polycarbonate mat supported by air and centred by steel spindel hardweared low friction polymer bearing Platter weight 6 0kg Aluminium weight 1 4kg 440 x 495 x 165 DxWxH 18 5kg Linear tracking airbearing tonearm Aluminium carbon Armtube damped inside Counter weight decoupled from armtube Wire High quality copper litz Clips Gold plated copper Connectors CMC rca connectors Gold plated super copper Neutrik XLR connectors Gold plated Cardas DIN connectors Gold plated 11 gr Seperate plug in power supply 33 amp 45 rpm Speed finetuning Silent clean dry and smooth airflow Replaceable dust filter 300 x 190 x 175 Dx Wx H 5 4kg D e rg m a n n Registered Trademark Handcrafted in Denmark www bergmannaudio com
Download Pdf Manuals
Related Search