Car Alarm Python 460 Responder (3305P) Two Way
Contents
1. To exit Panic Mode gt Press e Or on the remote o activate Silent Mode Press briefly before arming or disarming and the confirmation chirp s will be eliminated for that one operation only Location of Valet Button Number of Valet Button pulses for disarming O 2008 directed electronics 45 Online store car audio and autogoods Winauto The company behind this system is Directed Electronics Since its inception Directed has had one purpose to provide consumers with the finest vehicle security and car stereo products and accessories available The recipient of more than 100 patents in the field of advanced electronic technology Directed is ISO 9001 registered Quality Directed Electronics products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our No services V xO Directed is mitted to delivering world class quality products and services that excite and delight our customers driven to excel Lec ten ELECTRONICS Directed Electronics Vista CA 92081 www directed com 2006 Directed Electronics All rights reserved G3305P 2008 122. ignition or celi This is the factory setting Silent mode 22 To temporarily turn off the arm or disarm chirps use Silent Mode Press for less than one second before arming or disarming and the confirmation chirp s will be eliminated for that one operation only If you want the arm disarm chirps turned off permanently your dealer can do this for you note The Warn Away response to lighter impacts is bypassed if the system is armed using Silent Mode This ensures that no chirps will be emitted by the siren in an area you want chirp free The system is still fully capable of triggering Only the Warn Away response is bypassed 2008 directed electronics Online store car audio and autogoods Winauto The LCD remote responds with the normal arm disarm notifi cations in silent mode If the remote has beeps programmed On the remote will beep Panic mode note On both remotes the panic button is the same color LCD remote gt S If you are threatened in or near you icle you can attract attention by triggering the sys your LCD remote Just press Or button for oximately two seconds and you will enter Panic Mod Ake siren will sound and the parking lights will flash for she programmed siren duration To stop Panic Mode at any tink press Or EY button on the LCD remote again The LCD remote responds with one beep and display of the icon upon entering Panic Mode 4 button remote If you a
3. needs It is almos aving four separate alarms in your vehicle one for each user note Owner Recognition cannot be programmed with out a Directed Bitwriter and the necessary software Check with your dealer for more information 2008 directed electronics 31 Online store car audio and autogoods Winauto Dapjd ogi 32 This Directed system will store its current state to non volatile memory If power is lost and then reconnected the system will recall the stored state from memory This means if the unit is in Valet Mode and the battery is disconnected for any reason such as servicing the car when the battery is reconnected the unit will still be in Valet Mode This applies to all states of the system including arm disarm VRS and Valet 0 S Your system will 7 Power Saver Mode while armed or in Valet operation has been the vehicle s b following conditions eflafter a period of time in which no rmed This lowers the current draw to Power Saver Mode takes over under the gt Power Saver when the system is armed After the system has been armed for 24 hours the in vehicle LED will flash at half its normal rate decreasing the system s current draw gt Power Saver in Valet Mode When the system enters Valet Mode the in vehicle LED illuminates steadily If the vehicle is not used ignition is not turned on for a period of one hour while the system is in Valet Mode the LED will s
4. the RO chirping and the park could be used to notify au ing lights begin flashing This thorities that your vehicl een hijacked and tell them what the VRS will do ENS Fifteen seconds he siren chirps begin the siren s output will change to a continuous blast From this point on when the ignition key is turned off the VRS will immediately turn on the starter kill This will prevent the vehicle from being restarted thus immobilizing it at that spot Three minutes after the constant siren output begins the flashing parking lights and the siren will stop The starter kill will remain active until the system is disarmed If the door is opened or the ignition is turned off and on in an attempt to restart the car the siren and light flashing will begin again 2008 directed electronics 39 Online store car audio and autogoods Winauto Disarming the VRS 40 Take the time to familiarize yourself with the VRS triggering se quence and the disarm procedure It is important to recognize and identify the VRS trigger sequence and know how to disarm it in case of accidental activation Once the VRS is armed it does not disarm automatically You must disarm it the next time you operate the vehicle You must disarm it with one of the following procedures If the system has not entered the A om siren has e not started chirping 1 Turn the sy 2 Press di e transmitter for one second The A
5. ER RRPPRA A ER Y 18 DSS 19 Disarming without a transmitter s Sag radbrRE UR RSE Ee ES EPEERP T PEE 21 Dome light control optional idus esa cuia pie PAX RAPI RE PRESE 22 Silene modes menene M E E a E E EE E 22 Panie mode vcs 2cdaccecaucedeseseei norin p Tre ERA EEES tase adiays 23 Valet Mode EMIT m 24 Nuisance prevention circuitry vicainas bes nd RRXU A ERR T Rd Sd EU 25 Auxiliary outputs options ssssssssssesesesrereeresrererersereres 26 brin i PPP 27 Arming diaenosteS ssena nPRX RV ERIECAREEEWRPT4a SER RAE Ea Rd ERE 27 Disarming diagnostics es vriet drag Dui EEEa aE cir a iri T E 28 Table of ZONES RTL uE E NEE ERE E SENER ERE REEE REEE EKS 29 Interpreting zone diagnostics s eae ws conte ne PR nay Fader ar aeHe ewes 30 2008 directed electronics iii Online store car audio and autogoods Winauto Owner recognition cs vi ea ox OA OC RR dE WAR LOK ENS ERR ao WR LR OR d 31 Rapid teste logic 2e acte sd ER ET PE pex e E Ca WE yed Team en quee SP quA 32 Power sav t mode Em 32 Programming esi cax aa Rake eR A dX WenbE a usaian a e RA RF a EE 33 Installation options usooexe rtr eed eo esa ER da ks RF Fakt qat iud as 37 Vehicle recovery system VRS os dedi ce a aed dele ara au ac x x a e 97 Arming the VRS uoasdieredpiuebibeeibe Eq vedette dus usada inte 38 Triggered Sequens VERus agua oscues cesbvsbsadeu poss E VP Pda RES PAS 39 Disarming the VRS rrene rane Ree naani
6. Shock Sensor This is a sensor mounted in the vehicle that is designed to pick up impacts to the vehicle or glass Siren Noise generating device usually installed in the engine compartment of the vehicle It is responsible for generating the O 2008 directed electronics 43 44 Online store car audio and autogoods Winauto chirps you hear as well as the six tones you hear while the alarm is triggered Transmitter Hand held remote control which operates the various functions of your system Trigger or Triggered Sequence This is what happens when the alarm goes off or trips The triggered response of your system consists of the siren sounding and parking light flashing for the programmed duration Valet Button A small push button swith Prounted somewhere inside the vehicle It is used to ov e the alarm when a trans mitter is lost or damaged NT or exit Valet mode Warn Away Response Lj impacts to the vehicle will generate the Warning Zone fh It consists of several seconds of siren chirps and parki ht flashes Zone A zone is a separate input that the alarm can recognize as unique Each input to the system is connected to a particular zone Two or more inputs often share the same zone 2008 directed electronics Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet o lt Online store car audio and autogoods Winauto X L113 n QUICK REFERENC
7. description includinggagcessories the year make and model of the vehicle vehicle license number and vehicle identification number All components other than the unit including without limitationgthe siren the remote trans mitters and the associated sensors and accessories carry a of year warranty from the date of purchase of the same This warranty is non To is automatically void if the original purchaser has not completed the var QN dand mailed it within ten 10 days of the date of purchase to the address listed d the unit s date code or serial num ber is defaced missing or altered the een modified or used in a manner con trary to its intended purpose the upi een damaged by accident unreasonable use als or construction The warra not cover damage to the unit caused by installa neglect improper service SANG oRether causes not arising out of defects in materi tion or removal of the unit ted in its sole discretion will determine what consti tutes excessive damage and may refuse the return of any unit with excessive damage TO THE MAXIMUM EXTENT ALLOWED BY LAW ALL WARRANTIES INCLUD ING BUT NOT LIMITED TO EXPRESS WARRANTY IMPLIED WARRANTY WARRANTY OF MERCHANTABILITY FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY OBLIGATION OR LIABILITY IN CONNECTION WITH IT
8. send a command to the system Out of range notification If a command is issued from the remote but the remote is set to the incorrect vehicle or is beyond the range of the vehicle to receive the command the remote responds with 3 set of 2 quick beeps and the icon will flash 3 times 2008 directed electronics 13 Online store car audio and autogoods Winauto To enter programming mode Press and hold the P button until one long beep is heard Programming mode to customize the remote s response is now entered note If no buttons are pressed within 5 seconds pro gramming mode will exit with 2 beeps Beeps Vibration On Off d Press amp to select beeps vibr x Off Beeps alone vibra tion alone beeps and vibr A no beeps and vibration can be selected Refer to the d ow for these settings AN Beep Vibrate settings Y Programming response Icon display Beeps only default Siren icon On Vibrate only Vibrate icon On a and siren icon Beep amp Vibrate 1 beep and 1 vibrate No Beep and No Vibrate 1 long beep Tae siren Note This is icon display during programming 14 2008 directed electronics Online store car audio and autogoods Winauto Illumination On Off Press d to select LCD backlight illumination On Off The LCD backlight will illuminate when a remote button is pressed or an alarm status page is received LCD Backlight settings Programming response
9. successful arming of grammed on See Programming Options section Addi tionally if a door hood or trunk is triggered during the arming countdown the 30 second countdown starts over When armed your vehicle is protected as follows gt Light impacts trigger the Warn Away signal When triggered the siren chirps and the parking lights flash for a few seconds gt Heavy impacts trip a Triggered Sequence The sequence consists of the siren sounding continuously and the parking lights flashing for a pre programmed period which can range in duration from 1 to 180 seconds gt If a door is opened the system will immediately start 2008 directed electronics 17 Online store car audio and autogoods Winauto chirping the siren and flashing the parking lights Three seconds later the siren output changes to a continuous blast This progressive response gives you time to disarm the sys tem with your LCD remote if you inadvertently open the door while the system is armed while still providing instant response even if the door is immediately closed Turning on the ignition key will trip the same progressive re sponse as opening a door gt The optional starter kill prevents the vehicles starter from cranking gt Any full trigger of the alarm systemjw mediately send an alarm page to your remote in ipg you that your vehicle should be checked x Multi level security a Multi Level Securi ming allows you to select which
10. trary to the products desi d intended usage and Directed hereby expre isglaims any liability resulting therefrom f AS Arming the V 38 To arm the VRS turn the ignition to the ON position and press the arm button on the remote transmitter for one second The parking lights will flash and the siren will chirp once This can be done before driving or while driving the vehicle Once the system is armed it will initiate its triggered sequence see below if any door is opened and closed If you are forced from the vehicle the system will trigger as the door is opened and closed This is how the system works to combat intersection carjacking To protect against parking lot carjacking arm the VRS before leaving the ve hicle The system will now trigger automatically the next time you or anyone drives the vehicle This helps to protect the vehicle 2008 directed electronics Online store car audio and autogoods Winauto if someone takes your keys and remote transmitter by force in a parking lot note If the VRS system is armed while operating the vehi cle and not disarmed prior to leaving the vehicle it is still armed and will trigger the next time the vehicle is driven Triggered sequence VRS Fifteen seconds after the last door has closed the in vehicle LED will begin flashing This delay is intende llow you time to distance yourself from your vehicle in the amp yent of a carjacking e Forty five seconds later
11. 1 beep backlight ON 2 beeps bac gto F ed xO The remote control can grammed to notify the user of a Page notification page audibly beepi GNie vehicles status changes e g door unlocked engin ted vehicle violation etc On the LCD remote press select page On Off One beep is page On Two beeps is page Off When programmed off the remote will not give any notification that a page was received from the vehicle Note If programmed Off no alarms will be notified to the remote Command information armed disarmed will be noti fied to the remote To exit programming mode The LCD remote control will exit programming mode after 5 seconds of inactivity and will emit 2 long beep 2008 directed electronics 15 Online store car audio and autogoods Winauto Using your system The buttons described in this manual correspond to the standard configuration Remember this is not the only way your trans mitter may be set up It can be custom configured to meet your needs See your installer for additional details Active arming 16 You can arm the system by pressing A ur remote for one second When the system arms from A icle you will hear a short siren sound or chirp and segethe parking lights flash once If the power door locks are CS by the system the doors will also lock While the s s armed the in vehicle s status LED will flash approxi OOF once per second indicating that the system is acing CN c
12. D ABOVE Some states o aot allow limitations on how long an implied warranty will last or the exclusion o sequential damages This warranty gives you specific legal rights and you may also have n of incidental or con other rights that vary from State to State e This product may be covered by a Guarantee s Plan GPP See your autho rized Directed dealer for details of the platyor all Directed Customer Service at 1 800 876 0800 Directed security systems i 10 this unit are deterrents against possible theft Directed is not offering a guaramtedlopinsurance against vandalism damage or theft of the automobile its parts or amp A hereby expressly disclaims any liability what soever including without lintitatigr liability for theft damage and or vandalism Directed does not and ha horized any person or entity to create for it any other obligation promise duty or obligation in connection with this security system Make sure you have all of the following information from your dealer A clear copy of the sales receipt showing the following Date of purchase Your full name and address Authorized dealer s company name and address Type of alarm installed Year make model and color of the automobile Automobile license number Vehicle identification number All security options installed on automobile V V VN VN ON VY Installation receipts ii O 2008 directed electronics Online store car audio and autogoods Winauto T
13. E GUIDE 5 To arm using your LCD remote You can activate or arm the system by pressing A on your remote for one second Y When the system arms you will hear a short siren sound or chirp and the parking lights will flash once If the vehicles power door locks have been connected to the system the doors will lock To disarm using your LCD remote gt To disarm the system press y You will hear two chirps and the parking lights will flash twice If power locks are connected to the system the doors will unlock If the siren chirps either four or five times when disarming see Diagnostics section This is called Tamper Alert Arming while driving gt gt Press on your remote for two second while th yehfle is running The system will chirp once and then once more to indicagesthat ghe ignition is on Disarming without a LCD remote x gt Turn on the ignition Press and releas amp yheJValet button the programmed number of times within 15 seconds After fivgSeconds the system will disarm If it does not you may have waited too XN e ignition off and on and try again To enter or exit Valet NC gt Turn ignition to R sition then turn to OFF position Press and release the Valet button within 10 seconds The in vehicle status LED will light solid if you are entering Valet Mode and it will go out if you are exiting Valet Mode To activate Panic Mode gt Press and hold or down for approximately two seconds
14. NN ash and the siren will chirp twice If the system os the triggered sequence siren has begun chirping pressing the disarm button of the transmitter will not disarm VRS To disarm the VRS during a VRS trigger sequence 1 Turn the ignition on 2 Press the Valet button the pre x de P mast programmed number of times to disarm the VRS system note If the VRS system has begun its chirping sequence the ignition must be turned off then on to disarm If you are driving the vehicle at the time pull to a safe place away from traffic and follow the triggered sequence dis arm procedure 2008 directed electronics Online store car audio and autogoods Winauto Here we have listed only some of the many expansion options avallable Please contact your dealer for a complete explanation of all the options available to you Audio Sensor Metal on glass glass cracking and breaking glass each produce distinctive acoustic signatures The 506T audio sensor uses a microphone to pick up sounds and then analyzes them with proprietary acoustic software tofPymine if the glass has been struck Backup Battery The 520T kee en armed triggers the alarm and keeps the starter kilNgctive if main battery power is disconnected gt 9 Field Disturbance S An invisible dome of coverage is estab lished by ANS 508D radar sensor Your security system can then react to any intrusions into this field with the trigger
15. S PRODUCTS DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEAL ERS OR INSTALLERS DIRECTED SECURITY SYSTEMS INCLUDING THIS UNIT ARE DETERRENTS AGAINST POSSIBLE THEFT DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM DAM AGE OR THEFT OF THE AUTOMOBILE ITS PARTS OR CONTENTS AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER INCLUD ING WITHOUT LIMITATION LIABILITY FOR THEFT DAMAGE AND OR VANDALISM THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE REMOVAL OR REINSTALLATION OF THE UNIT OR ANY 2008 directed electronics i Online store car audio and autogoods Winauto CONSEQUENTIAL DAMAGES OF ANY KIND IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER S PURCHASE PRICE OF THE UNIT DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEV ER INCLUDING BUT NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES INCIDENTAL DAMAGES DAMAGES FOR THE LOSS OF TIME LOSS OF EARNINGS COMMERCIAL LOSS LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE NOTWITHSTANDING THE ABOVE THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CON TROL MODULE AS DESCRIBE
16. WE NO AN Oh Ek Gil User s Manual Car Alarm Python 460 Responder 3305P Two Way In the online store Winauto you also can buy Delivery in Kyiv a throughout Ukraine with payment upon receipt Archive Audio video Sound and Components Security Systems Video observation and parking Car Goods Automotive Lighting Tweak Car Chemicals and Power Supply Sale Online store car audio and autogoods Winauto Responder 460 X Owner s Guide SS O o NY SS Online store car audio and autogoods Winauto Directed Electronics Directed promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed unit hereafter the unit exclud ing without limitation the siren the remote transmitters the associated sensors and acces sories which proves to be defective in workmanship or material under reasonable use dur ing the lifetime of the vehicle provided the following conditions are met the unit was pro fessionally installed and serviced by an authorized Directed dealer the unit will be pro fessionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer and the unit is returned to Directed shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information con sumer s name telephone number and address the authorized dealers name telephone number and address complete product
17. able of contents Limited lifetime consumer warranty 4 ss 0se6 rr es oye ERR RE i 2 way LCD remote Cont osi dae arb Rod c ea eei ra p paid 1 Febr UELUT 2 Standard remote configuration 6234 pexur exa ekier ess veiw 4 Pe pda oV ris 3 Whiat is included 42s s 001s0sseveete eise turneed kie dew EA oca EAT ud ks 4 Important information ssssssessesssresesssrrrrrrrrrerrrrssereress 4 System mantenan e cud euaqe t PEE IUE EES 5 POLIT notice oss peras sd pM ena Ree eC PA RENE EPOR PEE s 6 Replacement remote controls uoo haee br e MEE ct ee Reed wes dns 7 2 way LCD remote control functions 2 ee nuce she ad Sau dus woes a a GE a RC ones 7 Standard configurations 1 way and 2 way remote controls 7 Standard LCD icon configurations 2 way only d en 9 Remote operation 3e bep FER VE Y TER E RARE IN ee ez e 12 System signal paging features P pm 12 Out of range notification thie bahia leh Se Cale aS a 13 Programming LCD remote Se oT 14 To enter programming mode Mig 14 Beeps Vibration On Off e due E A pae 14 Illumination On Off P OTTEET 15 Page notification NR AEE EEEE 15 To exit programming mod QV TCR 15 Using your system NS 16 Active arming hw T 16 Passive atiWng usetesesewewessts ur4ueke les EA YE REEF ERE Ss 17 Multi level security aziulngu s aso uus ker REY YusU
18. ber 1 and a trigger page was received for vehicle number 2 the remote will show the trigger alarm and show number 2 on the display After clearing the page press and release the program button until number 1 is displayed Now you can operate the alarm system on vehicle The door icon will display for full alarfa by flashing for a few o number 1 seconds and then display conta until the page is cleared the system is locking the doors and il the system is armed The disarm icon will flash when the system is unlocking the doors and display continuously until the system is disarmed 2008 directed electronics 11 Online store car audio and autogoods Winauto T ter functi This system uses a computer based learn routine to learn the transmitter buttons This makes it possible to assign any trans mitter button to any system function The transmitter initially comes programmed with Standard Configuration but may also be customized by an authorized dealer The buttons described in this manual correspond to a Standard Configuration transmitter Remote operation NO e The system operates at 434 MH rporates Directed s propri etary out board technology tragsc iye The high frequency combined with Binary Data comm n achieves superior range with two way communication SQ System signal Baging features 12 A page is the signal the control module sends to the remote control as confirmation of re
19. ceipt of a command or alarm system status When the remote control receives a page it will generate a page notification to the user notifications are audible beeps and or vibration and the LCD Icons will display the current system status Command Page When a command arm disarm or auxiliary channel from the remote control is sent and received the system will send a command page back to confirm receipt 2008 directed electronics Online store car audio and autogoods Winauto Alarm Page If the alarm system is triggered while armed an Alarm Page will be sent to the remote control When the remote receives an Alarm Page the LCD icons will display the alarm system status informa tion and the remote control will generate beeps and or vibration An Alarm Page alert is a series of 5 groups of 4 rapid beeps shock trunk door ignition or hood trigger and the LCD icon that caused the alarm will display The remote will beep and or vibrate every 60 seconds to alert the user he alarm system was triggered and will continue until t rm page is cleared e Page Recognition Acknowledg Q To clear a page alert notifica tio quickly press any button on the remote control This performed at any time during or after the page ENS n has occurred The remote Kw not send a command to the system at this time it will only clear future repeats of the page notification The next time a button is pressed on the remote control it will
20. cle in case of a carjacking Pleas r to the Vehicle Recovery System section of this gui a complete explanation of The optional VRS feature is designed to ensure that any unautho rized user of your vehicle even if using your keys and remote control will not be able to permanently separate you from your vehicle The VRS cannot prevent a carjacking attempt however it does ensure that if your vehicle is taken by an unauthorized user it will be disabled after several progressive warnings as safely as possible Should a carjacking occur the VRS allows you to concern yourself with your personal safety without worrying about your property 2008 directed electronics 37 Online store car audio and autogoods Winauto Directed has engineered this vehicle security system the Failsafe Starter Kill and the VRS feature to provide the best combina tion of personal safety and property protection available When properly installed the system can never inadvertently stop your vehicle in traffic or on railroad tracks while the vehicle is in oper ation It is unlike other systems that shut down your engine while it is running This system is designed to perform starter in terrupt or starter kill The Failsafe Starter Kill cannot shut down an already running engine it can VR an engine from starting in the first place important Any installation t ows this product to shut down a vehicle s engin it is running is con
21. e operation Changes or modifications not e ires l approved by the party responsible for compliance co the user s authority to operate this device Directed Electr Tested to Comply with FCC Standards 6 2008 directed electronics Online store car audio and autogoods Winauto Replacement remote controls You can purchase replacement remote controls from your Authorized Dealer or on line at the following web site www directedstore com Once you receive your new remote control please refer to instructions included on the remote packaging The LCD remote control AV NN used to send commands to the system The ni NA reflect the standard configu ration for this syst uttons can be custom configured for the user s MS s by the installer Also the user can D configure the remote for certain responses see Programming LCD Remote section Standard configurations 1 way and 2 way remote controls C Button The arming function is controlled by pressing this button for one second d Button The disarming function is controlled by pressing this button for one second 2008 directed electronics 7 Online store car audio and autogoods Winauto AUX Button Silent Mode and an optional auxiliary function are controlled by pressing this button Silent Mode works by pressing this button for less than one second before arming or disarming An optional auxiliary functi
22. ed electronics 3 Online store car audio and autogoods Winauto What is included Control module 1 four button 2 way LCD transmitter 1 four button transmitter note On both remotes the panic button is the same color V V VV YV YV Y Wire harnesses The 514N six tone programmable siren In vehicle status LED indicator ligh gt A push button Valet switch S Your warranty registration Failsafe Starter Kill readyeciPeuitry may require additio 548 T receiver UN Congratulations on the purchase of your state of the art vehicle security system This system has been designed to provide years of trouble free operation Due to the complexity of this system it must be installed by an authorized dealer only Installation of this product by anyone other than an authorized dealer voids the warranty All dealers are provided with preprinted dealer certifi cates to verify that they are authorized This owner s guide should help you to get the most out of your system Please take the time to read it prior to using the system 2008 directed electronics Online store car audio and autogoods Winauto System maintenance This system needs no specific maintenance beyond remote control battery replacement The 2 way remote is powered by a 1 5V AAA battery The 1 way remote is powered by a pair of 3V CR2016 batteries Battery Level Indicator 2 way remote The Battery Level indicator has four level ind
23. ed sequence Garage Door Remote control of your system can go beyond your vehicle You can also control your automatic garage door using the 519H2 garage door opener with your remote control Ask you dealer for details Additional parts and labor required Headlight and Parking Light Automation The 545T Nite Lite will automatically turn on your parking and headlights when it gets dark In addition the 545T will turn your headlights on whenever the windshield wipers are used A transmitter function 2008 directed electronics 41 42 Online store car audio and autogoods Winauto can also be used to turn on your parking and headlights for a programmed time Power Trunk Release The channel two output of the system can operate a factory power release for the vehicles trunk or hatch An additional relay may be required If the factory release is not power activated then Directed s 522T trunk release solenoid can often be added Power Window Control Automatic power Oy control is pro vided with the 529T and 530T systems Tilt Sensor The 507M tilt senso Be added to your system to protect your car when its p It can protect your vehicle from being lifted to i expensive rims Valet Start System QN ultimate in convenience the Valet start system ca your vehicle monitor engine functions and power your climate control system with a push of a button Over rev protection open hood lockout brake pedal shutoff and au
24. em s status as described NS Action Number of Chirps Description Arm 1 System armed Arm 1 3 second delay 1 System armed with Bypass Notification Disarm 2 System disarmed Disarm 4 System disarmed with Tamper Alert Disarm 5 System disarmed NPC active 28 2008 directed electronics Online store car audio and autogoods Winauto Table of zones The zone number is the number of LED flashes used by the system to identify that input The standard input assignments are listed below along with spaces to write in any optional sensors or switches you have had installed Zone Number Dealer Installed of LED Flashes Description Options 1 Instant trigger often used for trunk pinswitches Shock sensor input a yan ful 5 nition trigger 2008 directed electronics 29 Online store car audio and autogoods Winauto Interpreting zone diagnostics Warn Away responses are not reported by arming or disarming diagnostics If you receive a Bypass notification when arming or a Tamper Alert notification when disarming look at the in vehicle status LED Active or triggered zones will be indicated by a pattern of blinks by this LED Example If Zone 3 was active or triggered the in vehicle LED will blink three times with a two second pause Then it will blink three times again and repeat until the ignition iss amp urned on note Your system stores the last si memory If your system has been trig has been reset by t
25. hut off If the system remains in Valet Mode the LED will come back on the next time the ignition is turned on and then back off 2008 directed electronics Online store car audio and autogoods Winauto Programming Programming options control what your system does during normal operation and require few or no additional parts However some may require additional installation labor The following is a list of the program settings with the factory settings in Bold gt Active arming only with the remote or passive arming au tomatic arming 30 seconds after ch Pass door has been closed gt Arming disarming confirmati iren chirps on or off gt The ignition controlled feature on or off With this feature on the d I lock three seconds after the when the ignia doors when ignition is turned on with any door open ignition is turned op the doors are closed and unlock Ked off The system will not lock the The bitwriter I not needed to program theses separately it should be in the programming grid to do these 2 indepen dently Ignition lock and unlock are independent features and can be programmed separately Passive door locking with passive arming or active door locking only when arming with the remote Passive locking allows the vehicle s doors to lock when the security system passively arms after the 30 second countdown This feature only works if passive arming has been p
26. icators that serve as a visual indication of battery charge Whe battery reaches a low charge level that requires replacemgn th remote control will generate a single notification on the Battery Level indicator will flash continuously Cams 2 QS REPLACE EMPTY Battery Replace way remote Gently pull the end of the battery door away from the top of the remote control then slide the door up to expose the battery and remove the expired battery Place the new battery into the remote control observing the correct polarity When power is returned the remote control will display all icons in the LCD and generate all beeper tones once Press any button on the remote to termi nate the beeper tone review your warranty Your warranty registration must be returned and the bar code serial number must not be removed If the warranty registration is not returned you do not have a warranty It is also necessary to 2008 directed electronics 5 Online store car audio and autogoods Winauto keep your proof of purchase which reflects that the product was installed by an authorized dealer Make sure that you receive the warranty registration from your dealer FCC ID notice This device complies with Part 15 of FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interfergmege that may cause undesirabl
27. ing your vehicle If you hear a second chirp ade and note that the in vehicle s status LED is flashing in groups see the Diagnostics Section of this guide This extra chirp is called Bypass Notification The LCD remote responds to active arming with one beep and the icon will flash 5 times to indicate successful arming of the system If the LCD remote beeps twice after arming the system has detected an active sensor that should be checked For example a door open icon will be displayed flashing 5 times on the LCD screen 2008 directed electronics Online store car audio and autogoods Winauto Passive arming The system can be programmed to arm itself automatically called passive arming If the system is programmed for passive arming it will automatically arm 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door Whenever the system is in its 30 second passive arming countdown the in vehicle status LED will flash twice as fast as it does when the system is armed At the 20 second point of the countdown the siren will chirp to indi that the system is about to arm At the 30 second point iml lights will flash e to indicate that the system is armed The LCD remote responds one arming with one beep and oO switch prote t d trunk or hood is open the system will not passively arm unless forced passive arming is pro o indicate
28. ion key on NPC is On Off programmable See your dealer and the Programming section of this guide for more information 2008 directed electronics 25 26 Online store car audio and autogoods Winauto This system also supplies outputs that can control convenience options such as remote control trunk release and window automa tion Consult your dealer for available options for your system Channel 2 Trunk release When connected pressing for 1 5 seconds will remotely release the vehicle trunk lid Channel 3 auxiliary output When Mir As EA and will immediately activate this mS additional convenience option O The remote will respond iN notification consisting of isplays the channel number on ontrol an one long beep and for 4 s the LCD screen Thi at the remote after the system has received the comm Du activate any of the Auxiliary outputs 2008 directed electronics Online store car audio and autogoods Winauto Pj The microprocessor at the heart of your security system is constantly monitoring all of the switches and sensors that are connected to it It detects any faulty switches and sensors and prevents them from disabling the entire system The micropro cessor will also record and report any triggers that occurred during your absence Refer to the System Status Chirps and Table of Zones charts for diagnostic information Qy Arming diagnostics h Q active door open sensor If the sys
29. l go out if you are exiting Valet Mode 2008 directed electronics Online store car audio and autogoods Winauto Nuisance prevention circuitry Your system has Directed s Nuisance Prevention Circuitry NPC It prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder jackhammers airport noise etc Example If the alarm triggers three times within a 60 minute period and each time the same sensor or switch triggers the alarm NPC will interpret those triggers as false alarms After the third trigger NPC ignores or bypasses that MALA along with any other sensors or switches sharing the s ne for 60 minutes e If the bypassed sensor tries to on system while it is being bypassed the 60 minute bypass d will start over This ensures that a sensor that continu gers will remain bypassed Doors are covered differently if the alarm is triggered by an open door htee full cycles the doors will be bypassed until the trigger cases note Arming and disarming the system does not reset this function In order to reset a bypassed zone the same zone must not trigger for 60 minutes or ignition is turned on If testing your system it is important to remember that the NPC programming can cause zones to be bypassed and appear to stop working If five chirps are heard when dis arming NPC has been engaged If you wish to clear the NPC memory turn the ignit
30. m The above icons will display when a security feature has been tripped to a full alarm condition 2008 directed electronics 9 10 Online store car audio and autogoods Winauto d Icon The trunk icon will display for full alarm by flashing for a few seconds and then display continuously until the page is cleared Icon The shock sensor icon will display for both Warn Away and full alarm by flashing for a few seconds and then display continu ously until the page is cleared 3 Icon The battery icon always displays b N en charge capacity EM f remaining in the remote s MAS ES on M The vibrate icon will a splay if the remote is programmed for vibrator notific R see programming LCD remote section of the guide M Icon The ignition icon will display for full alarm by flashing for a few seconds and then display continuously until page is cleared 1 2 3 4 icon The vehicle icon always displays the current vehicle maximum of 4 vehicles being controlled by the remote If a Warn Away or alarm trigger should occur at one of the other vehicles that vehicles number will be displayed and the LCD will display that vehicles status To change back to the original vehicle selected 2008 directed electronics Online store car audio and autogoods Winauto press and release the program button until the vehicle number is shown For example If the remote was originally on vehicle num
31. nition On not allowed in some states 2008 directed electronics 35 36 Online store car audio and autogoods Winauto gt Progressive door trigger on or off When the system is armed and a door is opened the system responds with ten chirps prior to beginning the full triggered sequence If an instant trigger is desired the progressive door trigger can be pro grammed off Valet pulse count The number of presses of the Valet button required to disarm the security system AED or the VRS system can be programmed from one to five presses The default setting is one press Siren tones and chirp volume The utfut of the Revenger Soft Chirp siren consists of six di ferent tones in sequence Any of these tones can be NS ed by your dealer result ing in a unique easily 4defifiable siren sound The siren chirps can be either lume or six decibels quieter than the full alarm RN 2008 directed electronics Online store car audio and autogoods Winauto Installafi The system has many options that may require extra parts and labor Some of the possibilities are listed here gt Progressive unlocking In most cars with electric power door locks the system can be configured so that when the system is disarmed only the driver s door unlocks A second press of the button unlocks the other doors gt Vehicle Recovery System VRS VR Xan anti carjacking device designed to help in the saf redevery of your vehi
32. of the security PME Sd or sensors will be active and which will be bypassed at the time that the system is armed See the Zable 18 of Zones section of this guide Pressing amp again within five seconds of arming the security system will activate the Multi Level Security Arming feature Each time amp is pressed again a different security level is selected The different security levels can be selected as follows Press once The siren chirps once The system is armed Press a second time within five seconds The siren chirps twice followed by a long chirp Zone 2 is now bypassed 2008 directed electronics Online store car audio and autogoods Winauto Press a third time witihin 5 seconds the siren chirps 3 times then followed by a long chirp Zone 4 is now bypassed gt Press a a fourth time within five seconds The siren cirps four times follwed by a long chirp Zone 2 and 4 are now bypassed gt Press B a fifth time within five seconds The siren chirps five times followed by a long chirp All input zones except the ignition are now bypassed Hold down the to begin the ir o aca Arming cycle over again note Multi Level Security gle arming cycle Once the s re armed all the zones remote will emi al arm notification 1 beep and 5 flashes After each press of S to reach the next level of security the of the Cy icon For easiest opera
33. on such as trunk release can be controlled by pressing this button for 1 5 seconds The auxiliary output controls or Button The panic feature is controlled by eset this button for approximately two seconds e Bana P cuts XO or expansion function that An optional auxiliary co you have added to yo Oy can be activated by pressing these b buttons 3 The auxiliary output controls Program Button on rear of 2 way LCD remote only Use this button to select the vehicle to control from the remote Also use this button to configure response characteristics from the LCD remote see Programming 2 Way Remote 2008 directed electronics Online store car audio and autogoods Winauto Standard LCD icon configurations 2 way only Icon The transmit icon will be displayed while the remote control is transmitting a command to the vehicle Icon The signal icon will be displayed if a command is transmitted to the vehicle but the command page is not received Icon The receive icon will be displayed while remote control is receiving a page from the vehicle Icon O The auxiliary and sensor O display which auxiliary is oper ating or which XS Or or alarm state The garage door icon for use with optional 519H2 WARN and Icons The above Warn Away displays when a security feature has been zone 2 4 or 7 is in Warn Away tripped but not to full alar
34. re threatened in or near your vehicle you can attract attention by triggering the system with your transmitter Just press E or for approximately two seconds and you will enter Panic Mode The siren will sound and the parking lights will flash for the programmed siren duration To stop Panic Mode at any time press ik or on the remote transmitter again 2008 directed electronics 23 Online store car audio and autogoods Winauto Valet mode 24 You can prevent your security system from automatically arming and triggering by using Valet Mode This is very useful when washing the vehicle or having it serviced In Valet Mode the security system will not arm even with the remote transmitter but all convenience functions door locks trunk release etc will continue to work normally To enter or exit Valet Mode Turn the ignition NO l 2 Turn the ignition o P 3 Press and Q the Valet button wi The status LED will lightfs and it will go out i NE The remote PUN seconds y if you are entering Valet Mode exiting Valet Mode nd with 5 flashes of the A beeps on entering or exiting Valet Mode icon and 2 To enter or exit Valet Mode using the transmitter 1 Open any vehicle door Quickly press the following buttons in the sequence indicated 2 Press ry 3 Press AUX 4 Press amp again The in vehicle status LED will light solidly if you are entering Valet Mode and it wil
35. rogrammed 2008 directed electronics 33 34 Online store car audio and autogoods Winauto note When programmed for passive arming and active lock if the system is disarmed without a door being opened the system will relock the doors when it passive ly rearms gt Panic mode enabled disabled with the ignition on Some states have laws against siren capability in a moving vehicle Forced passive arming on or off If your system is programmed for passive arming and the forced passive arming feature has been programmed on the system will passively arm after one hour D been left open This feature is use e ajar when leaving the vide Qo passive arming ensures armed in every situation otected entry has a door has been left that the security system yi note When the s p ssively arms after one hour the entry point th been left open and anything con nected to thes zone is bypassed and cannot trigger the systems ver the remaining inputs to the system are fully operational Automatic Engine Disable AED on or off The purpose of this feature is to protect the vehicle from being stolen at all times regardless of whether or not the alarm is armed If AED is programmed on the starter of the vehicle will be dis abled 30 seconds after the ignition is turned off Once the key is turned off the in vehicle LED will flash slowly one half its normal armed rate to indicate the AED arming cycle Thirt
36. ta tE a a E Ea EE d 40 Security BC convenience expansions so ewo d ertrak gw a pRERG AT VR FECE Ue 41 Glossary of Tels ans gud qe ERR QEON ule ie ada Rd teed eseaneiee nes 43 Quick reference guide MM nm 45 iv 2008 directed electronics Online store car audio and autogoods Winauto s309 99 z X d ALVEL NdH 0020 r2 008 68 l30SZ3 dl 994 Screen see LCD Screen Disarm Button Panic Button Battery Compartment El Eod saad eal Pd Ex Program Button 2008 directed electronics 1 Online store car audio and autogoods Winauto GO 1 Transmit S Y 10 Battery level indicator 2 J 4 9 6 T 8 9 Out of range Receive Aux Output 2 or 3 Garage door 519H2 option Warn Away Alarm Trunk or Hood Sensor 11 Remote sending Vibrate mode Ignition Vehicle number Door Arm Disarm 2008 directed electronics Online store car audio and autogoods Winauto controls the Lock Arm Panic On Panic Off function controls the Unlock Disarm Panic Off function controls Silent Mode and ois Output 2 or e x m OR sh On Off function hold for 2 seconds Bla P located on back of the remote selects the vehicle to control and also provides user selection of LCD remote response 2008 direct
37. tem is armed while a triggering etc the unit wi once when arming and then one more time a feyms cgnds later This is called Bypass Notification NS note Bypass otification will not occur when using Silent Mode or if chirps have been programmed OFF The security system will ignore the input that was active when the system was armed until the input goes away Three seconds later the system will monitor that input normally For example if your vehicle has interior light exit delay and you arm the system before the interior light goes out you may hear Bypass Notification chirps Once the light shuts off however the doors are monitored normally 2008 directed electronics 27 Online store car audio and autogoods Winauto Disarming diagnostics Extra disarm chirps are the Tamper Alert If four chirps are heard when disarming the system was triggered in your absence If five chirps are heard a zone was triggered so many times that Nuisance Prevention Circuitry has bypassed that zone see NPC section of this guide The in vehicle status LED will indicate which zone was involved See Table of Zones section of this guide The system will retain this information in its memory and continue to chirp four or five times each time it is disarmed until ext time the igni tion key is turned on e System status chirps xO The siren will chirp wh ng disarming the system The pattern of chirps MN ly report the syst
38. tem without a remote transmitter you must have the vehicles ignition key and know where the Valet button is located Be sure to check with the installer for the location and the number of presses of the Valet button required to disarm the system To disarm the security system turn the ignition to the ON nO tion Press the Valet vs oma preset number RS C Yne to five times within 15 seconds NS seconds the system will disarm If the system does not you may have waited too long turn the ignition off and os ad try again Location of TW S Number of Pulses important The unit can be programmed to respond to one to five pulses of the Valet button for the disarm func tion Be sure to check with the installer for the desired programming The LCD remote will indicate disarm notification with 4 quick beeps and 5 flashes of the i and triggered zone icons 2008 directed electronics 21 Online store car audio and autogoods Winauto Dome light control optional security only The dome light activates for 30 seconds after the system is disarmed Ignition controlled The dome light activates for 30 seconds after the ignition is turned Off door controlled The dome light activates for 30 seconds aff r the system sees a door has closed If door was open for longer than 3 minutes the dome light will QN inate full gt The dome light activate Yo 30 seconds after seeing door closure
39. tion in reaching each level of security press R immediately after each notification Disarming To disarm the system press ii You will hear two chirps and the parking lights will flash twice If the power locks are connected to the system the doors will unlock If the siren chirps either four or five times when disarming refer to the Diagnostics section of this guide This is called Tamper Alert 2008 directed electronics 19 20 Online store car audio and autogoods Winauto The remote will indicate disarm notification with 2 beeps and 5 flashes of the _ icon If disarming after the system has been triggered the remote control will send a diagnostic notification as a reminder These diagnostic notifications are l If a sensor triggered the system the remote will emit 4 quick beeps and the LCD screen will indicate which sensor 5 flashes tripped the alarm If a switch Zone 1 3 or 5 triggered the system the remote will emit 4 quick beeps and the LC en will indicate which switch 5 flashes tripped tlfealarm If the system was triggered so imes that NPC is active the remote will emit the notifications with 5 beeps instead of 4 QY O 2008 directed electronics Online store car audio and autogoods Winauto Disarming without a transmitter This feature allows you to disarm the security system without the remote transmitter should it be lost damaged or disabled In order to disarm the sys
40. tomatic timer shutoff are all included This feature is only for automatic transmission fuel injected vehicles Ultrasonic Sensor Providing a field of protection inside your car using the 509U Ultrasonic sensor to protect your belongings 2008 directed electronics Online store car audio and autogoods Winauto Glossary of terms 1 ASK Amplitude Shift Keying a method of transmitting data Control Unit The brain of your system Usually hidden under the dash area of the vehicle It houses the microprocessor which monitors your vehicle and controls all of the system s functions Fail Safe Starter Kill An automatic switch controlled by the secu rity system which prevents the vehicles starter from cranking whenever the system is armed The ve Ag never prevented from cranking when the system is Ne should the starter interrupt swi Syri Your system is ready Nor for this feature however install ay require additional labor in Valet mode or Input A physical conne to the system An input can be provided by a sensn PinsWitch or through an existing system in the vehicle E Non or courtesy lights In vehicle status LED A light mounted somewhere in the vehicle It is used to indicate the status of your system It is also used to report triggers and faults in the system or sensors LCD This is a Liquid Crystal Display used on your remote trans mitter to display your vehicles status alarm information
41. urning NN rri your dealer can still recall the last six zones your dealer for details re triggered Contact The receiver and transmitters each use mathematical formulas called algorithms to change their codes each time the transmitter is used This technology has been developed to increase the secu rity of the unit The control unit knows what the next codes should be This helps to keep the transmitter in sync with the control unit even if you use the remote control out of range of the vehicle However if the transmitter has been pressed many times out of range of the vehicle or if the battery has been removed it may get out of sync with the control unit and fail to operate the system To re sync the remote control press of 30 2008 directed electronics Online store car audio and autogoods Winauto the transmitter several times within range of the vehicle The alarm will automatically re sync and respond to the transmitters normally i Owner Recognition is a feature available exclusively from Directed Using the Directed Bitwriter a hand held programming tool your dealer can program many of W m settings The programmer makes it possible to progr ws different settings for each transmitter that is used wi h9 system Then whenever a specific transmitter is igh en will recall the settings assigned to that transmit wner Recognition lets up to four users of the NN erent settings that meet their specific
42. y seconds later the starter of the vehicle will be disabled To start the car it will be necessary to disarm the system with the remote It is also possible to disarm the AED 2008 directed electronics Online store car audio and autogoods Winauto feature by turning the ignition key to the RUN position and pressing the Valet button the programmed number of times AED is disabled when the system is in Valet Mode Full trigger response 30 or 60 seconds This determines how long the full triggered sequence lasts Some states have laws regulating how long a security system can sound before it is considered a nuisance If your NC security system with the Directed Bitwfiter the full triggered programming the response can be programm ny duration ranging from 1 to 180 seconds Nuisance Prevention uitry on or off Please refer to the NPC section we for a complete explanation of how NPC x If NPC is programmed off the securi ty system will r spond to inputs from any sensor indefinitely note Because many states have laws regulating security systems programming NPC off may cause your system to violate state laws gt Comfort Closure Off Windows will close upon locking the vehicle Forced Passive Arming Off If passive arming is on and a door is left open the system will be armed after 30 seconds Panic with Ignition Off Prevents the Panic button on the remotes from activating panic with ig
Download Pdf Manuals
Related Search