185LEDA / 215LEDA TFT-LCD MONITOR
Contents
1. MENU AUTO W Dr 1 SOURCE Selects an input source Enters a submenu or accepts your selection in the OSD menu 2 MENU Activates or exits the OSD Moves previous menu or status in the OSD 3 amp 4 AUTO V A Moves another option in the OSD The AUTO Y button is auto adjustment function in the VGA input The up 4 button is HOLD function and stop the Trigger function 5 amp 6 VOL gt Adjust the volume or menu settings 7 OF Turns the power on or off There will be a few seconds delay before the display appears 8 LED Turned on blue color Turned off black color 9 IR Sensor Remote controller sensor CONTROLS AND FUNCTIONS OSD Menu Description All picture sound settings and setup for the monitor can be adjusted in the OSD menu On Screen Display To adjust the OSD screen 1 Press the Menu button to enter the OSD menu Press the A V buttons to select the desired option The selected option is highlighted Press the P button to enter the submenu for adjusting items Change the value you wish to adjust by using the A V buttons Press the lt button to exit the submenu for adjusting items Press the Menu button to exit the OSD menu A PICTURE CONTRAST BRIGHTNESS HUE SATURAT ION SHARPNESS COLOR TEMP Normal PICTURE MODE 4 Standard Unavailable in RGB PC Mode 10 CONTROLS AND FUNCTIONS B SOUND VOLUME MUTE VOLUME Adjust the level of audio volume O 100 M2. AS SWEDISH MPR 1990 10 MPR gt NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard do not expose the unit to rain or moisture This unit is designed to be used in the office or home Do not subject the unit to vibrations dust of corrosive gases KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising Do not cover the unit or place anything on the top of unit gt AVOID HEAT Avoid placing the unit in direct sunshine or near a heating appliance gt ELIMINATE EYE FATIGUE Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor gt BE CAREFUL OF HEAVY OBJECT Neither the monitor itself nor any other heavy object should rest on the power cord Damage to a power cord can cause fire or electrical shock FCC RF INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications H
3. apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE REAR COVER NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage with in the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTIONS CAUTION The power supply cord is used as the main disconnect device ensure that the socket outlet is located installed near the equipment and is easily accessible ATTENTION Le cordon d alimentation est utillse comme interrupteur general La prise de courant doit tre Situ e ou install e proximit du mat riel et tre facile d acces CAUTION TO SERVICE PERSONNEL POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE IN THIS PRODUCT UNPLUG THIS PRODUCT FROM THE WALL OUTLET BEFORE REMOVING THE BACK COVER AND SERVICING EMISSION CHARACTERISTICS TESTED BY SEMKO THIS PRODUCT HAS BEEN TESTED AND HAS SHOWN COMPLIANCE WITH THE NATIONAL SPECIFICATIONS SUCH
4. 185LEDA 215LEDA TFT LCD MONITOR USER MANUAL Please read this manual thoroughly before use and keep it handy for future reference CONTENTS SAFETY INSTRUCTION esse ern LS CAUTION O A EN 4 PCG RE INTERFERENCE STATEMENT sun 5 INSTALLATION cuna a E ESIA Na 6 CONNECTING WITH EXTERNAL EQUIPMENT T REMOTE FUNG HONS giurie ae 8 CONTROLS AND FUNCTIONS susanne aa 9 15 MOUNTING GUIDE EE 16 D SUB CONNECTOR PIN ASSIGNMENTS uu cece eee ee eee eee 17 POWER MANAGEMENT cccce cece ene eee eee eee eee ee eee eens ee rn nr nennen nnnnn 18 SPECIFICATION zes a een 19 TROUBLE SHOOTING GUIDE cuna tad 20 This Monitor was Manufactured by ISO 9001 Certified Factory SAFETY INSTRUCTION Important Safety Instruction Read these instructions Keep these Instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth al Oe Ole ED Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug Apolarized plug has two blades with one wider than t
5. 5 47kg 12 1 Ibs Electrical Electrical Ratings 12V 1 43A 100 240V 50 60Hz 12V 1 8A 100 240V 50 60Hz gt gt NOTE Technical specifications are subject to change without notice 19 TROUBLESHOOTING GUIDE TROUBLE TROUBLESHOOTING TIP image on display screen 1 Check that power cord of the Monitor have been connected securely Into wall outlet or grounded extension cable or strip 2 Power switch should be in the ON position and LED is lit 3 Check that the Brightness and or the Contrast adjustments of the Display have not been turned down to minimum levels NO SIGNAL 1 The signal cable should be completely message on screen connected to the video cardfcamputer 2 The video card should be completely seated in its slot and the computer is switched ON Display image is not centered too small or too large in PC mode Push the down key in front side or Auto key in remote controller Vertical or Horizontal noise is present in the picture Adjust Clock and Phase in the OSD WEEE Symbols Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from u
6. ECALL Resets the monitor settings to the factory default 1 How to unlock 1 On the front key Press the MENU and UP button at the same time over 3 seconds 2 On the Remote Controller The Remote Controller operates well because the Key Lock function is only allowed for the front key of this product 13 CONTROLS AND FUNCTIONS OSD H POSITION V POSITION TRANSPARENT TRIGGER TRIGGER AV gt m BUZZER On gt TRIGGER TIME HS LO i TRIGGER OPTION 4 High gt Selects the amount of time in seconds TRIGGER TIME that the monitor displays the trigger Input image TRIGGER OPTION Selects the type of physical trigger input See the table on Next page 14 CONTROLS AND FUNCTIONS TRIGGER OPTION N C Normally Closed The Trigger function is activated when the trigger cable is opened N O Normally Opened The Trigger function is activated when the trigger cable is closed High The Trigger function is activated when the trigger signal is DC 2 5 V Low The Trigger function is activated when the trigger signal is DC 0 0 6 V Note In this case trigger port has high status electrically so the trigger cable has to have ground or earth status to be activated 15 MOUNTING GUIDE Wall mounting Optional The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount not included in the delivery M4x10 screws Attent
7. UTE Mutes speaker sound C PC Only PC Mode CONTRAST L__ i BRIGHTNESS C E PC ADJUST gt COLOR MODE gt PICTURE MODE Standard PICTURE MODE Adjusts the vertical noise of screen image Standard Cinema Vivid RESOLUTION Adjust the resolution that an user wants x Unavailable in AV1 AV2 and HDMI Mode Only PC Mode 11 CONTROLS AND FUNCTIONS PC ADJUST H POSITION V POSITION CLOCK PHASE SEL AUTO MANUAL AUTO ADJUST Auto geometry adjustment Adjusts the number of horizontal picture PHASE 0 100 elements SELAUTO AUTO Selects the type of auto adjustment the type of auto Selects the type of auto adjustment MANUAL AUTO CS Manual Operating the auto adjustment of the screen only the first time 2 Auto Operating the auto adjustment every time the resolution is changed COLOR MODE 1 Unavailable in AV1 AV2 and HDMI Mode Only PC Mode 12 CONTROLS AND FUNCTIONS D SETUP Language English OSD Key Lock ARC TRIGGER RECALL English German French Language Sets the language of the OSD menu Italian Spanish Nederland and Korea nn atten m ey Lock Off or On Note Use remote controller to unlock AV Mode 16 9 1 1 4 3 14 9 Zoom1 Zoom2 Under PC Mode 16 9 4 3 Sets the screen ratio HDMI Input 16 9 4 3 JUST SCAN 1 Just Scan This function is only operated when DTV signal of HDMI is inputted TRIGGER See the table on Next page R
8. he other Agrounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the bsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachment accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time fp 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped SAFETY INSTRUCTION The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed no the apparatus 14 Minimum distances e g 10cm around the apparatus for sufficient ventilation WARNING To reduce the risk of fire or electric shock do not expose the
9. ion You must use four M4x10 screws to assemble this monitor and the wall mount bracket x WARNING If user use longer than M4x10 it may cause the damage on the unit Please follow instructed bolt size amp length 246 D SUB CONNECTOR PIN ASSIGNMENTS Pin Assignments rer oy e ewoo vm O ejes o D SUB gt Accessories 1 Power cord 2 Power adaptor 3 User manual 4 Cable PC or HDMI 5 Stand base amp FS4x12 screws 2EA Optional 6 Trigger cable Optional 7 Stereo cable Optional 8 Remote controller Optional 9 Batteries Optional 10 Wall mount Optional 17 POWER MANAGEMENT Power Consumption Turned Off LED Indicator The power management feature of the monitor is comprised of two stages Turned on blue and turned off Turned Off Not Operation 18 SPECIFICATIONS a 170 160 H V Horizontal 31 64kHz Horizontal 31 80KHz Frequenc q y Vertical 56 75Hz Vertical 56 75Hz VIDEO 2ch input 1 0Vp p 750 terminated loop through out HDMI High Definition Multimedia Interface VGA RGB PC TRIGGER IN PC STEREO IN AV composite Sound R amp L Active Display Area H x V 409 8mm x 230 4mm 476 64mm x 268 11mm Packing Dimensions 500mm x 375mm x 125mm 565mm x 415mm x 125mm W x H x D 19 69 x 14 76 x 4 92 22 24 x 16 34 x 4 92 Net 3 07kg 6 77 lbs Net 3 67kg 8 1 Ibs Gross 4 87kg 10 7 lbs Gross
10. ncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal 20 L39ME0351 0
11. owever there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Only shielded interface cable should be used Finally any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment gt DOC COMPLIANCE NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications INSTALLATION Before setting up the monitor ensure that the power to the monitor and other attached devices are turned off X Notice Stand amp screws are optional A Connecting the stand 1 Place the monitor with its front facing downward on a soft cloth 2 Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box FS4
12. x12 screws 3 Once assembled take the monitor up carefully and face the front side B Positioning your display Adjust the position of the panel in various ways for maximum comfort Tilt Range 3 15 I N CONNECTING WITH EXTERNAL EQUIPMENT Rear Connection Tt 1 TRIGGER IN 2 PC STEREO IN VGA amp DVI 3 amp 4 AUDIO R 8 L AV2 5 AV2 OUT 6 AV2 IN 7 AV1 OUT 8 AV1 IN 9 VGA 10 HDMI 11 DC 12V REMOTE FUNCTIONS Remote Controller Optional 1 POWER Turns the power ON or OFF There will be a few seconds delay before the display appears 2 SOURCE Selects an input source 3 ARC Aspect Ratio Control Selects a screen ratio 4 APC Auto Picture Control Selects a picture mode 5 ACC Auto Color Control Selects a color mode 6 AV1 Selects AV1 mode 7 AV2 Selects AV2 mode 8 PC Selects PC mode 9 HDMI Selects HDMI mode 10 AUTO Auto geometry adjustment in the RGB PC source 11 MUTE Mutes the sound 12 MENU Activates and exits the On Screen Display 13 EXIT Exits the On Screen Display 14 VOL 4 amp gt Increases or decreases the level of audio volume 15 UP DOWN A V Moves upwards or downwards in the OSD menu 16 ENTER Enters an OSD submenu or accepts your selection 17 INFO Displays the information about input source 18 HOLD Stops the Trigger function CONTROLS AND FUNCTIONS Bottom Key Control SOURCE
Download Pdf Manuals
Related Search