Home

INT-TSG

1. CE int tsg_u_en 09 13 Keypad INT TSG Brief User Manual Firmware version 1 00 SATEL sp z 0 0 ul Schuberta 79 80 172 Gda sk POLAND tel 58 320 94 00 e info satel pl www satel eu WARNINGS Please read this manual carefully before use Changes modifications or repairs not authorized by the manufacturer shall void your rights under the warranty The SATEL s goal is to continually upgrade the quality of its products which may result in alterations of their technical specifications and firmware The current information on the introduced modifications is available on our website Please visit us http www satel eu The declaration of conformity may be consulted at www satel eu ce The following symbol may be used in this manual note We are pleased that you have chosen a product offered by us We wish you satisfaction with your choice and would like to assure you that we are always ready to provide professional assistance and information on our products SATEL Ltd is a manufacturer of a wide variety of dedicated devices for use in alarm systems Additional information can be found on our website www satel eu or at points of sale offering our products 1 Keypad description 1 1 LED indicators LED Color Description of indications yellow blinking trouble or trouble memory the LED goes off when the partitions operated by the keypad are armed green ON all partitions operated by the keypa
2. Enter the code Some screens and functions may only be available after user authorization The authorization is code based Use the number keys to enter the code and then confirm touching the 1 ICON By default the following codes are preprogrammed in the control panel service code 12345 object 1 master administrator code 1111 When acting under duress use the DURESS type code instead of the regular user code 1 2 4 Arming screen 6 INT TSG SATEL Function Enables arming in mode full O O 5 i Enables arming in mode full bypasses d G Enables arming in mode without interior E Enables arming in mode without interior and without entry delay G 1 2 5 Alarm clearing Disarming screen Alarm clearing Disarming The Alarm clearing Disarming screen will be displayed after you touch the st iconon the main screen when there is an alarm alarm memory and at least one partition is armed Icon Function Enables alarm clearing Enables disarming SATEL INT TSG 7 1 2 6 Control screen The Control screen will be displayed on touching the Pa icon on the main screen if macro commands are assigned to at least two groups of macro commands It presents the groups of macro commands Up to 4 groups can be programmed by the installer Touching a group icon will display macro commands assigned to that group Up to 16 macro comm
3. troubles are presented the installer can configure the control panel to display the troubles until cleared Enables viewing the event log Displays the Alarm log screen on which alarms stored in the control panel memory are presented Displays the Trouble log screen on which troubles stored in the control panel memory are presented Partition status The status of partitions is illustrated by means of icons The number shown next to the icon corresponds to the partition number On touching the icon the full partition name will be presented at the display bottom INT TSG 9 Partition status disarmed there are no violated zones disarmed there are violated zones exit delay countdown is running remaining time longer than 10 seconds exit delay countdown is running less than 10 seconds remained armed mode full armed mode full bypasses armed mode without interior armed mode without interior and without entry delay temporarily blocked entry delay countdown is running fire alarm alarm fire alarm memory alarm memory Zone status The status of zones is illustrated by means of icons The icons are designated by numbers corresponding to the zone numbers On touching the icon the zone number and text information about the zone state is presented at the top of the display Zone status normal 10 INT TSG SATEL violated trouble long
4. ands can be assigned to one group If macro commands are assigned only to one group touching the f icon will display the macro commands at once In the keypad with factory settings two macro commands are programmed and assigned to the first group the figure below shows the screen to be displayed on a keypad with factory settings The control panel will execute the factory programmed macro commands provided that the alarm system is suitably configured by the installer You should consult the installer about which additional macro commands would facilitate operation of the alarm system or control of the home automation devices connected to the control panel Only the installer can program any additional macro commands Control 1 Icon Function Quick full arming without user authorization by using a code in a similar way as after pressing the O keys on the keypad with text menu Exit delay clearing in a similar way as after pressing the 9 keys on the keypad with text menu AU Ba ED 8 INT TSG SATEL The keypad can be configured by the installer so as to start the function of output control from the terminal on touching the yi icon touching the icon for about 3 seconds may be required 1 2 7 System status screen D La System status Function Displays the Partition status screen Displays the Zone status screen Displays the Troubles screen on which the current
5. appear later or even not appear at all e g when the service menu is open If the user is logged in he she will be automatically logged out a few seconds after the status screen is displayed Information presented on the status screen The keypad with factory settings presents the date and time on the status screen The installer can customize the information displayed to suit the user needs Information on the state of selected partitions zones or outputs temperature taken by selected temperature detectors date and time as well as any text can be presented on the status screen Icons illustrating the state of partitions are described in section Partition status p 8 Icons illustrating the state of zones are described in section Zone status p 9 SATEL INT TSG 3 Icons illustrating the state of outputs are shown in the table below Icon Color Output status grey deactivated red activated Additional messages connected with occurrence of specific events e g arming or disarming auto arming delay countdown entry exit delay countdown alarm etc may also appear on the status screen Functions available from the status screen Touching the status screen will display the main screen The keypad can be configured by the installer so as to display the macro commands assigned to a corresponding group on touching the corner of status screen The illustration below shows the screen parts the touching o
6. artitions are presented by means of the accordingly labeled fields The selection is made by touching the fields After you touch the field the en icon will be displayed in it the full partition name will appear at the screen bottom After the partition selection is completed touch the icon The arming procedure will be initiated in the selected partitions If a field is touched for 3 seconds the W icon will appear in all fields if the __ icon was displayed in the field the icon will appear in all fields if the wi icon was displayed in the field 2 1 3 Quick arming The installer can permit arming without entering the user code The partitions indicated by the installer will be armed The installer should be consulted whether and how the quick arming will be possible The keypad factory settings allow for quick full arming in the following manner 1 Touch the upper left corner of the status screen Macro commands assigned to the first group will be displayed 2 Touch the icon The arming procedure will begin SATEL INT TSG 15 2 1 4 Denial of arming The installer can program the control panel so that the arming procedure could not be started if azone is violated in the partition there is a trouble in the system including tamper there was a verified alarm In such a case the terminal will be displayed and a message specifying the cause of refusal Additionally the message can prompt action whi
7. ch can be taken 1 Ok on touching the key 1 you will be brought back to the previous screen arming is impossible 1 Arm on touching the key 1 the system will be armed despite the violated zone or trouble forced arming 2 Check on touching the key 2 you will be able to view the list of violated bypassed zones or troubles When viewing the list of violated bypassed zones you can bypass unbypass the currently displayed zone by touching the key 4 2 1 5 Failure of arming procedure The installer can program the control panel so that the arming procedure will fail if when the exit delay countdown ends there is a violated zone in the partition which was not violated when the arming procedure was started there is a trouble which did not exist when the arming procedure was started 2 2 Disarming If there is an alarm alarm memory disarming will result in simultaneously clearing the alarm a Touch the cm icon on the main screen Depending on the system state There is no alarm alarm memory and 1 partition is armed the user has access to 1 partition from the given keypad The partition will be disarmed ll There is an alarm alarm memory and 1 partition is armed the user has access to 1 partition from the given keypad a al aa The Alarm clearing Disarming screen will be displayed Touch the CY icon The partition will be disarmed lll There is no alarm alarm mem
8. d are armed blinking some partitions operated by the keypad are armed or exit delay countdown is running green blinking service mode is entered red ON or blinking alarm or alarm memory Information about the armed state can be extinguished after a time period defined by the installer If the installer has enabled the GRADE 2 INTEGRA GRADE 3 INTEGRA Plus option the LED will indicate alarms only after user authorization entering the code blinking of the AA LED means that there is a trouble in the system some zones are bypassed or that there was an alarm 2 INT TSG SATEL 1 2 Touch screen The screen enables communication between the user and the alarm system It displays information about the system status while allowing you to operate and program the alarm system as well as control the home automation equipment Intuitive icon based menu makes the everyday use easier Touching an icon will display the next screen or start the specified function The icon will bring you back to the previous screen Touching the gt icon will display the main screen The display backlight mode is programmed by the installer 1 2 1 Status screen The status screen is displayed when the keypad is idle It will be displayed automatically after 60 seconds have elapsed since the last operation was performed on the screen unless the terminal is running see p 12 When the terminal is displayed the status screen may
9. e displayed KKK gg 3 Touch the W e icon The last three events stored in the control panel memory will De displayed The icon allows you to view previous events 2 4 2 the selected events kenge A Touch the D icon on the main screen The System status screen will be displayed 2 Touch the icon The Event log screen will be displayed 3 Touch the sang EK D 4 9 icon The Event log selected screen will be displayed SATEL INT TSG 17 4 Touch the icon The screen presenting event types will be displayed 5 Touch the event types which are to be shown and then touch the y icon You will be brought back to the previous screen on which an extra y icon will appear 6 If only events from selected partitions are to be shown touch the E icon A screen will be displayed on which the partitions should be selected Partitions are presented by means of the accordingly labeled fields The selection is made by touching the fields After you touch the field the W icon will be displayed in it the full partition name will appear at the screen bottom After the partition selection is completed touch the icon It will take you back to the previous screen 7 Touch the y icon The last three events which are stored in the control panel memory and meet the selected criteria will be displayed The icon allows you to view previous events
10. f which can display macro commands the digit corresponds to the number of macro command group Touching any part of the status screen for 3 seconds may trigger the silent panic alarm Whether or not this function will be available is to be defined by the installer Slide show Slide show can be displayed as a background of the status screen The images to be displayed should be stored on a microSD memory card which will be inserted in the keypad slot by the installer 4 INT TSG SATEL 1 2 2 Main screen 08 07 2015 14 55 Presented on the main screen are e date and time in the format defined by the installer if some specific events occur other messages can be displayed instead of the date and time e g entry or exit delay countdown alarm messages etc e name of the currently logged user e icons enabling operation of the keypad and alarm system Icon Function Informs you that no user is logged in User login Informs you that a user is logged in name of the currently logged user is displayed below User logout Displays the Arming screen see pages 5 and 13 Enables disarming alarm clearing see pages 6 15 and 16 Enables control of the alarm system and home automation devices see p 7 Displays the System status screen see p 3 Displays the Emergency screen see p 10 Displays the Advanced screen see p 11 SATEL INT TSG 5 1 2 3 Authorization screen
11. hed successfully the system will be armed see also section Failure of arming procedure If the exit delay time is 0 the system will be armed immediately For further information on arming arming modes etc please refer to the user manual for INTEGRA or INTEGRA Plus control panels This section describes the operations which must be performed to arm the system in the full mode To arm the system in other mode you should proceed in much the same way except that instead of the icon for arming the system in the full mode you should touch other icon 14 INT TSG SATEL The installer can prepare macro commands to simplify the arming procedure especially for the system subdivided into many partitions 2 1 1 Full arming of all partitions 1 Touch the icon on the main screen The Arming screen will be displayed 2 Touch the icon The selection screen will be displayed if the user has only access to 1 partition from the given keypad the partition arming procedure will start immediately MM 3 Touch the jgf jf icon The arming procedure will start in all partitions to which the user has access from the keypad 2 1 2 Full arming of selected partitions 1 Touch the icon on the main screen The Arming screen will be displayed 2 Touch the icon The selection screen will be displayed au bd LJ 3 Touch the m og icon A screen will be displayed where you should select the partitions P
12. n of the data entered e g by using the 3 long beeps unavailable function key 1 3 3 Events signaled by sounds Only installer selected events are signaled Alarms are being signaled throughout the time programmed by the installer 5 short beeps zone violation CHIME Long beep every 3 seconds followed by a series of short beeps for 10 seconds and 1 long beep countdown of exit delay if the time is shorter than 10 seconds only the final sequence of short beeps will be generated A sequence of 7 beeps of diminishing duration repeated every few seconds countdown of auto arming delay 2 short beeps every seconds countdown of entry delay 2 short beeps every 3 seconds signaling a new trouble Continuous beep alarm Long beep every second fire alarm 2 Operating the alarm system This section describes selected operations which can be executed using the icon based menu The description does not include the user authorization which will be required when using the keypad The alarm system is operated from the terminal in the same way as when using the LCD keypad with text menu For description of the alarm system operation by means of LCD keypad with text menu please refer to the control panel user manual 2 1 Arming The arming procedure will be initiated after the user has carried out the operations described below The arming procedure will be finished with expiry of the exit delay if it is finis
13. n using the icon based menu 1 short beep touching a key on the authorization screen or selecting deselecting a field when choosing the partitions and event type 2 short beeps confirmation of executing a function command etc 2 long beeps unknown code function unavailable or return from the main screen back to the status screen 1 3 2 Beeps generated when using the terminal 1 short beep touching a number key 2 short beeps confirmation of command execution signaling of entering the user menu Submenu or function 3 short beeps signaling of starting the arming procedure if no exit delay has been programmed this is equivalent to arming disarming and or alarm clearing turning output off disabling chime signal in the keypad using the key exiting the function and returning to the menu after confirmation of the data entered 4 short beeps and 1 long beep signaling of turning output on enabling chime signal in the keypad using the key SATEL INT TSG 13 ending the function and exiting the user menu after confirmation of the data entered 1 long beep signaling of violated bypassed zones when arming fault of the vibration detector 10 24H VIBRATION type zone was not violated during the vibration detector test run upon starting the arming procedure 2 long beeps invalid code function not available or exiting the function without confirmatio
14. ory and at least 2 partitions are armed The selection screen will be displayed MM Touching the we gw icon will disarm all partitions to which the user has access from the given keypad 16 INT TSG SATEL CO D D Touching the m e icon will display the screen on which the partitions are to be selected Partitions are presented by means of the accordingly labeled fields The selection is made by touching the fields After you touch the field the Wf icon will be displayed in it the full partition name will appear at the screen bottom After the partition selection is completed touch the y icon The selected partitions will be disarmed IV There is an alarm alarm memory and at least 2 partitions are armed The Alarm clearing Disarming screen will be displayed Touch the GC icon and then follow the instructions given in it Ill above 2 3 Alarm clearing without disarming Touch the icon on the main screen Depending on the system state There is an alarm alarm memory and none of the partitions is armed The alarm will be cleared II There is an alarm alarm memory and at least 1 partition is armed The Alarm clearing Disarming screen will be displayed Touch the 4 icon The alarm will be cleared 2 4 Viewing the event log 2 4 1 Wee all events Touch the A icon on the main screen The System status screen will be displayed Me 2 Touch nol icon The Event log screen will b
15. violation trouble no violation bypassed tamper alarm alarm tamper alarm memory alarm memory tamper masking masking memory Emergency SATEL Icon INT TSG 11 Function Touching for 3 seconds will trigger the fire alarm Touching for 3 seconds will trigger the medical auxiliary alarm Touching for 3 seconds will trigger the panic alarm The installer defines whether the loud panic alarm with a loud alarm signal or the silent one without a loud signal will be triggered 1 2 9 Advanced screen Advanced LL IN In the lower right corner of the screen you will find information on the keypad firmware version Icon Function Locking the touch screen for 30 seconds to clean the screen Displays the terminal Enables updating of the keypad firmware the function is available after entering the service code Enables formatting of the microSD card the function is available after entering the service code 12 INT TSG SATEL Terminal Terminal 25 06 2013 14 33 1 A The terminal enables the alarm system to be operated and programmed in the same way as from the LCD keypad with text menu The method of using such a keypad is described in the control panel programming user manuals electronic versions of the manuals are available on the www satel eu website 1 3 Sound signaling The installer can disable the sound signaling 1 3 1 Beeps generated whe

INT-TSG

Contents

Download Pdf Manuals

Related Search

Related Contents