FA570K - Sanders Security Inc.
Contents
1. First i Alert WW WS PROFESSIONAL K14033UG 2 06 Rev A FA270VKP amp FA570VKP Voice Remote Keypad SECURITY SYSTEMS User Guide This document provides Operating Instructions for your Keypad s voice features Refer to your security system User Guide for all other security system functions and operating procedures Message Center The FA270VKP and FA570VKP Keypads feature a voice message center that lets you record and play back one message e The message can be up to 2 1 2 minutes long e The message remains in the Keypad s memory until a new message is recorded e The volume control of the message is adjustable e Refer to the procedures below when using the Message Center functions To record a message To end recording To play a message To adjust the volume Press FUNCTION 0 VOICE 1 RECORD keys The red MESSAGE indicator will light indicating record in progress Note A message cannot be recorded during the Exit Delay period Press 1 RECORD key The red MESSAGE LED will flash indicating a message waiting to be played After the message is played once the MESSAGE LED will go out Press FUNCTION 0 VOICE 3 PLAY keys The recorded message plays and the red MESSAGE LED turns off The recorded message will remain in memory until a new message is recorded Press FUNCTION 0 VOICE 2 VOLUME keys then press the desired2. ed during the Exit Delay period To Announce Faults Press the STATUS key a second time within 10 seconds of the first press Up to 3 faulted zones are announced with their zone descriptors if programmed If zone descriptors are not programmed the respective zone numbers are announced First i Alert WW NS PROFESSIONAL SECURITY SYSTEMS 149 Eileen Way Syosset NY 11791 www firstalertprofessional com Copyright 2006 Honeywell International Inc K14033UG 2 06 Rev A
3. volume control key 3 t up or 6 down Note e Adjusting message volume also adjusts status volume Volume cannot be adjusted while playing a message e Each time you enter the command to adjust the volume the word CHECK will be heard to verify the current setting Continued on Other Side Chime and Status Features Voice Chime You can set each Keypad to announce faulted opened entry exit or perimeter zones whenever the control panel s Chime mode is on by turning on the Voice Chime mode Voice Chime On Off Press the FUNCTION 0 VOICE 2 VOLUME 4 keys When on any faulted zone s causes a voice status annunciation chime and display When off the sounder still provides chime when the control s Chime mode is on Voice Status You can use the STATUS key to announce system status and display any system and or zone faults if they exist by first turning on the Voice Chime mode see above When Voice Chime mode is on pressing the STATUS key displays and announces current system status and zone descriptors programmed by your installer of faulted zones If zone descriptors are not programmed the respective faulted zone numbers are announced To Announce Status Press the FUNCTION 0 VOICE STATUS key once Voice Chime mode must be on see above The respective system status is announced e g Disarmed Ready to Arm or Disarmed Not Ready to Arm Note Status cannot be announc
Download Pdf Manuals
Related Search