Operation Manual
Contents
1. The tripod set base plate is moved by removing the two screws first and then attaching the base plate to the top or bottom Do not use any screws other than those of the tripod set base plate of this camera Use of longer screws can cause the camera to be damaged SPECI FI CATION SSM 742Al I SSM 742AI1P 1 3 Sony Super HAD CCD 537 H xX505 V 537 H X597 V 1 0Vp p composite 750hms 420 TV Lines 0 45 Lux F1 2 Controlled by a CDS sensor Mechanical IR Cut Filter More than 48dB AGC OFF ON OFF Switchable ON OFF Switchable TV System I mage Sensor Total Pixels ynchronization Video Output Resolution Day Night Switching S N Ratio Auto Electronic Shutter Back Light Compensation ON OFF Switchable Auto Gain Control ON OFF Switchable IR LED IR Distance Indoor Built in 10 IR LED Up to 40ft 12m 3 8mm 9 0mm Aspherical Vari Focal Lens Auto Iris IR D amp N Lens Made in Japan 12V DC 3 5 Amp Lead Free Power Consumption Operation Temperature 10 C 50 C Storage 20 C 60 C Temperature torage Humidity RH85 or less Dimensions 55mm W x 47mm H x 140mm L Weight 3009 Specifications are subject to change without notice Fe CE PACKAGE CONTENTS One 1 SSM 742AI1 SSM 742AI1P Camera with video power cable One 1 Operational Manual For any returns please include all components listed above with Original packaging in Resalable Condition Absol2. SSM 742Al SSM 742Al P OKINAGsa Operational Manual True Day amp Night IR Color Camera F aa Q A F If it is for an outdoor application you need to put it in a housing and turn off the LED light to avoid the reflection TE Please read the Operational Manual before attempting to use this product FEATURES 1 3 Sony Super HAD CCD 420 TV Lines Built in 10 IR LED 3 8mm 9 0mm Aspherical Vari Focal Lens Auto Iris IR D amp N Lens Made in Japan 0 45 Lux F1 2 Indoor IR Distance up to 40ft 12m Mechanical IR Cut Filter True Day amp Night 12V DC FAR NEAR ADJUSTMENT WIDE TELE ADJUSTMENT Fe CE NOMENCATURE AND FUNCTI ON 1 Lens Adjustment PUSH HERE BEFORE OPEN IT 2 IRLEDOn Off a i _ IRLEDOFF IRLED C gt 3 Description of Function L Zi 3 4 Video Connector Power Input Vari Focal Lens Level Adjustment Control Switch OFF gt CAES OFF BLC NOM Pal OFF gt AGC SW1 AES Auto Electronic Shutter OFF ON Switch SW2 BLC Back Light Compensation OFF ON Switch SW3 FL Flickerless NOM FL Switch SW4 AGC Automatic Gain Control OFF ON Switch SSM 742All_rev04152009 CAMERA MOUNTING The camera can be attached to a tripod fixer or other mounting device from either the top or bottom side by using the mounting screw holes 1 4 inch 20UNC of the tripod set base plate CAUTION
3. may expose you to dangerous voltage or other hazards Refer all service to qualified servicing personnel 8 Damage requiring service Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been dropped or the cabinet has been damaged d When the video product exhibits a distinct change in performance A OKINA USA Products are covered under warranty for one year from the date of purchase The warranty will automatically be voided if any of the following occurs 1 Camera sticker is removed If the camera sticker is removed we will not be able to confirm any information regarding when and where the product was purchased We have no other way to verify the purchase record without the serial number on the camera sticker therefore it should not be removed 2 Camera is modified in any way If the camera is scratched damaged or modified in a manner not described in this manual the warranty will be voided immediately It is the customer s responsibility to keep the camera in good condition 3 Video or power cable is cut The video cable and the power cable should not be tampered with Cutting or modifying of the cables will result in termination of the warranty SSM 742All_rev04152009
4. utely No Returns will be accepted if any component is missing damaged or if any cable is cut or tampered with A C 1 Never point the camera toward the sun Do not expose the lens directly to the sun or to strong light as this may damage the pick up device 2 Handle this camera with care Avoid any shock or bumping of the camera Improper handling could damage the camera 3 Requires a proper operating environment This camera is designed for outdoor or indoor use The allowable temperature range for operation of this camera is between 10 C 50 C and the allowable humidity is 85 RH maximum 4 Clean the front face to the pick up device It is recommended that the pick up device surface be cleaned before lens installation or whenever the lens is changed Cleaning should be done by using a chamois a very fine soft cloth lens tissue or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust 5 Check the power source voltage The power source voltage should be within the specified range Camera must meet the specifications Camera must be connected to a surge protector at all times 6 Objects and liquid entry Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock Never spill any kind of liquid on the video product 7 Servicing Do not attempt to service this video product by yourself as opening or removing covers
Download Pdf Manuals
Related Search