Ultimate Sensitivity
Contents
1. 0 NI l T Lr fr LI 1A ASUNG TECHWIN SALES NETWORK SAMSUNG TECHWIN CO LTD 145 3 Sangdaewon 1 dong Jungwon gu Seongnam si Gyeonggi do 462 703 Korea TEL 82 31 740 8137 8139 FAX 82 31 740 8145 SAMSUNG OPTO ELECTRONICS UK LTD Samsung House 1000 Hillswood Drive Hillswood Business Park Chertsey Surrey KT16 OPS TEL 44 1932 45 5308 FAX 44 1932 45 5325 TIANJIN SAMSUNG OPTO ELECTRONICS CO LTD 7 Pingchang Rd Nankai Dist Tianjin 300190 P R China TEL 86 22 2761 4724 33821 FAX 86 22 2761 6514 www samsungtechwin com Www samsungcctv com P No 26806 0762 018 VAN 06 09 7 Ultimate Sensitivity wees User s Manual Thank you for purchasing a SAMSUNG CCD CAMERA Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilate2. e Pressing the Left Right buttons will display all possible values or modes in order Keep pressing the button until the desired value or mode is displayed 4 Sdect Exit and then press the Set button to exit e The sign indicates that there is a further menu within the current mode press the Set button to move to the menu following e The sign indicates that the current mode cannot be used If an ID is assigned to a carrera it can be displayed a monitor and that carrera s cormmmunication mode can be changed when communicating with extemal devices L After the Setup menu is displayed on the rronitor press the Up Down button to nove the arrow util it is pointing to Carrera ID 2 Press the Left Right button until the current status changes to ON PCAMERA ID e f the current status is OFF the camera ID will not be displayed on a monitor even if an ID is assigned 4 Arumberfromi0 255 maybe assigned as a carrera ID Move IDnunmber cursor left right to and assign an ID 5 Once the ID is assigned select a position for ID display Press the S amp button fromthe Position nenu CAMERA ID FID NUMBER POSITION RTN PACK DISABLE BAUD RATE 9600 END Press SET to Search CAMERA ID MID NUMBER 128 bon POSITION PACK DISABLE BAUD RATE 9600 END Press SET to Search CAMERA ID FID NUMBER 128 Immun pum POSITION RTN PACK DISABLE BAU
3. 000880 1 50 1 2 000s amp L Sens Up ON CFF sdedzbe linit X128 OSD Built in Motion Detection ON CFF Buit in Alamnoutput connector RS 232C Built in SSNR Low Middle High OFF Sdectable Privacy Fundion ON CFF A Programmable Zone IRIS Control DC Video Lens Mount CSMourt C Mourt is rrourxade by using adaptor Dirrension 75 W x 65 H x 143 Dnmm Operating terrperature 10T 5070 14F 122T Operating Hurridity MAX 90 RH Weight 600g COLOR CCD CAMERA 37 User s Manual Digday OD rrenu on the screen Clear QD nenu and save anet nenu setup DECLARATION OF CONFORMITY Application of Council Directive s 89 336 EEC Manufacturer s Name SAMSUNG TECHWIN CO LTD Manufacturer s Address SAMSUNG TECHWIN CO LTD 42 SUNGJU DONG CHANGWON CITY KYUNGNAM KOREA 641 120 European Representative Name European Representative Address Equipment Type Environment CCTV Camera Model Name SHC 750 Beginning Serial NO 56060001 Year of Manufacture 2006 9 1 Conformance to EN 50081 1 1992 EMC Directive 89 336 EEC and 92 31 EEC EN 50130 4 1996 We the undersigned hereby declare that the equipment specified above conforms to the above Directive s Manufacturer SAMSUNG TECHWIN CO LTD Legal Representative in Europe Signature feee Signature Full Name YOUNG TAEK SON Full Name Position QUALITY CONTROL MANAGER Posit
4. D RATE 9600 END Press SET to Search IDwill be displayed on the top left comer of the rronitor gt Usethe 4 directional buttons to a location for the be displayed and then press the Set button Communication mode can be set for communicating with etemal devices PRIN Configure package response P BAUD Rate Set the communication speed 9600 19200 38400 5 7600 7 Sdect END and press the Set button when done Unlike conventional this carrera uses a unique SHC 750 to ckliver dearer irrages of both the subject and its background even against strong baddight L After the Setup neu is displayed on the screen press the Up Down buttons to nove the arrow to Baddight 2 Press the Left Right buttons to sdect the node suitable for the 5 purpose 5 deerer irrages when the subject is in strong backlight We do not recommend the use of manual lenses The BLC function 15 not available when a Video lens is in use Use the White Balance feeture for sareen color cortrol This product generates a signal whenever notion is detected Conneding an damdevice to L After the 54 is the UWD butt to the to the produc therefore may inas effidency Motion detection soals are outpuc Bal through the MD output port 2p the Left Right butt 1 L After the Setup me
5. anual of the device being connected for nore details Please nmake sure all the power is OFF relevant devices before making any connections St the 75Q Hi Zdwerter switch of the interrediate video receiver to H Z and the end unit device to 75Q Power requirements depend on the nidad please check the product mode nurrber and its stated power requirerrerts The power connection method is as shown below Use the adapter provided with this Vihen the resistance of the copper wire is 20 685 Copper wire size AWG 24 0 22mm 22 0 33mm 20 0 52mm 18 0 83mm Resistance value 2 m Voltage drop V m As shown in above chart the voltage drops depending on the length of the wire If the adapter output calle is too long therefore it nay interfere with the camera operations Guaranteed operating voltage of the carrera DCI2V 10 Actual voltage may vary fromthe above chart depending on the manufacturer nodd Use the 5 buttons located on the back of the product to set different functions Ee Set button VIDEO om CLASSIC 2 ONLY 1 Press the Set button to display the Main Setup menu on the monitor CHMERH ID OFF 2 Press the Up Down buttons to move the arrow up down until the arrow is pointing to the itermdesired PCARERR ID FF Use the Left Right buttons to change the current value
6. ccur under these circumstances e f the camera is directly facing a fluorescent light or if it is subject to extreme The MD output port located on the back of the fluctuations of light the White Balance function may become unstable product can be connected to external alarm devices Manual control allows finer adjustrrerts Set the carrera to ATW or AWC rroce first and then change to Manual Press the Set button Decide on the proper color tenperature and then adjust the values of Red and Blue while Observing the color changes of the subject on the sareen CLASSIC 2 ONLY This feature controls the brightness of the sareen L After the Setup menu is displayed press the Up Down buttons to move the arrow to Lens 2 The lens sdected with the Iris lens sdection switch will be displayed Gee pidure on p 13 When using a Video type auto iris lens Properly adjust the ALC control port on the lens the usual setting is Av Depending on the lens type being used it may not operate apo in AV mode If the lens does not adjust correctly set it to PEAK and adjust it by turning the LEVEL adjustment lever in the L direction little by emm little away from the middle position B aum If the right level of light cannot be obtained or if the screen s brightness fluctuates place the cursor on Video Level Search and press the Set button Press End when you find the right brightness If the right lev
7. e incesses Gain autorraically changes from upto the rreximumof 6008 OLow Gain aurorraically changes framo upto the nexinumof 54cB Avtorratically detects the levd of darkness eg at night or under low illumination and rrekes adjustrrerts to keep the screen bright and deer 1 After the Setup menu is displayed press the Up Down buttons to the arrow to 2 Press the Left Right buttons to select a Auto Autorretic Sens Up mode is sdected Press the Setup button from the Auto menu to adjust the Sens Up x2 x128 As the rate increases the screen gets brighter but the ghost image gets larger as well Shutter is not available when Auto mode is selected Low light noise is reduced in different ways depending on the mode the noise reduction laa changss fromnore to rreirmmumas the mode changes fromOff to Low Middle and Hoh SPECIAL SHARPNESS SMEAR CANCEL RESET RETURN EXIT 1 After the Setup menu is displayed press the Up Down buttons to the arrow to Special 2 Press the Left Right buttons to select node Privacy Masks seated fromthe Of Off Cn BPrvacyrroceis anaty n Press the Sc button Set an areato nak fromthe 4 in Area Sel Change the Area State of the sdected area to On H omArea Tore press the Left Right buttons to control the brightness St
8. el of light cannot be obtained and the lens is still fluctuating point the camera towards a darker area and repeat step amp To control the brightness increase decrease the Brightness value To control the diaphragm increase decrease the V Level value f an auto iris lens is used the lens selection switch on the side of the product must be set either to DC or to Video accordingly See picture on p 15 The brightness may be adjusted if a DO Video lens is used the adjustment range is 1 100 Adjust to the optimum screen brightness Some lenses may not work correctly in certain brightness levels Press the Set button to go badk to the previous Sdiect either auto or manuel shutter control 1 After the Setup menu is disdayed press the Up Down butors to move the arrow to Shutter 2 Press the Left Right buttons to a Shutter node Sect this if screen flickering oars due to a conflict between the illumination and the frequency Manual this mode for manual shutter control 3 Manual mode enables manual shutter control The shutter speed can be from1 60 sec to 1 2000 sec 02 x128 Sens up can be operated manually 4 Press the Set button when done After the Setup menu is displayed press the Up Down buttons to nove the arrow to AGC 2 Press the Left Right buttons to sdect a node As the Gain laa inceases the becorres brighter and noise lev
9. he remote jack Do not connect any unnecessary pins i e pins not in use Problems 6 Solutions If you Suspect a product malfunction please check the suggestions below If the problem persists consult the authorized retailer where this product was purchased Problem Screen is blank Solution Check if the power 15 connected and flowing property e Check if the Video cables connected properly e If you using lens check if the Iris lens switch is on DC Video It nut be on Video DO Are you using Mdeo Iris Lens Readust the Lens VR See p 28 Screen is not dear Screen is too dark Isthelens dear Wipethe lens with a dean doth or brush Adjust the monitor settings If a light shows up on the saesn Change the location or tlt of tne carrera Resdust the carrera s Back Adjust the monitor settings e Check if the connections between the networked computer teminels ae working correctly Are you using an Auto Iris lens Adjust the brightness to the proper led Carrera is behaving oddly cannot select Auto mode in Color Auto rrode in Color is Carrera surface is too hot and screen hes Black lines Is the power supplyto the carrera within the acceptable range Doss the voltage fluctuate frequently Isthe Color si to EX OryOff 2 e Isthe Gain sc to 2 e Isthe Video laa to
10. ion Place CHANGWON KOREA Place Date 2006 9 1 Date Extreme Low Light Camera SHC 750 How to use the video type auto iris lens When using a video type auto iris lens adjust image brightness by using the VIDEO LEVEL SEARCH function as follows SETUP STEP CAMERA ID OFF BACKLIGHT OFF WHITE BAL ATW MOTION DET OFF gt LENS VIDEO Press the SET button then the SETUP menu will appear Move the arrow to indicate LENS by using the UP DOWN button and then press the SET button LENS STE P BACKLIGHTNESS eene 50 V LEVEL nmm 50 PVIDEO LEVEL SEARCH Press SET to Search Move the arrow to indicate VIDEO LEVEL SEARCH by using the UP DOWN button and then press the SET button If the video type auto iris is adjusted normally an OK message will appear In order to adjust the image brightness increase or decrease the value of BRIGHTNESS or the V LEVEL When the proper brightness is found exit from the SETUP menu Refer to page 28 of the manual for a detailed explanation If an error message appears after the Video Level Search function is performed turn the lens LEVEL adjustment tab in the L direction little by little away from the middle position and then perform the function again When it is functioning normally the lens keeps opening and closing 2 If the Video Level Search function is performed with the camera facing objects that are too bright or too dark an e
11. ly products and indicates that the product satisfies the EU RoHS Directive Lj This information is provided to ensure your safety and to prevent any losses financial or otherwise Please read it carefully and use the product accordingly Ignoring this information may result in material loss and or serious personal injuries including death Indicates Never Allowed Indicates No Disassembling phis 21 Screen Text Display amp RS 485 a gt ication Technology Indicates Must Observe VEA v Night It autorratically distinguishes between day and night and switches to the appropriate mode Color mode is used during the day to produce optirmum color images B W rrode is used at night to deliver dearer irreges in the dark Y J v a A Carrera fundions ney be controlled using the or scresn text displays RS 485 corrrrunication technology enables long distance remote control of the carrera functions pea Features Extra features indude Sens Up Privacy Sharpness Srrear Gancal and Mirror Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from unc
12. nu is displayed press the Up Down buttons to the arrow to 2 Press the Left Right buttons to node OVO Choose fromthe three modes shown below PHOTION DET OQATW Qreof thetwo modes below can Seated Use when the olor terrparature is between 1800 10500K 3 Press the Ext button to save the settings and exit Use when the color terrperature is between 1600 10500K To find the opinum s amp ting for the illurrination point the carrera ata piece of white paper and then press the Set buton Repesit the poces when theillurrinetion changes Perform a lengthy test after setting MD to confirm everything is operating properly Use of the MD feature is not recommended if the camera is subject to direct fluorescent light or extreme fluctuations of light malfunction may occur Sudden changes in subject illumination due to flashlights or fluorescent lighting being turned on off may cause malfunction Other automatic algorithm execution speeds may slow down when the motion detection feature is active The White Balance may not function properly under the following conditions This feature is NOT suitable for fires burglary or e If the subject s environment has very high color temperatures e g clear sky or other similar security purposes The manufacturer sunset will not be responsible for any accidents or loss that f the subject is in a dark environment may o
13. o low Motion Detection feature is not working Color is Off FAN DO NOT WORK is flashing on the sateen e Is the Motion Det st to Off e Isthe MDled too low e Isthe MD Area Siting correct Is the crea fadng the sun ora fluorescert light e san Auto Iris lens used Check the connection between the lens connector and Chexk if the Fan is working Change the Fan if it is not working COLOR CCD CAMERA 36 User s Manual m4 Product Specification NTSC SHC 750N PAL SHC 750P POVVER DC 12V 10 16 8V Total Pixels x 50O V C HfedivePixels 658 H x 496 V D Sz 1 2 MAD Scanning System 2 1 Intela Synchronization n Frequency Horizontal 15 7344 Horizontal 15 625 Vertical 59 947 Vertical 50 007 Resolution A20TV Lines Color 480 TV Lines BAW Video Output 1 045750 LOVp p 75Q2 Mdeo 0 714Vp p Sync 0 286V p p Mdeo 0 7 Sync 0 3Vp p SIN Y signal 50B AGC Off Weight ON Min Illurrinetion Color 0 008 Lux F1 2 50 IRE 0 0005 Lux 0 000003 Lux Sere up 128X Day amp Night BVV COLORYAUTO Filter Auto Chengey EXT E Exterrel Day Night mode control capability via terrina at the badk pand E Gain Control Low Hoh OFF Sdectable C BC Back Light Compensation H White Balance ATW AWC Martal 1800 10 500K 1 Hectronic AUTO MANUAL AUTO MANUAL shutter speed 1 60 1 2
14. ontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal MW ITA for proper installation and to prevent possible fire or electric shock Please consult an authorized retailer for any installation questions Using the product in an incorrect emrmet nay If it is not property supported the product nay fall dectric shock darrage to the produd It nay cause dectric shock It nay cause fire or damage the product s gt xq Q Do nd eposthe product to etrerehest or cold Temperatures outside its operating terpercture range 10014 50011227 may reduce irrage quality cause product melfundion Pay attention to Ventilation around the product in warmlocatiors Audueting light levels caused by an unstable fluorescert lanp for sane may cause product rrelfundion aOR This i
15. ors in the subject image even under ultra low light conditions This is suitable for 24 hour outdoor surveillance where available light levels can get exrerrely low Color O O08Lux FL 2 B W O O005Lux F1 2 hA gt 750 DEP The high performance DEP capability of the SHC 750 effectively eliminates low light noise and produces not only dearer irrages but also sharper colors The resulting irrage is Vivid and precise VAM Detection PUN A The product s Motion Detection feature detects moving subjects and generates a signal accordingly An alarm device may be connected directly i e with no external sensor to the product for nore effective seaurity 244 gt Drive DC Drive Lens a A Video drive lens or DG drive lens is byasinple switch contol The brightness of the video lens can be adjusted without fine VR adjustments plq ay Super Noise Reduction A gt Samsung original SSNR technology effedively elirrinates low light noise increases horizontal resolution and the S N ratio The resulting is dear and vivid even in low light conditions Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents Samsung Techwin s will to create environment friend
16. otector from the product and fit an auto iris lens by screwing the lens in dockwise 5 Insert the connector jad lt now soldered to the lens cable into the lens connector port located on the side of the produt 6 Set the lens sdection switch located on the side either to DC ar to Video according to the type of auto iris lens now in use Check if the lens to mrourted is the Cnourt CSrrourt type The default setting of this carrera is for a C amp rrourt lens and minor adjustrreris are required before a C rrourt lens can be used e When using a C amp Srrourt lens Remove the front glass jorotector fromthe product and fit CSrreurt lens by screwing the lens in dockwise Use lens holders that look like the pictures shown below An incorrect fit between the lens and its holder may result in internal damage to the product or unstable installation lere srreller CS rrourt lens srreller Using a heavier lens may result in an imbalanced camera and or cause product malfunction Limit the lens weight to 450g 16 or less To use ALC Av mode is strongly recommended e When using lens 1 Rne the frort gas protector fromthe product and fit adapter by screwing it in dockwise Connect the video output port located on the back of the product to a monitor The actual connection method depends on the peripherals please refer to the m
17. ral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than that specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes v5 44 for Extrerre Light gt s Leo A 1 2 inch Electron Multiplying Charge Coupled Device EMCCD and advanced digital signal processing technology are employed to produce sharper shapes and col
18. rror message may appear
19. s the most inportart part of the anea Be careful not to leaveanyrrarks inducing fingarpints onthe gass Excessive light nay cause fetal darrage to the CCD Veter inside the carrera may cause product rrelfundion 1 1 2 inch Ultra Low Light CCD SHC 750N Color Carrera c06008660009959065009006000600209050 2 Connector Plug for Auto Iris Lens Groove for Tripod Mount Used to secure the carrera cese on a tripod mount loasen the screws located on the bottom of the tripod and the carrera to it Grrourt Lens Adapter Used for mounting C rrourt lens Back Focus Control Screw Adjusts badk foaus Auto Iris Lens Connector Comnector port for auto iris lens Groovefor Tripod Mount Used to rrourti the carrera on a bracket or a tripod The gz of the stems for this groove is as follows ISO stancara 1 4 20 UNC 20 THREAD L 4 5mm 0 2mm ISO standard or 0 197 ASA standard The Tripod anchor can be relocated to the top or the bottom Always use the screws provided to secure the camera Otherwise mounting may not be properly secure or internal damage might occur 9 Function Buttons Set button For displaying the menu Press to confirmsdections or changes nade Up Down button For the sareen cursor up down to set menu Left Right button For moving the sareen cursor left right to change sdiected itamvelues 69 Power Larp The lanp tums on when
20. sources Oirrage Irregerray be reversed borizortally or vertically HFev Paes the inag borizortally Paese the vertically HRe Reverse the image both horizontally and vertically Sharpness Values are 0 31 The lower the vaus the more vivid and sharp the image If the Sharpness led is too low the image may look unnatural or noise nay oar Cna DGain vauss are O 100 As this velue decreases the srrear gets stronger and shanps and u wesa Too a levd naydgoattheinage Smear Cancel 150 Reset Res all settings back to the rranufacturer s defauits Raum Savesthe menu and moves to the Setup menu Sawesthemenusatings and ests the program e To Rerrotely Control Function Buttons Connect rerrote jack to the Rerrote port located on the back of the product and wire it as shown below Extermal device eg computer buttons may act identically to the carrera buttons and performthe sane functions CLASSIC 2 ONLY Motion Detection Signal output laa 10A lower 4 0 5 0 When motion is detected 5 0 5sec In order to contol a DSN filter using external 5 Bt node the sytem mst satisfy the following aiteria Dayrrocde DSN port nut NOT be located reer the port GND port Nigt DSN port mut comecdedto the port Please turn the power OFF before plugging unplugging t
21. the arca G2 fromthe Top DowryLeft Right nenu and press the Set button gt SSHE HIDDLE 2 Press the Left Right buttons to sdect node PRIVACY AREA SEL AREAL CQOff Noroiseredudion AREA STATE Low Lowroiseredudion with amot no ghost image TOP DOWN Probably the mot practical mode with enough noise reduction and not too RIGET much ghost inage QHgh Maxrrumroise redudion but the ghost image incregeses as wal Sdect Color or BW node Always color irrages Always provice irrages in B VV If you press SET a neu will appear in wich When AGC is Off the SSNR amp Sens Up features are not available you can tum the BURST signal ONOFF By adjusting ON OFF you can meirtain or dininate the BURST signal Auto Use ador and switch to B W only when illumination laa gets very low The filte can be hanged by signals fromettemal devices When using a video auto iris lens and if the lens level is set to low automatic switching between Color mode and B W mode may not work properly e When the Gain menu is Off the Color B amp W auto switch feature is not available When the Gain menu is Off only Color B amp W Ext may be selected from the Day Night menu When switching between Color and B amp W the OSD key will be disabled for about 3 seconds for safer operation of the product When infrared light is used camera focus may not be as good as when using other light
22. the power is properly connected DSN Input MD Output Port For etemal signal input to enable DaySNight mode filter control For motion detection signal ouput to improve arty effectiveness Power Input Connector Connect the adapter provided with this product here be sure to match the H of the port Rerrote Port Comect devices here to control the 5 fundiion setting buttons rermotdy Auto Iris Lens Sdedion Switch Set to DC or Video according to the lens in use B Video Output Port For Video signal output connects to a monitor Video input port a Lenses are sold separately Auto iris CS mount or C rrourt lenses may be used For maximum utilization of the product s features we recommend the use of a DC type auto iris lens Any dirt or smudges including fingerprints may reduce the picture quality in low light conditions please keep it clean 1 Srip the outer layer of the lens cable for about 8mmY 0 3in fromthe end 2 Srip the inner layer of the cable for about 2rmm 0 08in fromthe end 3 Rerrovethe cover fromthe lens connector jadk and solder the cable to the jadk pins Video type DCtype No 1 Pin Red Power source 1 Pin Damping No 2 Pin N C 2 Pin Damping No 3 Pin White Video signal No 3 Pin Drive No 4 Pin Black GND 4 Pin Drive 4 Replace the cover to the lens jak Remove the front gass pr
Download Pdf Manuals
Related Search