GoRave RE1 User Manual and Specifications
Contents
1. The power supply cord or plug has been damanged Objects have penetrated or liquid has been spilled on the unit The unit shows signs of improper operation The unit has been dropped or damaged in any way Do not use this unit near water Allow for a minimum 10 cm or 4 inches or unobstructed clearance around the unit for proper ventilation Do not place the unit on a bed sofa rug or similar surface capable of blocking the ventilating openings in the enclosure Keep the unit away from radiators heat registers stoves or other applianc es capable of producing heat Only connect the unit to a power supply that matches the type and voltage specified on the product label Do not modify the supplied power cable Do not crush pinch bend heat or damage the power cable in any way Disconnect the unit from power during a lightning storm or if the unit is to sit unused for a long period of time GBRave 1 Introduction Unlock big sound from your computers phones tablets and televisions GoRave RE1 Wireless Audio Receivers receive wireless audio signals via an Audio Sender plugged into your mobile device or computer The RE1 decodes the signal then sends it to an amplifier or speaker from its stereo RCA outputs CD quality sound from games movies video and music apps Instant start plug in an Audio Sender and press play Low latency signal gives instant audio response for games and videos No WiFi ne2. of purchase except this warranty shall apply only to the original purchaser PLEASE RETAIN YOUR SALES RECEIPT AS IT IS YOUR PROOF OF PUR CHASE COVERING YOUR LIMITED WARRANTY THIS WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE Defective units will be repaired or replaced without charge at Lewen s discre ion with a like or comparable product by the Dealer if presented with proof of purchase to the Authorized GoRave Dealer from whom the GoRave RE1 was purchased Any repair or service performed by any person or entity other than GoRave is not covered by this limited warranty Transportation costs are not included in this warranty This limited warranty becomes void if the product has been damaged by alter ation misuse accident or neglect or the product has been repaired or serviced by persons not authorized by Lewen THE FOREGOING CONSTITUTES THE ONLY WARRANTY MADE BY GORAVE WITH RESPECT TO THE PROD UCT AND IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED Any implied warranties including without limitation any implied warranties of merchantability or fitness for any particular purpose imposed under state law are limited to the duration of this limited warranty GBRave Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not be applicable to you Warranty void if RE1 enclosure has been opened LEVVEN ASSUMES NO LIABILITY FOR PROPERTY DAMAGE RESULT
3. the Receivers the device has connected to In the app you can control the volume of each Receiver as well as Master Volume up down 9 Playing audio from a MacOS computer USB Audio Sender os za ropa Insert the USB Audio Sender into the Mac s USB port Play some audio on the device Click the Apple in the top left corner of the screen and choose System Preferences Click on Sound In the Sound settings screen click the Output tab Select SKAA Transmitter from the list of audio output devices Adjust the volume to desired level Play an audio file on your Mac and follow the Favorite List process in Sec tion 6 to add this USB Audio Sender to the RE1 Receiver s Favorites List After you add the USB Audio Sender to the Favorites List press the Con nect button four times to return the RE1 into All Play mode 10 Playing audio from a Windows computer USB Audio Sender a Insert the USB Audio Sender into the Windows device It will automatically install the required drivers and enable wireless audio transmission GBRave 9 Play some audio on the device Adjust the volume on the device to desired level Follow Section 6 to add this USB Audio Sender to the Audio Receiver s Favorites List After you add the USB Audio Sender to the Favorites List press the Con nect button four times to return the RE1 into All Play mode Go to http gorave com support and select the Audio
4. to activities or conditions that could result in loss of data or damage to your device Safe Use and Operation of Your Device Do not operate this equipment near any sensitive medical devices This equip ment emits stray RF energy and will interfere with the reception of signals by airborne navigational devices or medical devices Warning Use only grounded AC power cords Immediately disconnect the power from the unit if it emits an unusual odor sound or smoke Warning Do not disassemble repair or make any modifications to your device Disassembly could result in bodily injury or property damage Warning Never allow children to play with the device Misuse and rough han dling of the device could result in serious bodily injury Always keep accessories and components out of the reach of small children as small parts might present a choking hazard GBRave Caution Never raise the sound volume level too high when using your device with earphones Excessive sound volume level could cause permanent damage to your hearing Warning To reduce the risk of fire or electric shock do not expose the unit to moisture or water Do not allow foreign objects into the device s enclosure If the unit is exposed to water or a foreign object penetrates the enclosure immedi ately disconnect the power and take the unit to a qualified technician for repairs Immediately stop using the device and have it inspected by a qualified techni cian if
5. GBRave BIG AUDIO UNLOCKED RE1 Wireless Audio Receiver A product by Levven Lewen Electronics Ltd 9741 54 Ave Edmonton Alberta T6E 5J4 Canada Phone 780 391 3000 Visit gorave com GBRave FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment uses and can radiate radio frequency energy If not installed and operated in accordance with the instructions it may interfere with radio communications There is no guarantee that interference will not occur in a particular installation If this equipment does interfere with radio or television reception the user may be able to correct the problem by one or more of the following measures Reorient or relocate the receving antenna Increase the distance between the equipment and the receiver Use equipment on a circuit to which the receiver is not connected Consult your dealer or a qualified radio television technician for help WARNING Only peripherals complying with FCC class B limits may be attached to this equipment Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired o
6. ING FROM FAILURE OF THIS PRODUCT NOR ANY LOSS OF INCOME SATIS FACTION OR DAMAGES ARISING FROM THE LOSS OF USE OF SAME DUE TO DEFECTS OR AVAILABILITY OF SAME DURING SERVICE NOTE This warranty applies only to products purchased and serviced within the U S A and Canada Warranties outside these countries are as defined by the authorized GoRave Distributor for your country or region and may vary from the above in terms and or length Thank you again We hope you enjoy your GoRave Big Audio Unlocked Visit http gorave com and share your GoRave stories with us GBRave
7. Sender guide for a quick video tutorial on this topic 11 Select a different Audio Sender when another is already playing a b The easiest way to change audio sources is to disconnect the Audio Send er from the first device then connect and play from a second Activate All Play mode so the RE1 will automatically play from any trans mitting Audio Sender in the favorites list To manually control audio playback from the RE1 i single click the Connect button to switch to the next transmitting favor ite Audio Sender or ii double click on the Connect button to switch to the next transmitting non favorite Audio Sender 12 Reset Clear All Settings To clear all saved Audio Senders from the Favorites List press the Connect button six times The LED status indicator will flash red the RE1 s Favorites List will be cleared and volume settings reset This lets you add new Audio Senders to the Favorites List 13 Additional Notes a b A GoRave RE1 can save up to ten 10 GoRave Audio Senders in its Favorites List The RE1 will auto add an Audio Sender to its Favorites List if you play from it for 30 minutes Through the Audio Sender the GoRave volume control app will identify the available RE1 Audio Receivers your device can play to Go to the App Store and search GoRave to download the app GBRave 14 Troubleshooting 14 1 General Concepts Most issues in audio systems are result of inc
8. dio Sender Disconnect the first Audio Sender and start playback with the second Press the Connect button 6 times to clear the Favorites List and reset volume settings in the RE1 Is the device with the Audio Sender turned on Is audio actually playing on your device Start playback of audio on your device Do you have more than one RE1 Audio Receiver installed in your space Is your audio playing from speakers connected to the other Audio Receiver Does the GoRave app on your device show the Audio Receiver you want to play to If not follow Section 6 to add your Audio Sender to the Favorites List for that RE1 The Audio Receiver may be receiving a signal from another Audio Sender at low volume or mute Stop audio playback from the other Audio Sender by disconnecting it from its device Alternatively press the Connect button 6 times to clear the Favorites List and reset volume settings in the RE1 14 4 Interrupted or Poor Quality Audio Playback Playback from a source connected to the RE1 via the wired auxiliary input will take priority over input from wireless Audio Receivers Crackle or static in the speakers may result from connection problem with Audio Sender This can happen if you re holding your device and pushing moving the Audio Sender with your fingers Unexpected pauses or drops in playback can result from the Audio Sender being out of range from the Audio Receiver 14 5 LED Indicator Is Continuousl
9. is now transmitting a lock code for the cluster d Connect power to the slave RE1 Receivers They will receive the cluster lock code from the master e When the LED on the master unit stops flashing the cluster has been saved Power off all of the units f For each RE1 connect the RCA outputs to speaker or amplifier inputs and set the volume control of the amplifier or stereo system to minimal g Turn onthe RE1 master and slave units You should hear audio from your source playing from each connected speaker in your RE1 cluster h Ifa new source is desired at a future point it must be selected by pressing the Connect button to cycle through the sources in the Favorite List of the master unit GBRave To reset a slave RE1 to function as an independent i e remove a slave RE1 from a cluster a Power off all of your RE1 Receivers b Press and hold the Connect button on the unit you want to remove from the cluster and power it on c When the LED Status Indicator starts flashing let go of the Connect button d Restart the unit it will function as an independent instead of a cluster slave e Restart the other RE1 Receivers and resume playback 16 Warranty 1 YEAR LIMITED WARRANTY Lewen Electronics Ltd Lewen warrants that the GoRave RE1 Audio Receiv er you have purchased shall be free of any defects in parts and workmanship if used under normal operating conditions for a period of one 1 year from the date
10. n pair an Audio Sender to an RE1 upstairs and pair a second Audio Sender to an RE1 downstairs Using the Favorites List like this allows two different audio streams to play at the same time one playing upstairs and a different one playing downstairs To add your Audio Sender to the Favorites List of a particular RE1 connect the Audio Sender to a device and start playing audio The LED status indicator on the RE1 should be a dim amber or dim green to indicate that it is exploring for new Audio Senders Double click the Connect button on the RE1 to search for the transmitting non favorite Audio Sender The LED indicator will flash bright amber when it discovers the Audio Sender signal When you hear your audio playing from your loudspeakers press and hold the Connect button for four seconds to save your Audio Sender in the Favorites List The LED status indicator will turn solid green to indicate audio is playing from a favorite Audio Sender After you add the Audio Sender to the Favorites List press the Connect button four times to return the RE1 into All Play mode 7 All Play Mode All Play mode is the easiest way to use GoRave when you have more than one Audio Sender in your space After you add or remove an Audio Sender from an RE1 s Favorites List press the Connect button four times to put that RE1 in All Play mode The LED status indicator will turn red Now the RE1 will automatically play from any tra
11. nsmitting Audio Sender in its Favorites List without having to manually press the Connect button Play with one Audio Sender at a time for RE1 Receivers in All Play mode Dis connect the first Audio Sender when you want an RE1 to detect and play audio from a second Audio Sender 8 Playing Audio from a Smartphone or Tablet Device Go to http gorave com support and select the Audio Sender guide for a quick video tutorial on this topic GBRave Insert a mobile GoRave Audio Sender into your smartphone or tablet Optional open the GoRave app Note the GoRave volume control app needs to be open but can be minimized when you are using the 30 pin Audio Sender with a 30 pin Apple device The first time you connect a 30 pin Audio Sender you will automatically be taken to the iTunes Store to download the app for your device Start playing audio on the device At this point the device is transmitting audio via the Audio Sender If the Audio Sender is the only one transmitting and it has been added to your RE1 s Favorites List your audio will play from your loudspeakers If the Audio Sender has not been favorited follow the instructions in Sec tion 6 to add your Sender to the Receiver s Favorites List If the Audio Sender is not the only one transmitting and your RE1 is play ing audio from another source follow the instructions in Section 6 to hear audio from a different Audio Sender The GoRave app will list
12. orrect connections or improper control settings If you encounter problems isolate the area of difficulty check the control settings determine the cause of the fault and make the necessary changes Check the following conditions if you are unable to get sound from your GoRave Receiver 14 2 No Power a Is the GoRave Audio Receiver connected to power b No main power to the GoRave RE1 LED is off c Check AC power connections at the amplifier and the AC outlet 14 3 No Sound If the GoRave RE1 is powered on but not producing sound check the LED indicator If LED indicator is dim amber or dim green a The RE1 Audio Receiver is waiting to receive a signal from an Audio Sender The GoRave RE1 Amplifier Receiver is looking for a new Audio Sender Select and insert an Audio Sender into a device and play music d When you hear your audio press and hold the Connect button for 3 seconds to save that Audio Sender to the Favorites List The LED status indicator will turn bright green e Use The GoRave App to confirm that the Audio Sender you are using is connected os Is the volume on the device set too low Is your device on mute Increase the volume on your device Is your device on mute Turn off the mute function Is your device further than 30 feet 9 1 meters away GBRave Bring the transmitting device closer to the RE1 Audio Receiver Is another device transmitting at low volume from another Au
13. ou connected to your RE1 If the LED indicator on the RE1 is green and you are not hearing your audio double click the SKAA button on the RE1 to have it search for your Audio Sender 5 Connect Button and LED Status Indicator Connect Button Status LED Indicator Single Click Playing or waiting to play from an Audio dim waiting Sender on the Favorite List bright playing Double Click Playing or waiting to play from an Audio dim waiting Sender that has not yet been added to the bright playing Favorite List Hold Add or remove an Audio Sender from the to added Favorite RE1 Favorite List by pressing and holding flash deleted the connect button for 4 seconds 4 Clicks RECOMMENDED Put the RE1 into All dim waiting Play mode to play from any Favorite Audio bright playing Sender without manually pressing Connect button each time 6 Clicks Clear the Favorites List and reset volume flash list reset settings 6 Favorites List RE1 Audio Receivers can save a list of favorite Audio Senders If an Audio Sender is not on the favorites list the RE1 may not play your audio Go to http gorave com support and select the Audio Sender Favorites List guide for a quick video tutorial on this topic The Favorites List exists so you can create an exclusive relationship between GBRave an Audio Sender and an RE1 Audio Receiver You ca
14. peration Changes or modifications made to this equipment not expressly approved by us or autho rized parties could void the user s authority to operate the equipment IC Statement This Class B digital device complies with Canadian ICES 003 Cet appareil num rique de las classe B est conforme la norme NMB 003 du Canada This device and its antenna s must not be co located or operated in conjunc tion with any other antenna or transmitter EU Declaration of Conformity Lewen Electronics Ltd declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004 108 EC GBRave Safety Instructions There are two categories of safety instructions included in this manual Product Warnings ie what must never be done to assure avoiding those hazards that could cause bodily injury or property damage and User Directions i e what must always be done to assure the safe use of your device The Safety Instructions in this manual have been categorized with the following Signal Words Danger indicates that failing to observe the Safety Instructions could result in death or catastrophic bodily injury Warning indicates that failing to observe the Safety Instructions could result in serious injury Caution indicates that failing to observe the Safety Instructions could result in minor injury or property damage Note designates important information related
15. twork needed for audio playback Long 30 foot wireless range means you can keep your device playing with you as you move about your home Play directly from your device using controls and apps you already know Works with Apple Android Windows and MacOS devices 2 Compatibility The GoRave RE1 Wireless Audio Receiver is compatible with Windows and Apple computers with standard USB A port use a GoRave SUSB Audio Sender to transmit wireless audio from your computer Android devices with micro USB port use SAA Audio Sender Apple devices with Lightning connector use SAL Audio Sender Apple devices with 30 pin connector use SA30 Audio Sender 3 Specifications 2 audio channels 16 bit 48KHz Radio operates at 2 4GHz RCA output 1 6 to 2 1 Vrms Frequency response 20Hz to 20kHz THD N 0 03 1 kHz SNR gt 91dB A weighted Power requirement 5 6 5V 600mA 100 240VAC Dimensions 3 2 wide x 3 4 deep x 1 1 high Weight 1 5 lb shipping weight is 5 Ib GBRave 4 Quick Start Guide a Connect an Audio Sender to your device Android Apple Windows Mac or TV and start playing an audio track Connect the RE1 Wireless Audio Receiver to a power source Connect the RE1 s RCA audio outputs to an unused input on your home stereo system or other amplifier speaker combination The RE1 will recognize and bond with the signal transmitted from your Audio Sender You will hear your audio playing from the speakers y
16. y Flashing Fast Blink The LED indicator will continuously flash with a fast high frequency when one of these conditions is detected GBRave The GoRave RE1 was set to operate beyond its specifications To resolve the issue try Lowering the volume Reseating remove then reconnect the wireless Audio Sender Tum the power to the GoRave RE1 off then on The fault protection circuit has shut off the amplifier This occurs only when there is faulty speaker wiring or a problem with overheating Unplug the system and wait for the amplifier to cool Correct the cause then reconnect the power The GoRave RE1 will reset If the problem is not corrected or reoccurs contact your professional installer 15 Creating a Cluster One RE1 Receiver can be set to control up to three others receivers in a cluster When clustered operation of the slave units i e audio source and volume are directed by the Connect button on the master unit and volume control from the source device When a preferred source is selected from the Favorite List on the master the slave units in the cluster will switch to the same source a Power off the RE1 Wireless Audio Receivers you want to cluster b Connect an Audio Sender and start playing audio at maximum volume from your source device c While pressing down the RE1 s Connect button power on the master unit When the LED status indicator starts flashing red let go of the Connect button The unit
Download Pdf Manuals
Related Search