Home

Parquet catalogue

1. Parquet Finish Solutions Hessel f COATINGS 2 NATURAL LIVING Natural Living Wood is a natural product and the most environmentally friendly raw material and buil ding material which is available to us Wood has become indispensable for completion of interiors because wooden floors offer all the features one could wish for they are noise and heat insulating hygienic pollutant absorbent warm underfoot and resilient With wood one feels comfortable Wood can be customised easily within your own four walls and therefore influences your well being Wooden floors are natural air conditioners because wood absorbs pollutants from indoor air and has a positive effect on the indoor climate and thus on your health and well being Wood has favourable thermal characteristics Even at relatively low surface temperature the surface of the wood is still cosy Dust and dirt do not stand a chance on wooden floors The floors are easy to clean and can be kept hygienic for years Another advantage of wooden floors they are non static After years of use and much stress and strain wooden floors can easily be renovated to look like new again La c PARQUET INDIVIDU Al o Parquet individual and exclusive The sheer diversity of wood types available their colour and texture variations make every floor unique Elegant sensual and individual comes to mind when characterising
2. H PRIMER WHITE OIL Lut TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds ChemVOC FarbV Decopaint fahig Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Emission tested building product according to DIBT rules German Institute for constructional engineering associated with Hesse Hydro lacquers 2 157 0 61 General technical approval surface coating for parquets and wooden floors Status 08 05 13 Fields of application In the living area for parquet and wooden floors as translucent base coat under Hesse PURA ONE or PURA NATURA primarily on oak Handling guidelines Single to double coat application with 20 40 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 150 180 dust removal Intermediate sanding single disk sander grain size 180 240 with sanding disk white pad dust removal Material dries by oxidation please observe the general guidelines for processing Handling interval 1h Drying Good ventilation necessary Recoatable after 16 h 20 C Applicati
3. Decopaint Regulation ChemVOCFarbV The solvent based colours and lacquers regulation Chem VOCFarbV better known as Deco Paint Directive is the implementation of the EU Deco Paint Directive 2004 42 EG in German law and applies under the VOC regulation solvent consumption max 5 t a in Germany It concerns the coating of components such as windows doors floors stairs wall and ceiling coverings Furniture is excluded from the Deco Paint regulation As of 1st January 2007 lacquer manufactu rers are only allowed to bring products into the marketplace that conform to the Deco Paint directive and that do not exceed the stated maximum VOC contents VOC organic solvents These limits apply to the mixed product i e including the necessary hardener thinner and additives Since 2007 all materials conforming to Deco Paint must have the specific ma nufacturer information on the product label The label must contain information about the valid VOC limit values of each product category the actual maximum VOC content of the ready foruse product and the under lying product category in a horizontal and readable explanation The Deco Paint Directive applies in Germa ny and All Member States of the EU ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de ATV DIN 18356 Parquet Work ATV General Technical Terms and Conditions for Construc
4. LL D J furniture also for wall and ceiling panelling HH The stability and abrasion resistance depends degree of gloss upon the amount of material applied Non volatile 47 50 according to components degree of gloss Handling guidelines Density 0 9 0 93 kg l at 20 C Single to double coat application with Flashpoint 48 C 8 20 g m on properly prepared substrates Storage stability 1 year in the closed ZWS The carrier must be sanded thoroughly to original container the raw wood it must be dry and free from Storage temperature 15 25 C oil fat wax silicones and sanding dust Further information on storage Due to the high Formulation free of wood Ground treatment Final sanding of wood floor reactivity skin formation may occur please preservatives toxic heavy with grain size 150 dust removal Raw wood remove skin before stirring metals formaldehyde sanding for furniture surfaces grain size 240 Storage class according to the Occupation phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic 320 dust removal the quality of the sandingisa Safety Ordinance Flammable decisive factor for the quality of the final surface Please note actual Safety Data Sheet Mixture 10 1 with OR 87 or compounds Mixture 100 4 with OR 88 increases the Application method mechanical and chemical resistance of the Manual puttying Fulfils DIN EN surface Processing time of the mixture 1 hour at
5. O pa z u fae N lt an x E O
6. Oil with linseed oil base also with alkyde resin modified with natural oil with addition of leadand cobalt free siccatives semi mat diluted with iso paraffin viscoplastic hard wearing highly abrasion resistant RESIN Oll TOX RESPONS Does not contain any hazardous substances Fields of application in the entire field of interior completion and for coating of furniture for parquet and wooden floors as well as OSB panels and cork floors as well as also for staircases and handrails The stability and abrasion resistance depends upon the amount of material applied Handling guidelines Single to triple coat application with 30 60 g m on properly prepared substrates The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 according to wood ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Application example Planed timber floor boards oak semi gloss Wood sanding grain size 100 Base coat 1 x 10 30 g m Hesse NATURAL OIL OE 83 9 putty and pad in immediately afterwards Intermediate drying for at least 16 h 20 C Coating 1 2 x 40 60 g m Hesse RESIN OIL OE 82 4 with a suitable roller Intermediate drying for at least 16 h 20 C slight interim sanding grain size 120 150
7. Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Fulfils DIN EN 71 3 2002 11 safety of children s toys DIN 68861 part 1B DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simulation No discolouration Level 5 PVC resistant Status 06 05 11 Fields of application In the entire interior decoration also for brushing and rolling After dilution also applicable for MDF edge insulation Not suitable for applications within the scope of ChemVOCFarbV or under EC Guideline 2004 42 EEC Decopaint Handling guidelines Single to double coat application with 100 150 g m on suitable carriers max total moist application amount 300 g m Ground treatment Graduated raw wood sanding grain size 120 180 dust removal Intermediate san ding grain size 220 320 dust removal Mixture 5 1 with PUR Hardener DR 4070 for extreme wear and critical substrates Mixture 5 1 with PUR Hardener DR 4070 for coating of Weng addition of 30 thinner required Handling interval 1 Working day at 20 C Pot life 1 Working day at 20 C Drying Dependent on application amount material and ambient temperature application method and substrate material Forced drying possible up to 50 C Sandability after 4 5 h Recoatable Following sufficient drying and interim sanding wi
8. Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Appearance of the surface in the cross cut area where the flaking is example for each 6 parallel cuts Every splintering which cannot be classified as cross cut value 4 Images are examples of a cross cut within the parameter level The percentages are based on the visual impression conveyed by the images and the same percentages are not necessarily reproduced by digital image analysis Abrasion Taber Test Here the resistance of a surface to wear is checked The Taber Abraser is used for these somewhat different tests The test surface is clamped on a rotary plate Subsequently two friction wheels are mounted on the surface These friction wheels can be of different hardness consist of various materials and or with equipped with different abrasive materials different sandpaper discs leather rub ber grinding rolls etc When the Taber has been adjusted to the required parameters the rotary plate is set in motion Depending on the test method will either the quantitative removal after a certain number of revolutions or the number of revolutions are specified up to a certain degree of damage to the undercoat For special tests the conditions can be intensified by additional scattering of defined sand falling sand test In the results the test parameters and or the exact test method must be specified in o
9. Technical data Delivery Condition liquid Shade whitish Non volatile 27 28 components Density 1 00 kg l at 20 C Storage temperature 5 30 C Please note actual Safety Data Sheet Special advice After addition of 1096 additive into the last coat the principles in valuation group R 9 for slide blocking are fulfilled Incorporate material well Tested and confirmed in the Hesse PURA ONE HDE 51 X GG Ordering hints Order no HZ 75 Container sizes 1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Status 09 05 11 ADDITIVE 33 ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 34 UV APPLICATION UV Finally optimised for professional use on site ellifuigna Hess _ COATINGS Hesse GmbH amp Co KG
10. AQUA REFRESHER The last application should be made in vegetation grain direction Drying Accessibility after 2 h 20 C Full load capacity after 24 h 20 C Gloss level mat Technical data Delivery Condition liquid Shade whitish Supply viscosity 11 s DIN 4 mm 20 C Density 1 01 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 40 C Please note actual Safety Data Sheet Application method Apply the material evenly on the floor with a suitable swab dust mop or similar Special advice For varnishing of old and unattractive surfaces defers the new wear and tear In case of larger surfaces it is useful to separate into sections The desired gloss is formed automatically Do not wipe into already dried sections Danger of streaks building Avoid draught and dust raising in humid condition Existing coating components especially on older surfaces or on prefinished wood parquet can possibly cause bonding problems of the care product For this reason always make a test surface and asses if the result meets your requirements Please test adhesion in the entire construction In regular intervals it is required to remove old AQUA REFRESHER rests from the surface with Hesse Remover OS 5600 This way building of a sticky greasy surface caused by too frequent application of AQUA REFRESHER will be avoided Ordering hints Order no OE 5670 0001 Conta
11. Productivity per litre 8 10m Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Post treatment care PR9O PR 91 products Giscode W3 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Status 06 05 11 16 PURA ONE Hesse PURA ONE HDE 51 x degree of gloss MD Two component highly abrasion resistant viscoplastic well filling light fast with very good stability and resistance to foot tracks and typical household chemicals Multicoat lacquer for priming and top coating Emission tested building product accor ding to DIBT rules German Institute for constructional engineering ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Mixture ratio 10 1 by volume with Hesse PURA Hardener HDR 71 PURA ONE p TOX
12. with sanding lattice Accessible after 24 h 20 C Full load capacity after 10 d 20 C Technical data type and desired effect also grain size 180 Delivery Condition liquid according to annex XIV of EU regulation 1907 2006 Raw wood sanding for furniture surfaces 240 Shade brownish REACH Fulfils DIN EN dust removal Intermediate sanding grain size Supply viscosity 53 59s DIN 4 71 3 2002 11 safety of 120 240 dust removal mm 20 C children s toys The intermediate sanding is to be adjusted to Non volatile 52 96 the desired application amount the lesser the components application amount the finer the sanding up to Density kg l at 20 C 240 grain when padding The quality of the Flashpoint 43 C Product fulfills the speci fications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline BH H Emission tested building product according to DIBt principles connected with Hesse Synthetic resin finishes permit no zo 10112 General technical approval surface coating for parquets and wooden floors Status 23 09 13 wood sanding is a decisive factor for the quality of the final surface Mixture 100 4 with OR 88 Mixture 10 1 with OR 87 accelerates the through drying and increased the mechanical and chemical resistance of the surface Processing time of the mixture 1 hour at 20 C Material dries by oxidation please obser
13. 25 hardener Productivity per litre 25 33 m Thinner OV 89 Post treatment care PR 90 PR 91 products Giscode KH1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 32 PRIMER WHITE Hesse PRIMER WHITE OIL OB 84 77 mee ae Parquet oil based on linseed sunflower and jojoba oil also with alkyd resin modified with natural oil free of lead and colbalt siccatives viscoplastic pigmented abrasion resistant Emission tested building product according to DIBT rules German Insti tute for constructional engineering associated with Hesse Hydro lacquers elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Mixture ratio 10 1 with Hardener OR 87
14. 7 8 m Cleaning thinner DV 4994 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 1C PU FINISH 55 Hessel IL ignat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 56 PUR MULTICOAT LACQUER Hesse PUR Multicoat lacquer DE 4532 x degree of gloss 9 Two component PUR acrylic resin lacquer light fast well filling clear Multicoat lacquer for priming and top coating with high resistances expecially to mechanical strain Product can be used on bleached wood Free from phthalate softeners therefore also applicable for the coating of children s toys and baby accessories ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Mixture ratio 10 1 with PUR Hardener DR 4071 ui U TOX RESPONS
15. C at a relative humidity of 65 Recoatable without intermediate sanding after 100 120 min 20 C with Hesse HYDRO parquet lacquers especially with Hesse PURA NATURA Application example Planed timber floor boards oak Wood sanding grain size 100 Base coat 1 x 100 120 g m Hesse PRIMER with a suitable roller Intermediate drying 100 120 min 20 C Coating 2 x 100 120 g m Hesse PURA NATURA Intermediate drying for at least 2 3 h 20 C Intermediate sanding grain size 120 Intermediate sanding before the final lacquer coat with single disk sander and sanding grain size 120 150 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C Technical data Delivery Condition Liquid Shade colourless Supply viscosity 16 20s DIN4 mm 20 C Non volatile 33 34 components Density 1 023 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Application method Shake well before use Roll with a suitable roller Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity level for lacquering lies between 55 65 Water soluble wood ingredients such as th
16. Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 Special advice For lumbers with disturbing ingredients e g Jatoba we recommend to use a hydro primer base coating with OE 83 9 mix ratio 10 1 with hardener OR 87 see Technical Data Sheet OE 83 9 A test sealing is necessary General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity level for lacquering lies between 55 65 Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Ordering hints Order no HG 24 Container sizes 5 251 Productivity per litre 8 10 m Hesse DV 9 CLEANING AGENT for removing dried lacquer residues W3 6 7 Giscode pH value Hesse Primer ULTRA HG 24 Status 11 07 13 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our kn
17. HG 24 page 51 Hydro primer brilliant drying particularly 12 13 transparent ready to use fast drying for parquet and wooden floors with a tendency to side glueing and F blocking for the prevention of discoloration on wood Ta containing tannic acid such as oak UNA Elite HE 31 2 mat page 51 1C Hydro Acrylate lacquer for parquet and wooden HE 31 4 semi mat 14 15 floors with normal to medium stress HE 31 7 satin gloss PURA ONE HDE 51 2 mat page 4 5 2C Hydro Acrylate PUR lacquer for parquet and eee MV 10 1 HDR 71 HDE 51 4 semi gloss 16 17 u floors exposed to highest stress m HDE 51 7 satin gloss PURA NATURA HDE 52 0 page MV 10 1 HDR 72 2C Hydro Acrylate PUR Natural effect dull mat for bright parquet and wooden floors also with higher stress E 00 A O RESIN OIL OE 82 4 semi gloss page 2 5 Parquet oil for brushing and rolling for parquet MV optional OE 82 7 satin gloss 20 21 and wooden floors T 10 TOR Sy Durability and abrasion resistance depend on the amount of material applied NATURAL OIL OE 83 2 mat page 2 5 Parquet oil Natural look to pad in for parquet MV optional OE 83 9 glossy 22 23 and wooden floors as well as OSB boards and cork Ona OR 87 Durability and abrasion resistance depend on the number of oil layers NATURAL SOLID OIL GE 11254 page Oil based on linseed oil free from cobalt and lead MV optional 24 25 containing siccative low odour low solvent with good
18. RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP Fulfils DIN EN 71 3 2002 11 safety of children s toys Product fulfills the specifica tions of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline DIN 51130 anti slip proper ties 5 ZD 2792 R 11 Testing no 51091103 001 Status 06 05 11 Einsatzgebiete for parquet and wooden floors and OSB which are subject to the highest wear Handling guidelines Double coat application with 100 120 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 dust remo val Intermediate sanding grain size 120 dust removal The quality of the wood sanding is a decisive factor for the quality of the final surface Add the hardener to the original lacquer can and immediately shake for 1 2 minutes Do not mix in the application container Follow the exact mixing ratio also for partial quantities and shake the mixture well Use mixture only within the specified processing time Do not store ready mixed material in a close can Do not use any electric stirring devices danger of foam and or bubble formation Hand
19. Special advice Keep in a locked place out of reach of children Only bring completely empty containers to the recycling centre collection site General guidelines for handling Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints Order no PR 90 Container sizes 14 Ingredients 5 non ionic specifications tensides Contains according to regulation scents EC no 648 2004 2 methylisothiazol 3 2 H one 1 2 benzisothiazol 3 2 H one Carnauba wax Company code 3777 further ingredients Report according to WRMYOC Product number 2011861 Data Sheet for medical info hesse lignal de staff available under General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal f
20. TESTS Typical parquet tests elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Compound adhesion to base Hamberger wood plane These tests will determine whether the coa Application mainly used for ting structure has bonded well to the base In testing industrial parquet addition it can be assessed with coatings of i pres The company Hamberger Industriewerke has more layers whether the individual layers have o D based their test instrument on the principle of sufficiently bonded l the coin test This feature can be evaluated by various methods For the pragmatist the coin test has ees been tried and tested MY M Irt eee E Se T rarbin ng aries in LIMP MOT iu D ee ey G D lock and unieck the dest E adeant ue fie Ice B r Depi Of TA However the so called Hamberger plane can be tested under defined conditions As a result the force is given in Newtons N in which no white ning is visible Cross Cut according to DIN EN ISO 2409 Since this method is very subjective and has Another common method is the cross cut test In many non standard influencing factors expe this test the surface is cut into in a cross shape rience shows that it is only significant for com at an angle of 90 with a special multi cutter parative tests and only with sufficient practice blade A tape then is glued on to the cut area Here a
21. adhesion of subsequent care products Special advice Highly effective water based cleaning concentrate for removal of old coats of care products on varnished parquet and wooden floors Removes residues of Hesse Aqua Refresher Protect Cleaner and similar care products as well as stubborn dirt and foot In case of larger surfaces it is useful to separate into sections The suitability of the substrate for the use of Hesse Remover OS 5600 should be checked at one point first before full scale application This is also applicable for the cleaning effect against certain soilings Experience has shown that spots which already penetrated into the present coating or even already in the wood cannot be removed without residue by a subsequent cleaning and maintenance Ordering hints Order no OS 5600 Container sizes 1 25 Giscode GE20 pH value 10 Please dispose completely empty containers only Keep locked and out of the reach of children General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the
22. best to do the sealing either early in the morning or late in the evening The addition of RETARDERS can alleviate the influence of higher processing tem peratures but in some circumstances it can cause problems so the use should be carefully considered No coating should be carried out at room and object temperatures under 15 C and over 25 C The site should be draught free but well ventilated and with no direct sunlight The freshly coated surfaces must be allowed to dry evenly and adequately The parquet must be perfectly sanded and free of dirt oil wax and cleaning product residue A test coating should be done when using unknown or exotic types of wood A specially put aside test surface is ideal for this Intermediate sanding should always be carried out with a sufficiently abrasive product grid disc etc If it is too fine or worn out it can lead to adhesion problems If the drying period between the first and the second coats exceeds 24 48 hours depending on material an intermediate sanding must be carried out to prevent adhesion problems Please note the current safety Data Sheet as well as the technical information sheetbefore the use of each product Following the above advice is what distinguishes the professional user from the rest Simply put Attention to detail 70 TIPS Damage and prevention of sealed parquet surfaces 1 Imprints by furniture Cause Lacquer has not sufficientl
23. can be removed with Hesse CLEANING AGENT DV 49 Special advice On dark woods or stains greying may occur due to the slightly milky self colour of the material To minimise the risk of side glueing critical substrates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with HG 21 PURA NATURA 19 Hessel isnat COATINGS Hesse PURA NATURA HDE 52 0 Mischungsverh ltnis 10 1 Vol Teile mit Hesse PURA NATURA H rter HDR 72 QS gepr ft DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simula tion No discolouration Level 5 PVC resistant Status 09 05 11 General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity level for lacquering lies between 55 65 To avoid adhesion problems please freshly sand the lacquer surfaces before application and whenever possible immediately apply the top coat to the sanded surfaces Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Guidelines for cleaning and care Please note care instructions in accordan
24. care PR 90 PR 91 products Giscode KH1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 NATURAL OIL 23 Ak COATINGS ignal Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 24 NATURAL SOLID OIL m Proterra NATURAL SOLID OIL GE 11254 P es2an Oil based on linseed oil free of lead and colbalt siccatives with mild odour low solvent with good accentuation of the wood grains and excellent chemical and mechanical resistance properties NATURAL SOLID OIL Fields of application Technical data For parquet and furniture coatings For surface Delivery Condition Liquid treatment of wood used in the interior area Shade slightly yellowish such as living room bedroom and children s Supply viscosity 40 50s DINA furniture also for wall and ceiling panelling
25. coin with sharp edges is pressed firmly pressed and then quickly and evenly pulled off onto the surface to be tested drawn across the surface at a steady speed with the most possible uniform pressure A bad bonding shows significant damage to the surface coupled with a white scratch mark whitening The lower the visible damage the better the bond and the resiliency of the struc ture Typical parquet tests Cross cut value Description The cut edges are completely smooth none of the squares of the grid is chipped Small pieces of the coating have splintered off at the con nections of the grid lines Splintered area is essentially not greater than 5 of the cross cut area The coating has splintered along the cut edges and or the connections of the grid Splintered areas significantly greater than 5 but not significantly greater than 15 of the cross cut area The coating has partially or completely splintered along the cut edges in wide strips and or some squares have partially or completely splintered off A cross cut area is affected significantly larger than 15 but not significantly greater than 35 The coating has splintered along the cut edges in broad strips and or some squares have partially or completely spl intered off A cross cut area is affected significantly greater than 35 but not significantly greater than 65 TYPICAL PARQUET TESTS 63 ei Hess ignal COATINGS
26. for woods which are prone to bluing in wet rooms The material s properties were tested on standard timbers such as oak beech etc When using on other woods please test adhesion before use General guidelines for handling Of oxidativ drying materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat accumulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose these in closed containers Please make a test coating under practical working conditions NATURAL COLOUR OIL 31 Hesse NATURAL COLOUR OIL OB 83 colour tone 3 l Iesse Lignal Status 19 09 13 Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints Standard colours White OB 83 700 Ebony OB 83 901 Grey OB 83 703 Castle Brown OB 83 702 Light Walnut OB 83 803 Dark Walnut OB 83 804 Black OB 83 900 Olive Grey OB 83 740 Teak OB 83 133 Container sizes 1 251 Hardener OR 87 Container sizes 0 25 hardener Hardener OR 88 Container sizes 0
27. information provided in the TRGS 617 regulation This explains the possibilities for substitution regarding solvent containing products used for parquet and other wooden floors The valid national regulations currently in force must be observed 02 SOLVENT WOOD FILL Hesse Solvent WOOD FILL NS 15 elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de which results after mixing it with sanding dust in a high quality elastic and well filling gap filler SOLVENT WOQOD FILI TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds aromates free Status 06 05 11 Fields of application for parquet and wooden floors for filling parquet gaps up to 3 mm wide and filling smaller imper fections Not suitable for applications within the scope of ChemVOCFarbV or under EC Guideline 2004 42 EEC Decopaint Handling guidelines Single coat application with 50 80 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 dust removal Hesse Solvent WOOD FILL Shake well before use Mix with very fine sanding dust K80 to get a trowelabl
28. kg l at 20 C Flashpoint 21 C Storage stability 3 months in closed original can Storage temperature 16 25 C Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Spraying Working visc 20 24 s DIN 4 mm 20 C Air spraying cup gun Spray nozzle size 1 8 2 mm Spray pressure 2 5 3 5 bar Airless spraying Spray nozzle size 0 23 0 28 mm Spray pressure 100 120 bar Airless air assisted Spray nozzle size 0 23 0 28 mm Spray pressure 60 100 bar Atomizing pressure 1 2 bar Brush Roll with lint free rollers i e of shorthair mohair During the first use remove loose hairs with adhesive tape Rapid rolling prevents stop lines work in the direction of the wood grain Special advice Do not use product on light woods or those treated with wood foreign stains Do not use on bleached substrates General guidelines for handling Of PUR materials PUR lacquers should not be dried and processed at room temperature below 18 C and 40 relative air humidity Ideal values are 20 25 C 50 65 relative air humidity Variations lead to drying and curing problems Please make a test coating under practical working conditions Hesse 1C PU Finish DE 41 x degree of gloss Status 28 01 14 Ordering hints mat DE 41 2 semi mat DE 41 4 silky gloss DE 41 6 glossy DE 41 8 Container sizes 51 Productivity per litre
29. level for lacquering lies between 55 65 To avoid adhesion problems please freshly sand the lacquer surfaces before application and whenever possible immediately apply the top coat to the sanded surfaces Under certain circumstances timbers with a high wax content i e teak have a negative influence on the bonding Application of top coat on bleached woods only with 1C HYDRO lacquers and only following an interim drying interval of at least 72 hours after bleaching Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating UNA ELITE 19 Hesse UNA ELITE HE 31 x degree of gloss WM _ Hessel fLignal COATINGS _ Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints mat HE 31 2 semi mat HE 31 4 silky gloss HE 31 7 Container sizes 5l
30. loss of effectiveness Please note actual Safety Data Sheet Application method Manual puttying With stainless steel putty knife the contact with oxidating metals lead to disco louration of the material and the puttied surfaces Putty the complete parquet surface to be treated pre fill wide gaps or putty twice Remove dried lacquer residues with Cleaning Agent DV 9 Special advice To minimise the risk of side glueing critical sub strates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with Primer HG 21 Primer Plus HG 22 Primer Ultra HG 24 oder Spezial Grundierung ZD 4540 General guidelines for handling Of NC materials Please perform test lacquering under pracical conditions Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Ordering hints Order no NS 15 Container sizes 5x5 Productivity per litre 10 20m Thinner NS 15 Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Giscode G3 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in cha
31. mm 20 C Non volatile 97 3 97 5 96 Handling guidelines components Two to triple coat application with 6 20 g m Density 0 948 0 950 g cm a a on suitable carriers max total moist application at 20 C amount 30 40 g m Flashpoint gt 60 C Ground treatment On clean dry wood accor Storage stability 99 weeks in the closed ihd ding to wood type application process and original container MN EE rM desired effect grain size 240 320 dust removal Storage temperature 10 30 C Sand in with fine sanding fleece remove Further information on storage Due to the high Formulation free of wood surplus with a cotton cloth The surface should reactivity skin formation may occur please preservatives OU appear dry Otherwise final drying may be remove skin before stirring Ug led d disturbed Graduated raw wood sanding f PI te actual Safety Data Sheet phthalate based l g for ease note actual Safety Data Sheet plasticizers CMR materials parquet surfaces grain 120 150 remove dust Classes 1 2 volatile Apply material with a suitable putty knife after Application method halogen organic short exposure time incorporate the material Spraying compounds certificate regularly with a one disc machine and white Addition of thinner required ZR 12 08 02 04 non abrasive pad until the surface looks dry OV 1200 Mixture 100 4 with OR 88 accelerates the Sand in with sanding fleece and remove surplus through drying and increase the
32. of retarder Correction Sand and then reseal the layers where the protrusions are visible TIPS 71 A Hess ignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 12 Fractured joints Block fractures Cause Experience shows that fractured joints are always in direct connection to side bonding In turn this also depends on indoor climate wood moisture type of wood adhesive state of the base and the lacquer system Solution Ensure steady indoor climate 55 65 relative humidity Wood moisture of the parquet should be 8 12 Use special parquet primer to prevent block and side bonding Correction Sand complete floor down to raw wood as far as possible check substructure and bonding refill joints and reseal using suitable primer 72 TIPS Damage and prevention H NA i of oiled parquet surfaces esse iii LIgNa Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 1 Glossy sticky patches 2 Spotting Bad water or stain resistance Cause Oil worked in not without traces Cause Uneven sanding of the wood Cause insufficient oil application inap and the surface is dry leads to uneven absorption of the propriate cleaning and maintenance The oil and therefore to spotting A large number of layers of oil determine the Solution Work in oil without trace in amount of oil is poured directly from resistance of the oiled
33. only not wet Please only use cleaning agents which are neutral and do not contain any silicone ammoni um chloride and abrasives Regular cleaning and care with Hesse WHITE SOAP GR 1900 0700 will increase the lifespan of the parquet surface Ordering hints Order no GR 1900 0700 Container sizes 1 51 pH value 75 Ingredients Pigment White 6 specifications Carnauba wax anionic according to regulation surfactants unter 5 EC no 648 2004 perfume oil Benzisothiazolinone Methylisothiazolone Data Sheet for medical info hesse lignal de staff available under Giscode GE10 Hesse WHITE SOAP GR 1900 0700 Status 06 05 11 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 WHITE SOAP 45 Hessel IL ignat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 46 RE
34. place 1 Make sure in advance on a less conspicuous place that the remover does not damage the existing coating Cleaning and care instruc tions for sealed parquet surfaces according to DIN 18356 Cleaning and care instructions for oiled parquet surfaces according to DIN 18356 Cleaning and care instructions for industrial oiled parquet surfaces according to DIN 18356 As is well known cleaning and maintenance intervals are determined by the type and intensity of use low stress Depending on stress Depending on stress Refresh preferably after each thorough Private bedrooms and living Every 1 2 months Based on experience cleaning Repair when needed rooms 1x in year Medium stress Depending on stress Depending on stress Refresh after each basic cleaning and if Corridors stairs offices etc 1 2x a month 2 3 xa year necessary Repair when needed High stress Schools restaurants Depending on stress Depending on stress Refresh after each basic cleaning and if public areas lounges At least 1 x each week 3 4 x a year necessary Repair when needed SPECIALITY PRODUCTS Jj e ASED SPECIALITY PRODUCTS 51 For certain specialist applications the products in use are not always replace ble with solvent free alternatives Due to national and European regulations these products may not be used on site in Germany and the EU for parquet coating E In recognition of this please note the
35. product according to DIBT rules German Institute for constructional engineering associated with Hesse Hydro lacquers permit no Z 157 10 60 Emission tested building product according to DIBT rules German Institute for constructional enginee ring Status 06 05 11 Fields of application In the living area for parquet and wooden floors for normal to medium wear Handling guidelines Double coat application with 100 120 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 dust removal Intermediate sanding grain size 120 The quality of the wood sanding is a decisive factor for the quality of the final surface Drying Dependent on amount applied temperature of lacquer and surroundings humidity application process and substrate material Sandable and recoatable after 2 3 h 20 C Accessibility after 8 h 20 C Full load capacity after 10 d 20 C The parquet may not be covered with foils or carpets before having attained the final hardness Recoatable following thorough sanding possible with itself Application example parquet oak Wood sanding grain size 100 Coating 2 x 100 120 g m Hesse UNA ELITE with a suitable roller Intermediate drying for at least 2 3 h 20 C Intermediate sanding grain size 120
36. soaped parquet and wooden floors or furniture surfaces Extremely low odour and water dilutable WHITE SOAP GR 1900 0700 page 11 Solvent free biodegradable cleaning solution for 44 45 5 surface treatment cleaning and care for light parquet and wooden floors or furniture surfaces extremely low odour pigmented and water dilutable REMOVER OS 5600 page 11 Water based highly effective undiluted cleaning agent 46 25 toremove old recoats AQUA REFRESHER OE 5670 page 11 Environmentally friendly care product for heavily used M ern surfaces which are finished with Hesse parquet hydro sealer UV oil oil UV and oxy oil systems AQUA REFRESHER OE 5670 0001 page 11 Environmentally friendly care product for heavily used mat 48 25 surfaces which are finished with Hesse parquet hydro sealer UV oil oil UV and oxy oil systems SOLVENT WOOD FILL NS 15 page 5x51 Solvent based joint filler which after mixing with 52 sanding dust results in a high quality flexible and well filling joint filler Special Primer ZD 4540 page 5x51 Single component special primer free or aromatic 53 compounds particularly transparent brilliant when dry colourless with very good bond on delicate surfaces Primer for parquet and wooden floors SOLID PUR DE 41 4 semi mat page 51 1C PUR Lacquer which hardens by reaction to humi 54 55 dity to form an extremely durable protective film for renovation of parquet and wooden floors exposed to very high stre
37. such an object and one that enhances all areas of life Whether in the living room or nursery the kitchen or of fice public buildings or restaurants wood is all the rage It is as versatile as it is beautiful Whether traditional natural ecological contemporary or modern a wooden floor can be classic Oak and Beech to Walnut or exotic Mahogany Individuality is the key v hen choosing the ws type of wood and coating system required to bring your Ww dream floor to life 1 B B b om b NW P B 8 P Ue Hesse GmbH amp Co KG Since being founded in 1910 it has been our objective to be the ideal part ner to the woodcraft industry Over a hundred years of know how and experience is at our disposal As a result our forward thinking and innovative company has risen with an extensive range of lacquers and stains dedicated to the needs of carpen ters and joiners Thus Hesse offers one of the largest and highest quality product ranges in the industry Hesse products are manufactured according to the latest recipes and combine superior quality with easy and reliable processing In addition the desires and needs of our customers are very important to us None more so than environmental protection Water based lacquers our Proterra range and the continuous review of all popular lacquer systems show that we as a company are committed to the reduction of solvents We work hard to make sure our company displ
38. suitable for applications within the scope of ChemVOCFarbV or under EC Guideline 2004 42 EEC Decopaint Handling guidelines Two to triple coat application with 100 120 g m on suitable carriers max total moist application amount 300 g m Ground treatment Graduated raw wood sanding grain size 120 150 dust removal Intermediate sanding grain size 220 dust removal Seal any opened containers air tight immediately after removing material since the contents react to humidity and will condense Place the container upside down for a short time Immediately clean all implements Drying Dependent on application amount material and ambient temperature application method and substrate material Sandable and recoatable after 2 3 h 20 C Complete hardening after 7 d 20 C Recoatable following drying and initial sanding only with material from the same series Application example In each case the application method and the exact application parameters are adjusted to the application and drying conditions They can be learned from the customer s specific process descriptions Gloss level 08 12 Gloss 125 um mat 18 22 Gloss 125 um semi mat 28 32 Gloss 125 um silky gloss 62 68 Gloss 125 um gloss DIN 67530 60 application on photo cardboard Technical data Delivery Condition Liquid Shade colourless Supply viscosity 22 24 s DIN4 mm 20 C Non volatile 38 41 components Density 0 98 1 0
39. surface Resistance the given time and if need be to be on the container on to the wood and then also depends on the actual type of wood the safe side wipe dry with a lint free spread and its pore marks cloth Solution Graduated smooth wood Solution Wood floors must be oiled so Correction Sand whole floor and re oil sanding without transitions is abso long as the wood cannot absorb any In particularly sticky surfaces scrape lutely necessary with oil Never omit more oil Remove surplus oil with a lint first as far as possible and then sand a sanding process to save time Only free cloth and then after drying maintain the rest pour from an appropriate container as regularly with Protect Cleaner Depen much oil on to the wood that can be ding on stress clean with intensive cleaner spread evenly in one stroke first To avoid usage marks it is necessary to re oil in time and regularly Correction Sand whole floor down to raw wood prepare gradually with 120 Correction Sand whole floor down to grain and re oil raw wood prepare gradually with 120 grain and re oil Colour changes in oiled surfaces Cause Both real wood as well as natural oils change under influence of light and heat Too much light as well as light deprivation dark yellowing may lead to colour changes This distinguishes this group of natural materials Normally this process is slow and even so the changes are not at first noticed On the contrary in most c
40. top coat only Hint for application as MDF edges isolation under coloured lacquer systems Process mixture with 20 30 of thinner DV 4900 always the same day after prior sanding with grain 320 Applicable for finishing PUR Colour lacquers results in ring resistance PUR MULTICOAT LACQUER 57 Hesse PUR Multicoat lacquer DE 4532 x degree of gloss iA e Mixture ratio 10 1 with PUR Hardener DR 4071 less ignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de General guidelines for handling Of PUR materials PUR lacquers should not be dried and processed at room temperature below 18 C and 40 relative air humidity Ideal values are 20 25 C 50 65 relative air humidity Varia tions lead to drying and curing problems To avoid faulty bonding please pre sand PUR lacquer surfaces immediately before applying lacquer and apply the top coat to the sanded sur faces as soon as possible Only use residues from the previous day as a 10 20 addition to a fresh lacquer hardener mixture Old lacquer har dener mixtures interfere with the surface quality adhesion resistance The final hardness of the finish is attained with proper storage at least 20 C room temperature after one week Freshly bleached wood must dry at least for 48 hours at 20 C before coating with PUR lacquers Please make a test coating under practical working conditions Ordering h
41. visible stress that you protect the floor as it will only enhance its appearance and lengthen its life PRIMER 5 Toensure uniform colouring of the floor a reconditioning repair process can be used to prevent damage to the coloured layer Therefore we recommend regular inspection by a registered body Looming traces of wear and damaged can be detected and remedied before they worsen 6 Please note the product specific technical information and maintenance instructions in accordance with DIN 18356 sessel ln PRIMER PLUS 68 GUIDE FOR COLOURING Guide for colouring old parquet and Wf wood flooring with Hesse parquet stain Hessellll Ligna Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de PURA ONE 1 Sand the parquet down to the raw wood P120 rud d 2 exam 2 Measure the moisture of the timber should not be under 8 If necessary dampen the wood by with a flower spray before allowing it to dry and repeating the sanding process 3 Check the humidity it should be no lower than 30 but ideally 55 60 If necessary use humidifier PURA NATUR nto ipach J emp 4 We recommend a pre coating using the colourless parquet stain CLEAR WPB 1000 on fragile wood to prevent uneven or blotchy stain results Apply WPB 1000 roll spray and work it in to the surface until completely dry single disc machine with a white pad 5 Drying time overnight with at least 16 hours 20 C wit
42. volatile 17 5 18 96 components Density 1 014 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Application method Manual puttying With stainless steel putty knife the contact with oxidating metals lead to discolouration of the material and the puttied surfaces Putty the complete parquet surface to be treated pre fill wide gaps or putty twice Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 Too doughy sanding powder paste can be diluted with Hesse WOOD FILL if required Do not use water Special advice Do not transfer material to metal containers To minimise the risk of side glueing critical substrates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with HG 21 HG 22 General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity level for application lies between 55 65 A too low level of humidity during the lacquering process leads to shrink cracks a too high level delays the drying process Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a ru
43. volatile 9 11 ditions of business The Safety Data Sheet will components be provided in accordance with EC Ordinance Density 0 84 kg l at 20 C 1907 2006 Flashpoint fal Storage stability 1 year in the closed original container Storage temperature 16 25 C Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Brush Roll Special advice Please test adhesion in the entire construction Status 12 03 13 54 1C PU FINISH y ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de One component PU Finish which by reaction with humidity hardens to a highly resistant shield especially well filling highly abrasion resistant and hard wearing Multicoat lacquer for priming and top coating with very good resistance to chemical and mechanical strain uH TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Fulfils DIN EN 71 3 2002 11 safety of children s toys DIN 68861 part 1B DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simulation No discolouration Level 5 PVC resistant Status 28 01 14 Fields of application In the entire interior decoration Not
44. 0 Post treatment care PR 90 products Regular cleaning and care with PR 90 with Carnauba wax and PR 91 increases the useful life of the sealant General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and condi tions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Status 27 01 14 RAKQUET COLOURING Ure noro ra E EE ne ees aa ou ele Bete ee ew ENS etek eke wp i Tire Fige uw ww m E I maru xau mam d Ar m eM Parquet Colouring ca d i P d T T a y E i The desire for cofoured parquet flooring i iS at pad now as it Fras E LM in itry TA 7 gt zd Current frends suggest dark and exotic wo ds with rich natural colours are leading the way d rio ze This wish can be fulfilled with an assortment of coordinated parquet stains kc n Instead of buying expensive and rare exotic wood our high quality parquet stains can create b
45. 100 4 OR 88 grain enhancement of the wood and excellent chemical resistance Special stain in many attractive colours for staining parquet with subsequent sealing PARQUET COLOUR it Parquet stain high light resistance NATURAL COLOUR OIL OB 83 Tinted parquet oil in many attractive colours MV optional 30 31 to pad in for parquet and wooden floors as well as TOFST OR 87 OSB boards and cork Durability and abrasion resistance depend on the number of oil layers PRIMER WHITE OIL OB 84 77 e 2 5 Tinted parquet oil for priming under MV 10 1 OR 87 2C Hydro sealing e g PURA NATURA Additive slide blocking HZ 75 Additive to increase slip resistance according to BGR 181 DIN 51130 NJ CO V da No O N Ui NN U oy SS WO O UJ o go Qa Qa D D CONTENT 7 911 171 ubi HERKULITE HUE 86063 mat page 5l Water dilutable UV hardener parquet sealing lacquer HUE 86064 semi mat 36 37 25 for technical processes on site solvent free colourless HUE 86068 brilliant ready to use extremely scratch and abrasion resistant PROTECT OIL OE 88 2 page 1 Parquet oil for maintenance and repair of oiled floors MV optional 38 39 10 1 OR 87 PROTECT CLEANER PR 90 Cleaning and maintenance product for parquet 40 INTENSIVE CLEANER muc vo 91 Intensive cleaner for parquet muc b 1M BROWN SOAP GR 1902 page 11 Solvent free biodegradable soap solution for 42 43 5 surface treatment cleaning and care of dark
46. 11 vessel Fields of application As cleaning and care agent for white or light parquet and wood floors and furniture surfaces If applied directly on raw wood you will produce a light wood depending soap effect not suitable for mirrors marble or non slip surfaces Handling guidelines single and multicoat application with on suitable carriers Ground treatment Sweep or hoover loose dust and dirt Remove other soi lings completely Due to the high humidity load the soap technology is not recommendable on moisture sensitive carriers e g beech wood paving etc Also cleaning and care must be made slightly damp only As cleaning and care agent for light soaped or oiled surfaces Mix Hesse WHITE SOAP at the ratio of 2 100 100 ml into 5 L water with water apply this cleaning solution evenly but not too wet with a swab and remove in the process the dirt from the surface Subsequently rinse the swab with clear water wipe the surface again with cleaning solution slightly damp and allow it to dry Do not re wipe with clear water Drying Recoatable Soap treated surfaces will always be cared and cleaned with special soap cleaners only In exceptional cases the surface may be carefully and slightly polished with a one disk machine and white pad Application example parquet fir Scandinavian effect Pre treatment of the carrier Clean professionally laid and correctly pre treated parquet wooden floor with graduate
47. 20 C at a relative humidity of 65 Recoatable without intermediate sanding after 100 120 min 20 C with Hesse HYDRO parquet lacquers preferred under Hesse HERKULITE HUE 8606x degree of gloss Application example Planed timber floor boards oak semi mat Wood sanding graduated with grain size 80 120 Base coat 1 x 80 100 g m Primer ULTRA HG 24 with a suitable roller Intermediate drying 100 120 min 20 C Coating 2 x 100 120 g m Hesse HERKULITE HUE 86064 see special Technical Data Sheet for Hesse HERKULITE HUE 8606x gloss degree Intermediate drying appr 2 h 20 C UV curing with suitable mobile UV lamp unit e g Floormate by company DecoRad or comparable 1 Hg lamp 80W cm forward feed ca 7 m min Please follow the processing and handling instructions and wear the personal protective equipment slight interim sanding grain size 120 Accessible immediately after proper UV curing Full load capacity Now the surface is ready and after short cooling time it can be burdened immediately Technical data Delivery Condition Liquid Shade colourless Supply viscosity 16 20s DIN4 mm 20 C Non volatile 21 components Density 1 0 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Application method Shake well before use Roll with a suitable roller Clean tools with water
48. Acetone 23 Detergent 24 Cleaning solution 16 hrs CAN EN pe KE EZA omin um D Effective duration A Requirement as classi fication code according to DIN EN 12720 2009 07 Source Beuth Verlag DIN 68861 1 2011 01 Evaluation Scheme 5 no visible changes 4 even discernible changes in gloss or colour 3 slight change in gloss or colour the structure of the test surface is unchanged 2 severe marking visible the structure of the test surface is still generally unchanged 1 severe marking visible the structure of the test surface is changed O test surface severely changed or destroyed The chemical resistance of oiled parquet surfaces is only partially comparable with sealed surfaces due to the significantly lower layer strengths The stable properties are indeed mainly determined by the quality of the oil used however the working procedure the type of wood used and the raw wood sanding also play a major roll in the suitability for daily use of an oiled surface 66 GIS CODES GIS Codes m nr PRIMER WHITE OIL E rr LR MEL Emt zl RESIN OIL W1 W2 W2 W3 w3 W1 DD W2 DD W3 DD W3 DD G1 G2 KH1 O10 O10 O10 DD O20 040 O40 O50 O60 PU50 GE10 GE20 elllfuigna COATINGS Water dilutable surface treatment agent solvent free Water dilutable surface treatment agent solvent content up to 5 N methylpyrrolidone free Water dilutable surface tre
49. Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline General technical approval surface coating for parquets and wooden floors permit no Z 157 107112 Emission tested building product according to DIBT rules German Institute for constructional engineering Status 19 09 13 For parquet and furniture coatings for surface treatment of wood used in the interior area such as living room bedroom and children s furniture also for wall and ceiling panelling Handling guidelines Single to double coat application with 8 20 g m on properly prepared substrates The carrier must be sanded thoroughly to the raw wood it must be dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 150 180 Raw wood sanding for furniture surfaces grain size 240 320 dust removal The quality of the sanding is a decisive factor for the quality of the final surface Mixture 10 1 with OR 87 or Mixture 100 4 with OR 88 increases the mechanical and chemical resistance of the surface Processing time of the mixture 1 hour at 20 C Adding hardener accelerates the complete drying Material dries by oxidation please observe the general guidelines for processing Drying Good ventilation necessary Application of the next coat after 16 h 20 C Accessibility after 24 h 20 C Full load capacity after 10 d The parque
50. Institute for constructional engineering associated with Hesse Hydro lacquers o PRIMER PLUS p TOX RESPONS Formulation free of wood preservatives toxic heavy me tals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP ChemVOC FarbV Decopaint fahig Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline General technical approval surface coating for parquets and wooden floors permit no Z 157 10 60 7157 10 51 Emission tested building product according to DIBT rules German Institute for constructional engineering associated with Hesse Hydro lacquers Status 06 05 11 Fields of application under Hesse parquet lacquers to minimise the risk of side glueing of wooden pavings upright blades planed floor boards and parquet on underfloor heatings Handling guidelines Non recurring application with 100 120 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 dust removal Fill gaps properly with Hesse WOOD Fill see respective Technical Data Sheet Drying Good ventilation necessary Initial drying 15 min 20 C at a relative humi
51. Intermediate sanding before the final lacquer coat with single disk sander and sanding grain size 120 150 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C Gloss level 08 12 Gloss 125 um mat 17 23 Gloss 125 um semi mat 37 43 Gloss 125 um silky gloss DIN 67530 60 application on photo cardboard Technical data Delivery Condition Liquid Shade colourless Supply viscosity 18 22s DIN4 mm 20 C Non volatile 38 5 40 according components to degree of gloss Density 1 035 1 042 kg l at 20 C 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Storage stability Application method Shake well before use Spraying possible Roll Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 Special advice To minimise the risk of side glueing critical substrates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with HG 22 Parquet floors which have already been lacquered with solvent containing systems should only be touched up with systems which contain solvents to prevent the risk of spot formation General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity
52. Intermediate sanding roll sanding machine grain size 100 120 single disk sander grain size 120 150 No gap putty residues must remain on the surface danger of spot formation Drying With good ventilation and max humidity of 60 Sandability after 30 60 min 20 C for 1mm gaps for 2mm gaps drying over night Subsequent treatment with all products from the Hesse parquet range PUR Hydro lacquers and oils Application example Mosaic style parquet oak with flaws Wood sanding grain size 100 Mixing Hesse WOOD FILL with clean oak sanding dust grain 100 Puttying 1 x on the entire surface Hesse WOOD FILL Mixture with clean oak sanding dust grain 100 Intermediate drying 30 60 min 20 C Plane sanding grain size 100 150 except for the raw wood Coating 2 3 x 100 120 g m Hesse UNA ELITE with a suitable roller Intermediate drying each for at least 2 3 h 20 C better over night Intermediate sanding each grain size 100 120 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Gap filling solution based on dispersion which results after mixing it with sanding dust in a high quality elastic and well filling gapfiller Technical data Delivery Condition Liquid Shade whitish Supply viscosity 30 40 s DIN4 mm 20 C Non
53. MOVER Hesse REMOVER OS 5600 elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de is a highly effective water based cleaning concentrate for removal of old coats of care products on varnished parquet and wooden floors REMOVER AL TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Status 19 11 13 Fields of application Removes residues of Hesse Aqua Refresher Protect Cleaner and similar care products as well as stubborn dirt and footprints Handling guidelines Single coat application Ground treatment Remove loose dirt by vacuum cleaner or fine broom Hesse Remover OS 5600 must be diluted with water according to the degree of pollution and the surface to be cleaned is wiped evenly moist with a swab dust mop or similar Base cleaning approx 1 liter Hesse Remover OS 5600 into 5 liters of mopping water Wipe the floor evenly moist with this cleaning solution and let it react for about 5 minutes Application quantity and reaction time mustn t be too high so that the wood does not swell Subsequently wipe the surface with clear water in order to remove deta ched coats and possible rests of remover Please make sure that the surface is not wiped too wet After full drying of the residue
54. Warendorfer Str 21 D 59075 Hamm www hesse lignal de Split second hardening with high energy The special floor parquet coatings are ap UV Light This benefits the processor by plied as usual evenly on the surface After offering excellent resistance and a signi a relatively short drying period the dried ficantly earlier ability to withstand heavy surfaces are hardened with special UV lamp traffic Shorter processing times mean units customers have access to the site almost immediately therefore reducing any UV Curing how does it function potential loss of earnings Photoinitiators contained within the lacquer film are animated by the high energy UV UV Hardening what s new light In this state they cause extremely fast The first historical use dates back to the chemical cross linking polymerization with ancient Egyptians who used linen cloths the binder components to form a densely soaked in bitumen to mummify the dead interlinked and extremely durable lacquer Sunlight hardened the bitumen and thus film After a stabilization period of a few permanently preserved the body minutes the surface is for the most part completely cured and ready for use Since the 1960s UV curable lacquers have been used for the industrial coating of wood paper etc Both for protective and decorative purposes The UV induced hardening process results in a highly cross linked surface characterised by class leading chemical and mechanical resistance ab
55. a test surface and asses if the result meets your requirements Please test adhesion in the entire construction In regular intervals it is required to remove old AQUA REFRESHER rests from the surface with Hesse Remover OS 5600 This way building of a sticky greasy surface caused by too frequent ap plication of AQUA REFRESHER will be avoided Ordering hints Order no OE 5670 Container sizes 1 251 Giscode W2 Keep locked and out of the reach of children Please dispose completely empty containers only General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 48 AQUA REFRESHER Hesse AQUA REFRESHER MAT OE 5670 0001 eli Fess ignal COATINGS _ Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de is an environment sparing care agent for highly loaded surfaces which
56. acquering with aqueous systems Wood is a natural raw material subject to aging processes Bright and slightly bleeding stain shades change due to yellowing and aging more intensely then darker and intense shade adjusted stains Please take into account these influences already when selecting the wood type the stain shade and the sealant materials The coating of wooden floors wears down in the course of time depending on the degree of use Careful upkeep and or prompt re sealing of the colourless coating prevent a costly complete restoration This becomes absolutely necessary when the stain coat is already damaged Please perform a test of staining and finish on original to inform yourself and your customers of the result of your work Ordering hints Standard colours Cherry WPB 1001 Cottage Pine WPB 1002 Mahogany WPB 1004 Cognac WPB 1005 Teak WPB 1006 Smoked Oak WPB 1007 Walnut WPB 1008 Chocolate Brown WPB 1106 Object shades Antracite WPB 1034 Pebble Grey WPB 1036 Beige WPB 1037 Sugar Brown WPB 1105 Vintage Oak WPB 1160 Smart Grey WPB 1144 Castle Brown WPB 1149 Olive Grey WPB 1154 Container sizes 5 Productivity per litre 10 20m Thinner WPB 1000 Giscode W3 Cleaning thinner H2O PARQUET COLOUR 29 Hessel lL isnat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de General advice exclusion Our technical information is constantly updated according to the state of th
57. adjustment of spray viscosity with up to 5 of water Roll Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 Special advice To minimise the risk of side glueing critical substrates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with HG 22 Parquet floors which have already been lacquered with solvent containing systems should only be touched up with systems which contain solvents to prevent the risk of spot formation Hesse PURA ONE HDE 51 x degree of gloss Mixture ratio 10 1 by volume with Hesse PURA Hardener HDR 71 Emission tested building product according to DIBT rules German Institute for constructional engineering permit no 7z157 10261 General technical approval surface coating for parquets and wooden floors DIN 68861 part 1B DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simulation No discolouration Level 5 PVC resistant Status 06 05 11 General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity level for lacquering lies between 55 65 To avoid adhesion problems please freshly sand the lacquer surfaces before application and whenever possible immediately apply the top coat to the sanded surfaces Unde
58. amm www hesse lignal de 3 Dissolving of the lacquered surface Cause Improper cleaning and or main tenance product or the plasticizer e g carpet backing anti slip under lays etc moves under the lacquer layer Solution Use cleaning agents from the manufacturer of the coating material Switch to plasticizer free under lays with carpets with PVC backing carry out 2C lacquering Correction sand and reseal the complete floor Blistering Cause Draught at high temperatures mostly in summer Direct sunlight in front of large windows Unsuitable sealer roller With 2C products hardener not sprinkled in but mixed at too high a speed in a mixer Solution Do not coat parquet at tempe ratures above 25 C lacquer only early in the morning or evenings Avoid direct sunlight Close blinds turn off under floor heating in time Delay lacquering slightly Stir in hardener only by intensive shaking in container Correction Sand surface with 120 grain until the blisters have gone and reseal Streaks in the wood Cause Sanding error in wood especially in the transition area between edges and surface can lead to discoloration Swit ching between different sanding medium within the surface Solution Wood sanding must be carried out very carefully Gradual sanding up to 120 grain with lacquer Even out transiti on areas between surface and edge with a single disc sanding machine Correction Sand the whole
59. and dry HYDRO lacquers at RT below 18 C The ideal humidity level for lacquering lies between 55 65 Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Ordering hints Order no HG 22 Container sizes 5 Productivity per litre 8 10m Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Giscode W3 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 12 PRIMER ULTRA Hesse Primer ULTRA HG 24 kr E One component HYDRO Base coat brilliant glossy drying especially transparent ready for use fast drying for parquet and wooden floors with tendency to side g
60. and pad in immediately afterwards surface coating for Intermediate sanding for at least 16 h 20 C rudi dd Accessible after 24 h 20 C 7 457 10 112 Full load capacity after 10 d 20 C Emission tested building product according to DIBT rules German Institute for constructional engineering Status 23 09 13 Hesse NATURAL OIL OE 83 x degree of gloss Status 23 09 13 General guidelines for handling Of oxidativ drying materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat accumulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose these in closed containers Please make a test coating under practical working conditions Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints mat OE 83 2 glossy OE 83 9 Container sizes 1 2 5 Hardener OR 87 Container sizes 0 25 hardener Hardener OR 88 Container sizes 0 25 hardener Productivity per litre 25 33 m Thinner OV 89 Post treatment
61. ases these changes are wanted and happily accepted But with some exotic woods or coloured oil applications this characteristic is in some circumstances relatively early and clearly noticeable e g through strong incidences of light by terrace doors floor to ceiling windows white oils etc Solution Because this effect is a sign of naturalness there is really no solution Rejection of natural products might provide some help However this often means turning away from a good philosophy and should be well thought out But also using materials with a much higher light fastness can delay the process of colour change but not completely prevent it In individual cases it is possible to fall back on an indigenous wood which is not so greatly influenced by light It is subsequently and appropriately coated with a special parquet stain designed to be close to the colour tone of the exotic wood But once again the colour change can only be weakened and delayed So the customer must be made aware of this special characteristic of the oiled parquet when com missioning so that there will be no nasty surprises Correction If necessary sand the whole floor to the raw wood and re oil Caution Do not retreat white or light oil surfaces with colourless oils Cherry WPB 1001 Cottage Pine WPB 1002 Mahogany WPB 1004 Cognac WPB 1005 Teak WPB 1006 Smoked Oak WPB 1007 Walnut WPB 1008 Chocolat Brown WPB 1106 Anthracite WPB 1034 Parquet Colour Pe
62. ass according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Manual puttying putty or roll thinly immediately thereafter pad grind in Larger surfaces should be treated by two people Manual application also partially possible Disperse Hesse PROTECT OIL with white cotton cloth or wite grinding fleece thinly and evenly on the surface and remove excess with cotton cloth Special advice Material is not suitable for woods which are prone to bluing in wet rooms Hesse PROTECT OIL OE 88 2 Status 25 11 13 General guidelines for handling Of oxidativ drying materials Coating materials which develop heat when drying oxidatively drying oils and coating materials which form easily flammable sedimentations must not be applied at the same spray booth because there is a risk of self ignition see BGR 500 Chapter 3 Processing of different types of coating materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat accumulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose of these in closed containers as a precaution whenever possible do not sand in the spray booth Please make a test coating under practical working conditions Guidelines for cleaning and care Please note care instr
63. atment agent solvent content up to 5 Water dilutable surface treatment agent solvent content up to 15 Water dilutable surface treatment agent solvent content up to 15 solvent free Water dilutable surface treatment agent with isocyanate hardener water based wood floor finish with isocyanate hardener solvent content up to 5 6 N methylpyrrolidone free based wood floor finish with isocyanate hardener solvent content up to 15 N methylpyrrolidone free Water dilutable surface treatment agent with isocyanate hardener solvent content up to 15 High solvent borne base sealer wood putty disaromatised and and low ebullition free high solvent borne base sealer and wood putty aromatic compounds and low ebullition high solvent borne oil resin sealer disaromatised solvent free oil wax butanone oxime free oils waxes solvent free solvent free oils with isocyanate hardener butanone oxime free solvent free oils waxes disaromatised butanone oxime free solvent borne oils waxes disaromatised butanone oxime free oils waxes solvent borne disaromatised oils waxes solvent borne aromatic oils waxes high solvent borne disaromatised PU System solvent borne harmful to health sensitising emulsions dispersions emulsions dispersions solvent borne 5 15 GUIDES FOR STAINED PARQUET AND WOODEN FLOORING 67 Guides for stained parquet Sili and wooden flooring Hesse i Lignal COATINGS Hesse GmbH amp Co KG Waren
64. aviour and the residual emissions at different drying times is also tested Unfortunately this whole admission process is very time consuming and rarely predic table for the client It is not uncommon to wait up to and over a year between the application and the presentation of the final certification Therefore we can not give a specific appro val number for certain products yet STANDARDS CERTIFICATES 61 elif ess ignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Technical Regulations for Hazardous Substances TRGS 617 Substitutions for strong solvent based treatment agents for parquet and other wood flooring The Technical Regulations for Hazardous Substances TRGS reflect the current level of understanding in occupational medici ne hygiene and other ergonomic findings regarding the use of hazardous substances including their classification and labelling These regulations explain the benefits of substituting solvent based surface treatment products for the more health and safety conscience alternatives for use with parquet and other wood flooring The objective of the substitution is to eliminate or to reduce the risk involved in working with hazardous substances This is vital measure to protect people working with hazardous substances Please see TRGS 617 if for technical reasons strong solvent based products are used 62 TYPICAL PARQUET
65. ays the lowest possible ecological impact and therefore a significant contribution to environmental protection You also benefit from the latest de velopments in the furniture industry which are quickly t transfered to the craft market _ j mi dj bH i UIN prod uct tensive consul ormation service in collection chart In addition to our bal range we offer an e tancy and current i Whether it is our st or Hesse Lacktuell ex hange of information is important so that you together with ourselves are always up to date on key technical issues Talk to us WT highly red production facilities coupled with intelligent pro cess control are the defining principles of our prod uction We guarantee that our products maintain the maximum level of consistency through constant scrutiny at every stage of manufac turing We focus on the needs and desires of our customers and to this end we operate one of the largest re search and development laboratories in Europe Born out of this a compre hensive and complete program has emerged for each area of the wood finishing industry Whether staining lacquering restoring or maintaining each area is covered by a comprehen sive range of products that show the extraordinary possibilities and creative solutions that are possible with Hesse products This guarantees that you will always get top quality products at a reasonable price at Hesse 4 Service es s
66. bble Grey WPB 1036 Sugar Brown WPB 1105 Beige WPB 1037 Vintage Oak WPB 1160 Smart Grey WPB 1144 Castle Brown WPB 1149 Olive Grey WPB 1154 Teak OB 83 133 Dark Walnut OB 83 804 White OB 83 700 Black OB 83 900 Castle Brown OB 83 702 Ebony OB 83 901 Natural Colour Oil Grey OB 83 703 Primer White Oil OB 84 77 Olive Grey OB 83 740 Primer White Oil OB 84 77 WPB 1037 Light Walnut OB 83 803 Editor Hesse GmbH amp Co KG Special remarks Our product advices and processing proposals shall support the professional user and shall be help for him In isolated cases the use of our products requires the careful examination of all conditions Our technical advisers are pleased to assist you with our experiences For print technical reasons the shown samples and photos may differ from the original colour tone Our products are manufactured according to the latest findings in research and practice new findings will lead to technical changes which may differ from this presentation The technical information shown in this parquet catalogue is the current information at the time of print Any corrections and therefore the latest edition can be found in internet under www hesse lignal com Status March 2014 elif COATINGS ignal Hesse GmbH amp Co KG Warendorfer Str 21 59075 Hamm Germany Tel 49 2381 96300 Fax 49 2381 963849 E mail info hesse lignal de www hesse lignal de St NS O N
67. ce to be treated must be clean and dry Sand the parquet thoroughly and evenly also in the corners old parquet surfaces must be completely sanded down to the raw wood grain size 120 dust removal The wood humidity should correspond to the well known guidelines within the scope of floors Stir and shake material well before use Drying Good ventilation necessary The ideal room temperature is 16 22 C the relative air humidity 40 65 96 Recoatable after 16 h 20 C only with products of the Hesse parquet range PUR Hydro lacquers and oils There s no guarantee if other materials are used Technical data Delivery Condition low viscosity Shade in many attractive colours colour shade varies according to type of wood Density 1 0 1 2 kg l at 20 C 26 weeks in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Storage stability Application method Spraying possible with vapourizer Brush Roll with lint free rollers i e of shorthair mohair During the first use remove loose hairs with adhesive tape Immediately thereafter egalize the surplus with a single disc sanding machine with non abrasive white pad to avoid traces and uneven spots Larger surfaces should be treated by two people After the levelling the stain may no longer lay moist on the surface Rotation tracks from the single disc machine indicate stain excesses which must be further level
68. ce with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral deter gents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints dull mat HDE 52 0 Container sizes 4 5 Hardener HDR 72 Container sizes 0 45 hardener Productivity per litre 8 10m Thinner H2O max 5 only for spray application Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Post treatment care PR 90 PR 91 products Giscode W3 DD Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 20 RESIN OIL Hesse RESIN OIL OE 82 x degree of gloss re7m
69. cific process On hard timbers dilute with descriptions 20 OV 1200 DIN 51130 anti slip For lacquering the interior of cabinets we i Gloss level recommend due to its low self odour Proterra properties R10 semi gloss Resit GE 17102 Testing no After sufficient drying recoatable with e g 201322005 3210 GZ 1020 0001 GZ 1021 GZ 1023 Status 27 01 14 NATURAL SOLID OIL 25 Proterra NATURAL SOLID OIL GE 11254 General guidelines for handling Of oxidativ drying materials Coating materials which develop heat when drying oxidatively drying oils and coating materials which form easily flammable sedimentations must not be applied at the same spray booth because there is a risk of self ignition see BGR 500 Chapter 3 Processing of different types of coating materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat accumulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose of these in closed containers as a precaution whenever possible do not sand in the spray booth Please make a test coating under practical working conditions Ordering hints Order no GE 11254 Container sizes 1 2 5 25 Hardener OR 88 Container sizes 0 25 hardener Productivity per litre 30 60m Giscode 20 Thinner OV 1200 Surface cleaning GR 190
70. code 3777 2011867 info hesse lignal de General advice exclusion Delivery Condition liquid Our technical information is constantly updated Shade whitish according to the state of the art and the applica Supply viscosity 11s DIN4 mm 20 C _ ble legal requirements You can find the respec Non volatile 4 8 96 tively current version on the Internet or contact components the customer service representative in your area Density 0 992 kg l at 20 C The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Storage stability 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Application method Wipe misty moist Special advice Before use inspect the surface for resistance to Hesse INTENSIVE CLEANER Keep in a locked place out of reach of children Only bring completely empty containers to the recycling centre collection site General guidelines for handling Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral d
71. cs WPB 8 8 8 PRIMER HG 21 xN i J T OE 83 GG NATURAL SOLID OIL GE 11254 HERKULITE HUE 8606x GC OB 83 FT 7 7 7 PRIMER PLUS HG 22 5 PRIMER ULTRA 4 HG 24 5 PRIMER WHITE OIL 1 3 OB 84 77 RESIN OIL OE 82 GG 1 3 10 NATURAL a a m T 5 zi 9 F A e UJ BH Comments recommended _ only partly recommended Harden oil MV 10 1 with OR 87 Drying overnight at room temperature before applying next layer Harden oil MV 100 4 25 1 with OR 88 Drying overnight at room temperature before applying next layer If intermediate drying longer than 16 hours slight sanding required Good sanding required Recommended to a limited extent because the natural wood effect is weakened The subsequent surface treatment influences the final colour Stains must be sufficiently dry before the next processing step is carried out 7 Test application on the original base under practical conditions necessary 8 Combined application of stain and oil need particularly intensive care The number of applied layers of oil significantly determines the resilience of the parquet surface 9 Following this do not treat white or light colours with colourless oil 10 Fill and pad in residue NOBRWN NOTES 59 60 STANDARDS CERTIFICATES Standards Certificates ChemVOC FarbV Decopaint fahig Regulation ATV DIN 18356
72. current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 RESIN OIL 21 HessellllLisnas COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 22 NATURAL OIL Hesse NATURAL OIL OE 83 x degree of gloss Wf _ elif Hess ignal 9 COATINGS di Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm E 2 www hesse lignal de Oil with linseed oil base also with alkyde resin modified with natural oil with addition of leadand cobalt free siccatives viscoplastic abrasion resistant diluted with iso paraffin For open pored vapour permeable surfaces Emission tested building product according to DIBT rules German Institute for constructional engineering NATURAL OIL Fields of application Technical data For parquet and furniture coatings for surface Delivery Condition liquid mm 20 C according to treatment of wood used in the interior area Shade brownish such as living room bedroom and children s Supply viscosity 15 19s5 DIN4
73. d sanding oft he raw wood Treatment Mix Hesse WHITE SOAP at the ratio of 1 5 1L into 5L water with lukewarm water and wipe the wooden floor in direction of the grains with a gently wrung out swab Subsequently allow the surface to dry If required repeat this procedure 1 3 times Do not wipe with clear water Subsequently if required the surface can be polished slightly with a one disc machine with white non abrasive pad This will additionally compact the surface Technical data Delivery Condition liquid Shade whitish Supply viscosity 38 585 DIN 4 mm 20 C Non volatile 7 components Density 1 02 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 40 C Please note actual Safety Data Sheet Application method Wipe misty moist Do not rinse with clear water If required the dry surface may be slightly polished with a white non abrasive pad Special advice Attention A parquet surface which is treated with soap only has a low chemical and mechanical resistance and must be regularly cleaned and refreshed Keep in a locked place out of reach of children Only bring completely empty containers to the recycling centre collec tion site General guidelines for handling Test on original surface before application Hints for cleaning and care Please observe the care instruction according to DIN 18356 Wipe parquet with soft cloths slightly damp
74. dients anionic surfactants specifications 56 15 scents according to regulation Benzisothiazolinone EC no 648 2004 Methylisothiazolone Data Sheet for medical info hesse lignal de staff available under Giscode GE10 pH value 10 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Status 06 05 11 44 WHITE SOAP Hesse WHITE SOAP GR 1900 0700 Hessel ignat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Solvent free biodegradable cleaning solution for surface treatment cleaning and care of light parquet wood floors or furni ture surfaces Odourless pigmented and water dilutable WHITE SOAP TOX RESPONS Does not contain any hazardous substances according to annex XIV of EU regulation 1907 2006 REACH Status 06 05
75. ding to DIBt rules German Institute for constructional engineering applied for DIN 68861 part 1B DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simulation No discolouration Level 5 PVC resistant Status 07 11 13 Fields of application For parquet coating for surfaces with highest resistance to chemical and mechanical strain therefore ideal for intensely stressed surfaces Handling guidelines Two to triple coat application with 100 120 g m on properly prepared substrates max total moist application amount 400 g m Ground treatment Proper sanding of the suitable substrate grain size 120 dust removal Slight interim sanding grain size 120 180 single disk sander The quality of the wood sanding is a decisive factor for the quality of the final surface Stir material well before use Drying Dependent on amount applied temperature of lacquer and surroundings humidity application process and substrate material Accessibility after 1 5 2 h Too high humidity low temperature or insufficient air exchange may significantly prolong the evaporation interval UV curing with suitable mobile UV lamp unit e g Floormate by company DecoRad or comparable 1 Hg lamp 80W cm forward feed ca 7 m min Please follow the processing and handling instructions and wear the personal protective equipment Recoatable Possible with itself or with suitable colourless materials see und
76. dity of 65 Recoatable without intermediate sanding after 100 120 min 20 C with Hesse HYDRO parquet lacquers Application example Planed timber floor boards oak Wood sanding grain size 100 Base coat 1 x 100 120 g m Hesse PRIMER PLUS with a suitable roller Intermediate drying 100 120 min 20 C Coating 2 x 100 120 g m Hesse PURA ONE Intermediate drying for at least 2 3 h 20 C Intermediate sanding grain size 120 Intermediate sanding before the final lacquer coat with single disk sander and sanding grain size 120 150 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C Technical data Delivery Condition Liquid Shade colourless Supply viscosity 14 15s DIN4 mm 20 C Non volatile 34 36 components Density 1 027 kg l at 20 C 26 weeks in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Storage stability Application method Shake well before use Roll with a suitable roller Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 Special advice For woods with ingredients which interfere with handling treatment i e jatoba we recommend pre priming with OE 83 9 MV 10 1 with hardener OR 87 see Product Info OE 83 9 General guidelines for handling Of Hydro materials The wood moisture should lie between 8 12 Please do not process
77. dorfer Str 21 D 59075 Hamm www hesse lignal de p ni PARQUET COLOUR The natural beauty of a wooden floor is enhanced by use of parquet stains developed by p Hesse When used in conjunction with Hesse Oil Sealer it is possible to produce individual exclusive effects that can cope with the highest possible stress and strain There are a number of features to note not including the normal preparations and processing of the parquet stain in order to permanently retain the value of the stained and subsequently oiled surfaces d 1 Parquet and stairs will inevitably show signs of use When this appears will depend on the scope magnitude type and intensity of the stress placed on the surface 2 Stained wooden flooring requires an oil layer of sufficient strength to ensure adequate protection The more oil applied to the surface the higher the resilience it will have I insufficient oil sealer is applied the protective effect is accordingly low and the stain can rub off For example exposure to moisture floor cleaning water etc can in extreme cases cause the colour and stain appearance to change 3 Proterra Oils are not suitable for use on parquet stains since they do not provide the protection needed for this application 4 In order to preserve the longevity of wood flooring it is essential to regularly clean and care for the surface Timeframe is dependant on the level of wear but it is advisable regardless of
78. duct fulfills the specifica tions of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Emission tested building product according to DIBT rules German Institute for constructional engineering permit no Z 157 10 61 Emission tested building product according to DIBT rules German Institute for constructional engineering Status 09 05 11 Fields of application In the living area also for heavy loaded parquet and wooden floors Handling guidelines Double coat application with 100 120 g m on properly prepared substrates The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment of professionally laid wood flooring Final sanding of wood floor with grain size 100 120 dust removal Intermediate sanding grain size 120 150 dust removal The quality of the wood sanding is a decisive factor for the quality of the final surface Add the hardener to the original lacquer can and immediately shake for 1 2 minutes Do not mix in the application container Follow the exact mixing ratio also for partial quantities and shake the mixture well Use mixture only within the specified processing time Do not store ready mixed material in a close can Do not use any electric stirring devices danger of foam and or bubble formation Handling interval 2 3hat20 C Pot life 3 4hat20 C Drying De
79. e art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 30 NATURAL COLOUR OIL Hesse NATURAL COLOUR OIL OB 83 colour tone 977 m Cil with linseed oil base also with alkyde resin modified with natural oil with addition of leadand cobalt free siccatives pigmented viscoplastic abrasion resistant containing light protector For open pored vapour permeable surfaces Emission tested building product according to DIBT rules German Institute for constructional engineering ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de NATURAL COLOUR OIL Fields of application TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds ChemVOC FarbV Decopaint fahig Product fulfills the specifications of the Directive on
80. e texture Sanding dust from the edges is particularly well suited The finer the san ding dust the better the adhesion in the joints Intermediate sanding roll sanding machine grain size 100 120 single disk sander grain size 120 150 No gap putty residues must remain on the surface danger of spot formation Drying With good ventilation and max humidity of 0 Sandability after 30 60 min 20 C for 1mm gaps for 2mm gaps drying over night Subse quent treatment with all products from the Hesse parquet range PUR Hydro lacquers and oils Application example Mosaic style parquet oak with flaws Wood sanding grain size 100 Mixing Hesse Solvent WOOD FILL with clean oak sanding dust grain 100 Puttying 1 x on the entire surface Hesse Solvent WOOD FILL Mixture with clean oak sanding dust grain 100 Intermediate drying 30 60 min 20 C Plane sanding grain size 100 150 except for the raw wood Coating 1 x 100 120 g m Hesse PRIMER PLUS with a suitable roller Drying for at least 2 3 h 20 C Technical data Delivery Condition Liquid Shade colourless Supply viscosity 60 80s DIN 4 mm 20 C Non volatile 11 13 components Density 0 86 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature appr 10 30 C Further information on storage Accidentally frozen material can be re used following thawing and heating to 20 C without
81. ear in the closed original container Storage temperature 10 40 C Please note actual Safety Data Sheet Application method Wipe misty moist Do not rinse with clear water If required the dry surface may be slightly polished with a white non abrasive pad Since the final colour tone is formed by the chemical reaction between the soap solution and the wood ingredients it will slightly change after any new application of lye The developed colour tone is not colourstable Special advice Attention A parquet surface which is treated with soap only has a low chemical and mechanical resistance and must be regularly cleaned and refreshed Keep in a locked place out of reach of children Only bring completely empty containers to the recycling centre collection site General guidelines for handling Test on original surface before application Hints for cleaning and care Please observe the care instruction according to DIN 18356 Wipe parquet with soft cloths slightly damp only not wet Please only use cleaning agents which are neutral and do not contain any silicone ammonium chloride and abrasives Regular cleaning and care with Hesse BROWN SOAP GR 1902 will increase the life span of the parquet surface BROWN SOAP 43 Hesse BROWN SOAP GR 1902 Hesselluignan COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Ordering hints Order no GR 1902 Container sizes 1 5 Ingre
82. ebuilt again The use of a mobile ra diator requires well founded knowledge The use of personal protective equipment is a stringent necessity to avoid impairment to health Please follow the corresponding company ruling and the user manual of the device manufacturer The regular professional cleaning and care with e g Hesse PROTECT CLEANER or other Hesse parquet care products ensures the long lasting protective function of the sealing layer To minimise the risk of side glueing critical substrates such as i e wooden pavement upright ribs planed floor boards parquet on underfloor heatings etc require a proper pre treatment with Hesse Primer Ultra HG 24 Parquet floors which have already been lacquered with solvent containing systems should only be touched up with systems which contain solvents to prevent the risk of spot formation General guidelines for handling Of Hydro materials When processing HYDRO materials any material containing parts must be made of stainless steel The wood moisture should lie between 8 12 Please do not process and dry HYDRO lacquers at RT below 18 C The ideal humidity for application lies between 55 65 To avoid adhesion problems please freshly sand the lacquer surfaces before application and whenever possible immediately apply the top coat to the sanded surfaces Under certain circumstances timbers with a high wax content i e teak have a negative influence on the bonding Water soluble
83. eid priority to us This includes collaborating with our very efficient authorised dealers who not only sell our products but as industry professionals stand ready to offer first class advice and practical help Our delivery centres are supplied reliably quickly and punctually but also receive comprehensive support whenever they need it We conduct training programs for dealers trade employees and timber merchants processors topics include product trends knowhow processing and handling of Su Lats Jl p i Ey x Tulle Hm aT ms ss m til i We can also gladly provide on the ground assistance ensuring your vision and piece of mind remain on track whatever the project Hesse s famous Lacktuell newsletter also offers an insider look at current industry developments beautifully complementing the Hesse catalo gue and stain chart collection This dedication and attention to detail come together to make Hesse Lignal the number one choice for first rate lacquers and stains 6 CONTENT HESSE PARQUET RANGE PRODUCT OVERVIEW iae M FILL Gap filling solution for mixing with sanding dust 9 for flexible joint filler Hydro primer for parquet and wooden floors with a di tendency to side glueing and blocking brightening PRIMER PLUS HG 22 page 51 Hydro Primer for parquet and wooden floors with a A A dg tendency to side and block bonding with good wood erain enhancement PRIMER ULTRA
84. er Special Guidelines Application example parquet oak industrial upended parquet Pre treatment of the carrier Wood sanding graduated with grain size 80 120 Puttying Hesse WOOD FILL HS 11 Drying appr 1 h 20 C Sanding graduated with grain size 80 120 dust removal Base coat 1 x 80 100 g m Primer ULTRA HG 24 with a suitable roller Drying appr 1 5 2h Coating 1 x appr 100 120 g m Hesse HERKULITE HUE 86064 semi gloss with a suitable roller Drying 2 h at appr 20 C UV hardening 1 x with suitable mobile UV lamp unit e g Floormate by company DecoRad or comparable 1 Hg lamp 80W cm forward feed ca 7 m min Please follow the processing and handling instructions and wear the personal protective equipment slight interim sanding grain size 120 150 with one disc sanding machine dust removal Coating 1 x appr 100 120 g m Hesse HERKULITE HUE 86064 semi gloss with a suitable roller Drying appr 2 h 20 C UV hardening 1 x with suitable mobile UV lamp unit e g Floormate by company DecoRad or comparable 1 Hg lamp 80W cm forward feed ca 7 m min Please follow the processing and handling instructions and wear the personal protective equipment Now the surface is ready and after short cooling time it can be burdened immediately If required the surface can be slightly sanded once again and once recoated with Hesse HERKULITE HUE 8606x with following drying and UV curing G
85. etergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Status 19 11 13 42 BROWN SOAP Hesse BROWN SOAP GR 1902 SLLe Solvent free biodegradable soap solution for surface treatment cleaning and care for dark soaped parquet wood floors or furniture surfaces odourless and water dilutable BROWN SOAP p TOX RESPONS Does not contain any hazardous substances according to annex XIV of EU regulation 1907 2006 REACH Status 06 05 11 Fields of application As cleaning and care agent for dark or darkly soaped leached parquet or wood floors and furniture surfaces Or as soap solution directly on raw wood This way a dark wood depending soap effect is produced not applicable for mirrors or marble Handling guidelines Single and multicoat application with on suitable carriers Ground treatment Sweep or hoover loose dust and dirt Remove other soilings completely Due to the high humidity load the soap technology is not recommendable on moisture sensitive carriers e g beech wood paving etc Also cleaning and care must be made slightly damp only As cleaning and care agent for dark or darkly soaped surfaces Mix Hesse BROWN SOAP at the ratio of 2 100 100 ml into 5 L water with water apply this cleaning solution evenly but n
86. floor down to the wood fill joints and reseal Damage and prevention of sealed parquet surfaces 10 Drying Hardening Cause Bad drying conditions As well as temperatures from min 15 max 25 C there must also be sufficient air exchange Water vapour in saturated air must be regularly exchanged with fresh air so that the given drying times can be achieved and the desired properties of the coating material can be formed Also with 2C lacquers the mixing ration not adhered to Too low temperatures and or too high humidity and or too thick application of lacquer Solution Take care of mixing ratio with 2C lacquers Room mate rial temperature not below 18 C ideal 18 25 C Humidity within 40 70 ideal 55 65 Wood moisture between 8 129296 Make sure there is enough air exchange draught free Correction Adjust room temperature and provide air exchange no draught In extreme cases complete sanding and re construct 11 Protrusions Cause Wrong method due to uneven application Wrong tools Tempera ture too high gt 25 C Solution Apply evenly wet on wet Careful application without too much too little overlapping Do not work into areas too dry Use suitable roller or brush Work with several people on large surfaces and coordinate the work directions beforehand Avoid temperatures gt 25 C lacquer early mornings or evenings Turn off under floor heating in time Possible use
87. free cleaned sur face a new maintenance procedure or another suitable surface treatment is required Drying Dependent on the climatical conditions The surface must be absolutely dry before further treatment with care products or with coordinated surface treatment products Recommendation preferably over night at approx 20 C Following treatment After full drying of the residue free cleaned surface a new maintenance procedure or another suitable surface treatment is required Technical data Delivery Condition liquid Shade blue Supply viscosity 11 s DIN 4 mm 20 C Density 1 01 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 40 C Please note actual Safety Data Sheet Application method Apply the material evenly on the floor with a suitable swab dust mop or similar Alternatively after applying the cleaning solution with appro priate exposure you can also work with a Mo nodisc with a white pad to loosen the dirt Then again the floor must be cleaned with clear water to remove the dirt completely To remove larger quantities of residues of care products or other soilings this process can be repeated if necessary Warning too much water and or too long ex posure time may cause swelling of wood and may damage the wood That s why this shall be carried out preferably by qualified personnel Residues of the Remover on the surface have influence on the
88. ge evaluation group state occupational safety regulations Fome to To R 9 laws regulations and or greater than 10 to 19 R 10 trade association regulations greater than 19 to 27 R11 accident prevention regulations and or greater than 27 to 35 R 42 technical specifications and or the experience of trade association prevention work greater than 35 R 13 The method for testing slip resistance is specified in DIN 51130 Testing of floor coverings regu lates determining slip resistance workspaces and work areas with increased risk of slipping inspection methods inclined planes The surface to be tested is mounted on the test device and contaminated with a certain amount of stan dard mineral oils TYPICAL PARQUET TESTS 65 Typical parquet tests Hessellll Ligna COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Testing agent and stress groups High quality industrially produced parquet surfaces are tested amongst others according to EN 13442 The extreme demands required in this standard are only fulfilled by certain industrially produced UV systems Therefore most of the coating materials used in the trade are tested accor ding to the better known in the furniture industry DIN 68861 This DIN standard uses more test substances and focuses on practice oriented effective duration U gt e gt Test substance E AN 14
89. h sufficient air movement 6 Colour scheme stain WPB1 colour tone apply roll spray with good but not excessive wetting and immediately work in to the surface using the aforementioned single disc machine white pad until completely absorbed into the wood Rotation marks from the single disk machine indicate an excess of stain that must be levelled out For large surfaces the pad must be changed when necessary Slight damping of the pad with water eases the distribution of the stain Finally remove any excess in the corner regions by hand Work larger surfaces in pairs 7 Drying time overnight with at least 16 hours 20 C with sufficient air movement 8 Top coating preferably water based for all Hesse parquet sealers When sealing with oils please note the separate recommendation D e PROTECT CLEANER INTENSIVE CLEANER TIPS AND TRICKS 69 Tips and tricks on parquet surface design WM p parq 5 Hessel Lignal BROWN SOAP GR oor fee bert eee WHITE SOAP freer Gert eee a AQUA REFRESHER Lym enb iiaee REMOVER E AQUA REFRESHER MATT _ COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Basics for parquet surface design Theoretically almost everything is possible with parquet surface design but nowhere near everything is sensible or recommended without correct information and prac
90. he surface and allow it to dry properly Remove extreme pollutions with Hesse Remover OS 5600 Allow the surface to dry sufficiently The material should be diluted 1 1 with water before use The concentration of the material depends on the severity of wear marks on the parquet surface and can be adjusted accordingly The more affected the surface is the higher should be the concentration of AQUA REFRESHER The last application should be made in vegetation grain direction Drying Accessibility after 2 h 20 C Full load capacity after 24 h 20 C Gloss level semi gloss Technical data Delivery Condition liquid Shade whitish Supply viscosity 11 s DIN 4 mm 20 C Density 1 01 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 40 C Please note actual Safety Data Sheet Application method Apply the material evenly on the floor with a suitable swab dust mop or similar Special advice For varnishing of old and unattractive surfaces defers the new wear and tear In case of larger surfaces it is useful to separate into sections The desired gloss is formed automatically Do not wipe into already dried sections Danger of streaks building Avoid draught and dust raising in humid condition Existing coating components especially on older surfaces or on prefinished wood parquet can possibly cause bonding problems of the care product For this reason always make
91. iner sizes 1 25 Giscode W2 Keep locked and out of the reach of children Please dispose completely empty containers only General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 APPLICATION MAINTENANCE PRODUCTS 49 Application maintenance products Y PP P Hessel Lignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Parquet structure Sealed Oiled and waxed Maintenace Small medium high highest Natural oil Synthetic Finished product stress stress e g resin oil e g parquet GE 11254 OE82 OE 83 AQUA REFRESHER OE 5670 AQUA REFRESHER MAT OE 5670 0001 PROTECT OIL OE 88 2 NATURAL SOLID OIL GE 11254 E Initial care U Maintenance care G Thorough cleaning A Refresh R Repair Beforehand carry out repair test on a less visible
92. information indicated here Also please refer to our terms and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Hesse AQUA REFRESHER OE 5670 AQUA REFRESHER 47 elif Fess ignal COATINGS _ Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de is an environment sparing care agent for highly loaded surfaces which were produced with Hesse Parquet Hydro finishes UV Oil Oil UVand Oxi Oil systems The surface is refurbished by application of Hesse AQUA REFRESHER Scratchy and dull surfaces become attractive again and the further fading is retarded AQUA REFRESHER Alt TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Status 21 11 13 Fields of application For panel and floor coating not suitable for mirrors marble or non slip surfaces Handling guidelines Single coat application Ground treatment Remove loose dirt by vacuum cleaner or fine broom For base cleaning of water soluble pollutions add Hesse INTENSIVE CLEANER PR 91 into the cleaning water and clean the floor Subsequently wipe t
93. ints dull mat DE 45320 mat DE 45322 semi mat DE 45324 silky gloss DE 45327 Container sizes 5 25 Hardener DR 4071 Container sizes 0 1 0 5 1 2 5 5 10 hardener Productivity per litre 6 8 m Thinner DV 4900 DV 4994 Retarder DV 4909 add max 5 10 96 Cleaning thinner RV 1 ZD 82 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the information indicated here Also please refer to our terms and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Status 06 05 11 58 COMBINATION POSSIBILITIES Combination possibilities Hessel figna LACKE amp BEIZEN _ Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Sealing Primer UNA ELITE PURA ONE PURA NATURAL OIL RESIN OIL NATURAL HERKULITE HE 31 GG HDE 51 NATURA OE 83 GG OE 82 GO SOLID OIL HUE HDE 52 0 GE 11254 8606x GG WOOD FILL HS 11 ef as a f ef PARQUET COLOUR 6
94. ipe and if possible let it dry overnight For persistent spots and dirt sand the entire surface do not sand through all layers grain size 240 dust removal Mixture 10 1 with OR 87 increases the mechanical and chemical resistance of the surface Processing time of the mixture 1 hour at 20 C Adding hardener accelerates the complete drying Material dries by oxidation please Observe the general guidelines for processing Drying Good ventilation necessary Accessibility after 24 h 20 C Complete hardening 10 14 d 20 C The parquet may not be covered with foils or carpets before having attained the final hardness Recoatable with itself Application example woodfloor Beech oily heavily soiled Clean the floor according to regulations Polish Coating 1 x 10 20 g m Hesse PROTECT OIL putty and pad in immediately afterwards Accessible after 24 h 20 C Full load capacity after 10 14 d 20 C Gloss level 12 16 Gloss 36 um mat DIN 67530 60 application on photo cardboard Technical data Delivery Condition liquid Shade brownish Supply viscosity 31 39 s DIN EN ISO 2431 4 mm Non volatile 50 51 components Density 0 933 kg l at 20 C Flashpoint aT Storage stability 1 year in the closed original container Storage temperature 15 25 C Further information on storage Due to the high reactivity skin formation may occur please remove skin before stirring Storage cl
95. ith e g OE 82 GG Hesse RESIN OIL OE 82 x degree of gloss Status 23 09 13 General guidelines for handling Of oxidativ drying materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat accumulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose these in closed containers Please make a test coating under practical working conditions Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints semi mat OE 82 4 silky gloss OE 82 7 Container sizes 172 51 Hardener OR 88 Container sizes 0 25 hardener Hardener OR 87 Container sizes 0 25 hardener Productivity per litre 25 33 m Thinner OV 5100 for objects which are subject to ChemVOVFarbV decree add max 10 96 Post treatment care PR 90 PR 91 products Giscode KH1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively
96. king Emission tested building product according to DIBT rules German Institute for constructional engineering associated with Hesse Hydro lacquers _ PRIMER p v TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP Decopaint f hig Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Emission tested building product according to DIBT rules German Institute for constructional engineering associated with Hesse Hydro lacquers Z 157 10 61 General technical approval surface coating for parquets and wooden floors Status 23 01 13 Fields of application e g under Hesse PURA NATURA in order to prevent the risk of side glueing on wooden pavings upright blades planed floor boards and parquet on underfloor heatings Handling guidelines Non recurring application with 100 120 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 dust removal Fill gaps properly with Hesse WOOD Fill see respective Technical Data Sheet Drying Good ventilation necessary Initial drying 15 min 20
97. le we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Hesse WOOD FILL HS 11 Status 06 05 11 Ordering hints Order no HS 11 Container sizes 53 Productivity per litre 10 20 m Thinner HS 11 Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Giscode W2 General advice exclusion Our technical information is constantly upda ted according to the state of the art and the applicable legal requirements You can find the respectively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consultatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the information indicated here Also please refer to our terms and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 WOOD FILL 9 HessellllLisras COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 10 PRIMER Hesse PRIMER HG 21 KP SE elllfuigna Hess _ COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de One component HYDRO Base coat brightening fast drying for light wood for parquet and wooden floors with tendency to side glueing and bloc
98. led For large surfaces replace pad if necessary To simplify the dispersion process the pad can be slightly moistened with water if necessary In the area of the edges remove the excess manually with a piece of pad Special advice All stains from the same series can be mixed with each other Shadings possible with Hesse colour concentrates of the series BP 3011 BP 3031 BP 3034 BP 3038 25 BP 3051 BP 3061 BP 3091 BP 3570 Brightening possible with WPB 1000 Maximum amount for adding BP concentrates in total 5 Before use thoroughly stir or shake stains and concentrates Hesse PARQUET COLOUR WPB 1 x Farbton Status 11 04 13 General guidelines for handling Of stain To attain an attractive result please observe these guidelines staining is handwork and requires the corresponding level of experience To be used preferably on hardwood such as oak and beech The raw wood reacts differently according to the area in which it grew and the ingredients it contains also according to the sanding of the raw wood this influences the shade and effect of the staining to an extent that should not beundervalued especially the grain run of the woods e g in swirls limbs etc is accentuated to create a lively appearance This especially applies to fine pored woods such as beech and maple Woods e g oak rich in tanning agents can lead to a yellow to yellowish brown colour tint This discoloration occurs more often when l
99. ling interval 2 3hat20 C Pot life 3 4hat20 C Drying Dependent on amount applied temperature of lacquer and surroundings humidity application process and substrate material Sandable and recoatable after 2 3 h 20 C Accessibility after 8 h 20 C Full load capacity after 10 d 20 C The parquet may not be covered with foils or carpets before having attained the final hardness Application example parquet oak Wood sanding grain size 100 Coating 2 x 100 120 g m Hesse PURA ONE with a suitable roller Intermediate drying for at least 2 3 h 20 C Intermediate sanding grain size 120 Intermediate sanding before the final lacquer coat with single disk sander and sanding grain size 120 150 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C Gloss level 8 12 Gloss 125 um 18 22 Gloss 125 um 37 43 Gloss 125 um Technical data Delivery Condition Shade Supply viscosity Non volatile components Density Storage stability Storage temperature mat semi mat silky gloss DIN 67530 60 application on photo cardboard Liquid colourless 18 225s DIN4 mm 20 C 39 41 after mixing 1 03 1 045 kg l at 20 C 1 year in the closed original container 10 30 C Please note actual Safety Data Sheet Application method Shake well before use Spraying possible Addition of water required Work in the hardener well before
100. loss level mat semi mat gloss Technical data Delivery Condition Liquid Shade colourless Supply viscosity 22 28s DIN4 mm 20 C Non volatile 40 41 components according to degree of gloss Density 1 06 1 065 kg l at 20 C 26 weeks in the closed original container Storage temperature 10 25 C Please note actual Safety Data Sheet Storage stability Application method Brush Roll with a suitable roller Clean tools with water Dried lacquer residue can be removed with Hesse CLEANING AGENT DV 49 HERKULITE 37 Hesse HERKULITE HUE 8606 x degree of gloss Wf UT Hesse Lignal Status 07 11 13 Special advice Shield opened containers from light with proper cover lid Close after use Remove dried up lacquer residues with a sieve Due to the high side bonding effect of hydro UV products Hesse HERKULITE HUE 8606x GG should not be used without proper primer on sprung floors underfloor heating or shear resistant glued parquetand also not on wooden paving planks or upended parquet without side impregnation In these instances it is essential to use a suitable primer e g Hesse Primer Ultra HG 24 Attention Before irradiationof the dried sealing coat the seal layer must be completely moisture free This is ideally tested by moisture measuring device In the event of non compliance there may be disturbances in film building and or adhesion In this case the surface must be sanded off com pletely and r
101. lueing and blocking for prevention of discolorations on tannin containing timbers like e g oak elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de PRIMER ULTRA TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP Product fulfills the specifica tions of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline General technical approval surface coating for parquets and wooden floors applied for Status 11 07 13 Fields of application under Hesse parquet lacquers to minimise the risk of side glueing of wooden pavings upright blades planed floor boards and parquet on underfloor heatings Preferred use under Hesse HERKULITE HUE 8606x gloss degree in order to reduce the side bonding effect Handling guidelines Non recurring application with 80 100 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 120 dust removal Fill gaps properly with Hesse WOOD Fill see respective Technical Data Sheet Drying Good ventilation necessary Initial drying 15 min
102. mechanical with cotton cloths TOX RESPONS and chemical resistance of the surface WW SA Processing time of the mixture 1 hour at 20 C Air spraying cup gun Hardener contains isocyanate please observe Spray nozzle size 1 5 1 8 mm DIN EN 71 3 2002 11 safety guidelines see SdB Material dries by Spray pressure 2 3 bar safety of toys oxidation please observe the general guidelines for processing Airless spraying Spray nozzle size 0 23 0 28 mm Drying Spray pressure 50 80 bar Dependent on application amount material and ambient temperature application method and Manual application Product fulfills the substrate material Sand in with sanding fleece and remove surplus eg We ei or ihe Forced drying possible 30 40 C with cotton cloths Directive on Dyes and ue Lacquers containing Rack drying Oxidative drying packable solvents completed after 16 24 h 20 C Roll with roller smooth roller Perbonan quality ChemVOCFarbV from Recoatable Completely remove excess with sisal brushes 23 12 2004 Decopaint Possible with itself or with suitable colourless or Molton aggregate guideline materials see under Special Guidelines Application by putty machine manual Application example subsequently apply by white sanding fleece In each case the application method and the without residue exact application parameters are adjusted to the application and drying conditions They can Special advice be learned from the customer s spe
103. n amount as well as Ordering hints TOX RESPONS lacquer and ambient temperature Recoatable Order no ZD 4540 a appr 30 45 min 20 C Container sizes 5x5 Recoatable with Hesse HYDRO parquet lacquers Productivity per litre 10 12 m Formulation thee ree Retarder DV 9 meals ener Application example MEME LI phthalate based Base coat 1 x 100 g m Cleaning thinner DV 9 plasticizers CMR materials Hesse Special Base coat ZD 4540 Giscode G 1 Classes 1 2 volatile Intermediate drying 1 3 h 20 C halogen organic compounds Coating 2 x 100 120 g m Fulfils DIN EN 71 3 2002 11 Hesse PURA ONE HDE 51 4 General advice exclusion UA ED Mixture 10 1 HYDRO PUR Hardener HDR 71 Our technical information is constantly updated Intermediate drying appr 6 h 20 C according to the state of the art and the applica Complete drying gt 16 h 20 C ble legal requirements You can find the respec Full load capacity gt 5 d 20 C tively current version on the Internet or contact better after one week the customer service representative in your area The specifications on this Data Sheet are consul Technical data tatory in character they are based on the best Delivery Condition Liquid of our knowledge and careful analyses according Shade colourless to the current state of the art A legal force can Supply viscosity 45 55s DIN4 not be deduced from the information indicated mm 20 C here Also please refer to our terms and con Non
104. ompletely removed Solution Coat with primer straight from container Sand old lacquer without trace Use special primer Only use tested material combinations Correction Sand down to the raw wood Completely remove residue Disintegration of the joint s filler Cause The ratio of joint putty with sanding powder does not match Lack of bonding amongst itself and with the wood base with too much sanding powder With fine sanding the joint putty will to a large extent be torn from the joints Joints that are too large are under filled The joint putty sags in deep joints and disintegrates Solution More joint putty and less sanding dust Joint putty still absorbs sanding dust over the surface If neces sary putty a second time shifted 90 Correction Sand whole floor down to wood Re putty the joints and reseal 8 Orange skin wrinkles Cause Previous lacquer layer detaches again and lifts upwards Possibly ap plication quantity too high of existing sealing layer resulting in insufficient drying Drying parameters not obser ved wrong material combination of primer and sealing Solution Adhere to drying times between lacquer layers Calculate longer drying times in the case of low temperatures and or high humidity Use suitable material combinations Correction Sand the whole floor well and reseal ell ina Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 H
105. on example woodfloor oak white Wood sanding grain size 150 Base coat 1 2 x 20 40 g m Hesse PRIMER WHITE OIL Mixture 10 1 Hardener OR 87 putty and pad in immediately afterwards Intermediate drying for at least 16 h 20 C Final coat 2 x 100 120 g m Hesse PURA Natura Mixture 10 1 Hardener HDR 72 Intermediate drying appr 16 h 20 C Intermediate sanding with grain size 120 er with sanding lattice Accessible after 24 h 20 C Full load capacity after 10 14 d 20 C Technical data Delivery Condition liquid Shade white Supply viscosity 20 24s DIN4 mm 20 C Non volatile components 59 5 60 5 Density 1 01 1 012 kg l at 20 C Flashpoint a 21 C Storage stability original container Storage temperature 1 year in the closed T9295 Further information on storage Due to the high reactivity skin formation may occur please remove skin before stirring Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Manual puttying putty or roll thinly immediately thereafter pad grind in Larger surfaces should be treated by two people Special advice Material is not suitable for woods which are prone to bluing in wet rooms General guidelines for handling Of oxidativ drying materials For cotton cloths cardboard and paper soaked in oil there is a danger of self ignition due to heat acc
106. orce can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Hesse INTENSIVE CLEANER PR 91 INTENSIVE CLEANER 41 elllfuigna COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Cleaner product for wooden floors based on pH neutral and biodegradeable tensides with high cleaning effect i INTENSIVE CLEANER TOX RESPONS Free of colurings and thickeners Fields of application For Cleaning for parquet and wooden floors as well as laminate PVC tiles and synthetic surfaces Handling guidelines Apply PR 91 diluted with water Intensive cleaning For strong dirt or for intensive maintenance add up to max 1 10 100ml PR 91 in 1 water For cleaning of Hydro lacquer surfaces or for lesser dirt add 1 500 20 ml PR 91 in 10L water Drying Recoatable Following proper pre treatment with products adjusted to the sealant Technical data Ordering hints Order no Container sizes Ingredients specifications according to regulation EC no 648 2004 further ingredients Report according to WRMYOG Product number Data Sheet for medical staff available under PR 91 1 51 5 non ionic tensides Contains scents 2 methylisothiazol 3 2 H one 1 2 benzisothia zol 3 2 H one isopropanol Company
107. ose from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a rule we recom mend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Ordering hints Order no HG 21 Container sizes 5 Productivity per litre 8 10m Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Giscode W3 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Hesse PRIMER PLUS HG 22 KP SES PRIMER 11 elif Fess ignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de One component HYDRO Base coat fast drying for parquet and wooden floors with tendency to side glueing and blocking Emission tested building product according to DIBT rules German
108. ot too wet with a swab and remove in the process the dirt from the surface Subsequently rinse the swab with clear water wipe the surface again with cleaning solution slightly damp and allow it to dry Do not re wipe with clear water Drying Recoatable Soap treated surfaces will always be cared and cleaned with special soap cleaners only In exceptional cases the surface may be carefully and slightly polished with a one disk machine and white pad Application example parquet oak treated with woodfloor soap Pre treatment of the carrier Clean professionally laid and correctly pre treated parquet wooden floor with graduated sanding oft he raw wood Treatment Mix Hesse BROWN SOAP at the ratio of 1 5 1L into 5L water with lukewarm water and wipe the wooden floor in direction of the grains with a gently wrung out swab Subsequently allow the surface to dry If required repeat this procedure 1 3 times Do not wipe with clear water Subsequently if required the surface can be polished slightly with a one disc machine with white non abrasive pad This will additionally compact the surface ell iona Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Technical data Delivery Condition liquid Shade red brownish Supply viscosity 14 31 s DIN EN ISO 2431 3mm Non volatile 14 926 components Density 1 02 kg l at 20 C Storage stability 1 y
109. oth the elegant appearance and interesting unusual colour variations found in these Woods Hesse PARQUET COLOUR WPB is a ready to use special stain for parquet flooring Even large areas can be stained evenly without any trouble Hesse parquet stain is water dilutable environmentally friendly and displays excellent light fastness The finest pigments available are used to produce stains that give you the desired effect with the minimal of effort Follow with PURA ONE HDE 51 degree of gloss sealer to complete the finish v DO 7 i i l3 L CC l OUR OIL YB 83 is oil In addition tt je presence e of a natu oil modified alkyd resin ensures O2 toughness flexibility an abrasion resistance Perfect Lfor spat ula application followed by padding or grinding The wear and abrasion resistance of the produ Jct is dependant on the number of coats applied All Hesse parquet stains and colours can be intermixed Your authorised Hesse dealer carries the full range of colours but should that not be enough we will match any colour to your exact specifications 28 PARQUET COLOUR Hesse PARQUET COLOUR WPB 1 x shade elllfuigna Hess _ COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de M Special stain for parquet staining ready for use water dilutable eco conscious with good light fastness Light fast finest pigments provide far reaching opacity on the wood substrate b
110. owledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 PRIMER ULTRA 13 Hessel IL ignat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 14 UNA ELITE Hesse UNA ELITE HE 31 x degree of gloss One component Hydro acrylic lacquer abrasion resistant viscoplastic well filling light fast with very good stability and resistance to foot tracks and typical household chemicals Multicoat lacquer for priming and top coating Product can be used on bleached wood Emission tested building product according to DIBT rules German Institute for constructional engineering elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de UNA ELITE p TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP Fulfils DIN EN 71 3 2002 11 safety of children s toys Pro duct fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Emission tested building
111. pendent on amount applied temperature of lacquer and surroundings humidity application process and substrate material Sandable and recoatable after 2 3 h 20 C ata relative humi dity of 65 Accessibility after 8 h 20 C Complete hardening after 10 d 20 C The parquet may not be covered with foils or carpets before having attained the final hardness Application example parquet oak Wood sanding grain size 100 Coating 2 x 100 120 g m Hesse PURA NATURA with a suitable roller Intermediate drying for at least 2 3 h 20 C Intermediate sanding grain size 120 Intermediate sanding before the final lacquer coat with single disk sander and sanding grain size 120 Accessible after drying for at least 8 h 20 C Full load capacity after 10 d 20 C Gloss level 2 4 Gloss 125 um dull mat DIN 67530 60 application on photo cardboard Technical data Delivery Condition Liquid Shade colourless Supply viscosity 30 40 s DIN EN ISO 2431 4 mm Non volatile 34 35 after mixing components Density 1 02 1 03 kg l at 20 C Storage stability 1 year in the closed original container Storage temperature 10 30 C Please note actual Safety Data Sheet Application method Shake well before use Spraying possible Addition of water required Work in the hardener well before adjustment of spray viscosity with up to 5 of water Roll Clean tools with water Dried lacquer residue
112. putty or roll thinly immediately thereafter 71 3 2002 11 safety of 20 C Adding hardener accelerates the complete pad grind in Larger surfaces should be treated children s toys drying Material dries by oxidation please by two people Stir well before use observe the general guidelines for processing Manual application Sand in with sanding fleece and remove surplus Drying with cotton cloths Good ventilation necessary Application of the next coat after 16 h 20 C Special advice Mar s at Accessibility after 24 h 20 C Material is not suitable for woods which are ixi oU Deana Full load capacity after 10 d prone to bluing in wet rooms The material s Lacquers containing The parquet may not be covered with foils or properties were tested on standard timbers solvents carpets before having attained the final such as oak beech etc When using on other ChemVOCFarbV from hardness woods please test adhesion before use In 23 12 2004 Decopaint order to avoid white pores on dark porous guideline Application example wood we recommend at least for the first layer E E parquet oak mat to use the glossy version of the oil Wood sanding grain size 120 150 Pre priming is possible e g with the following Coating 2 x 30 40 g m products according to the desired surface and Hesse NATURAL OIL OE 83 2 the respective substrate material Mixture 10 1 Hesse Hardener OR 87 putty OE 82 4 OE 82 7 General technical approval
113. r certain circumstances timbers with a high wax content i e teak have a negative influence on the bonding Water soluble wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Therefore as a rule we recommend to make a test coating to evaluate the colour effect adhesion and the drying process under practical conditions Guidelines for cleaning and care Please note care instructions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral deter gents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints mat HDE 51 2 semi mat HDE 51 4 silky gloss HDE 51 7 Container sizes 4 5 Hardener HDR 71 Container sizes 0 45 hardener Productivity per litre 8 10m Thinner H2O max 5 only for spray application Hesse DV 9 CLEANING AGENT for removing dried lacquer residues Post treatment care products Giscode W3 DD PURA ONE 17 Hesse ll Lisnas COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respecti
114. racter they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the information indicated here Also please refer to our terms and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 SPECIAL BASE COAT 53 Hesse Special Base coat ZD 4540 SI Hesse Iiii L i ignal g S COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Special one component Primer aromates free especially transparent brilliant glossy drying clear with especially good bonding to critical substrates Primer for parquet and wooden floors SPECIAL BASE COAT Fields of application General guidelines for handling For parquet coating Not suitable for applications Of NC materials within the scope of ChemVOCFarbV or under Please perform test lacquering under pracical EC Guideline 2004 42 EEC Decopaint conditions Wood quality sanding and working technique influence the quality of the surface Handling guidelines The working proposals are based on state of Single coat application with 80 120 g m the art processing technology Our statements on a prepared substrate Ground treatment should be regarded as recommendation and Proper sanding of the suitable substrate require a thorough examination with regard to their conversion in any case Drying Depends on applicatio
115. rasion limitation being particularly notable Schematic procedure of the hardening reaction liquid low molecular solid high molecular network monet P photoinitiator basic state prepolymers P photoinitiator animated state Special protective considerations are necessary during the UV curing process Please read the relevant technical information before use or consider visiting us to take advantage of one of our courses on the subject UV Finally optimised for professional use on site Walkable surface UV APPLICATION 35 eli Hess ignal COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 36 HERKULITE Hesse HERKULITE HUE 8606 x degree of gloss Hessel isnat COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Water dilutable UV curing Parquet Finish for non industrial application solvent free clear ready for use highly scratch and scrub resistant Top class sealer for open and closed pore structures on suitable substrates with very good resistance to chemical and mechanical strain HERKULITE AL TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Fulfils DIN EN 71 3 2002 11 safety of children s toys Emission tested building product accor
116. rder to allow the applicable interpretation In addition the thickness of the coating has of course a serious impact on the results 64 TYPICAL PARQUET TESTS Typical parquet tests elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Then the examiner walks over the surface wearing safety shoes with a standardized sole During the inspection the tilt of surface is adjusted Resiliency Ball drop test Tested with the so called impact loading test device according to Wegner A metal ball with a designated spring force is shot on the test surface It leaves an impression obvious to a greater or lesser extent depending on the hardness of the undercoat It is tilted so long as the examiner still has the feeling to be able to walk safely Quelle Fa Erichsen Fine cracks in the coating are visible by staining the tested surface The pressure is specified where first continuous circular damage occurs Comparability of the results is only possible for tests on the same undercoat Slip resistance BGR 181 Flooring in workspaces and areas with danger of slipping German Trade Association Regulations for Health and Safety at Work BGRegeln are compilations or ascertainment of contents from for example The angle of tilt is then read and results in the classification of the appropriate R group Overall avera
117. s and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 38 PROTECT OIL Hesse PROTECT OIL OE 88 2 es 2u 2 Parquet oil based on linseed sunflower and jojoba oil also with alkyd resin modified with natural oil free of lead and colbalt siccatives hard wearing viscoplastic highly abrasion resistant for the application of the putty with subsequent paadding or grinding technique For the care and repair of oiled floors elllfuigna Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de PROTECT Oll TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Fulfils DIN EN 71 3 2002 11 safety of children s toys Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Status 25 11 13 Fields of application for parquet and wooden floors which are coated with oil Handling guidelines Single coat application with 10 30 g m on suitable carriers Ground treatment Remove loose dirt with vacuum cleaner or fine broom For basic cleaning of water soluble dirt add Hesse INTENSIVE CLEANER PR 91 to the wipe water and clean the floor with this mixture Then w
118. sse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Cleaners and care products for furniture surfaces and wooden floors based on pH neutral and biodegradeable tensides H PROTECT CLEANER AL TOX RESPONS Free of colurings and thickeners organic solvents Status 19 11 13 Fields of application for parquet and wooden floors as well as laminate PVC tiles and synthetic surfaces not suitable for mirrors marble or non slip surfaces Handling guidelines Add to the wipe water for regular cleaning With this solution wipe misty moist not wet This way the surface is cleaned and maintained in one work process Maintenance care or regular cleaning and care for slight soilings dilute cleaner with water in the ratio 1 100 100 ml to 10 water Intensive cleaning for strong soilings or for thorough care if necessary use a higher dose up to max 1 10 100 ml to 1 water Stain removal for coffee tea milk juice urine blood PR 90 with water Drying Recoatable Following proper pre treatment with products adjusted to the sealant Technical data Delivery Condition liquid Shade whitish Supply viscosity 11 s DIN 4 mm 20 C Non volatile 3 3 96 components Density 1 0 kg l at 20 C Storage stability original container Storage temperature 10 40 C Please note actual Safety Data Sheet 1 year in the closed Application method Wipe misty moist
119. sses PUR Multicoat lacquer DE 45324 semi mat page 51 2C PUR Acrylic resin lacquer light fast strong filling MV 10 1 DE 45327 silky gloss 56 57 251 colourless Multicoat lacquer for priming and top DR 4071 coating with high wear resistance especially against mechanical stress Product can be applied on bleached wood 8 WOOD FILL Hesse WOOD FILL HS 11 WOOD FILI p TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Status 06 05 11 Fields of application for parquet and wooden floors for filling parquet gaps up to 3 mm wide and filling smaller imperfections Handling guidelines Manually putty once or twice with 50 80 g m on professionally laid wood flooring The floor must be sanded thoroughly down to the wood dry and free from oil fat wax silicones and sanding dust Ground treatment Final sanding of wood floor with grain size 100 dust removal Shake Hesse WOOD FILL well before processing Add very fine wooden sanding powder grain 80 until the mass is pasty and can be applied with a putty knife The sanding powder of the edges is working best The finer the sanding powder the better is the bonding in the gaps
120. t may not be covered with foils or carpets before having attained the final hardness Application example Planed timber floor boards oak coloured Wood sanding grain size 150 Coating 2 x 20 30 g m Hesse NATURAL COLOUR OIL OB 83 700 putty and pad in immediately afterwards Intermediate drying for at least 16 h 20 C Accessible after 24 h 20 C Full load capacity after 10 d 20 C Technical data Delivery Condition liquid Shade in many attractive colours colour shade varies according to type of wood Supply viscosity 30 50 s according to colour tone DIN 4 mm 20 C Non volatile 50 60 components Density 0 980 1 03 kg l at 20 C Flashpoint OT Storage stability 1 year in the closed original container Storage temperature 15 25 C Further information on storage Due to the high reactivity skin formation may occur please remove skin before stirring Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Manual puttying putty or roll thinly immediately thereafter pad grind in Larger surfaces should be treated by two people Manual application Sand in with sanding fleece and remove surplus with cotton cloths Special advice Materials of the same series can be mixed with each other Brightening possible with OE 83 2 Shade adjustments possible with OP 80 3 Material is not suitable
121. th almost all PUR lacquers Application example Table beech natural mat Wood sanding grain size 120 180 Coating 2 x 100 150 g m Hesse PUR Multicoat lacquer DE 45324 Mixture 10 1 PUR Hardener DR 4071 Intermediate drying for at least 4 h 20 C rather 16 h 20 C Intermediate sanding grain size 280 320 packable after drying for at least 16 h 20 C Gloss level 00 02 Gloss 125 um dull mat 08 12 Gloss 125 um mat 18 22 Gloss 125 um semi mat 47 53 Gloss 125 um silky gloss DIN 67530 60 application on photo cardboard Technical data Delivery Condition Liquid Shade colourless Supply viscosity 33 35s DIN 4 mm 20 C Non volatile 24 26 components Density 0 942 0 947 kg at 20 C Flashpoint TE Storage stability 1 year in the closed original container Storage temperature 16 25 C Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Application method Spraying if necessary add thinner Air spraying cup gun Spray nozzle size 1 8 2mm Spray pressure 2 5 3 5 bar Airless spraying Spray nozzle size 0 23 0 28 mm Spray pressure 100 150 bar Airless air assisted Spray nozzle size 0 23 0 28 mm Spray pressure 60 100 bar Atomizing pressure 1 5 2 5 bar Brush Roll applicable with addition of 5 10 DV 4909 Special advice Do not use dull mat adjustment as multicoat lacquer but as non recurring
122. tice By using common sense and careful planning the floor of your nightmares can be avoided Here is a list of the most important facts in advance Handling of the coating materials Storage All parquet coating materials should be stored in well sealed original containers at 20 C Since this is not always possible storage must be maintained at least between 15 25 C so that the materials are not exposed to a large variation in temperature Rooms without direct sunlight are particularly suitable Special hydro lacquer materials must be protected from frost Processing To a large degree the storage of the material has a direct influence on its use in production The ambient temperatures during processing are therefore particularly important for subse quent coating processes Care must be taken to ensure that there are no great variations in temperature and if possible that the temperature remains between 18 20 C Humidity must also be considered with hydro sealers Too high delays drying too low accelerates Draught should also be avoided during the drying phase In extreme cases this can lead to blotching and cracking of the sealant layers Direct sunlight on the freshly treated surface should also be avoided If these parameters are not strictly adhered to a professional should postpone the coating until the environmental in which they work cannot directly influence the result of their efforts at very high temperatures it is
123. tion Work This applies to the fitting of parquet flooring and not the actual surface treatment of the wood of particular importance is the very often neglected Part 3 1 4 which states that The contractor has to pass on written care instructions to the client Failure to comply with this rule may lead to severe consequences for the parquet layer Standards Certificates Technical Regulations for Hazardous Substances TRGS 617 DIBt Due to the importance of health and safety to consumers and manufacturers the Ger man Institute for Building Technology DIBt demands that all parquet and wooden floo ring is subject to DIN EN 14342 hich states that all newly installed parquet flooring must be assessed by a independent building inspectorate Consequently as from 2011 only parquet that bears official approval by DIBt may be used The focus is on the emission of harmful chemicals from the products in short VOC Volatile Organic Compounds In addition the formulations of all materials used are disclosed and the health aspects evaluated by DIBt Renovation of existing floors is not effected DIBt approved coating materials are labelled with the U mark approval number and the words emission tested building product according to DIBt principles With this approval the DIBt grants the cove ted authorisation stating positive test results from the required accredited testing insti tutes The fundamental fire beh
124. uctions in accordance with DIN 18356 Clean the parquet slightly wettish with soft cloth Not wet Use only neutral detergents without silicone ammonium chloride and scrubbing agents Regular cleaning and care with Hesse PROTECT CLEANER PR 90 with Carnauba wax and Hesse INTENSIVE CLEANER PR 91 increases the useful life of the finish Ordering hints mat OE 88 2 Container sizes 11 Hardener OR 87 Container sizes 0 25 hardener Productivity per litre 25 33 m Thinner OV 89 Post treatment care PR 90 PR 91 products Giscode KH1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and condi tions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 PROTECT OIL 39 HessellllLisnas COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de 40 PROTECT CLEANER Hesse PROTECT CLEANER PR 90 L2 elllfuigna Hess COATINGS He
125. umulation therefore let these materials air dry while spread out and then dispose them properly Also wood dusts soaked in oil tend to self ignition please do not dispose these in closed containers Please make a test coating under practical working conditions Ordering hints Order no OB 84 77 white Container sizes 2 51 Hardener OR 87 Container sizes 0 25 l hardener Productivity per litre 25 33 m Thinner OV 89 Giscode KH1 General advice exclusion Our technical information is constantly updated according to the state of the art and the applica ble legal requirements You can find the respec tively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consul tatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force can not be deduced from the information indicated here Also please refer to our terms and con ditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 Hesse additive HZ 75 slide blocking Hesse Hydro Additive Fields of application Additive for increasing slide blocking according to BGR 181 DIN 51130 Dosage 10 into suitable Hydro Finishes Handling guidelines Add 10 of the paste into a suitable coating material and dispense it homogenously by intensive stirring shaking
126. ut nevertheless realize the desired stain character Emission tested building product according to DIBT rules German Institute for constructional engineering associated with OE 82 OE 83 OB 83 PARQUET COLOUR TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds EJ E General technical approval surface coating for parquets and wooden floors permit no Z 15710 112 Emission tested building product according to DIBT rules German Institute for constructional engineering associated with OE 82 OE 83 OB 83 DIN 53160 Part 1 and Part 2 resistance against saliva and sweat simulation No discolouration Level 5 The indicated test standards and resistance properties are fulfilled when materials are properly processed Status 11 04 13 Fields of application for parquet and wooden floors with subsequent sealing finish If necessary critical kinds of wood may be pre treated with colorless WPB 1000 by rolling spraying and may be worked in by one disc machine with white pad until the surface is dry Thus different levels of rough wood can be denibbed and a more uniform staining picture can be achieved with colored stains Handling guidelines Non recurring application with 50 80 g m on professionally laid wood flooring Ground treatment The surfa
127. ve the general guidelines for processing Drying Good ventilation necessary Sandable and recoatable after 16 h 20 C Accessibility after 24 h 20 C Complete hardening 10 14 d 20 C Recoatable Possible with itself or with suitable colourless materials see under Special Guidelines The parquet may not be covered with foils or carpets before having attained the final hardness 99 weeks in the closed original container Storage temperature 15 25 C Further information on storage Due to the high reactivity skin formation may occur please remove skin before stirring Storage class according to the Occupation Safety Ordinance Flammable Please note actual Safety Data Sheet Storage stability Application method Brush Roll with lint free rollers i e of shorthair mohair During the first use remove loose hairs with adhesive tape Dilute the first coat with 10 20 OV 5100 then level thinly andf then immediately pad in Larger surfaces should be treated by two people Rapid rolling prevents stop lines work in the direction of the wood grain Special advice For surfaces with natural look spare coating better use OE 83 gloss Material is not suitable for woods which are prone to bluing in wet rooms The material s properties were tested on standard timbers such as oak beech etc When using on other woods please test adhesion before use After sufficient drying and proper sanding recoatable w
128. vely current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consultatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the information indicated here Also please refer to our terms and conditions of business The Safety Data Sheet will be provided in accordance with EC Ordinance 1907 2006 18 PURA NATURA Hesse PURA NATURA HDE 52 0 Mm Dx Two component abrasion resistant viscoplastic brightening dull mat light fast with very good stability and resistance to foot tracks and typical household chemicals The natural impression of the wood remains unchanged Multicoat lacquer for priming and top coating for light wood Emission tested building product according to DIBT rules German Institute for constructional engineering ell ina Hess COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de Mixture ratio 10 1 by volume with Hesse PURA NATURA hardener HDR 72 on PURA NATURA TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds nMP Fulfils DIN EN 71 3 2002 11 safety of children s toys ChemVOC FarbV Decopaint fahig Pro
129. were produced with Hesse Parquet Hydro finishes UV Oil Oil UVand Oxi Oil systems The surface will be mat refreshed by using Hesse AQUA REFRESHER Scratchy and dull surfaces become attractive again and the further fading is retarded _ hh i Hh _ AQUA REFRESHER MATT TOX RESPONS Formulation free of wood preservatives toxic heavy metals formaldehyde phthalate based plasticizers CMR materials Classes 1 2 volatile halogen organic compounds Decopaint f hig Product fulfills the specifications of the Directive on Dyes and Lacquers containing solvents ChemVOCFarbV from 23 12 2004 Decopaint guideline Status 19 11 13 Fields of application For panel and floor coating not suitable for mirrors marble or non slip surfaces Handling guidelines Single coat application Ground treatment Remove loose dirt by vacuum cleaner or fine broom For base cleaning of water soluble pollutions add Hesse INTENSIVE CLEANER PR 91 into the cleaning water and clean the floor Subsequently wipe the surface and allow it to dry properly Remove extreme pollutions with Hesse Remover OS 5600 Allow the surface to dry sufficiently The material should be diluted 1 1 with water before use The concentration of the material depends on the severity of wear marks on the parquet surface and can be adjusted accordingly The more affected the surface is the higher should be the concentration of
130. wood ingredients such as those from ash and tannic acids from woods like e g oak may cause colour changes and discolorations in the coating Of UV materials Always shield opened containers from light cover Close tightly after use Regularly clean lamps and reflectors with a soft lint free cloth COATINGS Hesse GmbH amp Co KG Warendorfer Str 21 D 59075 Hamm www hesse lignal de and CV 570 Only touch the lamps with cotton gloves Pay attention to the hours of operation for the lamps and change them according to the manufacturer s recommendation Please make a test coating under practical working conditions Ordering hints mat HUE 86063 semi gloss HUE 86064 glossy HUE 86068 Container sizes 5 251 Productivity per litre 6 8 m Giscode W 1 Thinner H2O max 5 Cleaning thinner H2O Cleaning thinner for Hesse CLEANING removal of dried AGENT DV 9 NV lacquer rests 3920 ZD 82 General advice exclusion Our technical information is constantly upda ted according to the state of the art and the applicable legal requirements You can find the respectively current version on the Internet or contact the customer service representative in your area The specifications on this Data Sheet are consultatory in character they are based on the best of our knowledge and careful analyses according to the current state of the art A legal force cannot be deduced from the information indicated here Also please refer to our term
131. y hardened Pressure marks caused by moving in furniture too early Sliding marks caused by chair slides even caused by plasticizer migration from plastic slides or from anti slip carpet under lays Solution Sufficient hardening of the parquet lacquer see technical info use felt pads for moveable furniture Correction Sand the lacquer surface completely until the imprints cannot be seen and re lacquer Mat spots Cause The lacquer has been applied too thick in some areas Afterwards raised spots seem duller after sanding Possible draught during the drying pe riod of the lacquer Possibly sealant not sufficiently stirred or with 2C systems the hardener not evenly poured Solution Apply mat sealing evenly not too thick and without much pressure when sanding Correction Sand whole floor until the mat spots have gone and apply new lacquer layer Discolouration Cause Spotting due to alkalinity of the aqueous coating Solution Use special primer Do not pour aqueous lacquer direct on to the wood Apply with brush or roller out of the lacquer container Avoid puddle formation Correction Sand whole floor down to the wood and reseal 2 Spotting adhesion problems Cause Undercoat sealant has been too long in one spot before being ap plied e g pouring out of the contai ner directly onto the wood Or primer is incompatible with covering lacquer During refurbishment old coating not c

Parquet catalogue

Contents

Download Pdf Manuals

Related Search

Related Contents