INSTRUCTION MANUAL OF IW001-WF-JJY
Contents
1. INSTRUCTION MANUAL WT 498 TIME ALARM ICON CPF SET r s Gy r Tu anp au 5 WAVE a z S MNE 30 fc its ALM SET ON OFF MONTH DATE DCF SIGNAL ICON DAY OF WEEK TEMPERATURE SNOOZE ICON g C oC on TRE 5 D E RESET SNOOZE LIGHT LIGHT SENSOR INSTALLATION BY AC ADAPTOR For best reception of radio controlled signal keep your clock close to a window and away from metal surfaces electrical appliances and magnetic fields Plug the AC DC adaptor to an AC household outlet then plug the DC jack to the back of the clock Your clock is ready to work for you INSTALLATION BY BATTERIES 1 Slide open the battery cover at the bottom of your unit 2 Insert 3 x AAA batteries into the battery compartment by observing the correct polarity signs inside the battery compartment 3 Replace the battery cover 4 In case it is too bright in night time please only use by batteries without adaptor When only batteries are being used the always on backlight is off Press SNOOZE LIGHT will light up the LCD for few seconds to view time if need If user unplugs the DC jack the clock will stop to work and no time alarm Please remember to put batteries in the clock if user wants to unplug it DCF SINGAL RECEPTION AND SIGNAL INDICATOR After your clock is pow2. ep again in 5 minutes 2 To stop the alarm press ALM SET ON OFF once the alarm beep will stop and the a icon become static alarm will beep again same time next day Alarm Duration 2 minutes AUTOMATIC LIGHT SENSOR Your clock is equipped with an automatic light sensor on top right next to the snooze light button The brightness of backlight will be adjusted to lower level when your room environment is dim Please keep your clock at least 1 foot distance away from any objects on top TO DISPLAY TEMPERATURE IN C OR F Simply press C F to display temperature in C or F TROUBLE SHOOTING In case your clock shows irrelevant information or digits it maybe affected by electrostatic discharge or interferences from other devices Press the RESET button on the top of your clock Your clock will be reset to default setting of time and calendar and it will start to receive radio controlled time signal again CARE OF YOUR RADIO CONTROLLED CLOCK 1 Do not expose the unit to extreme temperature water or direct sunlight 2 Avoid contact with any corrosive materials 3 Do not subject the unit to excessive force dust or humidity 4 Do not open the inner back case or tamper with any components of this unit SPECIFICATIONS Indoor Temp Range 10 C to 50 C 14 2 F to 122 F Temperature Resolution 0 1 C Alarm Duration 2 minutes
3. ered up it starts to receive DCF signal The A icon flashes only icon flashing icon flashing icon becomes static icon disappear Weak or no DCF signal Receiving strong DCF signal Successful Reception Failed Reception gt gt Automatic reception and Manual Reception Your clock starts automatic reception everyday at 1 00 2 00 3 00 If it fails to receive the DCF time signal at 3 00 it will start reception at 4 00 If it fails again it will start reception at 5 00 If it fails again it will start automatic reception at 1 00 again next day Manual reception simply press WAVE button once to start manual reception Press and hold 2 seconds to stop manual reception Remark when your clock is receiving radio controlled time signal all buttons except the snooze light button do not work TO SET CALENDAR 12 24 TIME AND TIME 1 Press and hold SET for 2 seconds time digits change to 24 Hr and flash press to select 12 Hr time format or 24 Hr time format 2 Then press SET once again time digits change to 00 and flash Press button to select time zone 00 GMT 1 hour e g Germany 01 GMT 2 hours e g Finland 01 GMT 00 hour e g U K 3 Then press SET once again hour digits flash Press button to set hour 4 Then press SET once again minute digits flash Press button to set minute 4 Then press SET once again time d
4. igits change to year 2009 and flash Press to set the year 5 Then press SET once again month digits flash Press button to set month 6 Then press SET once again date digits flash Press button to set date 7 Then press SET once again day of week digits flash Press button to select the language of day of week EN English GE German FR French IT Italian NE Dutch ES Spanish DA Danish 8 Press SET to return to normal mode or it will return to normal mode in around 30 seconds if no press of any other buttons TO SET ALARM TIME Press and hold ALM SET ON OFF once time digits change to alarm time digits 0 00 AL and hour digits flash Then press to set your desired hours of alarm time Press ALM SET ON OFF once alarm minute digits flash Press to set your desired minutes of alarm time Press ALM SET ON OFF once to return to normal mode or it will return to normal mode in around 30 seconds if no further press of any other buttons TO TURN ON OR OFF YOUR ALARM Press ALM SET On Off once to turn on or off the daily alarm When the alarm function is turned on the a icon appears between the hour and minute digits TO USE SNOOZE ALARM When time reaches your set alarm time your clock will give beep sound to wake you up The a icon will flash 1 Press SNOOZE on the top once to stop the alarm temporarily the Bell and Zz icon keep flashing The alarm will be
Download Pdf Manuals
Related Search