Home

User Manual 4 CH H.264 Multiplex DVR

image

Contents

1. 2 Item Description Sensor Detection Check the box to Enable Disable sensor detection for all channels Sensor Popup Check the box to Enable Disable popup screen function for all channels When Sensor is detected in LIVE mode the detected channel image will pop up in full screen display Sensor Polarity Click or press to select between HIGH LOW voltage for triggering sensor detection or OFF to turn off polarity for each channel Low Polarity Sensor has not been triggered When connected sensor will be turned on High Polarity Sensor has been triggered When connected sensor status will be turned off Off Sensor is deactivated and will not be turned on off 5 4 Schedule Setup m 1 mm lotion 00 00 24 00 Hie 0000 24 00 0000 24 00 E 0000 2400 00 00 24 00 00 00 24 00 0000 24 00 0000 24 00 00 00 24 00 fAs 0000 24 00 MENU OK ESC Carce Apart from manual recording you can also setup the recording time by weeks and schedule recordings include normal motion detection and sensor detection Item Description Pade Click or press to select Page Each page provides 10 schedules for setup 5 pages in total Holiday Setup Enter to setup holiday maximum up to 50 days View Event Setup View Normal Motion Sensor Setup 19 5 4 1 Schdule Record Setup Schedule Recor
2. I slow playback opeed 1 2x 1 4 1 8 1 16x v W playback opeed 1 2x 1 4 1 8 1 16x 8 Playback channel by channel with snap shot display 3 6 PTZ Mode xem S ie lc ZOOM Focus RS m Under LIVE mode PTZ icon EJ will appear on the upper left of the screen or be re located on any place of your screen by dragging the mouse PTZ Remote Controller Control SLOW Move PTZ up uoo zama save a preset location PRESET NUMBER Press PRESET and a number key DVR will save the current location To go to a preset location PLAY NUMBER Press PLAY and a number key DVR will move to the preset location ZOOM Set current PTZ location as the start of the line scan PIP Set current PTZ location as the start of the line scan 10 PTZ Quick Function Icon 7000000 eememamea 0000000000 TOUR icon click to activate preset tour Same as PIP Set current PTZ location as the starting point of the line scan Same as FREEZE Activate line scan 00000000000 as Same as FREEZE Activate 00000000000 Activate line scan Same as ZOOM Set current PTZ location as the ending point of the line scan To move PTZ in 360 ZOOM PTZ zoom in or PTZ zoom out FOCUS PTZ focus in or PTZ focus out IRIS PTZ IRIS open or PTZ IRIS close
3. PELCO D and KND PTZ ID Click or press 21 to set up PTZ ID The valid ID value is from 1 to 64 Baud Rate Select Baud Rate for PTZ from 2400 4800 9600 5 9 System Setup 9 26 2008 03 57 25 DVR Name H264 DVR DVR Location 410M Language English Auto Seq Interval Seconds E Remote ID 6 Display Setup Date Time Setup Buzzer 8 Relay Setup f Spot Setup MENU OK ESC Cance OK Cancel Item Description DVR Name The name of DVR will be shown when users login from remote access DVR Location The location of DVR will be shown when users login from remote access Click or press W to select OSD language Auto Seq Interval Click or press 216 to set up duration time in seconds for the interval Seconds between channels under Auto Seq mode 26 5 9 1 Display Setup 9 26 2008 03 19 0 1PM 05 DYR Status Date Time Channel Name Border Set White MENU OK Item Description 000000000000 Set up color of border in LIVE PLAYBACK mode black dark grey Border Set l light grey and white 5 9 2 Date Time Setup IR 9 26 2008 03 19 35PM Hour Format 08 46 05 Date Format 113 1 2008 Date Time Position Top Change Date amp Time Time Zone Setup linternet Time Setup MENU A IESG Cancel Item Description 27 5 9 2 1 Change Date 8 Time Users are allo
4. 80 5 7 3 DDNS Setup 9126 2008 03 09 24P M DDNS SETUP Enable DDNS DDNS Server EL Host play i dvr net User Name 1000001 Password 123455 IMENU ESC Description DDNS Server Enter the registered SMTP Server Password Enter password 24 5 7 4 Setup 1 MAIL SETUP Enable E mail Hotificatian SMTP Server com tr User Password Sender E mail ESSI Ee Recelyar E mall Steven ying l2atchine com Trigger Events are el E mail can be used as a form of notification when an event occurs VLOSS MOTION and SENSOR Description Enter to select events to send out E mail notifications when below Trigger Event circumstances happen Motion Sensor and Vloss Video Loss 5 8 PTZ amp RS 485 Setup 41412009 06 29 41 PTZ amp RS 485 SETUP i CEN Enable PTZ Protocol 7 PTZ 10 Baud Rate 9600 R5 485 10 5 485 Baud Rate 9500 Pratocol Li Lin MENU OK ESC Cancel OK The DVR allows users to control PTZ functions of your camera To enable PTZ function the 485 cable should be connected to the RS 485 port of DVR 25 Description Enable PTZ Click the box to Enable Disable PTZ function for each channel Protocol Set up the protocol of PTZ cam The supported protocol are PELCO P
5. DING IW GS WU SIM D MID UI IM DM M EE 22 ood d osos ROM eM 25 26 5 10 Utility Setup 000 00 0 00 00 30 cioe EFE 31 Chapter 6 SEARCH BACK UP 32 61S CALCM SC LUD Mec E 32 heaton iti mesh Riv it 35 Chapter 7 9PBEOIFIGATION 36 Chapter 8 NETWORK SURVEILLANCE cccccsssssccsssursesccursureceusursesccursareceusursaseeures 38 8 1 AP Software Installation and 38 8 2 AP Software Operation 39 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information herein Chapter 1 FEATURES H 264 compression ideal for saving HDD space Real time live display Up to 120FPS 360x240 recording NTSC Live display record backup playback and network access at the same time Control methods front panel USB mouse IR remote controller and client viewer Intuitive GUI for easy configuration and menu driven operation 1 channel audio recording and playback Supports 1 SATA HDDs Pan Tilt Zoom camera control Data backup USB devices and network remote site Event
6. OSD Turn On Off the Screen Display Enable Disable double screen size display C7 ZOOM Use Directional button to navigate the screen display and press Enter button to oven switch channels 8 Enable Disable Menu 59A Up Directional Button MEE Slow Forward Playback Speed 1 2x 1 4 1 8x 1 16x 2 0 ESC Exit Button 44 Left Directional Button Fast Rewind Playback Speed 2x 4x 8x 16x 32x 64x 2 12 ENTER MODE Switch to Single Screen Quad Screen Display C gt Right Directional Button Fast Forward Playback Speed 2x 4x 8x 16x 32x 64x Down Directional Button VEN Enter the SEARCH menu Use Up Down Directional Button to navigate the menu item press Enter button to enter menu item 3417 IRIS PTZ lris Open 0 25 CAMERA Camera Select Numeric Button Press 10 button to select channels Switch to 13 Channel Display 4 CH doesn t support this function Switch to 16 Channel Display 4 CH doesn t support this function Lens PreSet Point Setup 2 31 PRESET Press PRESET button 2 numeric numbers to save current lens location PLAY Numeric Number to move lens to preset point 5 322 TOUR Activate PTZ Preset Tour 0 33 Start Stop PTZ Control 3 4 Mouse Control Live Mode Single Channel Display Move the cursor to the desired channel and double left click Change from Single Channel to Multi ChannelDisplay Mouse Menu
7. _ m M acus 00 Wie oo areal 26 XJ T i Click date to display recording time of that specific date with time bar You can change time hour minute second or click on a specific time of time bar by mouse then press YES DVR will playback the selected recording data 34 6 2 Backup Setup User can back up any segment of recorded data in a specified time frame To do so connect a USB to the DVR The format of backup file is RF file and can be played by DVRemoteDesktop exe or ICMS js BACKUP Fram 99 00 00 FOGE Osho TES E Device USB Flash Drive Free Space 1 44 Refresh Space Item Description From Backup file starting time tne avaiable space _ Start backup operation Be sure to calculate the size of backup file BEFORE a operating backup NOTE Do not unplug the USB device or turn off the DVR during the backup process to avoid unrecoverable error When backup is completed you need to re plug in order to insure proper function 35 Chapter 7 SPECIFICATION VIDEO SYSTEM NTSC PAL Selectable INPUT 4CH BNC VIDEO VIDEO OUTPUT 1CH BNC SPOT OUTPUT 1CH BNC OUTPUT Optional INPUT 1CH RCA AUDIO OUTPUT 1CH RCA SENSOR 4 Inputs 1 Outputs TERMINAL RS 485 INTERFACE Pa
8. image will popup in full screen display 1234 You can setup independently for each channel Selected Channel Turn Check the box to Enable Disable motion detection for each channel Obiect Size Drag the white bar or press 219 to set up Object Size from value 1 to 15 each channel The lower value you the higher sensitivity it will be Drag the white bar or press 218 to set up Sensitivity from value 1 to 15 for Sensitivit d each channel The lower value you set the higher sensitivity it will be Motion Area Setup Enter to setup motion detection area 5 3 1 1 Motion Area Setup JLOCKIZOOM Select All Deselect All STATUS ENTER Ag lie There are 16x12 partitions in motion detection area Under initializing status motion detection area is in the entire screen Red colored area is detected yet the undetected area is transparent It is purple while network is connected Item Description LOCK ZOOM Press LOCK ZOOM to select the entire screen as detection area MUTE PIP Press MUTE PIP to deselect the entire screen as detection area STATUS Switch between select and deselect for cursor dragging function ENTER Press to activate selected area with assigned status MENU Press to save the setup and leave ESC Press to cancel the setup and leave 5 3 2 Sensor Setup 1 912212008 16 24 52 SENSOR SETUP M Sensor Detection Sensor Popup MENU
9. password is 123456 Other related setup about user account and password please refer to 5 6 Account Setup The server h264 i dvr net at requires username and Warning 7 This server is requesting that your username and be sent in an insecure manner basic authentication decem a secure connection User name Remember my password 38 Step 3 You ve logged into the DVR 41112009 05 20 36 8 2 Software Operation User friendly operation DVR remote interface provides the DVR with same local client interface 39 8 2 1 Remote Record 41112009 E 06 25 41 M y Click Record icon to select between 3 recording options Record On Off Record to Local Screen Snapshot F2 Record switch can activate DVR client to record record to local client can be backed up onto the PC may also use snapshot to capture video image onto the PC 8 2 2 Lock 41112009 Click Lock icon to lock remote site function and to unlock account and password must be entered all over again 40 8 2 3 Full Screen 41112008 06 27 23 EAE E 01 Click Full Screen icon to enlarge the screen to full screen display 8 2 4 Camera Name 4 1 2009 06 25 19 41112009 CAMERA SETUP poan Mask Brightness Contrast saturation Hue Name Volume A variety of languages can be used to setup the PC client camera names and simultaneously changes t
10. the quality and frame rate for each channel under normal recording and event recording type 16 5 2 1 Quality amp Frame Rate Setup 0000 41112009 06 28 32 QUALITY 8 FRAMERATE SETUP Resolution 720 240 MENU ESC Cancel Description Choose record resolution this value will be used by all channels Record Type You can setup quality and FPS separately for record type Ne Check uncheck the box will enable disable recording of that channel Quality Choose from Lowest Low Normal High Highest FPS o Choose recording frame rate 5 3 Event Setup 16 11 04 Alarm Ouration Secondei Motion Setup Sencar Setup WENU Item Description Alarm Duration Seconds Set up alarm duration in seconds can not be set to 0 seconds Drag the white bar or press 219 to adjust value Motion Setup Enter to set up motion detection Sensor Setup Enter to set up sensor detection 17 5 3 1 Motion Setup 1 R 9 26 2008 02 37 54 MOTION SETUP Motion Detection Motion Popup 1 2 l3 4 F Selected Channel Turn Object Size 7 Sensitivity 7 Motion Area Setup MENU OK ESG Carce Item Description Motion Detection Check the box to Enable Disable Motion Detection for all channels Check the box to Enable Disable popup screen function for all channels Motion Popup When motion is detected in LIVE mode the detected channel
11. triggered with email notification motion detection alarm and video loss Support AP on your PC end for remote operation Multi language OSD Chapter 2 PACKING DETAIL C Ooo O C BIW 5 Power Cord gt lt 8 5 DVR Client Viewer Software CD User Manual Power Cord Battery SATA Cord HDD Screws 3 User Manual 6 Power Adapter 4444 9 HDD Screws CONTENTS 4 Remote Controller 7 Battery Remote Controller Power Adapter Chapter 3 LOCATION AND CONTROL 3 1 Front Panel Controls 1 2 3 4 5 6 5 PIP ZOOM AUTO REC POWER ys SER DL Ll Lo ly 16 15 14 13 12 11 10 9 8 Mem Description ESC BACKUP Exit various functions and menu screen Enter backup seletion menu SEARCH Enter search menu screen use Up Down button to navigate Press ENTER to access selected item Turn on picture in picture format use Up Down button to navigate Press ENTER to access selected item Enable Disable double screen size display Press ENTER to switch channels Enable auto mode to skip channels Press MENU to disable auto mode LED DISPLAY REC DVR Recording LED DISPLAY POWER DVR Power is on USB 2 0 The USB 2 0 port can be used to connect USB mouse and USB storage device Start Stop recording PLAY Start playing back Enter menu mode use Up D
12. 4 H 264 Multiplex DVR User Manual VER 1 0 P N R040182A 1 _ CAUTION _ RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of unprotected Dangerous voltage within the product s enclosure that may be strong enough to cause a risk of electric shock This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE NOTE This equipment has been tested and found to comply with the limits for a class digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at ones own expense Disposal of Old Electrical amp Elec
13. BUZZER Enable Disable operation when alarm is triggered for sensor motion and vloss Video Loss ALARM RELAY Enable Disable the signal to be sent to the RELAY OUT blocks when the alarm is triggered for sensor motion and vloss 5 9 4 Spot Setup Description 1 18 05 23 SPOT SETUP IriLetval deconds Skip ideo Leas Channel DVR has two modes of video output one is the main video output the other is spot video output SPOT setup is for controlling orders of channels that the system cycles through in SPOT mode User can monitor every channel in the SPOT mode Description Channels display in spot for three different modes MANUAL Select channels to display manually select channels will SPOT MODE be transfered to the SPOT monitor SEQUENCE Auto sequence for all channels in order EVENT Display channels with event occurred The duration interval time between channels is in seconds under SPOT Interval Seconds mode can not be set to 0 seconds Skip Video Loss Channel Whether to skip channels without video signal 29 5 10 Utility Setup 900 i 41112009 06 30 01 UTILITIES Initialization USE Initialization System Recovery Reset System Events Copy Setup te USB Download Setup from USB Upgrade Description HDD Initialization Select to enter hard disk initialization menu Please stop recordi
14. Below functions needs support from specific PTZ Please check the user manual of your PTZ manufacturer for detail wr as ro 5 11 Chapter 4 INSTALLATION 4 1 System Configuration n M 1 AUDIO INPUT VGA OUTPUT OPTION CAMERA 1 4 MAIN MON ITOR OUTPUT NTSC PAL SWITCH POWER SUPPLY 4 I q NETWORK AUDIO OUTPUT CONNECTION SPOT MONITOR UTPUT 12 4 2 Hard Disk Installation Step 1 Remove the 3 screws from DVR as cycled below PIC 1 PIC 1 Step 2 Remove the front cover from DVR as indicated by the arrow PIC 2 PIC 2 Step 3 Place the HDD on the HDD plate and connect the power and the SATA cables PIC 3 PIC 3 13 Step 4 Screw the bottom of the DVR as indicated as cycled PIC 4 14 Chapter 5 BASIC OPERATION and MENU SETUP 5 1 Main Menu Setup USER 4 O EE lt i mier To enter the main menu and setup the DVR please log in account and enter user password The default password of the administrator is 123456 Please refer to Account Setup for related setup of other log in users Menu Mouse Control gt Switch between capital and small letters 712 Switch between numbers and letters Press to cancel the setup and re choose the login account x Delete the las
15. Mode Enter Menu setup Right click Select Enter Left click Return to Previous Page Right click Mouse Graphic Icons Resting the cursor on this icon will bring up the four Main Menu Search Backup PTZ menu icons MAIN MENU SEARCH SETUP BACKUP PTZ CONTROL Resting the cursor on this icon will bring up five PAUSE PIP ZOOM AUTO SEQ LOCK display icons PAUSE to pause LIVE image PIP picture in picture ZOOM double the screen size AUTO sequence LOCK activate the key lock Mouse GUI Hints and Tips OON _ oc 2 OON ome BB Video loss detected on the channel USB device detected Timer recording is on Red Timer is set and recording has been started White Timer is set but recording has not yet been started AUTO SEQ is on FREZZE i FREZZEison screenisfrozen 00 Oh Screen is FREZZEison screenisfrozen 00 PTZ control is on 3 5 Playback Mode Under the LIVE mode the graphical icon will show up on the upper center of the screen and the operation panel see below picture will show up at right lower corner of the screen You can drag the panel by mouse to place it on any location of your screen Playback Quick Function Icon Press 44 4 button to Fast Rewind Speed 2x 4x 8x 16x 32x 64x Press gt gt gt button to Fast Forward Speed 2x 4x 8x 16x 32x 64x Press PLAY button to Play Pause Playback
16. ation of your camera from value 1 to 255 The default value is 128 Drag the white bar or press 2 to adjust Hue of your camera from value 1 to 255 The default value is 128 This function is ineffective in PAL system Select to adjust audio volume for CH1 to CH 4 under LIVE mode and Volume recording mode NOTE Network LIVE videos are unable to be switched off when applying Mask function To avoid network LIVE videos please use User permission mask playback features Administrator has no such permissions Saturation 5 6 Account Setup 9 26 2008 02 42 4 ACCOUNT SETUP Auto Lock User List Ror Unies io UserName mi USERI Sei P m2 USER2 M3 USER3 Parmirsisne M4 USER4 Permissions Change Admin Passvrord MENU ESC Cancel Account Setup menu is used to provide role based permission independently for each user maximum of 4 users to access the DVR over network The default admin account is admin and password is 123456 Description After one minute without any action the DVR will switch to L VE mode automatically Auto lock can function differently according to the setting below EIE Auto Logout Lock Auto Lock Keylck Keylck No Check to activate the user s account Enter to set up password for each user Password must be at least 8 Password characters including letters and numbers Resetting Adiminstartor password
17. d Normal Schedule Motion Schedule Sensor Start Time 00 00 End Time 24 00 Sunday Monday Tuesday Wednesday Thursday Friday Saturday Holiday OK Click on the time icon on the left side The setup menu will be displayed You can have detail setup by dates time and event 5 4 2 Holiday Setup 9 26 2008 02 34 07PM HOLIDAY SETUP 0 50 1 3 14 115 116 18 119 1110 141 12 1113 114 1115 1116 1171118 119 1120 1121 122 2324125 2728 129 3 14 15 16 1 10 141 2 113 114 1115 16 18 113 120 21 22 3 25 126 29 2 13 114 5 116 7 10 411 March 121113 1141115 25 26 MENU OK 5 Cancel Since holidays are different between countries and regions you can setup holiday of your location accordingly Maximum Setup 50 5 5 Camera Setup 1 IR 9 26 2008 02 36 02 CAMERA SETUP Mask Brightness Contrast Saturation GK ESC Cance 20 Description 1234 You can setup independently for each channel Mask Check the box to Enable Disable mask function for LIVE mode Drag white bar or press 212 to adjust Brightness of your camera from Pgudiess value 1 to 255 The default value is 128 Contrast Drag the white bar or press 2 to adjust Contrast of your camera from value 1 to 255 The default value is 128 Drag the white bar or press 21 to adjust Satur
18. ge of space used on HDD Shows HDD status USING means the HDD is now used for recording GOOD BAD means the HDD has a known unknown format for the DVR Note Please initialize your newly installed HDD before using it otherwise it can be recognized as BAD by the DVR The latest format time of HDD 31 Chapter 6 SEARCH amp BACKUP 6 1 Search Setup 9 26 2008 03 37 48 SEARCH SETUP Event Search Time Search 2 18525 6 EIC Description Event Search Press to enter event search menu Time Search Press to enter time search menu Select Playback Channels Check the desired channels to playback O uncheck channels to 1 4 show LIVE video images 6 1 1 Event Search 19 01 49 EVENT SEARCH Criteria Page 4 i EXE Trie rne 3 15 09 17 Power on 20061051239 15 09 20 Wideo Lors CHG eA 1509120 Wideo Legs CHO2 2008024 45 08 20 Wideo Less 4 ERE ERU vides Leas 2008105129 16 02 36 On ENOR SIZI 15 02 37 Widen CHO 15 02 1T7 Video Los H EE EST Clean The DVR automatically records events with type time and channel information included If there is recording data for an event a yellow signal gt icon will be shown on the left side of time information Rest your cursor under the line and press enter or left click your mouse to playback the recording data 32 Descr
19. he display of the local client DVR 8 2 5 Remote Site Backup 4112009 06 26 36 2003 04 02 08 00 00 2009 04 02 08 47 05 Refresh Required Space Calculate Select backup function to backup the data to PC 41
20. iption Setup conditions of the event search function Date Time Date time when the event occurred Event type defined as following VLOSS Video Loss MOTION Motion Detected SENSOR Sensor Detected REMOTE IN User log in over the network REMOTE OUT User log out over the network POWERON System Rebooting KEY LOCK System key is locked KEY UNLOCK System key is unlocked HDD FULL HDD is FULL The channel where the event occurred 6 1 1 1 Criteria Setup for Event Search Event Type Fron 2000 01 01 00 00 00 2000 01 01 00 00 00 Motion Sensor Video Loss Remote Login Remote Logout Power On Key Lock Key Unicok HDD Full 01 CHO2 CH03 04 The amount of events can be numerous Therefore you can facilitate event sorting setting up criteria Setup start time and end time for each event search then search result will be limited to this specific period of time Only events and channels that are checked will be sorted in event search as well 33 6 1 2 Time Search TIME SEARCH you can search for a specific time of the recording data to playback Dates with recording are shown by data marked with a red square System will start playing back according to the date that you ve selected Calendar will be shown by using mouse to click on year and month TIME SEARCH _ Ka
21. must also be at least 8 digits Enter to setup Permissions for each user Change Admin Password Enter to change administrator s password 21 1 When logged out automatically you will have to operate limited authority such as operations like Freeze the screen Picture in picture Zoom in out switch between channels etc If you need to enter the Setup menu Search menu backup menu Record etc user s account and password are required When the key lock is activated automatically remote control and mouse may not function unless entering verified password remote site will not be able to operate all the features including toolbar o Enable the function x Disable the function 5 6 1 Permission Setup ACCOUNT SETUP Network M Playback Utility Ho Backup Password Expiry Date 2009104101 Playback Mask 4 amp CH01 CHO2 CH03 CH04 Cancel MENU ESC Cancel Cancel The Account Setup is set to provide individual user maximum of 4 users role based permissions including access to Setup menu Network operation PTZ function Playback Utility Backup and Mask on specific channels while playing back 5 Network Setup DHCP SETUP Type DHCP HTTP Setup DDNS Setup Mail Setup MENU ESC Carce IP 197 168 1 56 Description 77 MaiSeup Enterto Disable Eri roticaton and set
22. n Tilt Zoom Camera MOUSE USB Mouse CONTROL DEVICE Supports SATA Hard Disk x1 STORAGE DVD WRITER DISPLAY 2X Graphic OSD 720x576 720x288 360x288 PAL FRAME 30 60 120FPS RATE PAL 25 50 100FPS QUALITY Highest High Normal Low Lowest RECORDING RECORD MODE Manual Schedule Event Motion Detection Sensor Video Loss User selectable motion detection area for each camera individually MOTION DETECTION Sensitivity 5 levels PRE ALARM 16 MB POST ALARM 16 MB SEARCH MODE Time Event SPEED Normal REW amp FF 2x 4x 8x 16x 32x 64x Picture to Picture Pause PLAYBACK INTERNAL HDD EXTERNAL N A 36 INTERFACE Internal Exploerer Browser SERVICE TCP IP SMTP DHCP DDNS PPPoE EXTERNAL USB 2 0 1 Port at Front Panel USB Flash Driver BACKUP COMPRESSION H 264 NETWORK NETWORK BACKUP FILE H 264 Compression MONITORING Software Watchdog EUM Auto Reboot By Watchdog FIREWARE USB 2 0 Port 1 Port at Front Panel UPGRADE English Traditional Chinese Italian Japanese Portuguese Spanish German French Russian MULTI LANGUAGE Simplified Chinese Polish DIMENSION 188mm W x 54mm H x209mm D POWER SOURCE DC 12V 37 Chapter 8 NETWORK SURVEILLANCE 8 1 AP Software Installation and Setup Step 1 Enter the IP address of the DVR in the IE browser Step 2 A window will pop up Please enter the user name and password Default user name is admin and
23. ng before entering this menu Enter the menu system will show all the data model volume of HDD that is installed in the DVR Check the HDD you d like to initialize then press Start HDD initialization is successful when the status shows Succeed USB Initialization Clean up all data on USB Enter USB initialization and press YES to clean up all data on your USB The initialization is done when it shows Succeed System Recovery Restore system default values Reset System Events Reset all the recording events in the DVR Copy Setup to USB Copy configuration to a USB device There will be a file named sdvr config on your USB Download Setup from USB Download configuration from a USB device into DVR Upgrade Upgrade DVR through USB Please stop recording and backup setup configuration before upgrading System will reboot automatically when the upgrade is completed NOTE DONOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE as it may cause incomplete firmware upgrade and damage to the DVR 30 5 11 Diagnostic 9 26 2008 03 28 42PN Version 1 0 13 IP 192 168 1 77 MAC 00 17 4F 01 2E 38 HDD Status AESC Description Version The current firmware version of DVR The connected IP address of DVR If disconnected from network the IP Address screen will display NETWORK DISCONNECT MAC Address MAC Address of DVR HDD Volume The capacity of HDD HDD Used Rate Percenta
24. own button to navigate menu screen MENU 11 Press to pause playback IR SENSOR Input sensor for the remote control RIGHT DIRECTIONAL Right Directional Button BUTTON FAST b Fast Forward Playback Speed 2x 4x 8x 16x 32x 64x BUTTON SLOW I gt Slow Forward d Playback Speed 1 2x 1 4x 1 8x 1 16x BUTTON STOP v m Stop Playback LEFT DIRECTIONAL Left Directional Button BUTTON REWIND 4 44 Fast Forward Playback Speed 2x 4x 8x 16x 32x 64x ENTER MODE MODE owitch to full screen and quad screen 3 2 Real Panel Connectors ann r DC IN 12V 0 OUT 11234 10 9 8 RR 2 voeon enc input pons tor cameras 6 yeas Output port for the VGA monitor option EXTERNAL port see below for pin definition 7 EXTERNAL I O 485 Relay GND Alarm dm 1234 NO NC 8 AUDIO OUT RCA output port for an audio signal 9 SPOT MONITOR BNC port to display full screen image of all installed cameras in sequence DC 12V Socket for a DC 12V input 3 3 Remote Controller LOCK STATUS REC Q Qo Qoso zoom SB MENU II P ENTER PLAY Qa D SEARCH ZOOM FOCUS 8 Bco Remote Controller Button Definition O LOCK Os REC Enable Disable On Picture In Picture Format Use Directional button to navigate the menu and press Enter button to enter the menu item 7 6
25. rheating Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions TABLE OF CONTENTS Chapter Tl FEAL UIR Eo as eee 1 Chapter 2 FACKING DETAI Ren esu ta ta PIS t rales end d 2 Chapter LOCATION AND CONTROL rennen nani 3 Sod tont rane OME Ol peo 3 oe Iseal 4 222 2 5 3 4 Mouse Control 000000 0 0 00 7 3 0 10 Chapter 4 INSTALLA TION 12 4 1 System 12 2 2 rara DISK INSTA 13 Chapter 5 BASIC OPERATION and MENU 15 S MENU elis RTT IU D TUERI 15 5 2 Record 0 000 0 0 16 17 5 4 ochedule POT 19 5 59 Camera oes ea e beu a edo pat xa tai 20 DO FIC edi onto uid s 21
26. t character Enter to identify the password It will enter the setup menu if the password is verified BITE Menu Remote Control ler and Front Control different options under one item Av Switch to differentitems MaW SavesetupandbacktoLIVEmode 15 5 2 Record Setup Item HDD FULL Schedule Record Normal Schedule Record Motion Schedule Record Sensor Pre Alarm Record Audio Record Video Preservation Quality amp Frame Rate Setup 41112004 06 28 18 _RECORD SETUP HDD Full Schedule Record Motion Overwrites Schedule Record Sensor Pre Alarm Record Audio Record Video Preservation Quality amp Frame Rate Setup MENU ESC Cancel Description Select STOP to stop recording or OVERWRITE to reuse the HDD when HDD is full Stop Stop Recording Overwrite Start to overwrite beginning from the oldest data of HDD and continue to record Enable Disable normal recording Enable Disable recording while Motion is detected Enable Disable recording while Sensor is triggered Enable Disable pre event recording while motion or sensor is triggered but not in the recording mode This option decides if save the pre recording time 10 seconds data or not Enable Disable Audio recording Information stored within the HDD is preserved for only a specified length of time Setup
27. tronic Equipment Applicable European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product the safety and operating instructions must be read before unit is operated Make sure to switch the power off before you install the DVR There is the danger of an electric shock if the DVR is opened by an unqualified service engineer or installer Avoid using the DVR outside of the reference temperature and humidity indicated in the specification Avoid exposing the DVR to violent movement or vibration Do not use or store the DVR in direct sunlight or near to any source of heat Do not place any object into the holes used for air circulation Always use the DVR in a well ventilated location to prevent ove
28. up 7 24 5 7 1 Networking Setup The DVR supports DHCP LAN and ADSL access for network connection 5 7 1 1 DHCP DHCP SETUP Applications Setup Type If the DHCP option is used for DVR network connection an IP address is assigned by the DHCP server automatically 5 7 1 2 LAN LAN SETUP IP Address 192 d Subnet Mask 255 d door Gateway 440529 DNS AlAlAlA AIAIAIA Select LAN for network connection following information is required Description IP Address Enter IP address provided by ISP SubnetMask Enter IP address of Subnet Mask provided by ISP Enter IP address of Gate way provided by ISP Enter DNS address provided by ISP Note The correct DNS address must be entered for DDNS function 5 7 1 3 ADSL select ADSL for network connection the following information is required ADSL SETUP Applications Setup y User Name Password Item Description Enter user name provided by ISP Enter password provided by ISP 23 5 7 2 HTTP Setup 9 26 2008 03 08 02 HTTP SETUP Enable HTTP Server Port MENU fESG Cance Item Description Enable HTTP Server Check to enable HTTP server Users can remotely access into the DVR over the network if the HTTP function is activated Pot Enter a valid port value from 1 up to 65000 The default value is
29. wed to setup date and time of the DVR 5 9 2 2 Time Zone Setup 9 26 2008 03 21 21PM TIME ZONE SETUP Select Time Zone 00 1 Daylight Saving Time MENU In time zone setup users can change time zone and activate Daylight Saving Time function according to your DVR location Item Description Select Time Zone Enter to modify GMT from GMT 13 to GMT 13 Daylight Saving Time Turn On Off Daylight Saving Time 5 9 2 3 Internet Time Setup 1 E 3razizuon 17 53 35 INTERNET TIME SETUP E Automatically Synchronize Server Elite nist gor Update AE HB ERAI ES Ee ael Synchronize your DVR time with internet time server Description Check to enable DVR automatic synchronization function Select this Automatic Synchronization option to enable the function DVR will automatically synchronize the time upon rebooting or by every 24 hours after booting Date and Time show on DVR will immediately correspond with those in Update Now internet server 28 5 9 3 Buzzer amp Relay Setup BUZZER amp RELAY SETUP F Key Tone Relay Switch Connection N C Buzzer Duration Seconds 4 b 422 Sensor 2 B Motion Video Loss MENU IOKTTESC lCarce Item KEY TONE Enable Disable keystrokes Relay Switch Connection Set relay signal to be Normal Close N C or Normal Open N O Set up the duration from 1 999 seconds ALARM

Download Pdf Manuals

image

Related Search

Related Contents

Biosealer CR6  profesional en tecnologías de información 1  CIRCULAIRE n° E.T. 124.747 (AGFisc N° 43/2013) dd  Milwaukee 7110-20 User's Manual    Manual del usuario  Sunbeam BVSBKTSS01-033 Hot Beverage Maker User Manual  manuale di installazione uso e manutenzione it nl handleiding voor  Plustek MobileOffice C500  BMW Z4 sDrive30i Service and Warranty Information  

Copyright © All rights reserved.
Failed to retrieve file