Hardware Overview - D-Link
Contents
1. This final step allows you to specify how you receive notification of camera events Choose between an email notification or alternatively you can setup an FTP Notification You will need your email account settings or FTP details If you are unsure of this information please contact your ISP Once you have entered this information please click on the Next button Enable e mail notification User Name Password SMTP Mail Server Sender E mail Address Recipient E mail Address Port Enable FTP uploading F User Name Password Host Name Fath Filename Prefix Port Passive Mode 28 Section 3 Configuration You have completed the Motion Detection Wizard Click Apply to activate your settings Click Apply D Link DCS 6410 User Manual You have completed your camera setup Please click the Back button if you want to review or modify your settings or click on the Apply button to save and apply your settings Motion Detection Enable Alerts and Notification Do not notify me 29 Section 3 Configuration accurately LAN Settings DHCP Static IP Address IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Enable UPnP Network Setup Use this section to configure the network connections for you camera All relevant information must be entered Settings for your local area network Select this connection if you have a DHCP server running on your netw2. camera Time Zone Select your time zone from the drop down menu Enable Daylight Select to enable the daylight saving time Saving Auto Daylight Select this option so that your camera Saving will configure the Daylight Saving setting automatically Set date and time Select this option so that you may configure manually the Daylight Saving date and time manually Offset Sets the amount of time to be added or removed when Daylight Saving is enabled Synchronize with Enable this feature to obtain time configuration NTP server automatically from the NTP server NTP Server Network Time Protocol NTP synchronizes the DCS 6410 with an Internet time server Choose the one that is closest to your location Set the date and This option allows you to set the time and time manually date manually Copy Your This will synchronize the time information Computer s Time from your PC Settings D Link DCS 6410 User Manual DCS 6410 II LIVE VIDEO SETUP MAINTENANCE STATUS HELP Setup Wizard Network Setup Dynamic DNS Image Setup Audio and Video Motion Detection Recording Snapshot Digital Output RS 485 Logout Helpful Hints Setting the correct time and time zone will allow you to have accurate logs Don t Save Settings and proper scheduling for recordings Here you may configure the internal clock of your camera TIME CONFIGURATION Time Zone GMT 08 00 Pacific Time US amp Canada Enabl
3. DCS 6410 Version 1 2 Fixed Dome Network Camera User Manual Table of Contents Table of Contents Product Over VICW wiincsisceessiecsdsccescssesweetesesivecsrecssecnteccenens 3 Maintenance cae econ cnecccesenacaceuensaemecpesneinrsdeneneneatnass 41 Package Content ccccsccccsseeeceeeseeeeeeeeeeseeeeees 3 Device Management rrnnnnnnnnnnannnnnnnnnnennanenn 41 System Requirements rranrnarenannnrnnnrnnnnnnrnnnenuneneere 3 Backup and Restore ee 42 I g Lig 010 1 CHON REE E 4 Firmware UTE Luren ammran 43 FEE TU EE 5 SE DE EE A T 44 Hardware Overview rrrrrnnnrennrrnnanevnnrenanennnnennnennnn 6 Device Info rrrnrrnnarrnnnroraravrnnevnnnennnrrnanennnnen 44 Hardware Overview ccccseecceeeeeceeeeceeeeeeneeeseeeeees 7 Bolo EEE NN 45 Hardware Installation orrnnrnnrnnrnnrnnrnarnnnvnnnnnnnnrn 8 EN 46 Software Installation rronrornnrrnnrernnrennnrrnanennnner 10 Troubleshooting minsesreemmeindssennevdnsnsdene 47 Eu e 17 Setup Wizard Configuration ssseseseeeeeeee 47 Networking Basics svvnvnnnvvnvnvnnnvnnnnnnnnnenenennnnenneneenr 50 Web based Configuration Utility 0 cccseeee 21 Check your IP address cccccccseeeeeeeeeeeeeseeeees 50 Live Vide0 rrorrrnrrronrnnrronrannronnnnnrennnnnsrnnnnnnsnnnnnnnen 22 Statically Assign an IP address sence 51 Sep pg Teehnieal Sp slfloal nsmmmmmmnn n VZ 23 Network Setup rrrnrranr
4. IMAGE SETTINGS Brightness Saturation Contrast i Hue Reset to Default SECURITY D Link DCS 6410 User Manual 33 Section 3 Configuration Resolution FPS BPS RTSP URL Audio and Video You may configure 4 video profiles with different settings for your camera You may also set up different profiles for your computer and mobile display In addition you may configure the audio Speakers and microphone settings for your camera This option allows the user to choose the video resolution of the camera between 176x120 352x240 and 704x480 e QQVGA 176x120 Usually used for only displays of handheld devices e QVGA 352x240 Standard solution for mobile phones and PDAs e VGA 704x480 Standard solution for computer display Frames Per Second Highest FPS represents the maximum refresh rate when a picture is updated on the screen every second This provides a better quality of video Bits Per Second BPS will affect the bit rate of the video recorded by the camera A higher bit rate will increase the video quality Is the URL name used to connect to the camera when viewing from a mobile device or PDA D Link DCS 6410 User Manual Setup Wizard Network Setup Dynamic DNS Image Setup Motion Detection Time and Date Recording Snapshot Digital Output RS 485 Logout Select the audio and video settings that best suit your network environment Save Settings Don t Save Setting
5. IEEE 802 3u compliance e Support Full Duplex operations e 802 3x Flow Control support for Full Duplex mode e Supported IEEE 802 3af standard PoE PHYSICAL amp ENVIRONMENTAL DIAGNOSTIC LED e 2 color LED e Pan Range 170 170 e Tile Range 60 15 POWER INPUT e 100 240VAC 50 60Hz 12VDC 1 25A POWER CONSUMPTION e 11 04W e Input 100 240VAC 50 60Hz e Output 12VDC 1 25A DIMENSIONS WxDxH e 7 68 W x 7 09 H x 4 33 in H 195 x 180 x 110mm WEIGHT e 0 58kg SECURITY e Administrator and user group protected e Password authentication SURVEILLANCE SOFTWARE FUNCTIONS Remote management control of up to 32 cameras e Viewing of up to 32 cameras on one screen e Supports all management functions provided in web interface e Scheduled motion triggered or manual recording options D Link DCS 6410 User Manual REMOTE MANAGEMENT e Configuration accessible via web browser e Take snapshots video clips and save to local hard drive via web browser or NAS SURVEILLANCE Motion detection weekly schedule e Upload snapshots via email e Upload snapshots via FTP SYSTEM REQUIREMENTS e Operating System Microsoft XP Vista e Browser Internet Explorer Version 6 above Firefox 2 0 above Safari 2 0 above SUPPORTED SOFTWARE e Handsets with 3GPP player e Packet Video Player 3 0 e QuickTime 6 5 e Real Player 10 5 OPERATION TEMPERATURE e 0 to 402 C 32 to 104 F STORAGE TEMPERATURE e 20 to 70 C 4
6. Logout save Settings Don t Save Settings D Link DCS 6410 User Manual 39 Section 3 Configuration RS 485 You may configure the RS 485 settings or communication specifications baud rate data bit stop bit and parity bit for your camera RS 485 is a serial communication method for computers and devices For your camera the RS 485 is used to control a PAN TILT device such as an external camera enclosure to perform PAN and TILT movement Support PAN When enabling Support PAN TILT a control panel razet SS TILT will be displayed on the Live Video page allowing control through RS 485 for an external camera enclosure Setup Wizard Helpful Hints Protocol Select one protocol type from the pull down menu ESETE this section enable you to specty the camera RS 485 settings ID value is between ang ID Range from 1 to 255 is the identifier for each RS 485 either 1 bit or 2 bits devices Ce o support PAN TILT Protocol Baud Rate Range from 2400 to 38400 bps It is a speed ESSIE cous rare measurement for communication between a aes Stop Bit transmitter and receiver indicates the number of bit E Pattee transfers per second Higher baud rate will reduce the distance of the two devices transmitter and receiver By default the value is 2400 Data Bit Either 7 or 8 It is a measurement of the actual data bits in a transmission By default the value is 7 SECURITY Stop Bit Either 1 or 2 It is used to signal the
7. Recording DYNAMIC DNS SETTING Snapshot Enable DDNS Digital Output Server Address lt lt Select Dynamic DNS Server v R5 485 Host Name Logout User Name Password Verify Password Timeout 576 hours Status Disable Don t Save Settings SECURITY 32 Section 3 Configuration Image Setup In this section you may configure the image settings for your camera preview of the image will be shown in the window of Live Video Brightness An adjustable setting to compensate for backlit scenes DCS 6410 LIVE VIDEO SETUP MAINTENANCE STATUS HELP Saturation This setting controls the strength of color fom FT Helpful Hints j Peeters SEE Your changes made for the image settings will be reflected immediately The results can be seen a arene E ERE black and white to bold colors KE on chances made for tho mage settings Saturation and Hue can 100 allowing you to fine tune your image settings Contrast Allows for the measurement of color intensity or Beads MENE Brightness tis used Motion Detection to compensate for backlit SS ee 2000 01 29 03 57 41 DC5 6410 scenes stren gth A Time and Date Tia ee gt Saturation Controls Recording the strength of color Ta TER from black and white to bold colors Hue This setting controls the color tone Digital Output Contrast Heips to improve the image under RS 33 5 485 a dull grey sky Snapshot Logout Hue Is the gradation of color
8. TENSE REE GE On Screen Display feature in order to display camera name and time stamp for both live video Logout and recordings of your camera th Password Enter a password for the new account having to reset tre camera ADMIN PASSWORD SETTING ks at It IS Enabling OSD sie ni User List All the existing user accounts will be ne me Eeen the vie displayed here You may delete any accounts included in the list ADD USER ACCOUNT User Name 20 users maximum Camera Name Create a unique name for your camera to Fl ae i Retype Passwor access the camera in your web browser For example DCS 6410 By default USER LIST Enable OSD Select this option to enable the On Screen MM mem gt Display feature for your camera Label Enter the label name Camera Name DCS 6410 36 characters maximum Enable OSD Label DCS 6410 Show time Select this option to enable the time stamp samen display in the video screen LED light on off D Link DCS 6410 User Manual 41 Section 3 Configuration Backup and Restore In this section you may backup restore and reset the settings as well as reboot your camera Save To Local Hard You may save and document your current Drive configuration settings into your computer Load From Local Locate a pre saved configuration file by Hard Drive clicking Browse and then restore the pre defined settings to your camera by clicking Load Configuration Restore To Factory Defa
9. You may also select your language setting using the drop down menu You can zoom in and out of the live video image using your mouse Right click to zoom out and left click to Zoom in on the image Ei Digital Input Indicator Motion Trigger Indicator 2 Recording Indicator Video Profile 1 Video Profile 2 Video Profile 3 Video Profile 4 This indicator will light up when there is an available digital input signal When a trigger event occurs this will light up Note he video motion feature of your camera must be enabled When a recording is in progress this indicator will light up XX Full screen mode Taking a Snapshot Recording a Video Clip Seta Storage Folder Listen Stop Listening Talk Stop Talking A Start Stop Digital Output D Link DCS 6410 User Manual Product DCS 6410 2008 09 02 18 28 55D DCS 6410 Haex u eA 22 Section 3 Configuration Setup Wizard To quickly configure your Network Camera click Internet Product DCS 6410 Frmware Verson 1 00 Connection Setup Wizard or click Manual Internet Connection Setup to manually configure your Network Camera DCS 6410 LIVE VIDEO SETUP MAINTENANCE STATUS HELP Setup Wizard Helpful Hints you are an advanced Network Setup In this section you can setup the IP camera s wired network interface settings If you are x ic DNS configuring this device for the first time D Link recommends that you select the Internet an ine rme
10. and allows the administrator to manage and control the Network Camera anywhere and anytime Apply the Network Camera to monitor various objects and places such as homes offices banks hospitals child care centers amusement parks and other varieties of industrial and public monitoring The Network Camera can also be used for intruder detection with its motion detection mode capture still images and video images for archiving and many more applications D Link DCS 6410 User Manual 5 Section 1 Product Overview Hardware Qverview DC Power Connector The DC power input connector is located on the DCS 6410 Network Camera s back panel and is labeled 12V DC with a single socket to supply power to the Network Camera Reset Button Reset will be initiated when the reset button is pressed once and held until the Power LED flashes through its cycle twice D Link DCS 6410 User Manual Ethernet Cable Connector PoE The Network Camera s back panel features an RJ 45 connector for connections to 10Base T Ethernet cabling or 100Base T X Fast Ethernet cabling This network port supports the NWay protocol allowing the Network Camera to automatically detect or negotiate the transmission speed of the network Section 1 Product Overview Hardware Overview Audio Out Connector The DCS 6410 provides an Audio Out Connector to be used for 2 way audio Speakers not included may be connected to the camera to provide audio for
11. configured for the ports the DCS 6410 is using Other possible problems might be due to the network cable Try replacing your network cable Test the network interface of the product by connecting a local computer to the unit utilizing a Ethernet crossover cable If the problem is not solved the Network Camera might be faulty 11 Why does the Network Camera work locally but not externally This might be caused by network firewall protection The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN Check with the Network Administrator for your network Make sure that the Network Camera isn t conflicting with any Web server you may have running on your network The default router setting might be a possible reason Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN D Link DCS 6410 User Manual 48 Section 5 Troubleshooting 12 The images appear to be of poor quality how can I improve the image quality Make sure that your computer s display properties are set above 256 colors Using 16 or 256 colors on your computer will produce dithering artifacts in the image making the image appear to be of poor quality The configuration on the Network Camera image display is incorrect Through the Advanced gt Image Setting section of the Web management you need to adjust the image related parameters such as brightness
12. determine the trigger event s and configure the settings of your FTP E mail and or email notification s TRIGGER E Enable Snapshot Don t Save Settings Trigger Event Send to Motion Detection D I Signal 1 D I Signal 2 E mail Address User Name Password SMTP Mail Server Sender E mail Address Recipient E mail Address Port 25 range 1 to 65535 FTP Server User Name Password Host Name Path Filename Prefix Port 21 range 1 to 65535 Passive Mode 38 Section 3 Configuration Digital Output You may enable the Digital Output DO feature and configure the source of event for your camera Enable D O This enables the D O to send a signal when there PT Fimware Version 1 00 signal is a triggered event Trigger Event You can choose from one or up to three events such as Motion Detection D I Signal 1 and D I Signal 2 for the sources of the triggered MAINTENANCE events Setup Wizard Helpful Hints You may choose a trigger Er Here you can enable your D O port as well as how the event will be triggered BF event lke Motion detection or triggers from the D I Save Settings Don t Save Settings Dynamic DNS port When an eventis triggered the D O will begin sending a signal Image Setup TRIGGER Audio and Video Motion Detection F Enable D O Signal Time and Date Trigger Event Recording Motion Detection Snapshot D I Signal 1 Digital Output R5 485
13. 2 way communication oiany Microphone Connector The DCS 6410 Fixed Dome Network Camera doesn t supports built in microphone But you have the option of using an external microphone by plugging it into the microphone connector D Link DCS 6410 User Manual ooo co go EN AA N Nb er GR DI DO The DCS 6410 provides a general I O terminal block The I O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices Video Out The DCS 6410 provides an Analog RCA Video port output allowing you to connect to a TV for local viewing The DCS 6410 can also be connected to a VCR to record activities Section 2 Installation Hardware Installation When Mounting to a Ceiling Find a suitable place to install the camera using the alignment stencil Place the camera at the desired operating location and insert the screws through the two holes located at the base of the camera Use a screwdriver to tighten and secure D Link DCS 6410 User Manual 8 Section 2 Installation Network Deployment General Connection without PoE Connect the network camera to a switch via an Ethernet cable Connect the supplied power cable from the camera to a power outlet Connection with a PoE Switch If using a PoE switch connect the network camera to the switch via an Ethernet cable which will provide both power and data transmission over a single cabl
14. 8 ef 3b 192 168 0 102 00 1c f0 d3 fb 0e 192 168 0 100 00 1e 58 b4 66 6b 192 168 0 108 00 16 58 04 66 72 192 168 0 98 20 Section 3 Configuration Web based Gonfiguration Utility This section will show you how to configure your new D Link Network Camera using the Web based Configuration Utility To access the configuration utility open a web browser such as Internet Explorer and enter the IP address of D Link Microsoft Internet Explorer your Network Camera http 192 168 0 20 File Edit View Favorites Tools Help Note 192 168 0 20 is only an example Your address may Q Back gt E A po Search Address E 192 168 0 20 Go Enter Admin for the username and leave the password blank by default Note To change Your password please refer tO page 41 The server 192 168 0 102 at DC5 6410 requires a username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection ven admin Password Remember my password Click OK D Link DCS 6410 User Manual 21 Section 3 Configuration Live Video Camera This section shows your camera s live video and event indicators You may select the available thumbnails for your options of predefined Video Profile Full Screen mode and action items of taking Snapshot Recording Set Storage Folder Listen Talk and Digital Output
15. Browse Upload Start uploading the new firmware to your camera D Link DCS 6410 User Manual Product DCS 6410 Firmware Version 1 00 DCS 6410 II LIVE VIDEO SETUP MAINTENANCE STATUS HELP Device Management Backup and Restore Firmware Upgrade Logout A new firmware upgrade may be available for your IP camera It is recommended to keep your IP camera firmware up to date to maintain and improve the functionality and performance of your internet camera Click here D Link Support Page to check for the latest firmware version available To upgrade the firmware on your IP camera please download and save the latest firmware version from the D Link Support Page to your local hard drive Locate the file on your local hard drive by clicking the Browse button Once you have found and opened the file using the browse button click the Upload button to start the firmware upgrade FIRMWARE INFORMATION Current Firmware Version 1 00 Current Product Name DCS 6410 FIRMWARE UPGRADE File Path Helpful Hints Firmware upgrade are released periodically to improve the functionality of your IP camera and also to add new features If yo run into a problem with a specific feature ty check for an upgrade and see if updated firmware is available for your IP camera SECURITY 43 Section 3 Configuration Status Device Info This page displays all the details about your device and network connection Pro
16. ECURITY 34 Section 3 Configuration Motion Detection Enabling Video Motion will allow your camera to use the motion detection feature You may also draw out the motion area for the monitoring Enable Video Check this option to turn on the motion detection PEST nes Visse fol Motion feature for your camera Sensitivity Allows you to set the measurable difference between two sequential images that would indicate motion Setup Wizard Helpful Hints Jains rts In order to turn on motion detection you must first select the checkbox to enable the motion Raiders Dynamic DNS detection feature Then you may draw out the monitoring areas ean Draw motion Select this option to draw out the motion detection FEE ee area area by dragging your mouse in the window i indicated by the red colored box sekst Draw motion area z3 AEG Enable Video Motion Drag your mouse to add Me AE 2008 09 02 18 32 320 DCS 410 ee a Erase motion Use this option to erase your motion detection _ _ ere i Snapsno erase motion detection area area by dragging your mouse in the window ve Sensitivit 90 0 100 R5 485 Logout Drawing Mode amp Draw motion area Erase motion area Don t Save Settings SECURITY D Link DCS 6410 User Manual 30 Section 3 Configuration Time and Date In this section you may automatically or manually configure update and maintain the internal system clock for your
17. ILL LICENSE THE SOFTWARE TO YOU ONLY IF YOU FIRST ACCEPT THE TERMS OF THIS AGREEMENT By INSTALLING AND OR USING THE SOFTWARE YOU AGREE TO THESE TERMS IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT PROMPTLY RETURN THE UNUSED SOFTWARE TO THE PARTY D LINK OR ITS AUTHORIZED RESELLER FROM Do pou accept all the terms of the preceding License Agreement If you choose No the setup will clase To install Setup Wizard SE you must accept this agreement InstallShield Back Yes Ho Click Yes D Link DCS 6410 User Manual 11 Section 2 Installation To start the installation click Next Note The installation may take several minutes to complete Click Next D Link DCS 6410 User Manual InstallShield W sk agenter ads g A st T JTE 4 r Ady in Setup allShreld Wizard Izar a Choose Destination Location Select folder where Setup will install files Setup will install Setup Wizard SE in the following folder To install to this folder click Mest To install to different folder click Browse and select another folder Destination Folder C Program FilezD LinksSetuypywizardsE Browse InstallShield Cancel kh men ot Hi ET Status Setup Wizard SE Setup i performing the requested operations InstallShield Cancel 12 Section 2 Installation Click Finish to complete the installation Click Finish D Link DCS 6410 User Manual InstallShield Wizard Co
18. Video Motion Detection Time and Date Recording Snapshot Digital Output RS 485 MAINTENANCE Device Management Backup and Restore Firmware Upgrade STATUS e Device Info Log D Link DCS 6410 User Manual 46 Section 5 Troubleshooting Troubleshooting 1 What is a Network Camera The Network Camera is a stand alone system connecting directly to an Ethernet or Fast Ethernet network It differs from a conventional PC Camera the Network Camera is an all in one system with built in CPU and Web based solutions providing a low cost solution that can transmit high quality video images for monitoring The Network Camera can be managed remotely accessed and controlled using any PC Notebook over an Intranet or the Internet from a Web browser 2 What is the maximum number of users that can be allowed to access DCS 6410 simultaneously The maximum number of users that can log onto the Network Camera at the same time is 10 Please keep in mind the overall performance of the transmission speed will slow down when many users are logged on 3 What algorithm is used to compress the digital image The Network Camera utilizes MPEG 4 simple profile image compression technology to provide high quality images 4 Can capture still images from the Network Camera Yes you are able to capture still images with the snapshot function from the software application CD supplied with the Network Camera or with the snapshot function o
19. a static IP address please follow the steps below Step 1 Windows XP Click on Start gt Control Panel gt Network Connections Windows 2000 From the desktop right click My Network Places gt Properties Step 2 Right click on the Local Area Connection which represents your D Link network adapter and select Properties Step 3 Highlight Internet Protocol TCP IP and click Properties Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router Internet Protocol TCP IP Properties Example If the camera s LAN IP address is 192 168 0 1 make your IP address You ca got IP seting assigned automaticaly you network supports 192 168 0 X where X is a number between 2 and 99 Make sure that the number Tre you choose is not in use on the network Set Default Gateway the same as the LAN Er IP address of your router 192 168 0 1 P addess 182 168 0 82 Subnet mask 255 255 255 0 Default gateway 192 168 0 ji Set Primary DNS the same as the LAN IP address of your router 192 168 0 1 The ae secondary DNS is not needed or you may enter a DNS server from your ISP Use the folowing DNS server addresses Preferred DNS Ei 92 1 68 AR pi 4 Alternate DNS ii Step 5 Click OK twice to save your settings D Link DCS 6410 User Manual 51 Appendix B Technical Specifications Technical Specificatio
20. contrast hue and power line frequency for fluorescent light D Link DCS 6410 User Manual 49 Appendix A Networking Basics Networking Basics Check your IP address After you install your new D Link adapter by default the TCP IP settings should be set to obtain an IP address from a DHCP server i e wireless router automatically To verify your IP address please follow the steps below Click on Start gt Run In the run box type cmd and click OK At the prompt type ipconfig and press Enter s C WINDOWS system32 cmd exe Microsoft Windows AF Version 5 1 2600 GC Copyright 1985 2001 Microsoft Corp This will display the IP address subnet mask and the default gateway of your adapter G 5 Documents and Settingys gt ipconf ig Windows IP Configuration Ethernet adapter Local Area Connection If the address is 0 0 0 0 check your adapter installation security settings and the settings Connection specific DNS Suffix POSS sk Default Gateway on your router Some firewall software programs RMN may block a DHCP request on newly installed adapters If you are connecting to a wireless network at a hotspot e g hotel coffee shop airport please contact an employee or administrator to verify their wireless network settings D Link DCS 6410 User Manual 50 Appendix A Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway router or you need to assign
21. cording Digital Input 1 or Digital Input 2 is triggered Prerecord A preset amount of time before motion recording is triggered Postrecord A preset amount of time after motion recording is triggered Scheduled Select this option to manually configure the starting and ending time for the recording D Link DCS 6410 User Manual DCS 6410 Hi LIVE VIDEO SETUP MAINTENANCE STATUS Wizard Network Setup Dynamic DNS Image Setup Audio and Video Motion Detection Time and Date Recording Snapshot Digital Output RS 485 Logout Helpful Hints Enable Recording will allow Here you may configure and schedule the recording of your camera pair ica A Save Settings Don t Save Settings RECORDING g checkbox Then select Scheduling method to specify when the camer will record the vi Enable recording Record to Samba network drive Samba Auth Anonymous User name Password Password confirm Server Shared folder Samba status disabled Get status Recording Options Resolution profile 1 Record until 100 MB of free space is left minimum is 32MB When storage is full amp S Stop recording Overwrite older recordings Scheduling Event Based Motion detection triggered recording Digital input 1 triggered recording Digital input 2 triggered recording Prerecord 0 seconds range 0 to 15 seconds Postrecord seconds range 0 to 15 seconds Continuous Samba only Scheduled Samba o
22. duct DC5 6410 Firmware Version 1 00 DCS 6410 LIVE VIDEO SETUP MAINTENANCE STATUS HELP Device Info Helpful Hints is page displays all the E All of your network connection details are displayed on this page The firmware version is also ME page EAN information about the displayed here camera and network settings Logout INFORMATION Camera Name DCS 6410 Time amp Date Wed 5ep 3 18 36 30 2008 Firmware Version 1 00 2023 FIX MIC BOOST MAC Address 00 03 18 58 EF 3B IP Address 192 168 0 102 IP Subnet Mask Va Default Gateway 192 168 0 1 Primary DNS 192 168 0 1 Secondary DNS PPPoE Disable DDNS Disable SECURITY D Link DCS 6410 User Manual 44 Section 3 Configuration Log This page displays the log information of your camera You may also download the information by clicking Download Product DCS 6410 Firmware Version 1 00 LIVE VIDEO SETUP MAINTENANCE STATUS HELP Helpful Hints The system log records camera events that have occurred ir be peas dicking the Download ENT button and you can dear CURREN TILOS the log by dicking on the Clear button 2008 09 03 14 23 41 Motion is detected SECURITY D Link DCS 6410 User Manual 45 Section 3 Configuration Product DCS 5410 Help Firmware Version 1 00 DCS 6410 LIVE VIDEO SETUP MAINTENANCE STATUS Help Menu Logout LIVE VIDEO Camera Setup Wizard Network Setup Dynamic DNS Image Setup Audio And
23. e D Link DCS 6410 User Manual 9 Section 2 Installation Software Installation Turn on the computer and insert the D Link DCS 6410 Driver CD into the CD ROM drive The following step by step instructions will be shown in Windows XP Similar steps and screens will also be shown for other Windows operating systems D Link FIXED DOME NETWORK CAMERA Setup Wizard Click Setup Wizard amp ffdshow amp View Documentation Support DCS 6410 Business Class Networking If the CD Autorun function does not automatically start on your computer click Windows Start gt Run In the Run command box type D autorun exe where D represents the drive letter of your CD ROM If it does start proceed to the next screen D Link DCS 6410 User Manual 10 Section 2 Installation Click Next to continue Welcome to the InstallShield Wizard for Setup Wizard SE The InstallShield Wizard will install Setup Wizard SE on your computer To continue click Next Click Next i Mest gt i Cancel Click Yes to accept the License Agreement InstallShield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement D Link Software License Agreement General Terms a IMPORTANT READ BEFORE COPYING INSTALLING OR USING PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THIS SOFTWARE D LINK SYSTEMS INC D LINK W
24. e Daylight Saving Auto Daylight Saving Set date and time manually Offset 100 Month Week Day of week Hour Minutes Start time 3 2 Sunday End time 11 w 1 Sunday AUTOMATIC TIME CONFIGURATION Synchronize with NTP Server NTP Server ntp 1 dlink com lt lt Select NTP Server v SET DATE AND TIME MANUALLY Set date and time manually Year 2008 Month 9 v Day Hour 18 Minute 32 Second Don t Save Settings SECURITY 36 Section 3 Configuration Recording This section allows you to configure and schedule the recording setting for your IP camera Enable Recording Select this option to enable the recording feature Samba Auth To access your account on the Samba network drive enter your account and password or select anonymous Server Enter the name of your Samba server Shared Folder The name of the shared folder used for recording Test Click this thumbnail to verify the connection status of your camera to the Samba network drive Samba Status Displays the connection status that is determined by the system You can click Get Status to refresh the status Resolution Select your pre defined profile from the drop down menu When Storage is When the recording storage area is full you may choose full to stop recording or recycle the recording files so that your camera can record the video continuously Gontinuous Select to record continuously Event Based Allows Recording when Motion Re
25. e Setup Wizard Setup Wizard Configuration Click on the icon that has been created in your Windows Start menu B Adobe Reader 8 eg Apple Software Update Pr Default Programs Click D Link Setup Wizard SE E D Link Setup Wizard SE m Intel Viiv Settings nte Intel Viiv Software User s Guide E Internet Explorer Fi Windows Mail GET Windows Media Center I D Windows Media Player Recent Items E Windows Meeting Space amp Windows Movie Maker Computer ica Windows Photo Gallery a Windows Update Ac3Tool Accessories pm Administrative Tools AutoGK Avisynth 25 de Azureus Vuze di BulletProof FTP Client v2 5 Administrative Tools Dell Printers Documents Network Connect To Control Panel Default Programs Help and Support Run KC Jie ale D Link DCS 6410 User Manual 17 Section 3 Configuration The Setup Wizard will appear and show the MAG address of your Emo a DCS 6410 and an IP Address which may or may not be correct Ed te depending on what you have your DCS 6410 connected to If you have a DHCP server on your network there will be a valid IP Address displayed here Click the Wizard button to continue MAC Address Current IP Address Device Name 00 03 1b 58 ef 3b 192 168 0 102 DCS 6410 00 1c f0 d3 fb 0e 192 168 0 100 DCS 3410 00 1e 56 b4 66 6b 192 168 0 108 DCS 3410 Search 00 1e 58 b4 66 72 192 168 0 98 DCS 3410 Note A DHCP server is a device tha
26. ect the directory to install ffdshow in C Program Files ffdshow Browse Space required 728KB Space available 14 36 15 Section 2 Installation Click Close Before using ffdshow you must configure its properties From your computer click on Start gt Programs gt ffdshow gt Configuration At the ffdshow properties window scroll to the bottom and click Miscellaneous Be sure Autodetect is checked and Error resilience and Error concealment are set to none Click OK and close the window Click OK D Link DCS 6410 User Manual FF ffdshow Completed Completed oe oov TT TT TT TT TT TETT TT TT TT TT Show details ffdshow Properties default Configuration Info Tray amp dialog settings Image settings Postprocessing L Picture properties L Offset Blur L Sharpen LI Noise LI Subtitles Font Resize C Aspect amp crop Miscellaneous About gt Supported codecs jw WWI Decode using sib Raw video M px 3 i ped Decade using svib iY DIVES Becade using svib Iv MP4s MP42 P41 I H 263 aVID viD MPEGS video codec fiw wid org MP43 Microsoft MPEG 4 Video Codec Y3 fused in some ASFs MP42 Microsoft MPEG 4 Video Codec V2 MP4 Microsoft MPEG 4 Video Codec Y1 fold and low quality cancel anol 16 Section 3 Configuration Configuration This section will show you how to configure your new D Link Network Camera using th
27. em with a built in CPU and Web server providing a low cost solution capable of solving demanding security and home office monitoring needs It is designed with aluminum casing for maximum heat dissipation and better protection Snapshot enables you to save a snapshot image directly from a Web browser to a local hard drive without installing any software With 0 1 lux light sensitivity the DCS 6410 is capable of capturing video in rooms with minimal lighting With the Built In IR LED Lens you can customize your surveillance application to enable low light or night vision video streaming The DCS 6410 gives you the ability to monitor video and audio in your home office using an Internet browser anywhere in the world Simple installation procedures along with the built in Web based interface offers easy integration to your network environments Note Use of audio or video equipment for recording the image or voice of a person without their knowledge and consent IS prohibited in certain states or jurisdictions Nothing herein represents a warranty or representation that the D Link product provided herein is suitable for the end user s intended use under the applicable laws of his or her state D Link disclaims any liability whatsoever for any end user use of the D Link product which fails to comply with applicable state local or federal laws D Link DCS 6410 User Manual 4 Section 1 Product Overview Features e Supports a Variety of Protocols Supp
28. end of communication for a single packet The more bits used for stop bits the greater the lenience in synchronizing the different clocks but the slower the data transmission rate By default the value is 1 Parity Bit Choices of No Even and Odd It is a simple form of error checking used in serial communication and you may use no parity For even and odd parity the serial port sets the parity bit the last bit after the data bits to a value to ensure that the transmission has an even or odd number of logic high bits For example if the data is 011 for even parity the parity bit is 0 to keep the number of logic high bits even If the parity is odd the parity bit is 1 resulting in 3 logic high bits D Link DCS 6410 User Manual 40 Section 3 Configuration Maintenance Device Management You may modify the name and administrator s password of your camera as well as add and manage the user accounts for accessing the camera You may also use this section to create the unique name and configure the OSD setting for your camera Admin password Set a new password for the administrator s Product DCS 6410 Frmware Version 1 00 setting account Eo USET ACCOM E AUA Hew Heer decount User name Enter a user name for the new account oske Here you can change the administrators password for your account as well as add and or delete lese leppe E R NA user account s You can also configure a unique name for your camera and enable its OSD
29. ig To quickly configure your Network Camera s motion oe es cay m m EAE Ae 7 Setup to input the network settin u rout al ve detection settings click Motion Detection Setup Wizard td __ ae and go to page 27 If you want to enter your settings without messe re running the wizard click Manual Motion Detection Setup mo ett gt Wizard and follow the instructions on screen If you wish to modify or configure the Motion Digital Output Detection manually select the Manual Motion Detection Setup and skip to page 30 ee ENER pe o l Logout SECURITY Internet Connection Setup Wizard This wizard will guide you through a step by step process to configure your new D Link Camera and connect the camera to the Internet Click Next to continue This wizard will guide you through a step by step process to configure your new D Link Camera and connect the camera to the internet To set up your camera motion detection settings please click Back button to close this wizard and re open the motion detection setup wizard Step 1 Setup LAN Settings Step 2 Setup Internet Settings Step 3 Setup DDNS Settings Step 4 Camera Name Settings Step 5 Setup Time Zone Click Next D Link DCS 6410 User Manual 23 Section 3 Configuration Select DHCP if you are unsure which settings to pick Click Next to continue and skip to page 25 Select Static IP if your Internet Service Provider has provided you with connection settings or y
30. il Settings allow you to specify the ports you reserve for both HTTP and RTSP Streaming Snapshot Digital Output HTTP Portis the port you allocate in order to connect to the camera via a standard web browser R5 485 Primary DNS Logout Secondary DNS RTSP Port is the port you allocate in order to connect to a camera by using V Enable UPnP V Enable UPnP port forwarding streaming mobile device s such as a mobile phone or A Enable PPPoE User Name Password Confirm password PORT DETAIL SETTINGS HTTP port 80 RTSP port 554 Save Settings Don t Save Settings SECURITY Enable UPnP port Enable this setting to allow your camera to add port forwarding entries into the router automatically forwarding D Link DCS 6410 User Manual 30 Section 3 Configuration Enable PPPoE Enable this setting if your network is using PPPoE service User Name The unique name of your account You may obtain this information from your ISP Password The password of your account You may obtain this information from your ISP HTTP Port The default value is 80 RTSP port The port number that you use for RTSP streaming to mobile devices such as mobile phones or PDAs The default port number is 554 D Link DCS 6410 User Manual 31 Section 3 Configuration Enable DDNS Server Name Host Name User name Password Status Dynamic DNS DDNS Dynamic Domain Name Server wi
31. ll hold a DNS host name and synchronize the public IP address of the modem when it has been modified The user name and password are required when using the DDNS service Select the checkbox to enable the DDNS function Select your Dynamic DNS provider from the pull down menu or enter the server address manually Enter the host name of the DDNS server Enter your user name or e mail used to connect to the DDNS Enter your password used to connect to the DDNS server Indicate the connection status automatically determined by the system D Link DCS 6410 User Manual Product DCS 6410 Firmware Version 1 00 DCS 6410 II LIVE VIDEO SETUP MAINTENANCE STATUS HELP Setup Wizard Helpful Hints Network Setup i Dynamic DNS is useful if The Dynamic DNS feature allows you to use a domain name that you have purchased vn havea OSL or Cable www yourdomain com to access your camera with a dynamically assigned IP address Most ee ae tak broadband Internet service providers assign dynamic changing IP addresses By using a DDNS changes your modem IP Image Setup service you can enter your domain name to connect to your camera no matter what your IP address periodically This Sees address is will allow you to assign a Audio and Video website domain name to ss Sian up for D Link s Free DDNS service at www DLinkDDNS com your camera instead of Motion Detection connecting through an IP TIGER address ester Dani Save Settings
32. mplete Setup has finished installing Setup Wizard SE on pour Computer i Cancel 13 Section 2 Installation Now click on ffdshow from the autorun screen This will install the proper codecs that will allow you to playback video taken by the DCS 6410 FIXED DOME NETWORK CAMERA amp Setup Wizard Click ffdshow ffdshow View Documentation amp Support DCS 6410 Business Class Networking FF ffdshow License Agreement This will install fidshow MPEG4 decoder Please read the license terms eres below before installing GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston M 04111 1307 USA Everyone i permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Click Agree D Link DCS 6410 User Manual 14 Section 2 Installation Click Next Click Install D Link DCS 6410 User Manual FF ffdshow Installation Options This will install fidhow DirectShow filter om your computer select components to install DirectShow Filter required t Postprocessing recommended t Documentation optional Space required 728KB FF ffdshow Installation Directory Choose a directory to install in to Sel
33. n the Home page using an Internet browser 5 Can the Network Camera be used outdoors The Network Camera is not weatherproof It needs to be equipped with a weatherproof case to be used outdoors and it is not recommended 6 When physically connecting the Network Camera to a network what network cabling is required The Network Camera uses Category 5 UTP cable allowing 10 Base T and 100 Base T networking D Link DCS 6410 User Manual 47 Section 5 Troubleshooting 7 Can the Network Camera be setup as a PC cam on a computer No the DCS 6410 Network Camera is used only on a Ethernet or Fast Ethernet network 8 Can the DCS 6410 be connected to the network if it consists of only private IP addresses Yes the Network Camera can be connected to a LAN with private IP addresses 9 Can the DCS 6410 be installed and work if a firewall exists on the network If a firewall exists in the network port 80 is open for ordinary data communication The DCS 6410 uses port 554 for streaming audio and video These ports or the ports you specify from the Advanced Tab in the Configuration screen need to be opened in the firewall 10 Why am I unable to access the DCS 6410 from a Web browser If a router or firewall is used on the network the correct ports for the DCS 6410 may not be configured on the router or firewall To correct the problem you need to determine if the DCS 6410 is behind a router or firewall and if the router or firewall is properly
34. nannnnrnanenarnnnrnnnennnrnannnenn 30 Dynamic DNS Lauen 32 Image Setup 0 ccccsececsececcesecceeesceeeeseeeees 33 Audio and Video re 34 Motion Detection 24 smertene kkasddsmadn 35 Menved 36 22160 0 0 EEE 37 DMA DS NOU EE 38 Digital Output EE 39 HSA mensen 40 D Link DCS 6410 User Manual Section 1 Product Overview Package Contents e D Link DCS 6410 Fixed Dome Network Camera e CAT5 Ethernet Cable e Power Adapter e Manual and Software on CD e Quick Install Guide e Camera Stand Note Using a power supply with a different voltage than the one included with the package will cause damage and void the warranty for this product If any of the above items are missing please contact your reseller System Requirements e Windows XP or Windows Vista e At least 256MB of memory 512MB recommended e An available Ethernet connection e Internet Explorer 6 x or higher Internet Web Browser e VGA card resolution 800x600 or above e CPU 1 7GHz or above processor 2 8GHz plus processor with 512MB memory and a 32MB video card is required for multiple camera viewing and recording using the D ViewCam software D Link DCS 6410 User Manual Section 1 Product Overview Introduction The D Link DCS 6410 Fixed Dome Network Camera with Built In IR LEDs and PoE support is a powerful surveillance system that can connect to your network The DCS 6410 differs from a conventional PC Camera because it is a standalone syst
35. nfiguration Motion Detection Setup Wizard This wizard will guide you through a step by step process to configure your new D Link Camera motion detection functions Click Next to continue Click Next This section will allow you to enable or disable motion detection as well as control the camera s sensitivity or its ability to detect movement You can select the Drawing Mode to draw or erase the motion area in the window of live video This wizard will guide you through a step by step process to configure your camera s motion detection functions To setup the camera LAN or Internet settings please click on the Back button to close this wizard and re open the Camera Setup wizard Otherwise click on the Next button to begin Step 1 Specify Motion Detection Area Settings e Step 2 Alerts and Notifications This section will allow you to enable or disable motion detection as well as control the sensitivity of your camera s ability to detect movement Enable Video Motion 2008 0507 17 16 300 OCS 3410 90 Omw100 C Draw motion area Erase motion area Clear Click Next D Link DCS 6410 User Manual 2 Section 3 Configuration This step allows you to specify how you will receive the events notification of your camera either via using email or FTP You will need to enter all the relevant information for your email account or FTP settings Then click Next to continue Click Next D Link DCS 6410 User Manual
36. nly Hours Minutes Hours Minutes Sun Start 0 End 24 7 Mon Start o fe End 24 7 Tue start fo e End 24 W wed Start 0 End 24 Thu ahs End 24 Fri Start 0 e End 24 sat Stat o t End 24 3 Section 3 Configuration Snapshot Enable the Snapshot feature so that your camera can take snaphots and send it to your email address or FTP Server Enable Snapshot Trigger Event E mail Address FTP Server Host name Path Prefix Filename Port Passive mode Select to enable or disable snapshot event Select one or more of the events such as Motion Detection D I Signal 1 and D I Signal 2 for the source that triggers the action Select this option if you want to receive snapshot images via e mail Select this option if you want to receive your snapshot images via FTP The host name of your FTP server The directory or path where the images will be uploaded to for example pub images The prefix that will be added to the filename of each file The port of the FTP server The default port is 25 Some FTP servers allow clients to use passive mode when connecting to an FTP which uses random ports for transfers D Link DCS 6410 User Manual etup Vi In order to enable your camera to take snapshots you must select the checkbox of Enable S Vizard Helpful Hints You can choose to receive notifications by FTP and or S 10t Then you can
37. ns NETWORK PROTOCOL SUPPORT e TCP IP RTSP RTP RTCP HTTP SMTP FTP NTP DNS DHCP UPnP DDNS PPPoE ICMP Samba client 3GPP BUILT IN NETWORK INTERFACES e 10 100BASE TX Ethernet port VIDEO ALGORITHM SUPPORT e JPEG for still image e MPEG4 MJPEG dual format compression VIDEO RESOLUTION e 420 TV lines e Up to 30 frames at 704 x 480 352 x 240 176 x 120 NTSC e Up to 25 frames at 704x576 352x288 176x144 PAL VIDEO FEATURES e Adjustable image size and quality e Time stamp and text overlays e Configurable motion detection windows VIDEO ELECTRONIC SHUTTER e NTSC 1 60 1 100 000 sec e PAL 1 50 1 110 000 sec 3A CONTROL e AGC AWB AES VIDEO BIT RATE e 20K to 2M MIC Input Impedance e 4 4k Ohm D Link DCS 6410 User Manual AUDIO VIDEO OUT e Yes RESET BUTTON e Reset to factory default I O CONNECTOR e 2 Inputs Photo relay Active High Dropout 0 VDC e 1 Output photo relay Close circuit current AC 70mA or DC 100mA 400hm Open circuit voltage 240 VAC or 350VDC RS 485 e 2 pin 485A 485B Supported to control external Pan Tilt device SDRAM 64M FLASH MEMORY e 8 Mbytes AUDIO SAMPLE RATE e GSM AMR 12 20kbps PCM 8Kbps IR FUNCTIONS e IR Led Count 6 e IR distance up to 15M CAMERA SPECIFICATIONS e 1 3 SONY CCD SENSOR INTERLACE SCAN MODE e 0 1 lux F1 6 IR 0 lux e 4 3mm F1 6 52 Appendix B Technical Specifications LAN e IEEE 802 3 compliance e
38. ontinue Enable Server Address lt lt Select Dynamic DNS Server Host Name User Name Password Verify Password Timeout E 76 Hours ne Click Next Enter a name for your camera and click Next to D Link recommends that you rename your camera for easy accessibility You can then identify continue and connect to your camera via this name Please assign a name of your choice before clicking on the Next button Camera Name DES 5410 Gane Click Next D Link DCS 6410 User Manual 25 Section 3 Configuration Configure the correct time to ensure that all events will be triggered captured and scheduled at the right time renere ker rd ea ca adel Click Next to continue Time Zone GMT 08 00 Pacific Time US amp Canada Enable Daylight Saving Click Next You will see a summary of your camera s settings Below is a summary of your camera settings Click on the Back button to review or modify Please note down all thi S inform ation as you Will need settings or click on the Apply button if all settings are correct It is recommended to note down GE these settings in order to access your camera on the network or via your web browser it for accessing your camera within the network Click ee on Apply to activate your settings IP Camera Name DCS 6410 Time Zone GMT 08 00 Pacific Time US amp Canada DONS Disable PPPOE Disable Click Apply D Link DCS 6410 User Manual 26 Section 3 Co
39. ork and would like a dynamic IP address to be updated to your camera automatically You may obtain a static or fixed IP address and other network information from your network administrator for your camera A static IP address will aid you in accessing your camera in the future The fixed IP address The default value is 255 255 255 0 Used to determine if the destination is in the same subnet The gateway used to forward frames to destinations in a different subnet Invalid gateway settings may cause the failure of transmissions to a different subnet Primary domain name server that translates names to IP addresses Secondary domain name server to backup the primary DNS Enable this setting to allow your camera to be configured as an UPnP device in your network Network Setup Product DCS 6410 Firmware Version 1 00 DCS 6410 II LIVE VIDEO SETUP MAINTENANCE STATUS HELP Setup Wizard Helpful Hints Select DHCP Connection if you are running a DHCP server on your network and would like an IP address assigned to your camera automatically You can configure your LAN and Internet settings here Don t Save Settings Dynamic DNS Image Setup Audio and Video LAN SETTINGS Enabling UPnP settings will allow you to configure your camera as an UPnP device in the network Motion Detection DHCP Connection Static IP Address IP Address Subnet Mask Default Gateway Time and Date Recording Port Deta
40. orting TCP IP networking SMTP e mail HTTP and other Internet related protocols the DCS 6410 Network Camera can be integrated easily into other Internet Intranet applications because of its standards based features e Remote Snapshot Images Using the Snapshot feature you save snapshots directly from the Web browser to a local hard drive without installing any software making it convenient to instantly capture any moment from a remote location e Low Light Recording The light sensitivity allows you to capture video in rooms with minimal lighting making it ideal for use at night time e Web Configuration Using the Web browser administrators can configure and manage the Network Camera directly using the web browser via Intranet or Internet Up to 10 accounts with different settings can be created and controlled by the administrator e Powerful Surveillance and Remote Monitoring Utility An administrator is assigned with a pre defined user ID and password can modify the Network Camera settings from a remote site via Intranet or Internet Administrators are allowed to monitor the video image record the video image to a hard drive and take snapshots e Broad Range of Applications With today s high speed Internet the Network Camera provides the ideal solution for remotely monitoring live video images over the Intranet and Internet The DCS 6410 allows remote access using Internet Explorer or other web browser for live image viewing with audio
41. ou want to set a static address within your home network Enter the accurate information for your static IP setting Click Next to continue Please select whether your camera will connect to the Internet with a DHCP connection or Static IP address If your camera is connected to a router or you are unsure which settings to pick D Link recommends that you keep the default selection of DHCP connection Otherwise select Static IP address to manually assign an IP address before clicking on the Next button DHCP Connection Static IP Address IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Click Next If you are using PPPoE select Enable and enter your user name and password Click Next to continue Click Next D Link DCS 6410 User Manual If your ISP is using PPPoE please enable this setting and enter your ISP Username and Password Then click on the Next button Please contact your ISP if you do not know your Username and Password E Enabled Username e g 123456 hinet net Password 24 Section 3 Configuration If you have a Dynamic DNS account and would like your camera to update its IP address automatically Select OEE EEEE pE PE If you have a Dynamic DNS account and would like the camera to update the IP address Enable and enter your host information Click Next to automatically please enable DDNS and enter your host information below Then click on the Next button to continue c
42. s VIDEO PROFILE 1 Encode Type Resolution FPS bps 704X480 v 30 vw MPEG4 vw 1 Mbps VIDEO PROFILE 2 Encode Type Resolution FPS bps 352X240 30 MPEG4 v iMbps v VIDEO PROFILE 3 VIDEO PROFILE 4 FOR MOBILE DEVICE ONLY Encode Type Resolution FPS bps MPEG4 176X120 v 5 2 AUDIO SETUP Enable Speaker Volume Enable Microphone Volume JPEG Quality Standard w RTSP URL play 1 sdp RTSP URL play2 sdp RTSP URL play3 sdp JPEG Quality RTSP URL 3gpp Save Settings Don t Save Settings DCS 6410 II LIVE VIDEO SETUP MAINTENANCE STATUS HELP Helpful Hints FPS Frames per Second The amount of image frames rendered by the camera per second bps Bits per Second Higher value means a higher quality image but consumes more network bandwidth JPEG Quality Is the image quality level of JPEG images captured RTSP URL Is the URL used to connect to the camera when viewing from a mobile device or PDA i e rtsp XAMPLE dlinkddns com 3gpp Most cell phones only support small resolutions such as 176x120 and low bitrates We suggest using resolution of 176x120 at 5 FPS and 20k BPS to watch images on your cell phone or pda Enable Speaker will allow you to send audio from your PC s audio input to an external speaker connected to the camera Enable Microphone will allow you to listen to audio from the camera s microphone through your PC s audio output S
43. t supplies the IP address Enter the admin ID and password KE a SECURICAM Network Note By default Admin ID is admin and the password is left blank Set up an Admin ID and Password to secure your camera Click Next to continue Admin ID Password Change Change New ID oe New Password Reconfirm ge Reconfirm sep Back Next Exit Click Next D Link DCS 6410 User Manual 18 Section 3 Configuration Select DHCP if you want to obtain a new IP address every time the D Link camera boots up f em i Ta TVU a SECURICAM Network 192 168 1 185 255 255 255 0 192 168 1 1 192 168 1 1 192 168 1 1 Click Next Select static IP to use the same IP address at each boot up SECURICAM Network 192 168 0 102 255 255 255 0 192 168 0 1 192 168 0 1 192 168 0 1 SA Click Next D Link DCS 6410 User Manual 19 Section 3 Configuration Click Restart to save your settings and reboot the Network Camera Click Restart Click the button labeled Link to access the web configuration page The Setup Wizard will automatically open your web browser with the IP address of your DCS 6410 For example the IP address is http 192 198 0 20 Note Your DCS 6410 may have a different IP Address Click Link D Link DCS 6410 User Manual D Link Wizard Search Link About Exit 192 168 0 1 192 168 0 1 i DIE AM Natwnrk U SCURICAM Network EE Suhina ee EN 00 03 1b 5
44. to 158 F HUMIDITY e 20 to 80 non condensing EMISSION EMI SAFETY amp OTHER CERTIFICATIONS e FCC e CE e C Tick 93
45. ult You may reset your camera and restore the factory settings to your camera by clicking Restore Factory Defaults Reboot Device This will restart your camera D Link DCS 6410 User Manual Product DCS 6410 Firmware Version 1 00 men Jf rene Device Management Helpful Hints Backup and Restore After the factory s Here you may backup restore and reboot your camera Stad cola hae Firmware Upgrade been restored use the SYSTEM installation wizard software provided with your camera to search and connect to the camera Logout Save To Local Hard Drive Load From Local Hard Drive Restore To Factory Defaults Restore Factory Defaults Reboot Device 42 Section 3 Configuration Firmware Upgrade Your current firmware version and date will be displayed on your screen You may go to the D Link Support Page to check for the latest firmware version available To upgrade the firmware on your DCS 6410 please download and save the latest firmware version from the D Link Support Page to your local hard drive Locate the file on your local hard drive by clicking the Browse button Then open the file and click the Upload button to start the firmware upgrade Current firmware It will be automatically determined and version displayed by the system Current Product Will display the name of the existing Name product File Path Locate the file upgraded firmware on your hard drive by clicking
Download Pdf Manuals
Related Search