E Series 5-inch Network Speed Dome
Contents
1. circle is tolerable 224 J Figure 2 9 Draw and Cut a Hole on the Ceiling 5 Connect the cables The cables have been connected to the corresponding interfaces Connect the power cable and the red LED indicator turns on when the power is on Note Please turn the power off after checking the speed dome 6 Install the speed dome to the ceiling Steps 1 Loosen the two lock screws on both sides of the back box and make the locks in internal position as shown in the following figure Figure 2 10 Locks and Lock Screws 2 Push the speed dome into the mounting hole in the ceiling 3 Tighten the lock screws with the screwdriver and the locks will automatically rotate outwards to secure the in ceiling mount to the ceiling 11 E Series 5 inch Network Speed Dome Quick Guide Figure 2 11 Install the back box 7 Install the trim ring Steps 1 Attach the trim ring to the lower dome and align the triangular notch of the trim ring with the arrow label on the in ceiling mount 2 After having firmly placed the trim ring to the ceiling rotate the trim ring in the direction of arrow to secure the trim ringin place Notes Please remove the protective film on the lower dome after the installation is finished In order to obtain clear video images please wear the anti static gloves when you install the soeed dome Figure 2 12 Install the Trim Ring 2 3 Ceiling Mounting Before you start The2. INTERNECO SECURITY SOLUTIONS E Series 5 inch Network Speed Dome Quick Guide E Series 5 inch Network Speed Dome Quick Guide Thank you for purchasing our product If there are any questions or requests please do not hesitate to contact the dealer This manual applies to E Series 5 inch network speed dome This manual may contain several technical incorrect places or printing errors and the content is subject to change without notice The updates will be added to the new version of this manual We will readily improve or update the products or procedures described in the manual DISCLAIMER STATEMENT Underwriters Laboratories Inc UL has not tested the performance or reliability of the security or signaling aspects of this product UL has only tested for fire shock or casualty hazards as outlined in UL s Standard s for Safety UL60950 1 UL Certification does not cover the performance or reliability of the security or signaling aspects of this product UL MAKES NO REPRESENTATIONS WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT E Series 5 inch Network Speed Dome Quick Guide Regulatory Information FCC Information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protect
3. Overview Please turn the power off before connect the cables The cable interfaces of network speed dome are shown in following figure The cables are distinguished by different colors The labels attached on the cables are for identification fee 190 LE gt Ne Ne Pa NS A L aw A 4 33 j A J 2 IN a BE 3 tA ps a aie ti J NN J Figure 1 1 Overview Table 1 1 Overview Wo eseription Power Cables Audio Input Output Cables Network Cable E Series 5 inch Network Speed Dome Quick Guide 2 Installation Before you start Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included Note Do not drag the speed dome with its waterproof cables as shown in Figure 2 1 otherwise the waterproof performance is affected k 1 na Figure 2 1 Do Not Drag the Cables 2 1 Wall Mounting Steps 1 Loosen the two lock screws as shown in the following figure 2 Remove the lower dome Lower Dome Figure 2 2 Disassemble the Speed Dome 3 Remove the protective lens cover foam and sticker as shown in the following figure 4 Install the lower dome back and tighten the two lock screws E Series 5 inch Network Speed Dome Quick Guide Fig
4. admin account of the device in the Password field and click to save the changes 17 E Series 5 inch Network Speed Dome Quick Guide Total number of online devices 1 Refresh io Device Type IPW Address Port Software Version iPv4 Gateway Serial No u I _ ___ _ _ ________ ff 001 MLBIIIOHR 192 0 0 64 8000 V500bu d 130806 0 0 0 0 I7 814304R0120130323CCR Pi Figure 3 3 Select a Device Modify Network Parameters IP Address 192 168 1 20 Port 8000 SubnetMask 255 255 2550 IPv4 Gateway 192 168 1 1 IPv6 Address IPv6 Gateway IPV6 Prefix Length 54 Serial No 120130323CCRR418890649 l sece u Save Note Enter the admin password of the device before you save the network parameters Figure 3 4 Modify Network Parameters 3 Enter the IP address of speed dome in the address field of the web browser to view the live video Notes The default value of the IP address is 192 0 0 64 The default user name of administrator is admin and password is 12345 For accessing the network speed dome from different subnets please set the gateway for the network speed dome after you log in 18 E Series 5 inch Network Speed Dome Quick Guide 4 Accessing via Web browser System Requirement Operating System Microsoft Windows XP SP1 and above version Vista Win7 Server 2003 Server 2008 32bits CPU Intel Pentium IV 3 0 GHz or higher RAM 1G or higher Display 1024x768 reso
5. al Area Network you need to connect the network speed dome in the same subnet with your PC Then install the SADP or client software to search and change the IP of network speed dome The following figure shows the cable connection of network speed dome PC ER Speed Dome Switch net lt t w NVR Figure 3 1 Wiring over LAN Set the IP address of the speed dome for accessing via LAN Steps 1 To get the IP address you can choose either of the following methods CL Use SADP a software tool which can automatically detect network speed dome in the LAN and list the device information like IP address subnet mask port number device serial number device version etc shown in Figure 3 2 O Use client software to list the online devices Please refer to the user manual of client software for detailed information 2 Change the IP address and subnet mask to the same subnet as of your PC Refer to the following introductions to set IP address with SADP software Q Search active devices online Search online devices automatically After launch the SADP software it automatically searches the online devices every 15 seconds from the subnet where your computer locates It displays the total number and information of the searched devices in the Online Devices interface Device information including the device type IP address port number gateway etc will be displayed 16 E Series 5 inch Network Speed Dome Qu
6. ection label of pendant adapter with the label of the back box to install the speed dome as shown below Figure 2 6 Align the Labels 12 Rotate the back box clockwise tightly Secure the back box and the pendant adapter with the two lock screws E Series 5 inch Network Speed Dome Quick Guide Lock Screwe _ Figure 2 7 Tighten the Lock Screws 2 2 In ceiling Mounting Before you start The in ceiling mounting is applicable to the indoor ceiling construction The followings are the mandatory precondition for mounting The height of the space above the ceiling must be more than 250mm The thickness of the ceiling must ranges from 5 to 40mm The ceiling must be strong enough to withstand more than 4 times the weight of the dome and its accessories Steps 1 Rotate the lower dome counterclockwise to separate it from the back box as shown in Figure 2 8 2 Remove the protective lens cover foam and sticker from the dome drive 3 Attach lower dome to the back box and rotate clockwise to secure it F Foam Lower Dome Figure 2 8 Remove the Protective Accessory 4 Drill a hole on the ceiling according to the drill template supplied 10 E Series 5 inch Network Speed Dome Quick Guide Note 2mm of the diameter of the
7. ick Guide 9 otal number of online devices E Retesh oe Mio oa Network Parameter Device Type Pvt Address Pon Sofware version IP Gateway Serial N eS ess 7 C81430iR 1920084 8000 V5 0 Geulld 130606 0000 17 C814304R012013023CCR Pot Soret Mask IPs Gateway iPv6 Address Pv6 Gateway PO Prefix Lengt lt Note Enter re adun password of the Gevice before you Save the network parameters Note Senai code is a series of Characters CP combines dy ne start tme and he senai nur of he device Figure 3 2 Searching Online Devices Note Device can be searched and displayed in the list in 15 seconds after it goes online it will be removed from the list in 45 seconds after it goes offline Search online devices manually You can also click Risch to refresh the online device list manually The newly searched devices will be added to the list Note You can click or on each column heading to order the information you can click to show the device table and hide the network parameter lt panel on the right side or click to show the network parameter panel CL Modify device information Steps 1 Select the device to be modified in the device list as shown in Figure 3 3 The network parameters of the device will be displayed in the Modify Network Parameters panel on the right side as shown in Figure 3 4 2 Edit the modifiable network parameters e g IP address and port number 3 Enter the password of the
8. ion against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement This product and if applicable the supplied accessories too are marked with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 2011 65 EU 2012 19 EU WEEE directive Products marked with this symbol cannot be X disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of a equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a batte
9. lution or higher Web Browser Internet Explorer 7 0 and above version Apple Safari 5 02 and above version Mozilla Firefox 3 5 and above version and Google Chrome8 and above version Steps 1 Open the web browser 2 In the browser address bar input the IP address of the network speed dome e g 192 0 0 64 and press the Enter key to enter the login interface 3 Input the user name and password 4 Click Login User Name Password Figure 4 1 Login Interface 5 Install the plug in before viewing the live video and managing the network speed dome Please follow the installation prompts to install the plug in Note You may have to close the web browser to finish the installation of the plug in 19 E Series 5 inch Network Speed Dome Quick Guide Live View Playback Log Configuration x 4 3 Please click here to download and install the plug in Close the browser when installing the plug in Message from webpage Ea New version of plug in is detected Update it Figure 4 2 Download Plug in o x Setup Web Components Setup has finished installing Web Components on your computer Click Finish to exit Setup Figure 4 3 Install Plug in 6 Reopen the web browser after the installation of the plug in and repeat the above steps 2 4 to login Note For detailed instructions of further configuration please refer to the user manual of network speed dome 20
10. mear may occur otherwise which is not a malfunction however and affecting the endurance of sensor at the same time Please use the provided glove when open up the dome cover avoid direct contact with the dome cover because the acidic sweat of the fingers may erode the surface coating of the dome cover Please use a soft and dry cloth when clean inside and outside surfaces of the dome cover do not use alkaline detergents Please keep all wrappers after unpack them for future use In case of any failure occurred you need to return the speed dome to the factory with the original wrapper Transportation without the original wrapper may result in damage on the speed dome and lead to additional costs E Series 5 inch Network Speed Dome Quick Guide Table of Contents LIOVERVIEW ee ee ren een 6 2 INStal a ON an convene sie nsssesanataacasees seatwonanoneusaasvorenesanenveneas 7 Z ANY all MOUNN asian 7 2 2 In ceiling MOUNTING ccsecccsecccsecccaeccaeccaeccesecsesecseesseessueessesesssessesesaseses 10 2 3 Celine MOUNN C euere 12 2 3 1 Wiring For Ceiling Mounting Applications u0222002220022nnenenn nennen nenn 13 23 2 MOUNU cS cece shee er ee er neuere 13 3 Setting the Dome over the LAN sccsccssccsccesccscesccssceccesccscceccescncceccess 16 4 ACCESSING via Web browser cccccsccsccecccsccsccnccnccesccsccnccescsccnccescesscncceses 19 E Series 5 inch Network Speed Dome Quick Guide 1
11. ole 6 Secure the mounting base to the ceiling with set screws Screw Holes Figure 2 15 Mark the Screw Positions If the speed dome is installed to the wooden wall use the self tapping screws to secure the mounting base If the dome is installed to the cement wall drill three O5 mounting holes onto the wall according to the hole locations and then insert the cement screws into the holes and finally use self tapping screws to secure the mounting base to the wall 7 Install the speed dome to the mounting base Steps 1 Route the cables for the speed dome Align the bottom of the speed dome with the mounting base 2 Line up the direction of arrow with the spring end of the mounting base 3 Push the speed dome upwards and then forwards in the direction of arrow When the speed dome is placed in position the spring will automatically snap into the lock clip firmly Refer to the following figure 14 E Series 5 inch Network Speed Dome Quick Guide Push forwards A OPush upwards Spring Lock m Figure 2 16 Attach the Back Box to the Mounting Base Notes Please remove the protective film on the lower dome after the installation is finished Do not touch the bubble of the lower dome directly by hand The image blurs otherwise 15 E Series 5 inch Network Speed Dome Quick Guide 3 Setting the Dome over the LAN To view and configure the speed dome via LAN Loc
12. ry that cannot RX be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier orto a designated collection point For more information see www recyclethis info E Series 5 inch Network Speed Dome Quick Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss The precaution measure is divided into Warnings and Cautions Warnings Neglecting any of the warnings may cause serious injury or death Cautions Neglecting any of the cautions may cause injury or equipment damage Warnings Follow Cautions Follow these these safeguards to precautions to prevent prevent serious potential injury or injury or death material damage A Warnings All the electronic operation should be strictly compliance with the electrical safety regulations fire prevention regulations and other related regulations in your local region Please use the power adapter which is provided by normal company The standard of the power adapter is 24VAC 10 or 12VDC 10 depending on models The power consumption cannot be less than the required value Do not connect several devices to one power adapter as adapter overload may cau
13. se over heat or fire hazard Please make sure that the power has been disconnected before you wire install or dismantle the speed dome When the product is installed on wall or ceiling the device shall be firmly fixed If smoke odors or noise rise from the device turn off the power at once and unplug the power cable and then please contact the service center If the product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the speed dome yourself We shall not assume any responsibility for problems caused by unauthorized repair or maintenance A Cautions Do not drop the dome or subject it to physical shock and do not expose it to high electromagnetism radiation Avoid the equipment installation on vibrations surface or places subject to shock ignorance can cause equipment damage Do not place the dome in extremely hot cold dusty or damp locations otherwise fire or electrical shock will occur The operating temperature should be 30 C 65 C outdoor speed dome and 10 C 50 C indoor speed dome The dome cover for indoor use shall be kept from rain and moisture 3 E Series 5 inch Network Speed Dome Quick Guide Exposing the equipment to direct sun light low ventilation or heat source such as heater or radiator is forbidden ignorance can cause fire danger Do not aim the speed dome at the sun or extra bright places A blooming or s
14. thickness of the ceiling must ranges from 5 to 40mm 12 E Series 5 inch Network Speed Dome Quick Guide The ceiling must be strong enough to withstand more than 4 times the weight of the dome and its accessories 2 3 1 Wiring For Ceiling Mounting Applications The cables of dome can be routed either from the top or the side of the back box as shown in Figure 2 13 For the cables routed from the top of the back box it is required to drill a cable hole in the ceiling E I DD Figure 2 13 Cabling for Ceiling Mounting 2 3 2 Mounting Before you start If the speed dome is installed to the wooden wall use the self tapping screws to secure the mounting base if the dome is installed to the cement wall drill three 5 screw holes onto the wall according to the hole locations and then secure the mounting base to the wall with expansion screws Steps 1 Rotate the lower dome counterclockwise to separate it from the back box 2 Remove the protective lens cover foam and sticker from the dome drive ah Foam Back Bo Sticker 1 Lower Dome N E 7 Ne Figure 2 14 Remove the Protective Accessory 3 Attach lower dome to the back box and rotate clockwise to secure it 4 Use the mounting base as a template to mark four screw holes onto the ceiling 13 E Series 5 inch Network Speed Dome Quick Guide 5 If you route cables from the top of the back box mark the cable hole on the ceiling and drill a h
15. ure 2 3 Disassemble the Speed Dome 5 Drill four M8 screw holes on the wall according to the screw holes of the wall mount 6 Secure the wall mount to the wall with screws Notes For cement wall mounting you need to use the expansion screw to fix the mount The mounting hole of the expansion pipe on the wall should align with the mounting hole on the mount For wooden wall mounting you can just use the self tapping screw to fix the bracket Please make sure that the wall is strong enough to withstand more than 8 times the weight of the dome and the mount Nuts and Washers V mM D E _ E ee y ne y Ta Expansion Screws iin N pn SEEN i gt o E m Figure 2 4 Install the Wall Mount 7 Wrap the thread part with the thread tape and rotate the pendant adapter to the wall mount 8 Secure the pendant adapter to the wall mount with a set screw as shown in Figure 2 5 E Series 5 inch Network Speed Dome Quick Guide 9 Loosen the lock screws of the adapter gt g Top View ot Pendant N AR Je Pendant Adapter 0 Adapter Ja gt Lock Screw Lock Strew Figure 2 5 Install the Pendant Adapter Note The dimension of pendant adapter is G1Btad 10 Hook the two ends of the safety rope to the back box of the speed dome and the wall mount respectively Route the cables through the mount 11 Align the dir
Download Pdf Manuals
Related Search