Manual - Proscale
Contents
1. GHT 332 allows you adjust the default settings of the scale Backlight Setting 1 Make sure the scale is turned off Press and hold HOLD and turn on the scale release when the display shows L ON or L OFF 2 Press UNIT to toggle the backlight setting ON backlight is on or OFF backlight is disabled 3 Press HOLD to confirm and enter auto off setting mode Auto off 4 The display will show A ON or A OFF 5 Press UNIT to toggle the auto off setting ON enabled auto 2 mins default or OFF disable 6 Turn the scale OFF and ON to return to normal weighing mode Display Messages Capacity 150kg x 100g 332Ib x 0 2Ib EEEEE Overload Unit kg lb oz Ib st Battery Low Tare Range Full capacity Auto Off 2 minutes Op Temp Optimum 10 40 C 50 104 f Power Source 6 0v 100 mA AC Power adaptor 3 x AAA Batteries Platform Dimension 315mm x 325mm Scale Weight 5 0kg www proscale net CE K2. Press the UNIT key to change the weighing unit between kg lb oz Ib and stone 2 Press the ZERO TARE key to TARE or Zero the scale 3 Press HOLD to store a weight value Press HOLD again to clear Tare Zero Tare can be used for eliminating the weight value of an empty container Place an empty container on the scale and press TARE ZERO Then place the items to be weighed in the container NOTE When all weight is removed from the weighing tray the tared value of a container will be displayed as a negative number Press TARE ZERO again to return the scale to zero CALIBRATION Calibration may be required when the scale is first set up for use or if the scale is moved to a different altitude or new location This is necessary because the weight of a mass in one location is not necessarily the same in another location Also with time and use mechanical deviations can occur How to calibrate you must have an accurate 75kg weight in order to calibrate 1 Make sure the scale is turned off Press and hold ZERO do not release and turn on the scale release when the display shows the A D value a series of random numbers 2 Press UNIT the display will show the CAL and then the correct calibration weight 75 00 3 Place the correct calibration weight on the platform and wait 5 seconds The display will show PASS and then return to normal weighing mode 4 Calibration is complete SCALE SET UP The PROFREI
3. dl KIGE PROFREIGIT 332 USER MANUAL PROFREIGHT 332 NA USER MANUAL ASS Thank you for purchasing a PROSCALE PROFREIGHT 332 the heavy duty shipping scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service POWER SUPPLY The PROFREIGHT 332 was designed to run with AC power AC adapter included or optional 3 x AAA batteries The AC adaptor plugs into the socket on the rear of the scales weighing indicator If you want to use batteries please install them in the battery compart ment on the underside of the base of the scale Battery Installation For battery installation turn over the scale you ll see the battery compartment on the underside of the base of the scale lift and open the battery cover remove and or install the batteries Be sure that the batteries are installed correctly following the polarity indicators in the battery compartment Reinstall the battery cover OPERATION INSTRUCTIONS Only operate the scale on a flat level surface that is stable and durable enough to support the scale and the items being placed on the scale Place the indicator away from the scale at a position that is easy to read Weighing Procedures Press the ON OFF Ito turn ON OFF the scale The display will show 0 00 The scale is now ready for use To begin weighing follow these steps 1
Download Pdf Manuals
Related Search