User manual Dishwasher
Contents
1. operates Finished The indicator light comes on when the washing pro gram is completed Rinse Aid The indicator light comes on when it is necessary to fill the rinse aid container Refer to Use of rinse aid The indicator light is off while a washing program op erates Button Lock Comes on when the Button Lock function is active Button Lock The Button Lock function can be set only after a K The Button Lock function locks all buttons on the control washing programme starts It is not possible to panel while the washing program is in operation set this function with the delay start Follow these steps to set the Button Lock function 1 Switch on the appliance 2 Seta washing program 3 Startthe washing program 4 Press Button Lock for approximately 5 seconds or until the Button Lock indicator light flashes 5 Button Lock indicator light flashes for approximate ly 15 seconds 6 When Button Lock function is active the indicator light is on with a static light If you press a button while Button Lock function is on the digital display shows CL to inform you that the but tons are locked Atthe end of a washing program the Button Lock func tion is deactivated by opening and closing the door or switching off the appliance Important It is not possible to deactivate the Button Lock function while a washing program is in progress To do this you must cancel the set program Refer to Select and start a washing progr2. upper basket Make sure that the items do not move Caution Make sure that the spray arms can move freely before you start a washing program Warning Always close the door after you load or unload the appliance An open door can be dangerous NN ka fm Lf LS Arrange service dishes and large lids around the edge of the lower basket The rows of prongs in the lower basket can be ad justed flat to load pots pans and bowls Use the cutlery grid for best washing results If the di mensions of the cutlery prevent use of the cutlery grid remove it Arrange the items to let water touch all surfaces For longer items fold the cup racks up Prevent to put plates in the first three sectors in the front part of the basket Make sure the plates tilt forward Adjustment of the height of the upper basket If you put large plates in the lower basket first move the upper basket to a upper position Follow these steps to move the upper basket to the lower position Maximum height of the dishes upper basket lower basket 1 Pullthe basket out until it stops Upper position 20cm 31 cm 2 Carefully lift the two sides upwards Lower position 24cm 27 cm 3 Hold the mechanism and guide it back down slow ly Follow these steps to move the upper basket to the A Caution upper
3. ICE SERVICE NEW ZEALAND FOR SPARE PARTS OR TO FIND THE ADDRESS OF 4 Electrolux OR TO FIND THE ADDRESS OF YOUR NEAREST AUTHORISED ELECTROLUX HOME PROD YOUR NEAREST SPARE PARTS SERVICE CENTRE IN NEW ZEA ycts CENTRE IN NEW ZEALAND LAND Free call 0800 10 66 20 Free call 0800 10 66 10 New Zealand only 20 New Zealand only www electrolux com www dishlex com au 156987653 03 1 12008 dishlex C
4. am Delay start button Use the delay start button to delay the start of the washing program with an interval between 1 and 19 hours Refer to Select and start a washing program Digital display The display shows program duration remaining time to the end of the program endofa washing program number of hours in delay start fault codes Button Lock function The digital display shows CL when this function is active Setting mode The appliance is in setting mode when all the program indicator lights are on The appliance must be in setting mode to set a washing program If a program indicator light is on cancel the program to go back to the setting mode Refer to Select and start a washing program Washing programs Washing programs Degree of soil Type of load Program description Pots Heavy soil Auto 1 Any Quick 30 2 Normal or light soil Regular Eco 3 Normal soil Rinse amp Hold Any Crockery cutlery pots and pans Crockery cutlery pots and pans Crockery and cutlery Partial load Crockery and cutlery Partial load to be completed later in the day Prewash Main wash up to 70 C 2 intermediate rinses Final rinse Drying Prewash Main wash up to 50 C or 65 C 1 or 2 intermediate rinses Final rinse Drying Main wash up to 60 C Final rinse Prewash Main wash up to 50 C 1 intermediate rinse Final rinse Drying 1 cold rinse to prevent
5. dishlex 4 gt User manual J Doa 4 P N b 4d N Dishwasher d p S 4 P N DX 301 Contents Safety information Control panel Washing programs Use of the appliance Use of rinse aid Loading cutlery and dishes Use of detergent Select and start a washing program 1 ONNN DFP A Safety information For your safety and correct operation of the ap pliance read this manual carefully before instal lation and use Always keep these instructions with the appliance even if you move or sell it Users must fully know the operation and safety features of the appli ance Correct use Only use the appliance to clean household utensils that are suitable for dishwashers Do not put solvents in the appliance Risk of explo sion Putthe knives and all items with sharp points in the cutlery basket with their points down If not putthem in a horizontal position in the upper basket Useonly products specified for dishwashers deter gent salt rinse aid f you open the door while the appliance is in oper ation hot steam can escape Risk of skin burns Do not remove dishes from the dishwasher before the end of the washing program When the washing program is completed discon nectthe mains plug from the mains socket and close the water tap Only an authorised service
6. ect power supply v incomplete or improper installation vi incorrect improper or inappropriate opera tion vii insect or vermin infestation The Appliance is modified without authority from Electrolux in writing The Appliance s serial number or warranty seal has been removed or defaced The Appliance was serviced or repaired by anyone other than Electrolux or its Authorised Service Centres This warranty the contract to which it relates and the relationship between you and Electrolux are 19 governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand Where the Ap pliance was purchased in New Zealand for busi ness purposes the Consumer Guarantee Act does not apply Limitation of Liability in the case of Appliances at its option to the replacement or repair of the Appliances or the supply of equivalent products or the payment ofthe costofreplacing the Appliances or having the Appliances repaired or of acquiring equiv alent Appliances Upon being replaced parts and Appliances become the property of Elec trolux or 10 Tothe extent permitted by law inthe case of services at its option to the sup Electrolux excludes all warranties other than as ply of the services again or the payment of the contained in this document cost of having the services re supplied Electrolux shall not be
7. en worktop Make sure that the dimensions ofthe recess agree with the given dimensions e Water connection Water inlet hose Connect the appliance to a cold water supply Connect the inlet hose to a water tap with an external BSP thread spout of 3 4 Inlet water supply Cold water pressure 800 kPa max 50 kPa min Water flow rate 10 L minute min 16 Adjusting the level of the appliance Make sure that the appliance is level to close and seal the door correctly Ifthe level ofthe appliance is correct the door does not catch on the sides of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the appliance is level Adhesive steam protection foil If the worktop is removed fit the steam protection onto the front part of the kitchen cabinet benchtop The steam protection foil is not supplied with free standing models but can be purchased from Electrolux Spare Parts f cold water pressure is in excess of 800 kPa a pressure reducing valve should be used Check for leaks Caution Always use new hoses when you connect the appliance to the water mains Old hoses must not be used The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary The water pressure must be in the limits refer to Tech nical data Make sure that the local water authority gives you the average mains p
8. engineer can repair this appliance Use only original spare parts Do not do repairs yourself to prevent injury and damage to the appliance Always contact the Cus tomer Care Centre General safety Dishwasher detergents are very dangerous Be careful they do nottouch eyes mouth and skin Keep gt Care and cleaning What to do if Technical data Environment concerns Installation Water connection Electrical connection Warranty gt gt gt gt gt gt x O YX O O OOM WM Subject to change without notice the children away from the appliance when the door is open Obey the safety instructions from the manufacturer of the dishwasher detergent to prevent burns to eyes mouth and throat Only put detergent in the dispenser before you start a washing program Make sure that the detergent dispenser is empty at the end of the washing pro gram Do not drink the water from the dishwasher Deter gent residues can stay in your appliance Always close the door when you do not use the ap pliance to prevent injury and not to stumble over the open door Do not sit or stand on the open door Child safety Children or infirm persons must not use this appli ance They must get supervision to make sure that they do not play with the appliance Keepallthe packaging away from children There is a risk of suffocation Keepalldetergents in a safe area Do no
9. food scraps to bond Detergent is not necessary with this program 1 During the Auto program the soil level of the dishes is given by how cloudy the water is The program duration and consumptions can change This depends if the appliance is fully or not and on the level of soil on the dishes The appliance adjusts automatically the temperature of the water during the main wash 2 This is the perfect daily program to clean a partial load Ideal for a family of 4 persons who only want to load breakfast and dinner crockery and cutlery 3 Test program for test institutes Please refer to separate leaflet supplied for test data Consumption values Energy in kWh Water in litres Pots 1 8 2 0 Auto 1 1 1 8 Quick 30 0 9 Regular Eco 0 8 0 88 Rinse amp Hold 0 1 1 The display shows the program duration 12 25 12 25 9 11 12 4 The pressure and temperature of the water the variations of power supply and the quantity of dishes can change these values Use of the appliance Refer to specified instructions for each step of the pro cedure 1 Fill the rinse aid dispenser with rinse aid 2 Load cutlery and dishes into the dishwasher 3 Set the correct washing program for the type of load and soil Use of rinse aid Caution Only use rinse aid specified for dishwashers Follow these steps to fill the rinse aid dispenser Loading cutlery and dishes Hel
10. liable for any loss or and in the case of Appliances or services supplied damage whether direct or indirect or conse in New Zealand loss or damage whether direct or quential arising from your purchase use or indirect or consequential that is reasonably fore non use of the Appliance Bs seeable heiraten the Tade Practice sC and a Yo io that in the event that you make a consumer legislation in Australia and the Con warranty claim it will be necessary for Electrolux and is ys dcl i nn E H 2 ris E ang its Authorised Service Centres to exchange information e ar racing Actin New Zea ana IMply war in relation to you to enable Electrolux to meet its obli ranties or conditions or impose obligations upon gations under this warranty Electrolux which cannot be excluded restricted or Important Notice ae im x ea Walden Before Calling a Service Technician please check care RA the Appliance ba a supplied by fully the operating instructions service booklet and the Electrolux shall be limited where it is fair and rea wangan arme ano conditions sonable to do so FOR SERVICE SERVICE AUSTRALIA FOR SPARE PARTS OR TO FIND THE ADDRESS OF W Electrolux OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SERV ELECTROLUX HOME PROD YOUR NEAREST STATE SPARE ICE CENTRE IN AUSTRALIA UCTS PARTS CENTRE IN AUSTRALIA Please call 13 134 9 Please call 13 13 50 For the cost of a local call Australia only For the cost of a local call Australia only FOR SERV
11. ning parts of soil with a cocktail stick External cleaning Clean the external surfaces of the appliance and con trol panel with a damp soft cloth Only use neutral de tergents Do not use abrasive products scouring pads or solvents acetone etc Internal cleaning Doan inspection at intervals of 3 months Set a washing program for heavily soiled dishes Use detergent but do not put dishes in the appliance Long periods of non operation Do these steps when you do not use the appliance for a long period 1 Disconnect the mains plug from the mains socket 2 Close the water tap 3 Keep the door open to prevent unpleasant smells 4 Keep the inner side of the appliance clean Frost precautions Caution Do not install the appliance where the temperature is below 0 C The manufacturer is not responsible for damage because of frost If not possible empty the appliance and close the door Disconnect the water inlet hose and remove water from the water inlet hose Disconnect the mains plug from the mains socket Close the water tap Remove the appliance and the hoses Do not tilt the appliance during transport Po m Moving the machine Do these steps to move the appliance What to do if The appliance does not start or stops during operation A Warning Switch the appliance off before you do If there is a fault first try to find a solution to the problem the suggested corrective actions yourself Refer to f
12. ollowing charts If you cannot find a solution to the problem yourself contact your dealer or the Customer Care Centre Fault code and malfunction Possible cause and solution the digital display shows 7 The water tap is blocked or restricted with limescale The appliance does not fill with water Clean the water tap The water tap is closed Open the water tap The filter in the water inlet hose is blocked Clean the filter The installation of the water inlet hose is not correct The hose can be kinked or squashed Make sure that the installation is correct the digital display shows C J There is a blockage in the sink spigot The appliance will not drain Clean the sink spigot The installation of the water drain hose is not correct The hose can be kinked or squashed Make sure that the installation is correct the digital display shows 3 7 Close the water tap and contact your Customer Care Centre The anti flood device operates The program does not start The appliance door is not closed Close the door Mains plug is not connected Plug in appliance to the mains The fuse has blown out in the household fuse box Replace the fuse Delay start is set Cancel the delay start to start the program immediately After the check switch on the appliance The program These data are necessary to help you quickly and cor continues from the point of interruption If the malfunc rectly tion sho
13. ould you require serv ice for your Electrolux appliance General Terms and Conditions 1 In this warranty Electrolux means Electrolux Home Products Pty Ltd ABN 51 004 762 341 in respect of Ap pliances purchased in Australia and Electrolux NZ Limited in respect of Appliances pur chased in New Zealand Appliance means any Electrolux product pur chased by you accompanied by this document Warranty Period means i where you use the Appliance for personal domestic or household purposes in Australia the period of 24 months and in New Zealand the period of 24 months ii where you use the Appliance for commercial purposes in Australia the period of 0 months and in New Zealand the period of 0 months if the period stated is 0 months you are not cov ered by this product warranty following the date of original purchase of the Appliance you means the purchaser of the Appliance not having purchased the appliance for re sale and your has a corresponding meaning This warranty only applies to Appliances pur chased and used in Australia or New Zealand and is in addition to and does not exclude restrict or modify in any way any non excludable statutory warranties in Australia or New Zealand Electrolux warrants that when dispatched from an Electrolux warehouse the Appliance is free from defects in materials and workmanship for the War ranty Period During the Warranty Period Electrolux or its Au tho
14. pful hints and tips Caution Only use the appliance for household utensils that are suitable for dishwashers Do not use the appliance to clean objects that can ab sorb water sponges household cloths etc 4 Fill the detergent dispenser with the correct quan tity of detergent 5 Start the washing program Caution Do not fill the rinse aid dispenser with other products e g dishwasher cleaning agent liquid detergent There can cause damage to the appliance Adjusting the rinse aid dosage The rinse aid is set at the factory at position 3 To increase or decrease the dosage refer to What to do if Wash hands to remove any residue of rinse aid from skin Before you load cutlery and dishes do these steps Remove all food remainings and debris Make burnt remaining food in pans soft While you load cutlery and dishes do these steps ret as Load hollow items e g cups glasses and pans with the opening down Make sure that water does not collect in the con tainer or in a deep base Make sure that cutlery and dishes do not lie inside one another Make sure that cutlery and dishes do not cover other cutlery and dishes Make sure that glasses do not touch other glasses Put small objects in the cutlery basket Plastic items and pans with non stick coatings can ain water droplets Plastic items do not dry as well porcelain and steel items Put light items in the
15. pleted the washing program starts automatically With the delay start function set the Washing in dicator light goes off Once the countdown of the delay start has ended the washing program will start automatically and the Washing indicator light comes on If you open the door during the countdown this will interrupt the countdown When you close the door again the countdown continues from the point of interruption Cancelling delay start 1 Press and hold approximately for 3 seconds the two buttons above the word Cancel until all the program lights come on When you cancel delay start you also cancel the washing program 2 Seta new washing program IN Warning Only interrupt or cancel a washing program if necessary Attention Open the door carefully Hot steam and water can escape Interrupting a washing program Open the door The program stops Close the door The program continues from the point of interruption Cancelling a washing program 1 Press and hold approximately for 3 seconds the two buttons above the word Cancel until all the program lights come on 2 Releasethe two buttons the washing program has been cancelled At this point you can follow these steps 1 Switch off the appliance 2 setanew washing program Fill the detergent dispenser with detergent before you set a new washing program End of the washing program The washing program is complete when The di
16. position Donotlift or lower the basket on one side only Ifthe basket is in the upper position do not put cups on the cup racks 1 Pull the basket out until it stops 2 Carefully lift the two sides until the mechanism is engaged and the basket is stable Use of detergent Only use detergents powder liquid or tablet that are suitable for dishwashers Follow the data on the packaging dosage recommended by the manufacturer storage recommendations Do not use more than the correct quantity of de tergent to decrease pollution Fill the detergent dis If you use a washing pro penser A with deter gram with prewash gent phase put more deter gent in the prewash de tergent compartment B Different brands of detergent dissolve in different times Some detergent tablets do not have the best cleaning results during short washing programs Use long washing programs when you use detergent tablets to fully remove the detergent Use of combi detergent tablets These products are detergents with a combined clean ing and rinsing functions They can contain also other cleaning agents 10 Refer to the instructions from the manufacturer for the use of these products With tablets that contain rinse aid setthe lowest position for the rinse aid dosage donotputrinse aid in the rinse aid dispenser In this condition rinse aid indicator light is alwa
17. ressure in your area Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entan gled Fit the hose nut correctly to prevent water leaks A Caution Do not connect the appliance to new pipes or pipes that have been not used for a long time Let the water run for some minutes then connect the inlet hose Water drain hose The highest point of the drain hose must be no more than 60 cm from the floor and must have a continuous fall The drain hose can be lengthened using additional lengths and connectors These must be purchased from Electrolux Spare Parts The extension length must not exceed 2 metres The drain hose must be free of kinks and obstructions Remove the sink plug when the appliance drains the water to prevent that the water goes back into the ap pliance If you connect the water drain hose to a trap spigot under the sink remove the plastic membrane If you do not remove the membrane remaining food can cause a blockage in the drain hose spigot Remove entire internal membrane Electrical connection Warning Safety standards require the appliance to be earthed Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate The appliance has a security feature to prevent dir
18. rised Service Centre will at no extra charge if your appliance is readily accessible without spe cial equipment and subject to these terms and conditions repair or replace any parts which it considers to be defective You agree that any re placed Appliances or parts become the property of Electrolux This warranty does not apply to light globes batteries filters or similar perishable parts Parts and Appliances not supplied by Electrolux are not covered by this warranty Where you are within an Electrolux service area this warranty covers the cost of transport of the Appliance to and from Authorised Service Centres of Electrolux and travelling costs for representa tives of the Authorised Service Centre to and from your home or business If you are outside an Elec trolux service area you will bear these costs For information about whether you are within an Elec trolux service area please phone 13 13 49 in Australia or 0800 10 66 10 in New Zealand Proof of purchase is required before you can make a claim under this warranty You may not make a claim under this warranty unless the defect claimed is due to faulty or de fective parts or workmanship Electrolux is not li able in the following situations which are not ex haustive The Appliance is damaged by i accident ii misuse or abuse including failure to properly maintain or service iii normal wear and tear iV power surges electrical storm damage or incorr
19. splay shows 0 The Finished indicator comes on 1 Switch off the appliance 2 Openthe door For better drying results keep the door ajar for some minutes before you remove the dishes Letthe dishes cool down before you remove them from the appliance Hot dishes are easily damaged Removing the load First remove items from the lower basket then from the upper basket 11 There can be water on the sides and door of the appliance Stainless steel becomes cool more quick ly than the dishes Care and cleaning Warning Switch the appliance off before you clean it Cleaning the filters Important Do not use the appliance without the filters Make sure that the installation of the filters is correct Incorrect installation will cause unsatisfactory washing results and damage to the appliance C lt Ad 7 lt Fully clean the filters A B and C below running wa ter Remove the flat filter A fromthe bottom ofthe ap pliance To remove filters B and C turn the handle ap proximately 1 4 anti clockwise 12 Put the filter A in the bot tom of the appliance In stallthe flat filter correctly under the two guides D Put the filter system in po sition To lock the filter system turn the handle clockwise until it locks in position Important Do not remove the spray arms If the holes in the spray arms become clogged remove remai
20. t gt PS lt etc Discard the packaging materials in the applicable container at the community waste disposal facilities Warning To discard the appliance follow the procedure Pull the mains plug out of the socket Cut off the mains cable and mains plug and discard them Discard the door catch This prevents children clos ing themselves inside the appliance and endanger ing their lives 596 850 610 Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door 50 kPa 7 psi 800 kPa 116 psi 12 Old appliance Make sure that the appliance goes to the applicable collection point for recycling Make sure that this appliance is discarded correctly Inappropriate waste discard of the appliance causes negative consequences for the environment and hu man health For more information about the recycling of this appli ance contact your local city office your household waste disposal service or the shop where you pur chased the appliance 15 Installation Fitting under a counter Warning Make sure that mains plug is disconnected from the mains socket during installation Put the appliance adjacent to a water tap and a water drain The plinth on freestanding appliance is not adjustable Do not remove the appliance worktop if you want to use the dishwasher as a freestanding appliance Remove the appliance worktop to install it under a sink unit or a kitch
21. tletchildren touch the detergents Keepthe children and pets away from the appliance when the door is open Installation Make sure that the appliance is not damaged be cause of transport Do not connect a damaged ap pliance If necessary contact the supplier Remove all packaging before first use Aqualified and competent person must do the elec trical installation A qualified and competent person must do the Contact your local Customer Care Centre plumbing installation Do not drill into the sides ofthe appliance otherwise Do not change the specifications or modify this prod damage to hydraulic and electrical components may uct Risk of injury and damage to the appliance occur Do not use the appliance Ay Warning Carefully obey the instructions for if the mains cable or water hoses are damaged electrical and water connections if the control panel worktop or plinth area are damaged so that you can get access to the inner side of the appliance Control panel Q Washing e e e Q Drying Regular Rinse amp Eat Auto Quick 30 Hold Delay Finished COLLO Bl pine Pre L Cancel J hold 3 sec Onloff button Button Lock Program selection buttons Delay start button Indicator lights E Digital display Indicator lights Washing The indicator light comes on when the washing phase or the rinsing phase operates Drying The indicator light comes on when the drying phase
22. ty water going back into the appliance If the spigot of the sink has a non return valve this valve can cause the appliance to drain incorrectly Remove the non return valve Make sure that the water couplings are tight to prevent water leakage Caution Ensure that hoses are not crushed or kinked under or behind the appliance Caution Once connected the inlet hose to the water tap turn the tap on and check that there are no leaks 17 Always plug the mains plug onto a correctly installed approved socket Do not use multi ways plugs connectors and extension cables This can constitute a fire hazard through overheating If necessary have the domestic wiring system socket replaced Ifthe mains cable has to be replaced contact your local Customer Care centre The mains plug must be accessible after the appliance has been installed 18 Never unplug the appliance by pulling on the cable Always pull the plug Test the appliance Run a quick washing program and ensure that the appliance fills with water washes and drains with no leaks The manufacturer accepts no liability for failure to observe the above safety precautions Warranty E Electrolux FOR SALES IN AUSTRALIA AND NEW ZEALAND This document sets out the terms and conditions of product warranties for Electrolux branded ap pliances It is an important document Please keep it with your proof of purchase documents in a safe place for future reference sh
23. ws again contact your Customer Care Centre Model Mod If the display shows a fault code not described inthe Product number PNC chart contact your Customer Care Centre Serial number S N 13 For these data refer to the rating plate Product number Write the necessary data here Model description Serial number The cleaning results are not satisfactory The dishes are not clean The dishes are wet and dull There are streaks milky spots or a bluish coating on glasses and dishes Dry water drop stains on glasses and dishes 14 The selected washing program is not applicable for the type of load and Soil The baskets are loaded incorrectly so that water cannot reach all surfaces Spray arms do not turn freely because of incorrect arrangement of the load The filters are dirty or not correctly installed The quantity of detergent is too little or missing No rinse aid has been used The rinse aid dispenser is empty Decrease the rinse aid dosage Increase rinse aid dosage The detergent can be the cause Technical data Dimensions Width mm Height mm Depth mm Electrical connection Voltage Overall power Fuse Water supply pressure Minimum Maximum Capacity Place settings Environment concerns The packaging materials are environmentally friendly and can be recycled The plastic components are iden tified by markings e g gt PE l
24. ys on when you switch on the appliance Do these steps if the drying results are not satis factory 1 Fillthe rinse aid dispenser with rinse aid 2 Setthe rinse aid dosage to position 2 Ifyou go back to use normal detergents again fill the rinse aid dispenser and adjust the rinse aid dosage Select and start a washing program Set the washing program with the door ajar The washing program only starts after you close the door Until then it is possible to modify the settings 1 Press the on off button 2 Make sure that the appliance is in setting mode 3 Press one of the program buttons Refer to the Washing programs chart for program details The program indicator light comes on The Washing indicator light comes on The flashing digital display shows the program duration 4 Close the door The washing program starts automatically The program indicator light and the Washing in dicator light stay on When the washing program operates you cannot change the program Cancel the washing pro gram Refer to Cancelling a washing program Select and starta washing program with delay start 1 Press the on off button 2 Seta washing program 3 Pressthe delay start button until the display shows the necessary delay start of the washing program 4 Close the door The countdown starts The display shows re maining time to the start of the washing pro gram Whenthe countdown is com
Download Pdf Manuals
Related Search