Arial bold 34ptGene-6320
Contents
1. You can NOT set the critical battery level below the minimum level set by manufacturer s default setting You can also change the actions Sleep Hibernate Shut Down or Do nothing associated with the low and critical battery levels Chapter 3 Power Management 3 5 Rugged Tablet Computer RTC 700T Battery Charging When you use the AC adapter to connect your RTC to a power outlet the internal battery will automatically begin to recharge While the battery is charging the Battery Charge icon on the Indicator panel will be active after 6 12 seconds When the battery is fully charged the Battery Charge icon will turn off If your RTC is turned off a fully discharged battery will take about 3 hours to recharge If your RTC is turned on and is not in suspend mode it twill take about 4 5 hours to recharge the battery Refer to the following table Charging System On Under Screen Saver Mode 4 5 hours System Off Suspend to RAM 4 hours Note 1 A fully charged Li ion Battery can run the RTC for approximately 6 0 hours Note 2 We suggest you to charge the machine battery at least one time per month if the machine has not been operated Chapter 3 Power Management 3 6 Rugged Tablet Computer RTC 700T 3 2 Battery Usage amp Safety The battery in RTC is not intended to be replaced by the customer or end user If you believe the battery is damaged or needs to be replaced take the RTC to2. Step 2 Install VGA Driver 1 Click on the Step 2 Graphics folder and double click on Setup exe file 2 Follow the instructions that the window shows 3 The system will help you to install the driver automatically Step 3 Install Audio Driver 1 Click on the Step 3 Audio folder and double click on Setup exe file Follow the instructions that the window shows The system will help you to install the driver automatically Step 4 Install WiFi Driver 1 Click on the Step 4 WiFi folder and double click on Setup exe file 2 Follow the instructions that the window shows Chapter 4 Driver Installation 4 3 Rugged Tablet Computer RTC 700T 3 The system will help you to install the driver automatically Step 5 Install 3G Driver 1 Click on the Step 5 3G folder and double click on Setup exe file Follow the instructions that the window shows The system will help you to install the driver automatically Step 6 Install Bluetooth Driver 1 Click on the Step 6 Bluetooth folder and double click on BluetoothSetup exe file Follow the instructions that the window shows The system will help you to install the driver automatically Step 7 Install Camera Driver 4 Click on the Step 7 Camera folder and double click on Setup exe file Follow the instructions that the window shows The system will help you to install the driver automatically Step 8 Install AP Driver 7 Click on th
3. specified in IEEE 1528 This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter The County Code Selection feature is disabled for producted Appendix A Statements A 5 Rugged Tablet Computer RTC 700T marketed in the U S and Canada For products available in the U S Canada markets only channels 1 11 can be operated The selection of other channels is not possible Appendix A Statements A 6 Rugged Tablet Computer RTC 700T A 3 CE Mark Notice CE Mark Warning ES CE marking for devices without wireless LAN Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004 108 EC Electromagnetic compatability and 2006 95 EC Low voltage directive CEO CE Marking for devices with wireless LAN Bluetooth This equipment complies with the requirements of Directive 1999 5 EC of the European Parliament and Commission from March 9th 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity Appendix A Statements A 7 Rugged Tablet Computer RTC 700T A 4 Safety Caution Important Safety Instructions Power Satety Requirement Products with electrical current ratings up to 2A and weighs more than 1 Kg must use approved power cords greater than or equal
4. to VCTF 3G or 0 75mm2 Basic safety precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following Do not use the RTC near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool Avoid using a telephone other than a cordless type during an electrical storm There may be a remote risk of electric shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions Appendix A Statements A 8 Rugged Tablet Computer RTC 700T A 5 Battery Disposal There is a risk of explosion if the battery is replaced by an incorrect type Dispose of used batteries according to the instructions This symbol indicates that the battery should NOT be placed in municipal waste DO NOT throw the RTC 700T with municipal waste This product is designed for proper reuse of parts and recycling This symbol indicates that the product electrical electronic equipment and mercury containing button cell battery should not be placed in municipal waste Check local regulations for disposal of electronic products SAFE TEMP The RTC 700T should only be used in environments between 20 C 4 F and 50 C 1
5. 22 F Regulatory information Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product Any changes or modifications including the antennas made to this device that are not expressly approved by the manufacturer may void the user s authority to operate the equipment The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution of the connecting cables and equipment other than manufacturer specified It is the responsibility of the user to correct any interference caused by such unauthorized modification Appendix A Statements A 9 Rugged Tablet Computer RTC 700T substitution or attachment Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines Appendix A Statements A 10 Rugged Tablet Computer RTC 700T A 6 Battery Caution Please don t stock the RTC for a long time over one month without charging the battery that could damage or reduce life of the battery There is a danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions Regula
6. Battery Disposal i A 9 A 6 Battery Caution i A 11 A 7 Adapter Caution eee eee eee A 12 Rugged Tablet Computer RTC 700T Chapter Introduction Chapter 1 Introduction 1 1 Rugged Tablet Computer RTC 700T 1 1 Getting Started Congratulations on your purchase of a Rugged Tablet Computer RTC It weighs less than 700g in large part to a 7 inch screen that boasts a 1 024 by 600 resolution It s truly a portable rugged tablet that comes with the gamut of wireless radios including 802 11b g n Wi Fi Bluetooth 3G HSPA and AT amp T With your RTC you will be able to organize and access important business and personal information In addition you will be able to send and receive e mail and access the Internet This Manual contains all the information you need to set up and use your RTC It describes all the features of the RTC in an easy to read yet thorough manner Chapter 1 Introduction 1 2 Rugged Tablet Computer RTC 700T 1 2 Features e Your new RTC offers leading easy to access multimedia and entertainment features You can e Connect to Internet e Access your email while on the move e Keepin touch with your friends via your Contacts and social networking applications e Listen to rich full impact audio via Dolby Mobile e Software Included e Windows 7 Professional Edition which includes e Microsoft Internet Explorer e Microsoft Windows Media Player
7. O O ERE RAM She x O O O O O HP aR Ah HE 25 x O O O O O 5A Wea x O O O O O WA x O O O O O IR x O O O O O BI BR x O O O O O HAYA x O O O O O O RIBES AITINA SJ T 11363 2006 REMEMBER X RENZA A EM DA ZII RA pZ SH SJ T 11363 2006 KT NU EER BE EP TAR OR ER AGRE BIE HEAR Fe Z ERR ABA RA NT BER EDK MRAZ viii Rugged Tablet Computer RTC 700T Contents Chapter 1 Settings 1 1 Getting Started nn cnn nen 1 2 te ito s 1 3 1 3 Where to Look For Information ee eee 1 5 VA e e 2 T ia 1 6 1 5 Loading WINdOWS odredene iii a cnc 1 7 1 6 Adjusting the VOIUME non 1 8 1 7 Adjusting the Brightness eee eee 1 9 1 8 Turning off your RTC 1 10 Chapter 2 Making Connections 2 1 Right Side Connectors ii 2 3 2 2 Left Side Connectors 2 5 2 3 Rear Side Connectors 2 6 Chapter 3 Power Management 3 1 Power ManagemMent eee eee eee eee 3 2 3 2 Battery Usage amp Safety eneen 3 7 3 3 Heat Consideration i 3 8 3 4 Calibration the Touch screen eee eee eee 3 8 Chapter 4 Driver Installation ALT Inea oa te cc 4 3 Rugged Tablet Computer RTC 700T Appendix A Statements A 1 StateMeEnts iii A 2 A 2 Canadian Notice sese A 5 A 3 CE Mark NOtice i A 7 A 4 Safety Caution ii A 8 A 5
8. Rugged Tablet Computer RTC 700T RTC 700T Rugged Tablet Computer Intel AtomTM Z670 Oka Trail 1 5GHz Processor with DDR2 1G 7 WXGA TFT LCD 1024x600 1Mini HDMI 1Mini USB Dual Camera RTC 700T Manual 1 Ed Aug 2012 Rugged Tablet Computer RTC 700T Copyright Notice This document is copyrighted 2012 All rights are reserved The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice No part of this manual may be reproduced copied translated or transmitted in any form or by any means without the prior written permission of the original manufacturer Information provided in this manual is intended to be accurate and reliable However the original manufacturer assumes no responsibility for its use or for any infringements upon the rights of third parties that may result from its use The material in this document is for product information only and is subject to change without notice While reasonable efforts have been made in the preparation of this document to assure its accuracy AAEON assumes no liabilities resulting from errors or omissions in this document or from the use of the information contained herein AAEON reserves the right to make changes in the product design without notice to its users Rugged Tablet Computer RTC 700T Acknowledgments All other products name or trademarks are properties of their respectiv
9. a service center for inspection and replacement Do not let the RTC or battery come in contact with liquids Liquids can get into the RTC s circuits leading to corrosion Even when the RTC appears to be dry and appears to operate normally the circuitry could slowly corrode and pose a safety hazard If the RTC and or battery get wet have them checked by your service provider or contact AAEON even if they appear to be working properly Do NOT place your battery in or near a heat source Excessive heating can damage the RTC or the battery and could cause the RTC or the battery to explode Do NOT dry a wet or damp battery with an appliance or heat source such as microwave oven hair dryer iron or radiator Avoid leaving your RTC in your car in high temperatures Do NOT dispose of the RTC or the battery in a fire The RTC or the battery may explode when overheated Avoid dropping the cell RTC Dropping the RTC especially on a hard surface can potentially cause damage to the RTC If Chapter 3 Power Management 3 7 Rugged Tablet Computer RTC 700T you suspect damage the RTC or battery take it to service center for inspection e Never use any charge or battery that is damaged in any way 3 3 Heat Considerations The RTC processor has been specially designed to consume little power and generates very little heat However working in a hot environment or working for long periods may raise the temperature If t
10. d hold to turn your RTC off 2 SIM Card Slot Accepts a 3G SIM card Configuration may vary depending on model Light Sensor Detects ambient light and automatically adjusts the screen brightness Front facing With 2 mega pixels camera for video Camera chatting and self portrait image Web camera for video communication Chapter 2 Making Connections 2 5 Rugged Tablet Computer RTC 700T 2 3 Rear Side Connectors Description Barcode scanner Barcode scan Optional Rear facing With 5 mega pixels camera for taking Camera high resolution images used when taking pictures or recording videos Chapter 2 Making Connections 2 6 Rugged Tablet Computer RTC 700T Chapter Power Management Chapter 3 Power Management 3 1 Rugged Tablet Computer RTC 700T 3 1 Power Management Checking the Battery Level This RTC has built in power management unit that monitor system activity System activity refer to any activity involving one or more of the following devices keyboard mouse memory card peripheral connected to the RTC and video memory If no activity is detected for a period of time called an inactivity timeout the RTC stops some or all these devices in order to conserve energy This RTC employs a power management scheme that supports the advanced configuration and power interface ACPI which allows for maximum power conservation and maximum performance at the same time Windows handles all power
11. e AAEON Launch key APP program e High performance Processors Ultra Low Voltage Mobile Intel Atom Processor 1 5GHz CPU e High Capacity Hard Disk Drive The Rugged Tablet Computer has a high capacity mSATA SSD drive to store your favorite programs and large multimedia files Chapter 1 Introduction 1 3 Rugged Tablet Computer RTC 700T e Built in WiFi Bluetooh and 3G modem capabilities Built in 802 11b g n 3 5G generation networking which allow you to access the Internet anywhere in anytime Chapter 1 Introduction 1 4 Rugged Tablet Computer RTC 700T 1 3 Where to Look For Information About Your RTC This User s Manual describes the key elements of your RTC New users can find a simple step by step orientation in the Quick Start section of this Chapter About Windows Windows Online Help found on the Start menu offers extensive Windows assistance Welcome to Windows offers an online orientation for new Windows users Find it in Start Programs Accessories System Tools Chapter 1 Introduction 1 5 Rugged Tablet Computer RTC 700T 1 4 Quick Start Turning on the Rugged Tablet Computer for the First Time For first time use you need to charge your RTC for four hours After that you can recharge the battery as needed 1 Connect the AC adapter power cord to the AC adapter 2 Connectthe AC adapter to the DC in jack on the right side of your RTC Connect the AC adapter power cord to an AC outlet Pr
12. e Step 8 AP folder and double click on LaunchKey_700T exe file Follow the instructions that the window shows The system will help you to install the driver automatically Chapter 4 Driver Installation 4 4 Rugged Tablet Computer RTC 700T Appendix Statements Appendix A Statements A 1 Rugged Tablet Computer RTC 700T A 1 Statements Declarations and Safety Statements Federal Communications Commission Statement This device complies with part 15 of the FCC Rules Operation is subject to the following conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy ana if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment causes harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the
13. e owners e Intel is trademarks of Intel Corporation e Windows 7 and Windows Embedded Standard 7 are registered trademark of Microsoft ma Embedded Windows 7 Standard 7 All other product names or trademarks are properties of their respective owners Rugged Tablet Computer RTC 700T Packing List Before you begin operating your tablet computer please make sure that the following materials are enclosed e 1 RTC 700T Rugged Tablet with Windows 7 e 1 AC Adapter with Power Cord e 1 DVD ROM for driver amp manual in PDF format If any of these items should be missing or damaged please contact AAEON s distributor or sales representative immediately iii Rugged Tablet Computer RTC 700T Options The following items are normally optional but some vendors may include them in the standard package Some items may not be available in some countries or some vendors may choose not to carry all the times e 3G Modem module Caution when purchasing any of the accessories listed above purchase only those accessories that are approved for use with your Rugged Tablet Computer The above accessories are proprietary items Our system vendor can obtain these approved accessories If you use items that are not approved for use with this Rugged Tablet Computer you may cause your Rugged Tablet Computer to malfunction or to emit or receive electro magnetic radiation in excess of local regulations For non proprieta
14. ess the power button to turn on the power Note The battery is not fully charged Allow your battery to fully charge before using it i e before disconnecting AC power Calibrating the battery before use is also highly recommended It is normal for the RTC surface to become xarm during charging or long periods of use Refer to Chapter of Power Management for further information Chapter 1 Introduction 1 6 Rugged Tablet Computer RTC 700T 1 5 Loading Windows The following section is for the Windows operating system only If you are installing a different operating system please check with your vendor for installation details Your RTC will begin loading Windows once you turn on the power Wait a few seconds for Windows setup to load The Welcome to Windows screen will appear You may disable this feature by clearing the check box labeled show this screen each time Windows starts Some software comes preloaded with Windows New users can familiarize themselves with this software by selecting Programs from the start menu then clicking on programs to run them Chapter 1 Introduction 1 7 Rugged Tablet Computer RTC 700T 1 6 Adjusting the Volume You can adjust the volume with the Windows volume control applet located on the taskbar Chapter 1 Introduction 1 8 Rugged Tablet Computer RTC 700T 1 7 Adjusting the Brightness You can adjust LCD brightness over AAEON s Launch key APP Plea
15. following measures Appendix A Statements A 2 Rugged Tablet Computer RTC 700T e Reorientor relocate the receiving antenna e Increase the separation between equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help e Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment The antenna s used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter Appendix A Statements A 3 Rugged Tablet Computer RTC 700T RF Exposure Information SAR This device meets the government s requirements for exposure to radio waves This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency RF energy set by the Federal Communications Commission of the U S Government The exposure standard employs a unit of measurement known as the Specific Absorption Rate SAR The SAR limit set by the FCC is 1 6W kg Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels The highest SAR value for the device as reported to the FCC is 0 387 W kg when placed next to the body The FCC has granted an Equipment Authoriza
16. he temperature continues to rise processor activity will be reduced You may notice a slight loss of performance when this happens 3 4 Calibrating the Touch Screen Calibration Display Color Before starting Display Color Calibration make sure that your display is set to its native resolution This helps to improve the accuracy of the resulting calibration 1 Click to open Display Color Calibration If you re prompted for an administrator password or confirmation type the password or provide confirmation Chapter 3 Power Management 3 8 Rugged Tablet Computer RTC 700T 2 Note In Display Color Calibration click Next to continue 1 If you have a display calibration device that came with other software consider using the color measurement device with the accompanying software instead of Display Color Calibration Using the calibration device with the accompanying calibration software that often comes with it can help you get the best color on your display In general using a color measurement instrument to calibrate your display will result in a better calibration compared to the results of doing a visual calibration which is done in Display Color Calibration Display Color Calibration is not available in Windows Server 2008 R2 Use Display Color Calibration to adjust color settings Chapter 3 Power Management 3 9 Rugged Tablet Computer RTC 700T Calibration Display Setting Click Control Pane
17. l Control Panel Tablet PC Settings jour pen and touch penna BP setup K e 9 i a a i ba 1 Digital Fiat Panel 1024768 snr Y is o L U i i aian etais sue Input soritabi T a 4 v put Available in a R o L ib j U i ia a E o rh yow uroen rotates i lt a a a Digitizer Calibration Tool e S Do you want to save the calibration data Chapter 3 Power Management 3 10 Rugged Tablet Computer RTC 700T Chapter Driver Installation Chapter 4 Driver Installation 4 1 Rugged Tablet Computer RTC 700T The RTC 700T comes with a CD ROM that contains all drivers your need Follow the sequence below to install the drivers Step 1 Install Chipset Driver Step 2 Install VGA Driver Step 3 Install Audio Driver Step 4 Install WiFi Driver Step 5 Install 3G Driver Step 6 Install Bluetooth Driver Step 7 Install Camera Driver Step 8 Install AP Driver Please read following instructions for detailed installations Chapter 4 Driver Installation 4 2 Rugged Tablet Computer RTC 700T 4 1 Installation Insert the RTC 700T CD ROM into the CD ROM Drive And install the drivers from Step 1 to Step 8 in order Step 1 Install Chipset Driver 1 Click on the Step 1 Chipset folder and double click on infinst_autol exe file 2 Follow the instructions that the window shows 3 The system will help you to install the driver automatically
18. local power supply consult your dealer or local Power Company e Do not step on or place anything on the power cord Rugged Tablet Computer RTC 700T If you use the RTC with an extension cord ensure that the total ampere ratings of all the devices sharing the extension do not exceed the rating of the extension cord or the rating of the wall outlet Never push foreign objects into the RTC through any of the slots or openings Dangerous voltages are present which could cause electric shock or fire or damage sensitive components vi Rugged Tablet Computer RTC 700T FCC This device complies with Part 15 FCC Rules Warning Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution There is a danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions and your local government s recycling or disposal directives vii Rugged Tablet Computer RTC 700T Below Table for China RoHS Requirements Pe hh PABA AO LAR MEAR E AAEON Panel PC Workstation ABA EW RRR HUEZ EK 44 ES fa 7x0 ERKE RAE Pb Hg Cd Cr VI PBB PBDE RA x O O O O O REETA PRE x O O O
19. nate power source or stop using the RTC When your battery is almost out of power the battery icon indicates a critical battery level and then your RTC goes into hibernation If you don t have enough time to act after seeing the low and reserve battery notification you can increase the percentage of battery remaining for these settings This can be especially useful for older batteries which might not have as much storage capacity How to change Low Reserve and Critical power levels on RTC s battery condition 1 Star Control Panel Hardware and Sounds Power Options 2 Onthe Select a power plan page next to the plan you want to change click Change plan settings 3 Onthe Change settings for the plan page click Change advanced power settings 4 Onthe Advanced settings tab expand battery expand Low battery level Reserve battery level and Critical battery level Chapter 3 Power Management 3 4 Rugged Tablet Computer RTC 700T Change the percentage of battery remaining that you want for each level and then click OK Warning Warning Please don t stock the RTC for a long time over one month without charging the battery that could damage or reduce life of the battery When battery power is low the battery indicator will flash red and the alarm will display a warning on your screen Take immediate action such as saving files or connecting to the AC adapter or data may be lost
20. r RTC 700T Making Connections Your RTC is equipped with a full array of ports and connectors including standard input output I O ports for quickly and easily adding peripheral devices such as printers keyboards and mouse Refer to documentation included with individual devices for details on connecting these devices to your RTC Chapter 2 Making Connections 2 2 Rugged Tablet Computer RTC 700T 2 1 Right Side Connectors Description MicroSD card slot Insert a micro SD card into the slot under this cover it stores plenty of information even in a compressed state Headset Jack Connect to audio devices e g speakers headphones Supports compatible 3 5mm headset with built in microphone Speakers Emits stereo audio used in music or video playback notification tones and other sounds DC in Jack Connect to the AC DC power supply Chapter 2 Making Connections 2 3 Rugged Tablet Computer RTC 700T Mini USB port Host Slave csi Mini HDMI port Homi Chapter 2 Making Connections 2 4 Description Connector to a computer with USB cable Plug in a mini USB cable to sync music video and files This mini USB port can only play as host role Supports high definition digital video connectors Rugged Tablet Computer RTC 700T 2 2 Left Side Connectors Description Power Bottom Long press to turn your RTC on press 1 briefly to turn the screen on off or enter sleep mode press an
21. ry accessories such as PC cards or printers ensure that the accessory functions properly in your Rugged Tablet Computer before making the purchase Your system vendor may be able to recommend reliable brands and models Rugged Tablet Computer RTC 700T Safety amp Maintenance You can use your Rugged Tablet Computer under a wide range of environmental conditions However to ensure long use and continued high performance consider the following factors when setting up your Rugged Tablet Computer RTC e Follow all warnings and instructions noted in this documentation and in the Microsoft Help program e The input voltage range between the wall outlet and this adapter is AC 100V 240V and the output voltage of this adapter is DC 12V 2A e The first time you use your RTC we recommend that you carefully read the Making Connections section of this manual and initialize the battery to ensure optimum battery performance e Unplug the RTC from the power outlet before cleaning Use a damp cloth for cleaning Do not use aerosols solvents or strong detergents e Slots and openings in the system cabinet are for ventilation purposes Do not block or cover these openings or the system could overheat Does not use or store the RTC near a source of heat or dust e On the base or rear panel of this RTC there is a label with information on the power requirements of this system These requirements must be followed If you are unsure of your
22. saving chores for your RTC You can check the remaining battery power in the Windows battery status indicator located at the lower right hand corner of the task tray The Battery Status icon only appears in the task tray while the unit is running on the battery power but not while the unit is running off an external power source through the AC adaptor 3 13 PM UL ZA Battery Power Indicator a 3 i fo Chapter 3 Power Management 3 2 Rugged Tablet Computer RTC 700T Enter Monitoring Battery Power There are two ways to monitor how much power the battery has left 1 Click Start Control Panel Hardware and Sound Power Options life dij 2 Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status If you do not see the battery icon enable it in Start Control Panel Power Options Choose the Advanced tab and click Always show icon on the taskbar i amp fo E Customize SS Chapter 3 Power Management 3 3 Rugged Tablet Computer RTC 700T Low Battery Alarms RTC warns you when your battery charge reaches low reserve and critical levels When the charge gets low the battery icon in the notification area indicated a low battery level When your battery charge reaches the reserve level RTC notifies you that you re running on reserve power At the point you need to save your work and then find an alter
23. se go to the lower right corner of window and press up arrow icon to choose Launch key then e Pull Left decreases the brightness e Pull Right increases the brightness a fo E Customize om pee 140AM AS 1 K Te E K RTC 700T_settin Device control wir Bluetooh on crson cameraon GsensoR on Backlight control Light Sensor disabled Launch key setting F2 setting C WINDOWS explorer exe change APP F setting C WINDOWS system32 psk exe change APP OSK CAMERA Cases Chapter 1 Introduction 1 9 Rugged Tablet Computer RTC 700T 1 8 Turning off your RTC Turning off the RTC properly is important to maintaining the RTC You can reach to Start menu and then click Shut Down a Getting Started e Windows Media Center Calculator Documents Pictures Sticky Notes Music Games Computer A Remote Desktop Connection A Magnifier U Solitaire Control Panel Devices and Printers Default Programs LaunchK sd T Help and Support gt All Programs Shutdown 7 If you are going to be away from the RTC for a short period there are ways of conserving power without shutting down the system Warning Warning Shutting off the RTC improperly may result in data loss Chapter 1 Introduction 1 10 Rugged Tablet Computer RTC 700T Chapter Making Connections Chapter 2 Making Connections 2 1 Rugged Tablet Compute
24. tion for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines SAR information on this device is on file with the FCC and can be found under the Display Grant section of www fcc gov oet ea fccid on the FCC ID MSQTF101 This device is in compliance with SAR for general population uncontrolled exposure limits in ANSI IEEE C95 1 1999 and has been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C Appendix A Statements A 4 Rugged Tablet Computer RTC 700T A 2 Canadian Notice IC Regulations This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada This Category Il radio communication device complies with Industry Canada Standard RSS 310 Ce dispositif de radio communication de cat gorie Il respecte la norme CNR 310 d Industrie Canada IC Radiation Exposure Statement This EUT is compliant with SAR for general population uncontrolled exposure limits in IC RSS 102 and has been tested in accordance with the measurement methods and procedures
25. tory information Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product Any changes or modifications including the antennas made to this device that are not expressly approved by the manufacturer may void the user s authority to operate the equipment The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution of the connecting cables and equipment other than manufacturer specified It is the responsibility of the user to correct any interference caused by such unauthorized modification substitution or attachment Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines Appendix A Statements A 11 Rugged Tablet Computer RTC 700T A 7 Adapter Caution This RTC is for use with model NO LTE24E S2 2 Appendix A Statements A 12
Download Pdf Manuals
Related Search