Home

Owner`s Manual DVD Home Theater Sound System

Contents

1. iPod Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPhone iPod iPod classic iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries DVD Logo is a trademark of DVD Format Logo Licensing Corporation o a S N X RQT9584 N N N R RQT9584 Specifications AMPLIFIER SECTION RMS Output Power Dolby Digital Mode Front Ch 160 W per channel 3 Q 1 kHz 10 THD Surround Ch 160 W per channel 3 Q 1 kHz 10 THD Center Ch 160 W per channel 3 Q 1 kHz 10 THD Subwoofer Ch 200 W per channel 3 Q 100 Hz 10 THD Total RMS Dolby Digital mode power 1000 W FTC Output Power Dolby Digital Mode Front Ch 60 W per channel 3 150 Hz to 20 kHz 1 THD Surround Ch 60 W per channel 3 Q 150 Hz to 20 kHz 1 THD Center Ch 90 W per channel 3 Q 150 Hz to 20 kHz 1 THD Subwoofer Ch 100 W per channel 3 Q 50 Hz to 150 Hz 1 THD Total FTC Dolby Digital mode power 430 W FM TUNER TERMINALS SECTION Preset
2. While the picture is displayed press TOP MENU to show the thumbnail menu e g Press A V lt to select a picture and press OK o Press SKIP 44 SKIP PI to skip page by page W Rotating a picture While a picture is displayed press A V lt P G to rotate the picture Preparation While stopped press PLAY MODE to select the play mode Each time you press the button CD Music Program menu JPEG Picture Program menu RND Random menu Exit program and random menus Program play up to 30 items 1 Press A V G to select an item and press OK e g JPEG Picture Program e When a content is selected it will be programmed e Repeat this step to program other items JPEG To return to the previous folder press RETURN 69 You can also do this by selecting Bmw in the menu 2 Press gt PLAYJG to start play To clear the selected program 1 Press gt and then press A W to select the program 2 Press CANCEL To clear the whole program Press P gt 8 several times to select Clear All and then press OK The whole program is also cleared when the disc tray is opened the unit is turned off or another source is selected Random play CD All tracks will be played in random order Press gt PLAY to start play JPEG order 1 Press A V G to select the
3. FCC Note This eguipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that m
4. Type Speaker unit s Full range Output sound pressure Frequency range Dimensions WXHXD Mass Weight Center speaker SB HC171 Type Speaker unit s Full range Output sound pressure Frequency range Dimensions WXHXD Mass Weight Subwoofer SB HW190 Type Speaker unit s Woofer Output sound pressure Frequency range Dimensions WXHXD Mass Weight GENERAL Power supply Power consumption Dimensions WXHXD Mass Weight Operating temperature range Operating humidity range 1 way 1 speaker system Bass reflex Impedance 3 Q 6 5 cm 21 2 Cone type 78 dB W 1 m 97 Hz to 25 kHz 16 dB 130 Hz to 22 kHz 10 dB 80 mMmx139 mmx70 mm 35 32 X 515 32 x 23 4 0 37 kg 0 82 Ibs 1 way 1 speaker system Bass reflex Impedance 3 Q 6 5 cm 21 2 Cone type 78 dB W 1 m 97 Hz to 25 kHz 16 dB 130 Hz to 22 kHz 10 dB 80 mMmx139 mmx70 mm 35 32 X 515 32 x 23 4 0 37 kg 0 82 Ibs 1 way 1 speaker system Bass reflex Impedance 3 Q 6 5 cm 21 2 Cone type 79 dB W 1 m 90 Hz to 25 kHz 16 dB 130 Hz to 22 kHz 10 dB 146 5 mmx84 mmx78 mm 515 16 x 35 16 x 31 16 0 5 kg 1 1 Ibs 1 way 1 speaker system Bass reflex Impedance 3 Q 16 cm 6 2 Cone type 78 dB W 1 m 40 Hz to 220 Hz 16 dB 45 Hz to 180 Hz 10 dB 145 mmx289 5 mmx259 mm 523 32 x 1113 32 x 103 16 3 kg 6 6 Ibs AC 120 V
5. The unit is automatically switched to standby mode e The Sleep timer was working and had reached the set time limit gt 4 e The main unit will automatically switch to standby mode after 30 minutes of inactivity gt 4 Power of this unit is turned off when the input for the TV is changed This is normal when using VIERA Link HDAVI Control 4 or later details please read the operating instructions for the TV For General operation No response when any buttons are pressed e This unit cannot play discs other than the ones listed in this Owner s Manual gt 18 e The unit may not be operating properly due to lightning static electricity or some other external factor Turn the unit off and then back on Alternatively turn the unit off disconnect the AC power supply cord and then reconnect it e Condensation has formed Wait 1 to 2 hours for it to evaporate No response when remote control buttons are pressed e Check that the battery is installed correctly gt 8 e The battery is depleted Replace it with a new one gt 8 e Aim the remote control at the remote control signal sensor and operate gt 4 Other products respond to the remote control Change the remote control operating mode gt 4 Cannot display the START menu Remove the disc and then press START 49 again No picture or sound e Check the video or speaker connection gt 6 7 e Check the power or input set
6. Confirm the audio connection Press EXT IN to select the corresponding source gt 7 9 e When using the HDMI connection ensure that Audio Out in the HDMI menu is set to On gt 17 No sound from the surround speakers e When using the Surround layout Recommended mode press SURROUND to select MULTI CH gt 10 e When using the Front layout Alternative mode press SURROUND to select A SRD gt 10 The picture on the TV is not displayed correctly or disappears e Ensure that the unit is connected directly to the TV and is not connected through a VCR gt 7 e Mobile telephone chargers can cause some disturbance elf you are using an indoor TV antenna change to an outdoor antenna e The TV antenna wire is too close to the unit Move it away from the unit e Reduce the number of connected HDMI devices e When using the HDMI AV OUT terminal ensure that an incompatible video output with the connected TV is not selected Set the Video Resolution in Video menu to 480p gt 16 e Video images converted to 1920x 1080 resolution may look different from the true native 1080p full HD sources This is not a malfunction of the main unit Picture size does not fit the screen e Change TV Aspect in the Video menu gt 16 e Use the TV to change the aspect e Change the zoom setting Zoom in Menu 2 gt 13 JPEG This is normal during HD JPEG
7. 7 0 mm to 9 4 mm EN 9 32 to 3 8 Wall or pillar a mm to 7 5 mm s2 to 5 16 2 Fit the speaker securely onto the screw s with the hole s e g Surround speaker DO NOT g In this position the speaker will likely fall if moved to the left or right W Tips Use the measurements indicated below to identify the screwing positions on the wall e Leave at least 20 mm 5 32 of space above the speaker and 10 mm 3 32 on each side to allow enough space for fitting the speaker DO i e Move the speaker so that the screw is in this position Front Surround speaker Center speaker oi 24 mm 15 1e 116 mm 49 1e O 40 mm 1 6 O 40 mm 1 6 O 18 mm 2 32 65 mm 2 O 24 mm 15 1e 95 5 mm 32 32 O 27 mm 11 6 W To prevent speakers from falling Front speaker Surround speaker Center speaker e g Front speaker String not supplied Screw eye not supplied Less than 10 cm 315 1e Troubleshooting guide Before reguesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem refer to Customer Services Directory United States and Puerto Rico on page 23 No power Insert the AC power supply cord securely gt 8
8. 120 Surround Surround speaker left speaker right x1 Position with at least 5 cm 2 of space on all sides for proper ventilation x2 Place it on a rack or shelf Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV x3 Position it to the right or left of the TV on the floor or a sturdy shelf so that it will not cause vibration Leave about 30 cm 1113 16 from the TV Depending on the room layout you may like to use all the speakers at the front Front layout Alternative gt 8 Easy setup Notes on speaker use e Use only supplied speakers Using other speakers can damage the unit and sound quality will be negatively affected e You can damage your speakers and shorten their lifespan if you play sound at high levels over extended periods e Reduce the volume in the following cases to avoid damage When playing distorted sound When the speakers are reverberating due to a record player noise from FM broadcasts or continuous signals from an oscillator test disc or electronic instrument When adjusting the sound quality When turning the unit on or off If irregular coloring occurs on your TV The center speaker is designed to be placed close to a TV but the picture may be affected on some TVs and setup combinations If this occurs turn the TV off for about 30 minutes The demagnetizing function of the TV should correct the problem If it persists
9. 4S iPhone 4 iPhone 3GS iPhone 3G iPhone In some locations reception status of an iPhone may be poor when it is connected to this unit To use the iPod touch iPhone features 1 Press the Home button on the iPod touch iPhone 2 Select the iPod touch iPhone features on the touch screen to operate CL When the iPhone receives a call while connected to this unit playback etc of the iPhone may stop To prioritize the operation with the iPhone connected to this unit make the setting so that the iPhone does not receive calls Changing the player settings 1 Press DVD to select DVD CD 2 Press START to show the START menu 3 Press A V to select Setup and press OK 6 Item Menu Current setting 4 Press A V to select menu and press OK 5 Press A V G to select the item and press OK 6 Press A V to make the settings and press OK e To return to the previous screen press RETURN 0 e To exit the screen press START 49 o The settings remain intact even if you switch the unit to standby e Underlined items are the factory settings in the following menus Display Choose the language for the on screen messages e English e Francais e Espa ol Audio Choose the audio language e English oe French e Spanish Subtitle Choose the subtitle language e Auto e English oe French e Spanish e Off DVD Menu Choose the lan
10. Left Center Right Surround Right Surround Left Subwoofer To stop the test tone press RETURN VIERA Link On The VIERA Link HDAVI Control function is available gt 14 e Off Audio Out On When audio output is from the HDMI AV OUT terminal Depending on the capabilities of the connected equipment audio output may differ from the audio settings of the main unit e Off When audio output is not from the HDMI AV OUT terminal The audio is output using the settings of the main unit Power Off Link Select the desired power off link setting of this unit for VIERA Link operation gt 14 This works depending on the settings of the connected VIERA Link HDAVI Control compatible equipment e Video Audio When the TV is turned off this unit will turn off automatically o Video When the TV is turned off this unit will turn off except during the following conditions audio playback CD iPod iPhone mode radio mode AUX ARC or D IN mode non selected TV audio setting for VIERA Link TV Audio Select the TV audio input to work with the VIERA Link operations gt 14 e AUX e ARC e DIGITAL IN Slide Show Time Set the speed of the slideshow e 3 Seconds e 5 Seconds 10 Seconds e 15 Seconds Easy setup You can execute basic settings to optimize your home theater system gt 8 FL Dimmer Change the brightness of the unit s display
11. O Standby on switch I Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power O Open Close the disc tray gt 11 O Adjust the volume of the main unit O Power indicator The indicator lights when this unit is turned on O Disc tray O Connect iPod iPhone gt 15 O Remote control signal sensor O Display FL display POWER SAVING FEATURES The main unit is designed to conserve its power consumption and save energy W AutoFL display turn off function The main unit s display is automatically turned off when the volume is adjusted to 0 gt 17 FL Control in Others menu W Auto power down function e The main unit will automatically switch to standby mode after 30 minutes of inactivity e g There is no audio signal from an external device Disc playback is stopped paused iPod iPhone playback is stopped paused The disc menu is displayed and play is not selected This function may not work depending on the application type of discs e When the main unit is turned back on POWER ON FROM AUTO POWER DOWN MODE appears on the main unit s display TABLE OF CONTENTS Getting Started Playing Discs ACCESSOFIOS uiumas avaaja aan in aina sanaa nA nao ao 2 Basic Plays v caine ainoaan aa asa ala ea aon majan v IMPORTANT SAFETY INSTRUCTIONS 2 Playing from the selected
12. Or send your reguest by E mail to npcparts us panasonic com You may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9am 9pm EST Panasonic National Parts Center 20421 84th Ave S Kent WA 98032 We accept Visa MasterCard Discover Card American Express For hearing or speech impaired TTY users TTY 1 866 605 1277 As of January 2012 RQT9584 N O v8S6LOUY st AN WO N v8S6LOUY LASER RADIATION WHEN OPEN CAUTION DO NOT STARE INTO BEAM FDA 21 CFR Class IT CLASS 1MV DO NOT VII UND UNSICHTBARE LASERSTRAH GE FFNET NICHT DIREKT MIT OPTISCHEN INSTRU Inside of product User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference SC XH170 MODEL NUMBER SERIAL NUMBER If you see this symbol Information on Disposal in other Countries outside the European Union If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal This symbol is only valid in the European Union As an ENERGY STAR Partner Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR
13. Press and hold 4 OPEN CLOSE on the main unit After a few seconds the display changes to show the current lowest frequency Continue to hold the button down The lowest frequency changes and the step is changed Da If noise is excessive Change the audio to be output as monaural Press and hold PLAY MODE to select MONO The sound becomes monaural e To cancel the mode press and hold the button again until AUTO ST is displayed The mode is also cancelled when you change the frequency In normal circumstances select AUTO ST Messages The following messages or service numbers may appear on the TV or unit s display TV displays Q The operation is prohibited by the unit or disc Q Incorrect Disc Region Only DVD Video discs that include or have the same region number as the one on the rear panel of this unit can be played gt 18 Unit displays NO PLAY e You inserted a disc the unit cannot play insert one it can gt 18 e You inserted a blank disc e You inserted a disc that has not been finalized NO DISC e You have not inserted a disc insert one e You have not inserted the disc correctly insert it correctly gt 11 IPOD OVER CURRENT ERROR The iPod iPhone is drawing too much power Remove the iPod iPhone and turn the unit off and on again F61 Check and correct the speaker cable connections If this does not fix the problem
14. 60 Hz Main unit 75 W 430 mmx47 mmx263 mm 1615 16 X 127 32 X 101 32 Main unit 2 4 kg 5 3 Ibs 0 C to 40 C 32 F to 104 F 35 to 80 RH no condensation Power consumption in standby mode approx 0 2 W CO 1 Specifications are subject to change without notice Mass and dimensions are approximate 2 Total harmonic distortion is measured by a digital spectrum analyzer Limited Warranty Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 Panasonic Home Audio Products Limited Warranty Limited Warranty Coverage For USA and Puerto Rico Only If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Marketing Company of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Audio Products except items below 1 year 1 year DVD Home Theater System 1 year 1 year Home Theater Audio System 1 year 1 year Memory Cards Recha
15. Memory Freguency Modulation FM Freguency range FM 30 stations 87 9 MHz to 107 9 MHz 200 kHz step 87 5 MHz to 108 0 MHz 100 kHz step Antenna terminals 75 Q unbalanced Digital audio input Optical digital input Sampling frequency Optical terminal 32 kHz 44 1 kHz 48 kHz DISC SECTION Discs played 8 cm 3 or 12 cm 5 1 DVD DVD Video 2 DVD R DVD Video JPEG 2 3 3 DVD R DL DVD Video 4 DVD RW DVD Video JPEG 3 5 R RW Video 6 R DL Video 7 CD CD R RW CD DA Video CD SVCD 1 JPEG 2 3 x 1 Conforming to IEC62107 x2 Exif Ver 2 1 JPEG Baseline files Picture resolution 16 9 min size 4x4 max size 720x8 x 405x8 4 3 min size 4x4 max size 7208 x 5408 x3 The total combined maximum number of recognizable picture contents and groups 2600 picture contents and 259 groups Excluding Root folder Pick up Wavelength DVD CD 655 790 nm Laser power CLASS II CLASS Ila Audio output Disc Number of channels 5 1 ch FL FR C SL SR SW VIDEO SECTION Video system NTSC Composite video output Output level 1 Vp p 75 Q Terminal Pin jack 1 system HDMI AV output Terminal 19 pin type A connector HDAVI Control This unit supports HDAVI Control 5 function SPEAKER SECTION Front speakers SB HF171 Type Speaker unit s Full range Output sound pressure Frequency range Dimensions WXHXD Mass Weight Surround speakers SB HS171
16. PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Customer Services Directory United States and Puerto Rico Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com help or contact us via the web at http www panasonic com contactinfo You may also contact us directly at 1 800 211 PANA 7262 Monday Friday 9am 9pm Saturday Sunday 10am 7pm EST For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases United States and Puerto Rico Purchase Parts Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at http www pstc panasonic com
17. RQT9584 a N Discs that can be played Commercial discs ee Remarks Indicated as DVD Video High quality movie and DVD V music discs VIDEO Video CD Music discs with video VCD Including SVCD Conforming to IEC62107 COMPACT oS COMPACT cD Music discs cD COMPACT DIGITAL AUDIO Recorded discs eae a Formats Indicated as DVD R RW e DVD Video Format DVD V o JPEG format JPEG z R4 7 gt R W DVD R DL e DVD Video Format DVD V RDL R RW R DL 0 VR R RW Video DVD V Recording Format CD R RW e CD DA format cD e JPEG format JPEG e Before playback finalize the disc on the device it was recorded on e It may not be possible to play all the above mentioned discs in some cases due to the type of disc the condition of the recording the recording method or how the files were created gt right Tips for making data discs Note about using a DualDisc The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio CD DA format so playback may not be possible Discs that cannot be played Blu ray Discs HD DVD AVCHD discs DVD RW version 1 0 DVD Audio DVD ROM DVD VR CD ROM CDV CD G SACD MP3 discs WMA discs DivX discs and Photo CD DVD RAM and Chaoji VCD available on the market includin
18. depending on the STB audio setting gt left Setting the audio link with the STB Easy control only with VIERA remote control For HDAVI Control 2 or later You can control the playback menus of this unit with the TV s remote control When operating the TV s remote control refer to the below illustration for operation buttons 1 Select this unit s operation menu by using the TV menu settings For details refer to the operating instructions for your TV The START menu will be shown e g DVD V Playback Disc WTOP MENU DVD lt MENU DVD s Gn e The START menu can also be shown by using a button on the TV s remote control e g SUB MENU When DVD CD is selected as the source the TV s remote control works only during stop mode This feature does not work while the iPod music playback screen is displayed on the TV 2 Select the desired item on the START menu 9 When the on screen control panel appears e g DVD V when Playback Disc is selected from the START menu Tm S E k gt gt pe m You can operate the playback with the indicated controls e The on screen control panel can also be shown by using a button on the TV s remote control e g SUB MENU This works only during DVD CD playback and resume modes or while the iPod music playback screen is displayed on the TV Piaybackmenu access 2 P
19. desired group and press OK e g The JPEG contents of the selected group will be played in random O Picture 1 UA picture a e To return to the previous folder press RETURN You can also do this by selecting R in the menu 2 Press A V G to select the desired content and press OK Play starts from the selected content Repeat play This works only when the elapsed play time can be displayed It also works with all JPEG content During play press and hold REPEAT to show the repeat mode While the repeat mode is displayed press REPEAT to select the item to be repeated e g DVD V Chapter gt Title amp gt Off t To cancel select Off Items shown differ depending on the type of disc and playback mode LL Random mode will be cleared when you change the repeat mode Using on screen menus 1 Press FUNCTIONS to show the on screen menu Each time you press the button Menu 1 Disc eg Menu 2 Video Menu 3 Audio Exit DVD V Menu 1 Disc Current item J11 5mD Title Search Item name 2 Press A V lt to select the item and press OK e g DVD V Menu 1 Disc Current setting C1 J31 5m0D Off Chapter Search 3 Press A V to make the settings and press OK 6G mm mm Play Speed DVD V To change play speed
20. e Bright eDim The display is dimmed e Auto The display is dimmed but brightens when you perform some operations FL Control e On VOL 0 The unit s display will turn off when the volume is adjusted to 0 Off Screen Saver This is to prevent burn marks on the TV screen Q eof 8 e Wait 5 min If there is no operation for 5 minutes the screen saver will J be shown The TV screen will resume when you perform Q some operations This does not work during playback oO Ratings Set a rating level to limit DVD Video play je Setting ratings When level 8 is selected e1to7 8 No Limit When you select your ratings level a password screen is shown The default password is 0000 Enter the 4 digit password with the numbered buttons and press OK You can change the default password gt below Do not forget your password A message screen will be shown if a DVD Video disc exceeding the rating level is inserted in the unit Follow the on screen instructions o a S n X Set Password Change the password for Ratings When you change the password for the first time The default password is 0000 Follow the on screen instructions Restore Default Settings This returns all values in the Setup menu to the default settings except the password and ratings level Press lt gt to select Yes and press OK Turn the unit off and on again
21. from Xx 0 6 to x 1 4 in 0 1 unit steps e Press gt PLAY to return to normal play e After you change the speed Dolby Pro Logic II has no effect Audio output switches to 2 channel stereo Sampling frequency of 96 kHz is converted to 48 kHz e This function does not work with DTS source The play speed will return to x 1 0 e This function may not work depending on the disc s recording Repeat Mode gt 12 Repeat play A B Repeat To repeat a specified section Except Press OK G at the starting and ending points e Select Off to cancel EH Subtitle This does not work during HD JPEG playback gt 16 HD JPEG Mode JPEG Items shown will vary depending on the type of disc Track Search Title Search Content Search Chapter Search To start from a specific item e g DVD V T2 C5 To select 12 210 gt 1 gt 2 gt OK Jj Audio DVD V with multiple soundtracks To select audio soundtrack VCD To select L R L R or L R Actual operations depend on the disc Read the disc s instructions for details Signal type data LPCM OI D DTS MPEG Signal type O 2 Q gt gt gt a DVD V with multiple subtitles To select subtitle language e On R RW a subtitle number may be shown for subtitles that are not displayed eS Angle with multiple
22. item 2 Control reference guide 00 cece e eens 4 Other modes of play 0 e eee eee POWER SAVING FEATURES nauona annona 4 Program and Random play aetrecitedes dejadoridans D Repeat play v cittcaohte didn tka rE o a S A Using on screen menus 000 cee eee Quick Start Guide O step 1 Positioning caa eae Emmis 6 Other Operations step 2 Connections oe enee ee e 6 Linked operations with the TV Speaker connections Pi SKS N Taun 6 VIERA Link HDAVI Control Y Recio EO OLOSI Kaa Te ain Seen nee vk 6 Setting the audio link D Audio and video connections 7 Easy control only with VIERA remote control Q step 3 AC power supply cord connection 8 Using the iPod9 iPhone oloon nnen 2 step 4 Preparing the remote control 8 Qa step 5 Easy SetUD a e cacas n seas sn a mimmin 8 Reference Listening to the radio oloonsa 9 Changing the player settings Presetting stations automatically 0 9 Discs that can be played 0 nnen Listening to a preset channel 05 9 Maintenance 0000cceeeeee cece eens ja Using the START menu 00 cece eee eee 9 Speaker installation option 2 Selecting the source using the Kn control JTE an 9 Troubleshooting guide a an anaana aaaea S Listening to the TV or o
23. of important operating and maintenance servicing instructions in the literature accompanying the appliance 0 W OD E lt SOUND SURROUND CHSELECT FLDISPLAY T I N 2 Panasonic CO The circled numbers indicated in this Owner s Manual e g Press D D correspond to the circled numbers in the above N RQT9584 Control reference guide Turn the main unit on off gt 8 Select channels and title numbers etc Enter numbers gt 9 11 8 Cancel gt 12 Source select DVD iPod Select disc as the source gt 11 Select iPod iPhone as the source gt 15 EXT IN RADIO Select the FM tuner or the external audio source gt 9 FM AUX gt ARC D IN N Basic operations for play gt 11 6 Show on screen menu gt 13 7 Show a disc top menu gt 11 Select or confirm menu items Frame by frame gt 11 O Select the play mode Set the repeat mode gt 12 Select sound mode Turn Whisper mode Surround on off gt 10 11 Select surround sound effects gt 10 or Set the Sleep timer Press and hold SLEEP While the time is shown on the main unit s display press SLEEP repeatedly Each time you press the button SLEEP 30 SLEEP 60 SLEEP 90 gt SLEEP120 t_______ OF F Cancel e To confirm the remaining time press and hold the button again TV ope
24. the main unit and remote control Depending on the number being displayed 1 or 2 press and hold OK and the corresponding numbered button 1 or 2 for at least 2 seconds gt 4 LOADING e The iPod iPhone is not ready Wait for this display to disappear e Disconnect the iPod iPhone and then reconnect it firmly gt 15 Licenses Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HDAVI Control is a trademark of Panasonic Corporation VIERA Link is a trademark of Panasonic Corporation EZ Sync is a trademark of Panasonic Corporation Made for
25. the media and source When a disc is loaded you can also access playback or menus from the START menu e g DVD V o Playback Disc Playback menu access input select um When the on screen control panel appears e g DVD V when Playback Disc is selected from the START menu pu EI ca E gt You can operate the playback with the indicated controls Selecting the source using the remote control Press To select DVD DVD CD iPod IPOD gt 15 EXT IN Each time you press the button RADIOJO FM gt left AUX For audio input through the AUX terminal ARC For audio input through the HDMI AV OUT terminal D IN For audio input through the DIGITAL AUDIO IN OPTICAL terminal gt 10 CO Confirm the audio connection to the AUX HDMI AV OUT or DIGITAL AUDIO IN OPTICAL terminal on the main unit when you select the corresponding sources gt 7 Reduce the volume on the TV to its minimum and then adjust the volume of the main unit R RQT9584 a O RQT9584 Listening to the TV or other device s audio from this unit s speakers Preparation e Make sure that there is an audio connection between this unit and the TV or other device gt 7 e Turn on the TV or and other device Press EXT IN to choose the source that is used to connect this unit to the TV or other device e To change the surround sound effec
26. times to select D IN or ARC 2 Press PLAY MODE and then A V to select the mode While the selected mode is displayed press lt gt to select the desired setting x Only when D IN is selected Be sure to select the device s STB etc input channel on the TV when making the setting The device must be connected to the Panasonic TV via an HDMI cable and to this unit with an optical digital audio cable elf the device s STB etc input channel on the TV is changed or if you want to change the device allocated for the linked operations select the STB mode to OFF in step 3 above and then select SET again This function will not operate if DIGITAL IN is selected in TV Audio gt 17 Enjoying sound effects from all speakers e The following sound effects may not be available or may have no effect with some sources e You may experience a reduction in sound quality when these sound effects are used with some sources If this occurs turn the sound effects off CO When changing the surround sound effect Whisper mode Surround or the sound modes the setting is displayed on the TV screen if DVD CD is the selected source during video playback Enjoying surround sound effects Press SURROUND Each time you press the button For Surround layout Recommended mode STANDARD Sound is output as it was recorded encoded Speaker output varies depen
27. 11 11 during pause e VCD Forward direction only On screen item select A V lt gt OK amp A V lt gt Select OK Confirm Enter number Numbered buttons DVD V VCD CD e g To select 12 210 0 gt 1 gt 2 DVD V Show a disc top menu TOP MENU G DVD V Show a disc menu MENU Return to previous screen RETURN VCD with playback control Show a disc menu RETURN Turn PBC function on off MENU Main unit display FL DISPLAY DVD V Time display lt gt Information display JPEG SLIDE lt Contents number RQT9584 a EN a No RQT9584 Playing from the selected item Using navigation menu CD JPEG You can select to play from your desired item while the navigation menu screen is displayed e g CD Group Folder E Dm Elapsed time Content File Track C N CD DA Track01 O JPEG J Tracks 0 Press A V G amp to select an item and press OK oPress lt P amp to skip page by page Play starts from the selected content JPEG e To return to the previous folder press RETURN You can also do this by selecting Rm in the menu e Maximum 16 characters for file folder name e Only the contents in the current group will be played Selecting the picture in Thumbnail menu JPEG
28. ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE
29. Effective only when Surround layout Recommended mode is selected in Speaker layout gt 8 Easy setup Center and surround speakers only For optimum listening with 5 1 channel sound all the speakers except for the subwoofer should be the same distance from the seating position If you have to place the center or surround speakers closer to the seating position adjust the delay time to make up for the difference d Actual speaker position 1202 Ideal speaker position s OOO Primary listening distance Approximate room dimensions Circle of constant primary listening distance If either distance or is less than find the difference in the table and change to the recommended setting Center speaker Surround speaker Difference Approx Setting Difference Approx Setting 30 cm 1 foot 1ms 150 cm 5 feet 5ms 60 cm 2 feet 2ms 300 cm 10 feet 10ms 90 cm 3 feet 3ms 450 cm 15 feet 15ms 120 cm 4 feet 4ms 150 cm 5 feet 5ms e C Delay Center Delay Oms 1ms 2ms 3ms 4ms 5ms Select the delay time for your center speaker e S RS Delay Left Surround Right Surround Delay Oms 5ms 10ms 15ms Select the delay time for your surround speakers Test Tone Use the test tone to listen to the speaker output to confirm speaker connections Test tone will be output to each channel in the following order
30. INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 NOOR WDM 11 12 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus com
31. Panasonic Owner s Manual DVD Home Theater Sound System Model No SC XH170 s Ww Thank you for purchasing this product For optimum performance and safety please read these instructions carefully Please keep this manual for future reference If you have any guestions contact 1 800 211 PANA 7262 P RQT9584 1P e The illustrations shown may differ from your unit System SC XH170 t 0 wo O E e e Operations in these instructions are described mainly with Main unit SA XH170 the remote control but you can perform the operations on the main unit if the controls are the same P Front speakers SP system Center speaker SB HC171 Surround speakers SB HS171 Subwoofer SB HW190 Accessories Please check and identify the supplied accessories Use numbers indicated in parentheses when asking for replacement parts Product numbers are correct as of November 2011 These may be subject to change To order accessories refer to Accessory Purchases United States and Puerto Rico on page 23 y 1 Remote control N2QAYB000702 1 Remote control battery 1 FM indoor antenna RSAX0002 5 Speaker cables REEX1266A J RED REEX1267A J WHITE REEX1268 J GREEN REEX1269 J GRAY REEX1270 J BLUE 1 AC power supply cord K2CB2YY00059 1 Sheet of speaker cable stickers IMPORTANT SAFETY
32. W LVL Subwoofer Level C FOCUS Center Focus Only when Surround layout Recommended mode is selected in Speaker layout gt 8 Easy setup While the selected mode is displayed press lt gt to make the settings Refer to the following for setting details of each sound effect EQ Equalizer You can select sound quality settings Each time you press lt gt FLAT Cancel no effect is added HEAVY Adds punch to rock CLEAR Clarifies higher sounds SOFT For background music SUBW LVL Subwoofer level You can adjust the amount of bass The unit automatically selects the most suitable setting according to the type of playback source LEVEL 1 lt gt LEVEL 2 lt gt LEVEL 3 lt gt LEVEL 4 o The setting you make is retained and recalled every time you play the same type of source C FOCUS Center Focus Effective when playing audio containing the center channel sound or when DOLBY PLII 10 is selected You can make the sound of the center speaker seem like it is coming from within the TV ON lt OFF Whisper mode Surround You can enhance the audio effect for low volume 5 1 channel sound Convenient for late night viewing Press and hold W SRD to show the current setting While the current setting is displayed press W SRD 40 to change the setting ON lt gt OFF Adjusting the speaker level during playback Only when Surround layout Recommended mode
33. You can select whether audio will output from this unit s speakers or the TV speakers by using the TV menu settings For details refer to the operating instructions for your TV Home theater This unit s speakers are active e When you turn on this unit this unit s speakers will be automatically activated e When this unit is in standby mode changing the TV speakers to this unit s speakers in the TV menu will automatically turn this unit on and select AUX 2 ARC 1 2 or D IN 2 3 as the source e The TV speakers are automatically muted e You can control the volume setting using the volume or mute button on the TV s remote control The volume level is displayed on the main unit s display e To cancel muting you can also use this unit s remote control gt 4 e f you turn off this unit TV speakers will be automatically activated TV TV speakers are active e The volume of this unit is set to 0 This function works only when DVD CD AUX ARC 1 2 or D IN is selected as the source on this unit e Audio output is 2 channel audio CO When switching between this unit speakers and TV speakers the TV screen may go blank for several seconds x1 The selection works only when using an ARC compatible TV x2 AUX ARC or D IN DIGITAL IN works depending on the TV audio setting gt left Setting the audio link with the TV x3 D IN DIGITAL IN works
34. ack modes set on the iPod iPhone will be maintained when connected to the main unit Changes made while the iPod iPhone is connected to the main unit will be kept on the iPod iPhone after disconnecting it About recharging the battery e Recharging during standby mode Ensure that the iPod iPhone battery starts recharging before switching the main unit to standby mode e IPOD gt will be shown on the main unit s display during iPod iPhone charging in main unit standby mode e Check iPod iPhone to see the battery charging condition elf you are not using iPod iPhone for an extended period of time after recharging has completed disconnect it from main unit as the battery will be depleted naturally Once fully recharged additional recharging will not occur Dock Cdhnector to USB Cable not supplied To purchase this cable consult your iPod iPhone dealer S 2 g Q O i o S RQT9584 a 6 5 RQT9584 Compatible iPod iPhone as of November 2011 e Update your iPod iPhone with the latest software before using this unit e iPod iPhone compatibility is based on the operations described in this manual x Subject to the availability of the functions on your iPod iPhone e Compatibility depends on the software version of your iPod iPhone iPod touch 1st 2nd 3rd and 4th generation iPod nano 1st 2nd 3rd 4th 5th and 6th generation iPod classic iPod 5th generation iPhone
35. angles To select a video angle Menu 2 Video Transfer Mode To select the method of conversion for video output to suit the type of material Auto Video e When the content is distorted select Video e This may have no effect with some sources O Zoom To select zoom Normal 1 2 3 Menu 3 Audio m Dialog Enhancer ms To make the dialog in movies easier to hear DVD V Dolby Digital DTS 3 channel or higher with the dialog recorded in the center channel Off On RQT9584 a O a EN RQT9584 Linked operations with the TV VIERA Link HDAVI Control What is VIERA Link HDAVI Control VIERA Link is a new name for EZ Sync VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit and a Panasonic TV VIERA under HDAVI Control You can use this function by connecting the equipment with the HDMI cable See the operating instructions for connected equipment for operational details Preparation e Confirm that the HDMI connection has been made 7 1 Set VIERA Link to On gt 17 The default setting is On 2 Set the HDAVI Control operations on the connected equipment e g TV 3 Turn on all HDAVI Control compatible equipment and select this unit s input channel on the connected TV so that the HDAVI Control function will work properly Whenever the connect
36. ay cause undesired operation Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Support Contact Panasonic Consumer Marketing Company of North America Telephone No 1 800 211 PANA 7262 Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 http www panasonic com anasonic Corporation P icC ion 2011 RQT9584 1P Printed in Malaysia F1111AH1121
37. bination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Unit e To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel Power cord Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs CAUTION Unit e This unit utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Do not place sources of naked flames such as lighted candles on this unit Placement e To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this un
38. consult the dealer gt 6 E76 There is a power supply problem Consult the dealer DVD U11 Disc may be dirty Wipe it clean SET OK SET OK is displayed when the stations are set and the radio tunes to the last preset station ERROR Incorrect operation performed Read the instructions and try again e ERROR is displayed when automatic presetting is unsuccessful Preset the stations manually TUNED STEREO Displayed when receiving stereo broadcasting TUNED Displayed when receiving monaural broadcasting or monaural sound is selected DVD H 7 DVD F E stands for a number e Trouble may have occurred The numbers following H and F depend on the status of the unit Turn the unit off and then back on Alternatively turn the unit off disconnect the AC power supply cord and then reconnect it e If the service numbers fail to clear note the service number and contact a gualified service person 700 stands for a number The actual number following U70 will depend on the state of the main unit e The HDMI connection acts unusually The connected equipment is not HDMI compatible Use the High Speed HDMI Cables The HDMI cable is too long The HDMI cable is damaged REMOTE 1 or REMOTE 2 Match the modes on
39. ding on the source MULTI CH You can enjoy sound from the front speakers as well as the surround speakers and center speaker even when playing stereo sources MANUAL below While MANUAL is displayed press lt P amp to select other surround modes Each time you press lt P DOLBY PLII MOVIE Suitable for movies or videos recorded in Dolby Surround DOLBY PLII MUSIC Adds 5 1 channel effects to stereo sources S SRD Super Surround You can enjoy sound from all speakers with stereo sources STEREO Sound will only be output to the front speakers and the subwoofer from any source Recommended modes to enjoy TV audio or stereo sources from all speakers MULTI CH DOLBY PLII MOVIE DOLBY PLII MUSIC or S SRD For Front layout Alternative mode STANDARD Stereo source is output as 2 1 channel audio When playing surround sources you can enjoy 5 1 channel surround like effect even with all the speakers at the front STEREO You can play any source in stereo Surround sound effect is unavailable A SRD Advanced Surround You can enjoy surround effect with any audio source When the signal is DTS or Dolby Digital DTS or DOLBY DIGITAL will also be displayed respectively x Selected mode in Speaker layout gt 8 Easy setup Selecting sound mode 1 Press SOUND to select a sound mode Each time you press the button EQ Equalizer SUB
40. e available inputs on the TV and the TV output should then be connected to the AUX HDMI AV OUT or DIGITAL AUDIO IN OPTICAL terminal of the main unit v 2 s n gt gt U Quick Start Guide RQT9584 N 8 RQT9584 step 3 AC power supply cord connection step 5 Easy setup To household AC outlet AC 120 V 60 Hz AC power supply cord supplied Main unit rear l a Conserving power The main unit consumes a small amount of power even when it is in standby mode approx 0 2 W To save power when the unit is not to be used for a long time unplug it from the household AC outlet You will need to reset some memory items when plugging back the main unit CO The supplied AC power supply cord is for use with the main unit only Do not use it with other eguipment Also do not use cords from other eguipment with the main unit step 4 Preparing the remote control 2 Insert so the poles and match those in the remote control Press in and lift up R6 LR6 AA 3 Replace the cover e Use alkaline or manganese batteries Use Aim at the remote control signal sensor gt 4 avoiding obstacles Distance Within approx 7 m 23 ft Angle Within approx 20 up and down approx 30 to the left and right The Easy setup screen assists you in making necessary settings Preparation Turn on your TV and select the appro
41. g CVD DVCD and SVCD that do not conform to IEC62107 a ee RQT9584 Region number DVD V The player plays DVD Video marked with labels containing the region number 1 or ALL e g e Do not attach labels or stickers to discs This may cause disc warping rendering it unusable e Do not write on the label side with a ball point pen or other writing instrument e Do not use record cleaning sprays benzine thinner liquids which prevent static electricity or any other solvent e Do not use scratch proof protectors or covers e Do not use the following discs Discs with exposed adhesive from removed stickers or labels rented discs etc Discs that are badly warped or cracked Irregularly shaped discs such as heart shapes Disc handling precautions Tips for making data discs JPEG Extension JPG jpg JPEG jpeg Disc DVD R RW CD R RW e JPEG files taken on a digital camera that conform to DCF Standard Design rule for Camera File system Version 1 0 are displayed Files that have been altered edited or saved with computer picture editing software may not be displayed e This unit cannot display moving pictures MOTION JPEG and other such formats still pictures other than JPEG e g TIFF or play pictures with attached audio e There may be differences in the display order on the menu screen and computer screen e This unit ca
42. guage for disc menus e English e French e Spanish x Some discs start in a certain language despite any changes you make here When the selected language is not available on the disc the default language is played There are discs where you can only switch the language from the menu screen gt 11 TV Aspect Choose the setting to suit your TV e 16 9 Widescreen TV 16 9 4 3 Pan amp Scan Regular aspect TV 4 3 The sides of the widescreen picture are cut off so it fills the screen unless prohibited by the disc e 4 3 Letterbox Regular aspect TV 4 3 Widescreen picture is shown in the letterbox style Time Delay When connected with a Plasma display adjust if you notice the audio is out of sync with the video e Oms Auto e20ms e80ms e100ms When using VIERA Link HDAVI Control with HDAVI Control 3 or later compatible TV gt 14 select Oms Auto Audio and video will automatically be set in sync e40ms e60ms Video Resolution This works only when the HDMI connection is being used Select suitable picture guality for your TV Video recordings will be converted to and output as high definition video e Auto 480i 1080i 1080p Ensure that your TV can support the resolution that you choose If a message screen appears confirm your selection by pressing lt gt to select Yes and press OK If the picture is distorted wait for 15 seconds or press l
43. ion or settings are changed repeat this procedure and reconfirm the points in Setting the audio link gt below Setting the audio link W Setting the audio link with the TV Select AUX ARC or DIGITAL IN for TV audio link Refer to TV audio setting in Easy setup gt 8 or TV Audio in HDMI menu 17 Confirm the TV audio connection to the AUX terminal for AUX HDMI AV OUT terminal for ARC or DIGITAL AUDIO IN OPTICAL terminal for DIGITAL IN on the main unit gt 7 W Setting the audio link with the STB Select D IN for STB audio link Refer to STB setting in Making settings for digital audio input gt 10 Confirm the STB audio connection to the DIGITAL AUDIO IN OPTICAL terminal for D IN on the main unit gt 7 CO e VIERA Link HDAVI Control based on the control functions provided by HDMI which is an industry standard known as HDMI CEC Consumer Electronics Control is a unigue function that we have developed and added As such its operation with other manufacturers eguipment that supports HDMI CEC cannot be guaranteed e This unit supports HDAVI Control 5 function HDAVI Control 5 is the newest standard current as of November 2011 for Panasonic s HDAVI Control compatible eguipment This standard is compatible with Panasonic s conventional HDAVI eguipment e Please refer to individual manuals for other manufacturers equipment s
44. is selected in Speaker layout gt 8 Easy setup Effective when playing 5 1 channel sound or when DOLBY PLII S SRD gt 10 is selected 1 Press CH SELECT to select the speaker Each time you press the button e g C R gt RS gt LS gt SW at J e You can adjust SW Subwoofer only if the disc includes a subwoofer channel e When S appears only the surround speaker channel can be adjusted Both surround speaker levels will be adjusted at the same time 2 While C RS LS SW or S is selected Press A G increase or V amp decrease to adjust the speaker level for each speaker C RS LS SW S 6 dB to 6 dB L R Only the balance is adjustable gt below Adjusting the speaker balance during playback For Surround layout Recommended mode Front speaker balance For Front layout Alternative mode Front and surround speaker balance 1 Press CH SELECT to select L or R While L or R is selected Press lt gt to adjust the speaker balance x Selected mode in Speaker layout gt 8 Easy setup Basic play Preparation To display the picture turn on your TV and change its video input mode e g VIDEO 1 AV 1 HDMI etc to suit the connection to this unit xe 4 Press O O to turn on the unit 2 G 2 Press DVD to select DVD CD oH dS 3 Press 4 OPEN CLOSE to open the disc t
45. it s ventilation openings with newspapers tablecloths curtains and similar items Batteries Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e Mishandling of batteries can cause electrolyte leakage and may cause a fire Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not take apart or short circuit Do not recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place When disposing the batteries please contact your local authorities or dealer and ask for the correct method of disposal CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an eguilateral triangle is intended to alert the user to the presence
46. move the speakers further away from the TV Caution e The main unit and supplied speakers are to be used only as indicated in this setup Failure to do so may lead to damage to the amplifier and or the speakers and may result in the risk of fire Consult a qualified service person if damage has occurred or if you experience a sudden change in performance e Do not attempt to attach these speakers to walls using methods other than those described in this manual step 2 Connections Turn off all eguipment before connection and read the appropriate operating instructions Do not connect the AC power supply cord until all other connections are completed EN Speaker connections Pay attention to the type of speaker and the connector color when you place the speakers Main unit rear Connect to the terminals of the same color Use of the speaker cable stickers is convenient when making cable connections Speakers rear Insert the wire fully taking care not to insert beyond the wire insulation White Blue line e Be careful not to cross short circuit or reverse the polarity of the speaker wires as doing so may damage the speakers EI Radio antenna connection Affix this end of the antenna to a wall or pillar where the reception is best FM indoor antenna Main unit rear supplied CO Use an FM outdoor antenna if radio reception is poor Audio and video connec
47. nnot play files recorded using packet write DVD R RW e Discs must conform to UDF bridge UDF 1 02 ISO9660 e This unit does not support multi session Only the default session is played CD R RW e Discs must conform to ISO9660 level 1 or 2 except for extended formats e This unit supports multi session but if there are many sessions it takes more time for play to start Keep the number of sessions to a minimum to avoid this VEEE U Clean this unit with a soft dry cloth e Never use alcohol paint thinner or benzine to clean this unit o Before using chemically treated cloth carefully read the instructions that came with the cloth Do not use commercially available lens cleaners as they may cause malfunction Cleaning of the lens is generally not necessary although this depends on the operating environment Before moving the unit ensure the disc tray is empty Failure to do so will risk severely damaging the disc and the unit Speaker installation option Attaching to a wall You can attach all of the speakers except subwoofer to a wall e The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg 22 Ibs per screw Consult a qualified building contractor when attaching the speakers to a wall Improper attachment may result in damage to the wall and speakers and personal injury 1 Drive a screw not supplied into the wall At least 30 mm 13 6 4 0 mm s2
48. playback Set HD JPEG Mode to Off if you want to perform zoom function gt 16 Menu is not displayed correctly Restore the zoom ratio to Normal Zoom in Menu 2 gt 13 Display is distorted JPEG This is normal when the display switches to from HD JPEG playback iPod iPhone operation Cannot charge or operate Check the iPod iPhone connection gt 15 o The battery of the iPod iPhone is depleted Charge the iPod iPhone and then operate again e The main unit was switched to standby mode When recharging the iPod iPhone battery ensure recharging starts before switching the main unit to standby mode HDMI progressive video There is ghosting when HDMI progressive output is on This problem is caused by the editing method or material used on DVD Video but should be corrected if you use interlaced output When using the HDMI AV OUT terminal set Video Resolution in Video menu to 480i Or disable the HDMI connection and use the other video connection gt 7 16 Closed captions not displayed When HDMI progressive output is used closed captions will not be displayed Radio Distorted sound or noise is heard Adjust the position of the FM antenna A beat sound is heard Try to keep a certain amount of distance between the antenna and the TV Stations cannot be selected Change the FM frequency step Press RADIO to select FM
49. preset the channel 3 While listening to the radio broadcast Press OK 4 While the frequency is flashing on the display Press the numbered buttons to select the channel CO A station previously stored is overwritten when another station is stored in the same channel preset Using the START menu You can select desired source change the settings access playback menus etc by using the START menu 1 Press START to show the START menu e When using VIERA Link HDAVI Control the TV also turns on when the START menu is displayed e g v 2 s n gt gt U Input select N ceee Hm 00 2 Press A V G to select an item and press OK 6 e To exit press START 49 3 Press A V lt gt to make the setting and press OK When Input select is selected You can select a desired source from the menu e DVD CD gt 11 FM RADIO gt left AUX gt below ARC gt below DIGITAL IN 1 gt below iPod gt 15 x1 TV will appear beside AUX ARC or DIGITAL IN indicating the TV audio setting for VIERA Link HDAVI Control gt 14 x2 STB will appear beside DIGITAL IN indicating the STB audio setting for VIERA Link HDAVI Control gt 14 Quick Start Guide When Setup is selected You can change the settings for this unit gt 16 Other selectable items The items that are displayed will vary depending on
50. priate video input mode e g VIDEO 1 AV 1 HDMI etc to suit the connection to this unit e To change your TV s video input mode refer to its operating instructions e This remote control can perform some basic TV operations gt 4 4 Press O O to turn on the unit e The Easy setup screen appears automatically 2 Press A V amp to select Yes and press OK 3 Follow the messages and make the settings with A V gt and OK elanguage Select the language used on menu screen eTV aspect Select the aspect to suit your TV eSpeaker layout Select Surround layout Recommended mode or Front layout Alternative mode according to your speaker layout gt 6 Positioning eSpeaker check Listen to speaker output to confirm speaker connections eSpeaker output Make surround sound setting for speaker output eTV audio Select the audio input connection from your TV For AUX connection gt 7 Select AUX For HDMI connection gt 7 Select ARC For DIGITAL AUDIO IN OPTICAL connection gt 7 Select DIGITAL IN This will be the TV audio setting for VIERA Link HDAVI Control gt 14 4 Press OK G to finish the Easy setup CO e You can perform this setup anytime by selecting Easy setup in the Setup menu gt 17 o If this unit is connected to a HDAVI Control 3 or later compatible TV via HDMI cable the menu language and TV aspect information will be re
51. rations Aim the remote control at the Panasonic TV and press the button TV O Turn the TV on off INPUT AV Change the TV s video input mode VOL Adjust the TV volume This may not work properly with some models Adjust the volume of the main unit Mute the sound e MUTE flashes on the main unit s display while the function is on e To cancel press the button again or adjust the volume e Mute is cancelled when you switch the unit to standby Select radio stations manually gt 9 Select preset radio stations gt 9 Exit the display Show START menu gt 9 Show a disc menu gt 11 Return to previous screen gt 11 Switch information on the main unit s display gt 11 2 Select speaker channel gt 11 Avoiding interference with other Panasonic eguipment Other Panasonic audio video eguipment may start functioning when you operate the unit using the supplied remote control You can operate this unit in another mode by setting the remote control operating mode to REMOTE 2 The main unit and remote control must be set to the same mode 1 Press EXT IN to select AUX 2 Press and hold 4 OPEN CLOSE on the main unit and 2 on the remote control until the main unit s display shows REMOTE 2 3 Press and hold OK and 2 on the remote control for at least 2 seconds To change the mode back to REMOTE 1 repeat the steps above by replacing 2 with 1
52. ray Load the disc Label facing up 6 Load double sided discs so the label for the side you want to play is facing up SA 5 Press gt PLAYJG to start play e Press VOL to adjust the volume CO e When you press 4 OPEN CLOSE to close the disc tray this unit automatically starts playing the disc in the tray JPEG Only the contents in the current group will be played You can select your desired item to start play gt 12 Using navigation menu e DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED Press E STOP G when you finish to preserve the unit s motor and your TV screen e Total title number may not be displayed properly on R RW 2 Q gt gt a a Basic controls Stop M STOP The position is memorized while RESUME is on the main unit s display DVD V vcD CD This unit can memorize the resume position for the last 5 discs o Press gt PLAY to resume o Press M STOP again to clear the position Pause I PAUSE 6 o Press gt PLAY to restart play Skip SKIP M lt SKIP PPI PIP Ramon C Search SEARCH lt lt SEARCHPP 6 during play Slow motion SEARCH lt lt SEARCHPP 6 during pause e Search Up to 4 steps Slow motion Up to 3 steps e Press gt PLAYJG to start normal play e VCD Slow motion Forward direction only DVD V VCD Frame by frame lt
53. ress iPod amp to select IPOD The music menu screen is displayed e g Artists Albums Songs Press A V G to select an item and press OK e Press lt gt to skip page by page e To return to the previous screen press RETURN 6 Play starts from the selected song e g playback screen 3 of 45 Good morning amp Ronaldo Happy days 2 43 C A Re C g0 Current position Basic controls Button Function gt PLAYJG Play E STOP H1 PAUSE Pause SKIP M lt SKIP PPJ Skip press and hold Search SEARCH lt lt SEARCH G6 mm e Depending on the menu some button operations cannot be performed from the TV s remote control e You cannot input numbers with the numbered buttons on the TV s remote control 0 to 9 Use this unit s remote control to select the play list etc Using the iPod iPhone You can enjoy iPod iPhone music through this unit s speakers Preparation Before connecting disconnecting the iPod iPhone turn the main unit off or reduce the volume of the main unit to its minimum 3 1 Connect the iPod iPhone Main unit t Other methods of playback Shuffle mode Press PLAY MODE several times SHUFFLE SONGS SHUFFLE ALBUMS SHUFFLE OFF Repeat mode Press and hold REPEAT and then press the button several times within a few seconds ONE REPEAT ALL REPEAT REPEAT OFF LL Music playb
54. rgeable 90 days Not attery Packs defective exchange Applicable During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States or Puerto Rico This warranty is extended only to the original purchaser of a new product which was not sold as is Carry In or Mail In Service To find a service center please visit http www panasonic com help or call 1 800 211 PANA 7262 When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid adeguately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is reguired under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF
55. rom the TV can be sent to this unit via the HDMI cable without the need to make an extra audio connection e Refer to the operating instructions of the TV for details Be sure to connect to the TV s ARC compatible terminal Refer to the operating instructions for the TV HDMI cable not supplied HDMI ARC AV OUT AV OUT HDMI ARC Main unit rear W Connection without an ARC compatible TV Optical digital audio cable not supplied DIGITAL AUDIO IN OPTICAL S HDMI cable not supplied HDMI AV OUT Main unit rear Alternative connection to a TV e Use this video connection if the TV s HDMI input terminal is not available AUDIO OUT TV Audio cable not supplied Video cable not supplied Main unit rear Set Top Box cable satellite Blu ray Disc player etc connection Use this connection when you want to output the original surround audio from your STB etc to this unit Connect the optical digital audio cable not supplied from the DIGITAL AUDIO IN OPTICAL terminal on the main unit to the OPTICAL OUT terminal on your STB e f the DIGITAL AUDIO IN OPTICAL terminal is already in use for the TV audio reconnect the TV audio to the AUX terminal using an audio cable CJ If you have various sound sources such as Blu ray Disc player DVD recorder VCR etc connect them to th
56. t gt to select No To accept the setting select Yes again e 480p 720p HD JPEG Mode JPEG This works only when using HDMI connection with Video Resolution gt above set to Auto 720p 1080i or 1080p eOn HD JPEG playback is available JPEG images will be displayed in original resolution e Off During HD JPEG playback there will be no on screen menus gt 13 and on screen displays Black Level This works only for video output from the VIDEO OUT terminal Change the black level of the picture e Lighter e Darker Select to suit the type of equipment you connected to the HDMI AV OUT terminal Select Bitstream when the equipment can decode the bitstream digital form of 5 1 channel data Otherwise select PCM If the bitstream is output to the equipment without a decoder high levels of noise can be output and may damage your speakers and hearing Digital Output o Bitstream e PCM When audio output is from HDMI AV OUT terminal and the connected eguipment does not support the item selected the actual output will depend on the performance of this connected eguipment Dynamic Range On Adjusts for clarity even when the volume is low Convenient for late night viewing Only works with Dolby Digital e Off The full dynamic range of the signal is reproduced Speaker Settings Select the delay time of the speakers
57. ther device s audio from this MeSSageS oie mina heed baie eee AA laa aja a Q unit s speakers 0002 c eee eee eee 10 e Licenses aan sua Saa Ta Yas Sa ka EN a n KKI hae S N Specifications sosis daiak ma msi Naja paa asa jie ees Enjoying sound effects from all speakers Limited Warranty 0uuonnnn O Enjoying surround sound effects 10 Selecting sound mode 000 eeeeeeeee 10 Whisper mode Surround 0 20 0 00 11 Adjusting the speaker level during playback 11 Adjusting the speaker balance during playback 11 o O S n X RQT9584 On a RQT9584 step 1 Positioning How you set up your speakers can affect the bass and the sound field Note the following points o Place speakers on flat secure bases Keep your speakers at least 10 mm 3 32 away from the system for proper ventilation e Placing speakers too close to floors walls and corners can result in excessive bass Cover walls and windows with thick curtains e For optional wall mount refer to page 19 Setup example Surround layout Recommended Standard surround placement Place the front center and surround speakers at approximately the same distance from the seating position The angles in the diagram are approximate i Main unit Center speaker Front speaker Front speaker left N K right k 60 R Subwoofer lt w
58. tible TV v a S N X E RQT9584 N lt 8 RQT9584 A menu screen appears during skip or search vcD This is normal for Video CDs Playback control menu does not appear VCD with playback control Press MENU to change to PBC on and then press RETURN G0 during playback Play does not start If a disc contains CD DA and other formats proper playback may not be possible No subtitles Display the subtitles Subtitle in Menu 1 gt 13 Point B is automatically set The end of an item becomes point B when it is reached The Setup menu cannot be accessed Select DVD CD as the source Sound is distorted The format sampling freguency etc of the digital audio input is not supported by this unit Effects do not work Some audio effects do not work or have less effect with some discs Humming is heard during play An AC power supply cord or fluorescent light is near the main unit Keep other appliances and cables away from the main unit No sound e There may be a slight pause in sound when you change the play speed e f the input source is bitstream set the sound setting to PCM on the external eguipment e When using the HDMI output audio may not output from other terminals No sound from the TV elf the TV is not ARC compatible and only the HDMI connection is used an extra audio connection is necessary gt 7
59. ting of the connected equipment and the main unit e Check that the disc has something recorded on it e During HD JPEG playback there will be no video output from the VIDEO OUT terminal No on screen menus displays JPEG This is normal during HD JPEG playback You have forgotten your ratings password Reset all the settings to Factory Preset While DVD CD is the source and there is no disc inserted press and hold 4 OPEN CLOSE on the main unit and 210 on the remote control until RESET appears on the main unit s display Turn the unit off and on again All settings will return to the default values Some characters are not displayed correctly Characters other than English alphabet and Arabic numerals may not be displayed correctly The VIERA Link HDAVI Control function does not respond Depending on the condition of this unit or the connected equipment it may be necessary to repeat the same operation so that the function can work correctly gt 14 The setting you made in TV Aspect gt 16 Video menu or Display gt 16 Language menu does not work The settings for TV Aspect and Display will automatically follow the information from the TV gt 8 Easy setup x1 When using VIERA Link HDAVI Control with HDAVI Control 3 or later compatible TV x2 When using VIERA Link HDAVI Control with HDAVI Control 2 or later compa
60. tions e To listen to the TV audio on the sound system connect the optical digital audio cable HDMI cable or audio cable Refer to the operating instructions of the respective devices for the settings necessary to output the audio x Only when connecting to an ARC compatible TV Refer to Connection with an ARC compatible TV for details gt below Recommended connection to a TV This connection provides the best picture and audio guality VIERA Link HDAVI Control If your Panasonic TV is VIERA Link compatible you can operate your TV synchronizing with home theater operations or vice versa gt 14 Linked operations with the TV CO e Use the High Speed HDMI Cables e Non HDMI compliant cables cannot be utilized o It is recommended that you use Panasonic s HDMI cable Recommended part number RP CDHS15 1 5 m 4 9 ft RP CDHS30 3 0 m 9 8 ft RP CDHS50 5 0 m 16 4 ft etc e Do not make the video connections through the VCR Due to copy guard protection the picture may not be displayed properly e After connecting with the optical digital audio cable or HDMI cable make settings to suit the type of audio from your digital equipment gt 10 Only Dolby Digital and PCM can be played with this connection W Connection with an ARC compatible TV What is ARC ARC is an abbreviation of Audio Return Channel also known as HDMI ARC It refers to one of the HDMI functions If the TV is ARC compatible audio f
61. trieved via VIERA Link o If this unit is connected to a HDAVI Control 2 compatible TV via HDMI cable the menu language information will be retrieved via VIERA Link Listening to the radio You can preset up to 30 channels The radio settings will be shown on the unit s display Some settings are also indicated on the TV screen Preparation Make sure that the FM antenna is connected gt 6 Presetting stations automatically 1 Press RADIO to select FM 2 Press MENU to select LOWEST or CURRENT LOWEST To begin auto preset with the lowest freguency FM 87 9 or FM 87 5 CURRENT To begin auto preset with the current freguency x To change the frequency refer to Manual tuning and presetting 3 Press and hold OK Release the button when FM AUTO is displayed The tuner starts to preset all the stations it can receive into the channels in ascending order Listening to a preset channel 1 Press RADIO to select FM Press the numbered buttons to select the channel To select a 2 digit number e g 12 210 gt 1 gt 2 Alternatively press v 1 Manual tuning and presetting Select a radio broadcast 1 Press RADIO to select FM 2 Press SEARCH lt lt SEARCHPP 65 to select the frequency eTo start automatic tuning press and hold SEARCH lt lt SEARCHPP 45 until the frequency starts scrolling Tuning stops when a station is found To
62. ts and sound mode refer to Enjoying sound effects from all speakers gt right elf your Panasonic TV is VIERA Link compatible refer to Linked operations with the TV gt 14 for other related functions Making settings for digital audio input Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and HDMI AV OUT terminal on the main unit e Underlined items are the factory presets Available settings Mode Setting DUAL Only works with Dolby Dual Mono MAIN SAP stereo audio MAIN SAP SAP Secondary Audio Program e Set PCM FIX mode to OFF to listen to the MAIN or SAP audio DRC Dynamic Range Compression ON Adjust for clarity even when the volume is low by compressing the range of the lowest sound level and the highest sound level Convenient for late night viewing Only works with Dolby Digital OFF The full dynamic range of the signal is reproduced PCM FIX ON Select when receiving only PCM signals OFF Select when receiving Dolby Digital and PCM signals e When receiving true 5 1 channel surround sound select OFF STB CABLE SAT AUDIO SET Select when setting the main unit to switch to D IN when the input channel of an HDMI connected device STB etc is selected on the TV gt 14 Setting the audio link with the STB OFF Select to cancel this setting 1 Press EXT IN several
63. upporting VIERA Link function Auto lip sync For HDAVI Control 3 or later This function automatically provides synchronized audio and video output This works only when the source is DVD CD AUX ARC 1 2 or D IN 2 3 e When using DVD CD as the source set Time Delay in Video menu to Oms Auto gt 16 Auto input switching Power on link When the following operations are performed the TV will automatically switch the input channel and display the corresponding action Additionally when the TV is off the TV will automatically turn on When play starts on the unit When an action that uses the display screen is performed e g START menu e When you switch the TV input to TV tuner mode or the STB input channel this unit will automatically switch to AUX ARC 1 2 or D IN 2 3 e When you start disc play the TV will automatically switch its input mode for this unit Power off link All connected equipment compatible with HDAVI Control including this unit automatically turn off when you switch the TV off To continue audio playback even when the TV is turned off select Video gt 17 Power Off Link in HDMI menu CO When you press 0 0 only this unit turns off Other connected equipment compatible with VIERA Link HDAVI Control stays on For details refer also to the operating instructions for your TV Speaker selection

Download Pdf Manuals

Related Search

Related Contents

Samsung LW32A23W Εγχειρίδιο χρήσης  Téléchargez le manuel de directives  Déchetterie : mode d`emploi  Elation Professional DMX-512 User's Manual  EL-1607P - Sharp Australia Support  Teo L 433.92 MHz SAW Manuale di installazione tastiera  22CL705 English Manual  取扱説明書 - 三菱電機  Télécharger - Mr Bricolage  Sylvania 6432TE CRT Television User Manual  

Copyright © All rights reserved. Failed to retrieve file