Home

KGN&, > ϯϮs USER MANUAL

Contents

1. Motion After selecting the Motion option press OK or u key to enter the submenu 1 E Motion Press t u key to select the E Motion mode On Demo The moving pictures will be more liquid in On mode Your eyes can also be protected In Demo mode the panel will be divided into two parts to show this function The right part open the function and the left part does not This option is not used in DVI VGA USB mode Detail enhance Press t u key to select the detail enhance mode Off On The detail will be stronger when it is in On mode Noise Reduction Press t u key to select the Noise Reduction mode LOW MIDDLE HIGH DEFAULT Off You can select the right mode to match the pictures 36 Menu system instruction PVR File System WARNING 1 Before connecting your USB device to the TV please back up your files to prevent them from damage or loss of data 2 AUSB disk must be formatted when first used for PVR Any existing data on the disk will be lost during the formatting process Please back up your disk if you do not want to lose this data You are recommended to use a dedicated disk for PVR use only Do not disconnect disk or power during formatting 3 Do not modify PVR files on a PC USB2 supports Playback Recording Software upgrade USB1 only supports playback Please connect your USB device to USB2 port on the back panel before using PVR Note Make sure your USB device is compatible with t
2. Reminder If you press the blue key on the remote controller It will show a command window and you can set the reserve programs Record If press the record key on the remote controller it will show the RECORDER page INFO you can press the INFO key on the remote controller to show information in regards to the program you have chosen OK you can press the OK key on the remote controller to select the channel you want to view Exit once you have selected a channel using the OK key press the Exit key to view that particular channel Install Guide When the TV is turned on for the first time the Installation Guide will appear it consists of 3 parts OSD Language Country Channel Tunning 1 Press A q key to select OSD Language option and change Language E 2 Press A q key to select Country option and change Country Country Australia 3 Press A q key to select Channel Tunning option Channel Tuning and press OK or u to start tuning If you want to exit press EXIT button and select Yes Exit OK lt then press OK button to exit NOTE Install guide will also appear the first time you turn on the TV after performing the Reset function Picture 1 Press MENU key to display the main menu on the screen 2 Press A q key to select Picture option 3 Press u key to enter Picture submenu 4 You can also press the PICTURE key on the remote control to select one of the picture settings OSD Language E
3. Auto Search Press p q key to select Auto Search option Then press OK or u key to start a notice window In this notice window you can select country in the Country Selection option and set Tune Type option Press q button to select Start and press OK button lt av gt Select Menu Return to search then the searching interface will be on the screen as follows eon If you want to exit press p t u button to select Cancel and press OK button to exit an ATV 4 Program s The number of searched channels will be shown on 0 Program s 0 Program s the screen If you set Tune Type to DTV ATV When the searching of ATV channels is over TV will start to search DTV channels When the whole searching is finished all the channels will be stored in memory and a message will appear on the screen as per the diagram on the right Skip Exit NOTE Saving 1 If you want to exit the ATV searching you can press ATV 3 MENU button then a confirmation message will appear WR A Haag on the screen 2 To exit DTV searching press the MENU button a confirmation message will then appear on the screen 3 If you want to exit the whole searching you can press EXIT button 5 Programme s Radio Programme s 31 Menu system instruction Channel A DTV Manual Search In the DTV source you can choose DTV Manual Search to enter DTV Manual Search menu A You can use t
4. preset at the factory 1 Press p q key to select Sound Mode option 2 Press t u key to select one sound mode lt av Select Menu Exit Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides live and full sound for movies Sports Emphasizes bass over other sounds User Selects your custom sound settings See User settings for Sound Balance If the volumes of the left speaker and the right speaker are not the same you can adjust the Balance to suit your personal preference 1 Press p q key to select Balance option 2 Press t u key to decrease or increase the value of the item User settings for SOUND Equalizer 1 Press A V key to select an equalizer item e Balance 2 Press OK or u key to enter the equalizer submenu The sound settings can be adjusted to suit your user preferences g 1 Press A V key to select a particular item r ie 2 Press t u key to decrease or increase the ee KH value of a particular item l Note The adjusted values are stored according eng Select Menu Retum to the selected particular item gt Equalizer 29 Menu system instruction Sound Surround Sound This is used to turn on surround sound to gain better sound effect 1 Press p q key to select Surround sound option 2 Presst u key to select Surround or Off HDMI Sound This option is
5. u button to choose the channel number and aseselectchannel press OK button to enter searching and then the TV will Riven store the DTV channel if there is a DTV signal present et ATV Manual Search In the ATV source you can choose ATV Manual Search to i Taian enter ATV Manual Search menu DTV Manual Search E Storage To You can press t ubutton to change channels which are used to store the searched channels ATV Manual Search Current CH You can see the current channel number and you can presst u button to choose the channel you want to modify Current CH E Search you can use u button to search channels from low frequency to high frequency and use t button to search channels from high frequency to low frequency When you have searched a channel the searching will be paused and you can press it again for other channels after you store the channel Skip Fine Tune In case of unfavorable image or sound of TV program you can use Fine Tune Frequency 58 50 MHz Frequency You can see the frequency of the searched channels Note Remeber to store the channel by pressing RED button after searching Fine tuning Storage To Search Fine Tune GD Exit GD Save lt DAdjust Program Edit You can use p q_ button to choose Program Edit and enter the menu press the Red Green Yellow Blue color button on the remote control to delete rename move and skip programs also you can press FAV button to a
6. 46 TFT LED LCD display screen Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV monitor combo 16 9 wide screen Auto tuning and fine tuning HDMI input Component Compatible 480i 480P 576i 576P 720P 1080i 1080P PC VGA Programmable sleep timer Wide range voltage input No signal automatic power off Input terminals used for external equipment connection 1 x ANTENNA jack 4 x HDMI inputs 1 x computer VGA PC input 2 x USB inputs 1 x COMPONENT input 1 x AV output 3 x AV inputs 1 x SPDIF output 1 x Headphone output Introduction Model KGNFHDLED32VAA KGNFHDLED42VAA KGNFHDLED46VAA Display size 32 Diagonal max 42 Diagonal max 46 Diagonal max LED panel resolution 1920X1080 1920X1080 1920X1080 Speaker output power Power supply 25WX2 110 240V 50 60Hz 25WX2 110 240V 50 60Hz 25WX2 110 240V 50 60Hz TV receive system Digital DVB T Analog PAL BG DK SECAM BG D K Digital DVB T Analog PAL BG DK SECAM BG D K Digital DVB T Analog PAL BG DK SECAM BG D K Frequency range Analog Antenna 46 25MHz 855 25MHz Digital 5 12 27 69 Analog Antenna 46 25MHz 855 25MHz Digital 5 12 27 69 Analog Antenna 46 25MHz 855 25MHz Digital 5 12 27 69 Video in PAL NTSC SECAM PAL NTSC SECAM PAL NTSC SECAM Powe
7. Adjusts the color of objects making them more red or green for a more natural look Tint can only be adjusted when signal is NTSC Adjusting the Backlight You can change the brightness of the entire screen according to your preference 1 Press p q key to select Backlight option 2 Presst u key to select one backlight mode oC Color Temp lt Standard gt w id 5 o a soy Backlight Adjusts the brightness of the whole screen Red 50 Green 50 Adjusting the Color Temp You can change the color of the entire screen according to your preference i 1 Press p q key to select Color Temp option sinh select Menu Retum 2 Press t u key to select one color temp Blue 50 Standard Keeps whites white Warm Makes whites reddish User Select to view your favorite display settings Cool Makes whites bluish 28 Menu system instruction Sound o O O 1 Press MENU key to display the main menu on the screen 2 Press p q key to select Sound option 3 Press u key to enter Sound submenu 4 You can also press the SOUND key on the Sound Mode lt Standard remote control to select one of the sound TAT settings Equalizer Surround Sound HDMI Sound Sound Mode f Auto Volume i y SPDIF Mode You can select the type of special sound settings to be used when watching a given broadcast Your TV has five sound settings Standard Music Movie Sports User that are
8. DVI to HDMI Cable Not supplied Each DVD player STB has a different back panel configuration When connecting a DVD player STB match the color of the connection terminal to the cable 1 Connect a DVI to HDMI Cable or DVI HDMI Adapter between the HDMI 1 HDMI 2 HDMI 3 or HDMI 4 connector on the TV and the DVI connector on the DVD player Set Top Box 2 Connect Audio Cables between the PC AUDIO IN jack on the TV and the AUDIO OUT jacks on the DVD player Set Top Box Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable 20 External Connection Connecting DVD Player Set Top Box via HDMI en This connection can only be made if there is a HDMI Output connector on the external device DVD Player Set Top Box 0 OUTPUT VIDEO AUDIO HDMI Cable Not supplied RF INPUT What is HDMI HDMI or high definition multimedia interface is a next generation interface that enables the transmission of digital audio and video signals using a single cable without compression Multimedia interface is a more accurate name for it especially because it allows multiple channels of digital audio 5 1 channels The difference between HDMI and DVI is that the HDM
9. If the signal strength indicates that the signal Quality 100 e is weak a possible solution is to adjust your antenna Ze strength 100 to increase the signal strength Continue to adjust the antenna until you find the best position with the lt av Select Menu Return strongest signal Signal Information CHANNEL 32 Menu system instruction Time Wi 1 Press MENU key to display the main menu on the screen a Off Tit ff gt 2 Press p q key to select Time option haa 3 Press u key to enter Time submenu on Time Off gt Sleep Timer ojii gt Auto Sleep Off gt gt gt Clock 01 Jan 10 02 Time Zone VIC lt av Select Menu Exit Off On Time In Off Time item press t u button or OK button to enter the submenu set the day amp time to turn off the TV set In On Time item press t u button or OK button to enter the submenu set the time to turn on the TV set when the TV set is in the standby mode You can also choose which day to control your TV setin a week Sleep Timer 1 Press p q key to select Sleep Timer option 2 Press t u key repeatedly until the desired time appears Off 10min 20min 30min 60min 90min 120min 180min 240min Notes The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs Notes When the time is less than 60 seconds remind information will be displayed on the screen Press any
10. Switch to DTV mode HDMI Switch to HDMI1 mode directly press twice to switch to HDMI2 press three times to switch to HDMIS press four times to switch to HDMI4 12 JP a Overview of Remote Control 17 USB Switch to USB mode directly or call the control menu in USB mode Please see the details in Digital Media Player on Page 42 Page43 Page44 18 ASPECT Press this button to switch the screen mode VOLr and VOLs Press these buttons to adjust TV volume PROGr and PROGs Press these buttons to change channel upward or downward In the teletext these buttons are used to display the next page and previous page MUTE Press this button to shut off sound of the TV press again to restore TV sound V1 Button Audio Lang In ATV source the button is used to set NICAM sound system In DTV source the button is used to set the audio language Red Green Yellow Blue Command These four buttons are used to request linked buttons with the current menu page Teletext buttons Detail operation please refer to Teletext in the next page Digital media player control button Including play pause stop previous file next file page up page down back forward is used to control in USB mode Please refer to relevant instruct
11. To avoid the fire no naked flame source such as lighted candles should be placed on the apparatus An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Ensuring the television is not overhanging the edge of the supporting furniture When not in use If you will not be using the TV set for several days the TV set should be disconnected from the AC mains for ie Sd environmental and safety reasons As the TV set is not 5 disconnected from the AC power when the TV is turned off at the standby switch pull the plug from the AC power outlet to disconnect the TV completely However some TV sets may have features that require the TV set to be left in standby to function correctly In the case of lightning unplug the TV set from the outlet immediately Never touch the antenna wire during lightning Do not pull the plug out by the wire Never touch the plug with wet hands Excessive volume from earphones and headphones can cause hearing loss The ventilation should not be impeded by covering the ventilation opening with items such as newspapers tablecloths curtains etc At least 10 cm space should be left around the apparatus for sufficient ven
12. images Cleaning Cleaning and handling the screen MAINS PLUG surface and cabinet Disconnect R Wipe the mains plug with 3 the unit from the AC outlet before AY a dry cloth at regular cleaning To remove dust wipe 7 intervals Moisture and lt gently with a soft lint free cloth If dust may lead to fire or required use a slightly damp cloth electrical shock Use care not to subject the TV s surfaces to detergent A liquid inside the TV could lead to product failure fire or electrical shock Use care not to subject surfaces to bug repellent solvent thinner or other volatile substances as this may deteriorate the surface and finish of the cabinet amp Important Information If a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using cabinets or stands recommended by the manufacturer of the television Only using furniture that can safely support the television e Ensuring the television is not overhanging the edge of the supporting furniture Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and the television to a suitable support Not standing the televisions on cloth or other materials placed between the television and supporting furniture Educating children about the dangers
13. is in either active or standby modes When recording initialises in standby mode the front panel indicators will flash momentarily and there will be no picture output You can intercept the recording by turning on the power and viewing the program that is being recorded The schedules should not overlap and there should be at least 1 min between two scheduled programs RECORDER 9 Nine Digital MALCOLM IN THE MIDDLE 18 Jan 2010 04 54 Mode AUTO Start Date 18 Jan 2010 Start Time 04 30 End Date 18 Jan 2010 End Time 05 00 Gam Schedule Back Gok GWexit lt gt In DTV mode press OK RECLIST to open the recorded list Press p q button to select the recorded file press OK RECLIST to play the recorded file and press the u button to show the recording information Information When playing the gt bb 44 m K4 gt buttons are available Press EXIT to show or hide the control menu Recorded List When the Recorded List is displayed on the screen you can delete files you no longer require Select the desired file RSIS bors using the arrow buttons then press the Red button to delete NOTE Files cannot be deleted during Playback or Recording MALCOLM IN THE MIDDLE To Page 1 S gt CuPage 1 digital media Player Introduction This TV is embedded with one USB port digital media player It can find devices that support
14. is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a structural property of the LED screen and is not a malfunction If the surface of the LCD panel cracks do not touch it until you have unplugged the AC power cord Otherwise electric shock may result Do not throw anything at the TV set The LCD panel may break from the impact and cause serious injury Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may t produce partial after images To prevent this effect reduce the brightness and contrast when displaying still
15. key button to cancel timer function Auto Sleep 1 Press p q key to select Auto Sleep option 2 Press t u key to set it On or Off When Auto Sleep is turned on the TV set will be in the standby mode10minutes later if there is no signal Clock You can modify the time of your TV set but when you switch to DTV program the Clock is decided by the signal from your antenna Time Zone You can choose it to modify your time zone in the TV set 1 Press p q key to select Time Zone option 2 Press t u key to select time zone 33 Menu system instruction Option ee 1 Press MENU key to display the main menu on the screen 2 Press p q key to select Option option 3 Press u key to enter Option submenu fl gt OSD Setting OSD Setting 3 Audio Languages Window You can modify the OSD set to suit your user Lock Hearing Impaired Off preferences Reset 1 Press p q key to select OSD Setting option ee sia 2 Press OK or u key to display the OSD setting menu OSD Language select the proper language OSD Time Set the preferred amount of time for the OSD to be displayed on the screen av gt Select Menu Exit Audio languages 1 Press p q key to select Audio languages option 2 In the Audio languages setting page you can select primary and seconding languages 3 In the Audio languages setting page press p q ke
16. of climbing on furniture to reach the television or its controls Keep small accessories out of reach of children so they are not mistakenly swallowed Table of Contents Accessories Introduction Accessories Features Specifications Stand and wall mounted instructions option Overview of back panel Teletext Installing Batteries in the Remote Control External Connection Antenna connection Connecting VCR Connecting a Camcorder Connecting a DVD Player Set Top Box Connecting a DVD Player Set Top Box with DVI Connecting DVD Player Set Top Box with HDMI Connecting Digital Audio System Connecting Amplifier DVD Home Theater Connecting PC Supporting signals Basic operation Turn the TV on and off Menu operation Menu system introduction Reference Troubleshooting Picture defects and the reason Please make sure the following items are included with your LED LCD TV If any items are missing contact your dealer Owner s Instructions Remote Control CAUTION Do not dispose of batteries in a fire Do not short circuit disassemble or overheat the batteries Danger of explosion if battery is incorrectly replaced please observe polarity Replace only Batteryx2 with the same or equivalent type zI Stand 1 Piece AV cable 2 Pieces DZ rN M8X10 4 Pieces see rear panel of TV M4X10 5 Pieces Mounting screws Stand screws Features Introduction TV adopts 32 42
17. only used in HDMI mode 1 Press p q key to select HDMI Sound option 2 Press t u key to select HDMI Sound mode External Auto Internal Auto Volume Each broadcasting station has its own signal conditions and it is inconvenient to adjust the volume every time the channel is changed Auto Volume automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low 1 Press p q key to select Auto Volume option 2 Press t u key to select On or Off SPDIF Mode This is used to select SPDIF Mode This option is only used in HDMI DTV mode 1 Press p q key to select SPDIF Mode option 2 Presst u key to select RAW or PCM 30 Menu system instruction Channel 1 Press MENU key to display the main menu on the screen 2 Press p q key to select Channel option 3 Press u key to enter Channel submenu gt Color System CHANNEL Sound System Auto Search DTV Manual Search Color System ATV Manual Search i Programme E dit 1 Press p q key to select Color System option Signal information 2 Press t u key to select the color system PAL SECAM lt av gt Select Menu Exit Sound System 1 Press p q key to select Sound System option Sound System lt BG 2 Press t u key to select the Sound system r BG DK gt Auto Search CHANNEL
18. play 2 When you select multi files it will play in sequence 3 If the USB device have only one drive you can t change the drive and the system will select this drive as default 4 You can select up to 200 files at one time Picture Select PHOTO in the file type section and press OK button to show the file list 2 Select one file and press u button to sign it Press ym button to display the picture file When more than one file is selected they will cycle through at the speed of 5 seconds per file If no file is signed press yq button to display all the files in current directory When the file is playing press n button to play pause press m4 button to switch to the next previous file press PgUp PgDn button to zoom in out the picture You 41 C ancy can press navigation button to move the picture while it is zoomed in and press info button to show the current file information 6 Press OK button to show the shortcut menu You can use the arrow keys to navigate around this menu 7 Press EXIT to exit playing MUSIC Select MUSIC in the file type section and press OK button to show the file list Select one file and press u button to sign it Press py button to play the music file When the file is playing press yu button to play pause press p q button to change the musi
19. the multimedia data formats are supported After Auto Tuning only some channels are available USB not playing Picture is distorted Compression of video contents may cause distortion macroblock small block especially on fast moving pictures such as sports and dots pixelization etc action movies Check cable connections make sure a video cable is not Noise from speaker connected to an audio input Low signal level may cause sound distortion Check if the Off Timer is set to On in the Setup menu Sleep Timer may have been enabled If there is no signal for about 10 minutes from an input TV turns off automatically the TV will turn off see Auto Sleep pg 33 If connected to your PC check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV TV turns on Check if the On Timer is set to Onin the Setup menu automatically Black bars on each side will be shown on HD channels when displaying SD 4 3 contents Picture is not shown in Black bars on Top amp Bottom will be shown on movies that full screen have aspect ratios different from your TV Adjust picture size option on your external device or TV to full screen 45 Picture defects and the reason Snowy Picture Snowy picture is usually due to weak signal Adjust antenna or install an antenna amplifier Double Image or Ghosts Double images are usually caused by reflections from tall buildings
20. the security of your connections contact a professional installer Wall mounting instructions optional Your LCD TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied with LCD TV please contact your local hardware store and the mounting holes on the back of the unit We recommend removing the TV stand prior to wall mounting the TV Please see previous page for instructions on removing the stand How to mount the LCD TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M8X10 not supplied Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten wall mounting bracket Not supplied with LCD TV please contact your local hardware store with screws on the wall 3 Carefully check for the strength before releasing the LCD TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 200mm 300mm 400mm Q Q Q Kz o KDL46JS97A Thread hole size M8 x 10 depth TV mounting screw size on the TV General Description Overview of back panel SS You can conn
21. two cables Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable Yellow White Red 17 External Connection Connecting Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV They allow you to view the camcorder tapes without using a VCR TV Rear Panel S VIDEO OUT Yell Camcorder vino our f xt Video Cable Not supplied Audio Cable Not supplied AUDI OUT Each Camcorder has a different back panel configuration When connecting a Camcorder match the color of the connection terminal to the cable 1 Connect a Video Cable between the VIDEO jack on the TV and the VIDEO OUT jack on the camcorder 2 Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO OUT jacks on the camcorder O O I COMPONENT IN 100 0 5 m e Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable fe rt 18 External Connection Connecting DVD Player Set Top Box a The rear panel jacks on your TV make it easy to connect a DVD to your TV DVD Player Set Top Box T
22. Adjust the direction of the antenna or raise it Ghosting may also occur when still pictures are displayed continuously It may disappear after a few moments Radio Wave Interference Wave patterns are moving on the screen which are usually caused by nearby radio transmitters or short wave receiving equipment High Temperature Electrothermal Interference Diagonal or herringbone patterns appear on the screen or part of picture is missing This is probably caused by high temperature electrothermal equipment in a nearby hospital 46
23. I device is smaller in size has the HDCP High Bandwidth Digital Copy Protection coding feature installed and supports multi channel digital audio Each DVD player STB has a different back panel configuration 1 Connect an HDMI Cable between the HDMI1 HDMI2 HDMI3 or HDMI4 connector on the TV and the HDMI connector on the DVD player Set Top Box Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable 21 External Connection Connecting Digital Audio System es The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV Digital Audio System oO mea 2 a Com TV Rear Panel IS Digital Audio Input L AUDIO R AUDIO OUTPUT Coaxial Cable Not supplied 5 1 CH audio is possible when the TV is connected to an external device supporting 5 1 CH 1 Connect an Optical Cable between the SPDIF jacks on the TV and the Digital Audio Input jacks on the Digital Audio System When a Digital Audio System is connected to the SPDIF terminal Decrease the gain volume of the TV and adjust the volume level with the Digital Audio System s volume control Connecting Amplifier DVD Home Theater Amplifier DVD Home Theater o p oM an TV Rear Panel Each external input source device has a differe
24. MALCOLM IN THE MIDDLE MALCOLM IN THE MIDDLE THE SHAK No Information No Information No Information No Information C PreDay GB NextDay G lBSchedule GMB Reminder BPrecord no inro BK GMexit lt gt DTV EPG Electronic Program Guide In DTV mode press EPG button to enter the Electronic Program Disabled Disabled when there is no signal 1 Electronic Program Guide information is provided by the broadcaster and displays scheduled programs for the week ahead depending upon the broadcaster 2 TV program of each channel is listed under the time axis Press t u button to select the channel and press p q button to highlight the program The selected program s background colour will change to white Press INFO button to view the detailed information Press OK to select the desired channel 3 Use the Reminder blue button to reserve programs If the TV is in DTV mode it will automatically turn to the reserved program at the scheduled time Use Schedule yellow button to look up the reminder list 26 Menu system instruction Menu operation 7 Prev Day If you press the red key on the remote controller It will show Previous Day s programs Next Day If you press the green key on the remote controller It will show Next Day s programs Schedule If you press the yellow key on the remote controller It will show the reminder list
25. Press this button to switch to standby mode and press it again to turn TV on Digital buttons 0 9 To select channel with digital buttons INFO This button is used to start the Current Service Banner application that provides information about the current service RECALL Switch to the previous program FREEZE Press this button to freeze the image MENU Press this button to display main menu or exit the menu When you are in the submenu you can press it to return the main menu SLEEP TV will be switched off automatically at preset sleep time if you have set sleep timer Use your remote control to set the sleep timer Press SLEEP button on the remote control then press this button again to set sleep time off 10 20 30 60 90 120 180 240 min Press MENU button to exit when you have set the sleep timer After you have set sleep timer press SLEEP button again you will see the Remaining time Notes The sleep timer you have set will be Cancelled when the TV turns off or if a power failure occurs 9 CH LIST Press it to show channel list on screen 10 FAV Press it to display favorite list 11 Arrow buttons Press these buttons to move cursor up down left right for menu 12 OK REC LIST Press this button to display a list of recorded programs In main menu and submenu it is a validation button GUIDE In DTV source this button is used to start the EPG application Exit Exit the menu DTV
26. R File System option 3 Press OK or u key to enter PVR File System submenu for detailed operation refer to PVR File System in page 37 35 Menu system instruction Function Aspect Ratio You can select the picture size which best corresponds to your viewing requirement 1 Press p q key to select Aspect Ratio option O 2 Press t u key to set the scale mode 6 OPC You can also press Aspect key on the remode control a Coo to select one of the scale modes f Auto 16 9 4 3 Panorama Moive Subtitle Auto La Panorama is disabled when it is in Component HDMI PC USB mode lt a Select Menu Return Screen Saver This option is only used in ATV mode 1 Press p q key to select Screen Save option 2 Press t u to choose on or off OPC Press t u button to select On Off and Demo In On mode according to bright dark screen image changes the system will automatically adjust the allocation of power so as to achieve the effect of energy saving Off is the default setting and disables the OPC function In Demo mode TV will show the OPC effect of real time in the lower right corner of the screen there will be DLC DCC and PW The Demo mode is not available in PC USB and DVI HDMI modes or on signal Note 1 The Demo mode can not show together with other meanus 2 lf OPC is in Demo mode it will turn to On automatically the next time you turn on the TV
27. USB1 1 2 0 including flash disk USB hard disk and digital camera It supports functions as Display pictures Play music files Play video files Display text files Note please do not remove the cable during the data transfer It may cause problems for the system Format Picture JPG JPE PNG BMP Music MP3 WMA AAC Video MPG MPEG RM RMVB MP4 MOV MKV Text TXT Remote Control Button O o ronen O INPUT Description of Playback Buttons Buttons Function Pause Play Stop Previous file Next file Page up Zoom in Page down Zoom out Backward Forward Display the information Display the short cut key A2B Play repeatedly BLUE Time selected Language soundtrack switch video NAVIGATION BUTTONS pqtu yt GBHSOQCQOWMDOOOCSe SUBTITLE Subtitile switch video O00 0000 40 Digital Media Player Device and File Management 1 Press Input button to select USB The screen will display the USB menu as per Figure 1 The menu is divided into four sections including u File type section v File list section w File preview section x File information section The system will search the device automatically If no USB device connects the menu will display NO DEVICE at the bottom of the screen Plug the USB d
28. V Rear Panel S VIDEO Component Cable Not supplied Audio Cable Not supplied Component video separates the video into Y Luminance brightness Pb Blue and Pr Red for enhanced video quality Be sure to match the component video and audio connections For example if connecting the video cable to COMPONENT IN connect the audio cable to COMPONENT IN also Each DVD player STB has a different back panel configuration When connecting a DVD player STB match the color of the connection terminal to the cable 1 Connect a Component Cable between the COMPONENT IN Y PB PR jacks on the TV and the COMPONENT Y PB PR jacks on the DVD player 2 Connect Audio Cables between the COMPONENT IN R AUDIO L jacks on the TV and the AUDIO OUT jacks on the DVD player Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable 19 External Connection Connecting DVD Player Set Top Box via DVI o O O This connection can only be made if there is a DVI Output connector on the external device DVD Player Set Top Box ee ZN TV Rear Panel OUTPUT VIDEO RF NPUT Audio Cable Not supplied
29. c file press M4 button to change to the previous next file press 44 gt gt to fast forward fast rewind press PgUp PgDn to navigate up down the playlist 4 If no file is signed press gt button to play all the files in current directory 5 If the matching LRC file is available the lyrics will be displayed automatically 6 Press EXIT to exit playing MOVIE Select MOVIE in the file type section and press OK button to show the file list Select one file and press u button to sign it Press gt button to display the video file When the file is playing press gt I button to play pause press K4 gt gt 1 button to skip to the next selected video file press PgUp PgDn button to zoom in out the picture then you can use the navigation to move the picture and press the INFO button to display the current file information If the video file contain multi track or multi subtitle press YII SUBTITLE button to switch track subtitle If no file is signed press 1 button to play all the files in current directory While playing files you can press the RED key to select A B to repeatedly play a section You can press the BLUE key to skip to the time of your choice Press EXIT to exit playing Note 1 If there is no sound when playing try to change the track by I II 2 When playing Movie or Pictur
30. cts of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short circuit parts that could result in a fire or electric shock Never spill liquid of any kind on the set Use special caution in households where children are present The apparatus is not suit under 3 year to operate Do not overload wall outlets extension cords or adaptors beyond their capacity this can result in fire or electrical shock Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plug end adaptors and the point where they exit from the appliance The mains plug is used as the disconnect device It shall remain readily accessible and should not be obstructed during intended use Make sure to plug the power cord in until it is firmly inserted When removing the power cord make sure to hold the power plug when pulling the plug from the outlet do not pull the plug out by the wire NEVER touch the plug or power cord with wet hands To disconnect the apparatus from the mains power the plug must be pulled out from the mains socket therefore make sure the mains plug is always easily accessible Important Safety Instructions and Maintenance Important Safety Instructions Do not push or scratch the front filter or place any objects on top of the TV set The image may be uneven or the screen may be damaged
31. dd to your favorite list E DEL You can press RED button to enter DEL menu then choose the channel you want to delete and press RED button again to delete RENAME You can press p q button to choose the channel you want to rename and press GREEN button to enter RENAME menu In this menu you can press t u button to select the character then press p q button to adjust Note Only available in ATV program You can press p q button to choose the channel in ATV mode you want to move and press YELLOW button to move it You can press p q button to choose the channel you want to skip and press BLUE button to skip it when you change channels If you like the program of a channel you can choose FAV button in the GED oio an GUD FAV menu to add it to your favorite list and later you can press FAV button in the remote control to choose your favorite programs as soon as possible 2 42334148 Signal Information Used only in DTV f 1 Press p q_ key to select Signal Information option O TA Programme Edit 2 Press Ok or u key you can see the information of the DTV channel NOTE Signal Quality Signal Strength DTV Only Unlike analogue channels which can vary in reception Signal Information quality digital channels must have perfect_reception 37 quality or you will not receive them at all So unlike Nine Melboume analogue channels you are not able fine tune a digital Modulation 64QAM channel
32. e press page up and page Dn to zoom in and zoom out the display size The zoom function can t support HD Movies Input search time oo oo o00 OK 42 C Digital media Player TEXT 1 Select TEXT in the file type section and press OK button to show the file list 2 Select one file and press u button to sign it Press t button to display the text file 3 When the file is playing press PgUp PgDn button to change the page press I44 ppi button to change the text file 4 If no file is signed press u button to play all the files in current directory 5 Press EXIT to exit playing USB WARNING As the USB device is produced by different manufacturers and of different standards we do not guarantee to support all USB device USB 1 1 may not be compatible with playback of video files It is suggested to use the USB2 0 device As video files from the internet may not be compressed at the same standard and can be converted to another format we do not guarantee to support all the video files which have been format converted 43 rar If you have any problem check the couter measures for each symptom listed beiow The following symptoms may have been caused by inappropriate adjustment rather than actual malfunction of the unit If the trouble persists contact the Customer Care Centre see back page for contact details Symptoms No powe
33. e that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable Supporting signals Input Mode e Resolution Vertical Frequency 780i Component 576p 1080i 50Hz 60Hz 1080p A ertica 720 Resolution p 50Hz 60Hz Frequency 1080i 50Hz 60Hz VG 1080p 50Hz 60Hz eomz pea M eoh PC VGA svea sooxso eomz SVGA 800x600 75Hz Dvi 75Hz DVI HDMI 7024x768 60Hz eomz 1024X7 60Hz 1280X1024 a kia 1280X1024 60Hz 1360X768 60Hz 23 JERS Turning the TV On and Off aa 1 How to turn the TV on or off 1 Insert the power cord plug into a polarized AC outlet If TV is in standby mode Press POWER button on the remote control or amp button on the bottom panel of LED LCD TV Normal picture will be displayed on the screen after 15 seconds If no signal input No Signal will be displayed on the screen If temporary POWER off is required press POWER button on the remote control or button on the bottom panel If you want to completely switch off the power for this unit unplug the power cord plug for this unit 6 After switching off the unit you should wait at least 5 seconds before switching on again Status indication lamp button is lighted In standby mode Auto power off If there is no signal the TV will automatically enter standby mode afte
34. ease refer to the following drawing A ith 300 0 fl insiead A ith 75 0 R i Lead Use a 750hm 3000hm converter 3000hm coaxial cable Antenna cable e od a w 75o0hm coaxial cable Antenna feeder 16 External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system Skip step 1 if you have not yet connected to an antenna or a cable system i Audio Cable Not supplied TV Rear Panel 4 Video Cable Not supplied RF Cable Not supplied Te omo o o Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape Each VCR has a different back panel configuration When connecting a VCR match the color of the connection terminal to the cable Unplug the cable or antenna from the back of the TV Connect the cable or antenna to the ANT IN terminal on the back of the VCR Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN jack on the TV Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO Land AUDIO R jacks on the TV If you have a mono non stereo VCR use a Y connector not supplied to hook up to the right and left audio input jacks of the TV If your VCR is stereo you must connect
35. ect the TV with video devices such as DVD VCD player VCR and video camera to enjoy the high quality picture CF ee Con ow Goo cn _ M Camcorder DVD player PC HDMI output L4 o C Home theatre system with digital input Blu ray disc player i Audio system 10 2 9 Headphone s 5 T a T KORO rw Video game equipment ei ono DVD player lL SS 7 DVD player with component output General Description Overview of front panel The buttons on the lower right panel control your TV s basic features including the on screen menu To use the more advanced features you must use the remote control 1 M lo gt gt O nu T e 5 TV AV Toggles between all the available input sources MENU Press to see an on screen menu of your TV s features PROGr s Press to change programs In the on screen menu use the PROGr s buttons as up down arrow buttons VOL Press to increase or decrease the volume In the on screen menu use the VOL buttons as left right arrow buttons 4 Standby button Press button to toggle between normal and standby mode POWER INDICATOR Red In standby mode REMOTE CONTROL SENSOR Aim the remote c
36. evice into the USB port the system will automatically read and display the device as per Figure 2 The file list section display the folders and picture files of the first drive From the USB menu press t u button to select the file type PHOTO MUSIC MOVIE TEXT Press OK and p q button to select the drive and press OK button to show the file list In the file list section press p q button to select folder if your files are sorted into folders the folders will be displayed If there are no folders only the files will be displayed Press OK button to enter this folder Select J and press OK button to return to the folder list The file that is highlighted will be automatically displayed in the preview window PLEASE NOTE Larger files will take longer to displayed in the preview window Press OK button to show the submenu you can select Play Select Select All Deselect all it will be signed as X if it has been selected PEEN PHOTO MUSIC MOVIE TEXT Page 1 2 RM Stream i FRM Stream MOVIE RMVB Stream wr H 264 RM HD Movie wiv avi USB fUSB2 CSelect POR Enter Men Back Figure 1 Figure 2 Note 1 To play multiple files in sequence the files must be selected first Press u button and assign each file you wish to view with X or select all by pressing OK on the submenu then press 11 to
37. fOOO 15 General Description Installing Batteries in the Remote Control Se a Installing Batteries a fa Open the battery compartment 1 cover on the back side Battery Cover A H 7 30 30 Insert two 1 5V AAA size batteries cme 2 in correct polarity Don t mix old or Point the remote towards the remote used batteries with new ones control sensor of the TV and use it 2xsize within 8 meters AAA 1 5V Putthe used batteries into the recyc fam a e a a a ee pa a caps et E aaa pee ee e a a a ott S ae ling bin since they can negatively affect the environment 3 Closed the cover ee N A Note e One loading of batteries will last for 1 year under normal use e If you do not intend to use the remote controller for a long period of time remove them to avoid damage due to leakage e Do not use old and new batteries together e The batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like External Connection Antenna connection Antenna input impedance of this unit is 750hm VHF UHF 75ohm coaxial cable can be connected to the antenna jack directly if the antenna cable is 300ohm parallel flat feeder cable you need to use the 3000hm 75ohm converter to connect the antenna cable to the antenna jack For details Pl
38. gits for your new password and enter them As soon as the 4 digits are entered the cursor will skip to Confirm Menu Return Password item re enter the same 4 digits and your new password has been memorized Block Program Block Program 1 Press p q key to select Block Program option 2 Press OK or u key to enter Block Program list 9Nine Digital In the program list use Green key to lock or unlock the IBT 20 Nino Digital program Once the program is locked and Lock System BAY 99 nine Digital is on password is needed to enter it Parental Guidance This option only used in DTV mode 1 Press p q key to select Parental Guidance option 2 Press t u key to select the lock level of the Parental Guidance off 3 4 5 6 7 ERM xt Hearing Impaired Specific Hearing Impaired subtitles can be activated subject to availability from broadcaster Note Only available in DTV mode RESET Select the Reset option and press OK oru key to display a confirm box and select Yes or No Note Please use the Reset option with caution as it will return all settings and channel memories to factory default Software Update USB 1 Press p q key to select Software Update USB option 2 Press OK or u key to software update process Note In the software update process do not turn off the power PVR File System 1 Press MENU key to display the main menu on the screen 2 Press p q key to select PV
39. he TV and able to support PVR recording Select Disk Press OK button to enter submenu and press t u to choose the disk for PVR Record Max Time Press t u to set the max time for PVR Record PVR File System PVR File System Select Disk C Select Disk Record Max Time 4Hr Record Max Time Check PVR File System Start USB Disk Format Time Shift Size Speed mpi Disk Remaining Space MB Disk Remaining Space R Exit FORM OK ME Retum lt gt RM Exit FORM OK ME Retum lt 7 gt Record Max Time Set the maximum duration for any recording Check PVR File System Press OK button to check if the disk is suitable for PVR USB Disk Indicates PASS or FAIL for the status of your USB Disk Format Press OK button to enter format submenu The disk must be formatted when first used for PVR Do not disconnect disk or turn power off during formatting When formatting your disk a progress bar will appear on the display NOTE The larger your device the longer it will take to format The device may take many minutes to format this is not a malfunction please wait for the formatting to finish PVR File System PVR File System See s Select Disk Record May Time 4 Check P File System Size USB Dis PVR File System Size All Format SD55Mins HD 18 Mins Disk Remaining Space MB Disk Remaining Space ME ARM Exit FORM ok ME Retum lt gt RM Exit FORM ok MED Retum lt gt PVR File System Time Shift Size This
40. ing angle and path is free of obstructions V HEIGHT value may be set too big restart computer and enter safe mode then set monitor parameters to correct value according to adjustment description Sample phase may be deflected adjust phase according to picture position Although the LCD screen is made with high precision technology and 99 99 or more of the the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a structural property of the LCD screen and not a malfunction Keep the TV away from noisy electrical sources such as cars hair dryers welders and all optional equipment Electrical atmospheric interference such as local or distant lightning storms may cause picture to break up When installing optional equipment leave some space between the optional equipment and the TV Check the antenna and connection Keep the antenna away from any power or input output cables 44 Troubleshooting Check your area is covered by Digital Video Broadcasts Try re tuning or manually tuning missing channels Check that you are using the correct antenna type please see pg 16 Antenna connection Channel cannot be Check if the channel has been blocked in the main menu selected settings Please check connecting USB cable and power supply is connected Hard drive has not been formatted Please make sure USB disk is compatible and
41. ions in the section of multimedia player SOUND This button is used to select the sound mode Standard Music Movie Sports User PICTURE This button is used to adjust user picture mode press this button repeatedly and select one of four settings Standard Mild User Sports A MIX Teletext buttons for mix function please refer to page 15 It is also used for recording function when TV is on DTV mode please refer to page 38 13 O OOO General Description Teletext Teletext is an information system broadcast by certain channels which be consulted like a newspaper It also offers to subtitles for viewers with hearing problems or who are not familiar with the transmission language You can press these buttons to operate the teletext Text Press TEXT button to enter or exit teletext mode Hold Press HOLD button to toggle Hold function on or off When Hold is switched on the page acquisition is stopped When Hold is switched off the page acquisition is started Size Press SIZE button one time to display the upper half of the screen in double height press the SIZE button two times to display the lower half of the screen in double height press three times to display the full screen in normal size Red Green Yellow Blue Command These four buttons are used for quick access to different pages as numbered at the bottom of the screen Index Press INDEX button then index page di
42. kogan KGNC 5 95RHH USER MANUAL Important Safety Instructions and Maintenance Important Safety Instructions ZN CAUTION Risk of electronic shock do not open Do not attempt to service this product yourself as opening or removing covers may expose np you to dangerous voltage or other hazards ae High Voltage Refer all servicing to qualified service personnel Do notopen If the following problems occur Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur Ask your dealer or service centre to have it checked by qualified service personnel When AC power cord is damaged Poor fitting of AC power outlet TV set is damaged by being dropped hit or having something thrown at it Any liquid or solid object falls through openings in the cabinet To reduce the risk of fire or electric shock do not expose this product to rain or moisture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus The screen and cabinet get warm when the TV is in use This is not a malfunction In case of smoke strange noise or strange smell from the unit Turn off the power switch immediately Disconnect the power plug from the power outlet Contact your dealer or service centre Never attempt to make repairs yourself because this could be dangerous B ele Never push obje
43. lect the second channel Then use the RECALL button to quickly alternate between them RECALL is not activated if no channel has been changed after TV turning on 4 Select channels from Channel List or Favorite Channels List Press OK key to select Channel 3 Volume Adjustment and Mute Setup Volume adjustment Press VOLr s key on the remote control or on the TV to display Volume menu adjust the volume of TV between 0 to 100 by using VOLr s key To increase the volume press VOLr key To decrease the volume press VOLs_ key Mute Press MUTE and the sound cuts off The MUTE icon will appear in the lower left corner of the screen To resume sound press the MUTE button again or simply press the VOLr s key 25 JERS Menu operation ooo O O 4 Current Channel Information Press INFO key on the remote control to view current channel information the indications of channel information are listed in the following table 9 Nine Digital Subtitle THE SHAK Protugues Wed Jun 17 2009 09 41 Press EXIT key on the remote control to exit this OSD GUIDE Menu Press GUIDE key to enter GUIDE menu the first line displays current channel number channel name event title and current time The following line displays all programs that will be played on this channel press A q key to select the program you desired 18 Jan 2010 04 54 PROGRAMME GUIDE DTV 9 Nine Digital
44. nglish A gt Picture Mode Standard gt Picture Mode rates Your TV has four picture settings Standard Brightness Mild user Sports that are preset at the Color factory Only User mode can be set to your Eee preference by adjusting particular items such as i Backlight Contrast Brightness Sharpness Tint Color Color Temp 1 Press p q key to select Picture Mode option av gt Select Menu Exit 2 Press t u key to select one picture mode 27 Menu system instruction Picture zn naai i y Standard Selects the picture for optimum display in a normal environment Sports Selects the picture for high definition in a bright room MILD Selects the picture for comfortable display in a dark room User Select to view your favorite display settings see User settings for PICTURE User settings for PICTURE Contrast Brightness Color Sharpness Tint Your set has several settings which allow you to control picture quality 1 Press A V key to select a particular item 2 Press t u key to decrease or increase the value of a particular item Note The adjusted values are stored according to the selected particular item Contrast Adjusts the lightness and darkness between objects and the background Brightness Adjusts the brightness of the picture Color Adjusts the colors making them lighter or darker Sharpness Adjusts the outline of objects to either sharpen them or make them more dull Tint
45. nt back panel configuration When connecting an external device match the color of the connection terminal to the cable 1 Connect Audio Cables between the AUDIO L and R OUT on the TV and AUDIO IN R hence AUDIO L on the Amplifier DVD Home Theater When an audio amplifier is connected to the AV OUT R AUDIO L terminals Decrease the gain volume of the TV and adjust the volume level with the Amplifier s volume control Note 1 Whenever you connect an external device to your TV make sure that power on the unit is turned off 2 When connecting an external device match the color of the connection terminal to the cable 22 amp External Connection Connecting PC es OUT IN IN gt 6e o D O PC PC Audio Cable Not supplied D Sub Cable Not supplied Each PC has a different back panel configuration The HDMI jacks do not support PC connection 1 Connect a D Sub Cable between VGA PC IN connector on the TV and the PC output connector on your computer 2 Connect a PC Audio Cable between PC AUDIO IN jack on the TV and the Audio Out jack of the soundcard on your computer You should set PC software before you connect a PC to your TV please refer to PC Display settings Note 1 Whenever you connect an external device to your TV make sur
46. nto standby mode while in Time PLAY Shift mode A message will appear on the display PAUSE prompting you to continue or cancel 38 Menu system instruction PVR E Instant recording 1 Select the desired channel then press the RECORD button on the remote control to start recording the current broadcast a progress bar will be displayed at the bottom of the screen During recording the progress bar will fade out after 10 seconds 2 Recording stops when you press the STOP button and the recorded file is stored in the external USB device automatically NOTE You can only watch channels on the same frequency as the program being recorded If you try to change to another channel a message will appear prompting you to continue or not Recording in progress Change channel will stop recording Yes or No Recording in standby mode This unit is able to do recording while in standby mode 1 Start a recording then press the power button A message will be displayed prompting you to continue or cancel Recording REC 9 Nine Digital 04 56 00 00 13 Remain At EPG menu press button to reserve record the selected program At reserve record menu press t u button to adjust the scheduled time press OK to save the setting and press the yellow button to check the record schedule Recording will proceed when the TV
47. ontrol towards this spot on the TV POWER SWITCH gt O os ee Note 1 Sensor lights will turn off within 6 seconds of the last operation 2 In order to avoid errors the TV will go into standby mode after touching the standby button for 2 seconds In standby mode the standby indicator will remain illuminated all other indicators will be off 3 When the sensor indicator lights are off they are still active and will respond to the first touch 4 Please do not touch the buttons in rapid succession 5 When the TV initialises during power up all sensor lights on the front panel will flash sequentially cycling from left to right When the TV has finished the initialising process the cycle will cease and all light indicators will remain off until touched 6 When recording in normal standby mode the logo will cycle from bright to dull for the duration of the recording see logo led pg 36 for details 11 General Description Overview of Remote Control power l INFO 1 INPUT This button is used to switch among different sources DTV ATV AV1 AV2 AV3 Component PC RGB HDMI1 HDMI2 HDMI3 HDMI4 USB Select a source and press OK button to confirm POWER
48. ot hang over or destabilize the TV doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions at the start of this manual For added stability install the anti fall device for safety purposes as follows ALTERNATIVELY To secure the TV to the wall 1 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase them separately 2 Remove the screws from the centre back of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product In this case please purchase the screws of the following specifications Screw Specifications for a 46 55 Inch LED TV M8 X L10 Stand and wall mounting instructions optional 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable Install the TV near to the wall so that it does not fall backwards It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Remove the cable before moving the TV 4 Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about
49. r No picture Good picture but no sound Good sound but abnormal color or no picture No response to remote control Full screen flickering under VGA Horizontal stripes under VGA Colored dots may be present on the screen Picture is breaking up Possible solutions Please check the power cord plugged in and that the power outlet works ry Unplug ine power cord and plug it in after 60 seconds and restart the TV Please check antenna connection Station may be experiencing problems please tune to another station Please adjust the settings of contrast and brightness Please increase the volume Please check TV is under mute mode press MUTE button on the remote control Please check sound settings If external devices are being used check their volumes are not set too low or turned off If using AVI or Component inputs please make sure cables are connected prpoerly and not loose If using DVI to HDMI cable a separate audio cable is required Make sure a headphone jack is not connected Please check antenna connection and antenna condition If using Component input please check Component connections incorrect or loose connections may cause colour problems or cause the screen to be blank Batteries of remote control may have exhausted if necessary please change the batteries Clean the remote control lens The distance between LED TV and remote control should be within 8m within recommended operat
50. r 10 minutes See Auto sleep pg 34 for more details Memory before turning TV off The picture and sound settings and preset channels will be memorised at the point when the TV is turned off When the TV is started up again it will work accordingly with these settings 24 Basic Operation Menu operation eooo O O Input Setup Press INPUT key on the remote control to enter INPUT SOURCE menu There are twelve options for you to select ATV my DTV AV1 AV2 AV3 Component PC RGB HDMI1 HDMI2 ATV HDMI3 HDMI4 and USB Use A q key to move the cursor to AG the input you desired and press OK key to confirm AN3 Component 2 PC RGB 2 Channels Selection HOMIL There are four ways to select channel rae 1 Using number keys and OK keys on the remote control to HDMI4 select channel directly To select channel 90 press 26 USB When you use the number buttons you can directly select channels that were either erased or not memorized 2 Using PROGr s key on the remote control or on your TV to select channel When you press the PROGr S_ key the TV changes channels in sequence You will see all the channels that the TV has memorized You will not see channels that were either erased or not memorized 3 Press RECALL key to return to previous channel press it again to return to current channel To quickly switch between two channels that are far apart tune to one channel then use the number keys to se
51. r consumption 95W 135W 160W Standby consumption lt 1W lt 1W lt 1W Antenna Input 75 ohms unbalanced 75 ohms unbalanced 75 ohms unbalanced Controller power 3 TV with stand Dimensions DC 3V Two AAA size batteries 782X240X560mm DC 3V Two AAA size batteries 1019X255X709mm DC 3V Two AAA size batteries 1112X275X756mm LXWXH TV without stand 782X41X525mm 1019X43X669mm 1112X42X724mm Weight TV with stand Net weight Net weight TV without stand 11Kg 8 1Kg 17 6Kg 14 2Kg 20 7Kg 16 6Kg Work Temperature 0 C 40 C 0 C 40 C 0 C 40 C Note Design and specifications are subject to change without notice Weight and Dimension shown are approximate Stand and wall mounting instructions optional How to assemble the stand If you need to remove or assemble the stand please read the following instructions Before attaching detaching the stand make sure to turn off the TV Before performing work spread cushioning over the base area to lay the LED TV on This will prevent it from being damaged Screws 5 M4X10 a Assembling instruction 1 Fix the stand and the unit together with 5 screws 2 To remove the stand reverse instructions as above Securing the TV Stand Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do n
52. setting is available to adjust only SEDER 5 after the disk has been formatted The maximum Time Record Max Time 4Hr Shift Size is 8G Check PVR File System SUCCESS Speed Display the disk writing reading speed pee Disk Pass Please note It is suggested that you use a disk with Time Shift Size SENE speed that is greater than 4500KB S Speed SSSSSEEEEEEEE 3008KB s Disk Remain Space Display the remaning space for PVR DEK Ramelis SE gak WS NOTE The times listed are not precise only for reference R Est GOR ok B Reim lt gt 37 Menu system instruction PVR Guide If the disk for PVR is ready the programs can be Ce was recorded in DTV mode For Time shift In DTV mode press 1 button to pause the DTV program press it again to continue play The length of time a program can be paused depends upon the setting in the PVR File System Press EXIT to show or hide the control menu 00 00 38 00 04 00 1 Current time behind live TV 2 Total allowable time for time shifting please see pg 37 PVR File System for details in regards to setting the Time Shift Size The progress bar will fade out in 10 seconds Press the PLAY button to continue playing the program STOP RECORD from the point where it was paused sue il BACK NOTE Time Shift will stop if you change channels IFORWARD change inputs or go i
53. splays Reveal Pressing this button will reveal any hidden data answers to quizzes for example Press the REVEAL button again to return to normal screen 14 General Description Teletext Cancel The CANCEL button will exit from any Teletext on the display Press CANCEL button again to exit Teletext and return to live TV broadcast Subtitle Turning the Teletext subtitles on or off Subtitles is a separate mode with only a few buttons available There will be no OSD visible other than the Teletext Subtitles Taro Subcode Subcode mode gives the possibility to select certain subcode pages of a Teletext page Entry of digits within the range 0 9 for current subcode entry If the digit completes the entry a page request is started Press PAGE PAGE buttons to change the subcode pages Time This button is used to show the time of the Teletext Digital buttons 0 9 You can press them to enter the number of the Page required Page Page You can press them to change page upward or downward Mix Press MIX botton the teletext page changes transparent TV content and teletext page content will display at the same time Press MIX button again to exit MIX mode O
54. tilation The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Place the apparatus in such a position that the screen is not exposed to direct sunlight It is best to have soft indirect lighting while watching and avoid completely dark environments and reflection from the screen as these may cause eye fatigue Keep the TV set away from any equipment emitting electromagnetic radiation Important Safety Instructions and Maintenance Installation Do not place the set on an unstable cart stand table or shelf The set may fall causing serious personal injury as well as damage to the product Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn Do not place this apparatus near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or a swimming pool and the like When the TV being moved in from cold place it needs some right time for dew inside unit evaporating fully before turn on the unit To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions LCD Screen Although the LED screen
55. y to select the audio languages lt av gt Select sMenu Retun NOTE This option is only used in DTV Audio Languages WEE English English Window This option is only used when PC mode has signal 1 Press p q key to select Window option 2 Press OK or u key to display the Window menu wAuto Adjust Allows you to set the TV to self adjust to the incoming PC video signal The fine coarse and position values are adjusted automatically vH Postion Set horizontal position of picture W Postion Set vertical position of picture wClock Phase Remove or reduce picture noise A gt Auto Adjust x H P osition o V Position Clock Phase av gt Select Menu Return 34 Menu system instruction Option Lock The lock feature requires a Password to be entered before any settings can be changed 1 Press MENU key to display the main menu on the screen 2 Press p q key and select Lock under the Option menu 3 Press OK or u key to enter Lock submenu Enter Password menu will appear enter your 4 digit password to enter Lock submenu the default and universal password is 9999 the almighty password is 1980 Lock System 1 Press p q key to select Lock System option 2 Press t u key to select On or Off Set Password 1 Press p q key to select Set Password option 2 Enter your 4 digit password to enter enter Change Password submenu Choose any 4 di

Download Pdf Manuals

Related Search

Related Contents

  Loo, 2009 - Aaron French  Olympus C-450ZOOM Digital Camera User Manual  Administration  PLAN-G USER MANUAL  F18 - 3U  Fujitsu P63XHA30 Tv User Guide Manual Operating Instructions Pdf  Mise en page 1 - Association Française des Fundraisers    Mastic sanitaire acétique Transparent cartouche 310 ml  

Copyright © All rights reserved. Failed to retrieve file