Home

Untitled

1. the remaining time of the whole disc is displayed When remaining time is displayed the time is preceded by a sign A third press of the TIME key returns the display to the normal indication of elapsed track time REPEAT A single press of the REPEAT key puts the player into REPEAT 1 mode and the REPEAT 1 icon will be illuminated at the bottom of the display The currently playing track will play to the end and then be repeated ad infinitum When the REPEAT key is pressed a second time REPEAT ALL mode is engaged and the REPEAT icon will be illuminated at the bottom of the display When the disc has played to the end it will immediately return to the first track and start playing again ad infinitum A third press of the REPEAT key returns the player to normal operation Track number keys 0 9 Direct access to any track is possible using the numbered keys on the remote handset To play a specific track e g track 26 press the track number keys 2 then 6 After the second key is pressed the player will play track 26 If only one key e g key 2 is pressed the player will pause briefly before playing track 2 DIM Calendar and Display Off The DIM key may be used to activate the track calendar or to switch the display off while a disc is playing The first press of the DIM key will switch on the track calendar at the right hand side of the display The track calendar displays
2. CD When using the CD player selecting mute from the remote control will mute the amplifier and pause the CD When the amplifier mute is cancelled the CD will continue playing Power Saving Mode Amplifier The amplifier will switch the CD Player or Tuner into standby if either source remains unselected for more than ten minutes Automatic Switch On CD Tuner If the standby button on the Tuner or CD player is pressed the amplifier will also awaken and select the correct source CARE AND HANDLING OF COMPACT DISCS e Fingerprints and dust should be carefully wiped off the disc s signal surface shiny side with a soft cloth Unlike vinyl records the CD has no grooves to collect microscopic debris so gentle wiping with a soft cloth should remove most particles Wipe in a straight motion from the inside to the outside of the disc Small dust particles and light stains should have absolutely no effect on reproduction quality e Never use chemicals such as record sprays or fluid benzene or other solvents to clean CDs Such chemicals will irreparably damage the disc s plastic surface e Discs should be returned to their case after use to avoid serious scratches that could cause the laser pickup to skip e Do not expose discs to direct sunlight high humidity or high temperatures for extended periods Long exposure to high temperatures can warp the disc e Do not stick paper or write anything with a ball point pen on
3. display will be the same as during normal play except that the PROGRAM icon remains illuminated and all the normal control functions can be used including Repeat and Repeat 1 but not Shuffle The TIME key will switch the display between elapsed track time remaining track time and remaining program time lf the SHUFFLE key is pressed the program is erased and the player immediately enters Shuffle mode If STOP is pressed during program play the player returns to the Program Stop state If STOP is pressed again in the Program Stop state then Program mode is deleted and the program erased Pressing OPEN CLOSE will also leave Program mode and delete the program Repeat A B This key allows a specified section of a track or disc to be repeated First play the CD until it reaches the desired start point and press the A B key A display icon will illuminate reading REPEAT A Continue to play the disc until the desired end point is reached and press the A B key again The display will then read REPEAT A B and the desired selection will be played repeatedly To cancel A B repeat mode press the A B key once more the REPEAT A B icon will be switched off and normal play will resume Pressing either SKIP lt gt or SCAN gt automatically exits REPEAT A B mode STANDBY Pressing the STANDBY key sends the command to switch your Myryad Integrated Amplifier or Preamplifier into
4. finished playing 8 Skip scan lt gt The SKIP SCAN keys are used to select the track or section within a track to be played A brief press of one of these keys invokes the SKIP function Pressing the key and holding it down continuously invokes the SCAN function While a disc is playing pressing SKIP SCAN gt briefly will cause the player to skip to the beginning of the next track If SKIP SCAN is pressed once the player will skip to the beginning of the current track lf SKIP SCAN is pressed twice in quick succession the player will skip to the beginning of the previous track Repeated pressing of SKIP SCAN P or d will make the player skip forward or back over any number of tracks When playing the last track of a disc SKIP gt will wrap around to track 1 and similarly SKIP irom track 1 will skip to the last track The SKIP keys have the same function in PAUSE mode The SKIP function may also be used in STOP mode to select a track number The selected track will play automatically shortly after the last key press The SCAN function is used to select a specific passage within a music track While a disc is playing pressing SKIP SCAN Por dana holding it down continuously will cause the laser to scan rapidly forward or backward through the music Snatches of music will be heard through the loudspeakers at a reduced volume level If the SKIP SCAN key is held down longer the player will scan faster but the
5. or out of standby If the Z112 is My Linked to the Integrated Amplifier or Preamplifier then it too will be switched into or out of standby It is also possible to switch only the Z112 into or out of standby by using the CD STANDBY command Press and hold down the CD key on the bottom row of the handset then press the STANDBY key at the same time This will switch the standby status of the Z112 without affecting any other unit SYSTEM OPERATION WITH SMART MY LINK When used as a linked system which must include a Smart My Link equipped Integrated Amplifier or Preamplifier Myryad products equipped with Smart My Link have a number of extra features that make the system as a whole easier and quicker to use than a normal hi fi These include Start on Play CD Press play on the CD player or the remote control and both the CD player and amplifier will switch out of standby if necessary and play the CD The amplifier will automatically select the CD source Start on Open CD Press open close on the CD player or the remote control and both the CD player and amplifier will switch out of standby if necessary and the CD drawer will open The amplifier will automatically select the CD source Intelligent Input Selection Amplifier Press a source select button on the remote control and the system will awaken only the amplifier and the selected source if in standby Mute Pause Control Amplifier
6. the disc surface INSTALLING AND REPLACING BATTERIES The remote handset uses two 1 5 V type AAA batteries To fit new batteries first open the battery compartment at the base of the handset and remove any existing batteries Fit the new ones as directed by the symbols moulded inside the battery compartment then replace the battery compartment cover The batteries should always be removed if they are discharged indicated by no remote control operation or by operation only at very short range or if the remote control is not going to be used for an extended period SPECIFICATIONS Disc capacity Digital to Analogue Converter Frequency Response THD Signal to Noise Ratio Channel Separation Output Level at 0 dB Output Impedance Digital Code Output Physical Specification Dimensions width x height x depth Weight Net TROUBLE SHOOTING GUIDE Some of the most common problems No sound Power turned off or system in standby mode Check that the LED by the STANDBY button is illuminated blue Amplifier source selection incorrect Check that CD is selected UK version only The fuse in the mains plug has failed Check and replace if necessary Disc does not PLAY No CD is inserted Insert a CD label side up The CD has been loaded upside down Re load the disc label side up The CD is badly scratched or dirty Check the CD and clean or replace as necessary The CD skips part of
7. the music The CD is badly scratched or dirty Check the CD and clean or replace as necessary Sound in one channel only Interconnect cable pulled loose or making poor contact Check and if necessary un plug and re plug all cables Loud buzz or hum Interconnect cable pulled partially out of its socket Defective interconnect cable Incorrect operation some functions not working e Control processor latched Switch off POWER on rear panel and wait for at least one minute Then switch POWER on and switch out of standby Normal operation should resume For further help please visit the Myryad website at www myryad co uk 120 or 80mm 24 bit 192kHz fifth order Delta Sigma lt 0 5dB 20Hz 20kHz 0 0025 1kHz 105dB A weighted gt 80 dB 20Hz 20kHz 2 3Vrms 240 Ohms Coaxial 75Q to SPDIF standard 436 x 78 x 286mm 5 3 kg Af MOUF HOME ELECTRONICS Stortford Hall Industrial Park Dunmow Road Bishops Stortford Hertfordshire CM23 5GZ www armourhe co uk This symbol means do not dispose of as municpal waste Re use or recycle wherever possible Electrical Electronic Equipment may contain substances harmful to the environment For environmentally sound methods of disposal Mmmm please contact your local government agency Revision 2
8. DIGITAL OUTPUT OUT MY LINK IN CLASS1 LASER PRODUCT REAR PANEL CONNECTIONS 1 Power Inlet Before making any connection check that the mains voltage marked on the rear panel is the same as your local mains supply Plug the female socket end of the power cord into the power inlet on the rear of the CD player making sure it is pushed in firmly Plug the male plug end of the cord into a live wall socket or a suitable heavy duty extension cable 2 Power Switch Press one side of this rocker switch the side nearer the edge of the rear panel to switch the CD player ON and the other side towards the output sockets to switch it OFF When the POWER switch is in the OFF position all power is disconnected from the CD player In this condition the CD player cannot be powered up from the front panel or the remote control When the POWER switch is in the ON position and the power cord correctly inserted and plugged in to a live wall socket the CD player will power up in standby mode see FRONT PANEL CONTROLS STANDBY page 4 It is recommended that the POWER switch is turned OFF if the CD player is not going to be used for an extended period of time 3 Digital output This is a serial electrical digital output to the SPDIF standard It should be connected via a suitable interconnect to the SPDIF input of a separate DAC Digital to Analogue Converter di
9. Z SERIES Z112 Remote Controlled CD Player Owner s manual i a MYRYAD www myryad co uk CONTENTS e Accessories e introduction e installation and Safety e Setting up your CD player Rear panel connections e Operating your CD player Front panel controls e Remote Control Handset Operation e System operation with Smart My Link e installing and replacing batteries in the remote control e Care and handling of compact discs e Trouble shooting guide e Specifications INTRODUCTION The Myryad Z112 has been designed to offer a combination of high quality sound reproduction and elegant styling in keeping with other Myryad Z Series products The Z112 is a full function remote controlled CD player It has fixed level low impedance audio outputs to drive a Myryad integrated amplifier or pre amplifier or other high quality amplifier In addition it has a digital output on a single RCA phono socket SPDIF standard suitable for feeding a digital recorder or processor The Z112 also has a Smart My Link control input and output for communication with other Myryad Z Series or MX Series products The Z112 offers a range of expansion possibilities The digital output can be used to feed a digital recorder or processor The Smart My Link input can be connected to a Myryad integrated amplifier or pre amplifier so that the Z112 will automatically be switched
10. d NO DISC When a disc is inserted and the drawer closed the display will indicate READ briefly while it reads the disc s Table of Contents TOC The display will then show the total number of tracks and total playing time of the disc see Figure 2 This condition is called STOP mode Table of contents Figure 2 TRACK MIN SEC 6 PLAY PAUSE When a disc is present and the player is in STOP mode a single press of the PLAY PAUSE key will start the disc playing from the first track and illuminate the symbol When the disc is playing pressing PLAY PAUSE again will put the player in PAUSE mode and illuminate hese Figure 3 In PAUSE mode the disc is still spinning and the laser head is kept at the same location so that if PLAY PAUSE is pressed yet again the disc will re start from exactly the same point in the music at which it was originally paused With the disc drawer open it is possible to load a disc and press PLAY PAUSE directly without pressing OPEN CLOSE This action causes the drawer to close and the disc to start playing from the first track The TOC is not displayed Pause mode Figure 3 TRACK MIN SEC 7 Stop When the STOP button is pressed the music stops playing the disc stops spinning the laser head is returned to the beginning of the disc and the TOC is displayed The player is now in STOP mode The player automatically returns to STOP mode when a disc has
11. e same SKIP function as the front panel keys but they cannot perform the SCAN function Scan lt gt These keys allow direct access to the SCAN function which can also be accomplished by pressing and holding down one of the front panel SKIP SCAN lt P keys SHUFFLE When in STOP mode press the SHUFFLE key The SHUFFLE icon will light at the bottom of the display and the disc will start to play in SHUFFLE mode playing all the tracks on the disc in random order In SHUFFLE mode when any track ends the remaining unplayed tracks are shuffled for about a second and a random new track selected SHUFFLE mode can also be entered direct from normal PLAY mode when pressing SHUFFLE will cause the player to jump immediately to a new randomly selected track Pressing SKIP P in SHUFFLE mode will cause the player to shuffle and select the next new track Pressing SKIP tin SHUFFLE mode has no effect Pressing SHUFFLE again returns the player to normal operation Pressing SCAN Por 4 in SHUFFLE mode will also cause the player to drop out of SHUFFLE mode and return to normal operation TIME The TIME key controls what is shown in the time MIN and SEC section of the display when a disc is playing During normal play and in pause mode the display shows the elapsed time of the track currently being played see Figure 3 If TIME is pressed once the remaining time of the current track is displayed If TIME is pressed again
12. follows In STOP mode first press the PROGRAM key to enter Program mode The small PROGRAM icon at the bottom of the display will start to flash This indicates that the player is in Program Enter mode waiting for a track number Use the number keys on the remote control to enter the number of the first track to be programmed one or two digits as necessary When the track number has been entered it will appear in the track section of the display followed by P 1 indicating that this is the first programmed track Then proceed to enter the second track in the same manner If you make an error press the STOP button or the STOP key on the remote and the currently displayed programmed track will be deleted Continue entering tracks up to a maximum of 16 until your program is complete The display will be similar to that shown in Figure 4 Program mode Figure 4 PROGRAM If you now press PLAY or PLAY PAUSE the PROGRAM icon will stop flashing and the programmed tracks will play beginning with from program step 1 Alternatively if you press PROGRAM the PROGRAM icon will stop flashing and the display will show the total number of tracks programmed followed by the total time of the program From this Program Stop state you can add more tracks to your program by pressing PROGRAM to go back to Program Enter mode or press Play or Play Pause to play the programmed tracks Whilst playing a program the
13. gital pre amp or digital recorder The cable should be of standard 75Q impedance for best performance 4 My Link input output When this CD player is used in a system with other Z Series products or Myryad MX Series all may be joined together via the My Link My Link is a communications bus that allows all the linked components to operate together as a system and distributes the remote commands received by any one to each of the others The simplest function provided by the My Link bus is that all linked units will switch into or out of standby mode when the amplifier s front panel or remote control standby key is pressed The My Link bus allows any linked product to be remote controlled via the CD player s infra red receiver or vice versa The CD player or any other product on the My Link bus can be controlled from a remote room via a suitable interface to the My Link bus Use a short RCA to RCA phono to phono interconnect cable to connect from the MY LINK IN socket on the Z112 to the MY LINK OUT socket on the amplifier A second cable may then be run from the MY LINK OUT socket on Z112 to the MY LINK IN socket on a Myryad tuner daisy chain fashion Further compatible Myryad products can be linked in the same way running from the MY LINK OUT socket on the tuner Inexpensive interconnects may be used as the My Link bus carries only control signals not audio so these cables have no effect on sound
14. in and the display will be extinguished CAUTION WHEN IN STANDBY MODE THE INTERNAL CIRCUITRY OF THE Z112 IS STILL LIVE SO ALL SAFETY PRECAUTIONS MUST BE FOLLOWED 2 Display The operation of the player is indicated on a high quality blue Vacuum Fluorescent Display VFD Track number and track time are shown simultaneously together with indication of the operating mode see Figure 1 below Whole CD display Figure 1 TRACK MIN SEC Wi Wid Wa Wiel Wiel Wiel aN ANT AN ANT ANT AN p gt SHUFFLE PROGRAM REPEAT 1A B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 Disc drawer The OPEN CLOSE button controls the drawer It will accept either normal 120mm CDs or small 80mm CDs 4 Infra red receiver The infra red IR remote control receiver is mounted behind the window just to the right of the display It must not be obscured when the CD player is to be operated using the remote control handset Where possible it is best to arrange that the IR receiver is in line of sight of the remote handset When components are connected via the My Link bus only one needs to receive IR command signals in order to control any of the linked units 5 OPEN CLOSE Press this button to open or close the disc drawer The drawer may also be closed by pushing the drawer front gently When the drawer is open the display read OPEN When the drawer is closed with no disc in the player the display will rea
15. on or off when the amplifier is switched on or off The Smart My Link input output can be coupled to other Myryad products that can then be remote controlled via the Z112 s infra red receiver or vice versa The Z112 can be controlled from a remote room via its Smart My Link input When linked via the Smart My Link to a compatible Myryad integrated amplifier or preamplifier a number of extra features become available which make the system as a whole easier and quicker to operate INSTALLATION AND SAFETY This CD player generates very little heat but still requires some ventilation Do not place it on a rug or other soft surface into which it could sink obstructing the air inlets in its underside Do not allow any obstruction to the ventilation slots in the rear panel The CD player should not be installed in a built in situation such as a bookcase or rack unless proper ventilation is provided CAUTION THIS APPARATUS MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING OBJECTS FILLED WITH LIQUIDS SUCH AS VASES MUST NOT BE PLACED ON THE APPARATUS THE REAR PANEL POWER SWITCH DISCONNECTS MAINS LIVE ONLY THE POWER CORD MUST BE DISCONNECTED FROM THE REAR OF THE APPARATUS OR THE WALL SOCKET TO PROVIDE TOTAL ISOLATION ONE OR OTHER OF THESE CONNECTIONS MUST BE READILY ACCESSIBLE WHEN THE APPARATUS IS IN USE Do not remove the cover or attempt to modify or repair the CD player yourself Refer all servicing to a
16. qualified technician The CD laser radiation is Infra Red so you cannot see it If the cover is removed for any reason you MUST pay attention to the following warning CAUTION INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS ATTENTION RADIATION INVISIBLE DU LASER QUAND OUVERT NE PAS REGARDER FIXEMENT LE RAYON OU DIRECTEMENT AVEC DES INSTRUMENTS D OPTIQUE WARNUNG UNSICHTBARE LASERSTRAHLEN IN GEOFFNETEM ZUSTAND VORHANDEN NICHT IN DEN STRAHL BLICKEN BZW DIREKT MIT OPTIKINSTRUMENTEN ANSEHEN ADVARSEL USYNLIG LASERSTRALING VED ABNING SE IKKE IND I STRALEN HELLER IKKE OPTISKE INSTRUMENTER ADVARSEL USYNLIG LASERSTRALING NAR DEKSEL APNES STIRR IKKE INN STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER VARNING OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD STIRRA EJ IN STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT VAROI AVATAESSA OLET ALTTIINA NAKYMATONTA LASERSATEILYLLE ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI This product complies with DHHS 21 CFR Chapter 1 Subchapter J ACCESSORIES Your Z112 is supplied complete with the following accessories e Separate mains power cord to suit country of sale e My Link interconnect 0 5m RCA RCA e Remote control handset e Two AAA batteries for handset not in some countries e MSR2 System Remote Control Owner s Manual SETTING UP YOUR CD PLAYER
17. quality When other Myryad products equipped with Smart My Link e g Z Series or MX Series are connected via the My Link many more powerful system features are available see page 6 5 Line outputs These outputs are suited to the CD or other Line inputs e g AUX or TUNER of any integrated amplifier or pre amplifier Never connect to the amplifiers PHONO inputs OPERATING YOUR CD PLAYER STANDBY OPEN CLOSE PLAY PAUSE STOP 4 SKIP gt T i y C O Q gt FRONT PANEL CONTROLS 1 STANDBY When the CD player is plugged into a live wall socket and the POWER switch is turned ON it will power up in standby mode and the LED Light Emitting Diode by the STANDBY button will glow red In this mode the internal circuitry of the Z112 is powered up but disabled so that it consumes very little power and its audio output is muted by a relay When the STANDBY button is pressed the Z112 s circuitry will be activated and after a few seconds delay the audio outputs will be enabled During this delay period the STANDBY LED in the display will flash blue When the outputs are un muted it will glow blue continuously The blue coloured display will illuminate briefly showing READ followed by NO DISC When the STANDBY button is pressed again the CD player will be returned to standby mode the LED in the display will glow red aga
18. re will be no sound from the loudspeakers It is not possible to SCAN back before the beginning of track 1 or SCAN forward after the end of the last track The SCAN function does not operate in PAUSE mode REMOTE CONTROL HANDSET OPERATION The MSR2 handset supplied with the Z112 has been ergonomically designed to be easy and comfortable to use It will also control Myryad s Integrated Amplifiers Preamplifiers Tuners and DVD Players See the separate MSR2 System Remote User Manual for details of its use with these products Important In order to use the MSR2 handset to control your Z112 you must first press the CD input select button in the middle of the handset to switch it to CD Amplifier mode The handset will remain in this mode until either the DVD or TUN key is pressed to change to DVD Amp or Tuner Amp mode respectively The functions available in CD mode are described as follows Stop M and Open Close A These two keys operate exactly as the front panel buttons with the same names Play gt and Pause Hh The handset has separate keys for PLAY and PAUSE Pressing PLAY from STOP mode will cause the disc to start playing Subsequent pressing of PLAY during PLAY mode will have no effect If PAUSE is pressed during PLAY mode then the player goes into PAUSE mode Press PLAY to return to PLAY mode Skip lt gt The remote control SKIP lt gt keys carry out exactly th
19. the number of the current track and all the other tracks that have not yet been played up to a maximum of 15 It can be particularly useful when programming when it indicates only the numbers of the tracks already programmed A second press of the DIM key will switch the player into Display Off mode and turn the display off A third press will turn the display on again When the display is switched off operation of any of the player s controls on the front panel or remote control will cause the display to switch on for about 2 seconds before it switches off again If there is no disc playing i e disc in STOP or PAUSE mode or no disc the second press of the DIM key will not blank the display but it will still switch the player into Display Off mode indicated briefly by OFF in the display In this mode when a disc is played the display will switch off after about 2 seconds The Display Off mode can be cancelled at any time by pressing the DIM key again If in STOP or PAUSE mode display will then briefly read ON to indicate the return to normal operation PROGRAM An individual compilation of tracks may be played by using the PROGRAM function Up to 16 tracks can be included in a program in any order including repeats of the same track if desired It is recommended that the track calendar be switched on during programming to make the operation easier to follow The procedure for storing a program is as

Untitled

Contents

Download Pdf Manuals

Related Search

Related Contents