User Manual - Oregon Scientific
Contents
1. This producttracks barometric pressure changes over the past 24 hours to provide the weather forecast 11 and a trend line showing the direction of barometric change EN EN BAROMETRIC TREND The barometric trend arrow for the last 30 minutes is always displayed Description Pressure change mb hPa 1 hr 6 hrs 1 3 10 VIEW THE LAST 24 HOURS Press SELECT times until the Barometer Area flashes Then press UP or DOWN to view the last 24 hours history SET UNIT AND ALTITUDE Youcansetthe unit of measurement mb hPa or inHg and altitude Setting the altitude allows the product to take more accurate barometric measurements 1 Press SELECT 2 times until the Barometer Area flashes 2 Press and hold SELECT for 2 seconds 3 Select altitude 100 meters to 2500 meters in increments of 10 and the unit of measurement mb hPa or inHg and press UP or DOWN to change the setting Press SELECT to confirm WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30 to 50 km 19 31 mile radius with 70 to 75 percent accuracy The weather forecast is always displayed oud Cloudy Rainy R Clear Cloud Cloudy ainy BACKLIGHT Press SNOOZE LIGHT to illuminate the backlight for 5 seconds 11 PROJECTOR This product has a built in projector for viewing time and alarm status at night NOTE The maximum projection range is 2 meters 6 feet The image ge2. OTARCK WITH OREGON SCIENTIFIC Radio Controlled Clock with Barometer and Projection Model PS S02 PS S02U User Manual EN TABLE OF CONTENTS About this guide 2 Product overview een 3 Getting startet caeci 6 Batere Sesen exire 6 AC power adapter 6 Switch between modes 6 Changes SettiNgS o ouest px baa Roe NO GNU UE 6 amp 7 sonet obtu teeth 8 Calendar ici docete 9 Barometer etus e EE eee 9 Weather forecast eee 11 Backlight 11 11 Reset rac Meet c 12 Safety and MEN M 12 Erie Ome 12 Troubleshooting isseire cray 13 Specifications erao esed eie Tea anka KERESERE 14 Additional resources eeeeeeeeeeeeee 16 EN EN Congratulations on your selection of the Philippe Starck with Oregon Scientific Radio Controlled Clock with Barometer and Projection PS S02 PS SO2U This powerful device bundles time keeping alarm barometric trend weather forecast and projector features into a single tool you can use from the convenience of your home Keep this manual handy as you use your new product It contains practical step by step instructions as well as technical specifications and warnings you sh
3. T to switch to the Clock Mode The time will flash 2 Press and hold SELECT for 2 seconds to enter the setting mode 3 Select the 12 24 hour format hour and minute Press UP or DOWN to change the setting Press SELECT to confirm ALARM When activated the Alarm starts quietly then gradually becomes louder It shuts off at two minutes The LCD display lights up for the first 8 seconds SET ALARM 1 Press SELECT several times until the Alarm area flashes 2 Press and hold SELECT for 2 seconds to enter the setting mode 3 Select the hour and minute Press UP or DOWN to change the setting Press SELECT to confirm 4 Press SELECT again when you are finished SNOOZE Press the SNOOZE LIGHT button the top of the unit to temporarily disable the alarm for 8 minutes The alarm icon will blink while Snooze is activated TO TURN THE ALARM OFF OR ON Press any button to stop the alarm To turn the alarm off completely deactivate it for the next day press ALARM SET DATE Clock auto synchronization must be deactivated before you manually set the date 7 1 Press SELECT several times until the calendar area flashes 2 Press and hold SELECT for 2 seconds to enter the calendar setting mode 3 Select the year month date and language Press UP or DOWN to change the setting Press SELECT to confirm NOTE The language options are E English F French D German 1 Italian and S Spanish
4. ology equipment Article 3 1 a of the R amp TTE directive applied standard s EN 60950 1997 17 Additional information The product is therefore conform with the Low Voltage Directive 73 23 EC the EMC Directive 89 336 EC and R amp TTE Directive 1999 5 EC appendix 11 and carries the respective CE marking VS Villingen Germany August 2001 Gerhard Preis EC representative of manufacturer RTTE Compliant Countries All EU countries Switzerland And Norway 2003 Oregon Scientific All rights reserved EN
5. ould know In this box you will find Main unit Batteries AC power adapter PRODUCT OVERVIEW DESCRIPTIONS TOP AND BOTTOM VIEWS 1 Snooze Light button gt 8 11 12 2 Projection lens gt 11 3 Reset button gt 6 12 4 DC power input jack gt 6 1 5 Battery compartment 6 2 TERIS Er DM 3 L 4 5 EN N3 DESCRIPTIONS LCD DISPLAY Low battery icon 6 Clock 7 Weather forecast gt 11 Calendar 9 Radio signal icon gt 7 Barometer gt 9 Alarm gt 8 H a a EBENE 000 BACK VIEW BUTTON DESCRIPTIONS Up increase setting activate auto synch gt 7 2 Down decrease setting deactivate auto synch gt 7 3 Select switch modes change settings gt 6 Focus focus projector gt 12 5 Alarm activate deactivate alarm gt 8 gt EN GETTING STARTED BATTERIES Batteries are supplied with this product Replace them whenever the low battery signal displays Remove the compartment lid on the bottom of the unit Be sure to match the correct polarity as shown in the battery compartment Before you close the lid press the RESET button with the point of a blunt object such as a ball point pen NOTE Do not use rechargeable batteries AC POWER ADAPTER An AC power ada
6. pter is supplied for use with the main unit You must connect the power adapter if you wish to use the continuous projection feature The jack is located in the battery compartment NOTE If the AC power becomes unavailable the unit will automatically switch to battery power SWITCH BETWEEN MODES Press SELECT The selected mode will flash The display will stop flashing if no key is pressed within 5 seconds CHANGE SETTINGS Press and hold SELECT for 2 seconds Then press UP or DOWN to change each setting Press SELECT to switch between options CLOCK This product can automatically synchronize the date and time with official time keeping organizations in Frankfurt Germany PS S02 or Rugby England 020 When the unit is within 1500 km 932 miles of a RF signal the reception icon will blink RECEPTION Reception takes 2 10 minutes to complete complete the icon will stop blinking Once Strong signal Weak signal No signal A 1 S N NOTE For best results place the unit away from metal or electrical objects and near a window with a clear view to the sky TO DISABLE OR ENABLE AUTO SYNCHRONIZATION In Clock mode press DOWN for 2 seconds to disable the auto synchronization The unit will not respond to radio signals until you reactivate the synchronization To enable auto reception press UP for 2 seconds EN EN SET OR CHANGE THE CLOCK 1 Press SELEC
7. r humidity Do not tamper with the internal components Do not mix new and old batteries or batteries of different types Donotuserechargeable batteries with this product Remove the batteries if storing this product for a long period of time Do not scratch the LCD display Do not make any changes or modifications to this product Unauthorized changes may void your right to use the product The content of this user guide is subject to change without notice Images not drawn to scale 13 TROUBLESHOOTING Check here before contacting our customer service department Problem Symptom Remedy Calendar Strange date Change language month gt 9 Clock Cannot 1 Remove batteries auto 2 Press RESET All synchronize memory items will EN EN Problem Symptom return to default Problem Symptom Remedy Projector Plug in AC power A adapter 6 12 Replace batteries up projection Strange Set altitude unit reading gt 10 Place clock near window away from electrical devices and wait 10 20 minutes If it still fails you may be too far from Dimensions a signal LxWxH 75 x 36 x 78 3 mm 1 42x 3 08 in Disable auto Weight 212 grams with battery synchronization gt 7 14 Barometer Unit Range Resolution Altitude Display Memory Trend mb hPa or inHg 500 to 1050 mb hPa 14 77 to 31 01 inHg 1 mb 0 03 inHg 100 to 2500 me
8. ters 328 to 8202 feet Rainy cloudy partly cloudy sunny 24 hour 1mb change in 1 hour or 3mb change in 6 hours Radio controlled clock Synchronization Clock display Hour format Auto or disabled HH MM SS 12hr AM PM MSF format 24hr DCF format 15 Calendar Alarm Snooze Projector Display Rotation Focusing Projection Power DD MMM weekday selection in 5 languages E D F I S 2 minute crescendo 8 minutes Current time alarm status image flip Manual 5 second or continuous 3 x UM 4 AAA 1 5V alkaline batteries AC DC 6V power adapter for normal operation and continuous projection EN EN Visit our website www oregonscientific com to learn more about your new product and other Oregon Scientific products such as digital cameras hand held organizers health and fitness gear and weather stations The website also includes contact information for our customer service department in case you need to reach us 16 EC DECLARATION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R amp TTE 1999 5 EC Directives if used for its intended use and that the following standard s has have been applied Efficient use of radio frequency spectrum Article 3 2 of the R amp TTE Directive applied standard s N A Electromagnetic compatibility Article 3 1 b of the R amp TTE Directive applied standard s ETS 300 683 1997 Safety of information techn
9. ts larger the farther you display it PROJECT TIME ALARM STATUS In a darkened room press SNOOZE LIGHT to display the time and alarm status for 5 seconds FLIP IMAGE Press SNOOZE LIGHT again while the projector is on EN EN FOCUS IMAGE The FOCUS switch is located on the back of the unit Rotate to adjust CONTINUOUS PROJECTION The AC power adapter must be plugged in to use this feature gt 6 1 Press and hold SNOOZE LIGHT for 2 seconds when the projection is on When activated the time and alarm status will project continuously 2 Press and hold SNOOZE LIGHT for 2 seconds again to deactivate RESET SYSTEM The RESET button is located in the battery compartment Press it with the tip of a blunt object such as a ball point 12 pen whenever you change the batteries or whenever performance is not behaving as expected e g unable to establish radio frequency link with automatic clock etc This will return all settings to default value barometric pressure history alarm setting etc SAFETY AND CARE Wash the unit witha slightly damp cloth and mild detergent Avoid dropping the unit or placing it in a high traffic location This product is designed to give you years of service if handled properly Observe the following guidelines Never immerse the unit in water This can cause electrical shock and damage the unit Do not subject the main unit to extreme force shock or fluctuations in temperature o
Download Pdf Manuals
Related Search