a complete Portable System Guide & Data Sheet ..........more..
Contents
1. battery should be changed at approximately mid day To change the batteries open the battery compartment Receivers H 3 Battery Compartment Headphone connection Volume UP VOL Power PWR CH voL 4 Volume Down Battery Level Indicator Currently tuned Channel Volume Level Frequency 1 Plug the headphones into the receiver The receiver should then be turned on automatically 2 If the receiver fails to turn on upon inserting the headphone jack in the receiver press and hold the POWER button for at least 2 seconds WARNING If no signal is received by the receiver for 3 minutes it will automatically shut off 3 Using the CH and CH buttons SELECT the channel that matches the transmitter channel as indicated in page 1 4 Use the VOL and VOL buttons to adjust the volume level as desired 5 When the visual BATTERY LEVEL indicator shows that the battery is fully charged 2 bars showing the estimated usage time will be approximately 75 hours of continuous reception Only replace the batteries if NO bars are showing on the battery level indicator2. PORTABLE RADIO FREQUENCY INTERPRETATION SYSTEM REX 7 USER S MANUAL You should have N Transmitter LED MUTE TALK indicator Switch Headset connection LED indicator a LCD Display UP Down Battery Compartment Illuminated dots when Currently tuned microphone is on disappears Channel when on MUTE Battery Level Icon Indicator 1 Connect the headset microphone to the portable transmitter 2 Turn the transmitter on by pressing the power button 3 Using the UP or DOWN button select the transmitter CHANNEL that offers the best audio signal with the lowest level of interference noise 4 Once you have chosen a transmitter channel match the receiver channel as indicated in the table below Transmitter Receive channel Channel 5 LOCK OR UNLOCK the selected channel To lock the channel selection on the transmitter press and hold either the UP or DOWN button for 2 seconds When locked the small padlock icon appears on the display Press and hold again to unlock 6 There is a red MUTE TALK switch on the top of the unit The MUTE position will turn off your microphone The LED on the top of the unit will flash rapidly Slide the switch to the TALK position to turn the microphone on 7 When the visual BATTERY LEVEL indicator shows that the battery is fully charged the estimated usage will be approximately 6 hours of continuous transmission If the transmitter is needed for a full day s use the
Download Pdf Manuals
Related Search