Home

MALLOCA

1. Light On Off Button Blower On Off and Low Speed Button Switches the extractor motor on and off at low speed Used to pro vide a continuous and silent air change in the presence of light cooking vapors Blower On Off and Medium Speed Button Switches the extractor motor on and off at medium speed Suitable for most operating conditions given the optimum treated air flox noise level ratio Blower On Off and High Speed Button Switches the extractor motor on and off at high speed Used for eliminating the highest cooking vapors emission including long periods HO S D Blower Off with Delay Timer Button Switches the extractor motor off at the selected speed with 3 15 minutes 3 minutes increment delay to off the blower automatically Press the button for the sixth time to cancel the timer function Q Technical Information Dimensions Width 7 00 mm Depth 280mm Height 180mm
2. MALLOCA H205 7 G BUILT IN HOOD USER S MANUAL For original parts amp reliable service BACHHOP KITCHENWARE COMPANY LIMTED INSTRUCTIONS FOR INSTALLATION 279 Nguyen Van Troi Street Phu Nhuan Dist AND USE Ho Chi Minh City Viet Nam Tel 84 8 8625726 Fax 84 8 8625727 Table of Contents From the Manufacturer Specifications SAFETY Read this first Description of Parts Instruction for use Technical Information Installation Cleaning amp Maintenance Troubleshooting NO oO KR WO W op 9 10 11 Troubleshooting Symptoms Possible Cause Does not function No electrical supply Aluminum filters grease clogged Poor airflow Charcoal grease filters clogged Motor running but no Butterfly valve jammed airflow High temperature safety de vice activated Motor cuts after a few minutes The hood is installed too near the cooking stove Charcoal filters not installed Strong cooking smell Aluminum grease filter saturated Oil dripping onto stove Aluminum grease filter saturated Whirring sound Foreign object in contact with fan blade Action Check that the plug is con nected Check that the main switch is turned on Clean the filters and replace when it is dry Replace charcoal filters with new sets Contact technician The kitchen is not sufficiently ventilated The hood must be at least 65cm from stove In re circulating mode char coal filters mu
3. etallic surfaces such as knives scissors etc Installation To fix the extractor to the kitchen unit The lower part of the extractor must be located at a minimum height of 70cm above the hob If the instructions of a gas cooker indicate a greater distance these must be observed When the extractor is working at the same time as other non electrical cook ing equipment the outlet air pressure must not exceed 4 Pa To achieve optimum performance the length of the outlet hose should not ex ceed 4 meters or include more than two 90 angles elbows Although venting to the outside is recommended activated carbon filters may be used which allow the gas to be returned to the kitchen through the outlet pipe Description of Parts A Touch control B Extractable group that allows a greater gas capture area C Filters located over cooking area easily withdrawn for cleaning D Lighting by means of lamps Ja F Possibility of incorporating activated charcoal filter G H Anti return tabs to be located in the outlet mouth locating ends in the holes provided Instructions for use To achieve better extraction we recommend switching on the extractor a few minutes before starting to cook 3 5 minutes so that the air flow is continu ous and stable when extracting fumes Likewise keep the extractor switched on for a few minutes when cooking is complete to allow all fumes and odors to be expelled
4. or similarly qualified persons in order to avoid a hazard There is a fire risk if cleaning is not carried out in according with the instructions The hood use four hob element at most Cleaning amp Maintenance Before carrying out any cleaning or maintenance activities ensure that the appliances is disconnected from the mains To carry out cleaning and maintenance follow the safety Instructions Filter Cleaning To withdraw the filters from their locations release the anchoring points Clean the filter either putting in the dishwasher refer to notes or leaving it standing in hot water to simplify the removal of grease or if wished by means of spe cial sprays protecting the non metallic parts Once clean leave it to dry Notes cleaning in the dishwasher with aggressive detergents may blacken the surface of metallic parts without this affecting its gas retaining properties The filter must be cleaned at least once a month depending on how often the appliances is used It must be remembered that grease is deposited in the extractor when cooking whether it is switched on or not Cleaning the appliances body The use of 40 C approx soapy water is recommended A cloth moistened in this water is used for cleaning the extractor paying special attention to the grids Afterwards dry it using a lint free cloth Note Never use metallic scouring pads or abrasive products that could dam age the surface Do not use scrapers with m
5. r manual thoroughly before attempting to use this appliance e Installation and repair should be attempted only by qualified technical personnel e It is dangerous to modify any part of this appliance e The manufacturer declines all responsibility in case of failure to adopt proper safety meas ures e Ensure the location in which this appliance is installed has good permanent ventilation e The distance between the bench top to the lower part of the hood must not be at less than 70 cm or higher than 75 cm e Use an electrical connector with earth that is correct for your location e Check that the voltage in your area is correct before plugging in e Multiple plugs and extension cables must not be used Overload is dangerous and may cause a fire Ensure that the power supply chord is free from any heat source or sharp objects e The appliance should be switched off and the electrical supply disconnected before any cleaning or maintenance work can be carried out This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance e If the supply cord is damaged it must be replaced by the manufacturer its service agent
6. st be installed Wash the aluminum grease filters Wash the aluminum grease filters Contact technician 11 Cleaning amp Maintenance continued Activated charcoal filter To install the charcoal filter the motor anchorage is made to coincide with the anchor points of the activated charcoal filter and turn in clockwise The carbon filter lasts from three to six months depending on the particular conditions of use The activated carbon filter can neither be exhausted it must be changed Changing Bulbs Remove the filter support to access the bulbs Take care to disconnect the mains beforehand and that the bulbs to be re places are not hot The maximum bulbs power is 3W 10 From the Manufacturer e This appliance and it s packaging are produced by processes that mini mize waste and respect the environment e Please help us to continue the protection of the environment by dispos ing of the packaging in a correct manner e Safety e Please do not allow young children to play with the plastic bag packag ing e Before disposing of any old appliances be sure to cut off the power chord so that others will not be endangered by a defective electric appli ance Input 220 240V 50Hz Absorption 125W Lamps 2x 1 5W LED External Dimensions e 70cm version 00x280x180mm SAFETY Read this First e Do not connect the appliance if there are obvious signs of transportation damage e Read this use

MALLOCA

Contents

Download Pdf Manuals

Related Search

Related Contents