Home

USER MANUAL

1. USER MANUAL 4 3 inches Facial Fingerprint Recognition Serial Version V3 0 2 Date February 2012 Applicable Model iFace201 iFace202 iFace301 iFace302 iFace401 iFace402 About This Manual This manual mainly introduced the user interface and menu operations of the 4 3 inches Facial amp Fingerprint Recognition series products For the installation of the FFR terminal see Facial amp Fingerprint Recognition Series Product Installation Manual Not all the devices have the function with The real product prevails The photograph in this manual may be different from that of the real product The real product prevails Important Claim Firstly thank you for purchasing this facial and fingerprint hybrid terminal before use please read this manual carefully to avoid the unnecessary damage The company reminds you that the proper user will improve the use affect and authentication speed No written consent by our company any unit or individual isn t allowed to excerpt copy the content of this manual in part or in full also spread in any form The product described in the manual maybe includes the software which copyrights are shared by the licensors including our company Except for the permission of the relevant holder any person can t copy distribute revise modify extract decompile disassemble decrypt reverse engineering leasing transfer sub license the software other acts of copyright infringement
2. Only some machines have external ringing options 4 3 Inches Facial amp Fingerprint Recognition Serial 49 o Edit and delete a bell Press a bell in the list on the bell setting interface to display the Edit interface with the similar operation as Add a bell Hell lime Ring Tone Flepeal lale Bell Typ Press Delete on the Edit interface and the system displays a prompt window as shown in the figure on the right In the prompt window press YES to delete the current bell and NO to cancel the deletion Riell Delete f Save Bell Time 00 00 I gt Sunday Fung Tone b bell0l wav Danast 50 4 3 Inches Facial amp Fingerprint Recognition Serial 12 Access Control Setting Through the Access menu you can set the parameters of the electronic locks and related access control devices x sor Sensor Delays User Mgt System Data Mgt Dn Upload Door Sensor Mode Door Sensor Aarm Delays ET Keyboard Auto Test Calibration Lock s Fingerprint scanner controls the time to open electronic lock Functioning value for 1 10 Door Sensor Delay s Some segment time which begin after open door just begin alarm The functioning value is 1 99 Door Sensor Mode There are three option that is none NONE normal open NO normal close NC The none means the door Sensor doesn t apply Normal Open is defined that Thee door can be set to a Passage Mode in the normal condition Normal Close means
3. 24 Br IG Ch T E E oO O O 24 SA lOu y DY User DA Ras 24 BAD QUTI TOW NIME aan E T OOT 25 4 Communication related Settings miii 26 41 NetWork Setin Sensan AA 26 42 Serial POTES CUNA AAA AAA 26 A A rth aa E atl Greta naa aeedraneat 27 TANWICO NA UM nin 29 4 4 1 Wiegand 26 bits Output DescriptiON es esessssssssssscscsesssssessesescssssescssscsesscsesessssssesesescsesseseaeaeacsesseseseacesssess 29 4 4 2 Wiegand 34 bits Output Description eesesssecsssesesssscsescssssssesesessssssesesessssesesesesessesescacsescsessesesesesesseseacacesess 30 A AS CUSLOMMIZEC FONN dt tanta thie aot dd idee daa areas dad 32 5 SYSTEM CONFIQUTALION root donados ANNAN ARO EE A E EARE ANITA 35 A E ees 35 Bie DINU A 35 AO 36 DT ae AS RR 37 O SOLUS capes paseo eer E E SOOO Grn S I IA NAI A AE 38 A earn o y A 38 E 1 PPP LN 40 Bl QUE RECO Aa 40 SERLO Soo AAA O E ORC A 41 7 USB DISK Manage Me EG segs scsciscensiescdssessceseesesedncesscesaenconasesscdcenseacnceesaneccasensancasiuscedgunsaescoawedscestasenscensaencassess 44 B Keyboard DETIMICIONS sisi cocessicccassctusuteasncsesssckacvessesceesstenunvaeecevsncoestaeseesecessactbeneecessessadecehessessssuscusuanseestensooens 45 DF UO TOS A 47 TO SCrEEN Calibra toscanini 48 SA O 49 LP ACCESS Control Settini PPP UPON Ao U 0O O 51 A AAA OO 52 ei alan Ao oo cea E eee ed ae des aces sea casera ries ese cee eee 52 lI 4 3 Inches Facial amp Fingerprint Recognition Serial 13 2 SEU DayilGOnt Savi
4. 4 3 Inches Facial amp Fingerprint Recognition Serial 23 3 3 Delete a User On the User Info interface you can delete all or partial user information 1 Press Delete to delete a user as shown below 2 On the interface displayed show as below click YES to delete current user or NO to return to previous interface 3 4 Query a User To facilitate administrators to locate a user quickly from a large number of enrolled users the FFR terminal enables user query by his her User ID and Name Location Search 3 4 1 Query by User ID 1 Press Query on the User Management interface to display the User ID query interface as shown in Figure 1 on the right Ianni waan LAE 100014 10005 Linda HEDOEF GH IRF LMA A TOU aR YZ 2 Enter the user ID on the displayed interface and click OK as shown in Figure 2 on the right to locate the cursor to the desired user as shown in Figure 3 on the right 24 4 3 Inches Facial amp Fingerprint Recognition Serial User Management 10001 Dave 10002 Lucy 10003 ken 10004 Sala 10005 Linda ABC EFGHIJELMNOPORETUYV WHY 3 4 2 Query by Name On the User Mgt interface enter the user name through the Character Selection Bar to locate the cursor to the desired user as shown in the following figure 10004 10003 10002 TOUS Linds TOM Danse ABUCODEFGHI J LWMWNHOPOQOHS TUV We Ye By selecting a character from the Character S
5. bits and also supports the format customization function to meet individualized requirements Failed ID refers to the value output by the system upon verification failure The output format is subject to the setting of Wiegand Format The default value scope of Failed ID is 0 65535 Site Code The site code is used for customized Wiegand format The site code is similar to the device ID but the site code is customizable and can be duplicated among different devices The default value scope of the site code is 0 255 Pulse Width refers to the width of the Wiegand pulse in microseconds The default value scope of the pulse width is 1 1000 Pulse Interval refers to the interval of the Wiegand pulse in microseconds The default value scope of the pulse width is 1 10000 Output refers to the contents output upon successful verification You can select the User ID or Card Number as the output 4 4 1 Wiegand 26 bits Output Description The system has a built in Wiegand 26 bits format Press Wiegand Format and select Standard Wiegand 26 bits The composition of the Wiegand 26 bits format contains 2 parity bits and 24 bits for output contents User ID or Card Number The binary code of 24 bits represent up to 16 777 216 0 16 777 215 different values 1 2 25 26 Even parity bit User ID Card Number Odd parity bit Definition of Fields 4 3 Inches Facial amp Fingerprint Recognition Serial
6. but the limitations applied to the law is excluded 1 Due to the constant renewal of products the company cannot undertake the actual product in consistence with the information in the document also any dispute caused i by the difference between the actual technical parameters and the information in this document Please forgive any change without notice Contents A i ves aaducedicesisscvsscedseccedssacdeodscdecsasssesvascecaoesseeebasasodedcessane l Instruction Tor USE aeaea aaa O 1 LA The Distance Facial Expression ANA Stand POSE a 1 Za OMG A E eats RRR hash tte 1 Tee EMCI Place mentalidad ibid 2 TASC O ToU SMN aaa 2 ka VOC OW CTU ONS iii dida 3 16 Appearahce OF tme FER Termina 4 EA OO 4 ES VGRINIGATION Mod SS a 5 1 85 US OUT E Vertical A 5 19 2 Facial Ven CON daa 5 8 3 Password Verification lis 8 CA A O rt artos 9 AR O 11 E E PAP Z qP O 13 Sl AQAINO AUS do donan 13 Sl ENT AN SCI ND RT AA AAA AAA AE EII 14 3 LEZENT a NE AT E as 16 3 ES ENTrollinga Fingerprint ensar a a aaa aN 17 DAA EM FOB PASS WV OMCs oraaa a a dadas 18 3 SENTONO A Fate a N 19 SO ENCINO A GOUD NO a T O cane cases sacs once ease E E nae 19 3 1 7 Enrolling an ID Card e e TTT 21 3 1 8 Enrolling an Mifare Card lil aiii 22 OMISIONES ais 22 TAO pico ll PN OUO AA o 0 E REAREN 22 SLEI AN SOT Geen RR 23 4 3 Inches Facial amp Fingerprint Recognition Serial 3 DY aera UA ASTI A eae MEO A Rett Be ae NER E ERT ae aT eae
7. even parity check Bits 2 to 5 are manufacturer code bits 6 to 17 are the site code bits 18 to 36 are the card number 4 3 Inches Facial amp Fingerprint Recognition Serial 33 Wiegand37 Data bits pmmmffffffffffssssssccccccccccccccccp Parity bits eeeeeeeeeeeeeeeeeeoo00000000000000000 Note Wiegand37 consists of 37 bits The first bit is the even parity bit of bits 2 to 18 the 34 bit is the odd parity bit of bits 19 to 36 the second to the fourth bits are the manufacturer code the 5 to the 14 bits are facilitate code the 15 to the 20 bits are the site code the 21 to the 36 bits are the card number Wiegand50 Data bits pssssssssssssssssccccccccccccccccccccccccccccccccp Parity bits eeeeeeeeeeeeeeeeeeeeeeeeeoo00000000000000000000000 Note Wiegand50 consists of 50 bits The first bit is the even parity bit of bits 2 to 25 the 50 bit is the odd parity bit of bits 26 to 49 the second to the 16 bits are the site code the 17 to the 49 bits are the card number 34 4 3 Inches Facial amp Fingerprint Recognition Serial 5 System Configuration Through the System menu you can set system related parameters including the General parameter Display parameter Fingerprint parameter Face and Log Settings parameter and so on to enable the terminal to meet user requirements to the greatest extent in terms of functions and display T E O Data Mat DnfUpload Keyboard Auto Test Calibratian Settings Save Date Time 2011 1
8. personnel from our company 5 5 Log Settings Menu General Lan Aer Display Fingerprint Workcode Mode arce Card Only Face Interval Log Alert When the available space is insufficient to store the specified number of attendance records the FFR terminal will automatically generate an alarm Value scope 1 99 Dup Punch Period m If a user s attendance record already exists and the user punches in again within the specified period unit minute his her second attendance record will not be stored Value scope 1 60 minutes Workcode Mode This parameter is used to select the work code input mode among Mode 1 Mode 2 and None during attendance verification If you select Mode 1 the attendance verification starts after you input the work code on the initial interface if you select Mode 2 the attendance verification starts before you input the work code on the initial interface if you select None you do not need to input the work code during attendance verification on the initial interface For the input of the work code see 6 2 Work Code Card Only If this parameter is set to YES you pass the verification only after card verification If this parameter is set to NO you need to verify your face or fingerprint after card verification Face detect interval s According to the need to set the same person face detect interval time The default is 0 namely without interval 1 G Verify T
9. return to the initial interface For details see 10 Screen Calibration in this manual Smear or dust on the touch screen may affect the performance of the touch screen Therefore try to keep the screen clean and dust free 1 5 Touch Operations O Enter numbers Press the User ID key The system automatically displays the number input interface After entering the user ID press OK to save and return to the previous interface O Enter Text Press the Name key The system automatically displays the text input interface After entering the user name press X to save and return to the previous interface Modify parameters Press the default value of a parameter and the system automatically switches to another value of this parameter Menu Communication TCPAP AS232 992 WIFI Baud Hate WIFI Daud Rate is 115200 Wiegand Output Wiegand Output 3 4 3 Inches Facial amp Fingerprint Recognition Serial 1 6 Appearance of the FFR Terminal Indicator Touch screen Push buttons Finger Sensor ID card swipe area Camera be 1 7 Main Interface 1 Menu 2 Time 3 Date MENU B 11 11 14 Monday 11716 l 4 1 1 1 N Function Key 5 Facial he 6 Group No Jj VEN 7 Attendance Status L RE checkin Check Out Break Out Break In OT In OT Out 8 Screen Shortcut Keys 9 Keyboard Shortcut Keys 1 Menu You can enter the main menu by touching this
10. that the door is close in the normal work condition Door Sensor Alarm Delay s Detection to the abnormal door sensor state the door sensor will generate an alarm signal after a period of time this time is door sensor alarm delay The functioning value is 1 99 note Only the user has enable access function you can make access control setting otherwise can t For detail please see 5 2 Display 4 3 Inches Facial 8 Fingerprint Recognition Serial 51 13 Date Time Setting 13 1 Set Date Time The date and time of the FFR terminal must be set accurately to ensure the accuracy of attendance time 1 Press Menu on the initial interface to display the main menu interface 2 Press Time Date on the main menu interface to display the time setting interface 3 Select the desired date and time by pressing the numbers on the screen or enter the related values into the date and time entry boxes through the keyboard 4 Press Save to save current information and return to the previous interface Press Cancel to return to the previous interface without saving current information 52 4 3 Inches Facial amp Fingerprint Recognition Serial 13 2 Set Daylight Saving Time DLST The Daylight Saving Time DLST is a widely used system of adjusting the official local time forward to save energy The uniform time adopted during the implementation of this system is known as the DLST Typically clocks are adjusted forward one hour i
11. 1 14 16 33 Date Format Keyboard Clicks Voice Prompts Volume Lock Power Key Disable Date Time This parameter is used to set the date and time of the FFR terminal Date Format This parameter is used to set the format of the date displayed on the initial interface Keyboard Clicks This parameter is used to set whether to generate beep sound in response to every keyboard touch Select ON to enable the beep sound and select OFF to mute Voice Prompts This parameter is used to set whether to play voice prompts during the operation of the FFR terminal Select ON to enable the voice prompt and select OFF to mute Volume This parameter is used to adjust the volume of voice prompts Lock Power Key This parameter is used to set whether to lock the power key Select ON to disable the power key If you select OFF and press the power key the FFR terminal will be shut down in three seconds 5 2 Display Menu Setilngs Language This parameter is used to display the current language used by the FFR terminal For 4 3 Inches Facial 8 Fingerprint Recognition Serial 35 multilingual capable FFR terminals you can switch between different languages through this parameter 24 Hour Time This parameter is used to set the time display mode of the initial interface Select ON to adopt the 24 hour display mode Select OFF to adopt the 12 hour display mode Toolbar This parameter is used to
12. 29 Even parity bit Judged from bit 2 to bit 13 The even parity bit is 1 if the character has an even number of 1 bits otherwise the even parity bit is 1 User ID Card Number User ID Card Number Card Code 0 16777215 bit 2 bit 25 wu eee Bit 2 is the Most Significant Bit MSB Odd parity bit Judged from bit 14 to bit 25 The odd parity bit is 1 if the character has an even number of 1 bits otherwise the odd parity bit is O For example for a user with user ID of 12345 the enrolled card number is 0013378512 and the failed ID is set to 1 1 When the output is set to User ID the Wiegand output is as follows upon successful verification 00000000000110000001110011 Even parity bit User ID Binary code of 12345 Odd parity bit 2 When the output is set to Card Number the Wiegand output is as follows upon successful verification 11100110000100011110100000 Even parity bit User ID Binary code of 0013378512 Odd parity bit 3 The Wiegand output is as follows upon verification failure 00000000000000000000000010 Even parity bit Failed ID Binary code of 1 Odd parity bit Note If the output contents exceed the scope allowed for the Wiegand format the last several bits will be adopted and first several bits are automatically discarded For example the user ID 888 888 888 is 110 100 111 110 110 101 111 000 111 000 in binary format Wiegand26 only supports 24 bits that is it only outputs the last 24 bits an
13. KTeco or a related company All other product and company names mentioned are used for
14. acters of name as shown in Figure 2 on the right Press space or Enter to input the character User Mgt Add User Continue Dave gt A Password 3 After finishing the entry of name press Enter to confirm as shown in figure 3 on the right and then press X to exit keyboard interface and return to the previous interface as show in figure 4 on the right User Mgt Add User Continue Save User Mgt Add User Continue gave Fingerprint Password Fingerprint Passwort ar 58 4 3 Inches Facial amp Fingerprint Recognition Serial Appendix 2 Rules for Uploading Promotional Pictures 1 All pictures must be in JPG format as other formats are not supported 2 The file name of a promotional picture must be ad_0 ad_9 For example ad_1 jpg is a valid file name 3 After a picture is uploaded to the FFR terminal its name does not change To replace this picture you need to upload a new picture with the same file name to overwrite it 4 The size of each picture cannot exceed 64K otherwise the upload will be unsuccessful 5 The recommended resolution of the picture is 320 x 240 Pictures with resolution higher or lower than 320 x 240 are not recommended 6 Amaximum of 10 promotion pictures can be uploaded 4 3 Inches Facial amp Fingerprint Recognition Serial 59 Appendix 3 Introduction to Wiegand Wiegand 26 is an access control standard protocol established by the Access Control Standard Subcom
15. and delete a work code 1 Press the row of a work code on the WorkCode interface as shown in Figure 1 on the right to display the Edit interface Welidoctor layat 2 To edit this work code enter a new No and label with the same operation steps as described in Add a work code 3 To delete this work code press Delete as shown in Figure 3 on the right 42 4 3 Inches Facial amp Fingerprint Recognition Serial 4 On the displayed prompt interface press lt YES gt to confirm the deletion of this work code and press lt NO gt to cancel the deletion operation as shown in Figure 4 on the right 4 3 Inches Facial amp Fingerprint Recognition Serial 43 7 USB Disk Management Through the Dn Upload menu you can import user information and attendance data stored in a USB disk to related software or other fingerprint recognition equipment DinfUpload a A z r Diwnload Transacti Upload User Le User Mgt Comm System Data Mgt Download User Upload Weer Photo Download user photos Upload Picture Download Transactions Import all the attendance data from the FFR terminal to a USB disk Download User Import all the user information fingerprints and facial images from the FFR terminal to a USB disk Download user photos Import the employees photos from the FFR terminal to a USB disk Upload User Upload the user information fingerprints and facial images stored in a USB disk to t
16. ce to display the bell setting interface as shown in Figure 1 on the right T pa Data Mg Dn Upload Adda bell 1 The displayed bell setting interface lists all the bells Click Add to display the Add interface Ald SAVE ASA 00 00 EE 1 i y 00 00 bell ware _ A A ing Tone ha bell ware iaa bell mr 10 00 00 belli arar Siate b Enable 00 00 bel ware lo Internal nmaa foe was 00 00 EII ras Note You only can add 15 bells 2 On the Add interface set the following parameters Bell Time This parameter is used to set a time point when the FFR terminal automatically plays a bell ring tone every day Ring Tone This parameter is used to set the bell ring tone Repeat This parameter is used to set the alarm times State This parameter is used to set whether to enable the bell Bell Type You can select between internal ringing external ringing or Int amp Ext Bell For internal ringing the ring tone is played by the loudspeaker of the FFR terminal For external ringing the ring tone is played by an external electric bell that is wired with the FFR terminal The alarm sounds of the bell and the access control cannot be concurrently generated by the loudspeaker of the FFR terminal or externally connected relay Therefore when the bell is set to the external ringing mode the access limit alarm will automatically change to the internal ringing mode and vice versa Notice
17. cement For details see 1 3 Finger Placement 3 If the verification is successful an interface as shown in Figure 1 on the right will be displayed 11 11 14 Monday PG Verity Fingerprint Please iry agalnl 4 If the verification is not successful an interface as shown in Figure 2 on the right will be displayed MENU 11 11 14 Monday ANRE User 10 10001 Mame Dare VYenty Fingerprint 13 48 Verliled 1 8 2 Facial Verification o 1 N facial verification The terminal compares current face image collected by the camera with all face data on the terminal 1 To enter the 1 N recognition mode the device automatically distinguishes face and fingerprint verification 2 Compare the facial in a proper way For details see 7 7 The Distance Facial Expression and Stand Pose Comparison of interface display the current image collected by the camera an interface as shown in Figure 1 on the right will be displayed 4 3 Inches Facial amp Fingerprint Recognition Serial 5 gt MENU 11 11 14 Monday User IS 10001 Name Dire i VYerlty 1 H Face 14 07 Verified o 1 1 facial verification The terminal compares current facial collected through the facial collector with that in relation to the user ID entered through keyboard Adopt this mode only when it is difficult to recognize the facial 1 To enter the 1 1 recognition mode you can A Press 1 1 on the screen as shown in Figure 1 on t
18. corresponding operation O set password According to the selected authentication mode and different encrypt types the interface where password is set is also different There are two interfaces WEP and WPA 1 WEP password As shown in Figure 1 on the right Input the password according to the requirement There are four group passwords in WEP Password If the 4 group passwords are set and correct then only the currently selected password is the valid value Esl PAD Index PAD Type Passwordi 2 WPA password As shown in Figure 2 on the right According to the screen prompts 8 64 ASCII characters or 16 hexadecimal numbers After the completion of installation click save button to save and returns to the upper interface Exit WPAPassword Password EEE 2401 ASCH or 1 ODit Hex Point IP Show as in Figure 3 on the right Point the device IP in wireless network It has nothing to do with network option in communication option Exil IP Address Subnet Mask Galewny After IP is specified press Save to save the setting and then return to wireless option interface After setting press Save to return to the upper interface 28 4 3 Inches Facial 8 Fingerprint Recognition Serial 4 4 Wiegand Output Menu Communication Save efine C Failed ID Site Code ea Pulse Width Pulse Interval Output Wiegand Format The system has two built in formats Wiegand 26 bits and Wiegand 34
19. d face recognition modes F6 is defined as a recognition mode switch key by default and cannot be modified Function You can set the functions of different shortcut keys such as Status 1 1 1 G Work code Face G1 to G5 and Undefine 1 1 Set the verification type as 1 1 as shown in Figure 3 on the right Label Include Check In Check Out Break Out Break In OT In OT Out The setting interface is shown in Figure 10n the right 4 3 Inches Facial 8 Fingerprint Recognition Serial 45 When setting the attendance status shortcut keys you can also set the Auto Switch parameter When Auto Switch is enabled the FFR terminal automatically switches the attendance status at the specified time The Auto Switch setting interface is as shown in Figure 2 on the right Keyboard 46 4 3 Inches Facial amp Fingerprint Recognition Serial 9 Auto Test The auto test enables the system to automatically test whether functions of various modules are normal including the screen collector voice facial keyboard and clock tests es GJ Auto Test User Mgt Comm System Data Mgt OnfUpload Fry Screen Test The FFR terminal automatically tests the display effect of the color TFT display by displaying full color pure white and pure black and checks whether the screen displays properly You can continue the test by touching the screen or exit it by pressing Auto Test Voice Test The FFR terminal a
20. d first 6 bits 110 100 are automatically discarded 4 4 2 Wiegand 34 bits Output Description The system has a built in Wiegand 34 bits format Press Wiegand Format and select Standard Wiegand 34 bits The composition of the Wiegand 34 bits format contains 2 parity bits and 32 bits for output contents User ID or Card Number The binary code of 32 bits represent up to 4 294 967 296 0 4 294 967 295 different values 30 4 3 Inches Facial 8 Fingerprint Recognition Serial 1 2 33 34 Even User ID Card Number Odd parity bit parity bit Table 2 Definition of Fields Even parity bit Judged from bit 2 to bit 17 The even parity bit is 1 if the character has an even number of 1 bits otherwise the even parity bit is 1 User ID Card User ID Card Number Card Code 0 4 294 967 295 Number bit 2 bit 33 Bit 2 is the Most Significant Bit MSB Odd parity bit Judged from bit 18 to bit 33 The odd parity bit is 1 if the character has an even number of 1 bits otherwise the odd parity bit is O For example for a user with user ID of 123456789 the enrolled card number is 0013378512 and the failed ID is set to 1 1 When the output is set to User ID the Wiegand output is as follows upon successful verification 0000001110101101111001101000101011 Even parity bit User ID Binary code of 123456789 Odd parity bit 2 When the output is set to Card Number the Wiegand output is as follows
21. d in the FFR terminal in the 1 N verification mode If the similarity between current fingerprint and the fingerprint template enrolled in the FFR terminal is larger than this threshold the matching is successful otherwise the matching is not successful The recommended thresholds are as follows Threshold FRR FAR N a High Low 45 25 Medium Medium 35 15 Low High 25 10 36 4 3 Inches Facial amp Fingerprint Recognition Serial 1 1 Retry Times This parameter is used to set the retry times in the event of failure of 1 1 verification or password verification due to absence of fingerprint enrollment or improper finger placement so as to avoid repetitive operations Algorithm Version This parameter is used to select the fingerprint algorithm version between 9 0 and 10 0 Please select the algorithm version with caution because the fingerprint templates of these two algorithm versions are incompatible Fingerprint Image This parameter is used to set whether to display the fingerprint image on the screen during fingerprint enrollment or comparison It has two values Permanent Display and No Display 5 4 Face Menu Settings Display UN Threshold Exposure 1 1 Threshold This parameter is used to set the threshold of matching between current face and the facial template enrolled in the FFR terminal in the 1 1 verification mode If the similarity between current face and the facial template enrolled in the FFR terminal is larger t
22. display style of the shortcut keys on the initial interface It can be set to Auto Hide and Unhide By selecting Auto Hide you can manually display or hide the toolbar By selecting Unhide you can permanently display the toolbar on the initial interface Picture Delay S This parameter is used to set the picture cycle interval the default value is 0 means not enable this function The value scope 3 999 seconds Sleep Time S This parameter is used to specify a period after which the FFR terminal is put in sleep mode if not operated within this period You can bring up the FFR terminal from sleep by pressing any key Enable access Sets whether to enable access control settings can choose yes or no choice yes is open or closed 5 3 Fingerprint Menu Setlings Display LN Threshold 1 1 Kelry limes Algorithm Version tio Finger WT Log Settings Fingerprint Image BE Always Show 1 1 Threshold This parameter is used to set the threshold of matching between current fingerprint and the fingerprint template enrolled in the FFR terminal in the 1 1 verification mode If the similarity between current fingerprint and the fingerprint template enrolled in the FFR terminal is larger than this threshold the matching is successful otherwise the matching is not successful 1 N Threshold This parameter is used to set the threshold of matching between current fingerprint and the fingerprint template enrolle
23. ditions specified in the product instructions without leakage of noxious and harmful substances The EFUP of this product does not cover the consumable parts that need to be replaced on a regular basis such as batteries and so on The EFUP of batteries is 5 years Names and Concentration of Toxic and Hazardous Substances or Elements Toxic and Hazardous Substances or Elements a se ee oe empresor x oT Oo TO po o mwar x 9 Oo Oe o wma x 9 To TO po o waos x Oo po TOT Oe EsDcomponens ox 9 9 e e e s A pa o po o swe A pa pe po o see o yo po pop o O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ T11363 2006 x Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ T11363 2006 Note 80 of the parts in this product are manufactured with non hazardous environment friendly materials The hazardous substances or elements contained cannot be replaced with environment friendly materials at present due to technical or economical constraints 64 4 3 Inches Facial amp Fingerprint Recognition Serial ZKTeco Europe S R L Av Camino de lo Cortao 10 Nave 1 28703 S S de los Reyes Madrid SPAIN Tel 34 916 532 891 www zkteco eu Copyright 2015 ZKTeco Inc ZKTeco Logo is a registered trademark of Z
24. elect USB Disk Management gt Download gt Download User Photos A folder with the name of photo will be automatically created on the USB disk and all downloaded user photos are stored under this folder 62 4 3 Inches Facial amp Fingerprint Recognition Serial Statement on Human Rights and Privacy Dear Customers Thank you for choosing the hybrid biometric products designed and manufactured by us As a world renowned provider of biometric technologies and services we pay much attention to the compliance with the laws related to human rights and privacy in every country while constantly performing research and development We hereby make the following statements 1 All of our fingerprint recognition devices for civil use only collect the characteristic points of fingerprints instead of the fingerprint images and therefore no privacy issues are involved 2 The characteristic points of fingerprints collected by our products cannot be used to restore the original fingerprint images and therefore no privacy issues are involved 3 We as the equipment provider shall not be held legally accountable directly or indirectly for any consequences arising due to the use of our products 4 For any dispute involving the human rights or privacy when using our products please contact your employer directly Our other police fingerprint equipment or development tools will provide the function of collecting the original fingerprint
25. election Bar you can quickly locate the users whose names start with this character Users are listed in alphabetical order by last name by default 4 3 Inches Facial amp Fingerprint Recognition Serial 25 4 Communication related Settings You can set related parameters for the communication between the FFR terminal and PC including the IP Address Gateway Subnet Mask Baud Rate Device ID and Comm Key E A i ir pm Es Data Mgt Bofipload FAS Exil a de x Weer Mgt SS Koeytinarel Aubo Tes 4 1 Network Settings When the FFR terminal communicates with the PC over Ethernet you need to check the following settings AFI Galeway 0 0 0 0 Wiegand Qulpol DAS Sener 0 0 0 0 Device ID IP Address The IP address is 192 168 1 201 by default and can be changed as required Subnet Mask The subnet mask is 255 255 255 0 by default and can be changed as required Gateway The gateway is 0 0 0 0 by default and can be changed as required DNS Server The DNS Server is 0 0 0 0 by default and can be changed as required Device ID This parameter is used to set the ID of device from 1 to 254 If the RS232 RS485 communication is adopted you need to enter the device ID on the software communication interface Comm Key To enhance the security of attendance data you can set a password for the connection between the FFR terminal and PC Once the password is set you can connect the PC with the FFR termina
26. erminal and PC over network to enhance the transfer speed 4 3 WIFI Option x Before the device is used for wireless network other physical groupware of 802 11 network such as joint distributing system wireless medium must be in existence ESSID to connect to the network must be known SSID SSID SSID to be connected to wireless network There is difference between small letter and capital letter Network Type there are two models infrastructure model for star structure and ad hoc model for peer to peer network Auth mode Infrastructure mode Infra includes five authentication modes OPEN SHARED WEPAUTO WPAPSK and WPA2PS002E Ad hoc model Adhoc includes four authentication modes OPEN SHARED WEPAUTO and WPANONE Encrypt Mode When the selected encrypt type is NONE the password in WEP Wired equivalent privacy and WPA WiFi protested access cannot be edited namely it is not necessary to input password IP address In 802 11 wireless networks there is DHCP Or enter IP interface to input correct IP address subnet mask and so on Operation Wiel Conligeration 55 NetworkType be inira Authiode b DPEN Enemi Mode b NONE Password IP Address Polni IP 4 3 Inches Facial amp Fingerprint Recognition Serial 27 Press the button after SSID item input the value which must be input or the cursor cannot be moved to other input box Then press to select the item to be set or press OK to do
27. evice Hame IFaced0z Serial Number 302600121011 mc MAC Address LAA IA it Hitte FP Algorithm 2K Finger VX10 0 Face Algorillin Erace AF Firmware Version Yer 0 0 0fbuild 300 Wendor Z ESoftware Inc dure lime 2011 09 11 1 4718 14 3 Power Info x The Power Info interface displays the current Power supply and Battery Info Show as below 4 3 Inches Facial 8 Fingerprint Recognition Serial 55 Menu System Information Records Power supply AL Dewee Dattery Into To 56 4 3 Inches Facial amp Fingerprint Recognition Serial Appendix Appendix 1 Text Input Instructions The FFR terminal supports the input of Chinese and English characters numbers and symbols Press related button to input text For example press Name to display the text input interface as shown in the following figure User Mgt Add User Continue Save User Mal Add User A PRA gt Fingerprint 2 User Mal Add User Continue Save AAA gt Fingerprint gt Password Ay User Mgt Add User Continue SAVE Keyboard Area Text Display Area Text List Area Exit ee aaa Sense eee ed ae Delete OEnter Space Chinese English Switch Key Character Number Switch Upper Lower Case Switch To enter a name proceed as follows 1 Press Name on the Add interface 4 3 Inches Facial amp Fingerprint Recognition Serial 57 User Mgt Add User Continue Save 2 Enter the char
28. fault and can also be set to administrator Ordinary users are only granted the rights of facial fingerprint card or password verification while administrators are granted the access to the main menu for various operations apart from having all the privileges granted to ordinary users Card Enroll a user card The length is 10 Photo Enroll a user s photo During user verification the user s photo is displayed on screen Notice The ID card is an optional function If you need this function please consult our commercial representatives or fore sale technical support personnel 3 1 1 Entering a User ID The FFR terminal automatically allocates an ID starting from 1 for every user in sequence If you use the ID allocated by the FFR terminal you may skip this section 1 Press User ID on the Add User interface to display the user ID management interface as shown in Figure 1 on the right Tip The user ID can be modified during initial enrollment but once enrolled it cannot be modified 2 On the displayed keyboard interface enter a user ID and press lt OK gt as shown in Figure 2 on the right If a prompt message The user ID already exists is displayed enter another ID 14 4 3 Inches Facial amp Fingerprint Recognition Serial Tip The FFR terminal supports 1 to 9 digit user IDs by default If you need to extend the length of current user ID numbers please consult our commercial representatives or fore sale techn
29. gt as shown In Figure 2 on the right Re enter the password according to the system prompt and then press lt OK gt Tip The FFR terminal supports the 1 to 8 digit passwords by default 3 After the password is entered an interface is displayed as shown in Figure 3 on the right Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information f T User Mgt Add User Continue SAVE 18 4 3 Inches Facial amp Fingerprint Recognition Serial 3 1 5 Enrolling a Face 1 Press Face on the Add User interface to display the face enrollment interface as shown in Figure 1 on the right User Mgt Add User Continue bi 2 On the displayed face enrollment interface as shown in Figure 2 on the right Eyes show in the box according to the voice prompts See 1 1 The Distance Facial Expression and Stand Pose 3 If your facial image is enrolled successfully the system will display a prompt message and automatically return to the Add User interface as shown in Figure 3 on the right Wi User Mgt Add User Continue DEVE 4 Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information 3 1 6 Entering a Group No The FFR terminal enables the facial comparison function by default During face enrollment the FFR a
30. han this threshold the matching is successful otherwise the matching is not successful The valid value scope is 70 120 The higher the threshold the lower the FAR and the higher the FRR and vice versa 1 1 N Threshold This parameter is used to set the threshold of matching between current face and the facial template enrolled in the FFR terminal in the 1 N verification mode If the similarity between current face and the facial template enrolled in the FFR terminal is larger than this threshold the matching is successful otherwise the matching is not successful The valid value scope is 80 120 The higher the threshold the lower the FAR and the higher the FRR and vice versa The recommended thresholds are as follows Threshold FRR FAR 1 N 1 1 High Low 85 80 Medium Medium 82 75 Low High 80 70 Exposure This parameter is used to set the exposure value of the camera The default value is 300 Quality This parameter is used to set a quality threshold for the facial images obtained The FFR terminal accepts 4 3 Inches Facial amp Fingerprint Recognition Serial 37 the facial images and processes them by adopting the facial algorithm when their quality is higher than the threshold otherwise it filters these facial images Note Improper adjustment of the Exposure and Quality parameters may severely affect the performance of the FFR terminal Please adjust the Exposure parameter only under the guidance of the after sales service
31. he FFR terminal Upload Picture Upload the JPG documents with ad_ as initial letters of document names stored in a USB disk to the FFR terminal After the upload these pictures can be displayed on the initial interface of the FFR terminal For details on picture specifications see Appendix 2 Upload User Photo Upload the JPG named with user ID in the USB disk to the FFR terminal After the upload when display the photo after the user successful verification For detail please see Appendix 6 Photo ID function 44 4 3 Inches Facial 8 Fingerprint Recognition Serial 8 Keyboard Definitions You can define six shortcut keys as attendance status shortcut keys or functional shortcut keys On the main interface of the FFR terminal press corresponding keys and the attendance status will be displayed or the function interface will be rapidly displayed 1 Press Keyboard on the main menu interface to display the Keyboard interface as shown in Figure 1 on the right Data Wiri Dy Lt pla 2 All the defined shortcut keys and their functions are listed on the Keyboard interface Press a shortcut key in the list to display the shortcut key editing interface Menu Keyboard A Sbabus Check4n Statue i Check Out Status 2 Aire ak Out Pahus 3 Breakin Status OT ln a T Slates L OT Oul 3 Edit the functional introduction of interface Key Options include F1 F6 Note When the FFR terminal supports both fingerprint an
32. he right B Press related shortcut key on the keyboard MENU TES Wednesday 1 TN b ea pon cad i 135 _ _ Check Out Greek Olul a Thin ODO Note You can enter the 1 1 recognition mode through B only after setting a shortcut key for 1 1 For details see 8 Keyboard Definitions 2 Enter user ID and then press the 1 1 Facial icon Figure 2 on the right to enter 1 1 facial recognition mode If the prompt Unregistered user is displayed the user ID is nonexistent or the user ID bearer has not enrolled his her face in the system 3 Compare the facial in a proper way For details see 7 7 The Distance Facial Expression and Stand Pose Current facial collected through the facial collector is displayed on the comparison interface as shown in Figure 3 on the right 6 4 3 Inches Facial amp Fingerprint Recognition Serial 4 If the verification is successful an interface as shown in Figure 4 on the right will be displayed The system will return to the main interface if the verification is not passed within 20 seconds MENU 11 11 14 Monday User 10 TNT Name Dane 12 47 Verified o 1 G facial verification Note When you open the 1 G Verify function then you can make 1 G facial verification For detail please see 5 5 Log Settings Current group No is displayed on the facial recognition interface Users in current group can perform facial comparison directly User
33. hown in Figure 3 on the right and returns to the Add User interface Press Card to display the enrolled card number as shown in Figure 4 on the right Add User Enroll Card 4 Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information 4 3 Inches Facial amp Fingerprint Recognition Serial 21 3 1 8 Enrolling an Mifare Card The 4 3 inches Facial Fingerprint Recognition Series Products only favors Mifare card s being an ID card use Use step and ID card to register an operation to accord Note Mifare card is an option function on the fingerprint machine if you want to customize the fingerprint machine with Mifare card function please contacts our market supporter and salesman 3 1 9 Modify User Rights 1 On the Add User interface press Role User to change the user as an administrator as shown in Figure 1 on the right Note There are two types of rights respectively granted to two types of users the User and Administrator User are only granted the rights of facial fingerprint or password verification while Administrator are granted the access to the main menu for various operations apart from having all the privileges granted to User 2 After the modification is done the interface is as shown in Figure 2 on the right Press Save to save current information and return to previous interface pres
34. ical support personnel 3 After the user ID is entered an interface is displayed as show in Figure 3 on the right Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information 4 3 Inches Facial amp Fingerprint Recognition Serial 15 3 1 2 Entering a Name Enter a user name through the keyboard 1 Press Name on the Add User interface to display the name input interface as show in figure 1 on the right User Mgt Add User Continue S gt Fingerprint Password 2 On the displayed keyboard interface enter a user name and press Enter as shown in figure 2 on the right For details of operations on keyboard interface see Appendix1 Text Input Instructions or User Mgt Add User Continue Save Tip The FFR terminal supports the 1 to 12 character names by default 3 Press X to confirm as shown in figure 3 on the right User bgt Add User 4 After the user name is entered the interface is displayed as shown in figure 4 on the right Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information 16 4 3 Inches Facial amp Fingerprint Recognition Serial 3 1 3 Enrolling a Fingerprint 1 Press Fingerprint on the Add User interface to display the Enroll Fingerprint interface as sho
35. image of citizens As for whether such a type of fingerprint collection constitutes an infringement of your privacy please contact the government or the final equipment provider We as the original equipment manufacturer shall not be held legally accountable for any infringement arising thereof Note The law of the People s Republic of China has the following regulations regarding the personal freedom 1 Unlawful arrest detention or search of citizens of the People s Republic of China is prohibited infringement of individual privacy is prohibited 2 The personal dignity of citizens of the People s Republic of China is inviolable 3 The home of citizens of the People s Republic of China is inviolable 4 The freedom and privacy of correspondence of citizens of the People s Republic of China are protected by law At last we stress once again that biometrics as an advanced recognition technology will be applied in a lot of sectors including e commerce banking insurance and legal affairs Every year people around the globe suffer from great loss due to the insecurity of passwords The fingerprint recognition actually provides adequate protection for your identity under a high security environment 4 3 Inches Facial amp Fingerprint Recognition Serial 63 Environment Friendly Use Description The Environment Friendly Use Period EFUP marked on this product refers to the safety period of time in which the product is used under the con
36. itch in a week the system checks whether the state needs to be switched by minutes When the user saves the settings the saving operation of the same day or same time does not take effect Appendix 6 Photo ID Function Some FFR terminals also support the Photo ID function The Photo ID function is used to display the photo enrolled by a user or stored in a USB disk on the screen in addition to such information as the user ID and name Operation Steps 1 When the photo taken by the FFR terminal is used the photo can be displayed upon successful verification 4 3 Inches Facial amp Fingerprint Recognition Serial 61 MENU 11 11 14 Monday User ID 10001 Veviby 1 6 Face 13 46 Verified 2 To use a photo stored in a USB disk proceed as follows A Create a folder with the name of photo in the USB disk and store users photos under this folder B The user photos must be in JPG format and named after their IDs For example for the user with user ID of 154 the photo name must be 154 jpg C Insert the USB disk into USB slot on the FFR terminal and select USB Disk Management gt Upload gt Upload Photos Then user photos can be displayed upon successful verification Note 1 The length of a user name cannot exceed 24 digits 2 The recommended size of a user photo is less than 30K 3 The uploaded new user photo will overwrite the existing photo in related to the user ID D To download user photos s
37. key 2 Time Current time is displayed Both the 12 hour and 24 hour time systems are supported 3 Date Current date is displayed 4 1 1 1 G Function Key You can enter the digital input interface of 1 1 1 G verification mode 5 Facial Image Default displays the facial image 6 Group No Display the current face group number 7 Attendance Status Current attendance status is displayed This key is hidden when Screen Shortcut Keys are displayed 8 Screen Shortcut Keys Press related shortcut keys to display the attendance status or enter the functional interface quickly Users can customize the function of each shortcut key For details see 8 Keyboard Definitions 4 4 3 Inches Facial amp Fingerprint Recognition Serial 9 Keyboard Shortcut Keys The Keyboard Shortcut Keys have a one to one relationship with Screen Shortcut Keys Press related shortcut keys to display the attendance status or enter the functional interface quickly 1 8 Verification Modes 1 8 1 Fingerprint Verification 1 1 N fingerprint verification The terminal compares current fingerprint collected by the fingerprint collector with all fingerprint data on the terminal 1 To enter the fingerprint verification mode The device automatically distinguishes face and fingerprint verification just pressing finger on the collector Shall be fingerprint authentication mode 2 Press your finger on the fingerprint collector by adopting the proper finger pla
38. l to access the attendance data only after entering the correct password The default password is O that is no password Once a password is set you need to enter this password before connecting the PC software with the FFR terminal otherwise the connection is unsuccessful 1 to 6 digit passwords are supported 4 2 Serial Port Settings When the FFR terminal communicates with the PC over serial ports RS232 RS485 you need to check the following settings 26 4 3 Inches Facial 8 Fingerprint Recognition Serial Menu Communication TEPAP Hees WIFI Baud Mate b 115200 Wiegand Output RS232 This parameter is used to enable or disable the RS232 communication If the RS232 communication cables are used set this parameter to ON RS485 This parameter is used to enable or disable the RS485 communication If the RS485 communication cables are used set this parameter to ON Baud Rate This parameter is used to set the baud rate for the communication between the FFR terminal and the PC It includes five options 9600 19200 38400 57600 and 115200 The high baud rate is recommended for the RS232 communication to achieve high communication speed while the low baud rate is recommended for the RS485 communication to achieve stable low speed communication Notice Considering the massive data including the fingerprint and facial templates stored in the FFR terminal it is recommended to transfer the data between the FFR t
39. mittee affiliated to the Security Industry Association SIA It is a non contact IC card reader interface and output protocol Wiegand26 defines the interface between the card reader and controller used in the access control security and other related industrial fields Wiegand26 helps standardize the work of the card reader designers and controller manufacturers The access control products manufactured by our company are also designed by following this protocol Digital Signals Figure 1 is asequence diagram in which the card reader sends digital signals in bit format to the access controller In this sequence diagram Wiegand follows the SIA s access control standard protocol for the 26 bit Wiegand card reader one pulse time ranges between 20us and 100us and the pulse jump time ranges between 200us and 20ms Data1 and Data0 are high level larger than Voh signals till the card reader prepares to send a data stream The asynchronous low level pulse smaller than Vol generated by the card reader is sent to the access control panel The saw tooth wave as shown in Figure 1 through Data1 or Data0 Data1 and Data0 pulses will neither overlap nor be generated synchronously Table 1 lists the maximum and minimum pulse width a consecutive pulse and pulse jump time time between pulses allowed by the F series fingerprint access control terminal Table 1 Pulse Time Symbol Definition Typical Value of Reader Pulse Width 100 us White Wi
40. n TMS EST secsasesesestasassssscbnceeusedssasssueasutaesasdetoncastes aveae nsw ad cesses tene I mance aaa sen ress 14 System INFORMATION 6 scssciasacccsvnssanccsdeccechoosasasennesessoaeatssonsesesceweeaeacdeseuas aA Aa Nin EE a E EES NA OEN Statement on Human Rights and Privacy aa Environment Friendly Use De SCriptiOn ccsssscscssssecsssssessssssscsssssscsssssscsssssscsssssscsssesscassessesesesecscsesecsssesecassssecssaesecesseess 4 3 Inches Facial amp Fingerprint Recognition Serial 1 Instruction for Use 1 1 The Distance Facial Expression and Stand Pose 1 The recommended distance The recommended distance between person and device is 0 5m applied to height range 1 5 1 85m According to the obtained face image from device to adjust when the face image is comparatively bright please move backwards appropriately when the face image is comparatively dark please move forwards appropriately Fi J Fi F Fi r 0 5M 2 The recommended facial expression and several poor effect facial expressions YES 3 The recommended stand pose and several poor effect stand poses During the enrollment and verification please remain the normal facial expression and stand pose YES 1 2 Enrollment Pose During the enrollment display the face in the centre of screen as possible According to the device s voice prompts do some small scope head actions such as turn left turn right rise bow and so on
41. n the summer to make people early to bed and early to rise so as to make full use of illumination resources and save electricity Clocks are adjusted backward in autumn The specific DLST regulations vary with countries To meet the DLST requirement the FFR terminal supports the DLST function to adjust forward on hour at xx Hour xx Minute xx Day xx Month and backward one hour at xx Hour xx Minute xx Day xx Month 1 Press Menu on the initial interface to display the main menu interface 2 Press Time Date on the main menu interface to display the time setting interface As shown in Figure 1 on the right Date Time DLST Settings Mode Sian Montb O Hour Min 01 01 00 00 End Month D HouwrMin 01 01 00 00 DLST Settings This parameter is used to enable or disable the DLST Mode You can select between Mode 1 and Mode 2 In Mode 1 the default mode the DLST is set in the Month Day Hour Minute format in Mode 2 the DLST is set in the Month Week Day Hour Minute format As shown in Figure 1 on the right The value scope of week WS 1 6 1 means the first week 2 the second week and so on and so forth The value scope of day WK 0 6 0 means Sunday 1 means Monday and so on and so forth 4 3 Inches Facial amp Fingerprint Recognition Serial 53 Start and End These two parameters are respectively used to set the start and end time of the DLST For example adjust the clock forward one h
42. o indicates the odd check that is there is an odd number of 1 s in the bit sequence including one parity bit For example for 1000110 0 the parity bit is O and there are already three 1 s After 0 is suffixed to 1000110 there is still an odd number of 1 s e indicates the even check that is there is an even number of 1 s in the bit sequence including one parity bit For example for 1000110 1 the parity bit is 1 and there are already three 1 s After 1 is suffixed to 1000110 there is an even number of 1 s b indicates both odd check and even check For example Definitions of several universal Wiegand formats Wiegand34 Data bits pccccccccccceccceccecceccecccccccccp Parity bits eeeeeeeeeeeeeeeeeOOOOOO00000000000 Note Wiegand34 consists of 34 bits The first bit is the even parity bit of bits 2 to 17 the 34 bit is the odd parity bit of bits 18 to 33 the second to the ninth bits are the site code the 10 to the 25 bits are the card number Wiegand37a Data bits pmmmmsssssssssssscccccccccccccccccccp Parity bits oeobeobeobeobeobeobeobeobeobeobeobeoe Note Wiegand37a consists of 37 bits The first bit is the odd parity bit of bits 3 4 6 7 9 10 12 13 15 16 18 19 21 22 24 25 27 28 30 31 33 34 and 36 the 37 bit is the odd parity bit of bits 2 4 5 7 8 10 11 13 14 16 17 19 20 22 23 25 26 28 29 31 32 34 and 35 bits 4 7 10 13 16 19 22 25 28 31 and 34 participate in both odd and
43. o set enable or close 1 G Verify function 5 6 Update You can upgrade the firmware program of the FFR terminal by using the upgrade file in the USB disk through this parameter Menu Settings Finmerare Version Display 38 4 3 Inches Facial amp Fingerprint Recognition Serial Notice If you need the firmware upgrade file please contact our technical support personnel Generally the firmware upgrade is not recommended 4 3 Inches Facial amp Fingerprint Recognition Serial 39 6 Data Management Through the Data Mgt menu you can perform management of data stored on the FFR terminal for example deleting the attendance record all data and promotional pictures purging management rights and resetting the FFR terminal to factory defaults ai e E Data Mgt pd Cmm Syb d z i Ez Keyboard Auto Test Calibration Dell Delete Transactions Delete all the attendance records Delete All Data Delete all the information of enrolled personnel including their fingerprints facial images and attendance records Clear Administrator Change all administrators to ordinary users Delete Picture Purge the promotional pictures uploaded from USB disks to the FFR terminal For details on how to upload promotional pictures see 5 4 Upload Picture Restore to Factory Settings Restore all parameter settings on the FFR terminal to factory settings Record Query the attendance records of employees within a specified
44. of your fingers or a touch pen When the touch screen is less sensitive to the touch you can perform screen calibration through menu operations 1 Press Menu on the initial interface to display the main menu interface 2 Press Calibration on the main menu interface to display the screen calibration interface Date Mgt OnfU plod 3 Touch the center of the cross 4 Repeat Step 3 following the move of the icon to different locations on the screen 5 Touch the center of the cross at five locations on the screen correctly When the message Calibrating screen pls wait is displayed on screen the calibration succeeds and the system automatically returns to the main menu If the calibration fails the system will request recalibration starting from Step 3 Calibrating screen ple walt 48 4 3 Inches Facial amp Fingerprint Recognition Serial 11 Bell Setting Lots of companies need to ring their bells to signal the start and end of work shifts and they usually manually ring their bells or use electric bells To lower costs and facilitate management we integrate the time bell function into the FFR terminal You can set the alarm time and duration for ringing the bell based on your requirements so that the FFR terminal will automatically play the selected ring tone and triggers the relay at the alarm time and stop playing the ring tone after the set duration Press Bell on the main menu interfa
45. olled o ID Facial Verification 1 Swipe your ID card properly at the swiping area to enter the 1 1 facial verification mode as shown in Figure 1 on the right 4 3 Inches Facial amp Fingerprint Recognition Serial 9 Comb WF 3 If the verification is successful an interface as shown in Figure 3 on the right will be displayed The system will return to the main interface if the verification is not passed within 20 seconds MENU 11 02 09 Wednesday User MI TMII Name Dave Yere 1 1 Face 16 35 Verified 10 4 3 Inches Facial 8 Fingerprint Recognition Serial 2 Main Menu There are two types of rights respectively granted to two types of users the ordinary users and administrators Ordinary users are only granted the rights of facial fingerprint password or card verification while administrators are granted the access to the main menu for various operations apart from having all the privileges granted to ordinary users Press Menu on the initial interface to access the main menu as shown in the following figure 11 02 11 Friday 1 1 Check Oiil AreakOul Break In OT Any user can access the main menu by pressing the Menu key if the system is free from administrators After administrators are configured on the terminal the terminal needs to verify the administrators identity before granting them access to the main menu To ensure terminal security it is recommended to set an admini
46. our at 08 00 on April 1 and backward one hour at 08 00 on October 1 2011 04 01 06 00 5 After setting the DLST press Done to return to the time setting interface Press Save on the time setting interface to save current settings and return to the previous interface press Cancel to directly return to previous interface without saving current information A DST Settings 10 478 ode if StarniMonth Week 1 star Menth O Hour Min Day Hour Min ly Sunday End Month D Hour Min End Month Week 1 XK i Day Hour Min ly Sunday 54 4 3 Inches Facial 8 Fingerprint Recognition Serial 14 System Information You can check the storage status as well as version information of the FFR terminal through the System Information option User Mgt Comm System Data Mgt 14 1 Records The number of enrolled users administrators and passwords is displayed on the Records interface the total fingerprint storage capacity and occupied capacity as well as the total attendance storage capacity and occupied capacity are graphically displayed respectively as shown in the following figure syelem Information Aalravin Wl Fran 1 F deve FP 2000 Face 400 Record 100000 Free 1995 Free 359 Freg 39967 Power Info Free 14 2 Device The Device name serial number version information vendor and date of manufacture are displayed on the Device interface Menu Syalen Iinformalion D
47. re yoh 7 7 1 I 1 i I I I 1 i I 1 Ww I 1 1 i Data O Signal I fl 1 Green Wire von 7777 77 TT FT TI A Aek Av i I I 1 I I I i i I I WON A A A A EEE A 1v i I 1 i ov Figure 1 Sequence Diagram 60 4 3 Inches Facial amp Fingerprint Recognition Serial Appendix 4 USB Host Fingerprint device may be used as USB host to exchange data with external U disk The data transmission speed is quick the traditional fingerprint device only supports the RS232 RS485 or Ethernet way for data transmission when as a result of physical condition limit data quantity big and the data transmission cost quite long time But the USB data transmission is quicker than any of the former transmission mode may complete downloading data by U disk in a short period of time like this greatly enhances the efficiency The operational steps of USB Host equipment please refer to 7 USB Disk Management Appendix 5 State Auto Switch The system supports six work states Check in Check out Break out Break in Overtime in OT In and Overtime out OT Out The state needs to be modified manually that is you can switch to the desired work State by pressing the corresponding button To decrease the manual operations the device menu provides a State Auto Switch option At the time specified by a user the device automatically switches the state The current state is displayed on the initial interface After the user sets the state Auto Sw
48. rification mode If the prompt Unregistered user is displayed the user ID is nonexistent or the user ID bearer has not enrolled his her password in the system 8 4 3 Inches Facial amp Fingerprint Recognition Serial 3 Enter the password and press the OK icon to start the password comparison as shown in Figure 3 on the right 11 11 14 Monday TVG User ID 10001 Name Dave Verity Posswor d 13 50 Verified 1 8 4 ID Card Verification Only the products with a built in ID card module support the ID card verification The products with a built in ID card module support the following two verification modes ID Card Only Users only need to swipe their ID cards for verification ID Facial Verification After passing the ID card verification you also need to perform facial verification For the settings of these two verification modes see 5 5 Log Settings e ID Card Only 1 If you have your ID card number enrolled in the system you can pass the verification by swiping your ID card at the swiping area in a proper way 2 If the verification is successful an interface as shown in Figure 1 on the right will be displayed 3 If the verification is not successful an interface as shown in Figure 2 on the right will be displayed MENU 11 07 09 Wedneslday i 1 01 19 Tuesday User IE 10001 Card No 0000205930 Name Dave a Verity PIN Card Weriby PIN Card 16 35 Veribieal Mol Enr
49. s User Mgt to directly return to previous interface without saving current information 3 1 10 Enroll Photo If you have enrolled your photo in the system the system will display your enrolled photo in addition to your ID and name after you pass the verification 1 Press Photo on the Add User interface to display the photo enrollment interface as shown in Figure 1 on the right 22 4 3 Inches Facial amp Fingerprint Recognition Serial 2 On the photo enrollment interface stand naturally in front of the screen For details see 1 1 Standing Position and Posture and Facial Expression Press Capture as shown in figure 2 on the right to display the photo taken at the lower left corner The successful capture interface is shown as figure 3 on the right 3 After taking the photo press Exit to return to previous interface User Mgt Add User Continue Sac I A 4 After the photo is taken the interface is as shown in Figure 4 on the right Press Save to save current information and return to previous interface press User Mgt to directly return to previous interface without saving current information 3 2 Edit a User Select a user from the User List to enter User Info interface The User ID cannot be modified and the other operations are similar to those performed to add a user You can re enroll your fingerprint and facial image change your password and modify the management rights Role
50. s enrolled his her card The user has enrolled his her password Note 1 In User List Area users are listed in alphabetical order by last name If you select a user in User List Area you can access the editing interface of this user to edit or delete related user information 2 In Character Selection Bar users are listed in alphabetical order by last name or by default and you can locate the desired user quickly You can press Query to locate and query a user through the user ID For details see 3 4 Querying a User 3 1 Adding a User Press Add on the User Mgt interface to display the Add User interface as shown below User Mgr Add User Centnue Sawe User ID Enter a user ID 1 to 9 digit user IDs are supported by default 4 3 Inches Facial amp Fingerprint Recognition Serial 13 Name Enter a user name 12 character user names are supported by default Fingerprint Enroll a user s fingerprint and the FFR terminal displays the number of enrolled fingerprints A user can enroll 10 fingerprints at maximum Face Enroll a user s face Password Enroll a user s password 1 to 8 digit passwords are supported by default Group No Set the group that the user belongs to Valid group No 1 24 Note When the user opens 1 G Verify function then display the set item of Group No or not For detail please see 5 5 Log Settings Role Set the rights of a user A user is set to ordinary user by de
51. s of another group can perform facial comparison only after entering the group No or selecting it using the shortcut key And the system will set the group entered or selected by users to be the current group instantly 1 Press 1 1 1 G on the screen to enter the 1 G recognition mode as shown in Figure 1 on the right 111114 Mondo mode 3 Compare the facial in a proper way For details see 1 1 Standing Position and Posture and Facial Expression Current Group No is displayed on the comparison interface as shown in Figure 3 on the right 4 3 Inches Facial amp Fingerprint Recognition Serial 7 TING Note Check whether you are in current group if not return to Step 1 4 If the verification is successful an interface as shown in Figure 4 on the right will be displayed 1111 14 Monday User 10 10001 Vorlhy 1 6 Face 03 46 Verified 1 8 3 Password Verification In the password verification mode the terminal compares the password entered with that in relation to the user ID 1 To enter the password verification mode you can A Press 1 1 on the screen as shown in Figure 1 on the right B Press related shortcut key on the keyboard MENU Note You can enter the 1 1 recognition mode through B only after setting a shortcut key for 1 1 For details see 8 Keyboard Definitions 2 Enter the user ID and then press the Key icon Figure 2 on the right to enter password ve
52. st bit is the even parity bit of bits 2 to 13 the 26 bit is the odd parity bit of bits 14 to 25 the second to the ninth bits are the site code the 10 to the 25 bits are the card number For details about the Wiegand protocol see Appendix 3 Introduction to Wiegand To customize Wiegand format proceed as follows 1 Select Define Format and the Set key is then enabled 2 Press Set to display the User Define Format interface as shown in the following figure Cand Format 3 Click the entry box below Card Format to display the following interface Display input in real time Display the number of bits in real time Backspace Cancel Confirm Input Clear Input Characters used to define data bits and their meanings c indicates the card number that is the output contents it can be set to User ID Card Number through menu 32 4 3 Inches Facial amp Fingerprint Recognition Serial operations f indicates the facility code which is 0 by default It is not configurable To modify it please contact the equipment supplier m indicates the manufacturer code which is 0 by default It is not configurable To modify it please contact the equipment supplier p indicates the parity position s indicates the site code which can be set from 0 to 255 by default 4 Click the entry box below Parity Format to display the following interface Characters used to define parity bits and their meanings
53. strator when using the terminal initially For detailed operations see 3 1 9 Modify User Rights The main menu includes ten submenus and three shortcut keys as shown in the following figure Return to Initial Interface Add a User Date Time Setting A System Information User Mgt System Data Mgt Dn Upload SN s e Ug Keyboard Auto Test Calibration Bell Access User Mgt Through this submenu you can browse the user information stored on the terminal including the user ID name fingerprint facial card password rights add modify or delete the user information Comm Through this submenu you can set related parameters for communication between the FFR terminal and PC including the IP address Gateway Subnet Mask Baud Rate Device ID and Comm Key and so on System Through this submenu you can set system related parameters including the General Display Fingerprint Face and Log Settings to enable the FFR terminal to meet user requirements to the greatest extent in terms of functions and display Data Mgt Through this submenu you can perform management of data stored on the FFR terminal for example Delete Transactions All Data and Picture Clear Administrator and Restore to Factory Settings Dn Upload Through this submenu you can import user information and attendance data stored in a USB disk to 4 3 Inches Facial amp Fingerprint Recognition Serial 11 related software or other fingerprin
54. t recognition equipment Keyboard Through this submenu you can customize six shortcut keys Related status will be displayed by pressing related status key Auto Test This submenu enables the system to automatically test whether functions of various modules are normal including the Screen Fingerprint Voice Face Keyboard and Time Calibration When the touch screen is less sensitive to the touch you can calibrate the screen on the calibration interface through this submenu Bell Through this submenu you can set the alarm time and duration Access Through this submenu you can set the parameters of the electronic locks and related access control devices Note When the user enable access then you can make access setting otherwise can t For detail please see 5 2 Display 12 4 3 Inches Facial amp Fingerprint Recognition Serial 3 User Management Browse the user information including the user ID name fingerprint FC face ID card password rights Add edit or delete the basic information of users Press User Mgt on the main menu interface to display the user management interface Return to the Menu interface Query a user Add a user Scroll bar fest A Linda h User list area Mark ta fk i i EMM ln ef ee i a Sad Character selection area Ft Ei The user is administrator The user has enrolled his her fingerprint The user has enrolled his her facial image amp The user ha
55. time range WorkCode Add edit or delete the work codes of employees Notice The employee information and attendance records will not be deleted during restoration to factory settings 6 1 Query a Record After check in successfully the employee s attendance records are saved in the FFR terminal You can easily query these attendance records Dala Mgl User ID Query Time Period User ID Enter the user ID of the employee to query If this field is left blank you can query the attendance records of all the employees If you enter a user ID you can query the attendance record of the employee with this user ID Query Time Period Select a time period to query including the customized time period yesterday this week last week this month last month and all time periods 40 4 3 Inches Facial amp Fingerprint Recognition Serial Start and End When you select a customized time period you need to input a start time and an end time When you select other options for time period the start and end time will be automatically adjusted to the related time After setting the query conditions press Query and the records that meet the specified query conditions will be displayed on screen As shown in Figure 2 on the right Ant Log loial Record 20 10001 1429 14025 14 24 14023 14022 14 22 14 13 14 06 14 07 14 05 14 05 14 05 1150 13 49 13 40 1 40 13 40 11 47 13 46 14 4h Select the row where the desired record is located yo
56. to ensure that the different parts of face are input into system to improve the verification accuracy The enrollment poses are as follows 4 3 Inches Facial amp Fingerprint Recognition Serial 1 1 3 Finger Placement Recommended fingers The index finger middle finger or the ring finger the thumb and little finger are not recommended because they are usually clumsy on the fingerprint collection screen Pressing method 1 Proper finger placement The finger is flat to the surface and centered in fingered guide Notice Please enroll and verify your fingerprint by using the proper finger placement mode We shall not be held accountable for any consequences arising out of the degradation in verification performance due to improper user operations We shall reserve the right of final interpretation and revision of this document 1 4 Use of Touch Screen Touch the screen with one of your fingertips or the top of the forward edge of a fingernail as shown in the following figure A broad point of contact may lead to inaccurate pointing When the touch screen is less sensitive to the touch you can perform screen calibration through menu operations Press Menu Calibration on the screen and a cross icon will be displayed After you touch the center of the cross at 2 4 3 Inches Facial amp Fingerprint Recognition Serial five locations on the screen correctly the system automatically returns to the main menu Press Return to
57. u can query the detailed information of this record for example the detailed attendance record of the employee with user ID 10001 on November 14 2011 As shown in Figure 3 on the right 11 14 14 24 11 14 14 25 11141424 11 14 14 2 11 14 14 37 1114 14 22 11 14 14 13 11 14 14 08 6 2 Work Code Employees salaries are subject to their attendance records Employees may be engaged in different types of work which may vary with time periods Considering the salaries vary with work types the FFR terminal provides a parameter to indicate the corresponding work type for every attendance record to facilitate rapid understanding of different attendance situations during the handling of attendance data 1 Addawork code 1 Press Add on the WorkCode interface as shown in Figure 1 on the right to display the Add interface Date Management WorkCode No A digital code of the work code Label The meaning of the work code 2 Press the corresponding entry button of No on the Add interface as shown in Figure 2 on the right to display the No entry interface On this interface enter a No 4 3 Inches Facial amp Fingerprint Recognition Serial 41 Work ode 3 Press the corresponding entry button of Label on the WorkCode interface as shown in Figure 3 on the right to display the text entry interface On this interface enter a label of work code See Appendix 1 Text Input Instructions Work ode 2 Edit
58. upon successful verification 0000000001100110000100011110100001 Even parity bit User ID Binary code of 0013378512 Odd parity bit 3 The Wiegand output is as follows upon verification failure 0000000000000000000000000000000010 Even parity bit Failed ID Binary code of 1 Odd parity bit 4 3 Inches Facial amp Fingerprint Recognition Serial 31 4 4 3 Customized Format Apart from the two built in formats Wiegand 26 bits and Wiegand 34 bits the system also supports the format customization function to meet individualized requirements The customized format consists of two character strings the data bits and parity bits These two character strings need to be defined separately Data bits define the number of binary bits output by Wiegand as well as the meaning of each bit The data bits output by Wiegand can be a card number C site code s facility code f manufacturer code m and parity bits p Parity bits define the check mode of each bit in data bits and ensure the correctness of data bits during transfer through the parity check The parity bits can be set to odd check o even check e and both odd check and even check b There exists a one to one correspondence relationship between the data bits and parity bits For example the Wiegand26 can be customized as follows Definition of data bits pssssssssccccccccccccccccp Definition of parity bits eeeeeeeeeeeee0000000000000 Note Wiegand26 consists of 26 bits The fir
59. utomatically allocates a group No starting from 1 for every user in sequence When the number of users in Group No 1 reaches the upper limit the rest users fall under Group No 2 automatically If you use the group No allocated by the FFR terminal you may skip this section 1 Press Group No on the Add User interface to display the group No management interface as shown in figure 1 on the right 4 3 Inches Facial amp Fingerprint Recognition Serial 19 2 On the displayed keyboard interface enter your group No and press lt OK gt as shown in figure 2 on the right Tip A valid group No contains 1 5 digits 3 After the group No is entered an interface is displayed as shown in figure 3 on the right Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information Tip Please remember your own group No 20 4 3 Inches Facial amp Fingerprint Recognition Serial 3 1 7 Enrolling an ID Card 1 Press Card on the Add User interface to display the Enroll Card interface as shown in Figure 1 on the right 2 The Punch Card interface pops out as shown in Figure 2 on the right Swipe your ID card properly in the swiping area For details see 1 6 Appearance of the FFR Terminal 3 If the card passes the verification the FFR terminal displays a prompt message Read Successfully Card No ARRE as S
60. utomatically tests whether the voice files are complete and the voice quality is good by playing the voice files stored in the terminal You can continue the test by touching the screen or exit it by pressing Auto Test Keyboard Test The FFR terminal tests whether every key on the keyboard works normally Press any key on the Keyboard Test interface to check whether the pressed key matches the key displayed on screen The keys are dark gray before pressed and turn blue after pressed Press Auto Test to exit the test Fingerprint Test The FFR terminal automatically tests whether the fingerprint collector works properly by checking whether the fingerprint images are clear and acceptable When the user places his her finger in the fingered guide the collected fingerprint image is displayed on the screen in real time Press Auto Test to exit the test Face Test The FFR terminal automatically tests whether the camera works properly by checking whether the collected facial images are clear and acceptable Press Auto Test to exit the test Time Test The FFR terminal tests whether its clock works properly by checking the stopwatch of the clock Touch the screen to start counting and touch it again to stop to check whether the counting is accurate Press Auto Test to exit the test 4 3 Inches Facial amp Fingerprint Recognition Serial 47 10 Screen Calibration You can perform all the menu operations by touching the screen with one
61. wn in Figure 1 on the right 2 On the displayed Enroll Fingerprint Interface as shown in the Figure 2 on the right place your finger on the fingerprint collector properly according to the system prompts For details see Finger Placement Enroll Fingerprint 0 Enrolled Success bully 3 Place the same finger on the fingerprint collector for three consecutive times correctly If the enrollment succeeds the system will display a prompt message Enrolled Successfully and automatically return to the Add User interface as shown in Figure 3 and 4 on the right If the enrollment fails the system will display a prompt message and return to the Enroll Fingerprint interface In this case you need to repeat the operations of step 2 Enroll Fingerprint 1000 1 0 Place Finger Quality a fA gt f i 4 You can back up the enrolled fingerprint of a user by pressing Fingerprint A user can enroll 10 fingerprints at maximum Pa Grou E d 5 Press Save to save current information and return to the previous interface Press User Mgt to return to the previous interface without saving current information 4 3 Inches Facial amp Fingerprint Recognition Serial 17 3 1 4 Enrolling a Password 1 Press Password on the Add User interface to display the password management interface as shown in Figure 1 on the right 2 On the displayed keyboard interface enter a password and press lt OK

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents