Руководство пользователя для POS-монитора Posiflex LM-2210
Contents
1. button to select among OSD time OSD horizontal position OSD vertical position and exit OSD TIME When this item is selected there will be only the OSD time icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds Default value is 30 seconds Press OSD button to save the current setting and return to OSD submenu OSD HORIZONTAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift OSD window right Press to shift left Press OSD button to save the current setting and return to OSD submenu OSD VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area Part 8 J and the video signal mode Press button to move OSD window downward Press to go upward Press OSD button to save the current setting and return to OSD submenu E EXIT Return to Tools submenu RESET TO DEFAULT Pressing OSD button on this icon will set all parameters back to the status when the monitor is factory installed SMOOTHNESS SHARPNESS ADJ2. standby no signal e Blue operating Before routing the cable please release the hooks CABLE ROUTING IN BASE LM 2210 Of stand s back cover as arrowed in the right picture For cable routing in mini slim base please refer to the picture at left There are 2 cable tie holder slits on the metal bracket for the trunk as arrowed in the picture Hold all the external cables with a cable tie through the right cable tie holder slit and leave the cables to the left holder slit Have all cables to pass through the oval hole on the trunk to come out of the front side of trunk Connect all the cable ends to main unit Be sure not to damage any cable during this operation Part 3 VESA MOUNT After releasing the stand s back cover please unfasten these two screws to remove the main structure of base stand which arrowed in the right picture After that please use flat drill to release the hinge cover from the arrowed side as show in the right picture Next unfasten these four screws which fix the hinge as shown in the middle right picture and remove the hinge Now there are four screws holes which fit in with VESA standard 75mm and use another four bind head screws which attached in the packing kit to fasten on the VESA arm or bracket CABLE ROUTING IN BASE LM 2310 Before routing the cable please release the hooks of back cover of stand as arrowed in the right picture For cable routing in mini slim base p
3. On Screen Display adjustment The OSD window will pop up on the screen On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right part Below this area are a row of icons for main OSD menu Below the main menu are a group of icons for submenu that corresponds to one icon selected in the main menu An analysis of the video signal on resolution and refresh rate will be displayed at the bottom Applicable icons in the main menu and its subsequent menus are illustrated below MAIN MENU There are a total of 5 icons in this menu Do OKR One of the 5 icons will be displayed in inverted color to indicate its relationship with the submenu below Pressing NXT button will shift the Part 5 selected icon one by one from left to right and then wrap around to the leftmost part Press OSD button to enter the selected sub menu If there is no button for OSD setting is pressed within a period of time about 5 seconds to 1 minute as programmed the OSD window will disappear with all the adjusted parameters saved Items in sub menu are illustrated below ii BRIGHTNESS CONTRAST ADJUST SUBMENU There are 3 icons in this submenu WAE Press OSD button to select item or return to main menu Press NXT button to select among brightness contrast and exit BRIGHTNESS ADJUST When this item is selected there will be only the brightness icon with an adjustment indication bar u
4. gt HERA He ARISE AS AYR aA BG RRA BOREL AS B
5. POSIFLEX LM 2310 2210 LCD Monitor User s Manual Rev Original FCC NOTICE This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference WARRANTY LIMITS Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians The user should consult his her dealer for the problem happened Warranty voids if the user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused by improper application ABOUT THIS MANUAL This manual assists the user to utilize the Touch Monitor LM 2310 LM 2210 This product provides exquisite touch control capability over a stable and adjustable LCD monitor with minimal footprint The manufacturer of the LM 2310 LM 2210 monitor heartily apologizes to the user for reserving the right to change or to modify this manual wi
6. UST When this item is selected there will be only the smoothness sharpness adjustment icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase smoothness of display decrease sharpness Press to go the other way Press OSD button to save the current setting and return to OSD submenu MODE SELECT Pressing OSD button on this icon will have no effect at all if the display mode is not one of the confusing modes The confusing modes here mean 640 x 400 or 720 x 400 in display resolution as both modes have refresh rate of 70Hz horizontal frequency of 37 9KHz and pixel frequency of 31 5MHz making it impossible for automatic select These modes are not used in normal Windows display E EXIT Return to Main menu E EXIT Exit OSD setup with all adjustment saved SUPPORTED DISPLAY MODES For video signals beyond the supported display modes there will be a message Out Of Range on the middle of screen Maximum supported color depth is 24 bits or 16 7M colors Supported display modes are illustrated in the table Display Resolution Refresh Rate Hz oo KHz 640 400 70 37 9 60 31 5 640 480 72 37 9 75 37 5 720 400 70 37 9 56 35 1 60 37 9 ae 72 48 1 75 46 9 POSIPLEX e S 131454 ERATARA AE AL ZEB CERO i Sepie gt kakai ERR ERAT TEBE RS E Part 9 Be
7. and the video signal mode Press or button to adjust the pixel synchronization phase for the best picture display Press OSD button to save the current setting and return to Geometry adjust submenu HORIZONTAL POSITION When this item is selected there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or button to shift the screen display to the right or left Press OSD button to save the current setting and return to Geometry adjust submenu E VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift up the screen display Press to shift down Press OSD button to save the current setting and return to Geometry adjust submenu E EXIT Return to Main menu TOOLS SUBMENU When this item is selected there are 5 icons in this submenu OMME Press OSD button to select item or return to main menu Press NXT button to select among OSD submenu reset to default phase smoothness sharpness adjust mode select and exit OSD SUBMENU When this item is selected there are 4 icons in this submenu PAE Press OSD button to select item or return to main menu Press NXT
8. lease refer to the picture below There are 3 cable tie holder slits on the metal bracket for the trunk as arrowed in the picture Hold all the external cables with a cable tie through the right cable tie holder slit and leave the cables to the left holder slit Have all cables pass through the oval hole on the trunk to come out of the front side of trunk Connect all the cable ends to main unit Be sure not to damage any cable during this operation Part 4 Assembling and Disassembling LM 2310 After releasing the back cover of stand please unfasten these 4 screws to remove the main structure of base stand shown in the rightmost picture Next unfasten these 3 screws which fix the hinge as shown in the right picture Now there are 3 screws holes which fit in with VESA standard 75mm After that please use flat drill to release 3 screws shown in the right picture OSD The monitor can be turned OFF only when there is video signal turned ON only when there is video signal and after the Turn Off Panel message vanishes The default status is set to ON when power is supplied unless manually turned OFF Since this button controls only the display power but not the display controller please try to disconnect the power cable or the VGA cable once unfortunately the screen display goes into a power off mode OSD functions Press OSD button with a normal display on the screen to activate the OSD functions
9. lvin F200 9300K Pressing OSD button on this icon will set the color balance to a color temperature of 9300 degrees Kelvin EI EXIT Return to Color adjust submenu E EXIT Return to Main menu GEOMETRY ADJUST SUBMENU There are 6 icons in this submenu MESUESE Press OSD button to select item or return to main menu Press NXT button to select among auto geometry adjustment horizontal size phase horizontal position vertical position and exit AUTO GEOMETRY ADJUST Upon an OSD button press on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at the center of the screen Press NXT button to switch the selection Press OSD button to make the choice H ACCEPT Accept the adjustment setting REJECT Decline the adjustment setting and return to previous setting e HORIZONTAL SIZE When this item is selected there will be only the horizontal size icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase horizontal size Press to decrease Press OSD button to save the current setting and return to Geometry adjust submenu SS PHASE When this item is selected there will be only the Part 7 phase adjustment icon with an adjustment indication bar under it between the main menu area
10. nder it between the main menu area and the video signal mode Press button to increase brightness Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu A CONTRAST ADJUST When this item is selected there will be only the contrast icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase contrast Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu E EXIT Return to Main menu MJ COLOR ADJUST SUBMENU There are 4 icons in this submenu ESB Press OSD button to select item or return to main menu Press NXT button to select among auto color adjust auto RGB reset Color balance adjust and exit AUTO COLOR ADJUST Upon an OSD button press on this icon the monitor will perform an automatic color adjustment and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice ACCEPT Accept the adjustment setting REJECT Decline the adjustment setting and return to previous setting re AUTO RGB RESET Upon an OSD button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at the center of the sc
11. reen Press NXT button to switch the selection Press OSD button to make the choice ACCEPT Accept the reset result REJECT Decline the reset and return to previous setting le COLOR BALANCE ADJUST When this item is selected there will be 7 icons in this Se as item between Part 6 main menu area and the video signal mode Press OSD button to select an item or return to color adjust submenu Press NXT button to select among separate color adjustment 4200K 5000K 6500K 7500K 9300K and exit SEPARATE COLOR ADJUST When this item is selected there will be 3 adjustment indication bars between the main menu area and the video signal mode Press NXT button to select among the 3 colors Red Green and Blue respectively Press button to intensify that color Press to reduce Press OSD button to save the current setting and return to Color balance adjust submenu 4200K Pressing OSD button on this icon will set the color balance to a color temperature of 4200 degrees Kelvin 000K 5000K Pressing OSD button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin 6500K Pressing OSD button on this icon will set the color balance to a color temperature of 6500 degrees Kelvin 7500 7500K Pressing OSD button on this icon will set the color balance to a color temperature of 7500 degrees Ke
12. thout notice due to the rapid and constant progress and improvement on science and technology The user may always obtain the most up to date information through any of our web sites http www posiflex com http www posiflex com tw http www posiflexusa com Copyright Posiflex Technology Inc 2012 P N 1 1 1 TRADE MARKS AND SERVICE MARKS AN Hotere C POSIFLEX is a registered trademark of Posiflex Technology Inc Other brand and product names are trademarks and registered trademarks and service marks of their respective owners l FEATURES e LM 2310 LM 2210 is principally designed for Posiflex KS series POS solutions 10 LCD monitor with tilt adjustment for industrial and commercial use High quality TFT LCD panel Easy maintenance structure allowing easy cleaning Super VGA monitor resolution up to 800 x 600 pixels Support power supply through LCD cable from Posiflex Terminal to operate without power adaptor Part 1 ll PARTS IDENTIFICATION A FRONT VIEW LM 2210 LM 2310 Main Unit Display Screen _ Power LED Stand B REAR VIEW LM 2210 LM 2310 Base Stand Cable Exit Joint Bracket C SIDE VIEW LM 2310 VGA Connector and DC jack Control button area OSD button NXT button Power switch Part 2 C SIDE VIEW LM 2210 Control button area OSD button NXT button pn button button Power switch D POWEPOWER LED INDICATION e Green
Download Pdf Manuals
Related Search