LumiTTMLT4 T8 LED tubes A5ban.cdr
Contents
1. 1 Turn OFF the main power source 1 Turn OFF main power source 2 Remove existing fluorescent tube 2 Remove existing fluorescent tube 3 Modify the circuits according to the following drawing 3 Modify the circuits according to the following drawing 4 ONLY the end with AC INPUT label can be connected to 4 ONLY the end with AC INPUT label can be connected to the AC power source the AC power source 5 Turn ON the main power to light it 5 Turn ON the main power to light it Before Fai i Te Inductive Ballast Electronic Ballast 4 Ma FL TUBE F FL TUBE a AC input After AC input After LumiT LTA LED Tube E LumiT ures LED Tube IE For more information please check the LT4 data sheet sales sgslight com www sgslight com The document is subject to change without notice Copyright 2014 SGSLIGHT Ltd All rights reserved Please visit www sgslight com for the latest version Latest Update 21st Feb 2014 version 22. SGOSLIGHT USER MANUAL Lighting Solutions LumiT LT4 T8 LED Tube READ THOROUGHLY BEFORE INSTALLING SAVE THE USER MANUAL FOR FUTURE USE GENERAL The LumiT LT4 T8 LED tubes are designed for energy saving that can replace the traditional fluorescent tubes and should be installed and maintained according to the following recommendations They are designed to operate in ambient temperatureranging from 20 C to 40 C UNPACKING The tubes have been properly packed so that no parts should have been damaged during transit Inspect to confirm The carton should contain one luminaire and an User Manual NOTE Be careful not to impact or scratch the lens HANDLING Damage may occur if the luminaire is improperly handled outside of pack Do not impact the luminaire after removal from packaging AWARNING To avoid the risk of electric shock fire or injury please note the following before installation or maintenance e Make sure the main power source is turned OFF e Make sure the luminaire fixture is grounded e Do NOT take the luminaire apart or reassemble it e Do NOT look directly at LED light source while working e Do NOT use the luminaire in raining or wet environment e Turn power ON before making sure the luminaire is properly e Check to confirm the rated working voltage and specification installed INSTALLATION STEPS Retrofit Luminaire with Electronic Ballast Retrofit Luminaire with Inductive Ballast
Download Pdf Manuals
Related Search