Multi-Color Atomic Alarm Clock
Contents
1. Fahrenheit Celsius Alarm Time Set Alarm Activate Deactivate Alarm Snooze Alarm Backlight A C Power Adapter Batteries USB Charge Port Temperature Trend Arrows Humidity Trend Arrows Moon Phase Position the Atomic Alarm Clock Specifications Indoor Power Requirements Battery Life Dimensions Low Battery Icon Care and Maintenance Warranty Information OD 00 0 00 DO DONNNNDDADNADDOOA nrn kKr HHP BhWBWWWAWONN Setup Instructions Step by Step STEP 1 e Insert the power adapter plug into a wall outlet e Insert the 5 volt A C power adapter into the back of the atomic alarm clock for a continuous backlight e The atomic alarm clock will light up and display indoor temperature and time 12 00 IMPORTANT When operating on A C power the backlight and USB charging port will turn off while the atomic alarm clock searches for the WWVB to avoid interference The backlight will return after 4 8 minute search which occurs during the late night or early morning hours The USB charging port will then resume working STEP 2 Optional battery operation e Remove the battery cover from atomic alarm clock Slide tab up and pull out to remove the battery cover e Insert 2 NEW AAA batteries included into the back of the atomic alarm clock Observe the correct polarity see markings inside the battery compartment Note When operating on battery power only the backlight will come on for 10 seconds when the LIGHT button is press2. setup Enter program menu set time Select temperature in F C date etc setup ALARM Once View Alarm Alarm set Twice Activate or Deactivate Alarm 1 step forward setup Fast advance setup 1 step backward setup Fast backward setup WWVB Search LIGHT Once Backlight low A C HI LOW OFF Twice Backlight OFF A C 3rd time Backlight ON A C NOOZE sie Activate backlight for 10 seconds battery power Trigger snooze alarm active Program Menu The program menu allows you to select your preferences WWVB Reception ON OFF Time Zone Daylight Saving Time Indicator ON OFF 12 24 Hour Time Format Hour Minutes Year Month Date WWVB Reception ON OFF The F C SET button will move through the program menu The or buttons will change a value 1 Hold the F C SET button 5 seconds WWVB and the word ON will flash ON 2 Press and release the or buttons to turn this to OFF if you do not wish WWVB WWVB reception 3 Confirm with the F C SET button and move to the time zone Time Zone The time zone is defaulted to Eastern Time EST Select your time zone and the atomic alarm clock will set the time correctly after receiving the WWVB time signal EST 1 EST will flash 2 Press and release the or buttons to select a different Time Zone AST Atlantic EST Eastern CST Central MST Mountain PST Pacific AKT Alaska HAT Hawaiian time zone 3 Confirm with the F C SET button
3. 54601 Online at www lacrossetechnology com k84292 Contact Support 1 608 782 1610 Product Registration www lacrossetechnology com support register Protected under U S Patents 5 978 738 6 076 044 6 597 990 All rights reserved This handbook must not be reproduced in any form even in excerpts It may not be duplicated or processed using electronic mechanical or chemical procedures without written permission of the publisher This handbook may contain mistakes and printing errors The information in this handbook is regularly checked and corrections made in the next issue We accept no liability for technical mistakes or printing errors or their consequences All trademarks and patents are acknowledged 10
4. and move to the daylight saving time indicator Daylight Saving Time Indicator ON OFF The Daylight Saving Time indicator should be ON if you live in an area that observes DST The indicator allows automatic time adjustments when we are into and out of daylight saving time 1 DST will flash and the word ON ON 2 Press and release the or buttons to turn this to OFF if you do not observe DST DST 3 Confirm with the F C SET button and move to the 12 24 hour time 12 hour or 24 hour Time Format The Time may be displayed in 12 hour or 24 hour format Default is 12 hour time Note When in 12 hour format AM or PM will show in front of the hour 1 Hold the F C SET button for three seconds to enter time set mode 1 2H 2 12H will flash 3 Use the or buttons to choose 12 hour or 24 hour time format 4 Press the F C SET button to confirm and move to hour Set Time To set the time manually The Hour digit will flash Use the or buttons to choose the hour x Press the F C SET button to confirm and move to minutes GH S The Minutes will flash Use the or buttons to choose the minutes Press the F C SET button to confirm and move to the year v O O IS ee Set Calendar To set the calendar The Year will flash Use the or buttons to choose the year T Press the F C SET button to confirm and move to the month The Month will flash ii Use the or buttons to choose t
5. LA CROSSE TECHNOLOGY Multi Color Atomic Alarm Clock with USB Charging Snooze Model K84292 Instruction Manual Introduction The atomic alarm clock features radio controlled time indoor temperature humidity and moon phase on a colorful and easy to read display Includes backlight with dimmer calendar with month date weekday display and alarm with snooze Use the integrated USB charging port to charge your smartphone camera or other devices while you sleep Multi Color Atomic Alarm Clock tbe FRI Celb TEMPERATURE MONTH DATE HUMIDITY LA CROSSE TECHNOLOGY Atomic time and date auto sets Time display hour minutes 12 24 hour time and 10 minutes snooze alarm 7 time zones AST EST CST MST PST AKST HAST Calendar month day date USB charging port 0 5A output for mobile devices charging cord not included Indoor temperature with trend arrow Indoor humidity with trend arrow Moon phase Multi color display Continuous illuminated backlight using AC power Backlight dimmer high low off Low battery icon Table of Contents Introduction Multi color Atomic Alarm Clock Features Table of Contents Setup Instructions Step by Step Troubleshooting Power the Atomic Alarm Clock A C Power Adapter Batteries WWVB Radio Controlled Time Reception Function Buttons Program Menu WWVB Reception ON OFF Time Zone Daylight Saving Time Indicator ON OFF 12 hour or 24 hour Time Format Set Time Set Calendar
6. LARM button to deactivate the alarm The alarm icon will disappear when alarm is inactive Note When the alarm sounds it will continue for two minutes then shut off Snooze e When the alarm sounds press the SNOOZE button to trigger snooze alarm for 10 minutes The snooze icon Zz will flash when the snooze feature is active e To stop alarm for one day press the ALARM button while in snooze mode The alarm icon lt S 3 will remain solid Note When the alarm sounds press any button except the ALARM button to turn the alarm off Backlight A C Adapter The backlight is on continuously when operating the atomic alarm clock with the 5 volt A C adapter The backlight has three settings High Low and OFF for your viewing comfort Operating on A C power The backlight is displayed constantly unless it is turned off Press and release the LIGHT HI LOW OFF button to adjust the backlight intensity e ON High intensity The backlight is defaulted to HI when the adapter is in use e ON Low intensity Press and release LIGHT HI LOW OFF button once e OFF Press and release LIGHT HI LOW OFF button e ON Press and release LIGHT HI LOW OFF button again Note When the adapter is NOT in use the High Low On Off features are not available Battery Power Operating on battery power Press the LIGHT HI LOW OFF button to display the backlight for 10 seconds Note The backlight will not stay on when operating on battery power USB C
7. ase to La Crosse Technology Ltd or La Crosse Technology Ltd s authorized service center La Crosse Technology Ltd will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of La Crosse Technology Ltd and must be returned to La Crosse Technology Ltd Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer La Crosse Technology Ltd will pay all expenses for labor and materials for all repairs covered by this warranty If necessary repairs are not covered by this warranty or if a product is examined which is not in need or repair you will be charged for the repairs or examination The owner must pay any shipping charges incurred in getting the La Crosse Technology Ltd product to a La Crosse Technology Ltd authorized service center La Crosse Technology Ltd will pay ground return shipping charges to the owner of the product to a USA address only The La Crosse Technology Ltd warranty covers all defects in material and workmanship with the following specified exceptions 1 damage caused by accident unreasonable use or neglect including the lack of reasonable and necessary maintenance 2 damage occurring during shipment claims must be presented to the carrier 3 damage to or deter
8. ed e Do Not Mix Old and New Batteries e Do Not Mix Alkaline Standard Lithium or Rechargeable Batteries Troubleshooting e lf the atomic alarm clock does not display the indoor temperature after 30 seconds remove the A C power adapter batteries and start the setup process again Power the Atomic Alarm Clock The atomic alarm clock can be powered by the 5 volt A C adapter or batteries A C Power Adapter e Insert enclosed 5 volt a c power adapter into a wall outlet then into the atomic alarm clock le IMPORTANT ht and USS power wiii morn oooooo0oo0oo0oo0000 oOo oo one one one one one one oo OO oo oo Batteries 1 Slide tab up and pull out to remove battery cover 2 Install two NEW AAA batteries included according to the polarity markings e Do Not Mix Old and New Batteries e Do Not Mix Alkaline Lithium Standard or Rechargeable Batteries lf the atomic alarm clock does not display indoor temperature after 60 seconds remove adapter and batteries and wait for at least 60 seconds before repeating the setup process WWVB Radio Controlled Time The NIST radio station WWVB is located in Ft Collins Colorado and transmits the exact time signal continuously throughout the United States at 60 KHz The signal can be received up to 2 000 miles away through the internal antenna in the atomic alarm clock However due to the nature of the Earth s lonosphere reception is very limited during dayligh
9. hange since 10 30am Temperature rose more than 1 C 2 F in the past three hours Temperature has not changed more than 1 C 2 F in the past three hours Temperature fell more than 1 C 2 F in the past three hours Humidity Trend Arrows The indoor humidity trend indicators are updated every 30 minutes These trends arrows represent humidity changes over the past three hours Humidity rose more than 1 RH in the past three hours gt Humidity has not changed more than 1 RH in the past three hours Humidity fell more than 1 RH in the past three hours Moon Phase The moon phase is based on the year month and date set manually or by the WWVB signal These are the moon phases displayed by the atomic alarm clock NEW WAXING FIRST WAXING FULL WAXING LAST WANING CRESCENT QUARTER GIBBOUS GIBBOUS QUARTER CRESCENT Waxing indicates growing or expanding illumination and happens after a new moon Waning indicates decreasing illumination and occurs after a full moon Crescent refers to the moon being less than half illuminated Crescents can be waning or waxing e Gibbous describes a moon phase when more than half is illuminated Gibbous can be waxing or waning e New Moon occurs when the moon is between the earth and sun so the illuminated portion of the moon is on the back side facing the sun and we cannot see it After a new moon the illuminated portion will increase or wax until the full moon occurs e F
10. harge Port The integrated USB charging port on side will charge your smart phone camera or other devices when the atomic alarm clock is plugged into a power outlet with the included 5V A C adapter Note This is a power output charging port The charging port does not supply power to the atomic alarm clock Begin charging your external device by connecting the device s USB charging cable not included to the USB charging port on the side of the atomic alarm clock Charging times will vary Note Some USB cables are for data transfer only and cannot be used for charging e Make sure that the USB cable you use will charge your device e Most USB cables included with mobile devices will work for charging USB Power Output 0 5A maximum current DO NOT overload the USB port Charge 0 5A devices or less only IMPORTANT When operating on A C power the backlight and USB charging port will turn off while the atomic alarm clock searches for the WWVB to avoid interference The backlight will return after 4 8 minute search which occurs during the late night or early morning hours The USB charging port will then resume working Temperature Trend Arrows The indoor and outdoor temperature trend indicators will update every 30 minutes or less These trends represent temperature changes over the past three hours Example At 1 00pm the arrow indicates the change in temperature since 10 00am At 1 30pm the arrow will indicate the temperature c
11. he month MONTH DATE Press the F C SET button to confirm and move to the date The Date will flash Use the or buttons to choose the date Press the F C SET button to confirm and exit So ee ee Note The day of the week will set automatically once the year month and date are set Fahrenheit Celsius F tat e From the time display mode press and release the F C SET button to switch from J Fahrenheit to Celsius en co E TEMPERATURE Alarm Time Set Time Alarm In normal mode press and release the ALARM button once to show alarm time The letters AL will show in the seconds display Hold the ALARM button for three seconds to enter alarm set mode The Hour will flash Use the or buttons to set the hour Press the ALARM button to confirm and switch to minutes The Minutes will flash Use the or buttons to set the minutes o a Press ALARM button to confirm nt be TEAL 2046 Se se a Press the F C SET button to return to normal mode Note When no buttons are pressed for ten seconds the atomic alarm clock will save the last change and default back to normal mode Activate Deactivate Time Alarm Press and release the ALARM button once to show Alarm Time e Activate With the Alarm Time showing press and release the ALARM button to activate the alarm The alarm icon amp appears when alarm is active e Deactivate With the Alarm time showing press and release the A
12. ioration of any accessory or decorative surface 4 damage resulting from failure to follow instructions contained in the owner s manual 5 damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology Ltd authorized service center 6 units used for other than home use 7 applications and uses that this product was not intended or 8 the products inability to receive a signal due to any source of interference This warranty covers only actual defects within the product itself and does not cover the cost of installation or removal from a fixed installation normal set up or adjustments claims based on misrepresentation by the seller or performance variations resulting from installation related circumstances LA CROSSE TECHNOLOGY LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION THIS PRODUCT IS NOT A TOY KEEP OUT OF CHILDREN S REACH This warranty gives you specific legal rights You may also have other rights specific to the State Some States do not allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you For warranty work technical support or information contact La Crosse Technology Ltd 2817 Losey Blvd S La Crosse WI
13. nd or check the A C adapter in the atomic alarm clock Care and Maintenance Do Not Mix Old and New Batteries Do Not Mix Alkaline Lithium Standard or Rechargeable Batteries Do not expose the atomic alarm clock to extreme temperatures vibration or shock Keep dry Clean atomic alarm clock with a soft damp cloth Do not use solvents or scouring agents The atomic alarm clock is not a toy Keep it out of reach of children e The atomic alarm clock is not to be used for medical purpose or for public information It is determined for home use only e The specifications of this atomic alarm clock may change without prior notice e Improper use or unauthorized opening of housing will void the warranty e lf the atomic alarm clock does not work properly change the batteries and or check the A C cord connection Warranty Information La Crosse Technology Ltd provides a 1 year limited warranty on this product against manufacturing defects in materials and workmanship This limited warranty begins on the original date of purchase is valid only on products purchased and used in North America and only to the original purchaser of this product To receive warranty service the purchaser must contact La Crosse Technology Ltd for problem determination and service procedures Warranty service can only be performed by a La Crosse Technology Ltd authorized service center The original dated bill of sale must be presented upon request as proof of purch
14. t hours C The WWVB reception icon with full signal strength will appear on screen if the reception of Q atomic time is successful e When powered up the atomic alarm clock will automatically try to receive the WWVB signal every three hours for example 0 00 3 00 6 00 18 00 21 00 but if at any of the above times it receives the signal it won t search again until next day at UTC 7 00 8 00 9 00 10 00 11 00 When it successfully receives a time update at UTC 7 00 8 00 9 00 10 00 or 11 00 it will not look for an update again until the next day e In normal mode push the button for three seconds to enter manual searching for the signal e In reception mode push the button for three seconds to exit searching for the atomic signal Note During WWVB reception all buttons will work When in time set or alarm set mode the WWVB search will stop When alarm rings it will stop the WWVB search IMPORTANT To limit interference the LCD backlight amp USB charging functions are suspended during WWVB atomic signal synchronization which occurs after midnight They will resume after a 4 8 minute signal search Note In case the atomic alarm clock is not able to detect the WWVB signal disturbances transmitting distance etc the time can be manually set in the program menu Function Buttons p aa ae LIGHT HI LOW OFF Ga aa Button Press and Release Functions Hold 3 seconds F C SET Move through program menu
15. ull Moon occurs when the earth moon and sun are in approximate alignment with the moon and the sun on opposite sides of the earth The illuminated portion of the moon faces the earth giving us complete visibility of one side of the entire moon After a full moon the illuminated portion will decrease or wane until the new moon occurs e First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth and sun We see half of the moon illuminated and the other half is in shadow Position the Atomic Alarm Clock The atomic alarm clock should be placed near an exterior wall with the front or back facing toward Ft Collins Colorado for best WWVB reception Choose a location 6 feet or more from electronics such as cordless phones gaming systems televisions microwaves routers baby monitors etc which can prevent signal reception Specifications Indoor Temperature Range 32 F to 122 F 0 C to 50 C Humidity Range 3 to 99 RH Power Atomic Alarm Clock 5 volt A C power adapter included Battery backup 2 AAA IEC LR3 batteries included USB Charge Port Output 0 5 amp charging cable not included Battery Life Atomic Alarm Clock Battery Backup Battery life is over 24 months when using the AC adapter for primary power Dimensions Atomic Alarm Clock 5 56 Lx 2 D x 3 33 H 141 22 x 50 8 x 86 36 mm Low Battery Icon e When this low battery icon amp appears replace the batteries a
Download Pdf Manuals
Related Search