MP4 User Manual
Contents
1. maximum support card of 32GB the recorded document format is AVI Resolution 1s 320x240 Insert SD card at receiving end TF card at transmitting end then press REC button to enter recording state screen at the receiving end will display REC the recording light at transmitting end will turn on Then press REC button to exit the recording mode To protect the stored material from damage please use regular SD card and TF card make sure to withdraw card after exiting recording state IV The Video Signal Connected to Displayer First connect A V wire to the displayer insert the yellow and the white respectively into video and audio output ports of receiver connect the other end to input port of the displayer set the displayer at AV mode the displaying screen will display the video signals V USB Playback First insert SD card with recorded documents into SD card slot in the receiver then enter the main menu to select USB menu press or lt button respectively to set YES mode make USB at connecting mode connect the receiver to PC 6 then on the PC will display removable disk Click to browse the recorded documents Random accessories 1 Wireless recordable digital receiver 1 set 2 Power adapter SV 1A 1 piece 3 A V output cable the red inserting audio the yellow inserting video 1 piece 4 Earphone cord 1 piece 5 Digital transmitter 1 set 6 USB cable 2 piece 7 Manual 1 piece 8 Lithium battery 3 7V 132. 00mA 1 piece
3. Description 1 On Off button 2 Menu button 3 Recording button 4 Taking button 5 Speaker 6 Charge indicator light 7 Operating indicator light 8 Microphone 9 Audio output 10 Video output 11 USB plug seat 12 Reset hole 13 Battery compartment 14 SD card seat OYOQ O Om OIO 3 1 Microphone 2 Infrared indicator light 3 Lens 4 Charging indicator light 5 Recording indicator light 6 Power indicator light 7 ON OFF 8 Antenna 9 Recording button 10 Code matching button 11 USB 12 TF card seat 13 Speaker hole Using Method Recording files please began to video in the transmitter and receiver online System Startup finished a minute later after quited from recording status and saved the file must to wait a minute before record the next file or else it may lead to file missing I Switching ON OFF 1 Connected to the power adapter Please use the power adapter provided by the factory When using for the first time please charge without stop for more than five hours Please use power adapter with the original configuration by the manufacturer for charging using power of different specification may cause harm to the machine and even human body When inserting power adapter into the machine for charging red indicator light turns on when red indicator light continuously flashes it indicates that the battery is fully charged the machine can be charged during playing and fully charged battery
4. Using Manual 2 4G Wireless Digital Monitoring System Thank you very much for purchasing this wireless digital recordable receiver Before using this product please carefully read the using manual which will make you fully aware of the various functions of the machine for your use Points for Attention Do not repair this machine by yourself Avoid boiled water or dust Do not wash this machine with thinner or other chemical washing agents Only specified power adapter shall be used Please do not use other power for fear of serious damage to this product Switch off the power when the product is unoccupied Product Features High accepting sensitivity strong anti interference ability and good transmission confidentiality Adopting FSK modulation Signal carrier frequency 2 400 2 483 GHz Data transfer rate 256Kbps Output power gt 16dbmW barrier free transmission distance on sea surface is greater than 300 m Data buffer and burst data transmission displaying of signal quality Supporting infrared night vision function Supporting temperature sensing function Powerful digital features you can use microcontroller for high performance RF system Resolution 320 x 240 recording file 450MBT per hour 2 5 TFT display Built in lithium battery fully charged machine can last 3H AVI Supporting video recording in AVI format Main Technical Parameters Functional
5. can last for about 3 hours Note lithium batteries shall be used the battery generally can not be replaced by that made of different material 2 Switching ON Press and hold the power switch to the power ON state the green power indicator light turns on Screen turns on in about 6 seconds When the machine refuses to turn on while pressing ON button for several times it may be because the power has run out please insert dedicated power adaptor for charging 3 Fast Resetting Mode Ifthe machine is halted due to suspension please first press machine resetting button and press ON button for restarting IT Menu Operation 1 Press machine power ON OFF button to start the machine press MENU button to enter the main menu press A or V button respectively to enter Volume Brightness Contrast TV Format Temperature Night Vision Sleep Time PAIR USB Date and Time and My File menus press MENU button to enter the selected mode 2 Code Matching Only after the transmitting end and the receiving end match code and are locked communication is available Methods of operation Operation method of transmitting end first press and hold code matching button at the transmitting end then press power ON button at transmitting end to start the machine release the code matching button in 5 seconds 2 Operation method of receiving end first start the machine then press Menu V Pair yes after code matching is successful re
6. ceive and transmit to communicate 3 Volume Adjustment Press MENU button select Volume menu press or lt button to adjust volume press lt 4 reduce value press to increase volume 4 Brightness Adjustment Press MENU button press V or A button to select Brightness menu press or lt button to increase or reduce brightness 5 Adjustment of Contrast Gradient Press MENU button press V or A button to select Contrast menu press or lt button to increase or reduce the contrast gradient 6 Selection of Standard Press MENU button press V or A button to select TV Format menu press or lt button to select PAL or NTSC standard 7 Display of Ambient Temperature at Transmitting End Press MENU button press V or A button to select Temperature menu press or lt button to select OFF not displaying temperature ON displaying temperature 8 Switching ON OFF of Night Vision Light at Transmitting End Press MENU button press V or A button to select Night Vision press or lt button to select OFF switch off night vision function NO switch on night vision function 9 Setting of Sleeping Time on Displaying Screen of Receiver Press MENU button press V or A button to select Sleep Time menu press or lt button respectively to set off for switching OFF 1 minute 3 minutes 5 minutes 10 minutes 30 minutes 10 Setting of Code Matching Press MENU button press V or A button to select Pair menu press or lt button r
7. espectively to set no for switching OFF yes setting code matching 11 USB Setting Press MENU button press V or A button to select USB menu press or lt button to select YES and NO set USB port to connect or disconnect with PC machine Only when inserting SD card into receiver this function is valid 12 Time Setting Press MENU button press V or A button to select Date and Time menu then press gt lt button or A V button to respectively set day month year hour and minute After setting time at the receiving end press MODE button to transmit the set time state to the transmitting end to adjust time at transmitting end thus making times at transmitting end and receiving end synchronized 13 Setting of Document Operation Press MENU button press V or A button to select My File menu press A or V button respectively to select document press MENU button to read document or pause reading document press lt button to return document press button to delect document 14 Press MODE button there is icon for microphone on the screen which can transmit the received microphone signal to the transmitting end At the same time the transmitting end stops transmitting sound Press MODE button again the microphone icon on the screen will disappear thus recovering transmitting of sound from transmitting end to receiving end III Recorded Document Insert SD card into the SD card seat TF card into TF seat at transmitting end
Download Pdf Manuals
Related Search