with Smart TM Version 3.0 User Manual
Contents
1. The following accessories are available for your iCN External Antenna Required for vehicles with heated windshields and to boost GPS performance in weak signal areas Memory Card Writer Connects to your computer and allows you to download maps to SD or MMC memory cards Remote Control Button functions are the same as the ICN control buttons You cannot turn on the iCN using the Remote Control Only included with the iCN 635 and 650 Available for the iCN 610 as an accessory 38 CN 600 series User Manual software Product License NAVMAN THE LICENSOR IS WILLING TO LICENSE THE iCN SmartST SOFTWARE THE SOFTWARE TO YOU THE CUSTOMER ONLY IF YOU ACCEPT ALL THE TERMS OF THIS LICENCE PLEASE READ THE TERMS CAREFULLY BECAUSE USING THIS SOFTWARE WILL BE DEEMED TO BE YOUR ACCEPTANCE THAT YOU ARE USING IT ON THE FOLLOWING TERMS IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE DO NOT INSTALL OR USE THE SOFTWARE AND RETURN THIS PRODUCT PROMPTLY INCLUDING ALL PACKAGING AND WRITTEN MATERIALS TO THE LICENSOR S REPRESENTATIVE AND ANY AMOUNT YOU MAY HAVE PAID WILL BE REFUNDED LESS DELIVERY AND HANDLING CHARGES 1 The Licensor grants to the Customer a non exclusive non transferable licence to use a one copy of the Software on one of the Customer s handheld devices and b the accompanying materials including any manuals contained in the Software the Materials in accordance with the terms and conditions of this Lice2. Basemaps CH 233 2MB Available 3 Europe Basemap 3 Europe Basemap V3 World Outline 38 1MB Required CH SD D Not Available esch PC Removable Media Progress SES 4 Click the appropriate Add button to install the Basemap to the iCN memory card or memory card reader fin v Not Available Activate Basemap 1 On your iCN from the Main Menu tap the Settings option 2 From the Settings screen tap Maps 3 Complete one of the following e To activate a Basemap on the iCN from the Maps screen tap Internal Maps The Settings Maps Internal screen will display e To activate a Basemap on the memory card from the Maps screen tao Memory Card Maps option The Settings Maps Memory Card screen will display 5 Select the Basemap you require 6 Press ESC repeatedly until the Map screen displays e Tap Yes to accept the Warning dialog box 33 CN 600 series User Manual Remove Basemap 1 O A O N Connect the ICN to your computer e Connect the iCN to mains power supply using the adapter provided e Connect the USB cable to the iCN and to your computer USB port e Turn on the CN by pressing the Menu Power button The CN USB Connection screen will display when you are connected Open SmartST Desktop if it is not already open Start gt Programs gt Navman gt SmartST Desktop On the Map menu click Basemaps The Navman Basemap Utility window will open Select the Basemap to re
3. To select a Town press OK Select a city or town Press OK To select a Road press OK Select a road Press OK Press the Page button to display the Adaress Details screen Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen To the Intersection of Two Streets Ty 7A From the Main Menu select the Destination option From the Destination screen select the Intersection option The Destination Intersection screen will display Destination Intersection MILL LANE MACCLESF CROSS STREET MACL va 3 Select a Country using the 8 way toggle press OK 4 To select a Region or State press OK Select a region Press OK 12 CN 600 series User Manual 5 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 6 To select a City Town press OK Select a city or town Press OK 7 To select the first intersecting street press OK A list of intersecting streets will display Select a street Press OK or J Select And A list of intersecting streets will display Select a street Press OK Press the Page button the ntersection Details screen will display 10 Choose one of the following options e Add to Trip Opens the Trip
4. Deleting All Avoid Areas 1 From the Main Menu select the Settings option 2 From the Settings screen select the My Data option 3 From the My Data screen select the Clear Data option The Settings Clear Data screen will display 4 Use the 8 way toggle to select the Clear Avoid Areas button e Select Yes and press OK to accept the Warning dialog box D Press ESC repeatedly until the Map screen displays 17 CN 600 series User Manual 11 Viewing Your Route Once a route has been calculated there are a number of ways to view it Cycle through the screens by pressing the Page button Io cancel a route or stop the Route Demonstrator return to the Main Menu select the Route Information option then the Cancel Route option Back On Track Automatic Rerouting Your route is re directed if you make a wrong turn The symbol will display upper left of the SD Map and Next Instruction screens while the route re calculates Automatic rerouting is enabled on the Routing screen Map Screen This screen displays north with your current position and surrounding street names If a route has been calculated the route and turns are highlighted From the Main Menu select the Map option e Zoom using and on the Zoom Brightness button e Press OK to display the cross hair Press again to display the Pop up menu Your current position is marked with A Your next turn is high lighted in a different color to future turns The
5. ME 9 gt gt D3 Component Description Speaker Outputs voice commands and warnings Use Volume button to adjust Memory Card Slot Slot for memory card Insert card with label facing the front of the ICN GPS Receiver Receives signals from GPS satellites when lifted out to the horizontal position Car Antenna Socket Connection socket for GPS car antenna not included Power Socket Connection socket for power cable O USB Socket Connection socket for USB cable to your computer Remote Control Button functions are the same as the iCN control buttons You cannot turn on the CN using the Remote Control Only included with the iCN 635 and 650 Available for the ICN 610 as an accessory CN 600 series User Manual 3 Memory Card ICN 610 and 635 Your ICN comes with a memory card contaning a preactivated map To navigate to your destination you will first need to insert the memory card into your CN To navigate in an area outside of the preactivated map you must first purchase a Map Product Key from your Navman supplier Install SmartST Desktop then use it to activate your Map Product Key and install the required map See Installing Maps Using SmartST Desktop on page 30 If you purchased your CN 635 in New Zealand you will not receive a memory card as the preactivated map of New Zealand is contained in internal memory Inserting Memory Card Note The first time you insert the m
6. BIRKENHEAD 3 Select a destination from the list press OK 4 Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen CN 600 series User Manual Multiple Destination Points with the Trio Planner You can use the Trip Planner to set multiple destination points for your trip Your route will be calculated to go via each of these points in the specified order Destination points can be added via the Trip Planner screen or by selecting Show Details from the pop up menu on the Map screen then Add to Trip 1 From the Main Menu select the Trip Planner option The Trip Planner screen will display Trip Planner OCEAN VIEW RD AARON CRT UNDERWOOD RD 2 Select Add and press OK The Destination screen will open 3 Select Address and press OK The Destination Address screen will open Note You can also add destination points using intersections Cities Towns Points of Interest and recent destinations 4 Select a Country using the 8 way toggle press OK 5 To select a Region or State press OK Select a region Press OK 6 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 7 To select a Town press OK Select a city or town Press OK 8 To select a Road p
7. Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen To a City or Town Centre 1 Ss SE ER From the Main Menu select the Destination option From the Destination screen select the City Town Centre option The Destination City Town Center screen will display Destination City Town Centre UNITED KINGDOM gt ENGLAND ANY POSTCODE MAGNA PARK BITTES Select a Country using the 8 way toggle press OK To select a Region or State press OK Select a region Press OK To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK To select a City Town press OK Select a city or town Press OK Press the Page button to display the Address Details screen Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen 13 CN 600 series User Manual To a Point Of Interest PO A POI is a named site feature landmark or public venue POI s are stored in Categories such as parks and museums POI s can be displayed as icons on a map 1 From the Main Menu select the Destinati
8. To conserve space on your iCN and memory card you can choose map layers to install The layers you can choose from are e Points of Interest POIs e Water parks e Land contours topography To access the Map Layers section Desktop tab gt Settings gt Layers DS Iw POIs Select or clear each checkbox to indicate the layers to install for each map E Roa Iw Water Parks etc Iw Land Contours 35 CN 600 series User Manual Points of Interest POI Editor You can add custom Points of Interest POIs using the POI Editor A maximum of 25 Custom POls can be saved on your CN The Custom POI files are listed on the My POI screen Custom POIs can be set to announce when in close proximity at the Select Active POI screen Step 1 Create a Custom POI File 1 Create a New POI File e On the Map menu click POIs The POI Editor window will open e On the File menu of the POI Editor click New Text File The POI File Name window will open e Type a name for the file in the File Name box and click OK The file name can be up to eight characters with no spaces 2 Add a PO to the POI File e On the Edit menu click New The PO Details window will open e Type a description for the POI in the Description box POI Details e On the Degrees Minutes Seconds tab type or select i Description EES Be ees minute and second of the POI latitude in the ee Seed Latitude D S 0 si NCS e On the Degrees Minutes Seconds tab typ
9. Use this guide to learn how to operate it effectively and safely plus find out all of the different features available to you GPS and GPS Signals The Global Positioning System GPS is a network of satellites that transmit accurate time and position information worldwide GPS receivers receive signals from these satellites and use the information to determine an exact location Satellites orbit the Earth at around 12 000 miles While a GPS receiver can detect signals from up to 12 satellites at anytime only three are needed to provide a position or fix latitude and longitude for vehicle navigation systems The iCN GPS antenna receives GPS signals To receive GPS signals ensure the ICN is outdoors or in a vehicle outdoors and the GPS antenna has an unobstructed view of the sky The iCN can operate in all weather types except snowfall Safety Notice In a vehicle it is your sole responsibility to place secure and use the iCN in a manner that will not cause accidents personal injury or property damage The user of this product is solely responsible for observing safe driving practices It is your sole responsibility that the vehicle mount installation instructions are read carefully understood and used consistent with the laws of operation for each country in which the device is used It is your sole responsibility to adhere to the following safety instructions at all times e Do not operate the iCN while driving or place the iCN
10. a warning message at the start of your trip if your route will include these areas Io enable Back on Track automatic rerouting select the Automatic Rerouting check box Automatic rerouting will update the calculated route if you take a wrong turn 10 Press the Page button 11 To enable the Route Demonstrator allowing you to plan and view a route without a GPS fix select the Demonstrate Route check box 12 To enable the route demonstrator to be repeatedly played select the Repeat check box 13 To enable the SmartST demonstration to be played select the SmartST Demonstration check box The demonstration will navigate between the first and second Favorite after a ten second delay 14 To enable GPS datalogging select Track Recording The Data Logging Enabled screen will display Note A memory card is required for datalogging e Select the Name of log file box and press OK The Enter Text screen will display 20 CN 600 series User Manual e Press and hold the ESC button to clear the text box if required e Enter a name for the log file e Select Enter and press OK The Data Logging Enabled screen will display e Select Yes and press OK The Routing screen will display 15 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Language Settings 1 From the Main Menu select the Settings option 2 From the Settings screen
11. begin check if your vehicle is fitted with a heat reflecting or heated windshield If so you will need to purchase an external antenna for your CN to receive GPS signals There are a number of ways to position an iCN in a vehicle Follow these instructions carefully e For security and to avoid overheating do not leave your CN in an unattended vehicle especially in strong sunlight e Do not use or handle the iCN when it is hot leave it to cool out of direct sunlight If your ICN is too hot you will be prompted to turn down the brightness press and hold the Zoom button If the ICN continues to get hotter the screen will go blank however voice instructions will continue suction Mount 1 Slip the locking nut over the ball foot 2 Snap the socket clip onto the ball foot and tighten the locking nut onto the thread of the socket clip 3 Clean and dry the surfaces hold the suction cup firmly against the glass and press down the lever 4 Position the two locating slots on the underside of the ICN into the tabs on the socket clip Push the iCN into the Clip 5 Open the antenna outwards so it has a clear view of the sky 6 Plug the power adapter into the socket on the left of the ICN and the other end into the vehicle lighter socket CN 600 series User Manual Adhesive Tape and Screw Mount You can use the base plate adhesive tape and screws supplied to mount the ICN directly into the vehicle dashboard Note This is a perma
12. indicate whether they are Selected maps e Selected e Installed e Available on CD e Available from Navman or e Not available Download selected maps to the iCN memory card or memory card writer Information about the map 30 CN 600 series User Manual 17 Updating your ICN Updating from Previous Version of SmartST If a software update is available for your ICN you will be prompted when you open SmartST Desktop 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 Follow the prompts to update your CN software to the latest version of SmartST Updating your Version of SmartST It is recommended that you regularly check the Navman website for software updates to the version of SmartST you are using 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 On the Setup menu select Update software then Check for updates on the web Your computer will connect to the Internet and display the Navman website 3 Download the update for your region to your computer if available 4 On the Setup menu select Update software then Update software on iCN Follow the prompts to update your ICN software 31 CN 600 series User Manual 18 Installing Maps Using SmartST Desktop Your CN comes with a pre activated map If you require an additional map you must first purchase a Map Product Key from your Navman supplier Use SmartST Desktop to activate your
13. the intersection of the cross hair on a destination using the 8 way toggle Where the cross hair intersect on a street the street name will display on the Map screen 4 Press OK to select the street as your destination The Pop up menu will display Deletes an Avoid Area if enabled Displays the Destination POI screen Page displays the Select nearest POI screen or further screens if available 6 Press OK to confirm your selection ICN 635 650 only Defines an area on the map that is avoided during your journey 21 CN 600 series User Manual 13 Route Demonstrator The Route Demonstrator allows you to e Preview a route or e Plan and view a route without a GPS fix such as when you are inside a building step 1 Activate Route Demonstrator 1 From the Main Menu select the Settings option 2 From the Settings screen select the Routes option The Routing screen will display 3 Press the Page button twice 4 Select the Demonstrate Route check box press OK D Press ESC repeatedly until the Map screen displays e Press OK to accept the Warning dialog box step 2 Select Departure Point If you have a GPS fix you do not need to select a departure point unless the demonstrated route is to start eleswhere 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over a departure point using the 8 way toggle 3 Press OK to display the Pop up men
14. 1 From the Main Menu select the Favorites option The Shortcuts screen will display 2 Select from the list and press OK The Edit Shortcut screen will display 3 Select one of the following options and press OK e Save Saves the destination as a Shortcut e Delete Deletes the selected input e Show Displays the address on the Map screen e Go Calculates the route and displays it on the 3D Map screen e Add to Trip Opens the Trip Planner screen from where you can add the destination to your trip Using Favorites 1 From the Main Menu screen select the Favorites option e f you have saved a Shortcut the Shortcuts screen will display Press the Page button to display the Favorite screen 2 Select from the list and press OK The Edit Favorite screen will display 3 Select one of the following options and press OK e Save Saves the destination as a Shortcut e Delete Deletes the selected input e Show Displays the address on the Map screen e Go Calculates the route and displays it on the 3D Map screen e Add to Trip Opens the Trip Planner screen from where you can add the destination to your trip 24 19 iCN 600 series User Manual settings You can modify the following settings to suit your preferences screen Brightness 1 Press and hold the Zoom Brightness button to display the brightness indicator bar 2 Press or on the Zoom Brightness button to adjust the brightness The ICN can heat up when di
15. BMP graphic with a minimum of 6x6 pixels and a maximum of 32x32 pixels 3 Click OK and follow the prompts The POI file is saved to the iCN e f you want to change the name of the file edit the name for the file in the File Name box of the PO File Name window and click OK The file name can be up to eight characters with no spaces Deleting a Custom POI File from your iCN 1 On the Device menu click Manage POI Files The Manage PO Files window will open displaying a list of custom POI files installed on your CN 2 Click the File Name or Size of the POI file to delete 3 Click Delete The file is removed from the list but is not yet deleted 4 If you want to delete more than one file go to step 2 5 Click OK and accept the changes The selected file or files are deleted 36 CN 600 series User Manual Backups You can save backups of your settings Shortcuts and Favorites to your computer To Back up your Settings Shortcuts and Favorites 1 From the File menu click Backup The Backup window will display 2 Click New Backup The New Backup window will display 3 Click OK To Delete a Backup 1 From the File menu click Backup The Backup window will display 2 Select the backup from the list 3 Click Delete To Restore a Backup 1 From the File menu click Restore The Restore window will display 2 Select the backup from the list 3 Click Restore 3 CN 600 series User Manual 21 Accessories
16. Europe Australia New Zealand Edition y A i A y S Geng i T i U d ee d mm i ei i pE i i N F e a W Vg gt We 4 k f i W 7 4 WW i PR T Ea 7 i K N Ai Y ea 5 E k L N A A y d N N ON E y N V N B E WT A d 4 N A S di ee pg with OMartST Version 3 0 User Manual CN 600 series User Manual Contents EENEG 3 PE ae E 4 3 Memory Car 6 A TURING your ICN ORANG EE T Ox FO lee Bin ECK EE 8 6 Main Menu Green 10 7 Screen kovioar 10 eMC goes i e A E E EET 11 9 Setting your Ueetnoton 12 10 Avoiding AN Area 17 TIe Viewng YOUN EE seed 18 12 Map Screen Pop up Mem 21 Toe EELER 22 14 Favorites EE 23 tele GE Zo TO OAL Sh IDC S OD EE 30 17 Updating your CN 3l 18 Installing Maps Using SmartST Desktop 0 32 19 Continuous Continental Navigation os 20 SmartST Desktop Advanced Features 35 2T FAC GS 5 SIGS EE 38 CN 600 series User Manual 1 Introduction Whether you travel in your own country or overseas the ICN will direct you to your destination without the need for map books and second hand instructions The Global Positioning System is available free of charge at any time and is accurate to within 5 m 15 ft Your Ch map provides street level detail for door to door navigation including Points Of Interest POIs such as accomodation railway stations and airports
17. Map Product Key and install the required map Install and Activate Maps on your ICN 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 Insert a SmartST Map CD into your Computer CD ROM drive the available maps will display 3 Click the map you want to install to your ICN Maps are of population areas and not of political areas such as counties or states You may need to install multiple maps to cover the desired geographical area e f you have already activated a Map Product Key or your ICN came with a pre activated Map Product Key the map will change colour to indicate it has been selected Go to step 6 4 Follow the prompts to activate the Map Product Key e Enter your Map Product Key e Your Computer will connect to the Internet and activate your Map Product Key e You will be prompted to enter or update your contact details so Navman can advise you when updates are released 5 Select a map to install Maps are listed in the Selected section of the Desktop Selected Maps tab e f you have another Map Product Key to activate go to step 3 6 Click an Add to button to install all maps listed in the Selected section of the Desktop Selected Maps tab to your iCN memory card or PC writer Remove Maps from your CN 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 Open the Maps on ICN section CN tab gt Maps on ON 3 Click the map to be removed and select Remove from
18. available The satellites available from your Current position are shown as bars e Grey no signal at all e Red this signal is not being used to fix your position e Green this signal is being used to fix your position Satellite Position Indicators Satellite analysis From the Satellite Signal Strengths screen press the Page button to display the Satellite analysis screen The position of each satellite is shown in relation to Earth You can view the status and performance of a satellite by selecting it using the 8 way toggle The satellite performance will display Each satellite is represented by a small empty circle e Grey circle no signal e Red circle asignal not being used to fix your position e Green circle a signal being used to fix your position e Yellow satellite icon shows the current satellite 11 CN 600 series User Manual 9 Setting your Destination Before you travel you must select a destination To a Street Address 1 2 OMON O o S Co From the Main Menu select the Destination option From the Destination screen select the Address option The Destination Adaress screen will display Destination Address E LANY REGION LANY POSTCODE LANY TOWN Select a Country using the 8 way toggle press OK To select a Region or State press OK Select a region Press OK To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK
19. color will depend on the theme you are using GPS strength indicator Your current location 3D Map Screen icn 635 650 only Your route displays on a map oriented to the travelling direction with an adjustable horizon 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button to display the 3D Map screen e Zoom using and on the Zoom Brightness button e Use the 8 way toggle up or down to adjust the viewing angle e Press OK to display the Destination Pop up menu LEFT JELLICOE ST North oriented compass Zeg Se Additional information can display here AKT AYE Press the 8 way toggle left or right to scroll the options You must have a route calculated to view these options a MANGERE RD e Current speed e Current time e Current bearing heading HDG e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG GPS strength indicator Your current location 18 CN 600 series User Manual Next Turn Screen Displays the turn direction street name and the distance to the next turn A route must have been calculated for this screen to display Access to this screen is set on the Settings Display screen 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button until the Next Turn screen displays The next instruction Map of the next turn Directio
20. direct or consequential loss or damage including any loss of profits however caused arising in connection with the use of or inability to use the Software If any limitation or exclusion or liability contained in this Licence is held to be invalid for any reason and the Licensor becomes liable for loss or damage that would otherwise have been excluded that liability will be limited to the total amount actually paid by the Customer for the Software 7 The Licensor may terminate this Licence immediately if the Customer breaches any of its obligations under this Licence Immediately following termination of this Licence the Customer must deliver to the Licensor s Representative or destroy all copies of the Software and Materials in whatever form possessed by the Customer Limited Warranty Agreement IMPORTANT The following terms and conditions may vary from country to country Hardware Product Navman warrants its products to be free from defects in materials or workmanship under normal use for one year from the date of purchase the Warranty Period to the original owner You To claim under this warranty You must return the product to the place of purchase or a service centre approved by Navman Service Centre You must produce an original sales receipt as proof of purchase You will be solely responsible for all shipping charges freight insurance and proper packaging to prevent breakage in transit Navman will at its discretion repai
21. e or select Longtude 1 a fb wp a ECW the degree minute and second of the POI longitude in the Longitude boxes 3 Repeat step 2 until all POIs have been added to the POI file OK Cancel 4 On the File menu click Save The POI file is saved Step 2 Save Custom POI File to your iCN 1 On the File menu click Save to Device The PO Options window will open 2 Modify the POI settings as required i Active Vv e To activate the POI select the Active check box If you do RS ae not activate the POI you will only be able to configure the i SEO Ges Importance and Icon File settings Distance o 3 o 2000m e To enable a visual warning when the POI is in close proximity 9 select the Visual Alert check box oe Icon File e To enable an audible chime when the POI is in close proximity Defaut o cancel select the Audio Alert check box e To change the units used to measure distance for this POI select the Metric or Imperial option e Select the distance from the POI at which the visual warning should display or the audible chime is heard from the Distance box e Move the POI Visibility Level slider left or right indicate the priority that the POI has where two or more POls are in the same locale e ype the path to the icon file to be used to represent the POI in the Icon File box or select the icon file from your local or network drive clicking L J locating the file and clicking Open The file must be a bitmap
22. eck box 6 To display the Tutorial select the Show Tutorial option and press OK SS e The Tutorial will display Press the Page button to move through the screens 7 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box 29 CN 600 series User Manual 16 SmartSI Desktop SmartST Desktop is used to download maps to your iCn obtain software updates manage Custom Points of Interest POIs and install Basemaps Note For Windows XP install XP Service Pack 1 before you install SmartST Desktop Install SmartST Desktop on your Computer 1 Close all open programs on your Computer 2 Insert the SmartST CD into your computer CD ROM drive The SmartST Desktop installer will start e f your computer does not automatically launch the CD start the installation manually Start gt Run Type d setup6xx_3 exe where d is the letter assigned to your CD ROM drive Click OK 3 Follow the screen prompts to install SmartST Desktop e Select your preferred language for SmartST Desktop when prompted e Review and accept the License Agreement when prompted e Select a destination folder when prompted SmartST Desktop will open You are now ready to install maps on your iCN To Open SmartST Desktop Once SmartST Desktop has been installed you can access it from the Start menu Start gt Programs gt Navman gt SmartST Desktop Maps are colored to
23. ecting the Do not show on startup check box Press OK to confirm 3 Press the Page button 4 The Warning screen will display Read the warning mesage and press OK to confirm that you understand D The Tutorial will display Press the Page button to move through the screens e You can turn off the Tutorial on startup by using the 8 way toggle to highlight the Do not show Tutorial on Startup check box press OK to confirm 6 The Main Menu screen will display Main Menu Favourites Trip Planner 7 Use the 8 way toggle to highlight Main Menu options confirm a selection by pressing OK e Return to the Main Menu at any time by pressing the MENU Power button 7 Screen Keyboard The screen keyboard will display when required to enter text such as when entering a street name 1 Use the 8 way toggle to move around the keyboard Select Road 1 4 of 85 e Press OK to select a character olwkairlrleliuirioledzleoia S F J L a e Press ESC to delete a character Hold ESC to delete the line STAC COCA Ca e Press Zoom up to display the Alternative keyboard ONR E a e Press Zoom down to return to the Alphabetical keyboard LAKE AYENUE BURY ST EDMUNDS ST EDMU LAKE AYENUE CLACTON ON SEA TENDRING LAKE AVENUE HEANOR HEANOR AND LOSCO LAKE AYENUE KETTERING NORTHAMPTONSHLI e The list will reduce to match your search criteria Press Page to see more of the list 2 Use the 8 way toggle to select a search
24. emory card you will first need to remove the plastic space saver from the SD MMC slot To insert the memory card first ensure that the ICN is turned off then gently insert the card in the Memory Card slot with the label facing the front of the ICN Removing Memory Card To remove the memory card first ensure that the iCN is turned off then gently push the top edge of the card to release it and pull it out of the slot ICN 650 The iCN 650 contains all preactivated maps for West Europe or US Canada in internal memory and does not come with a memory card CN 600 series User Manual 4 Turning your CN On and Off Use the Menu Power button to turn your iCN on and off Turn ICN On 1 Plug the power adapter into the socket on the left of the ICN and the other end into the vehicle lighter socket 2 Gently pull the bottom of the GPS receiver away from the iCN The receiver will lift out to a horizontal position to allow it to obtain a GPS fix 3 Press the Menu Power button for one second Turn CN Off 1 Gently push the GPS receiver back towards the iCN The receiver will click in to place 2 Complete one of the following e CN 610 650 Press the Menu Power button for three seconds When the confirmation message displays select Yes and press OK The iCN will turn off e iCN 635 Press the Menu Power button for three seconds until the iCN turns off CN 600 series User Manual 5 Position in a Vehicle Before you
25. en select the Speed option The Settings Soeed screen will display 4 lo enable an audible warning when travelling over a specified speed select the soeed over which the warning is to sound from the Speed box using the 8 way toggle Note The GPS signal alert will be active when a Speed alert is selected D Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Operation Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts screen select the Operating option The Operating screen will display 4 To enable a warning dialog box to be displayed for the driver when a button is pressed while driving select the Warn driver when operating check box 5 To enable an audible and visual alert when the GPS signal is lost select the Warn when GPS lost check box Note The GPS signal alert will be active when a Speed alert is selected 28 CN 600 series User Manual 6 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Clear Data Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the My Data option 3 From the My Data screen select the Clear Data option The Settings Clear Data screen will display 4 To delete Recent destinations Favorit
26. es Shortcuts or Avoid Areas scroll to the appropriate option and press OK e Select Yes and press OK to accept the Warning dialog box D Press ESC repeatedly until the Map screen displays Measurement Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the More Settings option 3 From the General screen select the Measurements option The Measurements screen will display 4 Select either the Decimal Degrees or Degrees Minutes Seconds option to indicate the position format to be used Ol To set the time select the offset from Coordinated Universal Time UTC for your location from the Local Time Offset box using the 8 way toggle 6 Select either the 12 Hour or 24 Hour option to indicate the time format to be used 7 Select either the kilometres or miles option to indicate the distance units to be used 8 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box otart Up and Tutorial Settings From the Main Menu select the Settings option ch 2 From the Settings screen select the More Settings option 3 From the General screen select the Startup option The Startup screen will display A To display the Tutorial on startup select the Tutorial Screen check Startup Dox a Show at Startup 5 To display the Language Selection screen on startup select the Language Selection Screen ch
27. he New Favorite screen will display 10 Select the Save As box and use the 8 way toggle to save as a Favorite or Shortcut 11 Select Save and press OK to return to the Map screen Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list 23 CN 600 series User Manual Editing Favorites and Shortcuts Edit the name of the Favorite or Shortcut or save a Favorite as a Shortcut 1 From the Main Menu screen select the Favorites option e f you have saved a Shortcut the Shortcuts screen will display To edit a Favorite press the Page button to display the Favorite screen NO Select from the list press OK The Edit Shortcut or Edit Favorite screen will display Ge Select the Name box and press OK The Enter Name screen will display Edit Favourite e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK The New Favorite screen will display 4 To save a Favorite as a Shortcut use the 8 way toggle in the Save As box to select a Shortcut position amp Shortcut 3 gt save delete L show co 5 Select Save press OK Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list Using Shortcuts
28. iCN from the pop up menu 32 CN 600 series User Manual 19 Continuous Continental Navigation You can seamlessly navigate between installed maps without the need for installing all maps en route This is achieved by using a Basemap A Basemap is a map of a large area such as West Europe or the United States containing main roads that connect cities and towns You can select a road or POI on the Basemap as your start point or destination Basemaps e contain roads and ferry connections of high national and international importance e use less memory than would be necessary to install all equivalent detailed maps e do not include smaller roads and have a reduced level of geographical detail You can add and remove basemaps using the Basemap Installer CN 635 has basemap preinstalled iCN 650 does not require basemap as all detailed maps preinstalled Navigating in Australia or New Zealand does not require a Basemap Install Basemap 1 Connect the iCN to your computer e Connect the iCN to mains power supply using the adapter provided e Connect the USB cable to the ICN and to your computer USB port e Turn on the iCN by pressing the Menu Power button The iCN USB Connection screen will display when you are connected 2 Open SmartST Desktop if it is not already open Start gt Programs gt Navman gt SmartST Desktop 3 On the Map menu click Basemaps The Navman Basemap Utility window will open Navman Basemap Installer
29. in a position that obstructs the driver s view e Do not mount in a way that interferes with airoags or other safety equipment e Do not leave in view while your vehicle is unattended especially in strong sunlight e Do not use or handle the iCN when it is hot leave it to cool out of direct sunlight Navman disclaim all liability for use of this product in a way that may cause accidents damage or may violate law CN 600 series User Manual 2 ICN Features It is recommended that you familiarize yourself with the basic operations of your CN such as using the 8 way toggle and volume control Front Components Component Description CU screen Displays maps and menu options OK Select the highlighted menu option text or command Zoom Brightness Change the amount of map area shown or press and hold to adjust the screen brightness Cancels an action deletes the last text character returns to the previous sc screen or Map Hold down to delete a line of text 8 way Toggle Use to scroll up down and move round a map to select a destination Pade Change map views including 3D Map view Use to view further screens if 9 available Jaume Press to hear the very next instruction or hold down to adjust the voice guidance volume Menu Power Press to return to the Main Menu or hold down to turn on off ICN 630 635 650 only CN 600 series User Manual Back Components
30. ing dialog box Points Of Interest POIs Settings Points Of Interest POls in a region are grouped into Categories This function allows you to select the categories you need For example you may be interested in entertainment venues only and want to disable other POI categories such as schools 1 From the Main Menu select the Settings option Paints of Interest Display Categories 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Points of Interest option The Points of Interest screen will display 4 To display POI icons on the Map and 3D Map screens select the Show Icons on Map check box 5 Use the 8 way toggle to scroll to the category or categories you require Press OK el w el el wl el el m L I Ci t e Press the Page button to view additional categories 6 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box My Points of Interest POI Settings Custom Points Of Interest POIs are installed from the SmartST Desktop POI Editor and listed on the My POIs screen 1 From the Main Menu select the Settings option 2 From the Settings screen select the My Data option 3 From the My Data screen select the My POI option The My PO screen will display 4 Use the 8 way toggle to scroll to the POI file or files you require Press OK St CN 600 series U
31. move Click the appropriate Remove button to remove the Basemap from your CN memory card or memory card reader 34 CN 600 series User Manual 20 SmartS I Desktop Advanced Features Find a City Or Town ee partial match ok erl To search for a City or Town to verify the map to be installed lEccles England United Kingdom 1 From the Map menu click Find City The Find City window will open Eching Bayern Germany Echt Limburg Netherlands Echternach Echternach Luxembourg 2 Type the name of the City or Town in the City Name field The list of available fleckental Bayern Germany Cities will reduce to match your search Eckernf rde Schleswig Holstein Germany Ecublens Yaud Switzerland 3 Double click the name of the City or Town The Desktop Map will rotate to center on the selected City or Town Map Colors and Textures To access the Desktop Colors section Desktop tab gt Settings gt Colors Adjust the settings to change the look of the map type Color Settings ap on CH e Controls map colors Displays the e map border color e map color e map border width Adjusts the map border width Controls the map display e solid color eno color e crosshatch texture secre Controls geographic features displayed on the map Features are only visible if the map has no color or crosshatch texture Please select the Map Data M ap Laye rS Layers that you want to download to the CH
32. n 19 CN 600 series User Manual Route Information The Route Information screen provides information about your current route and let s you skip a trip destination point or cancel a route The screen is only available from the Main Menu when you are navigating a route Show Route Select to display your entire route on the Map screen Instruction List Select to display the nstruction List screen The Instruction List screen is similar to the Next Four Turns screen except that it displays your entire route Use the Page button to page through the instruction list Instruction 1 4 of 29 Summary Select to display the Route Summary screen containing your From and To addresses Estimated Time to arrival and the Distance remaining to your destination If you are navigating a multiple destination trip the information displayed will relate to your next destination point Route Summary Skip Destination Select to skip the next destination point of your trip Only available when navigating a multiple destination trip Cancel Route Select to cancel the route 20 CN 600 series User Manual 12 The Map Screen Pop up Menu The Pop up menu allows you to access navigational functions from the Map screen 1 Move round the Map screen using the 8 way toggle Zoom using and on the Zoom Brightness button 2 Press OK to display the cross hair on the Map screen e To remove the cross hair press ESC 3 Position
33. n of the next turn Additional information can be displayed here Press the 8 way toggle left or right to scroll the following options BARRYS POINT RD e Current speed T e Current time e Current bearing heading HDG Your current location e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG Distance to the next turn GPS strength indicator Next Four Turns Screen This screen displays the next four turns of your route the turn direction street name and the distance to the turn A route must have been calculated for this screen to display Access to this screen is set on the Settings Display screen 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button until the Next Four Instructions screen displays The next turn is highlighted at the top of the list EXIT LEFT A3025 THE 390 I TCHEN BRIDGE et The distance to this turn SECOND EXIT 1 5 A3025 PORTSMOUTH km EXIT LEFT 1 6 Additional information can be displayed A3025 PORTSMOUTH km here Press the 8 way toggle left or 3 0 right to scroll the following options MARINE PARADE km e Current speed e Current time e Current bearing heading HDG e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG GPS strength indicator Your current locatio
34. nce 2 Where the Customer uses the Software on a handheld or any other device the Device in a vehicle the Customer must not place secure or use the handheld device in a manner that may cause accidents personal injury or property damage or in any way obstruct the visibility of the Customer The Customer is solely responsible for observing safe driving practices and will not operate the Software while operating a vehicle 3 The copyright and all other intellectual property rights in the Software and Materials including any enhancements or modifications are vested in the Licensor The Customer must not to rent lease reproduce translate adapt vary reverse engineer or modify the Software or Materials nor communicate the same to any person other than in accordance with the terms of this Licence 4 The Customer may not copy the Software or Materials except that one copy of the Software may be made to the extent that such copying is necessary for the Customer s own backup purposes 5 Except for the warranty provided by the Licensor for the product that includes the Software the Licensor expressly excludes to the fullest extent permitted by law all representations or warranties express or implied except any which may not lawfully be excluded including the implied warranties of merchantability and fitness for a particular purpose 6 The Licensor will not in any circumstances be liable under the law of tort contract or otherwise for any in
35. nent solution the adhesive tape cannot be removed once fixed 1 ON Oa KR WO D g Choose a position on the dashboard where the CN will be clearly visible by the driver and ensure all surfaces are clean and dry Remove the protective layer from the tape and press down firmly for 30 seconds Press the suction cup firmly against the surface and press the lever down Use the base plate and screws supplied to fix the ICN base into the dashboard Slip the locking nut over the ball foot with the flat side facing upwards Snap the socket clip onto the ball foot Wind the locking nut onto the thread of the socket clip until firm Snap the iCN onto the socket clip Position the two locating tabs on the underside of the CN into the corresponding slots on the socket clip Then push the ICN into the clip Open the antenna outwards so the GPS antenna has a clear view of the sky 10 Plug the power cable into the socket on the left side of the ICN and the other end into the vehicle lighter Ei A socket ICN 635 650 only TE S CN 600 series User Manual 6 Main Menu Screen The Main Menu screen gives you access to all of the iCN s functions including navigating to a destination 1 Press the MENU Power button for about one second 2 The Language screen will display Use the 8 way toggle to highlight your language choice and press OK e You can stop the Language screen displaying on startup by sel
36. on option The Destination screen will display 2 From the Destination screen select the Points of Interest option The Destination PO screen will display Destination POI ENTERTAINMENT gt THEATRE E a ESC amp P UNITED KINGDOM gt Select a Category using the 8 way toggle press OK Select a Type press OK to narrow the search Select a Country to confirm press OK Select an Area by pressing Page Enter a name and choose from the list Press OK The Select PO screen will display press OK the Select PO text entry screen will display a list Select a POI using the 8 way toggle Press Page to view more Press OK to select from the list O O N O OF A The POI Detail screen will display Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen To a Recent Destination The last 30 routes are stored as Recent destinations 1 From the Main Menu select the Destination option 2 From the Destination screen select the Recent option The Recent screen will display YIEW RD GLENFIELD MOSSOP RISE GLENFIELD WAIRAU RD GLENFIELD JAMES ST GLENFIELD KATHLEEN PL GLENFIELD VIEW RD HOWICK SUNNYBRAE RD GLENFIELD AORANGI PL NORTHCOTE BIRKENHEAD AYE
37. oss hair on the Map screen e To remove the cross hair press ESC 3 Use the 8 way toggle to place the intersection of the cross hair on a destination the street name will display 4 Press OK to select the street as your destination The Pop up menu will display 5 Select Navigate To The route is calculated and displayed on the Map or 3D Map screen 16 CN 600 series User Manual 10 Avoiding an Area You can calculate a route that avoids a specified area on the map Up to ten Avoid Areas can be added Avoid Areas are displayed as shaded areas If no alternative route exists you will be routed through an Avoid Area CN 635 650 only Adding an Avoid Area 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over the area that you want to avoid using the 8 way toggle 3 Press OK to display the Pop up menu 4 Select Add Avoid Area Press OK An Avoid Area is displayed CULEBRA TER CHESTNUT ST 25 5 Set the Avoid Area to the correct size and position using the 8 way toggle 6 Press OK to enable the Avoid Area Deleting an Avoid Area 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over the Avoid Area that you want to delete using the 8 way toggle 3 Press OK to display the Pop up menu Select Delete Avoid Area Press OK The Avoid Area is deleted
38. press OK Select a road Press OK 9 Press the Page button to display the Adadress Details screen 10 Select Save press OK The New Favorite screen will display New Favourite 11 Select the Name box and press OK The Enter Name screen will display e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK The New Favorite screen will display Shortcut 9 gt 12 Select the Save As box and use the 8 way toggle to save as a Save Favorite or Shortcut 13 Select Save and press OK to return to the Map screen Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list saving Favorites and Shortcuts from the Map Screen 1 From the Main Menu select the Map option The Map screen will display 2 Press OK to display the cross hair 3 Position the intersection of the cross hair on a destination using the 8 way toggle Where the cross hair intersect on a street the street will highlight and the street name will display 4 Press OK The Pop up menu will display 5 Select Add to Favorites and press OK The New Favorite screen will display 6 Select the Name box and press OK The Enter Name screen will display e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK T
39. r or replace any defective product or its components at no cost to You for parts and labour The replacement product or component takes on the warranty status of the original product or component This is Your exclusive remedy for defective products Limitations This warranty does not apply to products that have been damaged or rendered defective a as a result of incorrect installation misuse mishandling misapplication accident abuse breakage or other external causes b by operation outside the usage specifications stated in the product documentation c by modification or service other than by Navman or its approved Service Centres Software Product Navman warrants that a the software will perform substantially in accordance with the accompanying written materials for a period of 90 days from the date of purchase and b any technical support provided by Navman or its approved Service Centres shall make commercially reasonable efforts to solve any problem or issues Some countries states and jurisdictions do not allow limitations on duration of an implied warranty so the above limitation of 90 days may not apply Limitation of Liability To the fullest extent permitted by law Navman will not be liable in any event whether in tort including negligence contract or otherwise for any damage including loss of profits any consequential indirect or special damage loss or injury of any kind suffered by You or any other person Except a
40. ress OK Select a road Press OK 9 Press the Page button to display the Adadress Details screen 10 Select Add to Trip and press OK The destination point is added to your trip The Trip Planner screen will display e To add another destination point go to step 2 11 To move a destination point up or down select the point and press OK The Address Details screen will display e Select Move and press OK The Trip Planner screen will display with the selected destination point highlighted e Use the 8 way toggle to move the destination point up or down the list e Press OK 12 To delete a destination point select the point and press OK The Address Details screen will display e Select Delete from Trip and press OK The rio Planner screen will display with the selected destination deleted 13 Choose one of the following options e Add Opens the Destination screen to add a destination point e Clear Deletes all destination points e Save Opens the New Favorite screen to save the trip as a Shortcut or Favorite e Go Calculates the route and displays it on the Map or 3D Map screen 15 CN 600 series User Manual Using the Map screen to Plan a Route You can plan a route directly from the Map screen using the Popup menu 1 From the Main Menu select the Map option The Map screen will display e Move round the Map screen using the 8 way toggle e Zoom using and on the Zoom Brightness button 2 Press OK to display cr
41. result from the list Press OK CN 600 series User Manual 8 GPS Status Signals are transmitted by Global Positioning System GPS satellites orbiting the Earth This screen provides a visual representation of the information being received Latitude and longitude are displayed along with a North pointing compass the heading in degrees and ground speed Satellites available are shown as segments From the Main Menu select Settings gt More Settings gt GPS Status The GPS Status screen will display e Yellow a satellite is being tracked but is not being used e Red a satellite is being used to determine a two dimensional 2D fix e Green the satellite is being used to determine your position GPS Status Latitude and longitude Bs Current heading in degrees and of the current position ground speed Each segment represents a satellite A green circle indicates a valid fix Local time The circle under the sattelite segments is green when there is a valid fix 2D or 3D and red when there is no fix While a 2D fix Is sufficient to maintain a valid fix a 3D fix is more accurate Satellite Signal Strength Satellite Signal Strengths From the GPS Status screen press the Page button to display the Satellite Signal Strengths screen The strength of each satellite is displayed on a bar chart The circle on the right hand side of the screen displays green when there is a valid fix 2D or 3D and red when no fix is
42. s expressly set out in this warranty Navman makes no other warranties express or implied including any implied warranties of merchantability and fitness for a particular purpose If any limitation or exclusion or liability contained in this warranty is held to be invalid for any reason and Navman becomes liable for loss or damage that would otherwise have been excluded such liability will be limited to the total amount actually paid by You for the product 39 CN 600 series User Manual Compliance Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device 40 Contact Us Support for New Zealand Navman NZ Ltd 13 17 Kawana Street Northcote Auckland New Zealand Phone 0800 GONAVMAN ocnsupport nz navman com www navman com Support for Europe Navman Europe Limited 4G Gatwick House Peeks Brook Lane Horley Surrey RH6 9ST United Kingdom Phone 44 1293 780 500 support navman europe com www navman europe com Copyright dat EA TE osuo oana tacon E BOO TN SP NIE 00 O 10 0 00 i 0 iCN 600 series User Manual Support for the US and Canada Navman USA Limited 2 142 Burbank Foothill Ranch CA 92610 United States of America Phone 866 9 NAVMAN support navmanusa com www navmanusa com Support for Australia Navman Au
43. select the Language option The Settings Language screen will display settings Language Language 3 To change the voice scheme used for voice guidance during e navigation select your preferred voice scheme from the Language Voice Guidance Instructions box using the 8 way toggle 4 To enable voice guidance during navigation select the Enable check box D Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Display Settings From the Main Menu select the Settings option t 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Display option The Settings Display screen will display 4 To enable auto zoom when navigating to your destination select the Settings Display Auto Zoom check box If selected the Map and 3D Map screen will automatically zoom in or out depending on your speed to allow optimal view of your route Map Color Scheme 5 To enable access to the Next Turn screen select the Display Next e Onsen Turn Screen check box Map Colours 6 To enable access to the Next 4 Turns screen select the Display Next 4 Turns Screen check box 7 To change the color scheme select your preferred scheme from the ESC ef Map Color Scheme box using the 8 way toggle 8 To improve screen contrast in light or dark conditions select either Day or Night 9 To display a
44. ser Manual e Press the Page button to view additional files D Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Active Points Of Interest POIs Settings Active POIs are custom POls that are announced when in close proximity Custom POIs are added from the SmartST Desktop POI Editor 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts screen select the Active POI option The Select Active POI Activation Settings PO screen will display 4 Use the 8 way toggle to select a custom POI Use the keyboard to narrow your search if required 5 Click OK The PO Activation Settings screen will display 6 Select the Active check box to activate the POI 7 Modify the settings as required e To enable an audible chime when the POI is in close proximity select the Audio Warning check box e To enable a visual warning when the POI is in close proximity select the Visual Warning check box e Move the Distance to POI slider to select the distance at which the warnings will activate 8 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Speed Alert Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts scre
45. splay brightness is set at over 70 Use low screen brightness when possible Volume 1 Press and hold the Volume button to display the Volume bar 2 Press or on the Volume button to adjust the volume Route Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Routes option The Routing screen will display Move the Route Type slider towards Shortest to give more weighting Routin to the shortest distance when calculating a route Move the Route TEA g Type slider towards Quickest to give more weighting to the fastest ee Su time when calculating a route Preference for Freeways Move the Preference for Freeways slider towards Use Less to use J freeways less often when calculating a route Move the Preference BS we EE FreTerence IO Urban Roads for Freeways slider towards Use More to use freeways more often 5 when calculating a route Move the Preference for Urban Roads slider towards Use Less to Set Default use urban roads often when calculating a route Move the Preference Eika for Urban Roads slider towards Use More to use urban roads more often when calculating a route Press the Page button 7 Select the Avoid Toll Roads Avoid Unsealed Roads and Avoid Ferries check boxes to avoid these areas when your route is calculated Select the Warn when using Toll Roads Warn when using Unsurfaced Roads and Warn when using Ferries check boxes to display
46. stralia Pty Ltd PO Box 479 Gladesville NSW2 1114 Australia Phone 02 9879 9000 ocnsupport aus navman com www navman com NAVMAN 2004 Navman NZ Limited Navman is a registered trademark of Navman NZ Limited All rights reserved Microsoft Windows 98 ME 2000 or XP Microsoft Internet Explorer are registered trademarks of Microsoft Corporation SmatSI Drive Away and Back On Track are trademarks of Navman NZ Limited All rights reserved Acrobat Reader is a registered trademark of Adobe Systems Incorporated All rights reserved All other trademarks and registrations are the property of their respective owners Published in New Zealand MNOOOSOO0A LFO00013A 41
47. topographical map on the Map and 3D Map screens select the Topographic Display check box 10 Press the Page button 11 To display grid lines on the Map and 3D Map screens select the Display Map Grid check box 12 To display a North pointing compass on the Map and 3D Map screens select the Display Compass on Map checkbox 13 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box 26 CN 600 series User Manual Internal Map Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Internal Maps option The Maps Internal screen will display 4 To activate a map use the 8 way toggle to scroll to the map or maps you require Press OK D Press ESC repeatedly until the Map screen displays e f you have made changes to maps select Yes and press OK to accept the Warning dialog box Memory Card Map Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Memory Card Maps option The Maps Memory Card screen will display 4 To activate a map use the 8 way toggle to scroll to the map or maps you require Press OK D Press ESC repeatedly until the Map screen displays e f you have made changes to maps select Yes and press OK to accept the Warn
48. u Select Set as Start Location Press OK Step 3 Select Destination Point 1 Press OK and place the intersection of the cross hair over your destination point using the 8 way toggle 2 Press OK to display the Pop up menu Select Navigate To Press OK The 3D Map screen will display and the Route Simulator starts your route e f you have selected the Repeat check box on the Routing 2 3 screen the Route Demonstrator will repeat until you stop it To Disable Route Demonstrator e Press Menu Power to return to the Main Menu screen e Select the Route Information option then the Cancel Route option e Press OK to confirm You will be returned to the Vain Menu screen 22 CN 600 series User Manual 14 Favorites amp Shortcuts You can save up to 200 destinations as Favorites 10 of which can be Shortcuts 50 Favorites for iCN 610 620 saving Favorites and Shortcuts 1 From the Main Menu select the Destination option 2 From the Destination screen select the Address option The Destination Adadress screen will display Note You can also add a Favorite or Shortcut using intersections Cities Towns Points of Interest and recent destinations 4 Select a Country using the 8 way toggle press OK 5 To select a Region press OK Select a region Press OK 6 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 7 To select a Town press OK Select a city or town Press OK 8 To select a Road
Download Pdf Manuals
Related Search