SMART BABY MAT
Contents
1. When you call or contact us for support please include as much information possible from the packaging material This will help us in soeeding the process MAINTENANC e DO NOT subject the mat to sharp folds other than the mid point fold as it may damage the sensing element and affect the functionality and sensitivity of the mat WARRANTY WILL BE VOID ONCE THE MAT IS FOLDED AT ANY PART OF THE MAT OTHER THAN THE DESIGNATED MID POINT FOLD eDO NOT wash or immerse the whole mat in water Clean the mat with a soft damp cloth and allow to dry eKeeo your mat away from sources of moisture It may cause the electronic control circuit to malfunction e DO NOT drop the Receiver on the floor as it may damage internal components and cause malfunction eKeep the Receiver away from moisture eRemove batteries from the Receiver and mat when not in use for a long period of time e The operating temperature range for the UBC is from 10 C 40 C DO NOT operate beyond this range as it may not function according to defined specifications eS eS UBC 001 UBabyCare User Manual LIMITED WARRANTY Your UBC is covered warranty for malfunction in the electronic parts only for a period of 12 months from the date of the original purchase when used in accordance with the instructions provided with the unit The mat material is a disoosable item which is subject to wear and tear will not be covered in the warranty We will at our discretion repair2. disabled at this time Release the button when the alarm is off Note 15 Upward trend of rapid body movement alert In the event of upward trend of rapid body movement detected the display will blink switching between current body movement count reading and H symbol to indicate high body movement The alarm will be activated Press and hold the MODE SELECT or POWER button once to de activate it normal button functions are disabled at this time Release the button when the alarm is off Note the function and display will not activated when the baby is not asleep 16 downward trending of low body movement detection In the event of downward trending of low body movement detection the display will blink switching between current body movement count reading and L symbol fo indicate low body movement The alarm will be activated Press and hold the MODE SELECT or POWER button once to de activate it normal button functions are disabled at this time Release the button when the alarm is off Note the function and display will not activated when the baby is not asleep Go UBC 001 UBabyCare User Manual Yul SSA UBC 001 UBabyCare User Manual C Others 17 Out of range T The open space distance limit between the Receiver and mat is up to 50 m Indoor limits will be reduced significantly subject to the layout of the ap ap building concrete structure The antenna and monitor alert symbols wi
3. detection is disabled by default in factory When disabled the baby wake up or absence state will still be indicated visually on the Receiver display 7 Alarm type selection d Adjust the tone selector switch up or down to select sound or both sound and vibration A FZ iii A The sound and vibration functions will be disolayed on the LCD WARNING It is advisable NOT to disable alarm when your baby is unwell or need extra attention 10 UBC 001 UBabyCare User Manual Functions A Baby Movement Condition No sleeping After calibration process 8 Baby continue movement detect Tul S The display with show M when movement is r r detected j E 5 9 No body movement Tul o The display with show 00 when no subtle body movement is detected for consecutive 15 j Tg seconds The alarm will be activated Press and hold the MODE SELECT or POWER f i button once to de activate it normal button _ functions are disabled at this time Release the button when the alarm is off Note Audio alarm will also be activated on the mat independent on whether the receiver is powered on 10 Baby absence Yul cod The display with show when baby is taken out or not on the mat The alarm will be activated Press and hold the MODE or SELECT button once to de activate it normal button functions are disabled at this time Release the button when the alarm is off e a UBC 001 UBab
4. SMART BABY MAT Intelligent Baby Movement Monitor Service Call for Babies USER MANUAL UBC 001 Series www huiyia tech com www ubabycare com UBC 001 UBabyCare User Manual WARNING IMPORTANT INFORMATION ON USAGE CONDITION Read the instructions carefully before using your UBC 001 Series Smart Baby Mat UBC UBC has two devices that are Movement Receiver receiver and Wireless Movement Optics Mat mat Please put the mat on the bed or mattress and don t put it under the mattress You can put a sheet or a towel 1cm thickness limit on top of the mat For best sensitivity results please take note of the following Place your baby on the mat such that the chest back body area lies on the upper or lower part of the mat Avoid the mid point folding area of the mat DO NOT break the warranty seal of the Mat packaging until you had tested the functionality of the mat and receiver with a new set of batteries Breaking the warranty seal constitutes acceptance of the product in working condition QUICK START FUNCTIONAL TEST Insert fresh batteries into the battery compartments of the mat and Receiver Power on the mat and receiver The display should indicate scrolling in a circular fashion to indicate a calibration process Note Should the display show an error message El EY kindly return the product to the service center for support Baby weight limit on the mat for effective monitoring sho
5. display on the movement patterns sensitivity level with the SELECT Receiver when button baby is sound asleep Out of range e The mat and Receiver are indication too far apart e The mat or Receiver may be placed near large metal objects e The link between the mat or Receiver may be lost e Battery Is not inserted on the mat e Try to adjust the relative distance nearer between the mat and Receiver e Power off and on again for both the mat and Receiver to try establishing the link e Enable manual pairing by powering on 1 mat and Receiver refer to Operation of the UBC Section Other of indication e Ensure battery Is inserted on the mat side Wireless link loss e Range too far between e Maintain closer range mat and Receiver between mat and Receiver J Low battery Replace batteries Low battery indication e Batteries on the mat or e Replace batteries Receiver may be low or faulty e The fiber sensor is broken e Mat is no longer functioning Please contact your service center io cl Fell of the mat mat e Device Malfunction e Please contact your service center Doa UBC 001 UBabyCare User Manual TECHNICAL SUPPORT Before you contact the Technical support please read the Troubleshooting and FAQ section If you have questions about the use or features of the player please contact our Calll Center at the following e mail address support huijia tech com or contact UBabycare agent you buying it from
6. for the mat e 2X AAA dry cell battery for the Receiver UBC 001 UBabyCare User Manual SPECIFICATION AND PARTS DESCRIPTION UBC 001 A Receiver Turn ON or OFF Reset alarm Press and hold the button Toggle between functional modes MODE button Reset alarm press and hold the button Toggle between selection in the designated mode SELECT button Reset alarm press and hold the button Battery To insert 2 x AAA dry cell batteries Compartment Display of baby movement status LCD display N functional indicators Alarm selector TO To select vibrate or both sound and vibrate alarm vibrate or both sound and vibrate alarm a To clip the Parent Control Unit to the body of a Ip ina ease To leave the Receiver on a table To leave the Receiver on a table top or flat surface or flat surface 1 Battery Type 2 x AAA Battery 2 Size 10 5cm x 5 6cmx 1 6cm 3 Weight About 60g not including the batteries 4 Color White Yellow 5 Material ABS Plastict t Rubber Keys 6 UBC 001 UBabyCare User Manual UBC 001 B MAT 2o ON OFF switch Turn the mat ON or OFF Power LED indicator Mat operation status indication Battery compartment l l 11 i i To insert 4 x AA dry cell batteries for the mat of ma Fold the mat locations other locations do not 14 Foldable Position fold O 1 Size 8142cm x 50 1cm x 2 540 5cm 2 Size About 42cmx 50cm x 3cm 3 Weight about 1100 1200g Not incl
7. l be shown as HP to indicate high pressure such as heavy weight on the mat or the baby sitting up The alarm will also be activated Note If the indication remains when the baby is in sleeping position the baby weight had exceeded the defined weight limit of the mat Warning There may be exceptional unknown situations eg where babies toss or rotate such that only part of their body lies on the mat parent s hands or elbows may press hit on the mat or on the cot mattress where the mat is placed when carrying up the baby rendering the current state of the baby to be non deterministic AS a precaution for the unknown states the display will alternate blinking of out of mat and no body movement 00 on the Receiver to alert parents care givers to check on the baby Please attend to your baby _15 UBC 001 UBabyCare User Manual Troubleshooting and FAQ False alarm e The baby may have e Switch off the Receiver excessive movement when when the parent caretaker the caretaker sibling is playing sibling is attending to the next to the baby or attending baby Switch it on again to to the baby s need changing continue monitoring when diapers feeding patting baby Is asleep e External event such as patting action high vibration or motor running activities near the mat replace battery if needed detected low level with the SELECT button W Movement e Baby may have strong e Adjust down the
8. ll blink simultaneously when communication cannot be maintained between the Receiver and mat Walk closer towards the mat with the Receiver to re establish the link Note Alarm will be also activated on the Receiver when the mat is NOT powered on 18 Manual pairing of mat and Receiver Each mat is automatically pre paired with each of its Receiver Where there is a need to manually pair the units power off and on the mat again Power off and on the Receiver as well Upon powering on press and hold both POWER and MODE buttons simultaneously Release buttons when display shows a P symbol alternating between the left and right hand sides Pairing process will complete automatically and beep tone will sound to indicate that the UBC starts operation 19 Low battery indication for mat The low battery indication for the mat will blink simultaneously and when battery for the Parent Control Unit is low The audio alarm will be activated independently of the switch selection for the alarm type Replace battery for the mat me UBC 001 UBabyCare User Manual 20 Low battery indication for Receiver The low battery indication for Receiver will blink simultaneously when battery for the Receiver is low The audio alarm will be activated independently of the switch selection for the alarm type Replace battery for the Receiver 21 Weight limit indication for mat The weight limit indication for the mat wil
9. ol is blinking Adjust sensitivity by pressing the SELECT button Set maximum sensitivity and adjust downwards to make sure there is no false alarm Below is a general guideline for setting the sensitivity level guideline Display Sensitivity Level 3 lt 6 months lt 5kg default Sensitivity Level 2 6 9months 5 10kg 5 Sensitivity Level 1 9 12month 10 12kg 6 Baby wake up absence alarm Function Setting The baby wake up absence alarm enable function allows caregivers parents to enable disable the alarm notification for BOTH the baby wake up AND absence detection To set the baby wake up absence alarm enable function press the MODE button until the function symbol is blinking Press the SELECT button to turn ON OFF the baby wake up absence alarm enable function The baby wake up Function On ve display absence alarm Function OFF No 7 display enable function Within the baby wake up absence alarm enable function is ON When large movement the display with show M When baby is taken out or not on the mat the display with show Both of the alarm will be activated Within the baby wake up absence alarm enable function is OFF When large movement the display with show M When baby is taken out or not on _9 UBC 001 UBabyCare User Manual the mat the display with show But No alarm will be activated BOTH the baby wake up and absence
10. on It is advisable to use the mat for sleeping purpose and should not be used as a play mat DO NOT stamp or jump on the mat as the action may damage the mat and cause malfunction Avoid major movement activity around the mat as it is highly sensitive and may pick up the movement signal as part of the movement signal of the baby Patting action high vibration or motor running activities will affect the accuracy of the baby movement count DO NOT subject the mat to sharp folds other than the mid point fold and sharp objects as it may damage the sensing element and affect the functionality and sensitivity of the mat DO NOT add thick and heavy items such as mattress between your baby and the mat as sensitivity of the mat will be compromised Adhere to the 2kg 12kg 26lb weight limitation of the mat It is not meant for adult use DO NOT wash or immerse the whole mat in water Keep your mat away from sources of moisture If may cause the electronic control circuit to malfunction Any form of spillage or stain should be wiped off immediately with water on a damp cloth to prevent permanent stain on the mat Avoid using strong detergent Gentle wipe is sufficient to clean up stains Excessive scrubbing action may damage the water resistance property of the mat Observe polarity of the battery placement for proper functioning of the mat DO NOT disassemble crush short circuit or incinerate the battery as it may cause fire injury burns or o
11. or replace the product free of charge should it fails to function properly when used as directed within the warranty period This warranty does not cover the battery damaged as a result of accidents improper maintenance or any other form of misuse The warranty is also void if the Owner attempts to fold the mat when instructed not to as stated in the user manual repairs or modifies the product in any way We are not liable for any incidental or consequential damages with regard to this product The warranty also excludes any liability other than what is stated above Your UBC operates on frequency of 433Hz and complies with EN and Part 15 of the FCC rules For any technical assistance contact the technical support center
12. ow 00 and alarm will be activated when no body movement is detected The display will show alternate blinking of H and current body movement count when high body movement is trending up Alarm will also be activated The display will show alternate blinking of L and current body movement count when downward trending of low body movement is detected Alarm will also be activated The display will show HP to indicate high pressure such as heavy weight on the mat or the baby sitting up The alarm will also be activated Please contact your service centre Please replace batteries for the mat Please contact your service centre UBC 001 UBabyCare User Manual TABLE OF CONTENTS Warning I Disposal instructions 5 Getting Started 5 Specification and Parts description 6 Operation of the UBC 8 Troubleshooting and FAQ 15 Technical Support 16 Limited Warranty 17 DISPOSAL INSTRUCTIONS Do not dispose of this mat and the receiver with unsorted waste Improper disposal may be harmful to the environment and human health Please refer to your local waste authority for information on return and collection systems in your area GETTING STARTED Package contents Your UBC 001 package includes UBC 001 A Movement Receiver Receiver UBC 001 B Wireless Movement Optics Mat Mat User Manual Carrier bag Before you can use the mat you need the following not included in the product e 4X AAdry cell battery
13. ther hazards DO NOT put the Parents Control Unit near wireless devices or a microwave oven Such devices can disrupt the transmission of the alarm signal The operating temperature range for the UBC Is from 10 C 40 C DO NOT operate beyond this range as If may not function according to defined specifications oe UBC 001 UBabyCare User Manual Receiver Status Indication Summary Sheet Commonly occurring states Status Indication Yul od A oy z f i Zh Yul d A Cy iS Zh Yul XA A fy ix Zh Yul od A Coy iS Yul A A Coy T Gy Zh Ld Event Calibration in progress Subtle body movement count Wake up alarm Continuous movement Absence from mat No body movement detected High body movement trending up Low body movement trending down High pressure exerted Weight limit exceeded Error 1 Fiber sensor is broken Error 2 Extreme low battery level of the mat Error 9 Device Malfunction Remarks The display will indicate scrolling in a circular fashion for a period of around 30 seconds The digit change dynamically depending on the subtle body movement count The display will show M blinking whenever the baby moves After the baby falls asleep movement alert is activated after a continuous movement period of 20 seconds The display will show blinking and alarm will be activated whenever the baby is out of the mat The display will sh
14. uding the batteries 4 Color White Yellow 5 Materials ABS Plastic Latex Waterproof cloth RF Parameter 1 Frequency 4383MHz ISM band 2 Output power 10dBm Fe UBC 001 UBabyCare User Manual OPERATION OF THE UBC 2Kg 12Kg Baby is suitable 0 12 months 1 Insertion of battery on the mat Flio the mat over to the bottom side Open up the battery compartment cover Insert the 4 AA batteries MODE SELECT 2 Insertion of battery on the Receiver Open the battery compartment below the 3 buttons by sliding the cover downwards as shown by the arrow label Insert the 2 AAA batteries 3 Power on the Mat Press the ON OFF switch towards the ON position The LED indicator on the top of the sensor box will light up alternating between green and red color 4 Power on Receiver Press and hold the power C button till the LCD display is lighted up The receiver will establish connection with the mat automatically The display will indicate scrolling in a circular fashion during a calibration process of around 30 seconds as shown Once connection is established the blinking will cease and the baby status will be displayed The display will show M to indicate baby movement detected when the baby is moving 8 UBC 001 UBabyCare User Manual 5 Mat sensitivity adjustment TOF To set mat sensitivity press the MODE button until m the mat sensitivity symb
15. uld fall within the range below 2kg 4 4lb 12kg 26 4lb Place your baby on the mat such that the chest back body area lies on the upper or lower part of the mat Avoid the mid point folding area of the mat Avoid placing any cloth material between the baby and the mat When cloth material is placed on the mat thickness of the material should be less than 1cm Recommended materials are bed sheet bath towel or swaddling cloth Other unknown materials may compromise the sensitivity Bie UBC 001 UBabyCare User Manual NO JUMPING STAMPING NO SHARP HITS NO BENDING OTHER NO HOLDING OF THE NO IMMERSING IN THAN THE MID POINT EDGE IN ONE HAND WATER a UBC 001 UBabyCare User Manual eThe UBC is NOT a medical device or a diagnostic device to prevent Sudden Infant Death Syndrome SIDS or cot death Babies with a known predisposition to any breathing abnormality including apnea should be monitored by a doctor Please seek advice trom doctors or health care professional for medical diagnosis or when unsure of any symptoms eYou should not rely on the UBC for the wellbeing of your baby It is NOT a substitute for proper adult supervision It is important that an adult stays within range of the monitor at all times during use Please handle the mat with two hands DO NOT hold it by the edge with one hand or bend the mat Rough handling and bending of the mat other than the mid point may damage the mat and cause malfuncti
16. yCare User Manual B Baby Movement Condition Sleeping 11 Baby movement count Tull sod At The baby body movement count per minute of the baby is monitored and displayed on the i a LCD i Typical body movement count range between 30 and 60 12 No body movement The display with show 00 when no body movement is detected for consecutive 15 seconds The alarm will be activated Press and hold the MODE SELECT or POWER button once to de activate it normal button functions are disabled at this time Release the button when the alarm is off Note Audio alarm will also be activated on the mat independent on whether the receiver is powered on 13 Wake up alarm The Wake up alarm will be activated only after the baby is asleep for more than 5 minutes The display with show M when continue movement eg awake crying is detected When a constant baby movement period of 20 seconds is detected the alarm will be activated Press and hold the MODE SELECT or POWER button once to de activate it normal button functions are disabled at this time Release the button when the alarm is off Once de activated there will be a time out period of 5 minutes before the alert will be re enabled Bios 14 Baby absence The display with show when the baby has rolled or carried out of mat The alarm will be activated Press and hold the MODE or SELECT button once to de activate it normal button functions are
Download Pdf Manuals
Related Search