- Wuntronic GmbH
Contents
1. WURTHORIC ExpressBox 1T User Manual Thunderbolt to PCIe Expansion Model EBILI Heppstraase 30 D 80995 Munchen Phone 49 89 3133007 Fax 49 89 3146706 ac Table of Contents Preface 3 Advisories 3 Safety Instructions 4 Chapter 1 Introduction 6 PCI Express Features 6 Thunderbolt Features T Specifications 7 Pre Installation Information 8 Parts List 8 Tools Required for Installation 8 Chapter 2 Hardware Installation 9 Open Enclosure 9 Install PCle Cards 10 Extra Power 12 Fan Controller 12 Connect Cables and Turn On 12 Control Fan Speed 14 Daisy Chaining 15 Attaching Displays 15 Chapter 3 Verify Installation 16 MacOS X 16 Thunderbolt Compatible Driver is Required 17 Windows 18 Troubleshooting 18 Chapter A How to Get More Help 22 Frequently Asked Questions FAQ 22 Contacting Technical Support 22 Returning Merchandise 23 Appendix A Compliance 24 ExpressBox 1T Preface ao A Preface Advisories Five types of advisories are used throughout this manual to provide helpful information or to alert you to the potential for hardware damage or personal injury Zem LLT d ee NM Important Caution Warning NOTE Used to amplify or explain a comment related to procedural steps or text IMPORTANT Used to indicate an important piece of information or special tip to help you CAUTION Used to indicate and prevent the following procedure or step from causing damage to2. Click on the specific PCle card in question to see if it s Thunderbolt Compatible If it shows Yes then its compatible if it shows No the PCle card will not be visible in ExpressBox 1T e090 MacBook Air ExpressBox 1T Chapter 3 Verify Installation eae Hardware Card tr Type Driver Installed Slot ATA pcila00 1 Other Multimedia No Thunderbolt 105 0 0 Audio Built In pcillaf ef70 Other Multimedia Yes Thunderbolt 106 0 0 Bluetooth pcillaf ef70 Other Multimedia Yes Thunderbolt 107 0 0 Card Reader Diagnostics Disc Burning Ethernet Cards Fibre Channel FireWire Graphics Displays Hardware RAID Memory Parallel SCSI Power Printers pci1a00 1 SAS Serial ATA Type Other Multimedia Thunderbolt Driver Installed No USB Tunnel Compatible No MSI No Y Network Bus PCI Firewall Slot Thunderbolt 105 0 0 Locations Vendor ID 0x1la00 Mocams arma Vendor ID Dalat Volumes Subsystem ID 0x0002 WWAN Revision ID 0x0000 Wi Fi Link Width xl Software Link Speed 2 5 GT s Applications Components Developer Extensions Fonts Frameworks Logs Managed Client Preference Panes Printer Software Julia s MacBook Air Hardware PCI Cards pcila00 1 o EES Windows Open ACPI BIOS gt Open PCI Bus gt Click the sign several times until your reach a PCI Express Root Port with a PCI Standard PCI to PCl Bridge beneath it If the verification is successful you can install 3rd Party cards as well as au
3. Serial ATA Mac mini Mac mini USE F Network Wendor Name Apple Ine Firewall Device Name Mac mini Locations LAD Ox tODIODOCLARBES40 Firmware Version 22 2 Port Volumes Status Connected WWAN Link Status A Wi Fi Port Micro Firmware Version 2 0 7 e Software Cable Micro Firnvware Version 0 1 18 Applications ExpressBox 3T Components Developer Vendor Name Magma Exrendions Device Name ExpressBox JT Vendor ID x153 Device ID One Frameworks Device Revision Di Logo LAD OxtolSOo000000 1050 Managed Client Firmware Version 26 1 Preference Panes Port Status Connected Printer Software Vink Status 3 Profiles Cable Micro Firmware Version 0 1 18 Startup Items Super Port Micro Firmware Version 0 2 5 Swe Services Port linivar al Acai Status No devices connected lt eat So Link Status Super Port Micro Firmware Version 0 2 5 Modems Fonts ES Magma Mac mini Hardware Thunderbolt Mac mini ExpressBox 1T Chapter 3 Verify Installation PS tt EEEESEES Thunderbolt Compatible Driver is Required For MacOS a Thunderbolt Compatible driver is required because it allows PCle cards to be detected in ExpressBox 1T Ensure you have a Thunderbolt Compatible driver from the PCle card manufacturer otherwise the PCle card will not be visible to the system If the driver is installed make sure it supports Thunderbolt If the driver does not support Thunderbolt you will see a message Driver Installed No
4. Turning the system power off at the power on off switch Warring does not remove power to components High voltage is still present CAUTION Before touching anything inside the enclosure move to an ESD station and follow proper ESD procedures Failure to do so may result in electrostatic discharge damaging the computer or its components For more information see Protecting Against Electrostatic Discharge in the Preface Cautlon Open Enclosure Loosen the thumbscrew and slide the card carrier as shown below ExpressBox 1T Chapter 2 Hardware Installation 9 Install PCIe Cards Some card manufacturers recommend that you install their software driver prior to installing the card If this is the case be sure to install the card driver before connecting ExpressBox 1T to the computer e Slot 1 accepts x1 x4 x8 x16 E d Ge AN x ited Z Pres Kl mm ae Kik H Gi A m Ce B SSC Thunderbolt Card Slot x8 PCle Slot dedicated accepts x16 card Make sure that your PCle card is seated in the PCle slot connector When correctly seated there will be a firm resistance when you pull up gently on the card To keep the cards in place secure them in the enclosure with their retaining screws After securing the cards verify that they do not touch each other NOTE If at all possible plug all power cords from the expansion chassis and your host computer into a shared power strip preferably one that has
5. 11D amp DEV_806E amp SUBSYS_00000000 PCI VEN_111D amp DEV_806E amp REV_02 4 P PCI standard PCI to PClI bridge PCI VEN 111D amp DEV 806E P Base System Device PCI VEN_111D amp DEV_806E8CC_060400 E PCI standard PCI to PCI bridge PENVEN 111D amp DEV S06E amp CC 0604 a Be PCI standard PCI to PCI bridge a BR PCI standard PCI to PCI bridge 4 Loe z a FR PCI standard PCI to PCI bridge Bb PCI standard PCI to PCl bridge cb PCI standard PCI to PCl bridge cb PCI standard PCI to PCI bridge Be PCI standard PCI to PCI bridge cb PCI standard PCI to PClI bridge Be PCI standard PCI to PCI bridge e nere Chapter 4 Howto Get More Help Frequently Asked Questions FAQ You can visit the Magma Technical Support FAQ pages on the Internet at www magma com support Contacting Technical Support Our support department can be reached by fax at 858 530 2733 or by phone at 858 530 2511 Support is available Monday through Friday 8 00 AM to 5 00 PM PT You can also visit our web site at www magma com support For a quick response use the Technical Support and RMA Request Form available in the Support Section of the website Simply complete the form with all required information Please make sure that your problem description is sufficiently detailed to help us understand your problem ExpressBox 1T Chapter A How to Get More Help 22 Ce Returning Merchandise If factory service is required a Service Representative will give
6. Installations Port Micro Firmware Version 0 2 5 Logs Cable Firmware Version Managed Clerf Preference Panes Pegasus R Series Printer Software Vendor Name Promise Technolog Profiles Device Name Pegasus R Series y Startup Items Vendor ID 0x2 A Device ID 0x1 Sync Services Device Revision f i SSE 0 00000A6C0 Route String 101 Firmware Version 22 2 Darica Micra Fierce Marcion INANA a Julia s MacBook Pro gt Hardware gt Thunderbolt MacBook Pro In Windows Control Panel gt Device Manager gt View by connection You should see these three PCI to PClI bridges Right click on it and select Properties select Hardware Ids from dropdown list you should see PCI Ven_111D ExpressBox 1T Chapter 3 Verify Installation C I ae MagmaMini a E ACPI x64 based PC a Be Microsoft ACPI Compliant System cb ACPI Fixed Feature Button ce ACPI Power Button DI Intel R Core TM iS 2520M CPU 2 50GHz DI Intel R Core TM i5 2520M CPU 2 50GHz DI Intel R Core TM i5 2520M CPU 2 50GHz 7 PCI standard PClto PCI bridge DI Intel R Core TM i5S 2520M CPU 2 50GHz Bag a Be PCI bus Be High Definition Audio Controller a e PCI Express standard Root Port Be High Definition Audio Controller Value D Standard VGA Graphics Adapter a e PCI Express standard Root Port a FR PCI standard PCI to PCl bridge Property Hardware Ve PCI VEN_111D amp DEV_806E amp SUBSYS_00000000 amp REV_02 PCI VEN_1
7. a r mis H vi be KI hi sen E d JN J 8 ER i SS hei SN I RL e bk d 1 m EO N te YE a f F 1 KA Dy EEFT kd ep d Ze D H H une WA e eGllOreeceo pieooe 3 Green LEDs on Backplane Q If ExpressBox 1T does not power up how do determine whether have a bad power supply a bad interface card or defective cable A A working system should illuminate Five Green LEDs 5V MCU 3 3 1 0 DP LEDs on Interface card which are located on the top right corner And 3 3v PWR 5vAUX LEDs on Backplane should be also LIT or ON e When you have a Bad Power Supply you won t see any Green LEDs lit at all on the Interface card and backplane e When you have a bad cable you don t see LEDs 3 3 1 0 DP on the Interface card and LED PWR on backplane turning ON Swap or replace the Thunderbolt Cable e lf you already swapped the Thunderbolt cable and still LEDs 3 3 1 0 DP and PWR are not turning on this indicates you have a bad interface card ExpressBox 1T Chapter 3 Verify Installation mm tc C t Q How can I determine if the driver for my PCle card is Thunderbolt Compatible A Thunderbolt Tunneling is required for MacOS In Apple System Profile click on the specific PCle card in question to see if it s Thunderbolt Tunnel Compatible If it shows Yes then Thunderbolt tunneling has been enabled If it shows No then the driver does not work through Thunderbolt and the PCle card will not be visible in ExpressBo
8. allation thumbscrew LF LF gt gt gt Ce hb be e e gt kb bk gd ERR lt 2 o ae a P RF i Ka f LJN yi 4 A 4 3 H A A A A A Hardware Included 6 Power Supply E kV A s eo ee ee ee ae eeeeeeeaaeaaaa Owi 5 Ch CW ao ooo oo oe oeo oe oe oo oo oa oa aa aa gp s mm s s a 2 s L o i e Tools Required for Installation To complete the installation of the Magma product you will need a Phillips head screwdriver and ESD wrist strap to prevent electrostatic discharge ExpressBox 1T Chapter 1 Introduction Chapter 2 Hardware Installation The following steps will guide you through the installation of your Magma Expansion System CAUTION Hardware installation shall be performed only by qualified service personnel per UL and IEC 60950 1 Cautlon Electrostatic Discharge ESD Warning All add in cards are susceptible to electrostatic discharge When moving cards it is best to carry the cards in anti static packaging If you need to set a circuit card down be sure to place it inside or on top of an anti static surface For more information see Protecting Warning Against Electrostatic Discharge in the Preface WARNING High voltages are present inside the expansion chassis when the unit s power cord is plugged into an electrical outlet Disconnect the power cord from the AC outlet before removing the enclosure cover
9. ardware Installation nu Daisy Chaining IMPORTANT a For best performance it is recommended that ExpressBox 1T be the first device Important in the Thunderbolt Daisy chain Attaching Displays You can use an appropriate Display Port connector to add a Display Port HDMI DVI or VGA Display The Display Port connector can plug into the other Thunderbolt port on ExpressBox 1T Make sure your display is plugged in and the appropriate adapter is connected HDMI Mini Display Port VGA DVI ExpressBox 1T 15 ee wunironiccom Chapter 3 Verify Installation MacOS X To verify a successful installation on Mac select About This Mac under the Apple Icon KS Help Viewer File Edit View Go Library Window Help About This Mac Software Update Mac OS X Software System Preferences Dock Location Then click the More Info button click on the More Info System Information button gt you should see a pci bridge device listed under PCI as shown below PCle cards installed in the expansion chassis will typically appear behind the pci bridge device Some storage will not it will appear under Parallel SCSI Consult the manual for the PCle card for more OO Y Hardware Thit id olt Dewi ATA Mar mini Audio Built ini ExpressBou 37 Bluetooth Card Reader Diagnostics Disc Burning Ethennet Carda Fibre Channel FireWire Graphics Displays Hardware RAID Memory PC Cares Paralle SCH Power Printers SAS
10. cable to Thunderbolt port on your computer You can use the second Thunderbolt port on the Magma EB1T for connecting another Thunderbolt device or Mini DisplayPort device ExpressBox 1T will automatically turn ON when the computer is turned ON A BLUE light will shine when the expansion chassis is ON ExpressBox 1T will automatically turn OFF when the computer is turned OFF or goes into SLEEP mode If either end of the Thunderbolt cable is removed while the system is ON the expansion chassis will automatically power down ExpressBox 1T Chapter 2 Hardware Installation mm Ce ExpressBox 1T does not have ONN OFF switch The Blue LED on the front is a power indicator not a power button It simply indicates whether the chassis is on or off To turn on the ExpressBox 1T connect to Thunderbolt equipped computer The Blue light on the front of ExpressBox 1T is not an on off push button it simply indicates whether the chassis is on or off If either end of the Thunderbolt cable is disconnected ExpressBox 1T will automatically turn off Control Fan Speed For low power or self cooled cards you can reduce the fan noise by adjusting the Adjustable Knob found under the card carrier to the slowest speed setting If the chassis gets hot during use you should increase the fan speed to provide more cooling The Factory Default is setting medium The LOW for slow fan speed HIGH for fast speed setting ExpressBox 1T Chapter 2 H
11. ecting Against Electrostatic Discharge Electrostatic Discharge ESD Warning Electrostatic Discharge ESD is the enemy of semiconductor devices You should always take precautions to eliminate any electrostatic charge from your body and clothing before touching any semiconductor device or card by using an electrostatic wrist strap and or rubber mat Warning Static electricity can harm system boards Perform service at an ESD workstation and follow proper ESD procedures to reduce the risk of damage to components Magma strongly encourages you to follow proper ESD procedures which can include wrist straps and smocks when servicing equipment You can also take the following steps to prevent damage from electrostatic discharge ESD e When unpacking a static sensitive component from its shipping carton do not remove the component s anti static packaging material until you are ready to install the component in a computer Just before unwrapping the anti static packaging be sure you are at an ESD workstation or are grounded e When transporting a sensitive component first place it in an anti static container or packaging e Handle all sensitive components at an ESD workstation If possible use anti Static floor pads and workbench pads e Handle components and boards with care Don t touch the components or contacts on a board Hold a board by its edges or by its metal mounting bracket ExpressBox 1T Preface a o EES Chapt
12. er 1 Introdu ction ExpressBox 1T provides an outside the box solution for using PCle cards with Thunderbolt equipped computers High performance work flows are possible by connecting a Thunderbolt equipped computer to a Magma ExpressBox 1T containing PCle cards such as video capture media transcoding audio processing and fast data storage And because Thunderbolt is also based on DisplayPort technology you can daisy chain a high resolution display with your Magma ExpressBox 1T Thunderbolt cable is sold separately SS E Power indicator PCle card slot openings Thunderbolt ports Easy installation thumbscrews Power cord socket Ce i ie ic oa i I i ies i i Se a i a E A E E E a ae Ri o a a 2 4 9 9 9 4 8 4 4 6 9 9 9 6 4 4 8 46 9 9 0 6 9 9 3 6 9 4 PCI Express Features Sg f 6 Ff Thunderbolt Parts li a RB o ll ail bo per WW WW WW p Power Cord Power Socket Indicator f etere ecerrre Supports ONE half length card The total PCle lanes for one slot are 4 lanes Combinations can be X8 PCle card will run at x4 speed X16 PCle card will run at x4 speed ExpressBox 1T Chapter 1 Introduction 6 re Thunderbolt Features e Thunderbolt features speeds up to 10 Gbps bi directional e Daisy chain up to six Thunderbolt devices e Control fan speed and noise with potentiometer switch e Easy Plug and Play installation e Supports any x1 x4 x8 o
13. he assembler of a personal computer system may be required to test the system and or make necessary modifications if a system is found to cause harmful interferences or to be noncompliant with the appropriate standards for its intended use Industry Canada This Class A digital apparatus complies with Canadian ICES 003 Cetappareilnumerique de la classe A estconforme a la norme NMB 003 du Canada CE The product s described in this manual complies with all applicable European Union CE directives Magma will not retest or recertify systems or components that have been reconfigured by customers ExpressBox 1T Appendix A Compliance u Manual P N 09 09990 01 A1
14. r x16 PCle card e Two cooling fans with speed control e Two external Thunderbolt connectors e Rugged Extruded Aluminum chassis e External 65W power supply Specifications Description Technology PCI Express Bus Specification Revision 2 0 PCI Local Bus Specification Revision 2 3 PCI Bridge Architecture Revision 1 2 Backplane 1 Half Length Full Height PCI Express Slot Physical x16 PCle 2 0 Electrical x4 PCle 2 0 Thunderbolt spec Interconnect Bandwidth 10Gbps 1 25 GB s Bi directional Enclosure Heavy Duty Extruded Aluminum Chassis 9 5 L x 2 3 W x 6 9 H 249mm x 58mm x 174mm 3 0 Ibs 1 4 kg Power Supply Options 65 Watt Input 100 240 VAC 47 63 Hz 1 2A MAX Output 12V 7A Environmental Ambient Temperature 0 to 50 C Storage Temperature 20 to 60 C Relative Humidity 5 to 85 non condensing Regulatory Compliance FCC Class A Verified CE RoHS Compliant Warranty 30 day money back guarantee 1 year return to factory ExpressBox 1T Chapter 1 Introduction K e FE Pre Installation Information Before using the Magma Expansion chassis you should perform the following steps e Inventory the shipping carton contents for all of the required parts e Gather all of the necessary tools required for installation e Read this manual Parts List Rubber Feet EB1T Front and Rear View 1 Power indicator 2 PCI Express card slot opening 3 Thunderbolt ports 4 Power cord socket 5 Easy inst
15. s turned off the power to the downstream device ExpressBox 1T Chapter 3 Verify Installation mm CC Q Will ExpressBox 1T show up in Apple System Profiler or Windows Device Manager without any PCle cards installed Yes In Apple System Profiler gt Thunderbolt gt Status Connected gt ExpressBox 1T e090 MacBook Pro Y Hardware Thunderbolt Device Tree ATA MacBook Pro Audio Y ExpressBox Series Bluetooth YV Pegasus R Series Card Reader Y ExpressBox Series Diagnostics wv ExpressBox Series Disc Burning Intensity Extreme Ethernet Cards Fibre Channel MacBook Pro FireWire Graphics Displays a EEN Dr H RAID evice Name acintos meg UID 0x0001000D17F65280 emory Firmware Version 11 1 PCI Cards Port Parallel SCSI Status Connected Power Link Status 2 Printers Cable Firmware Version 0 1 18 Link Controller Firmware Version 0 11 4 SAS Port Serial ATA Status No devices connected Link Status 7 USB Link Controller Firmware Version 0 11 4 Y Network FExpressBox Series Firewall Locations Vendor Name Magma Modems Device Name ExpressBox Series Vendor ID 0x19 Volumes Device ID 0x3 WWAN Device Revision x3 Wi Fi UID 0x0019000300004BE0 Y Software Route String 1 Accessibility oe Version 26 3 Applications Status Connected Components Link Status 2 Developer Port Micro Firmware Version 0 2 5 Extensions Cable Firmware Version 0 1 18 Fonts Port Status Connected Frameworks Link Status 2 1
16. surge and noise suppression circuitry built into it ExpressBox 1T Chapter 2 Hardware Installation KE WARNING Do not remove or disconnect any cables from Thunderbolt interface card inserted in the ExpressBox 1T chassis Doing so WILL disable functionality Warning ExpressBox 1T Chapter 2 Hardware Installation Cae o usus oa Extra Power Some PCle cards require extra power There are no AUX power connectors that can be used for providing extra power to cards e mail sales magma com for more information Fan Controller If the PCle cards run hot or are over 20 watts of power Magma recommends adjusting the fan speed to maximum Use the Adjustable Knob located at the bottom of the Card Carrier for adjusting the Fan Speed CAUTION Before touching anything inside the enclosure be sure unit has been off and is cool Beware of touching anything in chassis if unit has been on Cautlon Connect Cables and Turn On Plug in power cord to ExpressBox 1T Attach Thunderbolt cable into either top or bottom port on the ExpressBox 1T Plug in Display Monitor DVI HDMI or Display If no display will be used you can daisy chain other Thunderbolt devices Plug in the other end of the Thunderbolt cable to the Thunderbolt port on the computer ExpressBox 1T Chapter 2 Hardware Installation ESO oo Connect a Thunderbolt cable to one of the ports on the back of the Magma product and connect the other end of Thunderbolt
17. the equipment WARNING Used to indicate and prevent the following step from causing injury DANGER or STOP Used to indicate and prevent the following step from causing serious injury or significant data loss Disclaimer We have attempted to identify most situations that may pose a danger warning or caution condition in this manual However Magma does not claim to have covered all situations that might require the use of a Caution Warning or Danger indicator ExpressBox 1T Preface o Safety Instructions Always use caution when servicing any electrical component Before handling the Magma Expansion chassis read the following instructions and safety guidelines to prevent damage to the product and to ensure your own personal safety Refer to the Advisories section for advisory conventions used in this manual including the distinction between Danger Warning Caution Important and Note Always use caution when handling operating the computer Only qualified experienced authorized electronics personnel should access the interior of the computer and expansion chassis per UL and IEC 60950 1 The power supplies produce high voltages and energy hazards which can cause bodily harm Use extreme caution when installing or removing components Refer to the installation instructions in this manual for precautions and procedures If you have any questions please contact Magma Technical Support WARNING Ne
18. ver modify or remove the radio frequency interference shielding from your workstation or expansion unit To do so may cause your installation to produce emissions that could Warning interfere with other electronic equipment in the area of your system When Working Inside a Computer 1 Before taking covers off a computer perform the following steps 2 Turn off the computer and any peripheral devices 3 Disconnect the computer and peripheral power cords from their AC outlets or inlets in order to prevent electric shock or system board damage In addition take note of these safety guidelines when appropriate To help avoid possible damage to systems boards wait five seconds after turning off the computer before removing a component removing a system board or disconnecting a peripheral device from the computer When you disconnect a cable pull on its connector or on its strain relief loop not on the cable itself Some cables have a connector with locking tabs If you are disconnecting this type of cable press in on the locking tabs before disconnecting the cable As you pull connectors apart keep them evenly aligned to avoid bending any connector pins Also before connecting a cable make sure both connectors are correctly oriented and aligned ExpressBox 1T Preface 4 CAUTION Do not attempt to service the system yourself except as explained in this manual Follow installation instructions closely Cautlon Prot
19. x 1T Y Hardware Card A Type Driver Installed Slot ATA pcila00 1 Other Multimedia No Thunderbolt 105 0 0 Audio Built In pcillaf ef70 P Yes Thunderbolt 106 0 0 Bluetooth pcillaf ef70 Card Reader Diagnostics Disc Burning Ethernet Cards Fibre Channel FireWire Graphics Displays Hardware RAID Yes Thunderbolt 107 0 0 Memory PCI Cards Parallel SCSI Power Printers pci1a00 1 SAS Serial ATA Type Other Multimedia Thunderbolt Driver Installed No USB Tunnel Compatible No MSI No Network Bus PCI Firewall Slot Thunderbolt 105 0 0 Locations Vendor ID Oxla ee Zement Vendor ID rear pets Volumes Subsystem ID 0x0002 WWAN Revision ID 0x0000 Wi Fi Link Width xl Y Software Link Speed 2 5 GT s Applications Components Developer Extensions Fonts Frameworks Logs Managed Client Preference Panes Printer Software JE Julia s MacBook Air Hardware PCI Cards pcila00 1 Q Can I daisy chain ExpressBox 1T with more ExpressBox 1T A Yes but realize that aggregate bandwidth is limited to 10Gbps through the Thunderbolt port and PCI address and IO space can be limited so the type of cards installed in the chassis may limit the number that can be daisy chained successfully If a daisy chain device doesn t work check to see if a RED led on the Magma Thunderbolt Card in the first slot of ExpressBox 1T is on If so the daisy chained device is drawing too much power and the current limiting has kicked in and ha
20. xiliary peripherals such as hard drives into the chassis If however the installation was unsuccessful you may not see the PCI to PCI Bridge or it will have a small yellow symbol in front of it as shown below go to Troubleshooting d Intel R E7520 PCI Express Root Port CO 3599 PCI standard PCI to PCI bridge s Fa PCI standard PCI to PCI bridge Troubleshooting Q If the Thunderbolt card fails to power up what should I check A Check the Standby Power cable make sure it is firmly connected to the power receptacle of the Thunderbolt Interface card Remove and reconnect the Standby Power cable 8 oi Le sl d pE mm Win Je e Ce e r il rte ER mg 7 Standby Power Cable Q How do I know if ExpressBox 1T power supply is working ExpressBox 1T Chapter 3 Verify Installation 18 e EES A If the Thunderbolt card is properly seated and EB1T is connected to Computer that is on and the power cord is plugged in to the power source outlet and to EB1T power receptacle port then you should see the Front BLUE LED is LIT Fan is spinning and 5 green LEDs shown on the Interface card and 3 green LEDs on the backplane 5V MCU 3 3 1 0 DP LEDs on Interface card should be LIT or ON 3 3v PWR 5vAUX LEDs on Backplane should be also LIT or ON 5 Green LEDs on Interface Card CAPR SAT g AN ont ep im E echt pa ff ninn Z aS i e Ve A oT i Se P en Cas SA WE ane Ne H RE E
21. you a Return Merchandise Authorization RMA number Put this number and your return address on the shipping label when you return the item s for service Ship the well packaged product to the address below RMA WUNTRONIC GmbH Heppstrasse 30 D 80995 Munich Germany ExpressBox 1T Chapter A How to Get More Help mm i CO Appendix A Compliance FCC NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his her own expense This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE T
Download Pdf Manuals
Related Search