User Manual - strong>strong>strong>strong>
Contents
1. as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on or next to the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable Remote control transmits a directional infrared beam Ensure to aim the remote control directly at the infrared sensor of the unit during operation If the sensor has been covered or there is a large object between the RCU and sensor or it is exposed to direct sunlight or a strong artificial light fluorescent or strobe light the sensor may not be able to receive the remote signal In this case change the direction of the light or reposition the unit English 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its acce2. In normal viewing mode no menu mode press the FAVOURITE to display a list of favourite programmes 2 Press AW to choose your favourite programme 3 Press OK to select your favourite programme Delete a TV or radio programme 1 Select the programme and then press the BLUE button A message will appear Press OK to delete the programme or Exit to cancel 2 Repeat the previous step to delete more programmes Skip TV or radio programme 1 Select the programme you would like to skip and press the GREEN button The programme will be marked to skip The receiver will skip this programme while zapping between programmes in normal viewing mode 2 Repeat the previous step to skip more programs 3 To confirm and exit the menu press EXIT Disable a skipped TV or Radio programme Press the GREEN button on the programme marked with the skip symbol Move a TV or radio programme 1 Select the preferred programme then press the RED button A move symbol will appear 2 Press AW to move the programme 3 Press OK to confirm 4 Repeat the above steps to move more channels Lock programme You can lock selected programmes for restricted view Lock a TV or Radio Programme 1 Select the preferred programme then press the YELLOW button The programme is now marked as locked 2 Repeat the previous step to select more programmes 3 To confirm and exit the menu press EXIT To view the locked programme you need to enter either the default password 88
3. outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Ventilation Slots and openings They are provided for ventilation to ensure reliable operation of the receiver and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the receiver on a bed sofa rug or heat register This receiver should not be placed in a built in installation such as a book case or rack unless proper ventilation is provided Ensure that free airflow is maintained around the receiver Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fi
4. put 2XAAA size batteries inside the compartment The diagram inside the battery compartment shows the correct way to install the batteries Note The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 6 Using the Remote Control Fig 5 To use the remote control point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver at an angle of up to 60 degrees The remote control will not operate if its path is blocked Note Sunlight or very bright light will decrease the sensitivity of the remote control 3 0 CONNECTIONS 3 1 Connecting to TV Set Fig 6 3 2 Connecting to Digital Audio Amplifier DVD Video recorder Fig 6 4 0 FIRST TIME INSTALLATION After all connections have been made properly switch on TV and make sure the receiver is connected to the main power Then switch on the receiver If you are using the receiver for the first time or restored to factory default the Installation Guide menu will appear on your TV screen Use A W buttons to choose menu item 1 OSD Language Use lt P buttons to select the language of your preference 2 Country Use lt P buttons to select your country of residence 3 Antenna Power Use lt P buttons to set ON OFF Set to ON only if you use active indoor or outdoor antenna If it is set to ON the receiver will supply 5V power to the antenna Please refer t
5. 88 or your last set password We recommend changing of your password from default to any of your preference Disable a locked TV or Radio programme Press the YELLOW button on the programme marked with the lock symbol 6 www strong tv PART 1 o English STRONG DIGITAL TV 5 1 2 EPG Electronic Programme Guide The EPG is an on screen TV guide that shows the program schedule for up to seven days in advance for every tuned channel Press EPG to access the menu Use AY to select the preferred programme If there is more than one page of information use the BLUE button for page up and the YELLOW button for page down To view program schedule on other channels use lt P buttons To book reminder for desired event press OK button To display a list of booked events press INFO button You will find more details about the booking of reminders in chapter 5 4 1 Schedule 5 1 3 Sort Sort your channels from the following options By LCN Sort the channels in channel number order ascending By ONID Sort the channels in order of Network ID Broadcaster ID By Service Name Sort the channels in alphabetical order Service ID Sort the channels according to the station 5 1 4 LCN Logical Channel Numbering Set LCN ON or OFF 5 2 Video Setting Press MENU then select Picture The menu provides options to adjust the video settings Press AW to select an option and press lt P to adjust the setting Press EXIT to exit the menu A
6. STRONG Digital High Definition Terrestrial Receiver SRT 8110 DIGITAL TV Picture similar User Manual www strong tv Figure 1 Figure 2 Figure 3 a HOW DUN w PVR r STANDBY pec INFO DIGITAL lt LIST MUTE 7 gt A SUBTITLE TVIRADIO TTX EXIT 12 WWNNNN NOON AW 1 Open the cover 2 Install batteries 3 Close the cover STRONG ff eey Figure 5 Optional Coaxial Z omy Digital Audio Amplifier Figure 6 DVD Video Recorder PART 1 o English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 2 YOUR RECEIVER 2 1 PIN code default 8888 2 2 Front panel 2 3 Rear panel 2 4 Remote Control 2 5 Installing the Batteries 2 6 Using the Remote Control 3 0 CONNECTIONS 3 1 Connecting to TV Set 3 2 Connecting to Digital Audio Amplifier DVD Video recorder 4 0 FIRST TIME INSTALLATION 5 0 BASIC OPERATIONS 5 1 Program 5 2 Video Setting 5 3 Channel Search 5 4 Time Setting WWKWONNDAAH vu www vup22 gt WWWNN 5 5 Option 5 6 System Setting 5 7 USB 6 0 RECORDING FUNCTION 11 A 1 TROUBLESHOOTING 11 A 2 SPECIFICATIONS 12 Lu E 0180 5 01 49 91 STRONG declares that this item complies with the basic requirements and other relevant L Min ma fom eae net 2 regula
7. Search Install new channels manually This option adds new channels without changing the current channels list 1 Select Manual Search then press OK or The channel search screen will appear 2 Press the lt P to select the channel number or enter the channel number using 0 9 buttons 3 Press OK to start searching channels A found channel will be saved and added to the channels list If channels can t be found then exit the menu Tip Signal quality and level indicators will show presence of the signal on selected channel frequency Country Select your country of residence It is important to set the correct country as some tuning parameters depend on the country Antenna power Enable Antenna Power if an external active antenna is connected 5 4 Time Setting Press MENU select Time The menu provides options to adjust the time settings and allows you to setup scheduled recordings of programmes Press AY to select an option and press lt P to adjust the setting Press EXIT to exit the menu 5 4 1 Schedule In this menu you can setup the schedule for automatic recording or switching to the defined channels at a particular date time Add Press RED button to add a new booking In the appearing dialog select the desired channel type and number the starting date and time end time repeat cycle once daily or weekly and mode view or record Once you set all parameters press OK to store your booking Edit Press GREEN button
8. You can access recordings by pressing button LIST on remote control Also list of recordings can be accessed through Menu USB Multimedia Records Please refer to 5 7 1 Multimedia for details of available functions A 1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer or the local Service Hotline Do NOT open the receiver cover It may cause a dangerous situation and the warranty will get void Problem Possible cause What to do Stand by indicator do not Mains lead unplugged multipoint Check mains lead switch multipoint light up connector switched off connector on Front panel switch is in OFF position Set front panel switch to ON position No signal found Aerial is disconnected Check aerial lead Aerial is damaged misaligned Check aerial Out of digital signal area Check with dealer Active antenna requires to switch ON Switch receiver s Antenna Power ON antenna power external feed connect external feed No picture or sound on TV Input is not selected on your TV Switch to correct TV input TV or VCR are not connected to main Check mains lead Bad cable connection Firmly plug in cables between receiver and TV Scrambled channel message Channel is scrambled Select alternative channel No response to remote Receiver off Plug in and tu
9. You can adjust slide show interval to 1 8 seconds Slide Mode You can adjust slide show effect as mode 0 59 or random Aspect Ratio Keep Displays the picture as its original aspect Discard Displays the picture in full screen mode 5 7 3 Movie configuration Subtitle Specific Small Displays the subtitle as small mode Normal Displays the subtitle as normal mode Big Displays the subtitle as big mode Subtitle BG White Displays the subtitle in white background Transparent Displays the subtitle in transparent background Grey Displays the subtitle in grey background Yellow green Displays the subtitle in yellow green background Subtitle Font Color Red Displays subtitle in red font Blue Displays subtitle in blue font Green Displays subtitle in green font Note STRONG cannot guarantee compatibility operation and or bus power with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit m With large amounts of data it may take longer for the system to read the contents of a USB device m Some USB devices may not be properly recognized Even when they are in a supported format some files may not play or display depending on the content 10 www strong tv PART 1 o English STRONG DIGITAL TV 5 7 4 Record configure Record Device If you have multiple partitions on your storage device select one of them as default part
10. icator Shows power state ofthe receiver green LED receiver is turned on red LED receiver is in standby mode 3 LED display Shows channel number 4 USB To connect external storage devices 5 Remote control sensor Receives the signal from the remote control 6 Channel up down To change channels without using the remote control 2 3 Rear panel Fig 2 1 ANT IN To connect an antenna for reception of broadcasting signal 2 TO TV To connect a TV set or to connect an extra receiver 3 S PDIF COAXIAL To connect to digital audio amplifier 4 TV SCART To connect receiver with your TV set using a SCART cable 5 VCR SCART To connect to a Video or DVD recorder 6 HDMI To connect receiver with your TV set using an HDMI cable 7 POWER CABLE To connect receiver to your main power supply 2 4 Remote Control Fig 3 1 STANDBY To switch to on or standby 2 REC Records the TV program to the connected storage device 3 LIST Displays a list of records available on the connected storage device 4 MUTE To turn the sound on or off 5 EPG To display information about the programme being viewed and what s on next 6 INFO To display information about the programme 7 TTX To open teletext if available on current channel 8 AUDIO To select audio track and output mode 9 DTV VCR Switches to VCR input if it is in DTV state Switches to DTV if it is in VCR state 10 SUBTITLE To select subtitles language out of available ones on current channel 11 MENU To open the
11. ile to playback Music supported file formats are MP3 and WMA Photo supported file formats are JPG and BMP Movie supported video files in various formats MPG MPEG TS VOB MP4 AVI Records to display list of recordings Playback of Movie and Records In the Records menu you will need to select the folder MYRECORD where recordings are stored In Movie menu you have to navigate to the file with movie Select the file and press OK to start the playback in preview mode Use the RED button to switch between full screen view and the list of recordings During playback you can use the playback control buttons such as PAUSE FWD REV STOP Additionally in the list of recordings you can Delete or Rename a recording file To Delete a recording select file with recording and press YELLOW button Confirm file deletion with OK button or cancel it with EXIT button To Rename a recording select the desired file and press GREEN button In appeared dialog you can select the character using the navigation buttons Press OK to choose the character Once you finish inputting the new name navigate to Ok button on screen and press OK on the remote control to store the new name STRONG cannot guarantee the playback of video files although extensions are listed here as it depends on codec used data bit rate and resolution Please consult the STRONG Hotline in your country to get more details 5 7 2 Photo configuration Slide Time
12. ition for recording Format If you would like to format storage device or partition on it select partition and file system to be used Move focus to Format and press OK You will need to confirm format by pressing OK button one more time Format procedure will take some time depends from size of storage device used At the end of process Format is complete message will appear A Warning Format functions will delete all records data and information from your USB device STRONG will not take any responsibility for damaged or lost data on the USB device 6 0 RECORDING FUNCTION To perform a recording you have to insert USB storage device into USB port of the receiver Select a channel you would like to record and press REC button The recording will start and at let upper corner of the screen you will see recording notification with blinking red dot and record duration During a recording you can t change a channel to another one You can check details of the recording in progress by pressing to INFO button To stop a recording press STOP button on remote control Another way of doing recording is use Scheduler please refer to 5 4 1 Schedule of this manual Average record size values are approximately depend from bit rate of actual broadcast MPEG2 SD channel 1 hour take about 2 2 GB space MPEG4 SD channel 1 hour take about 1 GB space MPEG4 HD channel 1 hour take about 4 5 GB space Accessing to the recordings
13. m any format will be converted to PCM format RAW audio from receiver will be send in original format OFF digital audio output disabled 5 6 System Setting Press MENU and select System The menu provides options to adjust the system settings Press AY to select an option and press lt P to adjust the setting Press EXIT to exit the menu Parental Guidance You can restrict access to programs that are unsuitable for children below the set age To restrict lock the channel you will need to enter either the default password 8888 or your own password This function depends from broadcaster It will work only if broadcaster assigns morality levels to the programs according to standards Set Password Set or change the password for locked programs and menu access Enter your old password or the default password 8888 You will then be asked to enter your new password To confirm re enter your new password Once it is confirmed press EXIT to exit the menu Restore Factory Default Reset your Set Top Box to the Default Factory Settings In Main Menu select Restore Factory Default and press OK or to select Enter your password or the default password 8888 and press OK to confirm This option will delete all preset channels and settings The receiver will reboots and start with Installation Guide menu Information View model hardware and software information Software update If the status is set ON it will scan new software fr
14. main menu 2 EXIT To return to the previous screen or menu 3 lt gt Navigates through the menus Increases or decreases volume in live view mode 4 4V Navigates through the menus Selects the next or previous channel in live view mode 5 OK To confirm a selection within a menu 16 FAVOURITE To access your favourite channels 7 TV RADIO Toggles between TV radio modes 8 0 9 NUMERIC BUTTONS To select channel numbers or input numbers in menus 9 RECALL To switch between the last two viewed channels 20 GOTO Selects play time of media 21 44 REV Searches backwards during playback 22 gt gt FWD Searches forwards during playback 23 M4 PREV Skips to previous track during playback 24 bbI NEXT Skips to next track during playback 25 gt PLAY Starts or resumes playback Pauses playback www strong tv PART 1 o English STRONG DIGITAL TV 27 M STOP Stops playback 28 G REPEAT Repeats playback stops repeat 29 RED Flexible functions in OSD MENU and Teletext 30 GREEN In no menu state changes resolution of HDMI output between 1080i 720p and 576i flexible functions in OSD MENU and Teletext 31 YELLOW In no menu state changes aspect ratio and aspect conversion of Video outputs flexible functions in OSD MENU and Teletext 32 BLUE In no menu state displays Schedule menu for easy setup timers flexible functions in OSD MENU and Teletext 2 5 Installing the Batteries Fig 4 Remove the battery cover from the remote control and
15. n condensing Size W x Dx H in mm 220 x 165 x 45 Weight 1 2 kg 04 Mar 2010 13 03 www strong tv
16. ns for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power
17. o the user manual of your antenna 4 Channel Type Use lt P buttons to select FTA ALL If you set FTA the receiver will install only Free To Air channels If you set ALL the receiver will install all available channels available in broadcast 5 Select Search Channel and press or OK to start Auto Scan The receiver will indicate progress of tuning Once channel tuning is completed the receiver will tune to the first channel in the list You are ready to watch TV www strong tv 2 STRONG PART 1 English DIGITAL TV 5 0 BASIC OPERATIONS 5 1 Program Press MENU and select Program using lt P buttons Press OK or W button to edit program settings Press EXIT to exit the menu 5 1 1 Program Edit To edit your programme preferences lock skip favourite move or delete please go to Programme Edit This Menu requires a password to access Enter your password or use the default password 8888 if you did not change it Set favourite programme You can create a shortlist of favourite programmes that you can easily access 1 Select the preferred programme then press the FAVOURITE button A heart shaped symbol will appear and the programme is marked as a favourite 2 Repeat the previous step to select more favourite programmes 3 To confirm and exit the menu press EXIT Disable favourite TV or radio programme Press FAVOURITE button on the remote control on the programme with the heart shaped symbol View favourite programme 1
18. om broadcast according to your preferred time in Start time Software update from USB Download the required update file for your receiver model from our website http www strong tv support page or contact to your local dealer Unzip file if necessary and copy it to root folder of your USB storage device Connect USB storage device to the USB port of the receiver Enter to the main Menu select USB Select Multimedia Music and press OK In the file list select file with software image and press OK to start software update Update process will take some time Once update is completed the receiver will display message Update completed Please restart Switch OFF main power and switch it back ON A WARNING Do not power off your receiver during update process and flashing data Do not unplug the USB Pp y gup p amp plug device during update This may cause damage of the data in the flash memory and the receiver will need to be repaired 5 7 USB Press MENU and select USB The menu provides options to playback music and photo files Supported are MP3 WMA JPEG BMP files The unit supports USB devices with FAT and FAT32 file systems www strong tv STRONG PART 1 English DIGITAL TV 5 7 1 Multimedia If there is no USB device plugged in a warning message No USB Device is Found will be displayed Otherwise you can select the Music Photo Movie or Recordings in this menu and press OK to enter the file browser and select the f
19. rbox 16 9 Frame rate 25 Hz for PAL 30 Hz for NTSC Video resolution 576p 720p 1080i Audio Decoder Audio decoding MPEG 1 Layer 1 amp 2 Dolby Downmix Audio mode Mono L R Stereo AC 3 Frequency response 20 kHz 2 dB 60 Hz 18 kHz lt 0 5 dB Sampling rate 32 44 1 48 kHz Tuner DVB T Connector type Frequency range Female IEC60169 2 75 Ohm nominal VHF 174 MHz to 230 MHz UHF 470 MHz to 860 MHz Signal level 32 dBm 25 dBm COFDM spectrum COFDM 2K 8K Carrier Antenna supply 5 V DC max 50mA overload protected System amp Memory CPU MSD7828 Flash memory 4 Mbytes System memory 128 Mbytes Multimedia Video playback supported in various formats MPG MPEG TS VOB MP4 AVI Audio playback MP3 WMA formats Picture view JPG BMP formats STRONG cannot guarantee the playback of video files although extensions are listed here as it depends on codec used data bit rate and resolution Connectors ANT IN TO TV TV SCART RGB CVBS Audio L R Output with Volume control VCR Scart CVBS Audio L R HDMI V A Output Type A Version 1 0 S PDIF Dolby Digital Out Coaxial USB 2 0 Type A Connector General Data Input voltage range 100 240 V AC 50 60 Hz Power consumption max 8 W Power consumption in standby 0 60 W without external storage device Operating temperature 0 C 40 C Storage temperature 10 C 50 C Operating humidity range 10 85 RH No
20. re or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water www strong tv PART 1 o English STRONG DIGITAL TV 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required make sure that the authorized service centre uses only parts with the same characteristics as the originals
21. rn on plug control Handset not aimed correctly Aim handset at IR sensor IR sensor obstructed Check for obstructions Hand set batteries exhausted Replace handset batteries Forgotten channel lock code Contact local Service Hotline or send email to our Support via www strong tv Forgotten menu lock code Contact local Service Hotline or send email to our Support via www strong tv www strong tv 11 STRONG PART 1 English DIGITAL TV Problem Possible cause After moving the receiver to another room you are no longer able to receive digital reception received by the box The aerial feed former new point may come through a distribution system which may reduce the digital signal now What to do Try a direct feed from the antenna Record not performed device supported The USB storage device is not connected There is no free space on the storage The USB storage device format is not Make sure a storage device is connected Delete some data from the storage device and try again Make sure your USB storage device is formatted in FAT or FAT32 file system A 2 SPECIFICATIONS Demodulator DVB T Modulation COFDM Demodulation QSPK 16 64QAM IF bandwidth 7 or 8 MHz Guard interval 1 4 1 8 1 16 1 32 Code rate 1 2 2 3 3 4 5 6 7 8 Video Decoder Profile level MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Input rate Max 90 Mbit s Aspect ratio 4 3 Pan amp Scan Lette
22. spect Ratio You can set the display format to either 4 3 PanScan 4 3 Letter Box 16 9 Full Screen or Auto to get the maximum display when watching TV Tip you can change the video output format directly from view mode by pressing the YELLOW button on the remote control Resolution Ifthe video does not appear correctly change the setting These settings match the most common settings for HDMI 480i for NTSC system TV 480P for NTSC system TV 576i for PAL system TV 576P for PAL system TV 720P for NTSC or PAL system TV 10801 for NTSC or PAL system TV Tip you can change the video resolution directly from view mode by pressing the GREEN button on the remote control TV format If the video does not appear correctly you need to change the settings This should match the most common setting for TVs in your country NTSC for NTSC system TV PAL for PAL system TV Video output CVBS CVBS output RGB RGB output 5 3 Channel Search Press MENU and select Search Channel The menu provides options to adjust the search channel settings Select an option and press lt P to adjust the setting Press EXIT to exit the menu www strong tv 7 STRONG PART 1 English DIGITAL TV Auto Search Search and install all channels automatically This option overwrites all previously installed channels 1 Select Auto Search and press OK or P to start channel search 2 To cancel channel search press EXIT Manual
23. ssories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Refer to the user manual of your TV and your antenna m Make sure that the Audio Video connectors and outdoor components of the antenna are in a good condition and the Audio Video connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates a warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control Bold Character Move to Represents a menu item within a window Italic Character 1 4 Accessories m 1 User Manual m 1 Remote control unit m 2x Batteries AAA type Note The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control www strong tv 2 STRONG DIGITAL TV 2 YOUR RECEIVER 2 1 PIN code default 8888 PART 1 o English 2 2 Front panel 26 II PAUSE Fig 1 1 Power button To turn ON OFF the main power supply 2 Standby ind
24. tions of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC l 0820 400 150 g Subject to alterations In consequence of continuous research and development technical 5 0 12 Min from Austrian wired line specifications design and appearance of products may change All product names are a trademarks or registered trademarks of their respective owners ti 0826 029 928 STRONG 2009 All rights reserved 03 2010 a 0 14 Min from French wired line www strong tv STRONG PART 1 English DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions This receiver has been manufactured to satisfy international safety standards Please read the following recommended safety precautions carefully The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructio
25. to edit an existing booking Delete Press BLUE button to delete a booking from the list Tip If you have scheduled recordings make sure to have an external storage device connected to the receiver Check periodically if free space is available on the storage device for future recordings Time Offset Select auto or manual for GMT offset adjustments Country Region Select the Country Region when Time Offset is set to Auto Time Zone Select the Time Zone Offset when Time Offset is set to Manual Sleep This function will switch the receiver to standby when it doesn t receive any commands for a given period of time When this option is set to OFF the function is disabled Please set the time after which the receiver should go to stand by or select OFF to disable this function 5 5 Option Press MENU and select Option In this menu you can to adjust the OSD Language Subtitle Language Audio Language and Digital Audio mode Select an option and press lt P to adjust the setting Press EXIT to exit the menu www strong tv PART 1 o English STRONG DIGITAL TV OSD Language Select the preferred language of On Screen Display Subtitle Language Select the preferred subtitle language Audio Language Select the preferred audio language for watching TV channels Ifthe language is not available the default programme language will be used English Digital Audio Select digital audio output mode PCM audio fro
Download Pdf Manuals
Related Search