19” LED Tube Controller
Contents
1. FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations PN With a dangerous voltage you can suffer PN a dangerous electric shock when touching the wires Before your initial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device To maintain perfect condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual Please consider that damages caused by manual modifications to the device are not subject to warranty This device contains no user serviceable parts Refer servicing to qualified technicians only IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the device e Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Never look directly into the light source Never leave any cables lying around Do not open the device and do not modify the dev2. 19 LED Tube Controller ORDERCODE 41003 LED TubP Controller PRO r OMX CONTROLLER WITH AGR FUNCTION e Version 6 0 SHOWELECTRONICS FOR PROFESSIONALS Congratulations You have bought a great innovative product from Showtec The Showtec 19 LED Tube Controller brings excitement to any venue Whether you want simple plug amp play action or a sophisticated DMX show this product provides the effect you need You can rely on Showtec for more excellent lighting products We design and manufacture professional light equipment for the entertainment industry New products are being launched regularly We work hard to keep you our customer satisfied For more information iwant showtec info You can get some of the best quality best priced products on the market from Showtec So next time turn to Showtec for more great lighting equipment Always get the best with Showtec Thank you Showtec Showtec 19 LED Tube Controller Product Guide Ur Te Tr e EE Safety instructions Operating Renn le EE Ne le de ER OS E E ER E E E A Overview Backside Installation Set Up and ODA nd ne SETAE ELDIN enee DMX controlled Set Up Example Maintenance ss ss ERE ERE REEL ER Troubleshooting Product Specifications i ee ERE SER nere in RAK A NN 01 WARNING CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing
3. device will start test mode Press MODE button to enter mode setting 2 Switch to System Mode then press the Set Up button Enter the amount of tubes you are using 3 For DMX Controlled you have to use DMX Channel 1 509 then press the Set Up button again 4 The LCD now shows Set Address YES press SETUP Button NO to keep your previous settings or YES Right Up Button to store your choice 5 Now your unit is DMX Controlled You will find all the pre programmed scenes below Channel 1 Colors Blackout 10 19 20 298 30 39 40 49 Blue 50 59 Magenta 60 69 Cyan 70 79 White 80 89 Color Change Speed and Flash adjustable 90 99 Slow Flow 1 Speed and Flash adjustable 100 109 Slow Flow 2 Speed and Flash adjustable 110 119 Roll Chase 1 Speed and Flash adjustable 120 129 Roll Chase 2 Speed and Flash adjustable 130 139 Multi Color Speed and Flash adjustable 140 149 Fast Flow 1 Speed and Flash adjustable 150 159 Fast Flow 2 Speed and Flash adjustable 160 169 2 Color Chase Speed Flash and Color Combination adjustable 170 179 2 Color Flow Speed Flash and Color Combination adjustable 180 189 Color Fade Speed Adjustable 190 255 Auto Run Green Yellow Channel 2 Setting of Speed Flash or Color combinations 80 159 160 255 Color combinations only available with 2 Color Chase and 2 Color Flow Channel 3 Adjustment 0 100 of Channel 2 adjustment Speed Flash or Color Chase or Color Flow 0 25
4. 5 Adjust the Speed Flash or Color from 0 255 0 100 The Next settings are only adjustable wnen CH1 160 169 or 170 179 are active 2 Color Chase 2 Color Flow 8 Channel 4 Dimmer of RGB Mode 0 255 0 100 dimmer for RGB Mode Channel 5 RGB Mode For RGB Mode the Channel has to be set to 255 100 to be active Otherwise there will be no RGB Mode When you activate RGB Mode the Channels are Channel 1 Red Channel 2 Green Channel 3 Blue Channel 4 Dimmer 0 100 Set Up Example Power Cable max 5m LED PSU 41001 KN LEO TubE Controller PRO Cable max 5m Power Ech LED PSU 41001 Power OUT FE EC SES ee Max 8 Tubes per PSU LED PSU 41001 Cablejmax 5m U Maintenance The Showtec 19 LED Tube Controller requires almost no maintenance However you should keep the unit clean Disconnect the mains power supply and then wipe the cover with a damp cloth Do not immerse in liquid Do not use alcohol or solvents Keep connections clean Disconnect electric power and then wipe the DMX and audio connections with a damp cloth Make sure connections are thoroughly dry before linking equipment or supplying electric power Troubleshooting Showtec LED Tube Controller This troubleshooting guide is meant to help solve simple problems If a problem occurs carry out the steps below in sequence until a solution is found Once the unit ope
5. Button gt settings by using the right Up Down button E E ve After completing your settings be sure to unplug the tubes the controller and the PSU otherwise errors could occur This way you reset the entire system but your settings keep stored in the memory of the controller 5 D 5 c Black out Static RED Static BLUE Static CYAN Static WHITE Color Change 10 Slow Flow 1 11 Slow Flow 2 12 Roll Chase 1 OO JGG P GM 13 Roll Chase 2 14 Multi Color 15 Fast Flow 1 16 Fast Flow 2 17 2 Color Chase 18 2 Color Flow 19 Color Fade 20 Auto Run Static GREEN Static YELLOW Static PURPLE Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set Function Set 21 System Mode When Function Set appears in the LCD then you are able to make some extra settings Run Speed Flash Freq etc 9 Color Change 10 Slow Flow 1 11 Slow Flow 2 12 Roll Chase 1 13 Roll Chase 2 14 Multi Color 15 Fast Flow 1 16 Fast Flow 2 Function Set Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Fla
6. ice Do not connect this device to a dimmerpack Do not switch the device on and off in short intervals as this would reduce the system s life Only use device indoor avoid contact with water or other liquids Avoid flames and do not put close to flammable liquids or gases Always disconnect power from the mains when device is not used or before cleaning Only handle the power cord by the plug Never pull out the plug by tugging the power cord e Make sure that the device is not exposed to extreme heat moisture or dust e Make sure that the available voltage is not higher than stated on the rear panel e Make sure that the power cord is never crimped or damaged Check the device and the power cord from time to time e If device is dropped or struck disconnect mains power supply immediately Have a qualified engineer inspect for safety before operating e If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature e If your Showtec device fails to work properly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Showtec dealer for service e For replacement use fuses of same type and rating only e Repairs servicing and electric connection must be carried out by a qualified tech
7. nician e WARRANTY Till one year after date of purchase CAUTION EYEDAMAGES AN Avoid looking directly into the light source meant especially for epileptics OPERATING DETERMINATIONS If this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit burns electric shock lamp explosion crash etc You endanger your own safety and the safety of others Improper installation can cause serious damage to people and property Rigging Please follow the European and national guidelines concerning rigging trussing and all other safety issues Do not attempt the installation yourself Always let the installation be carried out by an authorized dealer Procedure e fa LED tube is lowered from the ceiling or high joists professional trussing systems have to be used e Mount the LED tube to the trussing system e The LED tube must never be fixed swinging freely in the room e The installation must always be secured with a safety attachment e g an appropriate safety net or safety cable e When rigging derigging or servicing the LED tube always make sure that the area below the installation place is blocked and staying in the area is forbidden Improper installation can cause serious damage to people and property Description of the device Features The 19 LED Tube Contr
8. oller is designed for the more demanding user e 5 DMX Channels e Controllable DMX or Stand alone controller e 1 Output 1000 Tubes can be controlled DMX IN and DMX OUT Overview Fig 1 1 ON OFF 2 Mode Up Change the pre programmed modes 3 Mode Down Change the pre programmed modes 4 Set Up Change the settings of the pre programmed modes Speed Flash Colors 5 Adjust Down Decrease the DMX address or program options 6 Adjust Up Increase the DMX address or program options Backside Fig 2 7 3 pin DMX OUT connector XLR female socket used to send DMX signals 8 3 pin DMX IN connector XLR male socket used to receive DMX signals 9 Output to LED Tube 10 Power 12V DC Installation Remove all packing materials from the LED Tube Controller Check that all foam and plastic padding is removed Connect all cables Power supply and Signal connection The first LED Tube is directly connected to the power source LED PSU ordercode 41001 should be connected between every 8 tubes Note It s necessary to insert a XLR termination plug with 120 Ohm in the last fixture in order to ensure proper transmission on the DMX data link Do not supply power before the whole system is set up and connected properly Always disconnect from electric mains power supply before cleaning or servicing Damages caused by non observance are not subject to warranty A Set Up and Operation Follow the directions below a
9. rates properly do not carry out following steps 1 If the device does not operate properly unplug the device 2 Check power from the wall all cables the fuse etc 3 If all of the above appears to be O K plug the unit in again 4 If nothing happens after 30 seconds unplug the device 5 Return the device to your Showtec dealer 10 Product Specification Model Showtec 19 LED Tube Controller 41003 D A Voltage AC 230V 50Hz CE gt tee te Senta ona 2 Input Voltage 9 12V 500mA external adapter ee Dimensions 482 6 1HE x 101 7 x 46 mm LxWxH Weight 1 14 kg N Model Showtec LED Tube 41000 Dimensions incl mountingplate 1002 x 50 x 80 mm LxWxH Dimensions excl mountingplate 1002 x 50 x 70 mm LxWxH Weight 1 12 kg Model Showtec LED Cove 41005 Dimensions 1000 x 40 x 45 mm LxWxH Weight 0 8 kg Model Showtec LED PSU 41001 Dimensions 320 x 140 x 70 mm LxWxH Weight 2 32 kg MW Design and product specifications are subject to change without prior notice LE 11 2006 Showtec
10. s they pertain to your preferred operation mode Before plugging the unit in always make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power or vice versa You can operate this device as 1 Stand alone unit 2 DMX controllable After completing your settings be sure to unplug the tubes the controller and the PSU otherwise errors could occur This way you reset the entire system but your settings keep stored in the memory of the controller Stand alone 1 Turn the power switch on The device will start test mode 2 Press MODE button to enter mode setting 3 Switch to System Mode then press the Set Up button 4 Enter the amount of tubes you are using 5 For Stand alone you have to use DMX Channel 0 then press the Set Up button again 6 The LCD now shows Set Address YES press SETUP Button NO to keep your previous settings or YES Right Up Button to store your choice The LED Tubes will light up Now your unit is a stand alone You will find all the pre programmed scenes below als Press the Setup Button gt Press the Setup Button N gt You can change your settings by using the right Up Down button YES Right UP Button and the tubes light up aal YES Rett UP gt You can change your settings by using the right Up Down button gt Press the Setup Button gt gt Press the Setup
11. sh Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Return to the Mode Menu 6 17 2 Color Chase 18 2 Color Flow 19 Color Fade 20 Auto Run 21 System Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Function Set Mode Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Color Sort 0 20 3X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Flash Freq 0 100 2X Set Up Color Sort 0 20 3X Set Up Return to the Mode Menu Run Speed 0 100 1X Set Up Return to the Mode Menu Unit Times 0 20 Return to the Mode Menu Start Address 0 1000 1X Set Up Set Address YES Right UP Button NO SETUP Button 2X Set Up Tube Amount 0 1000 3X Set Up DMX Channel 0 509 4X Set Up Return to the Mode Menu In menu 17 and 18 you are also able to change the color of the chase or flow There are 20 available color varieties DMX Controlled 1 Turn the power switch on The
Download Pdf Manuals
Related Search