VEF TA-422 en
Contents
1. 00 represent the MONTH DATE TIME CLOCK MINUTE will illuminate on the LCD and 1 will flash press UP or DOWN to edit the DATE then press SET to confirm and carry on the next step set the TIME CLOCK MINUTE Then the LCD automatically changes the week of that day SET TIME The digit for 1 M 1 D 00 00 represent the MONTH DATE TIME CLOCK MINUTE will illuminate on the LCD and will flash press UP or DOWN ito edit the first digit of TIME CLOCK then press ISET to confirm and carry on the next step set the second digit of TIME CLOCK 0 will flash press UP or DOWN to edit the second digit of TIME CLOCK then press SET to confirm and carry on the next step set the first digit of TIME MINUTE 0j will flash press UP or DOWNI to edit the first digits of TIME MINUTE then press SET to confirm and carry on the next step set the second digit of TIME MINUTE 0 will flash press UP or DOWN to edit the second digit of TIME MINUTE then press SET to confirm and carry on the next step AREA CODE setting SETTING THE AREA CODE LCD will display SET 2 CODE press SET to enter the set mode LCD will display CODE and will flash to indicate to set AREA CODE Press UP or DOWNI to adjust the AREA CODE number an2. Talk with the other end 2 When finished return the handset to the cradle Switch to the speakerphone 1 When using handset press 4 key then return the handset to the base 2 When finished press 4 key again From Speaker phone 1 When the unit rings press 4 key talk to the other end 2 When finished press 4 key again NOTE To receive the Caller ID message correctly please answer a call after the telephone rings two times MAKING CALLS Using Handset Pick up the handset then you will hear dialing tone Press the desired number The LCD will display the call duration time after 6 seconds When finished return the handset to the cradle Using Speaker Phone Press 4 key you can hear dialing tone Dial the desired number Talk to the other end When finished press 4 key again PAUSE Pressing this button will insert a time gap of 3 6s between two digits Redial If line is engaged Press REDIAL key for redial The telephone will dial the pre telephone No automatically After check the incoming or out going number press REDIAL key it will automatically call back FLASH Press FLASH key to use to transfer phone calls when you are using a telephone exchange PABX HOLD ON MUSIC To keep the line engaged while doing ot
3. connects to telephone line Plug coiled cord into handset modular jack Plug the other end into the jack at the left side of the telephone Caller ID function is available only after you apply this service to the local telecom bureau SYSTEM SET UP The key lock should be put at LOCK OFF position red point during all the set up procedure At on hook state press SET to enter the set at this time LCD will display the item to set You can press UP or DOWN to select the different item you would like to set up When you choose one item press SET again to go into the setting and use UP or DOWN to change the different setting When finished press SET to go into the next item setting You can leave the set up mode at any time with DEL key The detailed setting steps to set is followed SETTING THE DATE SET YEAR Press the SET button LCD will display SET 1 DATE press SET again to enter the setting date mode The digit for year 2004 represents the YEAR will illuminate on the LCD and 04 will flash press UP or DOWN to edit the YEAR then press SET to confirm and carry on the next step set the MONTH SET MONTH The digit 1 M 1 D 00 00 represent the MONTH DATE TIME CLOCK MINUTE will illuminate on the LCD and i will flash press UP or DOWN to edit the MONTH then press SET to confirm and carry on the next step set the DATE SET DATE The digit for 1 M 1 D 00
4. the DEW key After that press REDIAL to dial out DELETE FUNCTION Inset mode DEU key is used to quit set When you use pre dial function DEQ is used to correct the input mistake When you check the incoming call memories DEL key is used to delete the unwanted memory If you press DEL key and do not release for more than 4 seconds all memories will be deleted When you check the dialed call memories DEQ key is used to delete the unwanted memory If you press DEL key and do not release for more than 4 second all memories will be deleted Digital regulation of the hand free volume Press 4 key to hook off press the VOL key to regulate the hand free volume by 2 step shows HFVOL1 or HFVOL2 on LCD respectively Setting the ringer volume The ringer volume switch is located at the base of the telephone You can choose between H and L LOCK The telephone has a two step lock to restrict dialing When you turn the key to the green point the number headed with 0 cannot be dialed When you turn the key to the red point no lock
5. INSTRUCTIONS Thank you for your purchasing our newest telephone with Caller ID_function This manual is designed to familiarize with your phone To get the maximum use from this product we suggest that you read this Instruction Manual before operating it FEATURES VEF TA 422 FSK DTMF dual system auto switch FSK message auto adjusts time 16 digits LCD displays incoming number date time and total incoming calls Intelligent back light LCD Local area code setting Real time clock display Flash Pause Hold Pulse Tone Ringer Hi Low Volume Hi low IN USE LED Two LINE jacks IP function Alarm clock Conversation time display WOO hoo Hand free dial and speak conversation time display BOO DOWN Ho HOLD o Outgoing dialed number and conversation time review and redial back Fast checking the incoming call by calling number and calling date amp time On hook pre dial and edit dialing number Two ways key lock Lock 0 Lock off IN USE Q _ INUSE FLASH Q FLASH REDIAL Q REDIAL O DOWN OUT UP HOLD SET DEL PARTS CHECKING LIST User s Manual Base Handset Straight Line Cord Coiled Cord Key 2pcs IMPORTANT SAFETY INSTRUCTIONS When using your telephone please follow this basic safety precaution to reduce the risk of fire electric shock or injury to persons
6. Read and understand all instructions Follow all warning and instruction marked on the products Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol clears Use a damp cloth for cleaning Do not use this product near water for example near a bath tub kitchen sink or swimming pool Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the products Never spill liquid of any kind on the products To reduce the risk of electric shock do not disassemble this product If service or repair works required contact your local customer service center Do not use the telephone to report a gas leak in the vicinity of the leak LCD DESCRIPTION NEW is illuminated when the call comes the first time new call After the new call is reviewed it will disappear REP is illuminated when the call comes in over one time the time showed on the LCD is the last calling time OUT is illuminated when the out going call is checked NOTE Do not expose LCD in the sun for long time INSTALLATION This phone requires 3 AA sized 1 5V batteries Open the battery compartment cover and insert the batteries in the right polarity then close the cover When you find the LCD becomes very dark and some function is not correct please change the batteries Plug line cord into jack at the rear of the telephone base the other end of the line cord
7. according to your requirement Press SET to confirm If you choose STEAL ON you need to install the batteries SETTING ALARM COLCK LCD will display SET 7 ALERT press SET to enter the set mode LCD will display 1 00 00 OFF total 3 alarm clocks selectable Use UP DOWN to make your choice and then press SET There are altogether 3 alarm clocks that can be set at different hours The setting would be not shown when the option of hand free is off SET LCD CONTRAST LCD will display SET 8 LCD press SET key to enter then the LCD will display LCD 4 press UP or DOWN to adjust from LCD1 to LCD5 press DEL key to exit RESET AUTO IP FOR EXAMPLE Reset AUTO IP1 on hook state inout 1 01234 the AUTO IP will be set as 01234 Reset AUTO IP2 on hook state inout 2 01234 the AUTO IP will be set as 01234 SET MANUAL IP There are IP1 and IP2 keys on the keypad when the LCD displays pre dialing number that you want to be IP number press SET key and then press IP1 or IP2 the number which shown on the LCD will be saved as IP1 or IP2 When the manual IP is set on hook state press IP1or IP2 key the telephone will auto dial out the number of IP1 or IP2 When the LCD display the pre dialing number incoming or outgoing number press IP1 or IP2 key to call back the telephone will dial the number in IP1 or IP2 before the number which shown on the LCD The manual IP only is available when the telephone is set as no lock From Handset 1 Pick up the handset
8. d press SET to confirm Repeat this operation to the last digit You only need to set 5 digits if it is in 4 digits you need to press SET twice to exit SETTING PABX OUT CODE LCD will display SET 3 PCODE press SET to enter the set mode LCD will display PCODE and will flash to indicate to set PABX OUT CODE Press UP or DOWN to adjust the PABX OUT CODE number and press SET to confirm Repeat this operation to the last digit You only need to set 2 digits if it is in 1 digits you need to press SET twice to exit SET AUTO IP LCD will display SET 4 AUTO IP press SET to enter and then LCD will display AUTO IP On press UP or DOWN to chose AUTO IP_ on or off when chose AUTO IP ON press SET key to enter the LCD will display 17909 and the right up corner will display IP1 press UP or DOWN key to chose from IP1 to IP2 IP1 is fixed 17909 and can not be revised when LCD display IP2 on the right up corner you can input the IP2 number as you like then press SET key to confirm The AUTO IP function is only available when telephone is set at no lock SETTING DIALING MODE LCD will display SET 5 P T press ISET to enter and then LCD will display TONE or PULSE press UP or DOWN to change to PULSE or TONE if you wish and then press SET to confirm SET ANTI STEAL DIALING FUNCTION LCD will display SET 6 STEAL press SET to enter and then LCD will display STEAL OFF press UP or DOWNI key to adjust from STEAL OFF to STEAL ON
9. her working 1 Press HOLD key and return the handset to the base The other end will hear music 2 Pick up the handset or press 4 key you can continue talking with the other end RECEIVING THE CALLER ID NUMBER When receiving a phone call the telephone will detect the FSK format and display the calling number If this is a FSK format caller ID signal the current date and time display will also be updated If this is a newly coming call the NEW icon will be displayed If the incoming call is a repeated number the REP icon will be displayed If the incoming call is a private call the icon P will be displayed If the incoming call is out of area the icon O will be displayed If a wrong number comes in the E will be displayed You can use UP or DOWN key to check the incoming call information including number date and time press UP or DOWNI key over 3 seconds you can check the incoming calls very fast and you can directly dial back with REDIAL key If you call back a local call press REDIAL one time If you call back a long distance call and the coming call is not headed with 0 or the long distance code number press REDIAL twice Dialed numbers check You can check the outgoing dialed numbers and the conversation time with the OUT key If you want to dial that number again directly press REDIAL key Pre dial function At on hook state you can key in the calling number and edit the input mistake with
Download Pdf Manuals
Related Search