NICK NRG 801 User manual rel 1.0 Eng
Contents
1. 25 DMX CHANNEL 6 Parameter PAN FPR Active only on units with FPR system on board DMX range Mid Point Move Range Mode Option Function Value DMX degrees value 000 010 Position mode 540 standard path 011 020 Position mode 360 1 turn 021 030 Position mode 720 2 turns 031 040 Position mode 1080 3 turns 041 050 Position mode 1440 4 turns 051 060 Position mode 1800 5 turns 061 070 Position mode 2160 6 turns 071 080 Position mode 2520 7 turns 081 090 Position mode 2880 8 turns 091 100 Position mode 3240 9 turns 101 110 Position mode 3600 10 turns 111 120 Position mode 360 smart path 121 182 Forward spin rotation speed from max to min 183 193 Stop 194 255 Reverse spin rotation speed from min to max DMX CHANNEL 7 Parameter NO FUNCTION DMX range Mid Point Move Range Mode Option Function Value DMX degrees value 000 255 NO FUNCTION DMX CHANNEL 8 Parameter SHUTTER DMX range Mid Point Move Range Mode Option Function Value DMX degrees value 000 009 Black out 010 019 Open 020 029 Black out 030 119 Strobe from 3 27 s to 30 ms 120 149 Pulse up from 42 6 s to 120 ms 150 179 Pulse down from 42 6 s to 120 ms Random strobe Dimmer Red 180 204 Green Blue White channels active Full2. it features a remarkable balance between performance and power consumption a mere 200W NICK NRG 801 is also available with the FPR system patent pending which enables limitless pan rotation in both directions with no need for inversion NICK NRG 801 is suitable for a range of top professional applications such as television concerts events etc D T S Product Codes 03 LDR012 F NICK NRG 801 FC BLACK 03 LDR012 FFP NICK NRG 801 FC FPR BLACK 03 LDR012 FWS NICK NRG 801 FC WIRELESS BLACK 03 LDR012 FFPWS NICK NRG 801 FC FPR WIRELESS BLACK 03 LDR012 FW NICK NRG 801 CT BLACK 03 LDR012 FWFP NICK NRG 801 CT FPR BLACK 03 LDR012 FWWS NICK NRG 801 CT WIRELESS BLACK 03 LDR012 FWFPWS NICK NRG 801 CT FPR WIRELESS BLACK LED Technology NICK NRG 801 FC 14 x FULL RGBW LEDs NICK NRG 801 CT 14 x FULL WHITE LEDs Optical group 8 50 linear motorized zoom with high efficiency optical system Uniform projection on surfaces from very wide Wash to PC Beam Colour generation 16 million colours Wide palette of pure uniform whites with variable linear colour temperature 2700 K 8000 K Interface Control Programming Multi function OLED graphic colour display 4 soft keys control management monitoring of the main parameters Controlled via DMX 512 and RDM standard digital communication protocols RDM Wireless ready Internal operating system updatable via D T S RED BOX interface via D T S
3. 120 ohm resistor between pin 2 and 3 The DMX terminator must be plugged into the last unit DMX out panel connector of the DMX line PLACE A 120 OHM RESISTOR BETWEEN PIN 2 AND 3 OF A MALE XRL CONNECTOR AND PLUG IT INTO THE DMX OUT PANEL CONNECTOR OF THE PIN 3 LAST UNIT CONNECTED TO THE DMX LINE l 120 ohm PIN 2 13 11 1 DMX Addresses NICK NRG 801 can be controlled with 20 DMX channels In order to use the unit in 20 channels set the following addresses on the mixer Projector 1 A001 Projector 2 A021 If you want to select the next projector just add 20 Projector 3 A041 A projector 6 A101 11 2 Selecting the DMX address 1 Press the UP DOWN key until you reach the required DMX channel The numbers on the display will start to flash but the new DMX address hasn t yet been set 2 Press ENTER to confirm your selection The numbers on the display will stop flashing and the projector is now setted to the new DMX address TRICKS if you keep pushed the UP or DOWN keys the channels are calculated more quickly and you get a faster selection 12 FIRMWARE UPDATING To update the software version of the NICK NRG 801 you need D T S RED BOX interface D T S Code 03 LA 008 USB DMX Driver for the D T S RED BOX interface D T S Firmware upgrade utility program installed on PC Latest software release available for NICK NRG 801 unit Updating the software version Pleas
4. AA DISPLAY STANDBY OFF MENU ENTER DOWN Display Standby To turn off the display after 30 seconds or leave it always on E DMX Set E ss DMX SET DMX MODE MACRO DIMMER DELAY DMX MODE DMX Mode 20 channels 20 ch With FAR MENU ENTER DOWN MACRO Macro Mode DMX SET STD Standard Default EXT Extended enable rainbow effects on Macro channel DMX ch 16 MACRO STD MENU ENTER DOWN DIMMER DELAY Dimmer channel reaction Delay to DMX Range OFF 2 Seconds DMX SET DIMM DELAY OFF MENU ENTER DOWN MENU ENTER DOWN UP UP Display Position ON THE GROUND Default SUSPENDED Display Standby OFF Display Standby disabled Default ON Display goes OFF after 30 seconds ENTER DMX Mode 20 channels ENTER MACRO STD Standard mode enabled Default EXT Extended enable rainbow effects on Macro channel DMX ch 16 DIMMER DELAY Range OFF 2 seconds Default OFF No Delay 13 DISPLAY FUNCTIONS LED Menu Up Down RGBW MINIMUM VALUES This menu allows to select the minimum levels for Red Green Blue and White RGBW MAXIMUM VALUES This menu allows to select the maximum levels for Red Green Blue and White These settings have priority on Master Dimmer DMX channel 9 SMOOTH VALUE This menu allows to select the value of the delay in milliseconds for RGBW and Dimmer channels reaction to DMX or Program variation 4 25 ms delay Fast
5. MENU ENTER DOWN LED BOOST ON MENU ENTER DOWN AUTO SURE Menu NO Enter YES MENU ENTER DOWN AUTO PROGRAM STEP 01 16 MENU ENTER DOWN UP AUTO PERS COL RED 120 MENU ENTER DOWN UP AUTO RAINBOW SPEE 0010 MENU ENTER DOWN UP GAMMA CORRECTION Linear Linear current output Quadratic Linear light output default ENTER OUTPUT FREQUENCY Range 610 Hz 10 KHz Default 610 Hz BOOST With BOOST active the LED s current is set to 1000 mA 30 more gain Default Enabled ENTER By setting all the units connected to the MASTER to DMX address 1 them will be synchronized with the Master unit following the chase selected on it including TIME WAIT Pan amp Tilt and Zoom position of the MASTER unit 13 DISPLAY FUNCTIONS FIXED COLOURS Sixteen Colour Macros as on MACRO channel Dimmer Shutter Pan Tilt and Zoom values selectable by user WHITE MACROS Sixteen macros for White color from 2700 K to 8000 K Dimmer Shutter Pan Tilt and Zoom values selectable by user IS IS SLAVE ISP Menu Up Down ENTER Up Down SLAVE MODE SETTING This menu allows to set the NICK NRG 801 as slave unit DMX signal must be present from MASTER nnit set in AUTO MODE in order to ran the units in SLAVE mode By setting all the SLAVE units connected to the MASTER to DMX addess 1 them will be synchronized with the Master unit following the chase se
6. firmware upgrade utility program on windows based PC DMX 20 DMX channels Pan amp Tilt NICK NRG 801 FPR FPR limitless pan rotation in either direction never having to reverse motion Tilt 270 1 2 sec NICK NRG 801 Ultra fast movement Pan 540 2 sec Tilt 270 1 2 sec 16 bit movement resolution Selectable speed ranges Power supply Electronic full range AC 90 260V 50 60 Hz Power consumption 200W Connectors DMX 4 XLR connectors 3 pole In and Out 5 pole In and Out by Neutrik Power supply POWERCON In Out re launch connectors by Neutrik Operating ambient temperature 10 40 Weight 9 Kg International certifications Certification CE LED Class Class 2 LED product 5 TECHNICAL SPECIFICATIONS Dimensions Packaging Dimensions LxWxH 470 x 370 x 510 mm Weight 11 Kg rd 369mm Unit Dimensions LxWxH 401mm 369x220x401 mm Weight 9 Kg d 306mm 6 ACCESSORIES As standard e 1x POWERCON male cable connector cod 0520P014 e 1 x XLR 5 Pins male cable connector cod 0508B028 e 1 x XLR 5 Pins female cable connector cod 0508B027 e C Clamp GQUICK with Fast Lock connection 1 4 turn cod 0521A014 User s manual Optional on request Flight case Professional Flight case for 6 units compartment for accessories swivel wheels cover with hinges with stay dishes on cover for piling 8 handles 2 eachside cod 0521C062 1 W
7. grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r serv s Ce document ne peut tre copi photocopi ou reproduit dans sa totalit ou partiellement sans le consentement pr alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis chacun de ses produits D T S d cline toute responsabilit sur l utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamente redactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci n escrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de car cter est tico funcional o de dise o a cada producto suyo D T S no se asume responsabilidad de ning n tipo sobre la utilizaci n o sobre la aplicaci n de los productos o de los circuitos descritos INDEX IS dek EE EE OO EE 4 Z GENERAL WARNING ss ss ee ees ee Gee n ee o 4 3 GENERAL WARRANTY CONDITIONS ssssssssssssnssssnnnnnnneannnnnnnnans 4 A TECHNICAL FEATURES s ees iese ese esse ee ekke Se ekke ske eie see eke aaa Saka DOG eek ek GE eek RE Gee ee 5 5
8. independent Random Strobe 205 229 Dimmer Red Green Blue White channels disabled 230 255 Open DMX CHANNEL 9 Parameter DIMMER DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 255 Proportinal Dimmer 26 DMX CHANNEL 10 Parameter RED DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 255 Proportional colour DMX CHANNEL 11 Parameter GREEN DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 255 Proportional colour DMX CHANNEL 12 Parameter BLUE DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 255 Proportional colour DMX CHANNEL 13 Parameter WHITE DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 255 Proportional colour DMX CHANNEL 14 Parameter WHITE PREPROGRAMMED White at diff colour temperature DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 055 23 No Function Full Red Green 056 105 80 Blue at Full 106 155 130 White DTS Custom White 156 205 180 Create RGB levels selectable by DMX White CTC 206 255 230 Channel 15 CTC enabled DMX CHANNEL 15 Parameter CTC Colour Temperature Correction DMX ra
9. operates at 90 260V 50 or 60 Hz 9 INSTALLATION NICK NRG 801 may be either floor or ceiling mounted For floor mounting installations the NICK NRG 801 is supplied with four rubber mounting feet on the base For ceiling mounted installations we recommend the use of appropriate clamps to fix the unit to the mounting surface The supporting structure from which the unit is hung should be capable of bearing the weight of the unit as should any clamps used to hung it The structure should also be sufficiently rigid so as not to move or shake whilst the NICK NRG 801 is moving Four 1 4 turn Fast Locks connections placed in the base of the unit allow to hang the NICK NRG 801 by using the Fast Lock C clamps provided in the box wN 9 1 Safety cable A We recommend the use of a safety cable or chain connected to the NICK NRG 801 and to the suspension truss in order to avoid the fixture accidentally falling should the main fixing point fail Make sure that the iron cable or chain can bear the weight of the entire unit You may attach the safety chain cord to the attachment point A located on the base of the fixture as shown in the picture below SAFETY CHAIN CORD ATTACHMENT POINT 10 9 2 Protection against liquids The projector contains electric and electronic components which should under no circumstances come into contact with oil water or any other liquid The proper unit functioning would be compromised should
10. response 20 250 ms delay Slow response ENTER Up Down 16 LED RED MIN 0 MENU ENTER DOWN UP LED GREEN MIN 0 MENU ENTER DOWN UP LED BLUE MIN 0 MENU ENTER DOWN UP LED AMBER MIN 0 MENU ENTER DOWN UP LED SMOOTH 4 MENU ENTER DOWN UP RED Min default 0 RED Max default 100 ENTER GREEN Min default 0 GREEN Max default 100 BLUE Min default 0 BLUE Max default 100 WHITE Min default 0 WHITE Max default 100 SMOOTH Range Off 20 Default OFF 13 DISPLAY FUNCTIONS GAMMA CORRECTION This menu allows to select between Linear current output or Quadratic current output for LEDs Default Quadratic OUTPUT FREQUENCY This menu allows to adjust the PWM frequency value Hz in order to reduce flickering in the process of your camera recordings BOOST DRIVING This menu allows to increase the LED s current from 670 mA to 1000 mA Menu Up Down AUTOMATIC MODE Automatic demo game without DMX controller STEP 01 16 Chase with 16 steps previously created in REC MODE Speed time Wait time Dimmer Pan Tilt and Zoom values selectable by user PERSONAL COLOURS RGBW Dimmer Shutter Pan Tilt and Zoom values selectable by user RAINBOW Rainbow colours effect Speed time Dimmer Shutter Pan Tilt and Zoom values selectable by user AUTO IS ES 17 LED GAMMA CORR OUAD MENU ENTER DOWN UP LED OUTPUT FREQ 610
11. this occur 9 3 Movement NICK NRG 801 FPR Unlimited Pan rotation Tilt 270 1 2 sec NICK NRG 801 Ultra fast movement Pan 540 2 0 sec Tilt 270 1 2 sec Do not place any obstructions in the path of the projector s movement WARNING Do not place any object in the path of the projector s movement Free Pan Rotation FPR No FPR 9 4 Risk of fire It is permissible to place the unit on normally flammable surfaces Suitable for mounting on normally flammable materials surfaces greater than 2009C with some combustion time lag Minimum distance from the object being illuminated is 0 5 m LED 0 5 m 9 5 Forced ventilation You will note on inspection that the unit features various air inlets and cooling fans These should under no circumstances be blocked or obstructed whilst the projector is in operation Doing so could cause the fixture to seriously overheat thereby compromising its proper operation 9 6 Ambient temperature The projector should never be installed in places that lack a constant air flow The ambient temperature should not exceed 40 C 11 10 MAINS CONNECTION NICK NRG 801 operate at 90 260V 50 60 Hz Prior to connecting the unit to your mains supply ensure that the model in your possession correctly matches the mains supply available For connection purposes ensure that your plug is capable of supporting 1 5 amps at 230V or 3 amps at 90V Strict adherence to re
12. 6 120 Sec 235 244 Rainbow Speed 7 150 Sec 245 255 Rainbow Speed 8 180 Sec 28 DMX CHANNEL 17 Parameter FUNCTIONS Recall Create and Store the Custom white DMX range Mid Point DMX Move Range Mode Option Function Value value degrees IF CHANNEL 14 WHITE PRE PROGRAMMED DMX range value 156 205 000 079 Custom White Recall Custom White 080 160 Create Enable Custom White Creation Custom White 161 255 Store Store the Custom White created DMX CHANNEL 18 Parameter ZOOM DMX range Mid Point DMX Move Range Mode Option Function Value value degrees Linear Zoom 000 255 from Narrow to Wide 8 50 DMX CHANNEL 19 Parameter ZOOM SPEED DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 128 Zoom speed from max to min 129 247 Zoom maximum speed 248 255 Zoom medium speed DMX CHANNEL 20 Parameter RESET DMX range Mid Point DMX Move Range Mode Option Function Value value degrees 000 015 No Effect Total Reset 016 255 activation after 3 sec NOTES 29 NOTES 30 NOTES 31 32 The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cann
13. Nek NRG 801 User s Manual Rel 1 0 GB The Lighting Company D T S Illuminazione srl Made in Italy Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN ITALIA Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it http www dts lighting it Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non e assunta alcuna responsabilita per eventuali inesattezze Tutti i diritti sono riservati e questo documento non pu essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S D T S si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilit sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus
14. SPLAY FUNCTIONS IS ISSDEFAULT SET IS Menu Up Down ENTER Up Down DEFAULT SETTINGS To restore default settings DEFAULT SET MENU ENTER DOWN UP DEFAULT SET SURE Menu NO Enter YES MENU ENTER DOWN UP TEMPER C IS TEMPER C 028 7 MENU ENTER DOWN UP Menu Up Down TEMPERATURE Unit temperature IS IS TIME Menu Up Down TIME UNIT 13 Hr 08 min MENU ENTER DOWN UP TIME RED O Hr 08 min MENU ENTER DOWN UP TIME GREEN ENTER Up Down LIFE TIME This menu shows the total unit life time and the RGBW life time O Hr 08 min MENU ENTER DOWN UP TIME BLUE O Hr 08 min MENU ENTER DOWN UP ENTER ENTER TIME AMBER O Hr 08 min MENU ENTER DOWN UP 13 DISPLAY FUNCTIONS Menu Up Down PAN INVERSION TILT INVERSION PAN SPEED TILT SPEED STUDIO MODE RESET BY DMX PAN INVERSION This menu allows to set the Pan movement Normal or Reversed TILT INVERSION This menu allows to set the Tilt movement Normal or Reversed PAN SPEED Pan Speed control 1 5 TILT SPEED Tilt Speed control 1 5 STUDIO MODE This menu allows to set the Zoom speed OFF fast Default ON slow lower noise RESET BY DMX This menu allows to enable disable the Motors reset control Pang Tilt and Zoom via DMX system Y E 22 SYSTEM PAN INVERSION NORM MENU ENTER DOWN UP SYSTEM TILT INVERSION NORM MENU ENTER DOWN UP SY
15. STEM PAN SPEED 5 MENU ENTER DOWN UP SYSTEM TILT SPEED 5 MENU ENTER DOWN UP SYSTEM STUDIO MODE OFF MENU ENTER DOWN UP SYSTEM RESET BY DMX ENAB MENU ENTER DOWN UP PAN INVERSION Default NORM ENTER TILT INVERSION Default NORM PAN SPEED CONTROL Default 5 TILT SPEED CONTROL Default 5 STUDIO MODE Default OFF RESET BY DMX Enable Motors reset enabled via DMX Default Disabled Motors reset disabled via DMX Now Instant motors reset 23 13 DISPLAY FUNCTIONS IS ISS SOFTWARE IS I SOFTWARE LEDs CIRCUIT BOARD enu Up Down ENTER Up Down SOFTWARE SOFTWARE LED LEDs circuit board software MOTORS circuit boards software N5O1LED v102 Pan amp Tilt Zoom ENTER MENU ENTER DOWN UP SOFTWARE MOTORS CIRCUIT BOARDS SOFTWARE Motors PAN amp TILT ZOOM OD1B0011 V1 18 Dec 5 2013 MENU ENTER DOWN UP 14 PERIODIC CLEANING Front lenses Glass The dust can reduce the luminous output substantially Regularly clean the front lenses glass using a soft cotton cloth dampened with a specialist glasses cleaning solution Fans and air passages The fans and air passages must be cleaned approximately every 6 weeks This periodic cleaning will depend of course on the conditions in which the projector is operating Suitable instruments for performing this type of maintenance are a brush and a common vacuum cleaner or an air compressor If necessary clean the fan
16. TECHNICAL SPECIFICATIONS ss esse ese ee in seen Rd se Sesde Nee Eon onklo koko na a kokosa EEN Ee 7 G ACCESSOBIES ies SOO GIGA eg De OE vaD SELOJ ES VO DE EG Ge SAVAS ORE Ge SO NOTAS 7 7 IMPORTANT SAFETY INFORMATION s s ssssssssssssnnnnnennnnnnnnnanns 8 Tik Rire el oi OA 8 7 2 Prevention Of electric SMOCK se cis 8 A EEE 8 7 4 Level of protection against the penetration of solid and liquid objects 8 7 5 Waste Electrical and Electronic Equipment WEEE directive 8 8 VOLTAGE AND FREQUENCY 9 9 ANSTALLATION A 9 S Sale A illa 9 9 2 Protection against liQuids RA ee Re ee ee ee ee ee RR ee ee ee ee ee ee 9 9 3 MOVEMOS sica 9 TAS OMS NS SK A A A E 9 9 5 Forced ventilation O 9 9 6 Ambient temperature iss AA ee ee ee nn nn nana nn nn ee ee 9 10 MAINS CONNECTION nen inan aauina aeania mnaamini ankeaa hanan aaraa en inana a aiies a aa 11 A aa A OD bonis enna hubba A id 11 11 DMX SIGNAL CONNECTION iodo aa Ge eN re DA se Ge Ge se Gee 12 KIDMAN SOS Es ER ED ai 12 11 2 Selecting the DMX address ee nnn 12 12 FIRMWARE UPDATING i e koklo ed ee ea ed ee ee De DS 13 13 DISPLAYFUNGTIONS ss io ee AA oe ie 14 14 PERIODIC CLEANING la 23 15 PERIODIC CONTROLS ees REGEER a Sa ER GR GE ORR REED RENAS SA EE Ee 23 16 DMX PROTOCOL sss ani Ep e Ge ee ee es Ge we di ede 24 1 SYMBOLS Graphic symbols used on this manual THIS S
17. YMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK THIS SYMBOL INDICATES GENERAL RISK THIS SYMBOL MEANS YOU CAN PLACE THE UNIT ON NORMALLY FLAMMABLE SURFACES PPP THIS SYMBOL INDICATES THE MINIMUM DISTANCE BETWEEN THE UNIT AND THE ILLUMINATED OBJECTS LED THIS SYMBOL INDICATES THE EUROPEAN COMMUNITY DIRECTIVE 2002 96 EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT WEEE La 3 2 GENERAL WARNING Read the instruction contained in this user manual carefully as they give important information regarding safety during installation use and maintenance The device is not for domestic use and must be installed by a qualified electrician or experienced person Always disconnect the device from the mains before maintenance The device must always be equipped with an efficient ground connection 3 GENERAL WARRANTY CONDITIONS The unit is guaranteed for 36 months from the date of purchase against manufacturing material defects 4 TECHNICAL FEATURES NICK NRG 801 is an high efficiency compact LED moving head wash light which delivers a massive luminosity combined with an extremely light weight only 9 Kg NICK NRG 801 is equipped with 14 high power FULL RGBW or FULL WHITE LEDs coupled with a new generation optical group NICK NRG 801 features 8 50 motorized zoom from concentrated beams to large wall washes and ultra fast silent Pan Tilt NICK NRG 801 is a truly green fixture in fact
18. e follow the procedure below to perform the update 1 Install the D T S RED BOX USB DMX driver on the PC you will use to update the unit software 2 Connect the D T S RED BOX interface to the PC by using a USB cable 3 Connect the D T S RED BOX interface to the fixture by using a DMX cable 4 Download the new software version into the unit by using D T S Firmware upgrade Utility program 14 13 DISPLAY FUNCTIONS DISPLAY Nek NRG 801 2dBi IP20 omnid antenna WIRELESS DMX RECEIVER RETROFIT 03 LA 126 GIOCO DFP Dig al Functio Panel DMX DMX IN OUT DMX OUT MAINS AC OUTPUT 90 260V 50 60 Hz 16A Max DMX OUT MAINS AC INPUT 90 260V 50 60Hz DISPLAY FUNCTIONS The NICK NRG 801 display panel shows all the available functions Using these functions it is possible to change some of the parameters and add some functions Changing the D T S setting can vary the functions of the unit so that it does not respond to the DMX 512 used to control it Carefully follow the instructions below before carrying out any variations or selections NOTE the symbol iS shows which key has to be pushed to obtain the desired function 15 13 DISPLAY FUNCTIONS Software release 2 01 Display DISPLAY POSITION Menu Up Down DISPLAY POSITION STAND BY ENTER Up Down Display Position Reverses display s reading depending on the mounting position on the ground or suspended
19. ection is essential for proper functioning of the projector Never connect the unit without proper earth connection The fixture should be located in places with a good air ventilation 7 3 Safety A The projector should always be installed with bolts clamps and other tools that are capable of supporting the weight of the unit Always use a second safety cable to sustain the weight of the unit in case of the failure of the main fixing point The external surface of the unit at various points may exceed 70 C Never handle A the unit until at least 10 minutes have elapsed since the projector was turned off Never install the fixture in an enclosed area lacking sufficient air flow The ambient temperature should not exceed 40 C 7 4 Level of protection against the penetration of solid and liquid objects A The projector is classified as an ordinary appliance and its protection level against the penetration of solid and liquid objects is IP 20 7 5 Waste Electrical and Electronic Equipment WEEE directive E pa The machine accessories and packaging should be sorted for environmentally friendly recycling For EC countries according to the European Directive 2002 96 EC for Waste Electrical and Electronic Equipment and its implementation into national right luminaires that are no longer usable must be collected separately and disposed of in an environmentally correct manner 8 VOLTAGE AND FREQUENCY NICK NRG 801 can
20. gulatory norms is strongly recommended MAINS AC OUTPUT 90 260 V 50 60 Hz 16A Max MAX 12 NICK NRG 801 UNITS 230V MAX 6 NICK NRG 801 UNITS 120V MAINS AC INPUT 90 260 V 50 60 Hz Wireless DMX Receiver Retrofit Cod 03 LA 126 FUSE 3 5AT 10 1 Protection The use of a thermal magnetic circuit breaker is recommended for each NICK NRG 801 12 11 DMX SIGNAL CONNECTION The unit operates using the digital DMX 512 signal Connection between the mixer and the projector or between projectors must be carried out using a two pair screened 0 5 mm cable and a XLR 5 or 3 pins connector Ensure that the conductors do not touch each other Do not connect the cable ground to the XLR chassy The plug housing must be isolated Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the second one This way all the projectors are cascade connected NB If the display showing the DMX address flashes then one of the following errors has occurred DMX signal not present DMX address not valid DMX reception problem AR A CONTROLLER STANDARD 5 s DMX 512 2 j E N 2 DATA 3 DATA a S EDI i LR FTIA gt gt For Installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a male XLR 3 5 pins connector with a
21. ireless DMX receiver retrofit Wireless DMX Receiver Card with INDOOR IP20 omni 2dBi antenna included cod 03 LA 126 Clamps safety wires e C Clamp G60 black max load 50Kg cod 0521A004 e C Clamp GQUICK with Fast Lock connection 1 4 turn max load 80Kg cod 0521A014 e C Clamp G100 black professional max load 200Kg cod 0521A015 e Omega clamp with Fast Lock connection 14 turn 1 couple 2 pieces Cod 02K00467 Safety wire 3mm x 60 cm ring spring catch max capacity load 60Kg cod 0521A010 7 IMPORTANT SAFETY INFORMATION 7 1 Fire prevention lt is possible to place the unit on normally flammable surfaces Suitable for mounting on normally flammable materials surfaces greater than 200 C with some combustion time lag Minimum distance from the closest illuminable surface 0 5 m LED 0 5 Mi Replace any blown or damaged fuses only with those of identical value 3 5AT Refer to the wiring diagrams if there is any doubt Connect the projector to mains power via a thermal magnetic circuit breaker 7 2 Prevention of electric shock A High voltage is present inside the unit Unplug the unit prior to performing any function which involves touching the inside of the moving head The level of technology inherent in the NICK NRG 801 requires the assistance of specialised personnel for all servicing Please refer to an authorised D T S service centre A good earth conn
22. is blinking on NICK NRG 801 it mean that the units are logged out Transmitter Status LED Flashing red green no dmx connected Solid green dmx signal detected and transmitted Fast flashing red green log in mode every free NICK NRG 801 unit not logged in to any other transmitter will be logged on NICK NRG 801 Status Display blinking not logged on to a transmitter free Solid display logged on to a transmitter and receiving dmx data m A a ENTER WIRELESS DMX SYSTEM I 13 DISPLAY FUNCTIONS IS IS EMERGENCY IS Menu Up Down ENTER Up Down EMERGENCY Emergency operating mode By setting Emergency mode it will be possible to select one of the 16 preprogrammed WHITE cues that will then ran if DMX signal is missing or not available Useful for Emergency EXIT illumination on public areas Dimmer level Pang Tilt and Zoom values selectable by user 20 EMERGENCY SELECTION OFF MENU ENTER DOWN UP EMERGENCY SELECTION ON MENU ENTER DOWN UP EMERGENCY WHITE 1 MENU ENTER DOWN UP EMERGENCY DIMMER 255 MENU ENTER DOWN UP EMERGENCY PAN 128 MENU ENTER DOWN UP EMERGENCY TILT 128 MENU ENTER DOWN UP EMERGENCY ZOOM 0 MENU ENTER DOWN UP EMERGENCY Disabled Default ENTER EMERGENCY Enabled WHITE 1 16 Default WHITE 1 DIMMER Default 255 PAN Default 128 TILT Default 128 ZOOM Default 0 21 13 DI
23. lected on it but running their own Pan amp Tilt and Zoom position 18 AUTO FIXED COL COLOR 1 MENU ENTER DOWN UP AUTO WHITE WHITE NO 1 MENU ENTER DOWN SLAVE SURE Menu NO Enter YES MENU ENTER DOWN SLAVE PAN 128 MENU ENTER DOWN SLAVE TILT 128 MENU ENTER DOWN 0 MENU ENTER DOWN By setting all the units connected to the MASTER to DMX address 1 them will be synchronized with the Master unit following the chase selected on it including TIME WAIT Pan amp Tilt and Zoom position of the MASTER unit ENTER The SLAVE unit receive DMX i signal from the MASTER unit By setting all the SLAVE units connected to the MASTER to DMX address 1 them will be synchronized with the Master unit following the chase selected on it but running their own Pan amp Tilt and Zoom position 19 13 DISPLAY FUNCTIONS IS ISS WIRELESS IS IES WIRELESS WIRELESS DMX SYSTEM DISABLED Default WIRELESS DMX SELECTION Wieless DMX enabled disabled By activating WDMX MODE it will 0 FF be possible to control NICK NRG 801 via D T S ANTENNA Wireless DMX Transmitter cod 03 E1271 03 E1296 03 E12101 MENU ENTER DOWN UP f WIRELESS ENABLED Wireless DMX Receiver Kit Cod 03 LA 126 on NICK NRG SELECTION 801 is available on request O N MENU ENTER DOWN UP WIRELESS UNLINK UNLINK LOG OUT MENU ENTER DOWN UP Logging on NICK NRG 801 WIRELESS DMX m
24. nge Mid Point DMX Move Range Mode Option Function Value value degrees IF CHANNEL 14 WHITE PRE PROGRAMME D WHITE CTC DMX range value 206 255 000 255 Linear control temperature correction 0 2700 K 255 8000 K 27 DMX CHANNEL 16 Parameter COLOUR MACROS IF IS Is DMX SET IS Ss MACRO IS Ee STD IS Please refer to page 15 for details 000 014 No Function 015 029 Macro 1 030 044 Macro 2 045 059 Macro 3 060 074 Macro 4 075 089 Macro 5 090 104 Macro 6 105 119 Macro 7 120 134 Macro 8 135 149 Macro 9 150 164 Macro 10 165 179 Macro 11 180 194 Macro 12 195 209 Macro 13 210 225 Macro 14 226 239 Macro 15 240 255 Macro 16 DMX CHANNEL 16 Parameter COLOUR MACROS IF UN DMX SET IS UN MACRO SY Ss EXT Please refer to page 15 for details 000 014 No Function 015 024 Macro 1 025 034 Macro 2 035 044 Macro 3 045 054 Macro 4 055 064 Macro 5 065 074 Macro 6 075 084 Macro 7 085 094 Macro 8 095 104 Macro 9 105 114 Macro 10 115 124 Macro 11 125 134 Macro 12 135 144 Macro 13 145 154 Macro 14 155 164 Macro 15 165 174 Macro 16 175 184 Rainbow Speed 1 6 Sec 185 194 Rainbow Speed 2 15 Sec 195 204 Rainbow Speed 3 30 Sec 205 214 Rainbow Speed 4 45 Sec 215 224 Rainbow Speed 5 60 Sec 225 234 Rainbow Speed
25. ot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein MADE IN ITALY C The Lighting Company ISO 9001 2008 D T S quality system is certified to the ISO 9001 2008 standard D T S products are designed and manufactured at the D T S KUNU 05171229 D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italia Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it
26. s and air passages more frequently 15 PERIODIC CONTROLS Mechanical parts Periodically check all mechanical parts and the gaskets replacing them if necessary Electrical components Check all electrical components for correct earthing and proper attachment of all connectors refastening if necessary Attention Disconnect mains power prior to removing the projector housing Fuse replacement Locate the fuse which protect the electronics in the base of the NICK NRG 801 Using a multimeter test the condition of the fuse replacing it with one of equivalent type 3 5AT if necessary Attention Disconnect mains power prior to removing the projector housing 24 16 DMX PROTOCOL 20 CHANNELS MODE 1 PAN msb 5409 2 PAN Isb 3 TILT msb 270 4 TILT Isb 5 SPEED MOVEMENT 6 PAN FPR Active only on units with FPR system on board 7 NO FUNCTION 8 SHUTTER 9 DIMMER 10 RED 11 GREEN 12 BLUE 13 WHITE 14 WHITE PRE PROGRAMMED 15 CTC 16 MACRO 17 FUNCTION Recall Create and Store the Custom white 18 OOM 19 ZOOM SPEED 20 RESET DMX CHANNEL 1 Parameter PAN msb DMX CHANNEL 2 Parameter PAN Isb DMX CHANNEL 3 Parameter TILT msb DMX CHANNEL 4 Parameter TILT Isb DMX CHANNEL 5 Parameter SPEED MOVEMENT DMX range Mid Point DMX Move Range Mode Option Function Value value degrees Speed from max 000 127 to min Maximum speed 128 247 Medium speed 248 255
27. ust be enabled on the unit To log on the NICK NRG 801 in the WIRELESS system simply press and quickly release the function button on the transmitter The transmitter will start flashing rapidly red green scanning for new free receivers NICK NRG 801 units When a NICK NRG 801 logs on to the transmitter the LINK green light on transmitter starts to flash rapidly After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data The NICK NRG 801 now try to synchronize to the transmitter When synchronized to the transmitter 2 different modes are possible 1 Antenna transmitter has detected and transmits a DMX signal in this mode a solid green light is seen on the transmitter and solid display is seen on NICK NRG 801 2 No DMX signal connected the Antenna transmitter will flash red green display blinking on NICK NRG 801 To log off NICK NRG 801 from a transmitter simply select UNLINK function under WIRELESS DMX MENU and press ENTER When NICK NRG 801 is logged off the display is blinking meaning its available for log in on a new transmitter Logging out a NICK NRG 801 Select UNLINK function under WIRELESS DMX MENU and press ENTER When NICK NRG 801 is logged off the display is blinking meaning its available for log in on a new transmitter Logging out all NICK NRG 801 linked to a transmitter Press and hold the function button of the transmitter for about 3 seconds When the display
Download Pdf Manuals
Related Search