USER`S MANUAL AND MAINTENANCE DISPLAY FOR
Contents
1. E with external sensor e F I with integrated sensor The display can be fixed quickly and easily using the two threaded holes on the back of the housing or alternatively with the SM bracket support or the SF flanged support which can be supplied optionally The unit is powered by a 2AA 3 6V battery which lasts approximately 4 years and when the battery is almost exhausted an icon will appear to advise the operator to substitute it This does not effect the configuration parameters and also the correct measurement is maintained if the magnetic band is not moved during this operation Programming To step into the parameter programming press key A and on the display appears PASS now press 2 times key RESET and appear 4 zeroes the first on the right is blinking with keys A digit increase and lt digit selection set out password 0273 and confirm with RESET In case of wrong set out of password it goes out of the programming The parameters that have to be set can be run with key A and in order of appearance they are u ISUAL nd EC number of decimal digits d iEn count direction DERSE keys opening mode oFF SEE displacement of origin SEEUP not used value to be displayed for 10mm of sensor displacement To enter into the modification of the selected parameter press two times RESET one time displays only the value and with keys A and lt 4 set the wanted value to be confirmed with RESET Data 04 11 13 F 7_ing doc Rev 1 0 pag2. 3 12 Display for magnetic band F To go out of the programming press lt q w ISUAL value to be displayed for 10 mm of sensor displacement This parameter together with the following allows the programming of the value on the display for a certain displacement of the sensor It means that is necessary to set the value which has to be displayed corresponding to a displacement of the sensor on the magnetic band of 10mm The Factory value is VISUAL 10 0 which is the necessary value to read the displacement in millimetres with decimal resolution The range allowed is from 0 0001 to 99999 with setting of decimal point position that is after programming of the last digit on the left pressing key lt q will blink the decimal pinpoint and with key A it can be moved to the wanted position Confirm with RESET ride amp Number of decimal digits It is the number of decimal digits to visualize on the display range allowed from 0 to 4 Example for every 10mm of linear displacement it is necessary to display 12 345 with only two decimal places Set u 15 12 345 and ndEC 2 EASE Keys opening mode This parameter programmes the functions linked to the keys The value to set is a number of three digits so each key corresponds to a digit the digit on the right stands for setting of key RESET the digit in the middle stands for key while the last digit on the left stand for key a The values allowed are the following abs rel 1 mm inch conversio
3. SM BRACKET SUPPORT SLOTS FOR M3 HEX SCREWS MACHINE SIDE SN 31102013 SWIVEL SUPPORT Data 04 11 13 F7_ing doc Rev 1 0 pag 10 12 Display for magnetic band F SCREW TO LOCK ANGULAR ADJUSTMENT ANODIZED ALUMINUM SUPPORT M6 HOLE FOR INSTALLATION Data 04 11 13 F 7_ing doc Rev 1 0 pag 11 12 Display for magnetic band Technical features Range display Resolution Max speed Power supply Battery life Display Keyboard Available functions Protection degree sensor cable for F7 E only Sensor house for F7 E only Gap sensor magnetic strip Working temperature Relative humidity Electromagnetic compatibility Manufacturer F7 99999 99999 0 1mm 2 5 m s battery 1 2 AA voltage 3 6V lithium thionyl chloride Typical 4 years continuous use High readability LCD with 7 5mm high digits 3 digits for programming and functions activation reset preset absolute incremental value mm inch conversion 3 distinct origins for tool changing IP54 display IP67 sensor for F7 E only length 0 5 1 3 5 meters Material PUR 5 5mm suitable for movable wiring cable alluminium black 1mm max 0 50 C 35 85 EEC 2004 108 All communications to the manufacturer should be addressed to FIAMA s r l Via G Di Vittorio 5 A 43016 San Pancrazio Parma Italy Tel 39 0521 672 341 Fax 39 0521 672 537 e mail info fiama it www fiama it FIAMA srl is not respo
4. Display for magnetic band F FIAMA COMPANY WITH QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV 150 9001 2008 USER S MANUAL AND MAINTENANCE DISPLAY FOR MAGNETIC BAND WITH BATTERY POWER SUPPLY TYPE F Data 04 11 13 F 7_ing doc Rev 1 0 pag 1 12 Display for magnetic band F Manual purpose This manual has been designed by the Manufacturer to provide the necessary information regarding the instrument F7_ to those who are authorized to carry out safely its installation maintenance dismantling and disposal All the necessary information for the buyers and planners can be found in the Sales catalogue Other than adopting good technical construction methods the information should be read carefully and strictly applied Inobservance of this information could cause risks for the health and safety of people and economical damage This information provided by the Manufacturer in the original language Italian is also available in other languages to satisfy legislative and or commercial needs This manual must be kept in good conditions by a responsible person in an ideal place so that it is always available for consultation In case this manual is lost or deteriorates a replacement should be requested directly from the manufacturer quoting the manual s code This manual reflects the state of skill of the instrument at the time of input on the market however the manufacturer reserves the right to make changes add or improve
5. adius of cutter 0 which is then confirmed by pressing ENTER RESET Now Pr I will appear which is the nominal value for tool 1 for example the radius of cutter 1 set the correct value and confirm with ENTER RESET Finally Pr Se will appear which is the nominal value for tool 2 for example the radius of cutter 2 set the correct value and confirm with ENTER RESET In practice P 50 PrS l and PrS e are the nominal values associated to the three different tools which are used As a special case if P 50 is set to zero Pr5 I and PrSe are the values to display in origin 1 and in origin 2 respectively ABS REL function Enables passing from an absolute to relative value after pressing A the displayed value is temporarily set to zero to measure a relative motion of the transducer On the display the REL icon indicates that the current display is relative to the reference point that has just been created Pressing again A causes the absolute value to be displayed and the ABS icon will appear mm inch conversion Pressing lt converts the measurement from millimeters to inches and back When in inch mode the INCH icon will appear and the displayed value will have an additional decimal place When the parameter ndEC 4 the mm inch conversion is not available Offset This parameter is added to or subtracted from the displayed value to correct it in case for example of a tool change or to compensate tool wear After setting a positive offset val
6. ed value to zero Now that the instrument is adjusted it is necessary to insert the desired EHSt parameter to avoid accidental reset preset of the displayed value Battery replacement The instrument is supplied with a 2AA 3 6V lithium battery which assures a typical functioning of approximately 4 years When the battery runs down an icon appears on the display To enter into the battery holder it is necessary to remove the front cover by carefully inserting a flat screwdriver on the sides After taking off the cover pull the battery out and substitute it with a new Data 04 11 13 F 7_ing doc Rev 1 0 pag 5 12 Display for magnetic band F one paying attention to the polarity the positive pole must face the side of the ENTER RESET button The instrument is protected against inversion of polarity and wrong insertion and in this case will not switch on Removing the battery from the instrument switches it off after a few seconds at this point do not move the sensor to avoid losing the correct displayed value As soon as the battery is fitted the instrument switches on with the same value on the display which was present at the moment when it was switched off If the sensor has not be moved the displayed value will be correct In case the sensor moved when the instrument was off to re establish the correct measure it is necessary to repeat the adjustment process Display icons 1 Indicator of low battery it is activated when is i
7. n Reset measurement Fast Preset Change of origin Not active Not active 0 1 2 Offset Fast Offset 7 Not active Not active Delayed reset after 3s Not active Not active Delayed preset after 3s Delayed means that to activate the function reset or preset it is necessary to keep ENTER RESET pressed for approximately 3 s Reset reset function of the displayed value after pressing ENTER RESET the displayed value is set to zero Preset preset function of the displayed value after pressing ENTER RESET the displayed value becomes equal to the value in the Pr St parameter which can be set immediately after EASE when the digit on the right is set to 2 Fast Preset the fast setting of the displayed value on the display after pressing ENTER RESET P 5t appears and pressing 2 times ENTER RESET it is possible to set the value directly use A and lt and then confirm with ENTER RESET This function is useful when the displayed value must be corrected often Data 04 11 13 F7_ing doc Rev 1 0 pag 4 12 Display for magnetic band F Origin change correction of the displayed value for tool changes with this function 3 different origins 0 1 2 can be set and with ENTER RESET it is possible to switch from one origin to another After setting 4 in the first digit on the right of the EASE parameter P SU will appear and after pressing 2 times ENTER RESET it is possible to set the nominal value for tool O for example the r
8. nsible for any damage to persons or things caused by tampering and wrong use and in any case that are not consistent with the features of the instrument Data 04 11 13 F7_ing doc Rev 1 0 pag 12 12
9. s advisable to calibrate the instrument periodically once every working year To do the calibration follow the calibration procedure indicated in the present manual Assistance request procedure For any kind of technical assistance request contact the sales department of the Manufacturer directly indicating the information given on the identification plate the number of hours used and the type of defect Manufacturer s responsibility The manufacturer declines any responsibility in case of e Using the instrument contrary to the national safety and accident prevention laws e Wrong installation inobservance or wrong procedures of the instructions provided in the present manual e Defective electrical power supply Modifications or tampering e Operations carried out by untrained or unqualified staff The safety of the instrument also depends on the strict observance of the procedures indicated in the manual always operate the instrument in its functioning capacity and carry out a careful routine maintenance Data 04 11 13 F 7_ing doc Rev 1 0 pag 2 12 Display for magnetic band F e All phases of inspection and maintenance should be done by qualified staff e The configurations provided in the manual are the only ones permitted e Do not try to use it anyway contrary to the indications provided e The instructions in this manual do not substitute but accomplish the obligations of the current legislation regarding the safet
10. t necessary to change the battery Indicator of inches measurement Indicator for origin 1 and 2 Indicator of relative displayed value Not used AGUN Error message oUE the current displayed value passed the maximum value that can be visualized possible range from 99999 to 99999 Magnetic strip mounting The magnetic strip P50 consists of a magnetized plastic ferrite strip with alternate magnetic poles of 5 mm pitch carried by a ferromagnetic steel strip Mechanical protection of the plastic ferrite strip is supplied by a non magnetic steel strip with thickness 0 2mm sensor side non magnetic steel strip yO mechanical protection a plastic ferrite strip teel strip plastic ferrite support E LD 170 The magnetic strip is assembled by sticking it with a bi adhesive tape The surface has to be smooth clean and dry is advisable to clean it with a degreasing product isopropyl alcohol ethyl alcohol solvents etc The magnetic strip has to be stuck holding the plastic ferrite side in the direction of the sensor which means the steel side leaned on the stand surface Fixed the magnetic strip to keep off damages due to abrasions or grazes of the plastic ferrite strip is advisable the appliance always bi adhesive of the non magnetic protection strip The optimal ambient temperature for stick the bi adhesive tape is over 10 C The maximum adherence of the tape
11. the manual without giving any reason to hold the present manual inadequate Identification of the equipment The identification plate represented is applied on the instrument To find out the identification code of the instrument consult the sales catalogue Environmental conditions Temperature setting min 0 C max 50 C It is forbidden to use the instrument other than its specific use and in potentially explosive conditions or where anti explosive elements are used Storage Here below are some references to be followed for the storage of the instrument Avoid environments with excessive humidity and those exposed to bad weather avoid open areas Avoid putting the instrument directly on the ground Store the instrument in its original packing Conformity declaration and EC marking The instrument answers to the following Communitarian Directives 2004 108 EC Electromagnetic compatibility with reference to general Rules EN61000 6 2 immunity in industrial environment and EN 61000 6 3 emission in residential environment Maintenance The instrument does not needs a particular maintenance except cleaning to do only with a soft cloth dampen with ethylic alcohol or water Do not use hydrocarbon solvents petrol diluents etc the using of these products could affect the proper functioning of the instrument Reparations should be done only and exclusively at the FIAMA technical assistance centre Calibrations and tests It i
12. ue the displayed value will be the measured value plus the offset value After setting a negative offset value the displayed value will be the measured value minus the offset value Fast Offset After pressing ENTER RESET UFFSt appears and by pressing two times ENTER RESET it is possible to set directly the value to be displayed use buttons A lt 4 and confirm with ENTER RESET This function is useful if it is necessary to correct often the displayed value cd I C Uri Count direction Set out the count direction of the display range allowed 0 or 1 Adjustment of displayed value After the installation of instrument on the machine and setting of all parameters in order to visualize on the display the correct value it is necessary to carry out the reset or preset Position the shaft in a point in which the correct measure that has to be visualized is known exactly for example the stroke end point or measure the position in that point of the shaft Program parameter EASE with value 3 in the first digit on the right and exit programming Now press ENTER RESET and PrSt will appear press again 2 times ENTER RESET and set the correct value to display then confirm with ENTER RESET The display will now show the desired value If the required value is zero instead of the preset function it is possible to use the reset function by setting 1 in the first digit on the right in the EASE parameter so that pressing ENTER RESET will bring the display
13. works out after 48 hours about of the application and is kept between 10 and 80 C Data 04 11 13 F 7_ing doc Rev 1 0 pag 6 12 Display for magnetic band F Sensor mounting The sensor has be mounted according to the following draw and keeping the indicated tolerances For the optimal system functioning its is necessary that the distance between the sensor and the magnetic band is not over 1mm of the useful stroke MAX 1 JUN Oe F7 E MULTIFUNCTION PROGRAMMABLE ELECTRONIC DISPLAY UNIT WITH EXTERNAL SENSOR FOR MAGNETIC BAND BATTERY POWERED VIEW A SENSOR MAGNETIC SENSOR Data 04 11 13 F7_ing doc Rev 1 0 pag 7 12 Display for magnetic band F E 18 INCLINED DISPLAY 48 C re gt BATTERY BAY M3 HOLES FOR FIXING SCREWS DIGIT HEIGHT 7 5MM lt EYBOARD F7 1 MULTIFUNCTION PROGRAMMABLE ELECTRONIC DISPLAY UNIT WITH INTEGRATED SENSOR BATTERY POWERED Fa RESET jy ABS RELA mm inch VIEW A VIEW B Data 04 11 13 F7_ing doc Rev 1 0 pag 8 12 Display for magnetic band SF 03 1 FIXING HOLES MACHINE SIDE Data 04 11 13 F7_ing doc MAGNETIC SENSOR 18 INCLINED DISPLAY BATTERY BAY DIGIT HEIGHT 7 5MM KEYBOARD Rev 1 0 F7 M3 HOLES FOR FIXING SCREWS 31102013 COUNTER BORE FOR M3 HEX CSREW pag 9 12 Display for magnetic band F
14. y laws Installation Before installing the instrument read the following warnings a Connect the instrument strictly following the instructions of the manual b It is the responsibility of the user to check before using the correct settings of the parameters of the instrument to avoid damage to persons or things c The instrument CANNOT function in a dangerous environment inflammable or explosive d The unit has sensible parts to electrostatic charge therefore the handling of the inner electronic cards has to be carried out with appropriate care to avoid permanent damages Description The F7 is a display unit with integrated position sensor in combination with the P50 magnetic band is a complete system to measure linear movements The display has five digits plus sign range from 99999 up to 99999 The digits are 7 5mm high to allow excellent readability also at a distance It is possible to select the counting direction the number of decimal places and the units mm or inches The displayed value can be corrected with a multiplication factor with values between 0 001 and 99999 The instrument can count in absolute mode or relative mode by pressing the corresponding button Also it is possible to set a preset value which can be activated by pressing the corresponding button The electronics are protected by a plastic housing which is robust shock resistant and self extinguishing Two versions of the F7 are available e F
Download Pdf Manuals
Related Search