CR-3306 BT FM Radio with Bluetooth® User manual
Contents
1. e a a aE a E s E e a a eG E Ss SE s EE a SE c eee Ca oO O80 oat ogogo e e e OO OO 8 oo oc Oo 0 6 o o 14 Light on position put the light switch in this position to turn on the built in light 15 Light off position put the light switch in this position to turn off the built in light 16 Reset button carefully press this button with a paperclip to reset the device 17 Preset Time Set button use this button to store a radio station recall a radio station or set the time 18 Alarm 2 button press this button set alarm 2 or activate it 19 Alarm 1 button press this button to set alarm 1 or activate it 20 AUX input connect an AUX device to this input 21 USB charger a device can be charged using this connector 22 Power socket connect the power adapter to this socket Getting started Where to install Never place the device in direct sunlight Place it on a sturdy platform of which the surface should be flat and steady so the product can t fall or hit by any objects Make sure the product is placed in such a manner that nothing can fall on top of it as pressure will damage or break the product Prevent insertion of objects into the ventilation slots or openings in the cabinet at all time A Always read the safety instructions carefully before use A Lenco is not responsible for damages and or consequential damage caused by improper use or malfunction of the device A Lenco is not responsible for the loss of da2. interfere with the normal use of this device If this occurs reset the device and restart it according to the instructions in the user manual The display is made of plastic and might break when it s damaged Beware of sharp plastic splinters when the screen breaks to avoid injury Should the unit become wet immediately remove the plug from the power outlet and let the appliance fry for 72 hours before trying to use it again Remove the batteries from the device and or remote control if they will not be used for a long time This device and the supplied accessories contain sensitive components Never drop them put them in a microwave burn them or paint them Do not bite or suck on the device and or supplied accessories Do not insert the device or the supplied accessories in your ears mouth or other body orifices This device and or accessories contain small parts that may lead to a choking hazard Therefore keep it away from children When connecting the device if a connector does not seem to fit do not force it Be careful when using this device when participating in traffic the sound might distract your attention Lenco recommends using A brand batteries A WARNING Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss WARNING Do not use a USB extension cable to connect a USB device The use of a USB extension cable can cause malfunction or loss of data Declaration
3. of Conformity CE Products with a CE marking comply with the EMC directive 2004 108 EC and the Low Voltage Directive 2006 95 EC issued by the European Commission of the European Community ROHS this device has been manufactured according to the ROHS Directive ErP Il this device complies with the ErP Directive WEEE this device complies with the 2002 96 EC Directive Do not distribute copyrighted material Do not distribute copyrighted material without the permission of the owners By doing this you risk violation of copyright laws The manufacturer is not liable for any legal issues caused by illegal use of copyrighted material by the user Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are solely provided for your personal and non commercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell or create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS LENCO DOES NOT WARRANT CONTE
4. AIN EP sie a a a a a 16 S KE NIG AAA SE E A A EAS A TE TETTE 17 SE E aa SDPO oea a a ee 18 Dear customer Thank you for choosing for Lenco At Lenco we are convinced that everyone should enjoy life as much as possible Our products are meant to support improve and create joyful moments for everyone For this reason we offer user friendly high quality and well designed consumer electronics for an excellent price This user manual is designed to help you with the features of this device Note This user manual was written during the development of the product based on the factory settings If the product would need improvement priority is given to the product and therefore in these cases the quick start guide user manual illustrations in the user manual and or packaging may differ from the actual product Lenco is not liable for any printing errors in this user manual What s in the box The content of the box is assembled with the utmost care In the unfortunate case that anything is missing please contact your dealer Content of the box 1 Radio 1 Power adaptor Exploring the device In the user manual every feature or action always includes the number of the button or part that is used so that you can easily recognize the buttons or parts that are needed Top view iH Sa C SNOOZE DIMMER N PA m i E m 1 Snooze Dimmer button when the alarm sounds press this button to snoo
5. Lenco Table of content WAG SU Wi ON 6 rears eps ospbsns sont asnt owt anos aces E EEE EE AEREE 4 EXDIOGIIC TG GC VICE eE E ctseaseeatnsaendensaoederseasadarecaradenscenter 5 TOD OY are E a pon eos aire render E E E E 5 FFONT VION oei E anne 5 Roa WW sne o e E T E T 6 Geno ane EE E E E EO 7 MVPS FS 1G WS TU crises sora citeyan ian inert eat E aa on eee sca fadnapaasate SEAR T Connecting the device to the MAINS ccccccceeccceccceeeeee cece eeeeeeeseeeeaeeeseeessueeseeessueeseeeseeeeaes 7 BASIC SENGS ar tec atenccneccanecasecncatec E E E easeoe 8 SENO MIC COCR apresa E E E E EE 8 Pair amp Play connecting a Bluetooth GeVICE ec cceccceccceeceaeeeceeeeeeeeseeeeeeeeseeeeaeeeseeees 8 Adjust the brightness of the display cccccccccecccsececeeeeeeeeseeeeeeeeseeeeeeeeseeeseeeeseeeseeeeaeeeseeees 9 Ba C ols e212 ee a a E A A aR 9 ASIC Wr EAU OS pace renee nid E E E E E E 9 POWer on oN INE GEVIER E E E E E 9 Adjust the speaker volume oisisssbses asec enerices ste cseeczgas Seed adeaaend seandaed shecdeecneacdece ston socneatasdeeesespodtovinx 9 Select CENG INpUL SOU cra oe sada eee EE E E E T enue 9 SS UHI TINS A CIOCK a E E E E 9 SNOOZE INTSEUIPT TNS Alari sorsero arna EET ES s 10 Disable the alarm for 24 NOUMS cccccsccccceeeeceeeeceeeeeeeeeeseeeeseeeeseeeeseeeeeseeeeseeeeseeeeseeeeeneeeeas 10 Disable Ne alai Miesse a aA a eS 10 Rado MOU enee satis snl E E evaded cee ieneuee 10 Turning the ra
6. NT OR SERVICES SO PROVIDED NEITHER EXPRESSLY NOR IMPLIED FOR ANY PURPOSE LENCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE LENCO DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL LENCO BE LIABLE NEITHER IN CONTRACT NOR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be terminated or interrupted at any time and Lenco makes no representation or warranty that any content or service will remain available for any period Content and services are transmitted by third parties by means of networks and transmission facilities over which Lenco has no control Without limiting the generality of this disclaimer Lenco expressly disclaims any responsibility or liability for any interruption or Suspension of any content or service made available through this device Lenco is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or ser
7. The device will now return to the Standby mode and the set time is shown on the display Pair amp Play connecting a Bluetooth device Pair amp Play allows you to connect a Bluetooth device with a simple press on the button and it allows you to directly enjoy your favorite music 1 2 3 4 Turn on the device by pressing the Power button 13 Switch to the Bluetooth mode by repeatedly pressing the source button 13 Once the display shows blue the device is in the Bluetooth mode Go to the Bluetooth menu on the external device and click on Lenco The devices will now establish a connection Depending on the external device you may have to give Lenco permission to automatically connect to the external device To increase user friendliness Lenco advises to allow establishing an automatic connection If the external device would ask for a PIN code then input the code 0000 ail T Mobile WL Tao O fps ool Tine ML a iad AEREI Bluetooth oni Bluetooth on Devices Devices BluePort Not Connected AluePort Not Connected Lenco Not Paired Lenco Connected Go to the music player on the external device and export your favorite music to the Lenco radio on o Ea Annuleer Adjust the brightness of the display When the device is in standby mode press the Dimmer button 1 to adjust the display brightness The brightness can be set to low medium and high Basic Operation Basic Fe
8. atures Power on off the device press the Power button 13 to turn the device on or off Adjust the speaker volume press the volume buttons 8 9 to adjust the volume Select the input source press the de source button 13 to select the input source the options are Radio AUX and Bluetooth Setting the alarm clock The device is equipped with 2 independent alarms which can be set to wake you at different times When the alarm sounds it will start soft and it will gradually increase in volume until the maximum set volume is reached Set the alarm as follows Important note If both alarms are set within 60 minutes of each other the first alarm will automatically be disabled when the second alarm is scheduled to start The alarm that is disabled will sound again at the set time on the next day Note in the instructions below alarm 1 is set as an example Alarm 2 can be set by following the same procedure 1 Make sure the device is in standby mode 2 Press the Alarm 1 button 19 the Alarm 1 LED 5 lights up 3 Press the Alarm 1 button 19 again and keep it pressed until the hours starts flashing Use the Previous 12 and Next 10 buttons to set the hours Confirm the hours by pressing the Alarm 1 button 19 Once the hours have been confirmed the minutes start flashing Use the Previous 12 and Next 10 buttons to set the minutes Confirm the minutes by pressing the Alarm 1 button 19 Once the minutes have b
9. dio ON scion ctcnreisicianislaiceniesenisieduainidedeniiectnnisercanioineaniesioauicndsiseindouanedescaseawiabwonsndsiihendecaasssieen 10 Finding a station freQUENCY ccccceeccescceeeeceeeeseeeceeeceaceseueceeeesaeesaneesaeessueesaeeeaeessneesaaes 10 Storing preset StatiONS cece cececceceeeeececeeeeeeeeaeeeeeeeeeeeeeeseeeeeesseeeeeesaeneeeesaanes 10 Recalling a preset station eisson aai an 11 Playback from a Bluetooth CEVICE c cc ceccceccceeccceeeceeeceeeeceeeeeececeeeeseeeaueeseueeseeesseeeaeesaess 11 Basic Operation during playback from a Bluetooth device nnnannnennnnnnnnennnnnnnnnnnnnnrnnnnrsnnnnni 11 Saee A e E E O E E E E EN 11 Using tMesleep Mer ssns a a N 11 Usinge NOM ION see e Seats EE EAE E EEA S 12 PRESEU PAG HOG ICG raris E E S 12 ONC COINS erener e E E E EE E E 12 Connecting a device through the AUX INPUt cccccceececeeceeeeeceeeseeeeeeeeceeeeseeesseesaeeesaees 12 Charging a device through the built in USB charger cccccceecceeeeeeeeeeeeeeseesseeeneeeneees 12 Maintenance Of ING CEVICE scscccsczcnqrerasacaesnaceneesxqeendesnaasacesnesancemseaanareraaendestasacansneresaeens 13 TOUDICSNOOUNG ecann 13 SD SCIICAUON airis EEE 13 Salely INS WUCTIONS sorosoro era eer EE E eE SEA 14 DE ONO COMON a nasal asanatabesaaaseieeanosalsuanesaausaaeneesensnaedes 15 Do not distribute copyrighted material cccccccecceeceeceeceeeceeseeeaeeceeseeseeseeseeeees 16 VIS C
10. e device after a preset amount of time has elapsed This is useful for example when you want to fall asleep while listening to music To activate the sleep timer press the Snooze Dimmer button 1 when the device is turned on Once you have pressed the button the time in minutes will appear on the display the time can be adjusted by repeatedly pressing the Snooze Dimmer button 1 The sleep timer can be set to 90 80 70 60 50 40 30 20 10 minutes Once the desired time is shown on the display wait 5 seconds for the device to store the time and activate the sleep timer To disable the sleep timer press the Snooze Dimmer button 1 and keep it pressed until OFF appears on the display It is also possible to turn the device off while using the sleep timer by pressing the Standby Source button 13 Using the night light The device is equipped with a built in night light To turn on the night light put the light switch in the on position 14 To turn the night light off put the light switch in the off position 15 Reset the device When the device does not respond correctly or does not respond at all it can be reset by carefully pressing the Reset button with a paper clip Please note that when the device is reset all settings will be lost If the device is still not responding properly after the reset disconnect the power adapter from the power outlet for 5 minutes Connections Connecting a device through the AUX input Eve
11. e sure that power outlets or extension cables are not over overloaded Overloading can cause short circuits or fire Always pull the plug when removing it from the power outlet Do not pull the power cord This may cause a short circuit f you notice smoke an excessive build up of heat or any other unexpected phenomena you should disconnect the plug from the power outlet immediately Disconnect the plug from the power outlet during lightning storms Disconnect the plug from the outlet when the device will not be used for a long time Do not step on the power cord and don t pinch the power cord Do not place heavy objects on the power cord or any other cables as this may damage the cord or cables Keep the device away from children When they play with the power cord they can seriously injure themselves Keep the power cable away from rodents and rabbits Make sure all ventilation openings are clear at all times do not cover or block them Leave 5 cm 2 free space around the device Always make sure the device is well ventilated Keep the device away from heat sources such as radiators heaters stoves candles and other heat generating products Avoid using the device near strong magnetic fields Do not use this device when condensation may occur Do not use this device near water or other liquids Do not use this device in a damp room Do not use this device near a swimming pool Electrostatic interference may
12. een confirmed the wake up source starts flashing 0 Use the Previous 12 and Next 10 buttons to select the wake up source The following sources can be selected FM and ALARM When setting the source please note that beeping sound will play when selecting Alarm and the right radio station is selected when selecting FM SO PAs 11 Confirm the wake up source by pressing the Alarm 1 button 19 12 Finally set the desired maximum wake up volume Use the Previous 12 and Next 10 buttons to set the wake up volume When the alarm sounds the alarm will sound 60 minutes After 60 minutes the alarm stops and it will sound again on the next day Snooze interrupt the alarm When the alarm sounds it can be temporarily interrupted Interrupt the alarm by pressing the Snooze button 1 When snooze is activated the alarm will resume after 9 minutes Using the snooze function is possible for up to 60 minutes after the set alarm time After 60 minutes the alarm stops and it will sound again on the next day Disable the alarm for 24 hours lf you want the alarm to stop and continue on the next day press the Power button 13 Disable the alarm Press the Alarm 1 button 19 to disable alarm 1 Press the Alarm 2 button 18 to disable alarm 2 Radio mode This device has an FM radio with a wire antenna for receiving radio signals If you want to listen to the radio first fully extend the wire antenna If the signal is weak adjust the
13. ernal audio input AUX 3 5mm USB charger USB 5V 500mA Connections Bluetooth A2DP AVRCP Dual alarm eee Dual alarm Other features Built in night light Sleep timer 0 90 min 1 Power supply adaptor Manufacturer Shenzhen Adition Audio Science amp Technology Co Ltd Model number ADO80501500EU oF E Use only the power supply listed in the user instructions Safety instructions Explanation of symbols A f This symbol indicates that dangerous voltage is present within this device constituting a risk of electronic shock or personal injury This symbol indicates that there are important operating maintenance instructions in the user manual accompanying the device CAREFULLY READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USE WARNING A RISK OF ELECTRIC SHOCK A DO NOT OPEN THIS DEVICE WARNING DO REMOVE ANY SCREWS OR OTHER COMPONENTS OF A THE DEVICE TO PREVENT THE RISK OF ELECTRIC SHOCK Install and use the device only as described in the user manual This device must be used in combination with a power supply as specified in the specification table If you are not sure of the type of power supply used in your home consult your power company Do not use loose or damaged cords and or plugs This device has a Class II construction Devices with a Class II construction can be connected to an unearthed power outlet The power outlet must be located close the device and must be easily accessible Mak
14. on 10 3 Store a station by pressing the preset button 17 Recalling a preset station You can recall a preset station by pressing preset 17 Then use the Previous 12 or Next 10 button to browse through the stored stations Playback from a Bluetooth device Through the built in Bluetooth receiver music can be wirelessly streamed from an external Bluetooth device to the Lenco radio Enter the Bluetooth mode by pressing the source button 13 until BLUE is shown on the display The radio will automatically try to connect to the last paired device If pairing fails or if you want to connect to a different Bluetooth device hold the pair button 11 until the the Bluetooth LED Starts flashing See chapter pair amp play for instructions on how to pair a Bluetooth device Basic Operation during playback from a Bluetooth device A Depending on the external Bluetooth device the following functions might not work not work correctly or work differently than described Pause playback press the play pause button 11 during playback to pause playback Press the play pause button 11 again to resume playback Skip to next track press the next button 10 during playback to skip to the next track Skip to previous track press the previous button 12 during playback to skip to the previous track Other functions Using the sleep timer This device is equipped with a sleep timer that can be used to turn off th
15. position of the antenna to find the best reception Contact your local service provider for a frequency list of the radio stations that can be received in your area Turning the radio on Press the Power button 13 to turn the device on If the radio is not in radio mode press source 13 until the display shows Rad Once Rad has disappeared the frequency and the band FM are shown on the display Finding a station frequency You can use manual tuning or automatic tuning when searching for a radio station To automatically search for a station with a frequency higher than the current frequency hold the next button 10 for 3 seconds To automatically search for a station with a frequency lower than the current frequency hold the previous button 12 for 3 seconds Once the tuner has found a station with sufficient signal strength it will stop scanning automatically To manually switch frequency or to fine tune briefly press the previous button 12 to lower the frequency with steps of 0 05 MHz Briefly press the next button 10 to increase the frequency with steps of 0 05 MHz Storing preset stations You can store up to 10 stations in the memory Storing a station 1 Press the Preset button 17 and keep it pressed until CH starts flashing CH is the number of the preset station which means the number that the station will be saved under 2 You can browse through the CH numbers by pressing the previous button 12 or next butt
16. ry device with an AUX output or headphones output can be connected to the AUX input When the external device is connected through the AUX input the volume can only be controlled through the radio Everything else can only be controlled on the external device To playback sound through the AUX input the radio must be set in the AUX mode Do this by repeatedly pressing the source button 13 until AU is shown on the AU op het display Charging a device through the built in USB charger To charge an external device connect the device with mini USB to the built in charger 21 Once an external device is connected it will start charging immediately Maintenance of the device Clean the device only with a soft damp cloth Do not use detergents Troubleshooting Problem Solution __ S The device is not turning on Check if the plug is inserted firmly into the outlet The device is not responding well SEMIOVE Ji Pig Worn ae a least 5 minutes Settings or options are suddenly cancelled limit Repeat the steps Radio stations can barely be heard because of noise or cannot be received Move the wire antenna Bluetoothe music stutters Place the Bluetoothe device closer to the radio Specification 1 5 m power adapter Power Supply Input AC 100V 240V 50 60Hz Output DC 5V 1500 mA Standby 0 7W Power Consumption Operation BW uals 10 35 C peer Humidity 5 90 Output Display Yes Yes Ext
17. s not suitable for professional use In case of professional use all warranty obligations of the manufacturer will be voided 2012 STL Group B V all rights reserved Lenco is a trademark of STL Group B V STL Group B V is not responsible for any printing errors in this manual Products of other manufacturers are only mentioned for information This does not mean that these products are recommended by STL Group B V STL Group B V accepts no liability for the reliability or compatibility of these products
18. ta during data transfer or or the loss of data Do not use a USB extension cable to connect a USB device The use of a USB A extension cable can cause malfunction or loss of data Connecting the device to the mains The device can be powered by connecting it to the mains Connect one end of the power adapter to the adapter socket 22 located on the back of the device Connect the other end to a power outlet Basic settings Setting the clock In standby mode the device will display the clock on the LCD display You can set the clock as follows 1 2 3 Make sure the device is in Standby mode Hold the time set button 17 for 3 seconds until 12H or 24H appears on the display Use the previous next buttons 10 12 to change the clock display format You can select 12 or 24 hours display format To select the 12 hours display format make sure the display shows 12H To select the 24 hours display format make sure the display shows 24H Confirm the selection by pressing the clock set button 10 12 The device will automatically go to the screen for setting the clock Use the previous next buttons 10 12 to set the hours Once the hours are set confirm the setting by pressing the time set button 17 The device will now automatically switch to the screen for setting the minutes Use the previous next buttons 10 12 to set the minutes Once the minutes are set confirm the setting by pressing the time set button 17
19. vices should be made directly to the respective content and service providers End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe To ensure the correct waste treatment of the product and battery please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries In so doing you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste Waste Electrical and Electronic Equipment Directive When you see a crossed out wheeled waste container on the product It means that the product falls under the EU directive 2002 96 EC Service and support For information and support about the hardware www lenco com Lenco helpdesk Germany 0900 1520530 Local charges The Netherlands 0900 23553626 Local charges 1ct P min Belgium 02 6200115 Local charges France 0170480005 Local charges The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM Lenco offers service and warranty in accordance to European law which means that in case of repair both during and after the warranty period you should contact your local dealer Please note It is not possible to send repairs to Lenco directly Important note If the unit is opened by a non official service center the warranty expires This device i
20. ze the alarm for 9 minutes When listening to the radio or music this button can be used to set the sleep timer The device will automatically turn off when the set time has elapsed If the device is turned off press this button to set the display brightness Front view EKE SOO OVOQOO 2 FM LED when the radio is receiving an FM station this LED will be lit 8 9 Bluetooth LED this LED indicates the Bluetooth status When the LED is blinking the device is searching for a Bluetooth device When the LED is lit a Bluetooth device is connected AUX Alarm LED this LED is lit when the device is in AUX mode or when an alarm is activated Alarm 1 LED This LED is lit when alarm 1 is set Alarm 2 LED This LED is lit when alarm 2 is set PM LED When the clock has been set to 12 hour format this LED will be lit during 12 o clock in the afternoon and 12 o clock in the evening Volume button press this button to increase the volume Volume button press this button to decrease the volume 10 Next button press this button to skip to the next track 11 Play Pause Pair button press this button to start pause playback or to search for a Bluetooth device 12 Previous button press this button to skip to the previous track 13 Power Source button press this button to turn the device on off or to chance the input source Rear view 009 ooOe oC ooo eo oOo Of ooo oO oe oOo 8 EEs s e e E E a
Download Pdf Manuals
Related Search