User Manual For S28-8CH MDVR GUI
Contents
1. User Manual For S 28 8SCH MDVR GUI Mobile Digital Video Recorder Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved ey R Streamax NOTICE The information in this manual was current when published The manufacturer reserves the right to revise and Manual S28 GUI 16CH 2013_Q3 improve its products All specifications are therefore subject to change without any notice The purpose of this manual is to kindly aid the user for the operation for our MDVR especially for GUI setting The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings Copyright Under copyright laws the content of this manual may not be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form in whole or in part without prior written consent of Streamax Technology Co Ltd Copyright 2012 2014 Eea www streamaxtech com gt a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Streamax Manual S28 GUI 16CH 2013 _Q3 Table of Content 1 PRODUCTION CHRACTERISTICS AND OVERVIEW sssessssssssrressssssrssrssssssesssssrssessesssessssssrees D Li PRODUCT OVER VEE WY sp cancrascsetcracscounacinctsesesnaguarasnsedaasnaenecsncunesoenccvatasnstavaptecniareicamtorameceianne 5 12 REMOTE CONTROL siciccs2. NEXT PAGE SAVE EXIT There are two center servers you can setup You can connect MDVR via WIFI or CABLE and 3G at the same time NET OPTION There are two options one is WIFI or cable network and the other is MOBILE NETWORK Please select the correct option MESSAGE SERVER This server IP must be the IP of the PC that installed message server for CMS connection You can setup it as Static IP or Dynamic Domain name it s due to the server PORT please use the default port 5556 here MEDIA SERVER IP AND PORT NO use at present 3 2 3 3 MOBILE NETWORK This interface is to setup the wireless modules type active mode and SIM card parameters when you connect with net cable please select mode type as NONE MOBILE NETWORK MODE TYPE WCDMA ACTIVE MODE DIAL PARAMETER INTERCOM SETTINGS ACTIVE MODE There are three options ALWAYS means when MDVR started up the wireless module will always dial up and connect to message server Eea www streamaxtech com gt Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax CALL SMS means only you call the phone number of the SIM card or send the message to the SIM it will Manual S28 GUI 16CH 2013 _Q3 active the wireless module and start to dial up SENSOR means you can setup one sensor to active the wireless module only when you triggered the sen
3. PTZ camera by RS485 signal on the RS232 485 expand box following commands can control PTZ RECALL Recall the position that you have setup Eea www streamaxtech com gt Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax 1 3 GUI GRAPHIC USER INTERFACE TREE Manual S28 GUI 16CH 2013 _Q3 DATE TIME s REC SEARCH GENERAL REGISTER INFO EVENT FILES FORMAT UPGRADE USER SECURITY SYSTEM CONFIG SYSTEM LOG GEO FENCING OPTIONS RECORD RECORD SETTING Oe S SCHEDULE IP CAMFRA OTHER SETTINGS LOCAL NETWORK SERVER MOBILE NETWORK SENSOR ALARM OUTPUT SPEED EVENT ACCELERATION TEMPERATURE CAMERA VOLTAGE MERGENCY EVEN TATIGUE DRIVING PERIPHERAL SYSTEM HISTORY MODULES SMART BATTERY Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice _ Streamax 2 SYSTEM START UP Manual S28 GUI 16CH 2013 Q3 After connecting the MDVR to a vehicle power supply turn on the vehicle ignition and the unit will automatically start up Power is normally supplied to the MDVR as long as the vehicle ignition is ON Display only view of the cameras is immediately available to be viewed in quad mode Normally the power supply for MDVR is about 12
4. Rights Reserved All specifications are therefore subject to change without notice Streamax BAND WIDTH 0500 ON cir amp ON ON ON ON ON ON ON Manual S28 GUI 16CH 2013 _Q3 SUB STREAM 20 4096 Kbps MAX CHANNELS 4 CIF CIF CIF CIF CIF CIF CIF onnWvWdrd A Ki KIKIKIKIKIKIKI NEXTPAGE SAVE BAND WIDTH Setup the band width for the sub stream which due to the network bandwidth of your SIM card ENABLE Enable the channel or not RES Resolution CIF QCIF optional FR Frame rate frames per second 1 25 1 30 for NTSC adjustable 3 2 2 7 SCHEDULE SCHEDULE DATE SCHEDULE1 TYPE SCHEDULE2 TYPE EVERY J 00 00 00 00 00 00 CON MY 00 00 00 00 00 00 CON B4 00 00 00 00 00 00 CON P 00 00 00 00 00 00 CON D 00 00 00 00 00 00 CON PA 00 00 00 00 00 00 CON ss D 00 00 00 00 00 00 CON FY 00 00 00 00 00 00 CON tf 00 00 00 00 00 00 CON 00 00 00 00 00 00 CON eae 00 00 00 00 00 00 CON 00 00 00 00 00 00 CON hey haa E 00 00 00 00 00 00 CON 00 00 00 00 00 00 CON WKD WEEKDAYFROM MON N To SUN NEXTPAGE SAVE Date To select the exact date for MDVR recording Single Day Every Day Weekday kkkkkkkkkk Choose the day to create a recording schedule Choose Every to apply a schedule to every day of the week Schedule will only apply Weekdays weekday is from Monday to Friday Choosing the asterisks will suspend the highlighted schedule Ty
5. and then press EXPORT for backup Then the following screen will pop up RECORD SEARCH CHANNEL 1 4 NONE NOPMAI INFORMATION TIME coc Oc TOTAL 2 NO 2 C C BACKUPING DO NOT REMOVE USB IC e SURE CANCEL START MIME UU UU0 00 PLAY UNLOCK END TIME 11 01 59 EXPORT EXIT TOTAL total quantity of the files that you selected for back up NO The file number which is being copied to external thumb drive After successful backup then the following screen will pop up Eea www streamaxtech com ows Bereurvay Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Streamax Manual S28 GUI 16CH 2013 _Q3 RECORD SEARCH CHANNEL 1 4 NONE LOCK NORMAL ALARM INFORMATION TIME 00 0 CH1 CH2 CH3 CH4 START TIME 00 00 00 PLAY UNLOCK END TIME 11 01 59 EXPORT EXIT 3 1 2 EVENT SEARCH Search for all the event files LOG as well as the corresponding video file EVENT SEARCH EVENT TYPE ALL TYPE DATE 2011 11 25 SEARCH EXIT EVENT TYPE The type of the alarm file including I amp O ALARM ACCELERATION SPPED TEMP ALARM VL ALARM You can please select different alarm type to search the log and playback the Weenie www streamaxtech com S Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey R
6. means no audio when alarm happens IDLE TIME SEC How long the operation interface will switch to the QUAD view If the user does not make any operation on MDVR GUI for some time the MDVR system will back to the QUAD view automatically We suggest that you please setup this idle time as your setup demand Once the MDVR access into the GUI the MDVR will stop recording EVENT FILES AUTO EXPORT USB When this switch is ON you can back up all the alarm record files of the current day to thumb drive by press F1 key on remote control OUTPUT MODE This is the output mode for monitor There are 4 3 and 9 6 two options TRANSPARENCY Setup the brightness for the screen display as you want Scroll to SAVE to make the setting valid Eea www streamaxtech com gt Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice i A e Streamax 3 2 1 3 REGISTER INFO Manual S28 GUI 16CH 2013 Q3 REGISTER INFO UNIT S N 0064000076 UNIT ID 00000 99999 00001 COMPANY NAME VEHICLE NO DRIVER ROUTE NAME DEVICE ID UNIT S N The series number for MDVR One MDVR has only one S N This number is read from special encrypted chip UNIT ID Device ID Use the NUMERIC keypad on the remote control to enter the system ID from 00000 to 99999 This ID is used to login to the unit if security is enabled set as yes COMPANY NAME The nam
7. time MDVR unit will synchronize with GPS time once UCAC www streamaxtech com QS strema Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ay Streamax B While selecting the NTP Network Time Protocol the device must have network access Manual S28 GUI 16CH 2013 _Q3 connection and assign the NTP IP location TIME ZONE Please choose the correct time zone for MDVR system SYNC TIME This is the time when the unit will sync the system time every day The method depends on the setting on the TIME SYNC SOURCE option NTP SERVER IP Input the IP server does support NTP protocol in order to allow the system can have time synchronization through the network Example 192 43 244 18 129 6 15 28 211 22 55 116 194 88 2 60 DST Daylight Time Only when it set on the following option will available DST MODE There are two modes Auto custom Auto According to the international DST i e valid only between 2AM on Second Sun in March and 2AM on First Sun in NOV Scroll to SAVE to make the setting valid 3 2 1 2 GENERAL GENERAL ON OFF TYPE IGNITION OR TIMER BOOTUP TIME 06 00 00 SHUT DOWN TIME 18 00 00 BOOTUP IN RECORDING TIME OFF N SHUT DOWN DELAY 1 300 MIN 005 BUZZER SWITCH orF N IDLE TIME 30 300 SEC 300 EVENT FILES AUTO EXPORT USB ON X AsPecTMODE 4 3 N TRANSPARENCY 25 N SAVE EX
8. CCALERATION OFF VIDEO LOSS OFF MOTION OFF BLIND OFF FRONT PAGE NEXT PAGE SAVE Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax ALARM TYPE Manual S28 GUI 16CH 2013 Q3 SENSOR ALARM OUTPUT LOW VOLTAGE OFF PANIC oF amp FRPNT PAGE SAVE ON means this input can trigger this output OFF means can t 3 2 4 3 SPEED Setup the alarm for over speed and some other parameters SPEED SPEED SOURCE GPS VEHICLE SPEEDCHECK SPD 020 P s 00200 CALIBRATE SPEED UNIT KMPHE MILEAGE ON OFF MILEAGE CALIBRATE 000000 KM CALIBRATE b EE OSD ENABLE THRESHOLD ALARM LOWSPEED SPDL OFF H OVERSPEED SPDO OFF SOURCE MDVR is capable of capturing vehicle speed via GPS antenna or Vehicle speedometer Browse between the settings of GPS or speedometer from the list Please note that the GPS antenna should be connected to MDVR to receive satellite signals for speed For more information on capturing speed from speedometer please contact local distributor for more technical support SPD CHECK Speed check is used to calibrate the offset soeed when connected to the speedometer That s to say the check only available when speed source is vehicle Input the first area with the vehicle speed for example at 80 in KM H Start the vehicl
9. DS is the downloading software 3 2 3 1 LOCAL LOCAL NETWORK 192 168 003 100 255 255 255 000 192 168 003 002 CLIENT PORT 10030 WEB PORT 10090 DNS SERVER 202 096 134 133 MAC ADDRESS 00 18 F5 0A 68 90 Local IP is the IP setting for the MDVR to make sure that MDVR can go online Must enter a fixed IP address to use network capabilities please consult with local Internet Service Provider for the information Use NUMERIC keypad to enter the TCP IP address information IP Enter the static IP address SUB Enter the subnet mask GATE Enter the gateway that the MDVR through to network CLIENT PORT no use at present WEB PORT this port is for IE access you have to add this port when you want to access to MDVR through IE browser of example you have to access MDVR by hitp 192 168 3 155 10090 DNS The DNS of the router when you want connect MDVR to internet via cable please setup the DNS here MAC Address MAC address is uniquely and cannot change it 3 2 3 2 SERVER NETWORK The sever IP and port setting for PC software Eea www streamaxtech com gt Bia Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey e Streamax Manual S28 GUI 16CH 2013 _Q3 CENTER SERVER IP 1 CABLE NET NET OPTION MESSAGE SERVER STATIC IP 192 168 003 155 PORT 5857 MEDIA SERVERIP DOMAIN NAME members 3322 org PORT 10080
10. ISTORY X 00 000g 2012 06 13 15 58 32 Y 00 000g 2012 06 13 15 58 32 Z 00 000g 2012 05 13 15 58 32 LOWEST VOLTAGE IN HISTORY O 0V 2012 04 31 13 51 32 HIGHE ST VOLTAGE IN HISTORY 19 20V 2012 06 13 11 08 11 FRONT PAGE NEXT PAGE EXIT LOWEST TEMP IN HISTORY 0C 2012 04 31 13 55 32 HIGHEST TEMP IN HISTORY 41C 2012 05 13 11 08 04 FRONT PAGE Press CLEAR to delete all the current data 3 3 3 MODULES Display the GPS module information GPS MODULE DETECTED GPS SIGNAL INVALID WIFI MODULE NONE WIFI SIGNAL INVALID dAn www streamaxtech com Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Streamax Manual S28 GUI 16CH 2013 Q3 3 3 4 SMART HDD1 10UJ90Z316268 HDD2 237J9CZ902473 3 3 5 VER INFO FIRMWARE VERSION ROS 16HD1 1080401 MCU VERSION 28 D STM32 MCU T302261 dAn WwWww streamaxtech com Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice
11. IT ON OFF TYPE There are ignition timer and ignition or timer three options They are the modes to boot up the MDVR device not for recording For example the setting is timer from 5 00 12 00am MDVR will startup automatically during this period but for recording it depends on the setting in the SCHEDULE and RECORD MODE menu A IGNITION for shut down delay function For example If you make the shut down delay time is 5 min then MDVR will shut down after 5 minutes after the ignition is off B TIMER MDVR will boot up or shut down automatically at certain time configured every day Zp oMr eE WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax C IGNITION OR TIMER means include both conditions Manual S28 GUI 16CH 2013 _Q3 BOOT UP TIME The exact time for MDVR starts to work every day SHUT DOWN TIME The exact time for MDVR shut down every day BOOT UP IN RECORDING TIME ON means timer start up function is linked to record function if you refer to boot up the MDVR and start recording at the same time For example if the record schedule setup is from 6 00 8 00am MDVR will boot up and record automatically if you setup this time on SCHEDULE recording menu during this period even the vehicle ignition is OFF BUZZER SWITCH ON means the buzzer will alarm when alarm happens OFF
12. ORT Export the corresponding video if the event has the record file If no related video file you will got a remind information that no video file 3 2 SETUP Move arrow key to select and press ENTER The MDVR setup screen will show the menu as below Eea www streamaxtech com gt a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice R Streamax Manual S28 GUI 16CH 2013 _Q3 ES a z y i _ yy a EF A A nai 7 e Ea i i a os a IME SYNC SOURCE i NTF kd 3 CE en 7 TIMEZONE J i pe ee o NTP SERVER IP 255 255 255 012 AUTC l 1 oF Oo 7 Om et SS s po A ea m e E DST OFFION i DST MODE MANUAL i P d A a 7 p jy gy ana tt e was g OOOO T ol PARE y TLIDOr i CIIAN IN A OE da ONR THIRD v SUN IN ar rT L s pi IN AI 2AM ON j THIRD ad SUN IM Arr i l m A r SAVE EXI i e _ na mme 3 2 1 1 DATE TIME DATE FORMAT Press ENTER to select different format MM DD YYYY DD MM YYYY YYYY MM DD TIME FORMAT 12H or 24H Press ENTER to select different format TIME SYNC SOURCE The system can adjust the time in different zone via either GPS or NTP A While selecting the GPS the MDVR device must have GPS connection Should have GPS module and antenna and GPS must can receive the signal When the system time arrives the sync
13. Streamax corresponding video files Manual S28 GUI 16CH 2013_Q3 DATE MDVR system will display the current date automatically Please press SEARCH to enter into the next menu to list out all the certain video files depends on files type and date EVENT LIST SEL EVENT NAME DATE TIME FIRST x VL 2012 04 14 09 35 20 PGUP ce 2012 04 15 10 20 39 EGUN LAST DATE 2012 11 25 gt TOTAL 2 REV EX LOG EXPORT PRE DAY NEXT DAY EXIT SEL For selecting the LOG for backup Please move the arrow key on remote control to select the LOG file that need to back up The file selected will be remarked by the icon X Please press REV to for reversing selection EVENT NAME The event name that you setup for the events on the EVENT menu But here just show the event OSD information the abbreviation The alarm includes such as video loss I O sensor alarm for over speed low speed or high temperature and so on DATE Display the date on which the alarm is triggered TIME The start time when the alarm is triggered REC if there is an R means it has the corresponding alarm video files REV Reversing selection For example If no there are no any files are selected and you select REV all the files are selected If one file is selected and select REV the others will be selected and the Originally selected one will be unselected EX LOG Export the selected LOG to external device by USB port on the front of MDVR EXP
14. Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice iy Streamax Manual S28 GUI 16CH 2013 _Q3 recording module and display on screen control menu Remote Control Key Functions 1 Numeric Keypad 0 9 keys During setup number keys are used to input number values In QUAD view you can press 1 2 3 and 4 to switch the full screen for each channel and press 0 to switch to quad view During full screen view of each camera you can press dS key to adjust contrast luminance color and saturation and then press and to make the adjustments Pressing Be will navigate through the color adjustment options 2 Setup Menu Navigation A V Up down directional keys Move selection up and down in setup menu gt lt Left Right directional keys Move cursor left or right in setup menu ENTER key During setup select and save the settings 3 Other Keys Function You can press LOGIN LOCK or SETUP key to enter the GUI to setup If LOGIN LOCK password enabled you have to input default Admin password 88888888 To reset the MDVR to sleep mode You can press power button again to let MDVR POWER start up when it in sleep mode Switch full screen of one channel to quad view Brightness contrast color adjustment for per channel Use button to change 206 seme Yuta tsar toch ramma PaM o STOP Used to stop the recording manually Only vali
15. V 5A without any accessories System Login for Setup e PASSWORD lt r e f password is disabled press SETUP key on the handheld controller into the setup menu directly e f password is enabled press LOGIN LOCK OR ENTER key on the handheld controller the setup menu will appear DEVICE NO 123456 123456 123 PASSWORD DEVICE NO The unit ID of MDVR You can setup the ID for the MDVR in the menu REGISTER INFORMATION After setting the ID number will appear automatically on the login screen It s the number in the bracket PASSWORD Enter the admin password or user password ey Streamax Keyboard Press Enter to use keyboard to type device ID and password Manual S28 GUI 16CH 2013 _Q3 1 0 9 number key press Enter to select the number 2 123 Input type shift key Number capital small letter 3 lt delete Exit 3 GUI CONFIGURATION This part will show all the main functions for MDVR including SEARCH SETUP and INFORMATION SEARCH is for searching all the video files and alarm files SETUP is for all the configurations for MDVR including recording event network setup and INFORMATION displays the MDVR and accessory working status 3 1 1 REC SEARCH You can search all the video files including normal files alarm files by record date and file type and storage Eea www streamaxtech com ows Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved A
16. VOLTAGE Manual S28 GUI 16CH 2013 _Q3 LOW VOLTAGE PROTECTION ENABLE VOLTAGE VOLTAGE OF START NTERVAL TIME FOR CMS SHUT DOWN DELAY SAVE CANCEL VOLTAGE PROTECTION means when MDVR system detect that the voltage input always in a low status MDVR will disconnect to CMS and shutdown automatically ENABLE setup the voltage protection switch ON means enable OFF means disable VOLTAGE setup the low Voltage limited value VOLTAGE OF START this means when the voltages of the battery reach this value MDVR will startup automatically INTERVAL TIME FOR CMS means when MDVR in low voltage for so long time device will disconnect to CMS server SHUTDOWN DELAY means when MDVR in low voltage for so long time device will shutdown automatically 3 2 5 PERIPHERAL SYSTEM J 5 pa JE a NAS A E RECORD NETWORK D V Q al gt PERIPHERAL T EXT COM SETUP iJ Peo een Wi f 5 Pr i d a r JE dAn www streamaxtech com ows Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey R Streamax 3 2 5 1 PTZ Manual S28 GUI 16CH 2013_Q3 CHANNEL PROTOCOL PELCO D PELCO D PELCO D BAUD RATE 9600 2400 2400 DATA BITE 8 g STOP BITE 1 1 1 VERIFY NONE NONE NONE ADRRESS 001 001 NEXT PAGE CHANNEL The channel of PTZ co
17. WwWww streamaxtech com ows Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Sey Streamax Manual S28 GUI 16CH 2013 Q3 Re enter must be same input as first password otherwise the system would not accept the password setting when password does not match between the first line and the re enter line Scroll to SAVE to make the setting valid 3 2 1 7 CONFIG CONFIG DEFAULT SETTINGS RESTORE RESET ALL HISTORY INFO RESET EXPORT CURRENT SETTINGS SAVE AS MDVRCFG CFG TO THE ROOT OF EXTERNAL DEVICE IMPORT THE SETTING FILE MDVRCFG CFG FROM THE ROOT OF EXTERNAL STIRAGE DEVICE TO MDVR IMPORT Restore the default setting and export and import the MDVR configuration EXPORT Export the all configuration for the MDVR to another MDVR to make sure that two MDVRs have the same setting Please insert the external storage device to the USB port and then press EXPORT Then the configuration file will backup to external device RESET Reset all the history info to default values IMPORT Follows the operation EXPORT Import the MDVR configuration file to the MDVR except MAC address and IP Please insert the external storage device to the USB port on the MDVR Must have configuration file in the storage device and then press IMPORT The configuration will import to another MDVR automatically RESTORE Restor
18. and any other accessories Remote Connection Capabilities PC Based Client software for live viewing playback video playback events associated video and download capabilities Support CMS Central Management System for remote monitoring via built in 3G module HSPA or EVDO Ceiba Playback Analysis Software for video playback meta data analysis dAn WwWww streamaxtech com ows Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice a gt Streamax 1 2 REMOTE CONTROL uy q peo000 o m Q REV m PN a m a ee t T gt pe Pa aJS STEP PLAY SLOW GOTO PT Cr STOJ SEOCORC ALITC ry QFCALL ERUSH rT F2 F F4 DJUR 7 l Manual S28 GUI 16CH 2013_Q3 Numeric Input Keys Use the numbers to input Values in the system setup Screen or switch through the channels in QUAD view E OY Navigation Arrows Use the ARROW keys to move between selections input fields and icons Press ENTER to select And EXIT to return and entering into the OSD screen to check the MDVR working status Next and previous is also used to increase or decrease volume when at live or search screens Each MDVR includes a handheld Infra Red IR controller that allows the user to transmit commands to dAn WwWww streamaxtech com e gt Streamax Copyright 2012 2014
19. as follow ftp 192 168 3 233 and the recorded file save path is ftp 192 168 3 233 stm disk 0 p1 201 2 1 1 23 a dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Streamax Manual S28 GUI 16CH 2013 _Q3 fa b Thelnternet 192 168 3 233 gt File Edit View Tools Help Organize v Wr Favorites stm ME Desktop File folder is Downloads Recent Places lt a Libraries 2 Homegroup j Computer amp WIN C The default login username is admin password is 88888888 if you can t login at the first time please try again 3 2 4 EVENT EEren SENSOR OUTPUT TN SPERD NETWORK W J a a a ACCELERATION i b TS Wu EI F EVENT TEMPERATURE P 5 A CAMERA PERIPHERAL 7 Ate VOLTAGE Wl an eee mi ee EMERGENCY EVENT Lwin lt 4 FATIGUE DRIVING ALARM PANIC OFF F DOOR OFF R DOOR RD OFF BRAKE BK OFF LEFT LT OFF RIGHT RT LOW OFF RED WA RW tow Moose KEE EE Ee EE KEES ED KEKI KI KI KE ENED ED YEL WA YW LOW OFF NEXT PAGE SAVE Zp dAl eE WWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax These are I O sensor functions to detect the drivers behavior such as braking
20. cccnasecansn sens cesaneswensesanwiacacwuva snes dswewsunenwensnensetswadueresnendentwenseseiasnessweruaten 6 1 3 GUI GRAPHIC USER INTERFACE TREE ssesesesseseseceesesececscsesececeesesececsesesececscsesececsesesecesseseo 9 2 SYTEM SIART UP stvnsncesencesenabasuesasnemansenldnoiausaadnen tabsaussannanureuatsunuacbadnessatcsueuaunetunceatdanneusbadnests 10 3 GUI CONFIGURAT ION sssesessseseeereeeeeeeeeeeereeeeereereeeeeeeeereeeeeeeeeeeeeeeeeeeeeeeeeeeeeereeeeeeeeeeeeeeeeeeeeeeee LL Sek SEAR H cerni E OAE OOO O EUNA ONN OTOR 11 PLET WC SE E iE sueeonss ees yceusobsnsnsa cee eeureoneyesseiyereenos 11 Pl EVENT EAR Cea E E E E ecatanaausieeassuncea oausereeteeasmerunaaes 15 Beh SETUP oa E E EAE OT E ETE ETO E OEO EO 16 DLE A TTEN a E E E E seeanes 17 aLL DATETIME crans EE ee EA 17 PLL GENERA C cr E E 18 AALS eGo ale O noe E T EE E E eer errr 20 ILLA FORMA Te E E E E A ean iceeseowncecthe 20 rela UPORA DE erin E E A E ee et etree 21 DLLO UER ECURIT aoe E E E 23 Sy ae I CONFIG a A ean r ae rere tre ere crrrer errr 24 Mie U ERE ara pe tecectn E clan ence ews see nanos pee are E E ees dake need ota 24 ALS GEO C deere ene een eee ern ee ere ne ee eC Torn en rere eer 25 Be RECORD ep canerectenn E E A E E R 26 eee PTO a E E E E T 26 DL ODT OVERLATE oats eo A EA A E 28 322 3 CAMERA SETTINGS en reser eee eee eer oe nee een er eon 30 322 24 RECORD SETTING ciwesceonsesassacenessqoasnosnsosueadanneparuausasenceeacoanesunenentsoansatiaueumeasso
21. d when you setup the record mode as manual Used to start the recording manually Only valid when you setup the record mode RECORD as manual Freezes playback to a single frame and can advance one frame at a time To PAUSE STEP gt advance the frame press Pause Step to move frame by frame Press EXIT to return to normal playback speed PLAY 7 Starts Resumes playback from any other mode FF RR Frame by Frame etc SLOW Reduces playback speed to 1 2 1 4 1 8 modes Press PLAY to return to normal gt playback speed Quick search mode when you playback the record file in MDVR Press GOTO gt button and input the desired time and the select SURE to jump to the specific time UECECHUENCHE www streamaxtechcom SQ Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 _ Q3 you want to playback NEXT Ean Increase volume while playback if audio is recorded PREV i Decrease volume while playback if audio is recorded Rew Rewinds the video while playback X2 and X 4 modes availabe FWD gt Fast tornara the video while playback X2 and X4 modes avalie TFT Expo al the event record ies of the day to USB by press F1 key TOUS Reserved for future use 4 PTZ Function Key S28 MDVR can support PTZ camera by the protocol PALCO D or PALCO P While the MDVR is connected the
22. e all the settings to factory default settings 3 2 1 8 USER LOG You can export or delete the user log in this interface as follow picture Remark The user log mainly include start recording and end recording time event time GPS module status power on and power off time and so on Eea www streamaxtech com ows Bereurvay Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice gy Streamax Manual S28 GUI 16CH 2013 Q3 SYSTEM LOG EXPORT SYSTEMLOG DELETE SYSTEM LOG INFORMATION DELETE SYSTEM LOG SUCCESSFUI SURE EXPORT SYSTEMLOG The user log exported to USB drive is stored in txt format and it will be save to userlog 00000 0 folder according to date SYSTEMLOG EXPORT SYSTEMLOG DELETE SYSTEM LOG INFORMATION SYSTEM LOG EXPORTEDSUCCESSFULLY SURE 3 2 1 9 GEO FENCING GEO FENCING GEO FENCING SWITCH ON EXPORT THE GEO ENCING CONFIG FILE IMPORT THE GEO ENCING CONFIG FILE GEO FENCING SWITCH this is the switch to enable GEO Fencing function This switch is only for MDVR terminal To finish the setting for GEO FENSE you need to setup the CMS software as well For more details a dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax please
23. e and the second area will show the data from speedometer in HZ When the vehicle reach to 80 KM H shown in vehicle meter or dash board and keep this speed at 30 seconds then press the Check to make the system calibrate the second area HZ set as first area data 80 SPEED UNIT MPH or KPH MILEAGE is the total mileage that the MDVR has run T Eea www streamaxtech com gt a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 _Q3 OVER SPEED If the vehicle exceeds the high speed limit MDVR will trigger the alarm signal when the following option ALARM set as YES until the driver slows down the speed LOW SPEED If the vehicle exceeds the low speed limit MDVR will trigger the alarm signal when the following option ALARM set as YES until the Admin password is entered to acknowledge the alarm 3 2 4 4 ACCELERATION There are 3 values for G force inertial sensor X Y and Z X indicates forward and backward Y indicates left and right and Z indicated up and down Threshold is the limitation for the value if the value large than the setting in the menu then MDVR will trigger alarm ACCELERATION osp ENABL THRESHOLG ALARM LOCK OVERSHOCK SHK ON 45 g ON OFF Zz 55 G X 01 356 01 042 Z 01 108 CALIBRATE SAVE EXIT 3 2 4 5 TEMPERATURE Inspection for t
24. e of company Press the arrow key on the remote control and highlight this option and then input the name of the company VEHICLE NO The number of the vehicles DRIVER ROUTE NAME The driver s name and the route name DEVICE ID This is the unique ID can be recognized for the message server of PC software for MDVR including CMS Central Management Software Ceiba Ceiba Playback and Analysis Software and ADS Auto Download Software If you need to connect MDVR to any PC software please make sure you have setup this ID for MDVR Remark when you connect MDVR to PC software make sure vehicle NO and DEVICE ID is filled otherwise it can t connect to message server Scroll to SAVE to make the setting valid 3 2 1 4 FORMAT Select the devices to format HDD SD card or external storage device Eea www streamaxtech com gt a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice gy R Streamax Manual S28 GUI 16CH 2013_Q3 FORMAT Device VIDEO STORAGE USB SD FUNCTION FAST SLOW FORMAT DETECT HDD X SURE EXIT DEVICE Please press ENTER to select the target device to format There are 3 options VIDEO STORAGE SD and USB Then press FORMAT to format the device Video Storage means the main recording storage For example for A5 MDVR we have hard disk for main recording and SD card for mirror recording If you want t
25. ee pow age sa T 46 3 3 INFORMATION caincetcrctaiacarerctasesesaccuvactataccussassiernscterevasnacavectersasisseaatornseiesoreraqaaeeevenenspsenicrones 47 AL ATEN a E E E nner Tr eran rere 47 oL MOTOR oe NE E E ceed nica sees E A A 48 roo MODULE rerna ia E eansaes cetacean sa Soi piesa ster eesaios resem 49 Oe MART a E E E E E E E caueeteeasneruneant 50 ILS VERINE oreen n E EE 50 D streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 Q3 1 PRODUCTION CHRACTERISTICS AND OVERVIEW 1 1 PRODUCT OVERVIEW SVT MDVR S28 is a Hybrid MDVR model specially designed for vehicle surveillance and remote monitoring combined with high speed processor and embedded operating system The advanced H 264 video compression and decompression wireless transmission and GPS location make S28 a very powerful and perfect solution for vehicle surveillance Especially this model is ideal for bus application because of the hardware and firmware design for station announcement It supports two hard disks Max 2TB storage features with modular design flexible installation easy maintenance and high reliability MDVR Features and Capabilities Revolutionary anti vibration for 360 degree installation Station announcement function supported for bus application Modular design for easy maintenance UPS Uninterrupted P
26. emperature TEMPERATURE e TEMPERATURE UNIT rich ALARM SETTING NAME OSD ENABLE THRESHOLD ALARM LOCK HIGH TEMP HT OFF D POLST WS LOW TEMP ao p If the MDVR working temperature is higher than the setting for HIGH TEMP MDVR will trigger alarm If the MDVR working temperature is lower than the setting for LOW TEMP MDVR trigger will alarm Eea www streamaxtech com ows Bereurvay Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice iy Streamax Manual S28 GUI 16CH 2013 _Q3 3 2 46 CAMERA Display the alarm information from camera MOTION DETECT SETTING CHID MD SENSITIVE M D AREA 68 0D SENSITIVE SETUP ALARM SETTING NAME OSD ENABLE BLINO BO MOTION VIDEO LOSS SAVE EXIT There are three statuses for camera alarm blind detect motion detect and video loss CH ID please choose the channel you want to setup for motion detect and blind detect SENSITIVE this is the detect sensitivity 1 is the most sensitive M D AREA this option is for user to setup the detect area as follow blank square means the area is selected please exits to the setup interface to save the settings Eea www streamaxtech com ows Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax 3 2 4 7
27. etadata information it will create a black box file in hard disk when you setup this switch The event files will be saved into the hard disk only in the condition that you enable this switch SD CARD TYPE For S28 MDVR SD card is used for mirror recording This means that the hard disk and SD card can record at the same time with same frame same resolution same image quality The main purpose for mirror recording is when the hard disk is broken like accident happens you can still get the video files in the last minute from the SD card A5 MDVR can provide 2 kinds of mirror recording internal and external Internal means that we have the SD card slot inside of MDVR device and you just need to insert the SD card in the slot on the MDVR device and ENABLE the switch for mirror recording on the MDVR GUI menu External symbolize that you need to buy the fireproof box SD card inside from Streamax in case the vehicle is on fire Eea www streamaxtech com ows a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax This fireproof box is specially design for the vehicle accident like fire and the maximum Manual S28 GUI 16CH 2013 Q3 temperature can be 500 Celsus degree can last 15 minutes MIRROR REC TO SD CARD The enable switch for mirror recording HDD SD OVER WRITE To make the HDD or SD card overwrite when there is only 8GB for ha
28. face you prefer to show CP3 menu interface or quad image interface Quad Image is for the regular monitor output display CP3 is the Streamax Manual S28 GUI 16CH 2013 Q3 designed Control Panel which can support one LED to display the image and realize the station announcement function the precondition is the MDVR device can support the station announcement function either CP3 Interface 2013 01 07 08 43 51 MONDAY SPO SPO MENU EXIT WATERMARK Waiter mark is to protect original data from illegal modification as long as you setup water mark we will find the difference when we analysis the record files EXPORT MINIPLAYER This option is for user to export Miniplayer IMPORT TTS FILE This option is for user to import TTS file for the audio announcer 3 2 3 NETWORK i FDE y m a BS SYSTEM Ss er EVENT MOBILE NETWORK FTP SETTINGS This part will explain how to setup the network function RJ45 cable connection WIFI connection 3G for MDVR First we need to know the PC software that the MDVR supports for A5 MDVR CMS Ceiba ADS CMS Central Management Software is the software to manage the vehicles real time via 3G Weenie www streamaxtech com ows a Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey R Streamax Ceiba is the playback and analysis software Manual S28 GUI 16CH 2013_Q3 A
29. ge for sensor1 when the alarm from sensor1 is triggered the image from channel 1 will change to be full screen And the priority is from sensor 1 to sensor 8 Sensor1 priority is highest Sensor 8 priority is lowest 3G ACT means you can define a sensor to active the 3G module as there is an active mode in 3G setup interface they are corresponding options SENSOR TRIGGER ACTION FULL SCREEN 3G ACT cH NONE CH3 CH4 FRONT PAGE SAVE e Eea www streamaxtech com gt Beana Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 _Q3 3 2 4 2 SENSOR OUTPUT Streamax S28 MDVR supports 2 sensor outputs All the alarm inputs can trigger the two sensor outputs such as sensor1 8 over speed temperature video loss and so on please access the menu GUI gt gt gt gt SETUP gt gt gt EVENT gt gt gt SENSOR OUTPUT as follow Remark Sensor out means when there is an event triggered the corresponding sensor out will give 12V 2A output and the duration is the alarm time you have setup so you can associate different sensor to different alarm types SENSOR ALARM OUTPUT ALARM TYPE OUTI SENSORI SENSOR2 SENSORI SENSOR4 SENSORS SENSORE SENSOR7 SENSORS GEO FANCING NEXT PAGE SAVE SENSOR ALARM OUTPUT ALARM TYPE OVERSPEED LOW SPEED HIGH TEMP LOW TEMP OFF A
30. gered at 10 30 then the record file start from 10 00 to 10 30 will pack as alarm record 3 2 2 2 OSD OVERLAY OSD OVERLAY ITEMS LIVE VIEW IMAGE POSITION DATE TIME OFF OFF TOP ACCEL DATA OFF TEMPERATURE OFF FIRMWARE VER OFF X CH NAME OFF VEHICLE NO OFF OFF NEXT PAGE SAVE dAn www streamaxtech com ows Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice iy Streamax Manual S28 GUI 16CH 2013 Q3 OSD OVERLAY PREVIOUS DATE TIME Display date and time on OSD POSITION Setup the display position for DATE TIME ACCELERATION Display the information for inertial sensor TEMPERATURE Display the temperature on OSD FIRMWARE VERSION Display the current firmware version CHANNEL NAME Display the channel name VEHICLE NO Display the vehicle NO RECORD is ON means it will record the date time channel name and vehicle NO into the record files To get the main information for MDVR working easier on QUAD view you can please just press Enter on remote control to show below screen This screen will show all the important working information for the MDVR including sensor 3G GPS WIFI signal and connection firmware version MCU version SIM dialed up status etc But the precondition for this OSD is you must setup the OSD overlay menu to select which information you want to dis
31. he MDVR during upgrading the firmware as this is very easily to damage the FLASH for MDVR 4 During the firmware upgrade then following screen will pop up System Updating 5 After upgrade success the MDVR system will restart automatically as follow a dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey ea Streamax Manual S28 GUI 16CH 2013 Q3 System Initializing Please check the firmware version after the MDVR reboot up and make sure that the firmware upgrade is completely successful MCU UPGRADE The step is the same as upgrade firmware _ If the FLASH is damaged or firmware crashes The MDVR can boot up to System Initializing interface only and the POWER LED on the MDVR is ON It cannot boot up to quad view interface For this situation please contact Streamax technical support trying to upgrade the firmware by TFTP upgrade 3 2 1 6 USER SECURITY Setup the password for user and admin USER SECURITY PASSWORD ENABLE on SELECTUSER USER PASSWORD RE ENTER PASSWORD ENABLE To active password access Selecting ON will require a password in order to access the setup menu USER PASSWORD User authority can only check the image from each camera can t modify any parameters ADMIN PASSWORD An Administrator with full rights dAn
32. ll specifications are therefore subject to change without notice ew Streamax Manual S28 GUI 16CH 2013 Q3 source Please select the REC SEARCH and enter into following screen FILE SEARCH 01 02 03 F TEE zr eee ope oei 1 12 131 15 7 18 25 26 27 28 29 30 31 SOURCE Source means which storage medium the recording files are saved into Hard disk is the main recording medium for MDVR S28 But this model can support SD card for mirror recording as well TYPE The type of the file including all file alarm file and normal file DATE MDVR system will display the current date automatically Please select the date you want to search from the calendar The date with record files is indicated by green The date with alarm file is indicated by red The date without video files is indicated by background color Please press SEARCH to enter into the below menu RECORD SEARCH B r a t Ta AE 00 00 00 AY END ME i 59 EXPOR a e CHANNEL As S28 support 8CH or 16CH so you have to choose the channels when you want to playback VIDEO FILE STATUS GREY mean there is no video file in this channel or no video during this period GREEN means the file is normal file RED means alarm file but not locked means the locked alarm files START TIME and END TIME The MDVR device can support the video clip function This time schedule is for both More informa
33. ncsacsauementecasmarsnsiae 30 3 2 2 5 MIRROR RECORD SETTINGS wes ccvaccescsvedivedsvesineicenivsawerssuccsassledaevareqsenesaensvcaw einen 31 I2 o aB TREAN eer a A E E E A coon teeaans 31 PLL S EDULE Sa E T T E entre 32 32 29 IP CAMERA SETTINGS cerenpcciirn innen E E 33 PLL OTHER SETHNG asia E E E E E E errr rrr 33 BL NERVORE o our ates recy ues eo N E E E N E A es 34 Iae DOCAL a ew cy tee ce E E A E AE 35 www streamaxtech com D streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey R Streamax Manual S28 GUI 16CH 2013_Q3 IL EIR EIR NETVOR ois crea toscneasenc E A N E E N 35 239 MOBLE NETWORK enire Sans sv coms ponerse Soe peeseyesetueuaecen 36 eoa FIP ETUNG o esse eect scouts A 38 eA EVENT oa E coat sane sanuaneeapeuereasseuceansyenseeai eiecenunsnratoeeiss 39 SLL EN OR r A E E E E E 39 PLAZ SENSOR OUTPUT parerii T ETEA 41 e PEE E A E pueente tec esnonese cieaneseneneeyeounenaceies 42 eee ACCELERATION corren E E E O EE eanaceneatoraass 43 PLS TEMPERATURE cE A E snceanorneecmueneeecaneeecaseornccaies 43 LAD CAMERA r A E E ee errr re 44 SLAF VOLT OE E E E ane oases tee edeseatecdocneanonieeneae ptutenstweiee 45 ILS PURE VA Viegas cos cogtnse cee E E E E 45 e Re N Lara tine arc estes E AE EEEE EEE E AAE erect pets ses sleet eden beast EEE ve ean see ease te tone 46 3 2 5 2 EXT C ON Pa greece ea waare ea sere E unw ha ee nsuoeaiiah uae
34. nnected PROTOCOL select the protocol of different PTZ there are two protocols to switch and the default is Pelco D BAUD RATE select the different baud rate for your PTZ there are 1200 2400 4800 and 9600 DATA BIT there are 5 6 7 8 options to select default setting is 8 STOP BIT there are 1and 2 to select the default setting is 1 VERIFY there are None Odd Even Mark Space to select the default setting is none ADDRESS Fill the code of respective PTZ 3 2 9 2 EXT COM SETUP This interface is for external accessory connection such as control pane PTZ Inertia sensor LED screen station announcement and so on MODE There are STANDARD and BUS MODE two options Standard mode the accessories connected to the ports are not fixed Bus mode COM1 can only be used for station announcement COM2 can only be used for amplifier board they are unchangeable COM3 and COM4 is changeable And 485BUS is switch for smart battery connection dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice gy Streamax Manual S28 GUI 16CH 2013 Q3 EXT COM SETUP STANDARD NONE NONE CONTROL PANEL ACCELERATION 485BU S a amp EXIT 3 3 INFORMATION HISTORY 4 MODULES SMART INFO muani e pavs te VER INFO wy gt i 3 3 1 SYSTEM Display the MCU version firmware ver
35. o format hard disk please select video storage and if you want to format SD card for mirror please select SD FORMAT DEVICE VIDEOSTORAGE USB SD N FU INFORMATION ALL DATA WILL BE DELETED AFTER FORMATED ARE YOU SURE TO FORMAT SURE EXIT FUNCTION FAST FORMAT SLOW FORMAT and HDD DETECT FAST FORMAT is the same as the fast format on PC SLOW FORMAT means the MDVR system will check whether the hard disk has bad sectors if so the MDVR will make a record and won t write data here again After format success MDVR unit will restart automatically 3 2 1 5 UPGRADE Upgrade to new firmware or MCU Eea www streamaxtech com gt Bia Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice iy Streamax Manual S28 GUI 16CH 2013 _Q3 UPGRADE ae FIRMWARE MCU CURRENT VERSION X5 4CH Tbc0223 UPGRADE FIRMWARE Upgrade the firmware MCU Upgrade the MCU HOW TO UPGRADE THE MDVR FIRMEARE 1 Please create one folder named dvrupgrade in root directory in thumb drive and then copy the firmware upgrade file to this folder 2 Insert the thumb drive into the USB port on the front panel of MDVR 3 Please access into the MDVR GUI menu UPGRADE select FIRMWARE option and press UPGRADE MDVR will upgrade the firmware automatically Please make sure you do not remove the thumb driver or cut of the power for t
36. ower Supply supported to protect the MDVR from the damage of high voltage and provide the power to the MDVR when the MDVR external power is cut off for example accidents happen Special file system NVRFSTM is professional for improving the security level of data providing self recovery function self check self backup for certain critical data and avoiding data fragment that affect system efficiency Dual streams one for local recording and one for wireless transmission 8 channel real time D1 at 100fps 120fps continuous or priority video recording and live view display Semi transparent GUI makes setting for GUI and live display synchronously Mirror recording makes the hard disk and SD card recording at the same time with same frame same resolution and same image quality Maximum 1 hour pre recording and 30 minutes post recording Watermark prevents any modification in recorded file which is part of the law enforcement Better Compression rate at H 264 50 less than MPEG4 Enhance recording storage rate in most efficiency way 16 channels for high fidelity digitally recorded synchronized audio matched to 16 video channels User friendly criteria to playback the event associated video Automatic timer to resume the live display if the unit is idle for user defined timings User selectable settings for quality and audio record enable disable for each video channel 12V power supply for multiple devices such as cameras sensors relays
37. pe Press ENTER to change the type of the recording mode Con Continuous recording Alarm Alarm recording hy dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey R Streamax Timer timing recording Schedule 1 2 Press the RIGHT ARROW key to enter values using the NUMERIC keypad into any time field Schedule 1 is the first of two possible ON OFF cycles that apply to any day in the period chosen Manual S28 GUI 16CH 2013 _Q3 under Date Schedule 2 is the second cycle for any day in the period There is no need to overlap times of Schedule 1 and Schedule 2 Ending at 23 59 of one day and beginning with 00 00 of the next day will provide continuous recording without interruption factory default setting 3 2 2 8 IP CAMERA SETTINGS IP CAMERA SETTINGS cHi3 oN G ON amp on 192 168 088 024 CH14 on E ON E ON Qs 192 168 088 023 3 2 2 9 OTHER SETTINGS OTHER SETTINGS INITIALIZE INTERFACE CP3 MENUM WATERMARK ON OFF INTERCOM SEMSOR OFF EXPORT MINIPLAYER Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax INITIALIZE INTERFACE This means after MDVR starts up which default inter
38. play dAn WwWww streamaxtech com ows Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ay amp Streamax 3 2 2 3 CAMERA SETTINGS Manual S28 GUI 16CH 2013_Q3 To setup record function and video for each channel CAMERA SETTINGS CAMERAENABLE NAME AUDIO LVE OFF orF N OFF orF N CH3 OFF OFF N CH4 OFF orF N CH5 OFF oFF N CH6 OFF orF N CH7 OFF OFF N CH8 OFF OFF ROUND OFF ff ROUND TIME 010 5 300 SEC IPINTERCOM OFF J LIVEAUDIO on N NEXTPAGE SAVE EXIT ENABLE Enable the record function NAME The name of the channel For example if you setup the name for CH1 is ABC you can see ABC three letters display on the video from channel 1 AUDIO Active the audio record function LIVE to enable the channel to display it in QUAD view ROUND Means channel loop function sequence if you setup time as 5 second which means the video screen will shift to different channels the sequence is from channel 1 to channel 4 in every 5 seconds IP INTERCOM This is the switch for intercom function we also say 2 way audio which means that that driver can talk with server directly via wireless network 3G When this switch is ON the audio of intercom will be recorded into channel 4 LIVE AUDIO enable or disable the live audio settings switch 3 2 2 4 RECORD SETTING Make the configurations for resolution frame rate image
39. quality parameter setting for each channel dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 Q3 RECORD SETTING COMMON PARA NORMAL ALARM CAMERA RES FR QUALITY QUALITY 25 N 25 N 25 N 25 N 25 N 25 N 25 N 25 N NEXTPAGE SAVE ooo owov wo ow KE KE Kd KEKE KE EE EE a a a a a a KEKE KE Ki KE Ke KEES RES Resolution D1 HD1 CIF optional For our system D1 resolution is 704576 for NTSC and 704 x 480 for PAL HD1 resolution is 704 X 288 for NTSC and 704 Xx 240 for PAL CIF resolution is 352 X 288 for NTSC and 352 X 240 for PAL FR Frame rate frames per second 1 25 or 1 30 for NTSC can be adjustable QUANLITY Image quality 8 levels optional Level 1 is the best Normal quality is the quality for normal record and alarm quality is for alarm record 3 2 2 5 MIRROR RECORD SETTINGS MIRROR RECORD SETTINGS MIRROR RECORD MAX CHANNELS 12 cower vee emea me CH1 ON CH9 ON 3 2 2 6 SUB STREAM Sub stream is the settings for 3G wireless transmission you can setup the bandwidth and enable the channels Otherwise it can t transmit the live video to PC software center server The setup interface as follow Pp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All
40. rd disk or 1G for SD card spare space left ON when hard drive space is less than 8G according to First in first out rule the MDVR system will start to delete the earliest record files till hard disk space equal or over 15G except the alarm file which in locked time OFF Device will stop recording when hard drive space is full less than 500M you must replace a hard disk or delete recording file manually then it will start to record LOCKED FILE RETENTION DAY For the MDVR video files you can lock or unlock them Lock function is only for the event alarm files as they are very important The locked files cannot be deleted by the HDD SD overwrite function in the retention days When the retention day is expired the locked files will be unlocked automatically and deleted Locked recording file save time can be configured to be 7 10 15 20 30 45 days During the retention time the locked recording files won t be deleted Once pass lock time the recording file LOCK identifier will be from L to U and then can be deleted automatically by overwrite function PRE RECORDED SWITCH ON OFF ON means open the function of pre recording OFF means not If you need to setup pre recording function you must open this switch and also setup the time for pre recording in this menu as well ALARM PRE REC TIME 1 60 MIN Pre record time setting is from 1 to 60 minutes For example If the setting for pre record is 30min when alarm is trig
41. refer to the manual for CMS Manual S28 GUI 16CH 2013 _Q3 EXPORT and IMPORT you can setup Geo fence and the CMS system can create one config file for Go fence You can import a Geo fencing config file from CMS software or from another MDVR also export to another MDVR Remark Geo fencing means you can setup a special virtual area for the vehicle when the vehicle enters into or out of this area the MDVR system will trigger the alarm For more details please check the CMS manual 3 2 2 RECORD Setup the related configuration for record OPTIONS SYSTEM j ree et i OSD OVERLAY i RECORD i ID CAMERA SETTINGS Sy i len NETWORK ma SETTING 1S VES il t gt RECORD EVENT or er y SUB STREAM SCHEDULE IP CAMERA OTHER SETTINGS 3 2 2 1 OPTION The menu is used to setup the basic parameters for MDVR recording OPTION 1 ALARM DURATION 3 30 SEC ALARM POST REC 30 1800 SEC BUZZER TIME SEC NEXT PAGE SAVE VIDEO TYPE PAL and NTSC optional The default setting is NTSC RECORD MODE Record mode three modes as following GENERAL When MDVR is power supplied and starts up the MDVR will start to record automatically Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax TIMER This is the switch to start the TIMER recording func
42. sion HDD status and SD card information 1 NO HDD means No HDD installed or the HDD is defective and cannot work 2 NO FORMAT means HDD installed but not formatted All the new hard disk must be formatted after installation 3 showing the detailed information for HDD means HDD works fine Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 _Q3 SYSTEM INFO FIRMWARE VERSION X5L 4 1c823331 MCU VERSION 28 D STM32 MCU T051801 SD HDD INFORMATION DEVICE CAPACITY FREE SPACE RECORD NAME GB GB CAPACITY HR Capacity This is the capacity for the hard disk recording after format Free Space the spare space for hard disk for recording Record capacity The time means that how long that the hard disk can recording based on the current configuration of the MDVR like image quality resolution frame rate with the free space 3 3 2 HISTORY The data for history information HISTORY INFO HIGHEST SPEED IN HISTORY OKMWMH 2012 05 13 15 57 43 TOTAL MILEAGE 0 00 MILE NEXT PAGE Pp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Streamax Manual S28 GUI 16CH 2013 Q3 HIGHEST SHOCK IN H
43. sor the wireless module will start to dial up and then connect to internet ACTIVE MODE ACTIVE MODE ALWAYS CALLISMS SOESOR PHONE 1 PHONE 2 PHONE 3 DIAL PARAMETER settings for SIM Card please check the setup as follow form DIAL PARAMETER USER NAME PASSWORD ACCESS NUMBER 997 Network Type Username Password Access number CDMA card card 777 EVDO card card 777 WCDMA Please check the APN with SIM card manufacture 99 GPRS card card Please check the APN with SIM card manufacture 99 1 EDGE card card Please check the APN with SIM card manufacture 99 1 TD SCDMA card card Please check the APN with SIM card manufacture 98 1 INTERCOM SETTINGS it s a switch for interphone function which can realize speak to center via SIM card a dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ey Streamax Manual S28 GUI 16CH 2013 _Q3 INTERCOM SETTINGS INTERCOM SWTICH ON 3 2 3 4 FTP SETTINGS The MDVR can be used as a FTP server it can be in IE remote login check equipment in hard disk video and download video file This interface is to setup the name and password to control the server limit FTP SETTINGS PASSWORD ENABLE ON OFF USER NAME admin PASSWORD If the local IP of MDVR is 192 168 3 233 you can log in the MDVR FTP server
44. tion T amp Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice Py Streamax playback locally playback on MDVR device and export export to thumb drive and playback on PC by MINI Manual S28 GUI 16CH 2013 _Q3 Player or Ceiba software You have to choose the channel first and then setup the start time and end time RECORD SEARCH CHANNEL 1 40 To NORMAL TIME 01 20 00 01 50 00 02 20 00 CH1 CH2 CH3 CH4 START TIME 01 20 00 PLAY UNLOCK END TIME 02 20 00 EXPORT EXIT UNLOCK you have to select the channel first and then unlock the locked files You can export the MDVR video files to external storage device for playback easily Just please input the start time and end time for the video from certain channel for local playback Or you can export the file during certain period to thumb driver or any external storage device and backup to computer for playback exe file This exported exe file can be playback easily by Streamax MINI player or Ceiba as following By Mini player By Ceiba software Zp dAn WwWww streamaxtech com gt Streamax Copyright 2012 2014 Streamax Technology Co Ltd All Rights Reserved All specifications are therefore subject to change without notice ay Streamax Manual S28 GUI 16CH 2013 _Q3 Please connect the external storage device with MDVR by USB port
45. tion Only you enable this switch MDVR will Manual S28 GUI 16CH 2013_ Q3 start to record at configured certain time setting in the TIMER RECORD menu based on the SCHEDULE menu EVENT This is the switch to start the event recording Only you enable this switch when event is trigged MDVR will create event record NORMAL REC RATE normal record rate two option NORMAL MDVR will start to record according to the setup of RECORD SETTING FRAME MDVR only record by frame the key frame for video in order to take less space of hard drive BUT when event is trigged MDVR will record according to setup of RECORD menu RECORD FILE TIME MIN Recording file packing size 15 30 45 60 minutes optional ALARM DURATION 3 30 SEC The alarm duration time all the alarm for same type considered to be one alarm during the time which is configured for alarm duration For example if the setting for alarm duration is 10 sec and during this 10 sec anther same type like panic button alarm triggered MDVR system will consider them to be one alarm event And the alarm start time will be reset based on the second time for alarm ALARM POST REC 30 1800 SEC Alarm post recording time BUZZER TIME buzzer alarm duration time setup when alarm is triggered OPTION 2 METADATACAPTURE OFF SD CARD TYPE MIRROR REC TO 0 CARD HDD SD OVERWRITE LOCKED FILE RETENTION DAY ALARM PRE REC TIME 1 60 MIN FRONT PAGE SAVE MEDADATA CAPTURE m
46. turning left right closing opening Manual S28 GUI 16CH 2013 _Q3 the door reversing etc Once these alarms are generated they can be sent to central server by 3G network EN Enable to active this function NAME Press ENTER on the Name field to display the soft keyboard Enter the text name to identify the source of each sensor connected to the unit OSD Input the numbers and characters they will be embedded into the alarm video files when alarms happen and it will also display in live view Please press Enter into the soft keyboard The label also identifies the type of event when doing a quick search using EVENT SEARCH option SET LOW normal close means the power level from high to low to trigger the alarm HIGH normal open means the power level from low to high to trigger the alarm ALARM Press ENTER to select between OFF or ON ON means when sensor triggered alarm LED will flash OSD will display in the live view a red A will display in each channel until re login the system with account the flashing will disappear also MDVR will record the event log and if the security set as OFF when you trigger the sensor there is no alarm LED flashing and MDVR won t record the event log LOCK To enable the event does not erase during the over write process of hard disk NEXT PAGE Sensor trigger action means setup the alarm linkage for each sensor for example you setup the image of channel 1 as the alarm linka
Download Pdf Manuals
Related Search