Building and Suite Security
Contents
1. Building and Suite Security INSUITE CONDOPLEX ALARM SYSTEM The Condoplex 2600 security system located near the suite entry door is an added security feature which monitors access to your suite through the front entry doors TO ARM Before arming ensure the Status Light is on steady Enter four digit alarm code The Armed Light will come on and an exit tone will sound for the duration of the exit delay i e 20 seconds TO DISARM on entry from the front entrance the entry warning tone is activated and you must enter your four digit access code within the entry delay time to disarm the panel Basic Programming Instructions ALL PROGRAMMING REQUIRES USER TO FIRST ENTER INTO PROGRAMMING MODE TO COMPLETE PROCESS USER MUST EXIT PROGRAMMING MODE If you do not have your Master Code please see your manager For security purposes you will be asked to provide Photo I D and proof of residency before it can be provided to you To enter Programming Mode 1 Press PROGR key and hold until a steady beep is heard All lights will turn off 2 Enter the Master Code The four center lights flash to indicate activation of programming mode To exit Programming Mode 1 Press PROGR key and hold until a second beep is heard The panel resumes to normal operation To Change or Add User Codes 1 Enter PROGRAMMING MODE 2 Press key 1 and hold until a second beep is heard All four top lights will flash 3 Press user number 1 to 9 twice or dure2. ss code 0 twice All bottom lights will flash and all top lights will be on steady If only the first bottom light flashes this indicates the selected user has no code Enter a new four digit code Re enter the same four digits The panel will give an audible tone verifying code acceptance Repeat steps 2 through 5 for any additional users Exit PROGRAMMING MODE NDN A To Change Alarm Duration Time 1 Enter PROGRAMMING MODE 2 Press key 2 and hold until second beep is heard The PANIC LIGHT will start flashing 3 Enter two 2 digits identifying the number of minutes for alarm duration 01 to 99 minutes Default is five minutes 4 Exit PROGRAMMING MODE To Change Exit Delay Time 1 Enter PROGRAMMING MODE 2 Press key 3 and hold until a second beep is heard The INTERCOM LIGHT will start flashing 3 Enter two 2 digits identifying the number of seconds for exist delay time 01 to 99 second 4 Exit PROGRAMMING MODE To Change Entry Delay Time 1 Enter PROGRAMMING MODE 2 Press key 4 and hold until a second beep is heard The SHUNT LIGHT will start flashing 3 Enter two 2 digits identifying the number of seconds for delay entry time 01 to 99 seconds 4 Exit PROGRAMMING MODE To Enable Disable entry exit tone 1 Enter PROGRAMMING MODE 2 Press key 6 and hold until a steady beep is heard The SHUNT and INTERCOM LIGHTS will start flashing 3 Enter two 2 digits identifying entry exit tone set
3. tings First digit identifies entry tone and the second identifies exit tone 4 Press 0 to disable and 1 to enable tone generated by the panel when in entry or exit mode NOTE both entry and exit tones cannot be disabled at the same time Should you require additional information please check the User Manual that has been provided Security Channel The lobby entrance can be brought up on visual display through your television set allowing you to see guests from within your home prior to allowing entry Panic Alarms If you feel there is a threat or an emergency while you are in the residents garage simply press the button on the access remote which will automatically activate the horns and strobe lights At this same time security will be notified of an alarm through the computer system and a channel of communication to the area will be opened As closed circuit cameras monitor the underground parking areas security will be able to view your location and alert the appropriate authorities The red button with a white cross on the access remote pressed within the residents suite if you are experiencing a medical emergency This alarm will send a signal to security that there is a medical emergency These devices are considered a part of and belonging to the dwelling unit If one of these combination devices is lost or stolen you must report it immediately to the Property Management Office at which time it will be de acti
4. vated from the system to avoid illegal entry into the building by non residents Replacements may be purchased from Property Management for a nominal fee Soliciting Solicitation on the property is completely prohibited Should you see someone suspicious please report it to Concierge Security as soon as possible If you receive a flyer at your door or witness someone distributing flyers please contact Concierge Security Intercom System There is an intercom system in which you are able to contact security through you alarm panel if necessary Remote Panic Station This is a two way communication intercom that has been installed in the garage and some common areas where the closed circuit cameras have been installed This allows anyone to communicate with security on a twenty four hour basis If you need assistance or if you experience trouble with your common area access devices please do not hesitate to contact security for assistance
Download Pdf Manuals
Related Search