Home

WHAT`S NEW - Xena Networks

1. XENA NETWORKS Release 49 released on January 28 2013 Versions XenaManager M 327 XenaServer S 322 XenaDriver D 30 Module 1 230 Xena2544 v11 Xena1564 v4 RFC2544 v74 RFC2889 v11 Test Module functionality e Support for new M2SFPT test module e Support for negative latency measurements e 24ns latency accuracy on latency measurements for 40 100G test ports improved from 64 ns e Bug fix false packet generation for certain low rate stream configurations XenaManager and Scripting e Stream cut amp paste mechanism e Compact grid based stream configuration view with limited multi stream edit functions e Cut and paste from Capture buffer to Stream Packet Header e Bug fixed 100 40G Loss statistics were not updated properly for higher stream ID values Xena1564 e First official release e CBSand EBS tests e Graphs in PDF reports e XML reports e Automation support e Sub folder support in service tree e Complete Wiki manual available www xenanetworks com XENA NETW Xena2544 Throughput test Added the L2 rate in Bps to the report in addition to the L1 rate Don t require all port pairs to have the same speed as long as each port in a pair has the same speed Option to override the default Xena TCP port number to support NAT gateways Display test status running stopped and elapsed test time in status line Program is now releasing used ports when closed down Now able to display negative
2. This allows for instance the use of IPv4 UDP protocol headers in 64 byte packets This feature is supported on the following test module types M6SFP M2SFP T M2SFP M12QSFP10 M2XFP M2QSFP for 10G ports M1CFP4QSFP28CXP for 10G ports Added support for MDI MDIX control for copper PHY ports M6SFP and M2SFPT Added support for selecting 512 1024 byte packet headers Added 40G 100G misordering checking Misorder insertion is currently not supported for 40G 100G Improved latency calibration for XenaBay chassis Added packet size range check for 40G 100G streams Added support for controlling and monitoring Remote Fault signaling for 40 100 ports Added support for current last second min max latency and jitter Increased the maximum measurable latency period from 2 seconds to 16 seconds for all testmodule types Bugfixes Errored Tx packet transmission for Jumbo packets for certain traffic rates Bug fixed in Modifier bit mask bit 13 Selection of local test module clock for latency measurements M6SFP Rx packet alignment not IEEE compliant Interoperability issue with Sumitomo a generation Sumitomo CFP LR4 on CAUI interface default de emphasis function by Sumitomo is now disabled XenaSetup and XenaChassisUpgrader First version Replaces the old Setup and Upgrader utility XenaManager 2G General New Features Improved testbed selection and management with new list oriented display Now possible to set cha
3. XenaServer S 386 Module 1 247 XenaManager 2G v1 2 Xenalntegrator v1 13 Xena2544 v2 10 Xena1564 v1 10 Xena2889 v1 5 Xena3918 v1 7 XenaScriptClient v21 XenaManager v362 www xenanetworks com BENA Special remarks Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X The older Xena2544 application is now end of life and all future feature upgrades are based on the new Xena2544 2G application which is now generally referred to as Xena2544 Test Module functionality No changes XenaManager 2G Added support for importing XenaManager v1 testbeds Added support for loading and saving testcases Save and restore window state maximized minimized normal Double click on modifier opens Edit dialog Added option to take a snapshot image of the stream charts to the clipboard Auto stop traffic on port if traffic no longer active Bug Fix crash when opening Username dialog Bug Fix failure to detect deleted stream after port refresh Bug Fix Fixed counter headers and tooltips for port level global statistics Bug Fix Fixed module latency reference config Bug Fix capture filter selection issues when creating and deleting filters Bug Fix Resource reservation check must take child reservation states into account Bug Fix failure to refresh capture result view for selected port when starting capture fr
4. 1375 e Fixed crash when using mouse scroll with collapsed result panel ticket 1375 Xena1564 Bugfixes e Failure to handle ARP requests for VLAN tagged UNI ticket 1361 e Fixed crash when using mouse scroll with collapsed result panel ticket 1375 www xenanetworks com XEN NETWORKS WHAT S NEW Xena Networks Release Note Release 60 3 Release Date June 10 2015 Software Firmware Versions XenaServer 410 TestModule Firmware 256 XenaL47Server 1 9 XenaChassisUpgrader 1 6 XenaConnect 1 3 8 0 XenaManager 2G 1 13 Xenalntegrator 1 14 Xena2544 2 25 Xena1564 1 14 Xena2889 1 13 Xena3918 1 13 XenaScriptClient 21 Layer 2 3 Test Module Functionality Bugfixes e Retrieving the latency of a captured packet using the scripting interface PC_EXTRA packet could in some cases return wrong data if the latency value was N A www xenanetworks com WHAT S NEW XEN NETWORKS Xena Networks Release Note Release 60 2 Release Date Software Firmware Versions June 9 2015 XenaServer TestModule Firmware XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient Layer 2 3 Test Module Functionality New features M1CFP4QSFP28CXP 409 256 1 9 1 6 1 3 8 0 1 13 1 14 2 25 1 14 1 13 1 13 21 e When setting the module in QSFP28 100G mode FEC is automatically enabled Bugfixes e Fixed bug where t
5. fix Working with test parameters when no connection was established with the chassis would crash the program Xena3918 Bug fix Not possible to modify Join to Traffic Delay value in Aggregated Multicast Throughput test Release 55 released on Januar 22 2014 Versions XenaServer S 368 XenaDriver D 30 Module 1 242 1 244 for M6SFP M2SFPT 1243 for M6RJ45P XenaManager M 351 Xena2544 v27 Xena2544 2G v2 Beta Xena2889 v2 Xena3918 v5 Xenalntegrator v11 Test Module functionality Support for new test module M6RJ45 Knows bugs poor latency accuracy for 1G 100M port speed modes Added support for IPv6 address wildcarding port property M2SFPT M2SFP T Advanced Timing support for presenting the recovered port0 1 clk on SMA output in 2 048MHz format in addition to 10 0MHz format Added new Auto Negotiation modes F10M HDX F100M HDX and AUTO 10 100 Improved accuracy of inherent latency calibration cancellation of transceiver delay www xenanetworks com SENA Scripting support for Menara OTU 2 transceivers Bug fix Fixed overrun signed problem for average latency for long term high latency tests Bug fix Improved Rx framing functionality for 10 100 1000M interfaces Bug fix IPv6 NDP will now also work for ICMPv6 packets which includes a VLAN tag Bug fix improved accuracy in scheduling of very low packet rates such as 1 pps Bug fix fixed scheduling errors for large packets sizes on 100G ports Bu
6. fix dynamic loss counter would saturate at 16M when packets are experiencing misordering as they traverse the DUT network Bug fix when using a stop trigger to capture packets the timestamp will now be valid for the previous 16 seconds period leading up until the stop event improved from 2 secs to 16 secs Bug fix improved loss detection algorithm so that loss is detected correctly even when there is significant reordering but still with some exceptions at the first last packet first packet lost gt is not detected first packet mis ordered gt the packet will be counted as lost last packet mis ordered gt the reported loss is less than the actual loss XenaManager Support for joining up to eight multicast sessions Global Statistics save function the ability to save global statistics in CSV format Tx and Rx statistics in the same file and for all used ports Support for IPv6 addresses with NDP support Added support for a user configurable transmit period and display of the time elapsed since transmit start Bug fix SR4 ports used in 10G mode would show as CFP unknown in XenaManager port browser Xena2544 Added full support for IPv6 including NDP for MAC address resolution Increased all test rate value decimals from 2 to 3 Added option to allow control of Address Range for looped ports Before this change both ends of a looped port would automatically be affected by a defined Address Range but now it can be
7. future maintenance focus is thus shifted to the new XenaManager 2G application Test Module Functionality New Features e Improved performance and reduced power consumption of CFP4 and QSFP28 ports on M CFP4QSFP28CXP XenaSetup Bugfixes e Added missing registration of tool configuration file extensions www xenanetworks com XENA Xena Networks Release Note Release number Release 57 1 Release date December 15 2014 Versions XenaServer S 400 Module 1 251 XenaChassisUpgrader v1 1 XenaManager 2G v1 6 Xenalntegrator v1 14 Xena2544 v2 17 Xena1564 v1 13 Xena2889 v1 9 Xena3918 v1 10 XenaScriptClient v21 XenaManager v362 Special remarks The old Setup program has been replaced with a new Windows Installer MSI compliant Setup program which also features a proper uninstaller The new Setup program will automatically remove all existing tools installed with the old Setup program The chassis upgrade functionality has been moved to another new tool the XenaChassisUpgrader Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X The old XenaManager application is now end of life and will not be maintained anymore It is still shipped as part of the release but will be removed completely in the future Most of the new features in this release are not supported by XenaManager All futur
8. latency values Bug fixed Enable Remote Loop MAC Address field immediately after setting port in loopmode Bug fixed Fixed broken validation of test parameters Dependencies between values will now be lazy evaluated i e when the test is attempted started and not when the value is changed Bug fixed Force 96x96 DPI resolution for custom report logos to avoid unwanted image scaling Bug fixed bug in counter poll timer calculation Bug fixed failure to properly apply a Mixed frame size selection Bug fixed failure to set configured port speed when loading configuration Excel2 544 Bug fixed Connect gt Save Results a Charts are now saved correctly under Excel 2007 b Deletion of the dummy sheets Sheet 1 2 3 in the saved results file now also works in non English versions of Excel www xenanetworks com XEN NETWORKS Release 48 released on November 16 2012 Versions XenaManager M 314 XenaServer S 317 XenaDriver D 30 Module 1 220 except 1 228 for M2XFP b M2SFP T M2SFP c Xena2544 v8 RFC2544 v72 RFC2889 v10 New features e Support for Menara XFP OTN OTU 2 optical transceivers Excel2544 e Initial support for IPv6 Port gateway MAC addresses must be filled in manually e Improved IP to MAC mapping when using multiple IPs e New preference for automatic ARP table keepalive Preferences gt Layer 3 IP MAC announcment interval sec e Added legacy support for older tester software wh
9. linked to throughput results ticket 1194 Xena2889 Bugfixes Fixed failure to handle toggle sync state for 10GBase T ports Xena3918 Bugfixes Fixed failure to handle toggle sync state for 10GBase T ports www xenanetworks com www xenanetworks com XENA NETW Xena Networks Release Note Release 58 Release Date February 19 2015 Software Firmware Versions XenaServer 403 XenaChassisUpgrader 1 2 XenaConnect 1 0 XenaManager 2G 1 7 Xenalntegrator 1 14 Xena2544 2 20 Xena1564 1 14 Xena2889 1 10 Xena3918 1 11 XenaScriptClient 21 Release Highlights This release is mainly focused on supporting the new layer 4 7 test platform The layer 2 3 test software versions are identical to the versions released in 57 3 with the notable exception of the original XenaManager This tool has been removed from the release as it is now 100 replaced with the new XenaManager 2G tool XenaConnect is a Windows client for configuration and generation of stateful TCP on Xena s new layer 4 7 chassis With XenaConnect the user can specify milions of TCP connections in switched routed or NAT topologies XenaConnect also has extensive stats and reporting which can be exported directly to pdf Special remarks The old XenaManager application is no longer part of the release www xenanetworks com SENA Xena Networks Release Note Release 57 4 Release Date February 26 2015 Software Firmware Vers
10. of the incoming Pause Flow Control frames could be dropped i e not reacted to when the test port speed is 10 100M www xenanetworks com XEN N ET W A p Release 34 released on October 12 2011 New Features e Automatic UDP checksum calculation for the 2 port SFP test modules M2SFP b only for packet sizes in the 56 1950 byte range UDP checksum 0 for Jumbo packets e L3 rx 2 tx loop mode for the M2SFP b card will be added to all test module types in next release Bug Fixes e When using a random packet size range in certain min max combinations a very small fraction of the packet could be generated with a packet size exceeding the maximum configured packet size www xenanetworks com XENA NETW Release 33 released on October 7 2011 New Features e Global statistics view for ports and streams in XenaManager GUI Bug Fixes e Certain stream rates on 100 40G test ports could cause a server abort e L2 Rx 2 Tx port loop did not work on test ports in a XenaBay chassis www xenanetworks com XE N W oR KS Release 32 released on September 7 2011 New 100 40G Features Service defect monitoring Bandwidth profiles per stream bursty uniform Real time packet loss counters Latency measurement with 64 ns accuracy Latency calibration MAC training Payload checksum error analysis Enable disable FCS checksum insertion per stream Bug Fixes For 100 40G po
11. packet using the scripting interface could crash the chassis firmware if the latency value is N A e Pv4 header could not be placed beyond byte offset 64 XenaChassisUpgrader New features e Better progress display for module firmware operations Bugfixes e Deselect upgrade state when chassis is unused XenaManager 2G Bugfixes e Fixed handling of Count value in IP modifier view ticket 1341 e Prevent unresponsive behaviour when viewing large capture packets ticket 1332 e Fixed parsing of MAC Ctrl segments ticket 1313 e Improved poll performance by not updating port sync state unless it has changed e Improve handling of port to port loopback for port peer e Don t try to start traffic or clear stats on non reserved ports e Limit stream rate to available port rate on stream bulk creation e Fixed parsing of Q in Q VLAN stack e Various bugfixes for Stream Wizard e Fixed handling of old and new 100G module port and media configuration e Fixed failure to announce new testbed when creating new test configuration Xena2544 Bugfixes e Unable to execute test on M2QSFP ports ticket 1337 e Unable to set speed for 1OGBASE T ports ticket 1309 e Wrong modifier handling for VLAN tag ticket 1311 Xena2889 New features e Added support for setting port speeds to 10M 100M HDX mode Bugfixes e Incorrect configuration of MDI MDIX settings could cause port to loose sync state while traffic was started ticket 1314 www x
12. to Bit s Bug fix Command line tool now more robust towards invalid characters in path strings Bug fix Fixed crash when using custom report directory and default report directory has not been created Bug fix Added more significant digits to loss values Bug fix Fixed unit string for frames sec from Frames to Fps Bug fix Prevent setting MAC modifier for L3 when IP gateway is specified Bug fix Enable MAC modifier for L2 traffic when not in modifier mode Bug fix Fixed misaligned CSV columns for intermediate results www xenanetworks com WENA N T e Bugfix Fixed bad jitter values in intermediate results CSV log Xena2544 G2 e First official release of 2 generation RFC 2544 with asymmetrical test support Xena2889 e Bugfix Improved handling of invalid Duration values e Bugfix Added missing support for iteration handling e Bugfix Added check for no testtypes enabled Xena3918 e Added option to specify maximum Join Leave packet rate e Added display of current duration counter e Added option to specify the latency offset value for each port e Bugfix Stop Join refresh timer when test is cancelled by user e Bugfix Fixed crash during report generation for Capacity Test when no valid results had been obtained e Bugfix Fixed inability to edit segment MC and UC protocol segment definition fields e Bugfix Fixed handling of default client protocol value in server protocol segment XenalIntegrator e
13. values 103 207 and 416 Hz www xenanetworks com XENA VETW Release 45 released on October 23 2012 Versions XenaManager M 310 XenaServer S 313 XenaDriver D 30 Module 1 220 1 227 for M2XFP b M2SFP T RFC2544 v69 RFC2889 v9 Bug fixes for M2SFP T test module e The SMA output signal was not locked precisely to Tx Clk e The Tx Clk Filter setting were not effectuated e Clik filter bandwidths up to 7000 Hz now supported by SMA output www xenanetworks com XENA NETW Release 44 released on October 22 2012 Versions XenaManager M 310 XenaServer S 312 XenaDriver D 30 Module 1 220 1 227 for M2XFP b M2SFP T RFC2544 v69 RFC2889 v9 New features e Changes to the module local clock ppm setting will now be reflected in packet per second statistics Bug fixes e Non effective setting of module local clock ppm a problem in XenaRelease_43 www xenanetworks com BENA Release 43 released on October 16 2012 Versions XenaManager M 310 XenaServer S 311 XenaDriver D 30 Module 1 220 1 227 for M2XFP b M2SFP T RFC2544 v69 RFC2889 v9 New features Added script command C_TIMEOUT n which sets the timeout for TCP IP script connections to n seconds so you can effectively disable the session timeout function by setting it to a number like 1000000 in which case the script user must be careful to explicitly close all script TCP IP sessions to avoid exhausting the chas
14. would fail if more than one framesize was defined ticket 768 www xenanetworks com XENA N ET W Xena2889 e Allow user to specify the mode for allocation the Test Port MAC address for address caching and learning tests ticket 682 e Enable logging of intermediate results to CSV file ticket 773 e Allow setting DMAC of learning frames for address caching and learning rate tests to broadcast address instead of the default test port MAC ticket 843 e Allocate capacity test port MAC address in same range as the learning addresses This may help finding the true MAC learning table size e Bugfix Fixed naming error in Address Learning report ticket 772 e Bugfix The used learning rate in Address Learning test would not use the rate iteration settings but would always be set to 100 e Bug fix Ports was not sorted correctly in result panels and reports e Bugfix Fixed inactive configuration controls for Address Learning Rate test Xena3918 e Added option to configure a multicast group sweep for the Latency and Burdened Latency tests ticket 859 e Bugfix Fixed missing display of intermediate results for capacity test ticket 857 e Bugfix Fixed wrong X axis label for Aggr MC Throughput report graph e Bugfix Multicast Group range definition was not utilized for Aggr MC Throughput and Mixed Class Throughput tests Xenalntegrator e No changes Release 56 2 released on July 4 2014 Versions
15. 0 XenaManager 2G 1 13 Xenalntegrator 1 14 Xena2544 2 27 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New features M6RJ45 and M2RJ45 e Support for Energy Efficient Ethernet in 1G mode on new PCB revision S N 236030 and above Bugfixes General e Fixed bug from R60 3 where loading a port config on certain module could cause the chassis to crash M6RJ45 M2RJ45 e Latency calibration now takes the extra TX latency introduced by Energy Efficient Ethernet into account M1CFP4QSFP28CXP e Passive copper cables are now shown as CR4 instead of ACC Active Copper Cable e Automatic RX tuning is now only performed when sufficient signal is received by the PHY This improves automatic tuning when using passive electrical transceivers like CR4 cables or electrical loop devices www xenanetworks com XENA N ET W y ve 5 Kk D Xena2544 Bugfixes e Failure to plot latency charts when iterations gt 1 e Fixed crash when using mouse scroll with collapsed result panel ticket 1375 Xena2889 Bugfixes e Fixed crash when using mouse scroll with collapsed result panel ticket 1375 Xena3918 New features e Write generating program version in PDF reports Bugfixes e Report formatting problem when test failed and no data was obtained ticket 1376 e Fixed auto calculation of default IP gateway e Improved ARP handling with retries if first request times out ticket
16. 015 XenaServer TestModule Firmware M6RJ45 M2RJ45 M1CFP100 M2CFP40 M2QSFP M1CFP4QSFP28CXP All others XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient Layer 2 3 Test Module Functionality Bugfixes M1CFP4QSFP28CXP 417 257 258 258 258 262 256 1 15 1 7 1 4 9 0 1 17 1 14 2 28 1 16 1 14 1 14 21 e Bug which sometimes caused large captured frames to be presented to the user out of order e Bug which could sometimes cause FCS errors at the output of the TX when traffic is stopped www xenanetworks com i c N gt XENA NETWORKS Xena Networks Release Note Release 61 4 Release Date August 14th 2015 Software Firmware Versions XenaServer 416 TestModule Firmware M6RJ45 M2RJ45 257 M1CFP100 258 M2CFP40 258 M2QSFP 258 M1CFP4QSFP28CXP 261 All others 256 XenaL47Server 1 15 XenaChassisUpgrader 1 7 XenaConnect 1 4 9 0 XenaManager 2G 1 17 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New Script API changes e P_PAUSE react to pause frames setting can no longer be changed while traffic is ON Behavior changes M1CFP4QSFP28CXP e Port reset no longer triggers a retuning on CFP4 and QSFP28 interfaces unless FEC mode has been changed from the default OFF for CFP4 and QSFP28 40G ON for QSFP28 10
17. 0G Bugfixes M1CFP4QSFP28CXP e Fixed bug where enable disable react to pause frames could cause the TX engine to end upin a bad state www xenanetworks com XEN NETWORKS Xena Networks Release Note Release 61 3 Release Date August 12th 2015 Software Firmware Versions XenaServer 415 TestModule Firmware M6RJ45 M2RJ45 257 M1CFP100 258 M2CFP40 258 M2QSFP 258 M1CFP4QSFP28CXP 260 All others 256 XenaL47Server 1 15 XenaChassisUpgrader 1 7 XenaConnect 1 4 9 0 XenaManager 2G 1 17 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New features M1CFP4QSFP28CXP e Added support for User Defined Fields Bugfixes M1CFP4QSFP28CXP e Fixed bug where flow control pause frames on the RX side could cause FCS errors at the TX output www xenanetworks com XEN NETWORKS Xena Networks Release Note Release 61 1 Release Date July 9th 2015 Software Firmware Versions XenaServer 413 TestModule Firmware M6RJ45 M2RJ45 257 M1CFP100 258 M2CFP40 258 M2QSFP 258 M1CFP4QSFP28CXP 258 All others 256 XenaL47Server 1 15 XenaChassisUpgrader 1 7 XenaConnect 1 4 9 0 XenaManager 2G 1 17 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New features M1CFP4QSFP28CXP e Support for revision B M1CFP4QSFP28CXP b Bug
18. 18 v1 6 XenaManager v361 Special remarks Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X Test Module functionality Support for new Test Module M2QSFP Support for new Test Module M12QSFP10 Support for new Test Module M2RJ45 Support for new XenaCompact C1 M2SFP 4SFP Added support for new capture until user stop feature except for 40 100G port speeds Support for GTP v1 and GTP v2 with optional GTP header fields M2SFPT Increased number of Modifiers from 2 to 6 per stream New extended 24 bit Modifier for 40 100G ports Support for optical Rx power reading on CFP SR10 optical transceivers 2 gen transceivers New Port Property configurable weights per 16 pre defined packet lengths for the MIX packet length distribution configurable from scripting Support for TCP packet header protocol format with hardware generated checksum Reduced number of filters per port from 6 to 4 for older 1 generation M2SFP XFP Test Modules www xenanetworks com SENA Bug fix no false Link Sync reporting for unconnected 10G from M1CFP100 M2CFP40 in 10G modes Bug fix traffic stop when transmitting from 100G port to 10G port could result in spurious falsely reported packet losses Bug fix false reporting of packet loss for certain streams with small packets burst profiles Bug fix spurious rare temporary
19. 2544 v2 9 Xena1564 v1 10 Xena2889 v1 3 Xena3918 v1 6 XenaScriptClient v21 XenaManager v362 Test Module functionality e Bugfix certain stream rates and burst profiles causing FCS errors on Tx side for 40 100G ports XenaManager 2G e Added GTP v1 and v2 segment types www xenanetworks com WENA e Added Capture User Stop option e Added support for configuring MIX weight distribution for packet lengths e Auto select first filter when setting histogram Which Packets to Filter e Added right click option to stream config grid e View name of last loaded config file for port e Bug fix Disable stream rate and burst config when port mode Sequential e Bug fix Disable changes to stream enable state when state is Disabled and traffic is ON e Bug fix Convert stream enable state Disabled to Suppressed when traffic is ON e Bugfix Fixed excessive filter panel refresh when port polling active e Bugfix Fixed wrong initial enable state for stream packet size fields e Bug fix Fixed update of Port Tx Time Elapsed when port traffic is on e Bug fix Fixed auto detection of Xena tools for ribbonbar e Bugfix Allow only capture Keep All for 40 100G ports when using any other capture stop criteria than Until Full e Bug fix Improved performance of capture view with large number of packets e Bug fix Removed Count parameter from histograms as this is not currently supported by the Xena server e Bug fix Preven
20. Added support for ARP wildcards on destination testport when using modifier on IP destination address field e Bugfix Fixed crash starting a poll when not all chart types was selected e Bugfix Fixed failure to correctly display loop configuration for an ASD port Release 54 released on October 24 2013 Versions XenaServer S 350 XenaDriver D 30 Module 1 237 1 241 for M6SFP M2SFTT XenaManager M 344 Xenalntegrator v9 Xena2544 v22 Xena1564 v10 Xena3918 v2 Xena2889 v1 Excel2544 v74 Excel2889 v17 www xenanetworks com SENA Special remarks Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator now require the Microsoft NET 3 5 Framework It is necessary to have the full framework installed and not just the Client Profile The location for Xena2544 Xena1564 Xena2889 Xena3918 application data configuration files log files report files etc have been moved to the user Documents directory This is done to enable write access for non administrative users Each tool will automatically migrate existing files from the old location to the new location the first time the tool is started Test Module functionality Xen Xen Xen Bug fix after power on some statistics would not be cleared to zero Bug fix after power on the first received packet would be FCS corrupted on M6SFP module Bug fix just after traffic ON one random packet length could exceed the specified maximum Bug fix additional fix t
21. IP address formatting in stream header configuration window Add Rx statistics for 1 second latency and jitter Global RX log creates of log file containing all per port log file entries Bug fix Save test case name can now accept and other special chars Xenalntegrator Introducing the new Advanced Stream Editor The port Logging CSV log file format has changed so that each value is no longer prefixed with the value name like lt name gt lt value gt Instead a standard CSV column header has been introduced Special log messages will now be encapsulated in brackets notation i e lt message gt These special messages can indicate logging start stop connection loss and restoration etc Added support for logging latency and jitter counters for selected ports Bug fix The Log Archive File Size field value should have been in Mbytes but was treated as if the unit was bytes It will now use a unit of Mbytes as intended Note Existing configurations will have to be updated if they tried to deal with the bug by entering a value expressed as bytes Bug fix Prevent removal of chassis with ports used in current configuration Xena2544 New option to automatically load last used configuration Prevent removal of chassis with ports used in current configuration Accurate test duration for small test periods 1400 sec for 1G ports 140 sec for 10G ports 35 sec for 40G ports 14 sec for 100G ports Bug fix Un reserving a modul
22. WENA N E WHAT S NEW Xena Networks Release Note Release 62 5 Release Date October 1st 2015 Software Firmware Versions XenaServer 422 TestModule Firmware M2SFPP4SFP 263 Others 262 XenaL47Server 1 23 XenaChassisUpgrader 1 8 XenaConnect 1 5 27 0 XenaManager 2G 1 20 Xenalntegrator 1 14 Xena2544 2 33 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New Features and optimizations M1CFP4QSFP28CXP e Added check and correction for bad transceiver EQ settings on the RX host interface between QSFP28 transceivers and the on board PHY e Optimized auto tuning function which would sometimes not be triggered correctly e Added special support for Source Photonics QSFP28 LR4 SPQCELRCDFL rev 01 transceiver which needs special settings to work Behavior changes M1CFP4QSFP28CXP e Port reset P_RESET no longer resets the PHY settings TX Equalization and FEC enable e Default TX preemphasis setting of 15 is no longer automatically applied to CR4 cables see above Set manually if required Bugfixes General e Fixed bug in refresh of received TIDs on RX ports which could otherwise sometimes cause short Stalls in the server 40G 100G ports e Insome cases packets were missing from the capture M1CFP4QSFP28CXP www xenanetworks com BENA Link was disrupted brought down and the retuned if FEC Enable was set to the same value as previously i e by loading a po
23. _CAPTURE_SIZE scripting command for FULL or truncated packet capture Bugfixes Fixed a bug which could cause port state to hang in state PREPARE seen with multiple connection groups Fixed a bug which could cause post run statistics not to be cleared seen with multiple connection groups Fixed a bug in HTTP get request response XenaChassisUpgrader New features Added support for new XenaScale product XenaManager 2G New features Show type of PRBS used in 40 100G port property view Added Stream Preview option to right click menu ticket 1211 Added Port Preview option ticket 1211 Allow sorting of global statistic grids by clicking column headers ticket 1211 Added Query value option to IGMPv2 Type protocol field ticket 1253 Added option to specify up to 8 multicast addresses for port Join Leave Added new stream Seq Packets property for use when port is in sequential mode ticket 1193 www xenanetworks com SENA Bugfixes Don t show confirmation if Save Port Configuration dialog is cancelled ticket 1229 Stream grid Use For All did not work for decimal rate values ticket 1228 Disconnected chassis entry in treeview had invalid right click options Default value for stream Seq Pkts property set to 1 ticket 1213 Port sequential Tx rates did not auto adjust correctly ticket 1213 Port sequential Tx rates was not capped according to max port speed Don t remove ports from testbeds wh
24. c limit ticket 993 PortTxRatePcnt not present in XML report for per port results ticket 1074 Xena1564 Migrated to use Microsoft NET 4 0 Xena2889 New Features Migrated to use Microsoft NET 4 0 Added support for enabling micro TPLD for streams Added support for setting MDI MDIX for supported ports www xenanetworks com XENA N ET W e Added option to add custom port rate cap values ticket 1022 Bugfixes e Not possible to remove chassis from configuration ticket 914 Xena3918 New Features e Migrated to use Microsoft NET 4 0 e Added support for enabling micro TPLD for streams e Per port unicast protocol segment profile e Added CSV report option e Added option to add custom port rate cap values ticket 1022 Bugfixes e Not possible to remove chassis from configuration ticket 914 Xenalntegrator e Migrated to use Microsoft NET 4 0 www xenanetworks com BENA Release 56 4 released on November 3 2014 Release number Release date Versions Special remarks Release 56 4 November 3 2014 XenaServer S 388 Module 1 247 XenaManager 2G v1 5 Xenalntegrator v1 13 Xena2544 v2 13 Xena1564 v1 12 Xena2889 v1 7 Xena3918 v1 8 XenaScriptClient v21 XenaManager v362 Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X The older Xena2544 appli
25. cation is now end of life and all future feature upgrades are based on the new Xena2544 2G application which is now generally referred to as Xena2544 Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator now require the Microsoft NET 3 5 Framework It is necessary to have the full framework installed and not just the Client Profile Test Module functionality e Bugfix errored Tx packet transmission for Jumbo packets for certain traffic rates www xenanetworks com BENA Release 56 3 released on September 4 2014 Versions XenaServer S 386 Module 1 247 XenaManager 2G v1 5 Xenalntegrator v1 13 Xena2544 v2 13 Xena1564 v1 12 Xena2889 v1 7 Xena3918 v1 8 XenaScriptClient v21 XenaManager v362 Special remarks Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X The older Xena2544 application is now end of life and all future feature upgrades are based on the new Xena2544 2G application which is now generally referred to as Xena2544 Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator now require the Microsoft NET 3 5 Framework It is necessary to have the full framework installed and not just the Client Profile Test Module functionality e No changes XenaManager 2G e Removed beta version warning e Added Tools menu item to open Windows Explorer in the Xena data direct
26. ce Defect Gap monitor events when reaching 262k events no rollover of For port MAC learning packets changed ETH TYPE from 0x0000 to OxFFFF Bit Error Rate now also included in saved port statistics CSV file www xenanetworks com MENA Release 40 released on June 2 2012 Versions XenaManager M 278 XenaServer S 290 XenaDriver D 30 Module 1 218 RFC2544 v64 RFC2889 v8 New features e Added new packet scheduling modes Normal stream interleaved mode Standard scheduling mode precise rates minor variation in packet inter frame gap Strict Uniform New scheduling mode with 100 uniform packet inter frame gap minor deviation from configured rates Sequential packet scheduling sequential stream scheduling Streams are scheduled continuously in sequential order with configurable number of packets per stream e JAVA scripting library http xenanetworks com html resources html e Xena help changed into online wiki http wiki xenanetworks com XenaManager improvements e After loading a port config in XenaManager the file name is now shown on port properties RFC2544 e Added new basic functions for faster TCP communication with the testers e Added support for Mesh gt Mesh testing when using UDP packet headers and small 64B packets Bug fixes e For bursty traffic profiles the packet burst will now always include the number of specified packet in the burst period bursts no occasional half bur
27. controlled if both ends or only the source or destination end of the looped port should be affected Added option to set a speed reduction value sweep on all used ports This will improve latency measurements for multipoint configurations block and mesh for ports on the same test module www xenanetworks com SENA e Now showing total average latency and jitter in progress and results panels and also in the final PDF report e Bug fix Throughput result for multiple iterations was reported as the max value and not as the average value as it should e Bugfix Fixed handling of chassis login error due to invalid password e Bug fix Fixed validation of latency values which could be invalidated by an invalid current value e Bugfix Fixed port reservation problem if ports were reserved on configuration load and user initially declined to forcibly relinquish the ports e Bug fix Fixed packet rate rounding error for L2 non native MAC address mode e Bugfix Fixed crash in Xena2544 command line client for PCs with NET 2 0 SP1 Xena1564 e Added full support for IPv6 including NDP for MAC address resolution e Improved burst tests so that larger burst sizes can be used Before the maximum burst size was equal to lt framesize gt x 500 Now it is virtually unlimited e Fixed validation of latency values which could be invalidated by an invalid current value e Added tooltips to result grid column headers explaining the various results e B
28. ded new option to Latency test to let initial and max rates be derived from the Throughput Maximum rate instead of the port rate e Added Explorer Xena Data Directory menu option to the File menu e Added Create Support Archive menu options to the Help menu www xenanetworks com SENA Enabled setting the port Auto negotiation property from the Ports panel Also show the Tx and Rx rate in Bps in the Throughput counter progress grid Also show the Tx rate in Bps in the Throughput counter result grid Allow mixed port speed in PAIRS configuration The port speed used in calculations for a pair is now forced to lowest speed in pair similar to setting a custom port speed in the port panel Added option to keep intermediate test results in the result grid The default value is Disabled as this was the behavior before the change The option can be enabled by clicking the Options Keep Intermediate Added an experimental option to improve the search for the zero loss throughput rate The default value for this option is Disabled which means that the traditional search algorithm is used The option can be enabled by clicking the Options Use Optimised Rate Search menu item Bug fix Don t crash if commandline loaded config does not exist Bug fix Fixed crash when using the Reconnect to chassis option Bug fix Don t try to set auto negotiation for ports that does not support it Bug fix Add missing loss and B2B results i e all but the
29. e maintenance focus is thus shifted to the new XenaManager 2G application Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator now require the Microsoft NET 4 0 Framework Client Profile www xenanetworks com 2E N NETWORKS Test Module Functionality Bugfixes e On M2QSFP modules the 40G 100G CAUI configuration and monitoring was swapped between the two ports on XenaBay systems XenaChassisUpgrader New Features e Added warning when upgrading chassis with expired software maintenance license XenaManager 2G e No changes Xena2544 Bugfixes e Port synchronized start feature was enabled by default ticket 1078 e Enforce proper port stream ordering according to RFC 2889 section 5 1 3 Xena1564 e No changes Xena2889 Bugfixes e Port synchronized start feature was enabled by default ticket 1078 e Enforce proper port stream ordering according to RFC 2889 section 5 1 3 Xena3918 Bugfixes e Port synchronized start feature was enabled by default ticket 1078 e Enforce proper port stream ordering according to RFC 2889 section 5 1 3 Xenalntegrator e No changes www xenanetworks com XENA Xena Networks Release Note Release number Release 57 Release date December 8 2014 Versions XenaServer S 399 Module 1 251 XenaChassisUpgrader v1 0 first version XenaManager 2G v1 6 Xenalntegrator v1 13 Xena2544 v2 16 Xena1564 v1 14 Xena2889 v1 8 Xena3918 v1 9 XenaScrip
30. e would crash the program www xenanetworks com XENA NETW Bug fix Removing a chassis would not trigger chassis renumbering Bug fix Packet loss reported in progress counter display was inaccurate Bug fix Ensure that all used ports are released before exiting the program Bug fix Prevent removal of chassis with ports used in current configuration Bug fix Fixed report table overflow for large counter values Bug fix Fixed latency chart display when inheriting threshold levels Xena1564 Added performance test session log which shows the time for any threshold crossing events New option to automatically load last used configuration Enabled use of single UNI in remote loop mode Bug fix Fixed port reservation and release at load and shutdown Bug fix Prevent removal of chassis with ports used in current configuration www xenanetworks com XENA N ET W gt ve 5 Kk Release 50 released on February 17 2013 Versions XenaManager M 329 XenaServer S 324 XenaDriver D 30 Module 1 230 Xena2544 v11 Xena1564 v4 RFC2544 v74 RFC2889 v11 Test Module functionality e Improved scheduling accuracy rates packet spacing e Adjusted transceiver latency calibration for T series Test Modules e The SMA output can be set to Port 0 1 Recovered Rx clock independent of the selected Tx clock source e Bug fixed when SMA output Recovered clock 10MHz the clock was at nominal 10 3MHz www xenanetworks com
31. eback button on application backstage introduced XenaChassisUpgrader New features e Added support for legacy RHEL based test chassis www xenanetworks com XENA NETWORKS XenaManager 2G New features e Added Stream Wizard e Added support for extended ARP and NDP function e Added support for Pseudo Wire Ethernet Control Word segment definition ticket 1269 e Added initial support for RFC 7348 VXLAN header e Added support for PWE Pseudo Wire Ethernet Control Word header e Added support for Ethernet 802 3 header e Now possible to only view selected streams in Stream Configuration Grid Bugfixes e Fixed stale port and stream entries in Global Stats view when loosing and regaining chassis connection e Improved BER Eye Diagram display of zero BER area e Allow refresh of BER Eye Diagram even if port is not reserved e Handle Delete key properly in segment tree view Xena2544 New features e Remember last directory for save and load configuration ticket 1266 Bugfixes e Wrong calculation of stream modifier limit ticket 1280 e Added retry for ARP requests ticket 1289 Xena2889 Bugfixes e Address Capacity Test would loop forever if a previously passed address count failed to pass again ticket 1280 www xenanetworks com SENA Xena Networks Release Note Release 58 1 Release Date April 1 2015 Software Firmware Versions XenaServer 405 XenaL47Server 1 4 XenaChassisUpgrader 1 4 XenaCon
32. ed in the start of the capture when capture was started while traffic was received at high RX rate www xenanetworks com XENA N ET W Xena Networks Release Note Release 62 Release Date August 31th 2015 Software Firmware Versions XenaServer 418 TestModule Firmware 262 XenaL47Server 1 23 XenaChassisUpgrader 1 8 XenaConnect 1 5 27 0 XenaManager 2G 1 19 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 4 7 Functionality XenaConnect Bug fixes e Support for long running test e Issues with test containing more than one port pair fixed e Improved chassis login failed case e Several Ul improvements XenaManager 2G Bug fixes e Fixed wrong formatting of PCAP NG for odd sized packets www xenanetworks com XENA NETWORKS Xena Networks Release Note Release 61 6 Release Date August 26th 2015 Software Firmware Versions XenaServer 418 TestModule Firmware 262 XenaL47Server 1 15 XenaChassisUpgrader 1 8 XenaConnect 1 4 9 0 XenaManager 2G 1 18 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New Features M1CFP4QSFP28CXP M1CFP100 M2CFP40 e Transceiver temperature can now be read out e TX Time Limit feature now available on 40G 100G ports M2QSFP e TX Time Limit feature now available on 40G ports Bugfixes General e Bug which
33. en chassis is disconnected Ports not added to removed from global stats grid when chassis connection state changed Prevent multiple script clients for each chassis Close chassis scriptclient window when loosing chassis connection Selecting filter for capture could fail if filter O did not exist ticket 1211 Improved check of saved window position and size to always ensure visibility when using multiple monitors Disabled editing of non supported fields for ext modifiers Fixed crash due to failure to handle localized font family resources ticket 1254 XM would hang and require Task Manager kill when editing certain grid properties and scrolling away Don t display internal control properties in port configuration grid Crash when displaying stats for 2 or more filter definitions ticket 1195 Prevent editing segment address fields when traffic is active Set all stream rate fields to inactive when port is in sequential mode ticket 1193 Grid view Use for all w increment did not check for valid property range ticket 1200 Xena2544 Bugfixes Fixed failure to reset iteration state for per source port throughput test ticket 1246 Fixed failure to handle toggle sync state for 10GBase T ports ticket 1234 Fixed failure to stop test on loss of port sync even if configured to do so ticket 1230 Changed default value for Stop on LOS to checked Fixed report generation problem for latency tests when rate sweep was
34. enanetworks com XENA N ET W a Xena3918 New features e Added support for setting port speeds to 10M 100M HDX mode Layer 4 7 Functionality New features e New script command P4_CAPABILITIES e Implemented floating licenses of ports and packet engines XenaScale Bugfixes e Disallow setting user defined payload to zero length e Report correct transceivername when cables are unplugged XenaConnect New features e License handling Port and Packet Engines Bugfixes e Network and subnet validation www xenanetworks com XEN NETWORKS Xena Networks Release Note Release 59 Release Date May 04 2015 Software Firmware Versions XenaServer 406 XenaL47Server 1 7 XenaChassisUpgrader 1 5 XenaConnect 1 2 9 0 XenaManager 2G 1 10 Xenalntegrator 1 14 Xena2544 2 24 Xena1564 1 14 Xena2889 1 12 Xena3918 1 12 XenaScriptClient 21 Layer 4 7 Functionality New features e Support for bursty traffic square wave modulation e Added fast MTU path discovery Bugfixes e Fixed a subtle bug in HTTP get request response where server could miss the first client payload e improved scheduling when transmitting while ramping up tcp connections XenaConnect New features e Realtime statistics charting e Bursty traffic configuration Bugfixes e Loadprofile persistence compiled profiles removed e Port speed selection not working correctly in special cases e Http app not reset when restarting test e Navigat
35. ence of command line options parsing ticket 1105 e Command line executor did not generate intermedia results ticket 1187 e Command line executor did not release used ports after test ended ticket 1187 Xena3918 New features e Added improved folder browser dialog Bugfixes e Improved resilience of command line options parsing ticket 1105 e Command line executor did not release used ports after test ended ticket 1187 www xenanetworks com Xenalntegrator No changes www xenanetworks com WENA Xena Networks Release Note Release number Release 57 2 Release date January 21 2015 Versions XenaServer S 401 Module 1 251 XenaChassisUpgrader v1 1 XenaManager 2G v1 6 Xenalntegrator v1 14 Xena2544 v2 17 Xena1564 v1 13 Xena2889 v1 9 Xena3918 v1 10 XenaScriptClient v21 XenaManager v362 Special remarks The old Setup program has been replaced with a new Windows Installer MSI compliant Setup program which also features a proper uninstaller The new Setup program will automatically remove all existing tools installed with the old Setup program The chassis upgrade functionality has been moved to another new tool the XenaChassisUpgrader The old XenaManager application is now end of life and will not be maintained anymore It is still shipped as part of the release but will be removed completely in the future Most of the new features in this release are not supported by the old XenaManager All
36. ettings FLOMHDX F100MHDX F10M100M and F100M1G ticket 1462 Prevent crash caused by not connected chassis Fixed annoying value updates in Port Rate Cap Value while editing ticket 1471 Fixed handling of ARP errors for Public IP ports www xenanetworks com XEN NETWORKS Xena Networks Release Note Release 62 3 Release Date Software Firmware Versions September 17th 2015 XenaServer TestModule Firmware M2SFPP4SFP Others XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient Layer 2 3 Test Module Functionality Bugfixes M1CFP4QSFP28CXP e Some QSFP28 DAC cables were detected as QSFP28 AOC C1 M2SFP 4SFP 420 263 262 1 23 1 8 1 5 27 0 1 19 1 14 2 28 1 16 1 14 1 14 21 e In some scenarios FCS errors would occur on the 10M 100M 1000M interfaces www xenanetworks com XENA N m AJ W Xena Networks Release Note Release 62 2 Release Date September 15th 2015 Software Firmware Versions XenaServer TestModule Firmware XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient Layer 2 3 Test Module Functionality Bugfixes M1CFP4QSFP28CXP 419 262 1 23 1 8 1 5 27 0 1 19 1 14 2 28 1 16 1 14 1 14 21 e Fixed bug on the PHY gt Host chip interface which could cause b
37. etworks Release Note Release 61 Release Date July 3 2015 Software Firmware Versions XenaServer TestModule Firmware M6RJ45 M2RJ45 All others XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient XenaChassisUpgrader Bugfixes e Only upload each image file type once to the chassis Layer 4 7 Functionality New features e New behavior for reset and reservation of ports e Added support for long request response payloads e Added repeated request response XenaConnect New features 411 257 256 1 14 1 7 1 4 9 0 1 13 1 14 2 27 1 16 1 14 1 14 21 e Introduced Test case as container for multiple Scenarios that each independently can be associated with ports and subnets The new Test case view replaces the old Test bench view e Support for repeated request response transactions e Optimized Test case elaboration quicker configuration of tests with multiple Scenarios e Rearrange counter hierarchy to support testing with multiple port pairs e Rearrange report layout to support testing with multiple port pairs www xenanetworks com WENA N T Xena Networks Release Note Release 60 4 Release Date June 17 2015 Software Firmware Versions XenaServer 411 TestModule Firmware M6RJ45 M2RJ45 257 All others 256 XenaL47Server 1 9 XenaChassisUpgrader 1 6 XenaConnect 1 3 8
38. ework the full framework not just the Client profile Moved Xena application data to user Documents directory to enable write access for non admin users Changed report date format to YYYY MM DD instead of DD MM YYYY Bug fix Fixed failure to get non existent port from port map Bug fix Report would show wrong duration if actual duration was larger than 30 minutes Release 53 released on July 26 2013 Versions XenaServer S 344 XenaDriver D 30 Module 1 237 1 236 for M2CFP40 M1CFP100 XenaManager M 343 Xenalntegrator v8 Xena2544 v20 www xenanetworks com SENA Xena1564 v9 Xena3918 v1 beta release Excel2544 v74 Excel2889 v17 Test Module functionality New Port Property support for IPv6 addresses with NDP support New Port property user configurable transmit period and display of time elapsed since Tx start New Port property Selectable 128B or 256B header sizes 256B reduces number of streams to half New Module property Latency timing reference can be set to Local Module Clock New Stream Payload type random payload M2SFPT M2SFP T new SMA out format 125 MHz reference clock M1CFP100 and M2CFP40 support for generating UDP headers with UDP checksum field inserted Added script command P_XMITONETIME Bug fix service defect monitoring showing false results for 1G ports being in tx 2 rx loop mode Bug fix potential packet loss on 10 Gbps ports for Rx2Tx loop mode for certain traffic loads Bug
39. faster Hot button for launching WireShark UDP checksum calculation on 10 40 and 100G ports not 1G ports Histogram saved CSV now includes x values IGMPv2 multicast join leave preliminary Injected Payload integrity errors now modify Payload instead of payload CRC value RFC2889 alpha Bug Fixes Incoming Pause frames could be dropped on 10 100M ports An incoming Pause frame with quantity 0 would not reset overwrite previous received Pause quantities 1 and 10G ports Fixed leaking of script socket handles RFC2544 v53 Added optional Packet Header Field Modifiers for Src IP Dest IP Src UDP and Dest UDP field values Redefined Store and Forward latency measurements from First 2 Last to Last 2 First Added support for testing with minimum size packets 64B and long packet headers UDP for the Throughput Loss and Back 2 Back test not the latency test Scaled from max 24 ports to max 72 ports when using the Optional IP addreses instead of default port IP addresses the corresponding Optional Dest MAC was not used the port s default gateway MAC address was still used Mesh testing did not work when using UDP header and 64 65B packets Fixed bug in ETH VL IP header template causing the VID value to be multiple with 16 www xenanetworks com XENA NETWOR Release 35 released on November 4 2011 Bug Fixes e When reaction to incoming Pause Flow Control is enabled port property some
40. fixes M1CFP4QSFP28CXP M1CFP100 M2CFP40 M2QSFP28 e TX packet engine sometimes copied the UDP checksum from the previous packet This bug still persists in 1G and 10G modules and will be fixed in the next release e TX packet engine caused misordered lost frames at the output for certain traffic patterns e Highly misordered traffic would cause the payload checksum to become N A and cause packet loss to be reported at the RX side even though no packets were actually lost XenaManager 2G New features e Added right click Use All Ports On Module option to modules e Added right click Use Un use Ports option to port www xenanetworks com XENA NETWORKS e Optimized collection speed for PHY eye diagram e Now posible to display raw bytes for undefined header data ticket 1367 e Added keyboard navigation for Capture Packets view e Added display of layer 1 bitrate to statistics panels e Statistics grid column widths are now persisted for next session Bugfixes e Prevent crash when adding new chart type ticket 1402 e Fixed crash when selecting Stream or Port Configuration Grid e Fixed wrong offset for TCP checksum field e Fixed default value for TCP Data Offset default is now minimum valid value of 5 Xena2544 New features e Added Port Latency Offset to port configuration grid Bugfixes e Wrong barchart for actual throughput at 100 loss ticket 1384 www xenanetworks com XENA NETWORKS Xena N
41. g fix ANEG did not work while in tx2rx loopmode M6SFP XenaManager ARP all function across all IP IPv6 streams of a port Replay of pcap files with big endian encoding Connect to chassis using DNS domain name Copy paste raw hex bytes in stream definitions Port level error count and testbed level error count in Global Control Bug fix do not allow auto neg disable when in auto mode Bug fix show jitter statistics even if source port is non local Bug fix fix enforcement of maximum number of packets in sequential TX mode Xena2544 2G Beta Release Compared to the original Xena2544 application the Xena2544 2G has been improved with the following features Ability to specify separate protocol headers for each port It is thus now possible to specify for instance a different VLAN for each port Ability to set modifiers on virtually any protocol field in the protocol headers using a Wireshark like tree view Support for asymmetric port rates and DUT throughput rates The Throughput test can be configured to either measure the least common throughput rate or measure a per port rate Ability to create a CSV formatted report in addition to the existing PDF and XML reports Xena2544 Added display of packet loss per port Added option to specify the latency offset value for each port Bug fix Command line tool failed to use configured port speed when different from current port speed Bug fix Changed all instances of Bps
42. hassis e Fixed bug for Counter overflow runtime error for large port count testbeds www xenanetworks com XENA NETWORKS Release 37 released on January 20 2012 New Features e IGMPv2 continuous multicast join configurable repeat interval e New default field values for IPv6 packet headers Bug Fixes e Polarity of 100G CAUI and 40G XLAUI PCS layer lane skew insertion function swapped so that a positive Tx skew insertion is also measured as a positive skew on Rx side e Payload Error Injection function not working correctly on 10 100 1000M ports when the Payload Checksum was disabled e Scripting error for script command PS_HEADERPROTOCOL n when protocol list is empty e Improved stability when retrying a failed module image upgrade extremely rare RFC2544 e Included Min and Max latencies in the Latency test in addition to Average latency e Added Preference for selection between Last 2 Last or Last 2 First latency measurements RFC2899 e First beta release with Throughput Forwarding Address Caching Address Learning and Broadcast Latency tests www xenanetworks com BENA Release 36 released on November 29 2011 New Features Auto calibration removal of transceivers delays in latency measurements L3 RX 2 TX loopmode except 100 40G ports Capture triggering keep for packets errored with payload integrity errors Simultaneous start of traffic across port not perfect but much
43. he RX stream stats Lost Packets and Payload Errors could get stuck in N A XenaManager 2G New features M1CFP4QSFP28CXP e It is now possible to perform Layer1 error insertion while FEC is enabled www xenanetworks com WHAT S NEW XENA NETWORKS Xena Networks Release Note Release 60 1 Release Date June 4 2015 Software Firmware Versions XenaServer TestModule Firmware XenaL47Server XenaChassisUpgrader XenaConnect XenaManager 2G Xenalntegrator Xena2544 Xena1564 Xena2889 Xena3918 XenaScriptClient Layer 2 3 Test Module Functionality New features M1CFP4QSFP28CXP 408 256 1 9 1 6 1 3 8 0 1 12 1 14 2 25 1 14 1 13 1 13 21 e Added support for new PHY chip used for the GA version of the M1CFP4QSFP28CXP module e Added support for 100G Forward Error Correction FEC on CFP4 and QSFP28 interfaces 803 11b e Added automatic setting of the PHY TX equalization when QSFP28 ACC CR4 cables or QSFP28 SR4 transceivers are inserted will be replaced in a future release with Clause 72 Clause 73 autoneg for CR4 cables e PRBS 31 generation will be automatically deactivated when FEC mode is selected PRBS patterns are incompatible with FEC XenaManager 2G New features e Added option to control FEC mode on new 100G testmodules www xenanetworks com WENA Xena Networks Release Note Release 60 Release Date June 4 2015 Software Firmware Versions XenaSer
44. ich does not measure latency jitter e Added possibility to use non default TCP port to connect to the chassis using the standard IP Port notation ex 192 168 1 120 22612 Usefull when multiple chassis are sitting behind the same NAT Bug fixes e Removed rare instability for M2SFP T M2XFP b power on reset process www xenanetworks com XENA N ET W Release 47 released on October 24 2012 Versions XenaManager M 314 XenaServer S 316 XenaDriver D 30 Module 1 220 1 227 for M2XFP b M2SFP T RFC2544 v69 RFC2889 v9 Bug fixes for M2SFP T test module e When selecting module Tx Clk SMA input for a specific loop filter bandwidth the effective loop filter bandwidth was twice as high as the loop filter bandwidth selected loop bandwidth e The SMA output 2 048 Tx Clock reference option was not supported www xenanetworks com XENA N m AJ W Release 46 released on October 31 2012 Versions XenaManager M 314 XenaServer S 315 XenaDriver D 30 Module 1 220 1 227 for M2XFP b M2SFP T RFC2544 v69 RFC2889 v9 New features e Module Local Clock adjustment now with 1 1000 ppm resolution Bug fixes for M2SFP T test module e Non stable boot operation could cause Ethernet ports to enter non SYNC state e Module Tx Clk Filter for low bandwidth value could require a long convergence period before now clock settings were effectuated e Adjusted Tx Clk Filter for Tx Clk Source SMA Input for
45. ing stats for 2 or more filter definitions ticket 1195 Don t display internal control properties in port configuration grid Prevent editing segment address fields when traffic is active Set all stream rate fields to inactive when port is in sequential mode ticket 1193 Grid view Use for all w increment did not check for valid property range ticket 1200 Xena2544 Bugfixes Fixed report generation problem for latency tests when rate sweep was linked to throughput results ticket 1194 Removed latency test options Autoset Start Rate and Autoset End Rate as they in some circumstances would lead to inconsistent rate sweep values The Relative to Throughput option should be used instead www xenanetworks com SENA Xena Networks Release Note Release Number Release 57 3 Release Date February 19 2015 Software Firmware Versions XenaServer 403 L2 3 TestModule Firmware 251 XenaChassisUpgrader 1 2 XenaManager 2G 1 7 Xenalntegrator 1 14 Xena2544 2 20 Xena1564 1 14 Xena2889 1 10 Xena3918 1 11 XenaScriptClient 21 Special remarks The old Setup program has been replaced with a new Windows Installer MSI compliant Setup program which also features a proper uninstaller The new Setup program will automatically remove all existing tools installed with the old Setup program The chassis upgrade functionality has been moved to another new tool the XenaChassisUpgrader The old XenaManager application i
46. ions XenaServer 404 XenaChassisUpgrader 1 2 XenaManager 2G 1 8 Xenalntegrator 1 14 Xena2544 2 21 Xena1564 1 14 Xena2889 1 10 Xena3918 1 11 XenaScriptClient 21 Special remarks The old Setup program has been replaced with a new Windows Installer MSI compliant Setup program which also features a proper uninstaller The new Setup program will automatically remove all existing tools installed with the old Setup program The chassis upgrade functionality has been moved to another new tool the XenaChassisUpgrader The old XenaManager application is now end of life and will not be maintained anymore It is still shipped as part of the release but will be removed completely in the future Most of the new features in this release are not supported by the old XenaManager All future maintenance focus is thus shifted to the new XenaManager 2G application Test Module Functionality M1CFP4QSFP28CXP e Improved generation speed for eye diagrams with up to a factor 14 e Improved initialization time for module resulting in a much faster chassis boot time XenaManager 2G New features e Added option to specify up to 8 multicast addresses for port Join Leave e Added new stream Seq Packets property for use when port is in sequential mode ticket 1193 www xenanetworks com WENA N T Bugfixes XM would hang and require Task Manager kill when editing certain grid properties and scrolling away ticket 1177 Crash when display
47. irect counter quires for reporting to be proxied by StatisticManager simplifies datatype rendering Tracked subscription objects usage correct disposal gt fix of mem leak TcpCC Realtime statview updated TcpLoad Realtime statview updated Reporting Added XenaResource section Added more Test Result detailed counters Added Test setup summary section Load Network and application specific setup parameter Added improved Test setup detailed section TableReportElement support for row mode building table by adding rows Test execution engine added support for canceling when chassis is being configured Capture mode pcap files Enables capture first 128 bytes Small many package mode or Full complete package lesser number of packages www xenanetworks com WENA NET Bugfixes 57 xscale 60 Stats name is truncated 63 Unnassign one port reassign another port gt unable to Run Test 72 remove chassis gt crash 65 Remove chassis after a successful test run gt crash 59 Retransmissions detected on 40G NIC but system performance reports ok green 67 Port assigned to test but no PE s allocated no warning given 58 Human readable version number in module parameters XenaL47Server New features Increased packet capture buffers 200 000 full size packets and added 4M packets truncated to 128 bytes Improved scheduling when using multiple Connection Groups Improved general scheduling algorithm Added M4
48. it errors to occur regardless of the line side link quality www xenanetworks com WENA N E Xena Networks Release Note Release 62 1 Release Date September 9th 2015 Software Firmware Versions XenaServer 418 5 TestModule Firmware 262 XenaL47Server 1 23 XenaChassisUpgrader 1 8 XenaConnect 1 5 27 0 XenaManager 2G 1 19 Xenalntegrator 1 14 Xena2544 2 28 Xena1564 1 16 Xena2889 1 14 Xena3918 1 14 XenaScriptClient 21 Layer 2 3 Test Module Functionality New Features and optimizations 100G 40G modules e Aggregated minimum RX laser power now reported under Port Properties P_STATUS e Individual 10G port RX power now reported under Port Properties when in 10G mode e Optimized transceiver stats readout RX laser power temperature etc for better scalability to many ports e Lower power consumption for M1CFP4QSFP28CXP in CXP mode Behavior changes M1CFP4QSFP28CXP e Passive QSFP28 cables CR4 and unknown transceiver types are no longer tuned automatically when inserted Press Retune PHY Now under Advanced PHY Features once physical link has been established to tune manually Bugfixes M1CFP4QSFP28CXP e Eye height measurement is now working again previously returned zero e Fixed bug which could cause 25G SerDes to get into a bad state where tuning and eye capture was not working properly 100G 40G modules e Fixed bug which could cause the captured packets to appear misorder
49. last to the report Bug fix Increased limit for iterations from 1 000 to 1 000 000 Bug fix Theoretical Max Throughput was missing in bar chart when iterations gt 1 Bug fix Results for Loss and B2B was missing in report for all rates except the last Bug fix Removed initial check for sync on ports which could cause problems if the port configuration was necessary for obtaining a sync Bug fix Individual port rate in percent in PDF report was always shown as 100 Bug fix Disable all streams after test has completed to allow setting port speed and IFG Xena1564 Added new application specific icon Added Explorer Xena Data Directory menu option to the File menu Added Create Support Archive menu options to the Help menu Don t crash if command line loaded config does not exist www xenanetworks com BENA Release 51 released on February 28 2013 Versions XenaServer S 326 XenaDriver D 30 Module 1 230 1 232 M1CFP100 M2CFP40 XenaManager M 331 Xenalntegrator v2 Xena2544 v12 Xena1564 v5 RFC2544 v74 RFC2889 v11 Test Module functionality Support for sub 1 packet per second scheduling rates for all packet sizes M1CFP100 and M2CFP40 support for port 2 port inline loop mode for 10 and 40 Gbps ports M1CFP100 and M2CFP40 support for Rx IFG histograms at port level M1CFP100 and M2CFP40 byte accurate measurement of IFG between captured packets XenaManager Add user friendly IPv6
50. ly write raw counter values to CSV file instead of formatted counter values ticket 830 Bug fix Port reservations may fail silently when parent resource is reserved ticket 788 Bug fix Adding modifier with custom mask causes fatal exception ticket 793 Bug fix Show N A for capture latency when latency value is invalid Bug fix Only show valid values for module M2QSFP CFP Configuration XenaManager No changes Xena2544 Added context menu for Use Value for All and Use for All W Increment commands to selected port grid Bug fix Failure to save entered public IP address ticket 870 Bug fix Ports was not sorted correctly in result panels and reports Xena1564 Added MAC learning step to avoid initial packet loss due to flodding Bug fix Not possible to set L2 rate larger than 2 147 483 647 bit sec due to wrong integer representation requred long integer ticket 783 Bug fix Burst tests might fail to initialize depending on previous tests due to failure to calculate remaining bandwidth ticket 783 Bug fix Pass Fail state of tests only depended on result for last used frame size Bug fix Wrong unit for Max Frame Transfer Delay in report ticket 768 Bug fix UAS state wrongly inherited by next frame size tested ticket 768 Bug fix Add detection of total loss of traffic for SES UAS criteria Bug fix Handle erroneous tab selection change when disabling docking panels Bug fix Performance test
51. ne rate for Synchronous Ethernet applications The Tx line rate complies with SONET SDH SyncE with respect to wander and jitter Selectable loop bandwidth for jitter attenuation 114 Hz 229 Hz 460 Hz 1864 Hz or 7834 Hz loop bandwidth 10 0 MHz or 2 048 MHz Tx line rate reference clock SMA input Drift wander is passed from SMA input to Tx line rate Selectable as either Tx Line Rate Reference 10 MHz 2 048 MHz or 156 25 MHz a trigger output indicating Ethernet start of frame or as a slave mode pass through SMA output SMA input www xenanetworks com BENA Release 41 released on July 30 2012 Versions XenaManager M 294 XenaServer S 300 XenaDriver D 30 Module 1 220 RFC2544 v69 RFC2889 v9 New features Jitter statistics according to MEF10 min ave max for up to 32 streams test payload ID 0 31 Jitter histograms Tx disable disable of optical laser or 10 100 1000M copper link port property Transmit line clock adjustment 1000 ppm for M6SFP M1CFP100 M2CFP40 Transceiver latency calibration for CFP optics Tcl scripting example library QualiSystems TestShell driver for Xena testers Maximum number of concurrent client connections increased from 10 to 24 per chassis XenaManager improvements Link to Wiki help URL Link to PDF version of Wiki help Excel2 544 Added Expanded Configured Maximum Rate feature to calculate maximum rates for Ethernet frames mapped into SONET SDH or
52. nect 1 1 15 0 XenaManager 2G 1 9 Xenalntegrator 1 14 Xena2544 2 23 Xena1564 1 14 Xena2889 1 11 Xena3918 1 12 XenaScriptClient 21 Release Highlights This release is mainly focused on supporting the new layer 4 7 test platform but also contains a number of improvements and bug fixes for the existing layer 2 3 test solutions XenaConnect is a Windows client for configuration and generation of stateful TCP on Xena s new layer 4 7 chassis With XenaConnect the user can specify millions of TCP connections in switched routed or NAT topologies XenaConnect also has extensive stats and reporting which can be exported directly to PDF Special remarks The old XenaManager tool is no longer part of the release It has been completely replaced with the new XenaManager 2G tool Layer 2 3 Test Module Functionality M1CFP4QSFP28CXP e QSFP28 port now supports QSFP as well 1x40G mode e Improved multi vendor CFP and CFP4 transceiver compatibility The TX de emphasis on the electrical interface from the transceiver towards the module PHY is now always set to zero on transceiver insertion Some vendors has it much higher per default and this may cause bit errors in the RX direction e Faster switch over time between media types CFP QSFP28 QSFP CXP and port speeds 100G 40G 10G e Lower power consumption for inactive interfaces e 20 faster eye capture e Bugfix QSFP28 did not properly detect some transceiver types e Bugfix On
53. nization between remote chassis for delay measurements in WAN Real time packet loss counter seq error redefined Payload checksum error analysis Statistics for number of errors injected on Tx side Larger counters for measuring inter packet gaps Capture packets with latency logging Display loss as in addition to number of packets Improved upgrade procedure automated SW installer CFP based 100 40G test modules P N M1CFP100 P N M2CFP40 6xSFP test module P N M6SFP CAUI XLAUI PCS and PRBS testing 40 100G only XenaMation browser based test automation XenaMation browser based RFC 2544 New 100 40G Features Test ports with 1OOGBASE SR10 LR4 Interface Test ports with 40GBASE SR4 LR4 Interface Test port tri speed capability 100 40 10G Port statistics Adjustable Minimum Inter Frame Gap IFG ARP PING 64 transmit streams per port Stream statistics Field modifiers www xenanetworks com XENA NETW e Packet length controls e Packet payload patterns e Error injection FCS e Packet headers Ethernet Ethernet II VLAN ARP IPv4 IPv6 UDP TCP LLC SNAP GTP ICMP RTP RTCP STP MPLS PBB custom e PCAP replay e Length and Latency Histograms e RFC 2544 test suite throughput loss latency back 2 back e Stream statistics Mbps pps e FCS and payload integrity checking e Packet loss calculation e Filters with statistics e Packet capture e Length and Latency histograms e Skew inse
54. o overrun issue with dynamic loss detection on 100G ports Bug fix reduced CFP MDIO interface speed to sub standard to support non compliant CFP tvcrs Bug fix fixed overrun issue with dynamic loss detection Bug fix included 8b 10b decoding error in Rx framing for 10 100 1000M interfaces Bug fix short 7B preamble for 10 100M copper electrical interfaces changed to 8B preamble aManager Single step replay of pcap files Bug fix Improved check when deleting filter that is used by capture Bug fix Removed assertion in global stats a2889 First release of RFC 2889 test suite a2544 Added option to log intermediate results to a CSV text file Upgraded to require Microsoft NET 3 5 Framework the full framework not just the Client profile Changed report date format to YYYY MM DD instead of DD MM YYYY Add support for specifying the unit of port speed limits Allow user to select the unit for data in Throughput charts Fps or Bps Show total throughput rate in report for both layer1 and layer 2 Bug fix Moved Xena application data to user Documents directory to enable write access for non admin users Bug fix Don t show auto negotiation on off option for ports that does not support it Bug fix Don t react to P_INTERFACE changes while in port reset stage Bug fix Fix averaging of multiple iterations for latency test www xenanetworks com SENA Bug fix Added detection of traffic stop before proceeding Bug fix B2B test initial bu
55. of 0 e Improved response time to incoming Pause flow control frames with quanta 0 e Setting packet sizes to random with a min to max range greater than 8192 could cause FCS errors www xenanetworks com XENA NETW Release 38 released on March 13 2012 New Features e IGMPv2 repeat join packet format enhanced with Router Alert IPv4 optional fields e Support for packet MTU of 9200 bytes for 40 100G test ports up from 2000 byte MTU Bug Fixes e ME6SFP test ports experience FCS errors on Rx test port 1 for large size packets depending on the line rate differences between DUT and Xena testers e Auto Negotiation on 10 100 1000M could sporadically be reported with a false port speed RFC2544 e Added color scheme support for Excel 2003 e Bug fix Could cause a runtime error when all rates failed in Throughput BacktoBack and Loss tests e Bugfix For false reporting of no chassis connectivity when using multiple test ports across multiple chassis e Bug fix When testing with minimum size packets 64B and long packet headers UDP statistics were not interpreted correctly e Bugfix Fixed counter overflow runtime error for large port count testbeds e Bug fix Runtime error when using mesh testing for a 2 port testbed e Bugfix Fixed round up down accuracies RFC2899 e Added Broadcast Forwarding testing e Fixed bug for false reporting of no chassis connectivity when using multiple test ports across multiple c
56. om Global Stats view Bug Fix failure to update capture view for User Stop option ticket 762 XenaManager No changes Xena2544 Added default Ethernet IPv6 protocol segment profile Bug fix Don t issue ARP for gateway MAC address when all destination ports are on same IP subnet ticket 720 Bug fix Fail latency and loss tests when Rx packets 0 ticket 754 Bug fix Corrected calculation of default gateway for IPv6 www xenanetworks com XENA NETW OR K S Xena1564 e No changes Xena2889 e Added default Ethernet IPv6 protocol segment profile e Bug fix Corrected calculation of default gateway for IPv6 e Bugfix Don t issue ARP for gateway MAC address when all destination ports are on same IP subnet e Bug fix Increased the wait time for traffic stop during address caching and learning tests Xena3918 e Enable viewing test parameters when test is running e Changed result and report to show test result PASS FAIL state e Join Leave test now fails the test properly in case of errors and logs the cause in the report instead of just aborting the test execution e Bugfix Fixed crash in reporting function when stopping active test e Bugfix Don t issue ARP for gateway MAC address when all destination ports are on same IP subnet Xenalntegrator e No changes Release 56 1 released on June 11 2014 Versions XenaServer S 386 Module 1 247 XenaManager 2G v1 1 Xenalntegrator v1 13 Xena
57. on crash when starting port polling with file logging disabled www xenanetworks com XENA NETW e Bugfix Changed command term for control buttons from Logging to Polling e Bugfix Fixed application freeze when trying to change chart color for stream e Bugfix Fixed bug in calculation of simple modifier byte offset e Bugfix Fixed inability to override IP address specified in protocol header Excel2 889 e Added settings to control how long the link is down when bouncing e Added settings to control how long the link must have been up after the disruption see above before resuming the iteration e Minor layout fixes in the TestCfg sheet e Bug fix Fixed error in the Forwarding Test report Release 52 released on April 15 2013 Versions XenaServer S 328 XenaDriver D 30 Module 1 230 1 232 M1CFP100 M2CFP40 XenaManager M 332 Xenalntegrator v3 Xena2544 v16 Xena1564 v6 RFC2544 v74 RFC2889 v11 XenalIntegrator e Introducing the Realtime Charting feature e Added support for multiple Port Logging Definitions e Added support for selecting XML logfile format e Added TID offset option to Advanced Stream Editor to allow prevention of TID clash with other active configurations e Added new application specific icon e Added Explorer Xena Data Directory menu option to the File menu e Added Create Support Archive menu options to the Help menu Xena2544 e Added new application specific icon e Ad
58. ory e Added support for Energy Efficient Ethernet EEE testports e Added feature to forcibly relinquish all resources on selected chassis The feature can be invoked in the Operations menu as Relinquish Chassis Resources e Bug fix Fixed crash when adding a modifier after several stream additions and removals ticket 884 www xenanetworks com SENA Bug fix Swapped position of Add Stream and Start Traffic context menu items to avoid starting traffic by mistake when wanting to add another stream ticket 877 Bug fix Prevent crash when MAC address editor field in grid view becomes temporarily invisible ticket 878 Bug fix Fixed erroneous update of capture results when selecting ports for the first time Bug fix Prevent selection of invalid step values for latency type histograms ticket 861 Bug fix Ensure that the max packet size cannot be lower than the min packet size for size types that use both values ticket 863 Bug fix Port TX sequential mode rate values not enabled when XM 2G re opened ticket 829 Bug fix XM 2G should ignore stream rates and not attempt to cap them when port is in sequential mode ticket 792 Bug fix Fixed ambiguous thousand separator for M2SFPT TX and SMA filter setting ticket 771 Bug fix Fixed crash when clicking in columns other than Name for a stream ticket 790 Bug fix Double click on Add Segment dialog scrollbar would close the dialog box ticket 787 Bug fix On
59. other custom format TestCfg Added new Pass Criteria feature TestCfg to mark measured throughputs below a certain thresshold in red Charts Configured Maximum Rate can optionally be listed as Customer Service Bandwidth in the Reports and Charts option under Preferences Fixed background color on optional IP and MAC information on the TestPairs sheets Support for 64 bit versions of Excel Formulas and charts no longer links to the original RFC sheet when saving results to a new sheet using the Save Results button on the Connect sheet New Preference field added Account for the 100ppm Ethernet clock uncertainty when determining if the goal set in Passed Rate is achieved Configured maximum rate now works correctly with Back to Back test Added Jitter MEF 10 compliant testing for port 2 port test pairs New Layer 3 Learning feature for IPv4 using Gratuitous ARPs to update the gateway s ARP table Makes it possible for a port to emulate 1 253 IP addresses without the need for ARP requests from the gateway Ethertype in MAC L2 learning packets changed from 0000 to FFFF for better DUT www xenanetworks com XENA NETW compatibility Bug fix Back to Back test running with zero rate in some configurations Bug fixes Latency measurements for packet sizes gt 16237 bytes on 10 100 1000M ports Payload Error statistics shows N A when stream not configured for Payload Error measurements Saturation of Servi
60. p to min max to avoid confusion when decrementing ticket 1061 Remove orphaned modifiers on stream after PCAP segment import ticket 1064 The bits of the mask of extended modifiers must be asserted from right LSB to left MSB Xena2544 New Features Migrated to use Microsoft NET 4 0 Added support for sync port traffic start and start time staggering Added support for enabling micro TPLD for streams Added support for setting MDI MDIX for supported ports Added support for multistream configuration Added context menu for use value for all to selected port grid Added command line option to log console messages to file ticket 928 Added option to enable or disable auto scrolling to last row Added option to prevent use of gateway MAC address as DMAC Added option to add custom port rate cap values ticket 1022 Bugfixes Not possible to remove chassis from configuration ticket 914 Inconsistent configuration handling when last used configuration file could not be found Intermediate result did not include same columns as realtime gridview in GUI ticket 924 Console mode did not emit completed message on chassis connection errors ticket 928 Console mode did not generate CSV report ticket 928 Auto scroll to last row would jump to first column ticket 960 Invalid tag names for segment profile map in XML report ticket 1027 Back to back test on 100G ports with 64 byte frames would exceed internal packet ma
61. r The size of the statistics panels now track the size of the main application window Filter traffic statistics for filters O and 1 Show own reserved ports using boldface type For streams only show RX chassis name when different from TX chassis Show description for each port Other For latency mode terminology is inverted so that in and out are seen from DUT s perspective The default MAC address for each test port now uses a unique Xena prefix of 04 F4 BC For 1 click Wireshark invocation the temporary pcap file is stored in the windows users application data folder For capture the per packet latency now takes account of the latency offset Defaut packet Ethertype is now OxFFFF instead of 0x0000 which is actually invalid RFC2544 The default MAC address for each test port now uses a unique Xena prefix of 04 F4 BC Default Ethernet Type changed from 0x0000 to OxFFFF for Ethernet only packet headers Added preferences for specifying the rate margin which is subtracted from Throughput rates used in Latency testing www xenanetworks com XENA N ET W RFC2899 e The default MAC address for each test port now uses a unique Xena prefix of 04 F4 BC e Default Ethernet Type changed from 0x0000 to OxFFFF for Ethernet only packet headers Bug fixes e Incorrect ARP requests were generated when Payload Checksum mechanism is enabled e 100 40G CAUI XLAUI Rx lane skew could rollover to 2048 instead
62. rare occations eye capture on empty an transceiver cage could crash the server www xenanetworks com SENA M2QSFP Bugfix RX laser power read out now works on both ports M1CFP100 M2CFP40 M1CFP4QSFP28CXP Bugfix Extended modifiers would sometimes still run after they were deleted XenaConnect New features Read only mode for editable test configuration across platform when test is compiling running and reported Links to Getting Started User Manual added to application startup screen Checks for internet connectivity during application start up If no connectivity the page links are grayed out Chassis connectivity robustness Immediately kill of chassis when connection is lost Assigned resources are removed gracefully from test if chassis or port reservation are changed during test Save Don t Save Cancel flow improved at application exit or when loading new test UI 3 rd party components updated to 2015 Q1 Bug work a rounds with previous version removed Changed controls re layout Removed old references themes etc Improved logging Introduce complex load profiles at application level Complex load editor with updating small chart Single data query counters collate data across multiple cgs Dataset queries counters resamples collated data into single dataset Moved all apps to complex load profile scheme Update Traffic mixer to handle two level load hierarchy Moved all d
63. reporting of packet loss on M1CFP100 M2CFP40 test ports Bug fix removing and re inserting a new CFP module would stop traffic when the new CFP transceiver type is identical to the previous used CFP transceiver type Bug fix reversed QSFP port numbering on M2QSFP module Bug fix corrected SFP type name reporting for 100FX transceivers Bug fix solved long term stability issues for XFP OTN scripting Bug fix removed option for selecting stream Suppressed state for 40 100G ports Bug fix removed option for enabling React to pause frames for 40 100G ports Bug fix removed option for selecting Rx to TX and Port to Port loopback modes for 40 100G ports XenaManager 2G First release of the second generation XenaManager application XenaManager Added support for TCP packet header protocol format with hardware generated checksum Added more sensible default values for TCP segment header Added support for G 8113 1 OAM packet header protocol format Added option for making port reservation using right click in port tree window Added support for GRE packet header protocol format RFC 2784 both with and without checksum Fixed MPLS TP OAM LCK OpCode definition Bug fix Fixed definition of TCP segment header Flags field is 9 bit not 8 bit Bug fix removed option for selecting stream Suppressed state for 40 100G ports Bug fix removed option for enabling React to pause frames for 40 100G ports Bug fix remo
64. rks com BENA e Added option to specify if test should be aborted on lost port sync e Added improved folder browser dialog e Added rate iteration line to console output Bugfixes e CSV report generation failed when stream info was included in report ticket 1116 e Crash when pressing the Restore Default Profiles button ticket 1124 e Old test configuration settings still displayed after loading new configuration file ticket 1145 e B2B test did not respect custom port cap value ticket 1022 e The MAC Learning Frame Count configuration parameter was not used e Abort test on lost port reservation e Improved resilience of command line options parsing ticket 1105 e Fixed crash when importing legacy Xena2544 configuration e Improved resilience towards partially corrupted stream profile assignments due to bugs in earlier Xena2544 versions ticket 1022 e Old test configuration settings still displayed after loading new configuration file ticket 1145 e Removed wrong initial rate percent in console output ticket 1187 e Command line executor did not generate intermedia results ticket 1187 e Command line executor did not release used ports after test ended ticket 1187 Xena1564 New features e Added improved folder browser dialog Bugfixes e Command line executor did not release used ports after test ended ticket 1187 Xena2889 New features e Added improved folder browser dialog Bugfixes e Improved resili
65. rst calculation was wrong when using software controlled per port speed limit Bug fix Update TestPassed field when averaging a result from a series of iterations Bug fix Fixed problems formatting invalid total latency values in report Bug fix Fixed program hang problem following loss of connection to chassis Bug fix Fixed Tx Rx packet counter overflow in report Bug fix Prevent iteration from looping endlessly Bug fix Report would show wrong duration if actual duration was larger than 30 minutes Xena1564 Upgraded to require Microsoft NET 3 5 Framework the full framework not just the Client profile Changed report date format to YYYY MM DD instead of DD MM YYYY Bug fix Don t react to P_INTERFACE changes while in port reset stage Bug fix Moved Xena application data to user Documents directory to enable write access for non admin users Bug fix Don t show auto negotiation on off option for ports that does not support it Bug fix Report would show wrong duration if actual duration was larger than 30 minutes Xena3918 Upgraded to require Microsoft NET 3 5 Framework the full framework not just the Client profile Changed report date format to YYYY MM DD instead of DD MM YYYY Bug fix Don t show auto negotiation on off option for ports that does not support it Bug fix Report would show wrong duration if actual duration was larger than 30 minutes Xenalntegrator Upgraded to require Microsoft NET 3 5 Fram
66. rt config file The link is now only disrupted when the FEC setting is changed from the previous value e g FEC_MODE ON to FEC_MODE OFF When the user changed the FEC enable setting on a port the chassis TCP connection other clients could be dropped XenaManager 2G New features Added support for direct hardware transceiver register access Added option to control statistics logging start stop from Global Stats ticket 1443 Added option to select source for port configuration grid Added paging to port and stream configuration grids Bugfixes Fixed crash when loading a port configuration saved from another port with an IP segment ticket 1510 Fixed use unuse bug for right click on selected ports Xena2544 New features Added support for setting FEC mode on 100G ports ticket 1538 Added support for setting delay after port reset Added support for setting delay after port sync toggle Improved ARP request handling resilience ticket 1471 Added support for running Xena2544 using command line options only under Linux Mono 4 0 3 Note that the Xena2544 configuration GUI is not supported under Linux Mono Added new Value Range concept to segment profiles Bugfixes Prevent never ending throughput test iteration for low packet rates Fixed sticky forced rate limit when changing from Pairs to other topology ticket 1487 Fixed usage of Public IP address ticket 1442 Fixed handling of port speed s
67. rtion per Tx virtual lane e User defined virtual lane to SerDes mapping e Relative virtual lane skew measurement e Sync header and PCS lane marker error counters e Indicators for loss of sync hdr and lane marker e BIP8 errors e Ability to adjust the parts per million ppm Tx frequency e PRBS testing per virtual lane e Optical power readout Bug Fixes e A flood of errored PING packet can cause a server crash during very special circumstances Support Information Please contact support xenanetworks com or your local Xena partner www xenanetworks com
68. rts entering streams rates are entered in unit Mbps resulted in a negative rate value www xenanetworks com XEN NETWORKS Release 31 released on September 5 2011 Bug Fixes e Latency measurements on 10G ports on test modules M2XFP M2SFP M6SFP are corrupted when located in a XenaBay chassis during certain chassis boot scenarios e When forcing a triple speed 10 100 1000Mbps port to 10 100Mbps speed stream rate entered in Mbps or Pps unit does not result in the correct stream rate rates entered in worked correctly e Packet loss counters per Rx stream does not work when the streams packet length distribution is random and the span of the min to max packet size range is a power of 2 www xenanetworks com BENA Release 30 released on September 1 2011 New Features Temperature status per test module excl 1G card Enable disable of auto neg on 1000M optical ports ARP PING with multiple MACs Tx LED symbol in GUI testbed explorer window Stream name displayed in stream configuration title panel Optical power readout from CFP modules Start stop suppress streams while traffic is ON IMIX length distribution PRBS payload patterns Five modifiers per stream on 10G ports Replay of PCAP files DiffServ PBB TE MPLS TP and MPLS templates FCoE IGMP packet templates Service Defect Monitoring for packet gaps Logging of events errors rx sync gaps etc NTP based timing synchro
69. s now end of life and will not be maintained anymore It is still shipped as part of the release but will be removed completely in the future Most of the new features in this release are not supported by the old XenaManager All future maintenance focus is thus shifted to the new XenaManager 2G application Test Module Functionality M1CFP4QSFP28CXP e Added automatic PHY RX tuning and recovery on the QSFP28 interface upon new signal detection from the QSFP28 transceiver e Added support for eye measurements for CFP4 and QSFP28 ports e Added support for tuning the PHY TX parameters on CFP4 and QSFP28 ports e Added user interface for controlling PHY RX tuning on CFP4 and QSFP28 ports e Added better support for identifying more types of QSFP28 transceivers e Fixed an issue where CXP SerDes would sometimes boot up in a bad state www xenanetworks com WENA N E Increased power efficiency on board PHYs and transceiver lasers are now turned off when not used Added laser power readout for QSFP28 QSFP transceivers M2QSFP Added laser power readout for QSFP transceivers XenaChassisUpgrader New features Check for missing modules after upgrade and reboot Added warning on expired software maintenance license Added option to set chassis username Added better logging of any issues when matching modules to firmware files Added Most Recently Used function for chassis address XenaManager 2G New features Added s
70. sis resources Added option to enable disable auto negotiation on copper 10 100 1000M ports Bug fixes Port level multicast join would stop when traffic generation was started Sequential scheduling did not work properly for 40 100G No default ICMP checksum inserted into packet Latency falsely reported as N A in XenaManager when using NTP between two chassis M1CFP100 stream suspend did not work after a Tx N packets command for certain N values M2SFP T When selecting clk O Rx clk as Tx clk source it would select clk 1 Rx Clk instead The input SMA connector now also support the selected loop bandwidth However loop bandwidth above 4000Hz cannot be supported by the SMA input ref clk The output SMA connector now also supports the selected loop bandwidth However loop bandwidths above 4000Hz cannot be supported by the SMA output Improved capability to recover from a missing Clk source such as during link sync error or fault on SMA input ref clk www xenanetworks com XEN NETWORKS Release 42 released on September 16 2012 Versions XenaManager M 295 XenaServer S 304 XenaDriver D 30 Module 1 220 1 224 for M2XFPB M2SFP T RFC2544 v69 RFC2889 v9 New features e Support for M2XFP b Transmit line clock adjustment 1000 ppm e Support for M2SFP T with advanced clocking features 1x line rate can be referenced to either local clock oscillator adjustable in steps of 1 ppm SMA input or from the Rx li
71. sometimes cause a single payload integrity error to be reported at the start of the traffic stream resolved 100G 40G modules e Bug introduced in 61 5 when capturing packets using capture triggers payload errors TID etc resolved XenaChassisUpgrader Bugfixes e When atest module of a given type was upgraded then upgrade of all other test modules of same type was skipped www xenanetworks com XENA N ET W XenaManager 2G New features Added DHCPv4 client option for testports Improved keyboard navigation in protocol segment tree move up down expand collapse insert delete segments and modifiers Made TX zero rate check period configurable Added option to have CAUI error counters cleared from Global Stats panel Use PCAP NG format when launching Wireshark from Port Capture panel Show error status of load port configuration job Added option to also save Ethernet FCS to PCAP files ticket 1479 Added display of port transceiver temperature Bugfixes Fixed crash when invoking Use For All in Stream Grid and resulting value was invalid for stream target ticket 1449 Fixed failure to handle Step gt 1 for IP Address modifiers ticket 1441 Fixed missing dynamic updates of reservation state and temperature in module property page www xenanetworks com XEN N E 1 A VV O R Xena Networks Release Note Release 61 5 Release Date Software Firmware Versions August 19th 2
72. ssis in disconnected mode until explicitly connected again Moved docking panel visibility options to separate dialog Added embedded ScriptClient for each chassis www xenanetworks com SENA Port and Stream Configuration Improved hex value editor allow selecting multiple byte values copy and paste Added support for enabling micro TPLD for streams Added support for sync port traffic start and start time staggering Port and stream config grids now show the number of rows Added support for setting MDI MDIX for supported ports Ability to Use For All w Increment for MAC addresses Provided modifier overview in Stream Properties view Added readonly display of resulting bitrate at layer 1 in stream properties Added underline indication of HW modified fields as for XM 1G ticket 786 Added option to load same port configuration file to multiple ports ticket 969 Added option to use stream description as label in resource treeview Added protocol segment definition for IGMPv1 Allow Use with increment for stream descriptions ticket 1026 Added option to select the source of streams in the grid configuration view ticket 1025 Now possible to add multiple streams in one operation Enable pasting stream on multiple ports Statistics Migrated periodic port statistics logging feature from Xenalntegrator Added view for aggregated stream statistics counters ticket 893 Customized column order in Global Statistics grid
73. sts e Pv6 header length field with incorrect value e Improved CAUI noise immunity for 100 40G CFP modules e UDP checksum error when used with IPv6 on 10G ports e False link sync status for 10G ports on 100 40G module when using optical MPO lt gt LC splitter cabling depending on optical transceiver type e Potential false logging of packet loss errors in the log function for 100 40G interfaces www xenanetworks com BENA Release 39 released on April 23 2012 Versions XenaManager M 272 XenaServer S 280 XenaDriver D 30 Module 1 214 RFC2544 v63 RFC2889 v5 New features Optional configuration of the packet offset from where the Payload Checksum is calculated The default is 14 bytes after Ethernet header which is backward compatible Saving a port configuration or a test case now includes service disruption type RX logging checkmarks and the global Stop at duration For the Mix packet length distribution the minimum size is now 78 bytes accommodating UDP XenaManager improvements XenaManager statistics Show jitter max min latency in RX statistics XenaManager capture The size of the Capture Results panel shrinks to fit the width of the packets XenaManager testbed Relinquish of all ports in testbed still prompting for each reserved port XenaManager windows Maximize button for pulled out panels XenaManager global statistics Adjust all column widths at once by dragging the left most divide
74. t filter removal if used by capture or histograms e Bug fix Check if port references in testbeds refer to unknown chassis and remove any such orphaned ports e Bug fix Improved performance of global stats stream grid e Bug fix Improved performance of port and stream configuraton grid e Bugfix Fixed handling of filter match term position and mask e Bug fix Disable React to PAUSE Frames property for 40 100G ports e Bug fix Also clear counters when starting traffic in Global Stats view e Bugfix Fixed stuck stats polling after chassis reconnect e Bug fix Only show valid loopback options for 40 100G ports e Bug fix Only display TX RX error counter when traffic is not running on TX port e Bug fix Fixed missing histogram chart update when other histogram selected bug XenaManager e Added support for configuring MIX weight distribution for packet lengths Xena2544 e Added support for configuring MIX weight distribution for packet lengths e Bugfix Failed to import Xena2544 v1 configuration file with topology PAIRS ticket 689 e Bugfix Fixed crash opening context menu when selecting both modules and ports Xena2889 e No changes www xenanetworks com WENA Xena3918 No changes Xenalntegrator No changes Release 56 released on May 26 2014 Versions XenaServer S 379 Module 1 247 XenaManager 2G v1 0 Xenalntegrator v1 13 Xena2544 v2 8 Xena1564 v1 10 Xena2889 v1 3 Xena39
75. tClient v21 XenaManager v362 Special remarks The old Setup program has been replaced with a new Windows Installer MSI compliant Setup program which also features a proper uninstaller The new Setup program will automatically remove all existing tools installed with the old Setup program The chassis upgrade functionality has been moved to another new tool the XenaChassisUpgrader Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator applications versioning methodology has been changed from a single X to a double revision numbering scheme X X The old XenaManager application is now end of life and will not be maintained anymore It is still shipped as part of the release but will be removed completely in the future Most of the new features in this release are not supported by XenaManager All future maintenance focus is thus shifted to the new XenaManager 2G application Xena2544 Xena1564 Xena2889 Xena3918 and Xenalntegrator now require the Microsoft NET 4 0 Framework Client Profile www xenanetworks com BENA Test Module Functionality New Features Added support for synchronized start of traffic for multiple ports Added support for staggered start of traffic across multiple ports Added support for Energy Efficient Ethernet EEE for 10G ports on M2RJ25 and M6RJ45 Timestamp expiry for captured packets increased to 512 seconds up from 32 seconds Added support for micro TPLD for small packet sizes
76. ugfix Fixed EIR and TP test validation for P to MP tests These tests could be failed incorrectly e Bugfix Fixed validation of latency values which could be invalidated by an invalid current value e Bug fix Fixed exception when CIR or EIR was set to a value larger than 2147483 e Bugfix Fixed port reservation problem if ports were reserved on configuration load and user initially declined to forcibly relinquish the ports e Bugfix Fixed EIR and TP test validation for P to MP tests These tests could be FAILED incorrectly e Bugfix Fixed polled incorrect loss calculation e Bug fix Fixed bug preventing looped port configuration e Bugfix Fixed crash when stopping a performance test e Bugfix Fixed erroneous incrementing display of polled loss rates e Bugfix Fixed missing update of service tree when UNI config changed e Bug fix Fixed missing mark of passed CIR stepload test step Xena3918 First release of RFC 3918 test suite beta version XenalIntegrator Added logging of FCS errors Note that this introduces a new header in the CSV file Existing CSV parsing code that depended on absolute column location may have to be updated Added option to set port auto negotiation mode and PAUSE mode Bug fix Fixed precision issue with logging large integer values to CSV file All integer values will now be logged with full precision Bug fix Fixed autozoom problem when larger values was scrolled out of view Bug fix Applicati
77. upport for eye diagrams for M1CFP4QSFP28CXP testmodules Added support for multiple charts Also made charting configuration persistent Added support for loop until manually stopped PCAP replay mode ticket 1069 Added support for using Port TX Time Limit in Global Statistics ticket 1077 Added support for changing the visual application theme Improved support for Energy Efficient Ethernet EEE testports Bugfixes Added missing port zero rate monitoring from the legacy XenaManager ticket 1022 Corrected spelling mistake for Local Clock Adjustment label ticket 1091 Fixed crash when copy pasting MAC addresses ticket 1107 Fixed wrong IP Type value for UDP and TCP field with checksum ticket 1123 TCP checksum was incorrectly shown as supported for M6SFP and M2SFPT modules Incorrect default value for Flags field in GRE with checksum segment ticket 1150 Limited checksum for GRE with checksum segment not calculated ticket 1150 Fixed inability to view configured TID for active histogram ticket 1176 Fixed crash when disconnecting from an unresponsive chassis ticket 1178 Fixed crash in trace message handling ticket 1164 Fixed crash when handling responses from disconnecting chassis ticket 1164 Fixed crash when adding modifiers ticket 1174 Enable support for local clock adjustment for M2SFP rev c modules Xena2544 New features Added FCS Errors total counter to progress display www xenanetwo
78. ved option for selecting Rx to TX and Port to Port loopback modes for 40 100G ports Xenalntegrator Bug fix Unable to edit protocol field values Bug fix Fixed excessive memory consumption during long term execution Bug fix Elapsed time display 1 hour too large for minutes gt 30 Xena2544 Added checkbox to Physical Ports tree for easier adding removing ports Added flow based learning preamble support Added Bit s and Fps counters to Latency Jitter test results Added Pass Threshold option to Throughput test Bug fix Prevent the user from selecting a non writable directory as the reporting directory www xenanetworks com WENA N E Bug fix Failed to correctly calculate average latency and jitter for mesh configurations with port count gt 2 Bug fix Burst size calculation did not take different port speeds between pairs into account Bug fix Activate flow based learning preamble for each trial Bug fix Fixed crash when starting a test with the Results Panel closed Added missing log of intermediate results Xena2544 The older Xena2544 application is now end of life and all future feature upgrades are based on the new Xena2544 2G application which is now generally referred to as Xena2544 Xena2889 Bug fix Fixed excessive memory usage for storing counter samples Bug fix Fixed MAC learning for value iterations with long durations Bug fix Fixed display of current duration in status line Bug
79. ver 407 TestModule Firmware 256 XenaL47Server 1 10 XenaChassisUpgrader 1 6 XenaConnect 1 3 8 0 XenaManager 2G 1 11 Xenalntegrator 1 14 Xena2544 2 25 Xena1564 1 14 Xena2889 1 13 Xena3918 1 13 XenaScriptClient 21 Layer 2 3 Test Module Functionality New features General features Detailed ARP IP address tables can now be defined per port VXLAN PoC only for fixed packet length Added support for Pseudo Wire Ethernet Control Word segment definition Added support for Ethernet 802 3 header Ethernet header with length field M1CFP4QSFP28CXP QSFP28 optical transceivers can now be used in 40G mode as well This is achieved by automatically disabling the Clock Data Recovery CDR of QSFP28 transceivers when the port is in 40G mode Improved energy efficiency General 40G 100G features TX power read out Link level flow control Layer 1 physical RX to TX loop mode 40G port to port loop mode Suppress re enable stream while traffic is running Bugfixes Improved rate accuracy for stream rates on 40G 100G ports QSFP28 SR4 transceivers are now identified correctly M6RJ45 M2RJ45 could not handle packets gt 13500B Now sizes up to 16380B are supported Minimum packet size for 40G 100G could be set to 56B which is too low Fixed to reject values smaller than 60B www xenanetworks com BENA NET e Improved automatic latency measurement calibration for CXP transceivers e Retrieving the latency of a captured
80. views will be restored when application is started again ticket 921 Added support for new 1 second min and max latency jitter statistics Bugfixes Unable to change chassis name description and password Stream creation attempt not prevented if max streams reached for port Crash when loading port configuration with IPv6 segment ticket 903 Not all stream counters written to saved CSV file in Global view Auto remove port from testbed which is no longer present in chassis ticket 903 Changing the packet size in resource view did not change the rates ticket 920 Failed to check for max stream packet size ticket 968 Failed to check limits on various modifier values ticket 963 Global Stats running time counter would wrap from 23 59 59 to 00 00 00 ticket 948 Improved scrolling speed of configuration grids Modifier not displayed for raw segment ticket 1004 Improved performance for large stream counts Fixed crash when copy pasting a stream with modifiers ticket 996 Fixed missing modifiers when copy pasting a stream ticket 1024 Not possible to edit extended modifier values after creation Multiple entries in Global Stats after changing CFP module type or media Unable to display Extended Modifier in stream protocol tree www xenanetworks com SENA Auto refresh port configuration when reserving it Crash when double clicking on a column in Available Resources ticket 1048 Renamed modifier start sto

WHAT`S NEW - Xena Networks

Contents

Download Pdf Manuals

Related Search

Related Contents