Chennic Smart Charger for LiFePO4 Battery (JCKF7210)
Contents
1. Operating Temperature 57 2 F 113 F 10 45 c Storage Temperature 40 F 158 F 40 70 c AC Input Customized 1 5 meter cable Pre Cr rr a FO Na ea a ioe TY ES a DC Output customized 1 5 meter cable v Charging mode CC constant current stage 10A CV constant voltage Stage 80 3V 10A Cut off 80 3V 0 5A Regulatory Safety Standard CE Listed UL compliant DURET Bey SUEGA Safety Europe EN60335 2 29 2002 Packing List Charger 1 User Manual 1 DC Power cord 1 AC Power cord 1 Time2. Chennic Smart Charger for LiFePO4 Battery JCKF7210 Please read this manual carefully before use the charger For more information please contact Chennic Technology Co Ltd Add NO 18 Huishui Road Huishui Economic Development Area Licang District Qingdao Shandong Province 266000 China Tel 86 532 80931534 Fax 86 532 83773076 Email For technique issues please contact us at info chennic com For inquiries please contact us at sales chennic com Website www chennic com es oe K 6 B l Features Short circuit protection Charger O P cut off automatically when short circuit Overload Protection Charger O P current limited automatically when overload Reverse Polarity Protection Charger O P cut off automatically when batteries reverse connection Automatic multi rate charging function CC CV Cut off Parallel operation available Parallel with battery as Dc power supply operation available 2 LED Display LED1 Red power on LED2 Red charging Green full Operations Check if your local mains supply conforms to charger s input voltage 110V or 220V Then connect the charger system to a wall socket strongly Warning do not connect to a wrong input voltage or charger will be broken 2 LED1 RED confirms AC power on and LED2 GREEN confirms charger connects well Note If the charger has a Power Switch at AC side please turn on if firstly 3 Connect the plug or DC output cord to battery te
3. rminals LED2 light turns to RED and if goes to GREEN it confirms battery fully charged N gt positive L gt Negative Brown gt ve terminal Blue gt ve terminal Note If this charger with a Relay for Reverse Polarity Protection it doesn t have output voltage and current when charger power on but disconnecting with the battery It will have voltage and current output when it connects with battery If the chargers don t have a Relay for Reverse Polarity Protection it has output once the power on C l Notices Charger will turn off automatically if it was not connected to battery for 1 3 minutes after power on please start it again This charger is designed for charging lithium battery Lead acid battery is available after adjustment The battery maybe damaged if LED2 cannot be changed to green after long time charging Always place the charger in well ventilated and dry environments The charger is designed by aluminum housing as itself heat sink don t cover it avoiding over temperature on the case when charging Charger should be power on for 2 hours once a month Smart Charger for LiFePO4 Batteries Specification Model JCKF7210 DC Output DC Output voltage maximum 80 3v DC Output Current maximum 10A AC input AC Input voltage range 90 132VAC or 200 264VAC AC Input voltage nominal 11OVAC or 220VAC AC Input Frequency 50 60HZ Mechanical Dimensions 135 230 70mm Net Weight 3 0KG
Download Pdf Manuals
Related Search