User Guide - Performance Audio
Contents
1. 41 4 Splitter for DisplayPort EXT DP 144 User Manual w gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support gefen com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice 1 4 Splitter for DisplayPort is a trademark of Gefen LLC 2012 Gefen LLC All rights reserved All trademarks are the property of their respective owners Rev Ad CONTENTS Introduction Operation Notes Features Front Panel Layout Front Panel Descriptions Back Panel Layout Back Panel Descriptions Connecting the 1 4 Splitter for DisplayPort o oo N O Q N Wiring Diagram de EDID Management 11 Specifications 12 Warranty INTRODUCTION Congratulations on your purchase of the 1 4 Splitter for DisplayPort Your complete satisfaction is very important to us Gefen Gefen delivers innovative and progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all size2. for DisplayPort 1 Connect the included DisplayPort cable between the DisplayPort source and the DP In connector on the Splitter 2 Connect up to four 4 DisplayPort displays to each of the DP Out connectors on the Splitter 3 Connect the included 5V 3A DC power supply to the power receptacle on the 1 4 Splitter for DisplayPort then connect the AC power cord to an available electrical outlet Wiring Diagram for the 1 4 Splitter for DisplayPort ED DISPLAYPORT CABLE INNER Computer DisplayPort Splitter DisplayPort Display EXT DP 144 EDID MANAGEMENT EDID Management The 1 4 Splitter for DisplayPort has an EDID switch which can be used to select between the Internal EDID and an the External EDID Internal EDID Mode When the 1 4 Splitter for DisplayPort is set to Internal EDID Mode the EDID is read from the on board internal memory of the Splitter To use this mode slide the EDID button to the Int position This mode will use a preset EDID stored in the Gefen 1 4 Splitter for DisplayPort This pre programmed standard EDID data structure is compatible with most audio video devices All resolutions and audio formats specified in this EDID will be passed to the source device See the tables below for a complete listing of the resolutions and audio formats listed in this EDID IMPORTANT All other DisplayPort devices displays connected to the output ports must be compatible with at least one resolution audio
3. f sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 12 Rev Ad 44 x MA DP 1 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com Os 6 X cc cd o This product uses UL listed or CE compliant power supplies
4. format specified in this EDID It is recommended to set on the source device a common resolution and audio format shared by all attached devices displays This is to ensure a compatible signal is output to all connected devices displays Internal EDID Video Timings EDID MANAGEMENT External EDID Mode When the 1 4 Splitter for DisplayPort is set to External EDID Mode the source device reads the EDID Extended Display Identification Data from the output devices connected to the Splitter The EDID contains information about what type of audio video data that the source can send to each output To use this mode slide the EDID button to the Ext position The EDID of the display connected to Output 1 will be recorded and copied to all other DisplayPort outputs on the Splitter If a display is not detected on Output 1 then the Splitter will look for a display on Output 2 then Output 3 and so on until a valid EDID is found IMPORTANT All other DisplayPort devices displays connected to the output ports must be compatible with at least one resolution audio format specified in this EDID It is recommended to set on the source device acommon resolution and audio format shared by all attached devices displays This is to ensure a compatible signal is output to all connected devices displays 10 SPECIFICATIONS Maximum Pixel Glock aaa 300 MHz Maximum Data Ral l 10 6 Gbp
5. rts 1080p Full HD at 120Hz and dual link resolutions up to 2560 x 1600 WQXGA EDID Management for rapid integration of source and displays EDID Reset button Supports up to 7 1 channels of linear PCM audio 32 kHz 192 kHz sampling rate Supports DisplayPort version 1 1a Package Includes 1 1 1 1 1 4 Splitter for DisplayPort 6 ft DisplayPort cable 5V 3A DC power supply Quick Start Guide uu FRONT PANEL LAYOUT 9ueg luoJd FRONT PANEL DESCRIPTIONS 1 Power This LED indicator will glow bright blue when the unit is powered BACK PANEL LAYOUT joueg yoeg BACK PANEL DESCRIPTIONS Out 1 Out 4 Connect up to four 4 DisplayPort displays to each of the DisplayPort output connectors In Connect a DisplayPort equipped computer source to the input connector 5VDC Connect the included 5V DC power supply to this receptacle Input Indicator This LED will glow bright blue when a DisplayPort source is connected to the input connector Output Indicators These LEDs will glow bright blue once a DisplayPort display is connected to an output connector Reset Press this button anytime the EDID is switched between Internal Int and External Ext or ifthe unit becomes unresponsive EDID Used to switch between Internal Int and External Ext EDID modes See pages 9 10 for details on EDID management CONNECTING THE 1 4 SPLITTER FOR DISPLAYPORT How to Connect the 1 4 Splitter
6. s Maximum Resolution ciere eren ntn dns 2560 x 1600 Video Input Connector u u uu uu nuusan sagu nennen 1 DisplayPort female Video Output Conmectors neiseina eti aio 4 DisplayPort female Power Supply rear 5V 3ADC Power Consumption et bee eee d ue rn 15W max Operating Temperature 0 C 40 C Dimensions WX HX D een 10 75 x 1 25 x 5 25 274mm x 32mm x 134mm Shipping Weight en ret ie inse RE diet tae tuas 3 Ibs 1 2 kg 11 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof o
7. s with hard working solutions that are easy to install and simple to operate The Gefen 1 4 Splitter for DisplayPort The Gefen 1 4 Splitter for DisplayPort allows a DisplayPort equipped computer to be connected to four DisplayPort displays Resolutions up to 2560 x 1600 are supported EDID management provides rapid integration of DisplayPort sources and displays Two or more of these splitters can be connected together to create larger video distribution networks How It Works Connect the DisplayPort computer to the input on the Splitter using the supplied cable Connect up to four DisplayPort displays to the 1 4 Splitter for DisplayPort OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 1 4 SPLITTER FOR DISPLAYPORT All other DisplayPort devices displays connected to the output ports must be compatible with at least one resolution audio format specified in this EDID It is recommended to set on the source device a common resolution and audio format shared by all attached devices displays This is to ensure a compatible signal is output to all connected devices displays HDCP content is supported NOTE Ifthe source and or display is not 100 DisplayPort compliant a protocol specific adapter will be required in order to connect the source to the Splitter and or the Splitter to a high resolution display FEATURES Features Simultaneously displays one DisplayPort source on up to four displays Suppo
Download Pdf Manuals
Related Search