- Vemer SpA
Contents
1. Clu 5 which all the set programmes shall not be and Tuesday Press G1 and C2 carried out and the relay shall be in the s ber nights of b id off position which program is set for reum 1 NIGHT PROGRAM C1 menu Note the display of the P3 program is divided into two screen shots the With this menu it is possible to view and first one showing the switch off time change the programs set on relay 1 and the second time the switch back on time 12 User manual memo AST2 from one screen to other press keys C1 and C2 Ud CC a C te ON P3 J 7 ho LUE 2 1 2 Change NIGHT C1 Should you wish to change the program assigned to a specific day of the week follow these steps foe teh Cun From the day display menu 12 gt Press Ok to enter into modification NH gt The display shows the currently set c2 6 program flashing press C1 and C2 to choose which program 1 P6 to set and confirm with Ok gt Enter the parameters relative to the selected program P1 no parameter P2 no parameter P3 night switch off time night switch on time P4 night switch off time P5 night switch on time P6 initial time of the impulse duration of impulse gt Press Ok2. nn RE The instrument makes it possible to automatically manage the CET DST LUZ change and vice vers The following parameters 7 must be entered NE Tus To activate deactivate the function for both changes NECI V gt select SETTINGS DST with 1 and C2 week of the change 1 gt confirm with Ok The current status 1ST first 2ND second will appear on the display 3RD third 4TH fourth CFForAUEC GN LAST last of the month dre gt press twice to access the month of the change LOK change mode day of the week gt select SET AUTO ON or SET AUTO OFF Monday Tuesday with C1 and 62 time the change gt press Ok to confirm Ok When all parameters are set press 4 to exit If the function is deactivated AUTO cy i RI OFF then the following message 18 User manual memo AST2 The default values for the time change are winter gt summer change last Sunday in March 2 00 am summer gt winter change last Sunday in October 3 00 am During normal operation the symbol will appear on the display during the CET period winter and the symbol XX will appear during the DST period summer POSITION menu This menu is used to change the geographical coordinates latitude longitude time zon
3. year gt month gt day EN ze User manual memo AST2 When the day is being entered the display will show a bar with the corresponding day of the week 1 gt Monday 7 Sunday Setting the time The parameter hours minutes being changed will flash gt Select the desired value with with C1 and C2 gt Press Ok to confirm and continue with the next parameter The insertion sequence is hours minutes 8 Setting the coordinates province capital By setting the geographical r coordinates the instrument is able to automatically H calculate the sunrise and sunset times for each day during the year The menu e changes depending on the LJ set language e if Italian is selected then only the province where the instrument is installed i mW ri LU Cant t Mit must be entered the display will show the province abbreviations followed by the full name possibly shortened to six characters gt Select the province with G1 and C2 gt Press Ok to confirm User manual memo AST2 e if a language other than Italian is page The display will show the date selected the following parameters time relay status day of the week in c Jom E
4. must be entered letters on the top row in numbers at the ci UC bottom and the CET DST symbol etm nr C2 Jatitude LL UE longitude Lt bu 0 Note if the instrument is not powered 4 d NLIF E H ok by the mains instead of the the time zone MN Le following message will appear on the top Main page M ee a time zone row SOF L is suggested L ri L on In this condition backlighting is not active based on the m T SANTE lt and the relay will remain off latitude and LINE longitude values eee this value maybe changed using the l H L L V C1 and C2 keys mr sunrise and i time corrections in this phase not enter a correction leave the two values at 0 and press Ok At this point the instrument will switch to the normal operating status main 519 User manual AST2 MANUAL OPERATION PRE SET PROGRAMS Switching on off manually Memo AST2 is equipped with 6 pre set programs that allow you to program the instrument s night behaviour Press the C1 G2 key briefly to switch the output relay 1 relay 2 P1 program The status that is reached will be main tained until the next program event This program sets 2 switch on suns
5. 7 25 User manual memo AST2 sjem Vemer S p A 32032 Feltre BL Via Camp Lonc 16 Tel 39 0439 80638 Fax 39 0439 80619 e mail info vemer it web site www vemer it SPA V3IS00545 030
6. the following message will appear on the display N dHEH Gut on the remote control display and the remote control will emit bips When completed the following message is displayed ERHNSMI EE UNE Note during transmission point the remote control towards the front of the instrument to facilitate the transmission A possible 24 User manual memo AST2 BATTERY REPLACEMENT The battery charge level can be checked automatically by the instrument once a week manually hold down the 41 key on the main page for 3 seconds If the battery charge level is lower than the specific threshold the following message will appear on the first row of the display In this case replace the battery as soon as possible To replace the battery disconnect the power supply remove the cover from the battery compartment turning it anticlockwise replace the battery and replace the cover turning it clockwise connect the power supply In order to retain the programming and settings the time that passes between removing the old battery and inserting the new one must not exceed 60 seconds Use CR 2032 batteries only Throw away the run down batteries in compliance with current regulations on the disposal of harmful waste REFERENCE STANDARDS Compliance with Community Directives 2006 95 EC low voltage 2004 108 E M C is declared in reference to the harmonized standard EN 60730 2
7. to confirm The display will show the words SH Ed i and the instrument shall enter normal operation nee User manual memo AST2 C 2 Menu HOLIDAY PROGRAM Note the first and last date are Cu to be considered included in the SL 2 1 Creating a HOLIDAY program A holiday period gt Press Ok to confirm C1 From the normal operating status Once the programming is confirmed A pH b ric LUI gt Press e the following message will appear x on the display SHY Ed m gt Select PROGRAM with G1 and C2 During normal operation the possible gt and confirm with Ok execution of a holiday programme is signalled by the symbol field 7 on EN gt Select PROGRAM HOLIDAY with 1 1 1 51 the display M UNE GAY CO 0 and confirm wi ote recursive function gt Select HOLIDAY NEW 5 V At this point the instrument activates the E V and confirm with Ok Fa recursive function that makes is possible Sm Choose the relay onto which mo to program multiple holiday days in series F 1101 to carry out the or holiday periods programming aw If you do not want to enter another gt Select between HOLIDAY ONE DAY E holiday day or period press 1 to end single day or HOLI
8. DAY PERIOD programming a multiple contiguous days The correlation of the programmed with C1 and C2 holiday events is not controlled with the recursive function the function must gt Enter the date holiday day or therefore be considered as facilitated the holiday day interval holiday programming period 14 User manual memo AST2 The instrument s memory makes it possible to store up to 4 holiday periods 20 holiday days Once the maximum capacity is reached an attempt to store an additional program will cause the following message to be displayed Ok to confirm gt Choose the relay onto which liri DUI to visualize the program gt Select HOLIDAY CHECK and press Uu or holiday with C1 and C2 MEMDRS ES gt CH di y HOLIDAY ONE DAY H L Hd ed The message ERROR appears on the display if you try to enter a ie f ESC holiday period that overlaps with a period that was already entered to Pin 2 or if the last holiday date is before the start date EN In case of HOLIDAY ONE DAY it is possible scrool the programs using 2 2 Checking a program C1 and G2 keys In case of HOLIDAY PERIOD the instrument shows the start day of the first holiday period press 62 to visualize the end This menu can be used to display modify or delete a holiday program of the period saved in the ins
9. IN code Use the keys C1 and G2 to enter the numbers one by one that make up the code and press Ok to confirm them select RESET to deactivate the PIN code request gt press Ok to confirm 1 gt The following message appears on display din the case of reset User manual memo AST2 If the PIN code request is active the CH SETTING RESET menu keypad will be locked approx 3 minutes after the keypad was last pressed this This menu is used to reset all settings that were made restoring the point when pressed again a request to factory values enter the PIN code will appear Data format dd mm yy CET DST change automatic To unlock the instrument enter the PIN according tathis a summer time change Last Sunday in March 2 00 am Winter time change Last Sunday in October 3 00 am key a 1 Correction key C1 2 Sunrise 0 minutes C2 3 Sunset 0 minutes key Ok 4 PIN request 0000 deactivated For example pin 3411 62 Ok 47 a To reset the settings gt select RESET SETTINGS with the 61 and C2 keys gt confirm with Ok gt confirm again with Ok gt the following message appears on the display 91 User manual AST2 HOUR METER MENU RESET MENU The hour meter function indicates the total time in which the outp
10. INTERRUTTORI CREPUSCOLARI ASTRONOMICI Manuale d Uso memo AST2 Astronomical twilight switches User Manual Index Safety warnings Technical characteristics Dimensions Connection diagrams Display and keypad description Installation Setting the language Setting the date format Setting the date Setting the time Setting the coordinates province capital Manual operation Switching on off manually Switch lock Pre set programs P1 program P2 program P3 program P4 program P5 program P6 program pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag sk sk sk a C CO O0 4 O O1 B BW User manua Automatic operation 1 NIGHT PROGRAM C1 menu 1 1 NIGHT C1 display 1 2 Change NIGHT C1 2 Menu HOLIDAY PROGRAM 2 1 Creating a HOLIDAY program 2 2 Checking a program 2 2 1 Displaying a program HOLIDAY 2 2 2 Changing a program HOLIDAY 2 2 3 Deleting a program HOLIDAY 3 Programs reset B Settings menu LANGUAGE menu DATE menu TIME menu CET DST CHANGE menu POSITION menu CORRECTION menu PIN menu SETTING RESET menu Hour meter menu Reset menu IR Interface Copy function Paste function Battery replacement Reference standards memo AST2 pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag p
11. The following message will appear on the display E d DATE menu gt Select SETTINGS DATE with G1 and Menara C2 are confirm with Ok The current dateis eded MM 7 displayed Press Ok twice to access the change mode or 4 to exit without changing select the format with G1 and C2 dd mm yy or yy mm dd confirm with Ok enter the year month day with 61 and G2 and press Ok to confirm gt The following message will appear on the display SHV E ci gt gt gt Em EN gt gt TIME menu gt Select SETTINGS TIME with 61 and C2 gt confirm with Ok The current time is displayed gt Press Ok twice to access the change mode 4 to exit without changing User manual memo AST2 gt enter the time minutes with Lob ME GAY E d will appear on the display and C1 and C2 LES the instrument will return to the main and press Ok to confirm page if the function is active press gt The following message will appear C2 to view change the DST gt on the display SHV d n n n change ESC gt Press Ok twice to change the uv c3 parameters or C2 again to DL TER 00 CET DST CHANGE menu display the parameters relative rit L to the DST gt change s
12. ag pag pag pag pag 12 12 12 13 14 14 15 15 15 16 16 17 17 17 17 18 19 20 20 21 22 22 23 23 24 25 25 Astronomical twilight switches 0 9 9 9 et i 66 61 7 9 e Large display with text guide to facilitate programming e Seable cover and possibility to lock keypad through password Astronomical twilight switches IR remote control available as an 9 9 9 accessory for transferring programmes Instrument to manage electric ES 4 from and to the instrument utilities between the hours of i sunset and sunrise which are automatically calculated by the instrument based on the geographical coordinates inserted MIE Two output relays 4 d a relay 1 programmable by choising qe so between 6 pre set programs relay 2 with fixed programmation 2 in P1 Possibility of a programmes archive up to 126 always 6 available VE Cover on the back of the instrument for replacing the battery 7 User manual memo AST2 SAFETY WARNINGS 1 The instrument must be installed and activated by qualified personnel following the connection diagrams provided in this manual scrupulously 2 After installation it must be made impossible to access the terminals without specific tools 3 Before accessing the connection terminals verify that the leads are not live 4 Do not connect or power the instrument if any part o
13. e that were set during the installation phase To change a parameter gt Select SETTINGS POSITION with C1 and C2 and press to confirm H H gt f Italian is set as the language it is possible to select to change only the 2 LLILUS CI province or make a change using the geographical t coordinates EN EN LOK x de if you want to change the province select CAPITAL POSITION and press Ok The currently set province will be displayed press Ok to access the change mode and select the new province with C1 and G2 and confirm with Ok At this point the message SHY E d will be displayed to indicate the change that was made gt Select the parameter to change from among latitude longitude or time F4f zone and press Ok to confirm H m LIN J gt The parameter value is NO CUO displayed CIM Lor J press Ok to access i uos the change mode EU DU ESC gt Setthe new value with _ C1 C2 and press Ok to confirm EI gt The following message will appear on the display SHY User manual memo AST2 CORRECTION menu This function is used to change the sunrise and sunset time that is automatically calculated by the system maximum correction 120 minutes To display th
14. e calculated sunrise and sunset times gt From the main page press The currently calculated sunrise and sunset times will be displayed in sequence To change the sunrise and sunset time gt Select SETTINGS CORRECTION i F and confirm with cc gt Select the time to correct C1 A and C2 da correggere sunrise or sunset 5 Cob ON FE IWIN gt Confirm with Ok The Currently set correction is displayed Press Ok ESC 7 again to change the value gt Set the correction with C1 and G2 and press Ok EH to confirm use negative values to advance the event positive values to delay the event 220 gt The message Ed appears on the display to indicate the change that was made At this point pressing Ok on the main page the corrected sunrise and sunset times are displayed again PIN menu A protection code can be set to prevent anyone from using the instrument The PIN code is a 4 digit number that has values between 1 and 4 To set the pin code gt select SETTINGS PIN with the keys 1 and C2 gt confirm with Ok gt the four digits that make up the current PIN code are displayed 0000 corresponds to pin inactive gt confirm with Ok select CHANGE and press to enter the new P
15. et Clon Switch lock and switch off at dawn 12 2 Activating the lock function all Switches x are ignored The relay remains in the Sunset Sunrise status in which it was found when the LI re 101171 1 p2 program lock was set E gt Press and hold G1 C2 for LJ ULC tl seconds to activate deactivate the Clam C2 This program keeps the relay in the off PET relay 1 relay 2 lt position throughout the night 10 ert If the function is active the following 1205 symbol will appear gg P2 or EH Sunset Sunrise 10 User manual memo AST2 program This program sets switch on at sunset and switch off at dawn with a night time 1 interruption in which the relay is temporarily in the off position 12 ER E OFF P3 OFF P3 Sunset Sunrise P4 program rur ix OFF This program sets switch on at sunset e and switch off during the night at a Ci programmable time before dawn i TEE ER I P4 on OFF P4 OFF Sunset Sunrise P5 program This program sets switch on at a programmable time after sunset and switch off at dawn OFF P5 ON Sunset Sunrise P6 program This program sets an on impulse during the night with programmable initial time and duration of the impulse The impulse s maximum duration is 59
16. ey C1 decreases the value menu back EI ES KIO switching relay 1 lock relay 1 Key G2 increases the value menu forward switching relay 2 lock relay 2 Key resets settings Field text1 day 2 Field text2 date 3 Field relay status 4 Field time 5 Field lock relay switching lock 6 Field day of the week User manual memo AST2 gt Use a pointed object to press the key to reset it The display INSTALLATION segments will turn on for a few seconds then the instrument will switch to IR reception mode e The instrument is supplied with the battery not installed to prevent M f failure IR useless consumption Remove the battery from its package and mol P GASE e 915 PONGE ANNIE Riso HOM insert it in the housing on the back of the instrument so that the pole is visible as shown the Battery replacement box Then secure the cover turning it clockwise c1 c2 ok HET RI CE ZI ONE Cor yy C2 Oo LLL og 0 12315671 ER e Press the 41 key to exit the IR reception mode if you want to transfer programs from the remote control see the IR Interface pag 23 e this point the parameters required for correct instrument opera tion can be entered language date format date ti
17. f it is damaged 5 The instrument must be installed and activated in compliance with current electric systems standards 6 Do not use the instrument for purposes other than those indicated Code Model Description VE343000 572 Astronomical twilight switch 2 relay Has TECHNICAL CHARACTERISTICS Power supply 230Vac 1090 50 60Hz Absorption 8VA 2W Replaceable battery Output 2 relays with monostable change over contact 16 10 A 250Vac Type of action 1B Storable programs 6 pre set programs 4 periods 4 20 holiday days Backlit LCD display Integrated IR interface with 0 5m capacity with direct sun light 2m when dark IR transmission frequency 31 25kHz Software class A Mounting DIN rail to backplane Container 2 DIN modules Operating temperature 20 C 40 C Storage temperature 10 C 70 C Pollution level 2 Rated impulse voltage 4kV Degree of protection IP20 at the terminals User manual memo AST2 DIMENSIONS CONNECTION DIAGRAMS sd User manual memo AST2 DISPLAY AND KEYPAD DESCRIPTION Field holiday program Field CET DST Field key functions NA NA NA NA NA NZD TA TA TA TA TA TT er 9 0 a eA m 6 5 8 Key 41 menu esc check battery activation AE 23456718 Key Ok confirm value activation IR transmission cm 6 K
18. lay 3 seconds ERHNSM EE Oo cium gt press the Ok key again to confirm the start of transmission or 1 to cancel the transmission gt during the transmission the following ae message will appear on the display QUE HEH Non the remote control display and the remote control will emit bips When completed the following message is displayed LRANGM UNE User manual memo AST2 Paste function problem with the transmission is signalled with the message VEd Led on the clock s display To transfer program from the remote control to one or more memo ASTA first At this point the programs and date and time settings are transferred to the ELA x gt connect the memo 2 clock to the mains network instrument and it is ready to operate with 1 1 the transferred parameters LT ne C2 gt press the key to reset we the instrument and activate c1 c2 ox d the reception mode The following message will appear on the em e 7 display Pi CEZ UNE UN Hi 0 t 41 LINE rine gt activate the transmission on the remote control and select which program to send see the instructions for the remote control ESC gt during the transmission
19. me geographical coordinates and any corrections or simply the province for Italy e Connect the load and the power supply as illustrated in the Con nection diagrams chapter 26 User manual memo AST2 Setting language Setting the date format FORMAE 5 languages FO ON ILS IUD It is possible to select between Jd MM LILI are available te AN the dd mm aa and 11 Italian English c2 yy mm dd formats FL IF MHE Spanish French NISI ICI German gt Select the format with 117101 oo ENGLI LH t2 C1 and C2 gt Select 4 D c1 the language Lb INL gt Confirm with Ok with c2 C1 and C2 22 UNG 2 i LI J Setting the date gt Confirm 2 2 x n Ba ee with Ok MP The parameter me mo LI INDLIFI V year month day UT LIE 077 24 lou Cru being changed will flash CII IL 1 gt Select the desired value 1 2 with G1 and C2 D ITU T le JUIL DCUMcc m a gt Press Ok to confirm unm and continue qat er uns Sp ST with the next parameter The insertion sequence is 5
20. onditions User manual memo AST2 IR INTERFACE The memo AST2 has an IR interface that makes it easy to exchange programs between the instrument and its remote control Attention the IR interface can only be activated if memo AST2 is powered by the mains network In this way an instrument can be programmed then the program can be copied to a remote control and then duplicated in other instruments without having to repeat the programming step by step The program exchange remote control is not provided with the instrument but can be purchased separately as an accessory Code Model Description VE345500 memo RC1 IR remote control Italy VE366100 memo RC2 remote control Ita Eng Fra Deu Esp There are two basic functions in this operating mode COPY consists in transferring the programs from a memo AST2 to the remote control PASTE consists in transferring the programs from a remote control to one or more than one memo AST2 instruments at the same time 295 Copy function To transfer a program from memo AST2 to the remote control first gt generate a program with the traditional method memo AST2 see Automatic programming gt activate the reception mode on the remote control see the relative instruction sheet gt activate the transmission on memo AST2 holding down the m 0 key for 3 seconds 00 The following message will appear Na on the disp
21. rogram HOLIDAY A program can be deleted from the program display status gt Confirm with Ok or press 1 to exit without resetting gt Select the holiday program to delete and press Ok gs E LI E gt Select DELETE with C1 and C2 roe Note the program reset function can also 0 1 FIM and press Ok to confirm or accessed from the Reset menu to exit without deleting see Reset menu chapter The message Et Ed will appear cm the display and the instrument will return to normal operation EN E os 16 User manual memo AST2 SETTINGS MENU This menu is used to display and change the instrument s general configuration parameters These are language date time automatic CET DST position correction pin reset From the normal operating status mum INLI 1 gt press e gt select SETTINGS with G1 62 gt confirm with Ok Ea LANGUAGE menu The options are Italian English Spanish French German gt select SETTINGS LANGUAGE with L 01 and gt confirm with The currently language will be displayed ESC 75 gt press Ok twice to access the change mode or 41 to exit without changing gt select the language with C1 and C2 gt confirm with Ok gt
22. seconds ON OFF P6 Sunset P6 ON P6 OFF Sunrise C1 DU E Em 1 V DU LIL rac CINTRA C1 do p Em Em Note the relay 2 has a program set to P1 it cannot be modified The selection of the night time behaviour is therefore only limited to relay 1 Note the dawn and sunset times are automatically calculated by the instrument on the basis of the astronomical coordinates entered and of any time adjustments see chapter Settings User manual memo AST2 AUTOMATIC OPERATION 1 1 NIGHT C1 display From the normal operating status JAL HR rio gt Press key 12 gt Select PROGRAM with C1 and C2 The default settings are as follows sar Running program P1 on relay 1 Running program P1 2 cannot To be modified Buh gt and confirm with Ok The NIGHT PROGRAM C1 menu allows T gt Select NIGHT PROGRAM C1 with 61 E you to program the behaviour of relay 1 2 and confirm with Ok by assigning a different program for each day of the week isplay show gram for the first night of the week in the P1 The holiday menu allows you to enter example in the night between 2 ima individual days or holiday periods during Cays Wand
23. trument At this point pressing Ok it is possibile access to options of modify delete or next holiday period 2 2 1 Displaying a program HOLIDAY From the normal operating status H N L cH 2 2 2 Changing a program HOLIDAY gt Press 4 to access the menu and L 1 program can be changed from the program display status select PROGRAM with C1 and C2 gt Confirm with Ok gt Select the holiday program to change and press Ok gt Select PROGRAM HOLIDAY and press gt Select MODIFY with C1 and C2 Qk to confirm ER LOK and press to confirm 15 User manual AST2 gt At this point new program parameters NAI 1 3 Programs reset can be entered The parameter being changed will flash Use the keys 61 Program reset make it possibile to delete all holiday events days and and C2 to set the values and press periods saved in the instrument and re load P1 in each relays Ok to confirm or 4 to exit without changes From the normal operating status ESC EH OK When done with the change the message gt Press e BALE COM GAY E d is displayed and the instrument gt Select PROGRAM with C1 and VILIS I will return to normal operation 62 and confirm with Ok CUL gt Select PROGRAM RESET with C1 mre see and G2 and press Ok to confirm 2 2 3 Deleting a p
24. ut remained in the on status The hour meter range is between 0 and 99999 hours when the maximum limit is reached it is automatically reset The instrument s default status can be reset with the reset function There are 4 different resets available reset settings deletes all settings that were made reset programmes deletes all saved programs To display the hour meter value gt from the main page press 41 gt select HOUR CNT with 1 and C2 gt press Ok to confirm gt choose with C1 and C2 the output concerned gt press Ok The total use is displayed gt press Ok again to access the hour meter reset option Press Ok again to confirm or 41 to exit without resetting gt The message Et Ec appears the display to indicate the change that was made ESC reset hour meter resets the operating time hour meter reset all reset settings reset programs reset hour meter To perform the reset gt press 4 to access the menu gt select RESET with the keys C1 and C2 and press Ok gt use the keys C1 and C2 to select one of the above listed resets and press Ok gt press Ok to confirm To perform a complete instrument reset restoring the factory settings use a sharp instrument to press the key This deletes all the settings that were made and restores the default c
Download Pdf Manuals
Related Search