User Manual
Contents
1. Do not make any unauthorized changes or alterations to the product Only use accessories intended for this product 3 Description 3 1 Components The following components are included within the scope of delivery of the AQUATEC Ocean XL Shower and Toilett Commode Ocean Ocean XL User manual Backrest with backrest cover and armrests Seat frame with seat plate Side parts with wheels 2 x Footrests with heel strap 2 x Clips 2 x for footrest inserted Clips 4 x for seat frame Allen key AF 4 Screws 4 x and curved washers 4 x eo o ojmeooje o Base stabilization tube with screws 4 x and nuts 4 x Ocean XL only Stabilization tube with spacers screws and nuts The following parts are included within the scope of delivery of the self propelling wheels with parking brake Shower and Toilet Commode Ocean Ocean XL Self propelling wheels 2 x Parking brakes 2 x Hubs 2 x Please note the change in dimensions when the self propelling wheels are fitted The details are provided in the technical data 3 2 Identification label The identification label also contains important information i 10 OCEAN 6 885316 Isn sy mn C amp en e kg O m 113204 2012 2013 2014 mmt TRIES 72. to Washing at high temperatures can cause shrinkage Do not dry covers in the tumble dryer Shower and Toilet Commode Ocean Ocean XL 7 3 Changing the wheels WARNING Risk of accident due to incorrectly fitted A wheels The wheels must be replaced by a specialist dealer 8 After use 8 1 Storage IMPORTANT Risk of damage Store the product in a dry area at a temperature of bet ween 0 C and 40 C air pressure of 860 1060 hPa and humidity of 30 75 Do not store the product near heat sources Keep the product out of direct sunlight 8 2 Re use The product is suitable for repeated use The number of times it can be used depends on how often and in which way the product is used Before reuse clean and disinfect the product thoroughly and check the safety functions and reset if necessary 8 3 Disposal The disposal and recycling of used devices and packaging must comply with the applicable legal regulations Please refer to the manufacturer for details of the proper and complete disposal After use Troubleshooting 9 Troubleshooting 9 1 Identifying and repairing faults o The following table provides information on malfunctions and ji their possible causes If you cannot correct the malfunction using the remedies named please contact your dealer directly Shower and Toilett Commode Ocean Ocean XL Fault Possible cause Remedy Adjusting the seat height is difficult due
3. 8 9 101112 01 04028698113204 21 12CEC1234560X Conformity mark Product timeframe Serial device number Load capacity Note use only on flat surfaces Glo olojeo Note observe accompanying documents Device designation o The identification label is positioned on the inside of theright ji hand side part Assembly and installation 4 Assembly and installation 4 1 Safety information 1 IMPORTANT Check the parts for transport damage before commissio ning and contact the dealer if required Ensure during assembly that the parts are positioned cor rectly with respect to one another 4 2 Assembling the shower and toilet commode This section describes the assembly Disassembly takes place in the reverse order Fitting the side parts Remove the enclosed clips from the bag 2 Place the seat frame on its side 1 IMPORTANT Push the side part evenly onto the frame and do not twist Secure the side part at the same height front and rear Assembly and installation 3 Push the side part amp with the guides for the footrests forwards on the seat frame B 4 Bring the clip mounts on the front and back of the side part in line with a hole in the seat frame 5 Insert the clips from the outside into the side part until both ends enclose the seat frame tube B 1
4. flat press the seat plate down at the sides and then at the front and back until the seat plate snaps into the seat frame 6 Transport 6 Safety information o The product can be dismantled for transport into the parts of the scope of delivery Section 3 1 Components Disassemble the product see Section 4 Assembly and installation Maintenance 7 Maintenance 7 1 Maintenance and inspection If the cleaning and safety notices provided are observed the product will be maintenance free Check product regularly for damage and to ensure that it is securely assembled In the event of damage and or likely repairs contact the dealer immediately The product must be checked by an authorized dealer before every re use or after 24 months at the latest see Manufacturer s recommen dation for rehab products of the SPECTARIS industrial association 7 2 Cleaning and disinfection The product can be cleaned and disinfected using commercially availa ble agents 1 IMPORTANT In the sensitive area of the bathroom hygiene is particularly important Keep the product clean at all times and wash it regularly gt Disinfect the product by wiping down all generally accessible surfaces with disinfectant after disassembling the product if possible 1 IMPORTANT All cleaning agents and disinfectants used must be effective compatible with one another and must protect the materials they are used to clean For f
5. the end stop 7 Release the button 8 Press the retaining balls outward so that they are behind the hex nut Remove the wheels using the same procedure in the reverse order Shower and Toilett Commode Ocean Ocean XL 5 Usage 5 Safety information A WARNING Lock the parking brakes in the park position Only use the shower and toilet commode on a flat surface and only indoors gt Observe the specifications on the identification label Do not overload the shower and toilet commode Always perform a visual inspection of the product for exter nal damage before each use gt Do not use a faulty product WARNING Risk of slipping and rolling Ensure before using that the seat surface is securely fixed to the seat frame Lock all four wheels using the red foot levers before sitting into the commode or standing up from it as well as in the parking position Apply the parking brake when the self propelling wheels are fitted optional WARNING Risk of tipping Swivel the footrests to the side before sitting down or standing up or fold the footplates up Do not stand on the footrests CAUTION Risk of pinching When using the self propelling wheels optional do not insert your fingers between the spokes or the rotating self propelling wheels and the seat frame while moving Shower and Toilet Commode Ocean Ocean XL 5 2 Swiveling the armrests A CAUTION Risk of getting fingers cau
6. Aquatec Ocean Ocean XL EN DE FR IT ES NL PT This manual must be given to the user of the product Before using the product read this manual and safe it for future reference Shower and Toilet Commode User Manual Dusch und Toilettenrollstuhl Gebrauchsanweisung Fauteuil chaise pour douche toilettes Mode d emploi Carrozzina da doccia e WC Istruzioni per l uso Silla de ducha y WC Manual de instrucciones Douche en toiletrolstoel Gebruiksaanwijzing Cadeira de banho Manual de instruc es AQUA TEC Yes you can EN DE FR IT ES NL PT Complies with Directive 93 42 EEC concerning medical devices The launch date of this product is stated in the EC declaration of conformity Konform mit Richtlinie 93 42 EWG fiir Medizinprodukte Der Markteinf hrungszeitpunkt f r dieses Produkt ist in der EG Konformitdtserkldrung angegeben Conforme la directive 93 42 CEE relative aux dispositifs m dicaux La date de lancement de ce produit est indiqu e dans la d claration CE de conformit Conforme alla direttiva 93 42 CEE relativa ai prodotti medicali La data di lancio di questo prodotto indicata nella dichiarazione di conformit CE Cumple con la directiva 93 42 CEE relativa a los productos sanitarios La fecha de lanzamiento de este producto figura en la declaraci n CE de conformidad Conform richtlijn 93 42 EEG voor medische hulpmiddelen De datum waarop dit product op d
7. IMPORTANT Ensure that the left and the right side parts are set to the same height 6 Turn the seat frame and repeat the procedure on the second side part 7 Set the seat frame with the fitted side parts on its wheels Adjusting the seat height 1 IMPORTANT The seat height is to be adapted to the user It is generally correctly adjusted if the user can sit on the shower and toilet commode with both feet resting on the floor Change the height to the same level on both sides Do not adjust the seat height while there is someone sitting on the shower and toilet commode Raise the shower and toilet commode slightly on one side by the seat frame 2 Remove both clips on this side 3 Pull the seat frame out of the side part or push it into the side part to adjust the seat height 4 Push both clips back in completely 5 Raise the other side and set to the same height as described Shower and Toilett Commode Ocean Ocean XL Fitting the base stabilization tube Ocean XL only Fit the base stabilization tube using the screws and nuts B supplied between the side parts Shower and Toilet Commode Ocean Ocean XL Fitting the backrest Secure all four wheels To do this press down on the red foot lever on the wheels 1 IMPORTANT Ensure that the armrests point forward when in the unfol ded position 2 Insert the backrest from behind into the seat frame until the c
8. e markt wordt gebracht staat vermeld in de EG verklaring van overeenstemming Em conformidade com a directiva 93 42 CEE do Conselho relativa aos dispositivos m dicos A data de lan amento deste produto indicada na declara o CE de conformidade 9 AQUATEC Operations GmbH Every effort has been made to ensure that the contents of this publication are fully up to date at the time of going to print As part of its ongoing improvement of products AQUATEC Operations GmbH reserves the right to modify existing models at any time AQUATEC dealers will be notified of any such modifications Any use of this publication or of parts thereof as well as any reproduction of images must have the written consent of AQUATEC Operations GmbH Contents l l 1 2 1 3 1 4 1 5 2 1 3 1 3 2 4 1 42 4 3 5 1 52 5 3 5 4 5 5 6 1 General General information Symbols Warranty Intended use Service life Safety Safety information Description Components Identification label Assembly and installation Safety information Assembling the shower and toilet commode Fitting removing the self propelling wheels optional Usage Safety information Swiveling the armrests Swiveling the footrests Removing fitting a heel strap Removing fitting the seat plate Transport Safety information OO ao uUunWmuun pH HR HL HD BD NNNNNN O8 7A LL 7 3 8 1 8 2 8 3 9 1 10 10 1 10 2 Maintenance Maintenance and inspection Cl
9. eaning and disinfection Changing the wheels After use Storage Re use Disposal Troubleshooting Identifying and repairing faults Technical data Dimensions and weight Materials 13 13 13 14 14 14 14 14 15 15 16 16 16 Shower and Toilet Commode Ocean Ocean XL General 1 1 General information This user manual contains information and notes on the proper and safe use of the shower and toilet commode Please read this user manual carefully before using the product The position specifications A B C etc in the handling instructions always refer to the preceding figure 1 2 Symbols Warnings In this User Manual warnings are indicated by symbols The warning symbols are accompanied by a heading that indicates the severity of the danger A WARNING Indicates a hazardous situation that could result in serious injury or death if it is not avoided A CAUTION Indicates a hazardous situation that could result in minor or slight injury if it is not avoided IMPORTANT Indicates a hazardous situation that could result in damage to property if it is not avoided Tips and recommendations Oo Gives useful tips recommendations and information for effici ent trouble free use 1 3 Warranty We provide a manufacturer s warranty for the product in accordance with our General Terms and Conditions of Business Guarantee claims can only be made through the relevant dealer General Quality Quality is o
10. en key supplied 5 Remove the securing clamp D with the nuts from the inside of the backrest frame Shower and Toilett Commode Ocean Ocean XL 6 Remove the backrest bracket with the armrest and move it upwards o The smaller hole serves to fix the retaining clamp 7 Insert the screws in the armrest bracket and guide them through the holes in the backrest frame 8 If required put the nuts back into the retaining clamp 9 Place the retaining clamp on the backrest frame so that the fixing on the retaining clamp projects into the smaller hole 10 Turn the screws in the nuts and tighten l Pass the belt of the backrest cover that is still open on the outside of the backrest frame close and tighten all belts 1 IMPORTANT The armrests are lowered using the same procedure When converting to the lower position the belt that lies beneath the armrest must be opened and passed inside the backrest frame Shower and Toilet Commode Ocean Ocean XL Assembly and installation Fitting footrests Adjusting the inclination of the footplates 1 IMPORTANT 1 IMPORTANT gt The assembly is the same for the right and left footrest The inclination of the footplates is continuously adjustable gt Set the right and left footrest in the exact same way Il Loosen the Allen head screw on the footplate using a size 4 Allen key 2 Turn the footplate to the desired position 3 Retighten the Allen head screw 4 3 Fi
11. f the utmost importance for our company all processes are based on ISO 9001 and ISO 13485 The product meets the requirements of DIN EN 12182 Should you require further information please contact the relevant INVACARE subsidiary in your country contact addresses are provi ded on the back of this user manual 1 4 Intended use The shower and toilet commode is designed exclusively as an aid for showering or bathing going to the toilet or for transferring patients while indoors Do not use for any other purpose A WARNING Risk of injury Never use the product as an aid for getting into or out of a bathtub for climbing or descending as a support or for similar purposes Do not use the product outdoors As a toilet commode you can use the product over a standard toilet or independently with the commode pan optional The shower and toilet commode may only be used as a bathing stool in a pool if the pool does not contain salt water and an attendant is present at all times Temperature for use 10 65 C 1 5 Service life The expected service life of this product is three years when used in accordance with safety instructions and intended use stated in this manual The effective service life can vary according to frequency and intensity of use Safety 2 Safety 2 1 Safety information A WARNING Risk of injury Do not use a faulty product gt In the event of a malfunction contact a dealer immediately
12. ght in the flap mechanism Do not grip the joint when folding the armrests up or down Make sure that no parts are caught in the mechanism Do not grip between the armrest and the backrests when folding up 5 3 Swiveling the footrests Entry position exit position Pull the footrest amp in the guide a little upwards until the groove no longer engages in the pin of the clip O 2 Swivel the footrest to the side Driving position CAUTION Risk of accident due to loose footrest Fix footrests in the driving position Turn the footrest 9 inwards Transport 2 Push the footrest downward until the groove engages in the pin of the clip 5 4 Removing fitting a heel strap Open the Velcro strip on the heel strap 2 Remove the screw from the underside of the footplate 3 Remove the heel strap from the flexible plastic pin Attach the strap using the same procedure in the reverse order 1 IMPORTANT e i When installing ensure that the Velcro strip of the heel strap is facing backwards 5 5 Removing fitting the seat plate Removing l Pull the seat plate upwards on both sides Fitting CAUTION Risk of getting fingers caught Do not insert fingers between the seat surface and the seat frame when pressing down on the seat plate Place the seat plate on the seat frame with the cutout to the front 2 Push the seat plate backwards as far as it will go 3 With your hand
13. ollar abuts the seat frame tube 1 IMPORTANT The rounded part of the curved washers must sit on the seat frame tube Firmly tighten the screws using the Allen key supplied The torque is 5 Nm Check the screws regularly to ensure they are sitting securely 3 Position a curved washer B on each screw and secure the back rest on the left and right with two screw on each side Assembly and installation Adjusting the backrest cover The tension of the backrest can be adjusted as desired Tightening Pull the belts amp of the backrest cover tighter Loosening Open the buckles B by squeezing the retaining lugs together arrows 2 Push the belts back a little through the buckle 3 Close the belt buckles 4 Retighten the belts gently Assembly and installation Adjusting the height of the armrests 1 IMPORTANT to Adjust the height of the armrests to suit the user Change the height of the armrests evenly on both sides Set the height of the right and left armrest in the exact same manner On the backrest cover open the buckle of the belt that passes on the inside of the backrest frame 2 On the backrest cover open the buckle of the belt O that runs above the armrest 3 Pass this belt on the inside of the backrest frame and reclose i The nuts are inserted loosely in the retaining clamp and can fall out 4 Unscrew the screws B of the armrest bracket using the All
14. olypropylene Backrest Nylon PVC coated cover Footrests Polypropylene glass fiber reinforced Side parts Polypropylene glass fiber reinforced Armrests Polypropylene Wheels Plastics and stainless steel
15. to Deposits between the seat frame Disassemble product into the stiffness and seat part parts of the scope of delivery and clean thoroughly Wheel is not turning at all or only with Dirt between the fork and the rim Clean wheels thoroughly difficulty It is difficult to turn the footrests Deposits in the guides Remove footrests and clean thoroughly Parking brake of the self propelling wheels Parking brake incorrectly adjusted Adjust the parking brake optional does not engage Shower and Toilet Commode Ocean Ocean XL 10 Technical data 10 1 Dimensions and weight Total width Ocean 560 mm Total width Ocean XL 640 mm Total width with self propelling wheels 675 mm Depth 934 mm Depth with self propelling wheels 1060 mm Depth without footrests 700 mm amp Depth of footplate 155 mm Height 964 1094 mm D Height to armrests 680 850 mm D Height from footrests to seat 255 495 mm Seat width 480 mm Seat depth 450 mm Technical data Seat height 477 600 mm Min width between the side parts approx 381 mm amp Min distance between the floor and the bracket for the commode pan approx 408 mm Weight approx 15 kg Load capacity Ocean 150 kg Load capacity Ocean XL 180 kg 10 2 Materials Frame Stainless steel powder coated Seat plate P
16. tting removing the self propelling wheels optional Push the footrest B with the footplate into the guide at the front of the side part D until the groove amp engages with the pin of B the clip The footrest can no longer be turned to the side Adjusting the height of the footrests Pull the footrest up a little 2 Pull out the clip amp and push it back in in the desired position If required pull out the footrest a little further to do this 3 Push the footrest downwards until the groove engages with the pin of the clip 4 Set the second footrest to the desired height as described Usage A IMPORTANT When the self propelling wheels are fitted the rear wheels must remain locked The assembly is the same for the right and left self propel ling wheel gt The hubs and the parking brakes for the self propelling wheels must be fitted by a dealer Assembly is described in the assembly instructions Assembling the hubs and brakes for Aquatec Ocean 24 wheels Align all four wheels in the driving direction 2 Lock all wheels 3 Push the axle on the self propelling wheel inwards The handrims project outwards 4 Press and hold the button on the outside of the axle This releases the retaining balls at the end of the axle 5 Raise the shower and toilet commode a little 6 Insert the axle into the hub B and push in the self propelling wheel onto the axle until
17. urther information on decon tamination in Healthcare Environments please refer to The National Institute for Clinical Excellence guidelines on Infec tion Control www nice org uk CG002 and your local infection control policy Clean by hand Clean without scouring agent Shower and Toilett Commode Ocean Ocean XL Cleaning in a domestic environment IMPORTANT Risk of damage Do not disassemble the brackets for the accessories Remove any accessories fitted Pull the footrests out of the guides Remove the seat plate and the backrest cover Remove the side parts see Section 4 Assembly and installation Reinsert the clips in the seat frame immediately so that they are not misplaced 6 Wash the individual parts using a cloth or brush and commercially available cleaning agents and disinfectants 7 Rinse the parts with warm water Dry the parts with a cloth 9 Re assemble the product see Section 4 Assembly and installation Ui 06 co Cleaning in a hospital environment A In addition to cleaning as described above clean the product at regular intervals at 85 C for 3 minutes in the autoclave CAUTION Risk of burning your skin Allow the product to cool after cleaning in the autoclave Cleaning the backrest cover optional Il Remove the backrest cover 2 Wash the cover in a washing machine at max 60 C using a mild detergent IMPORTANT Risk of damage
Download Pdf Manuals
Related Search