HD Rear Mirror DVR HDDVR225
Contents
1. the recorder will automatically save the record and off 3 Photographing Function In power on state press lt Camera gt button to enter photographing mode Upper left corner of the camera screen at this time has been converted into a camera icon press the camera button again to take pictures To switch back to video mode short press video recording button twice 4 Motion Detection In standby state press and hold lt Emergency Lock gt to enter the motion detection mode When the lens senses a moving object peripherally the DVR enters the video recording state When the lens senses no moving object within five seconds the DVR stops video recording To exit the motion detection mode press and hold Down for three seconds then the video recording function stops working 5 Collision sensing 5 1The built in collision sensor G sensor please set the menu G sensor sensitivity first If a serious vehicle collision when the accident occurred recorder will lock the front 10 seconds and after 20 seconds of image data Such as the collision occurred after the segment recorded 30 seconds then the length of time a special file to record 50 seconds Meanwhile screen lock icon is displayed at the top right locked image will be saved as a special file the file will not be overwritten cycle Note 1 Locked video file named LOCK ordinary record file for NORMAL 5 2 Collision sensor G sensor supports sensitivity adjustment You can change the settings ac2. HD Rear Mirror DVR HDDVR225 User Manual CINE TZ Buttons Functions Description 1 lt Power gt button 2 lt Menu gt button 3 lt Page up gt lt Video record gt 4 lt OK gt button Emergency Lock 5 lt page down 6 lt Mode gt button 7 lt Display Backlight gt 8 TF card slot 9 AV OUT Interface 10 USB Interface 11 lt Reset gt button 12 lt Sensors gt Camera Button Function Introduction 1 lt Power gt Button 1 1 Power on off In power off state press and hold lt Power gt button for three seconds to turn power on the DVR In power on state press and hold lt Power gt for three seconds Then the DVR saves the video recording file automatically and is powered off 2 lt Menu gt Button 2 1 Menu setting In standby state press lt Menu gt to enter the function setting table of the main menu Press lt Up gt or lt Down gt to select the desired option in a submenu and press lt OK gt to confirm the selected option After completing the setting press Menu to exit the menu setting function Menu setting method are the same as in the video mode camera mode playback mode 3 Up lt Video record gt Button 3 1 Start Video record function In video recording mode press lt Video record gt to enter the video recording mode and press lt Video record gt again to stop video recording 3 2 Page Up In menu setting or playback mode press lt Video record gt to page up In
3. cording to the actual needs in the Settings menu 6 A key lock function The machine has a key lock function will retain need image locking without coverage In the video record mode short press lt lock gt button the DVR will lock the image about the first 10 seconds and later 20 seconds the image 7 Date and Time Setting In standby state press and hold lt Menu gt to enter the Setting menu Press lt Up gt or lt Down gt to move the cursor to the lt Set the date gt option Press lt OK gt to confirm the date and enter the lt Setting gt menu Note To effectively record the date and time of obtaining the evidence of traffic accidents please set a correct date and time before using the DVR 8 A mute function keys In working condition press the lt down gt button the screen changes the microphone icon indicating it is muted meaning the audio recording feature is turned off At this time recorder only records the image does not record sound Short press the lt down gt button again the screen icon in the bottom left of the microphone to remove mute Note Settings are automatically saved when restart no need to set mute function 9 U Disk Mode Connect the DVR to the USB interface of a PC by using a data cable Screen displays disk camera charging three optional modes Press the lt up gt lt down gt button to select the disk option press the lt ok gt button to enter the U disk mode Note When using a compute
4. normal state press and hold lt Video record gt for three seconds to reverse the current image 3 3 take photos In standby state press lt Camera gt button to start the camera mode and press lt Camera gt again to take one photo 4 lt OK gt Button 4 1 Locking In video recording state press lt Emergency Lock gt to start emergency lock in case of vehicle collision saving the video data generated during the period of 10 seconds before occurrence of the accident and 20 seconds after occurrence of the accident as a special file This special file will not be cyclically overwritten 4 2 Confirmation In standby mode short press the lt Menu gt button to enter the Main Menu mode press on lt up gt lt down gt to browse press lt OK gt button to determine 4 3 Motion Detection In standby mode long press and hold lt OK gt for three seconds to switch to motion detection when not recording video press lt OK gt button again to exit motion detection Note In this mode the recording will not loop and will stop recording once the card is full 5 lt Page Down gt 5 1 Close Audio record Function In video record mode press lt Audio record gt to close the audio recording function Then the microphone icon in the lower right of the screen is marked with X indicating that audio recording is disabled Press lt Audio record gt again to enable audio recording and the X mark disappears 5 2 lt Page Down gt In menu set
5. r to copy video files it is recommended to use a card reader to copy the video files TF card to a computer
6. the edge of the windshield when the car wiring 6 The rear camera installed in the rear of the vehicle pay attention to the direction of the installation Cabling can be laid along the vehicle roof After completing the installation insert the plug in the DVR rear camera interface 7 Adjust the angle of the DVR ensuring that the camera lens keeps level with the ground 8 Start the engine and check whether the machine has been installed correctly Note When the machine is installed correctly the system working lights Video light blinks the machine starts to enter the recording state Remember to check if the display screen is normal Function Introduction 1 Automatic Recording Start the car engine the recorder automatically starts and opens the recording function automatic recording function open Turn off your vehicle engine the recorder automatically saved recordings and shut down The recording video is stored in segments in TF card When TF card memory is full the recorder will overwrite earlier recorded image This is called Loop Recording Note a You can set the time period of recording in a menu The time period can be set to 1 minute 3 minutes 5 minutes and 10 minutes The default time period is 3 minutes b the recording video of front camera is stored in the TF 100DSCIM folder 2 Manual Recording Short press Up Button to start automatic recording Video light flashes To turn off press the UP button for 3 seconds again
7. ting or playback mode is page down function 6 lt Mode gt button 6 1 Playback In power on state press and hold lt Mode gt button to start the file playback mode Press lt Up gt or lt Down gt to select the desired file and press lt OK gt to play or suspend the file Press and hold lt Mode gt again to exit the playback mode 6 2 take photo In power on mode press lt Mode gt button then the screen by the camera icon in the upper left corner converted into a camera press the video button to take pictures To switch back to video mode short press lt Mode gt button 7 Screen backlight In power on state press and hold lt Mode gt button to disable the screen backlight press any button to restore the screen backlight this function only works on the screen without affecting the video recording function 8 lt Reset gt Button Ifthe DVR is crashed press the lt Reset gt button to restart the machine Operation Guide DVR installation Note DVR must be charged for 4 hours before installing 1 Power off the automobile engine 2 Insert the TF card into the TF card slot Note Please use the high speed TF card Clas6 above capacity should be not less than 512MB TF card maximum support 32GB 3 Secure the DVR to the rear mirror of the automobile 4 Put the car charger into the car cigarette lighter 5 Use Charging extension cord connect the recorder s USB port with car charger Note charge the extension cord laying along
Download Pdf Manuals
Related Search