Clothes Dryer - Appliances Online
Contents
1. Haier INN IVE DESIGN Clothes Dryer OWNER S USER MANUAL Model HDY60M IMPORTANT SAFETY INSTRUCTIONS Warning To reduce the risk of fire electric shock or personal injuries the following basic precautions should be followed This appliance should only be used for its intended purpose as described in this owner s user manual This appliance must be properly installed in accordance with the installation instructions before it is used 3 Never unplug your appliance by pulling on the power cord Always make sure the outlet is switched off then grasp the plug firmly and pull straight out from the outlet 4 Replace worn power cords loose plugs and faulty power outlets immediately 5 Unplug your appliance before cleaning or before proceeding with any repairs Repairs should only be carried out by an authorised technician 6 Do not operate your appliance when parts are missing damaged or broken 7 Do not operate your appliance in the presence of explosive fumes or toxic flammable vapours 8 Do not use this appliance to wash clothes which are stained spotted or washed in gasoline dry cleaning solvents or any other explosive or flammable substances that may ignite and explode 9 Do not try to remove clothes while the dryer is in motion Wait until it comes to a complete stop 10 The lid must be closed when the machine is in operation 11 Do not2. ed on the nameplate The dryer must be securely grounded Preparation of the laundry load The dryer can only dry laundries which have been spun dry Do not put in laundry which is still dripping wet or still have excess water Make sure all pockets are empty before placing them in the dryer Pull up zippers sew and mend up loosened fasteners and tie up dispersed ribbons to prevent the laundry from being entangled If necessary put small items in a laundry bag To achieve a better drying result loosen up heavy loads before loading it into the dryer Load to dry Laundry type Cotton fabric Synthetic fabric Maximum load 6kg 3kg Warning Reference weight of fabrics for drying 1 Avoid drying wool silk and other delicate fabrics as it may damage it 2 Do not exceed the laundry load as suggested This could damage the dryer as well as the laundry load Jeans ns Hi 950 Pajamas Blended fabric appr 200g clothes Shirt irts por 8006 rY A fener 000 Q T shirt wi Q Cb Underwear appr 300g 414 CS D appr 70g Sock ocks D blended fabrics Jackets cotton SA appr 5 pr 50g appr 800g Single bed sheets Woolen blankets cotton appr 800g appr 3000g OPERATING INSTRUCTIONS 1 Power up Insert the power plug into an appropriate power outlet that is properly installed and grounded Operating power supply 220 240V 50Hz 2 Laundry loading Open the door and load the laundry
3. est online appliance retailer CONTROL PANEL Please do not turn the timer es OE jes knob to this two gray area of the program cycle 30 min Cool m Warm 100 min 200 mies 150 min Dryer timer the timer will let you set the time for up to 200 minutes to dry your clothes depending on the load of the clothes This dryer has two program types The light Blue colour area is cool wind program and the dark Blue colour area is warm wind program In cool wind program the heater does not work and the clothes are dried by cool wind In warm wind program the heater works and the clothes are dried by warm wind At the last 20 minutes of the warm program the heater stops work and the clothes cool down There is an arrow on the timer knob Turning the timer knob the arrowhead points to the time you choose and the dryer begins to work Then the timer will count down and the program knob will counter clockwise until the arrowhead points to OFF appliancesonline __ CLEANING AND MAINTAINANCE WARNING Unplug the power cord prior to any cleaning Cleaning the surface Wipe off any dust or dirt on the body of the dryer and surface off the main control panel Note Do not use excessive water Just a damp cloth is fine Do not use solvent Do not use spray cleaners when cleaning the interior Do not use harsh or abrasive cleaners Cleaning the filter screen To ensure a good ventilation effect during drying the filter screen m
4. ine appliance retailer TROUBLE SHOOTING SPECIFICATIONS Those listed below are not failures The following must be confirmed before ees Type HDY60M calling for service Possible Cause Power supply 220 240 50Hz ls the dryer plugged in Maximum operating current A ls the local circuit out of power Batedioadika a Se The dryer does not start Is the door closed properly g 2000 Has a drying program been set Maximum power W Was the correct drying program set ina igs aa Deseo eee ls the filter screen clean Weight kg 30 The drying result is not Did the amount of the loaded laundry good exceed the rated load Wat f level IPX4 Was the loaded laundry spun dry an anna Did the laundry become twisted whilst drying WIRING CIRCUIT D POWER K Door Lock C Capacitance M Motor appliances online Th Thermostat Tf Fuse R Heater Australia s largest online appliance retailer O E
5. into the drum of the dryer For a more energy efficient and better drying result make sure the load has been spun dry Try to loosen the load when placing in the dryer Note Check labels on clothing before placing them in the dryer Some articles are not suitable for machine dry High temperature may damage the fabric 3 Setting drying time Turn the timer knob to set an optimal drying time according to the laundry You can choose cool wind cycle or warm cycle according to your needs Note Before you set the drying time ensure your hands are dry 4 Program completion Warm wind cycle Before the drying time comes to end the dryer will interject cold air to cool off the clothes After the timer stops the arrowhead of the timer knob will point to OFF Open the door to remove the laundry Cool wind cycle Throughout the cycle the heater does not activate The laundary is dried by cool wind Note 1 To avoid timer interruption please do not turn the timer knob to the gray area of the program cycle 2 Clothes should go through a cooling down airing phase of the cycle If for any reason the dryer is stopped before the cycle has finished dry clothes should be removed immediately and not left in the dryer Clothes should be spread out to cool and not left bunched eg in a clothes basket Before you open the door please switch off the power supply 5 Cleaning the dryer Please clean the filter after use every time appliances online Australia s larg
6. osed to water or where it is damp 23 Clean lint filter before and after each load TABLE OF CONTENTS OPERATING INSTRUCTIONS IDENTIFICATION OF PARTS 200000eeeuee OPERATING INSTRUCTIONS 0000eeeae CONTROL PANEL 23 ccccesev snd eececiveei weds CLEANING AND CARE GUIDE CLEANING AND MAINTAINANCE 4 INSTALLATION UNPACKING YOUR DRYER 0000seeeeeee WALL MOUNTING INSTRUCTIONS TROUBLE SHOOTING AND SPECIFICATIONS TROUBLE SHOOTING 0 0c cece ene enee WIRING CIRCUIT a6 se cae ee ei eeete reseed SPECIFICATIONS 00 ccs n eens IDENTIFICATION OF PARTS PAGE Control Panel Timer knob ere 6 Adjustable Outlet Door Grille and Lint Filter 5 oe ee ae 8 9 11 Power Supply Cable Back plate Air Intake Grille This diagram may slightly differ from the layout of the dryer you have just purchased as this is due to technical improvements and should only be used for reference m appliances on ine com au Australia s largest online appliance retailer OPERATING INSTRUCTIONS Attention 1 Before operation clean off any dust and dirt inside the drum of the dryer with a damp towel 2 Clean off any debris on the lint filter and in the duct to increase the drying efficiency Turning on power Before turning on the power of the dryer check Whether the supply voltage is in accordance with the value indicat
7. the wall and mark the bracket position e A minimum 50mm is needed between the top of the dryer and the ceiling for ease of installation e If mounting above a washing machine allow sufficient room to open the lid of the washer Drill amp 3mm Bit For plaster Wooden wall Philips head screw driver Plastic Spacers Wall hanging brackets Description Hanging hook Wood screws 12g 50mm imber screws 2 Fix the wall hanging brackets to the wall securely eg into the stud If the studs are too far apart fit a timber slat to the studs then mount the brackets onto the slat The distance between each bracket is 553mm as per diagram 553mm i NP Oe screw Australia s largest online appliance retailer 9 WALL MOUNTING INSTRUCTIONS 3 To install the hook to the dryer remove the 2 screws and 2 corks as indicated in Fig 1 2 screws 4 Align hooks as shown in Fig 2 and each hook should be fixed up well with three screws Install the spacers provided as Fig 2 10 WALL MOUNTING INSTRUCTIONS 5 With assistance mount dryer on wall brackets See Fig 3 Fig 3 6 A new control panel film with inverted symbols supplied Peel the release paper from the back of inverted film then place the film on the surface so that writing is the correct way up 11 Australia s largest onl
8. use this appliance for commercial applications 12 Do not operate this appliance unless all panels are properly intact 13 The appliance is not to be used by children without adult supervision 14 This appliance must be connected to an approved electrical outlet with 240V power source M Doo 15 Do not repair or replace any part of the appliance This can only be carried C 2 out by an authorised technician 16 To reduce the risk of electric shock or fire try not use extension cords or 2 adapters to connect the unit to electrical power source 17 Items that have been previously cleaned washed soaked or spotted with flammable or explosive substances should not be placed in the tumble dryer 18 Items containing foam rubber latex foam or similar texture should not be placed in the tumble dryer 19 Fabric softeners or similar products should not be used in the tumble dryer Please read this manual carefully before operating your dryer unless specified by the manufacturer Retain this for future reference 20 Undergarments that contain metal reinforcements should not be placed in the Record the model and serial number of the tumble dryer tumble dryer Damages caused by this will not be covered under warranty T 7 i T icle such as shower caps baby waterproof napkin Please have this information ready for any service related enquiries appliances ee eed Austr thg amp atunhle pe RE retailer 22 Do not install this appliance where it is exp
9. ust be cleaned before or after each use 1 Removing the filter Gently push together the clip on the filter screen and then pull out towards yourself 2 Cleaning the filter Remove the lint with a soft brush or vacuum cleaner Pay attention and do not damage the filters At the same time remove any remaining lint from the perforated metal lint screen on the door 3 Re installing the filter After cleaning filters put the screen back in place Note Never operate your dryer without the lint filter Australia s largest online appliance retailer a UNPACKING YOUR DRYER e Dimensions a 825 mm b 560 mm c 595 mm Weight 30 kg Packing accessories Check list of the accessories and materials provided with the machine Owner s Wall e To ensure the dryer operating normally attention must be paid to the following in placement The rear of the dryer must not have any restriction to the intake of fresh air Check whether there is any damage to the dryer during transportation Any damaged dryer must not be electrified In case of any damage contact your dryer supplier The dryer must be kept away from flammable substances The surrounding environment must be dry and ventilated To allow the dryer to perform better the ambient temperature shall neither be lower than 10 nor higher than 35 WALL MOUNTING INSTRUCTIONS 1 Determine the location of the dryer on
Download Pdf Manuals
Related Search