Moxa VP-IR2 Series User`s Manual
Contents
1. use an appropriate pole mount kit To mount the VP IR2 to a pole choose a pole mount adapter that is suitable for the size of the pole and then mount the VP IR2 to the adapter 3 Mounted to a VP camera housing and VPort camera Use the nut and bolt included in the package to attach the VP IR2 to a VP camera housing The following example illustrates how to install the VP IR2 to a VP CI701 housing and VP CI800 bracket a Install the VPort camera in the VP CI701 camera housing b Pull the VP IR2 s power and I O cable through the VP CI800 bracket The end of the cable with loose electric wires should be pulled out from the top of the bracket as illustrated in the following photograph 38 HA E the VP CI701 housing Completely tighten the waterproof connector after the cable is pulled through Moxa VP IR2 Series Introduction 4 Connect the power wires to the power source and the I O wires to the VPort camera There combination Power I O cable has 6 wires Red 12 VDC power With a 12 VDC power input the power consumption is about 12 VDC power 10 watts Alarm input In Passive mode connect with VPort s Relay to switch the Alarm input illuminator to ON or OFF Alarm output In Active mode connect with VPort s DI to switch the VPort to Alarm output DAY or NIGHT mode a Passive mode connection FRELAY rD HF N b Active mode connection rRELAYS r Step 1 Turn the Active Pass2. VP CI701 s housing and mount the VP CI800 s bracket on the housing Step 2 Install the housing and bracket on the wall or panel Step 3 Attach the VP IR2 to the housing with the nut and bolt provided in the package NOTE Be sure to install the VP IR2 onto the VP CI701 housing and VP CI800 bracket before you install it on the wall NOTE Follow the same process if you are installing the VP IR2 to another housing or camera 1 3 A Product Specifications VP IR2 Series Infrared Wavelength Angle VP IR22080 20 IR Effective Range VP IR22080 60 to 100 m VP IR26080 20 to 50 m Automatic IR On Off Controlled by internal light sensor or external I O Operating Temperature IP Rating ICR Switching Input Volt free relay output NOTE You can mount multiple VP IR2 IR illuminators pointing in the same direction to increase the illuminated distance and area
3. designed specifically to work with Moxa VPort series IP cameras It features high power efficiency and a long LED life cycle and is suitable for all types of industrial surveillance applications The VP IR2 can be easily mounted on a VPort camera housing Package Checklist e VP IR2 series IR illuminator Model Name Description VP IR22080 Infrared LED illuminator 20 850 nm 12 VDC 60 to 100 m effective range VP IR26080 Infrared LED illuminator 60 850 nm 12 VDC 20 to 50 meter effective range e Nut and bolt for mounting the VP IR2 to a VPort camera housing e Power and I O cable NOTE Moxa s VP IR2 Series is shipped with the mounting bracket attached to the body When installing the VP IR2 use an appropriate screw to attach the VP IR2 mounting bracket to a wall or use the provided nut and bolt to attach the VP IR2 mounting bracket to an appropriate device or frame NOTE Check the model name on the VP IR2 s side label to verify that you received the model you ordered NOTE This product must be installed in compliance with your local laws and regulations Moxa VP IR2 Series Introduction Physical Description A Front cover made with PMMA protective material JJ Main body Protective cover for the DIP switch and sensitivity adjuster I O0 Power amp Signal I O E Photo cell light sensor Mode Description The VP IR2 series supports 2 modes Active mode The Illuminator will be switched On o
4. Moxa VP IR2 Series User s Manual Third Edition August 2015 www moxa com product MOXA O 2015 Moxa Inc All rights reserved Moxa VP IR2 Series User s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement Copyright Notice Trademarks 2015 Moxa Inc All rights reserved The MOXA logo is a registered trademark of Moxa Inc All other trademarks or registered marks in this manual belong to their respective manufacturers Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa Moxa provides this document as is without warranty of any kind either expressed or implied including but not limited to its particular purpose Moxa reserves the right to make improvements and or changes to this manual or to the products and or the programs described in this manual at any time Information provided in this manual is intended to be accurate and reliable However Moxa assumes no responsibility for its use or for any infringements on the rights of third parties that may result from its use This product might include unintentional technical or typographical errors Changes are periodically made to the information herein to correct such errors and these changes are incorporated into new editions of the publication Technical Support Contact Inform
5. ation Moxa Americas Toll free 1 888 669 2872 Tel 1 714 528 6777 Fax 1 714 528 6778 Moxa Europe Tel 49 89 3 70 03 99 0 Fax 49 89 3 70 03 99 99 Moxa India Tel 91 80 4172 9088 Fax 91 80 4132 1045 www moxa com su ort Moxa China Shanghai office Toll free 800 820 5036 Tel 86 21 5258 9955 Fax 86 21 5258 5505 Moxa Asia Pacific Tel 886 2 8919 1230 Fax 886 2 8919 1231 Before Getting Started Before using your VP IR2 read the following information O The VP IR2 is designed for the following applications 1 For use with Moxa VPort series IP cameras to enhance night view images 2 For use independently as an illuminator O To prevent damage or problems caused by improper use read this user s manual before operating the device and peripherals O If you experience a system error and the system cannot be recovered please contact your local distributor Table of Contents EMU OCU CUION its ates eee levee ed a A A 1 1 Package C CC ENS ete Senter se eee ee ie See ee ee ee ee Eee ee eee ee eee ce ee eer eee errr ree 1 1 PARK Goes LDESCRIDEO aimee merenen rem Cre Cre ner eR tre Tere RTI RTT RETR erie eR ICR eT TTR RR Tea TTT Om cer ea nna ter ten Oe rr EE E gen Ne nO ee ae 1 2 Mode DESCIPUO ets crest A reer reer rr seer ts 1 2 DIMENSIONS UNIES Mes ies des ie ena tens daus ne beta aaa ota 1 3 JC La A EC 2 1 MS Pet COR CA CEN EA EN RR RS CRIA 2 1 1 Introduction The VP IR2 series IR illuminator is
6. ive mode switch to 1 Step 2 Connect the alarm input blue wire with the Relay s NO normal open pin Step 3 Connect the alarm input white wire with the Relay s C common pin Step 1 Turn the Active Passive mode switch to ON Step 2 Connect the alarm output yellow wire with the DI s IN pin Step 3 Connect the alarm output green wire with the DI s ground pin 1 2 Moxa VP IR2 Series Introduction 5 Configure the VPort s operation to synchronize with the VP IR2 a Passive mode configuration Day Night DI Control High Low Switch v wl Trigger relay output when day night mode switch Relay status is Deactivated w when day mode Relay status is Activated when night mode Step 1 Configure the VPort s light sensor Step2 Enable the Trigger relay output when day night mode switch The relay status should be in Deactivated status for day mode and Activated status fir night mode b Active mode configuration Day Night Day Night Light Sensor Switch lux level L1 vel Detect duration 3 sec 1 to 60 sec Di Control High Low Switch w LI Trigger relay output when day night mode switch Relay status is Deactivated when day mode Relay status is Activated when night mode Step 1 Configure the DI control to High Low Switch 6 Complete the installation with the VP camera housing and brackets Step 1 Close the
7. r Off automatically based on the reading of the internal photocell light sensor The user can adjust the sensitivity of the light sensor on the back panel Passive mode The Illuminator will be switched On or Off based the camera s I O signal In this mode the illuminator can be controlled by the camera s built in light sensor Switch for Active Passive Sensitivity adjuster mode for light sensor 1 2 Moxa VP IR2 Series Introduction e Switch for Active Passive mode When the switch is in the ON position it is in Active mode When the switch is in the 1 position it is in Passive mode e Sensitivity adjuster for light sensor The adjuster can be set to any value between 3 Lux and 200 Lux e 3 Lux Rotate to the maximum clockwise U position e 200 Lux Rotate to the maximum counterclockwise UY position Dimensions unit mm 115 0 2 340 2 Front View Side View Rear View 1 3 Usage In this chapter we describe how to install and synchronize the VP IR2 Installation The VP IR2 IR illuminator is usually used together with a Moxa CCTV camera The VP IR2 can be installed in the following ways 1 Mounted to a wall use an appropriate screw The VP IR2 comes with a mounting bracket already attached that can be mounted to a wall Use an appropriate screw to mount the unit to a wall and then connect the power and I O cable to the camera that the VP IR2 will be used with 2 Mounted to a pole
Download Pdf Manuals
Related Search