Home

Samsung SC7910 User Manual

image

Contents

1. 4 Cleaning the Brushroller 1 Turn off the vacuum cleaner and unplug the power cord 2 Remove the cover to expose the brushroller 3 Cut off any lint carpet pile or hair that has accumulated around the brushroller with a pair of scissors Replace the brush cover Dore Failure to frequently clear the agitator ends and bearings of pet hair or other accumulation could possibly result in the bearings seizing and stopping the roller burning the belt and even damaging the motor and power nozzle base Samsung is not responsible for the improper or lack of cleaning of the agitator roller and warranty will not apply in these cases END CARE OF MOTOR FILTER The motor filter protects the motor from dirt and ensures long lasting and efficient operation When the filter becomes dirty wash it in warm water dry it thoroughly and position it in place BnoTe Replacement filters or bags can be bought from your local Samsung distributor IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY Motor does not start Suction force is gradually decreasing No power supply Thermal cut out Nozzle suction hose or tube is blocked Check cable plug and socket Leave to cool Check for blockage and remove Cord does not rewind fully Check that the cord is not twisted or wound unevenly Pull the cord out 2 3m and push down the cord rewind button Vacuum cleaner does not pick up
2. a Em Operating instructions For household use only VACUUM CLEANER BEE Before operating this unit please read the instructions carefully Register your product at www samsung com global register IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be followed includ ing the following READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire electric shock or injury 1 Do not leave appliance when plugged in Unplug from outlet when not in use and before servicing 2 Do not use outdoors or on wet surfaces 3 Do not allow to be used as a toy Close attention is necessary when used by or near children 4 Use only as described in this manual Use only manufacturer s recommended attachments 5 Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropped into water take it to a service center 6 Do not pull or carry by cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces 7 Do not unplug by pulling on cord To unplug grasp the plug not the cord 8 Do not handle plug or appliance with wet hands 9 Do not put any object into openings Do not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow 10
3. Keep hair loose clothing fingers and all other parts of the body away from openings and moving parts 11 Do not vacuum anything that is burning or smoking such as cigarettes matches or hot ashes 12 Do not use without dust bag and filters in place 13 Turn off all controls before unplugging 14 Use extra care when cleaning on stairs 15 Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present 16 Store your vacuum cleaner indoors in a cool dry area 17 Do not use extension cords or an outlet with inadequate current carrying capacity 18 Hold plug when rewinding onto cord reel Do not allow plug to whip when rewinding 19 Unplug electrical appliances before vacuuming them 20 The hose contains electrical wires Do not use if damaged cut or punctured Avoid pick ing up sharp objects 21 Always turn off this appliance before connecting or disconnecting either hose wand or motorized nozzle SAVE THESE INSTRUCTIONS To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install the proper out let Do not change the plug in any way END PARTS IDENTIFICATION HANDLE ON OFF SWITCH SUCTION CONTROL POWER CONTROL
4. SWITCH EXTENSION WANDS HEIGHT ADJUSTMENT KNOB HEAD LIGHT CLAMPER FOR DUSTBAG COMP ARTMENT ON OFF BUTTON POWER BRUSH DUST FULL INDICATOR If the Dust Full indicator changes to RED while you are cleaning the dust bag requires replacement OTE If the Dust Full indicator continues to display RED even after changing the dust bag turn the cleaner off and check whether the hose tube or nozzle is clogged ASSEMBLING THE VACUUM CLEANER FOR USE Attaching the Hose to the Canister Slide the Hose Clamper into the canister Inlet until it Clicks into place Fig A A Attaching the Extension Wand to the Hose Slide the handle end of hose over the end of the wand until it Clicks into place Fig A B They can be removed by pressing the button on the Hose Attaching the Power Brush Slide the end of the Extension Wand onto the Power Brush Wand unitl it Clicks into place Fig A C They can be removed by pressing the button on the Extension Wand EXTENSION WAND The Extension wand can be adjusted to your height Hold the central area with one hand while pulling the smallest tube out or pushing into the desired length with the other hand POWER CORD 1 PULLING OUT The power cord is long enough to be drawn out for convenience 2 REWINDING Upon finishing cleaning disconnect the plug from the electrical outlet and press t
5. DE L ASPIRATEUR L embout de machine du boyau Ins rer Pembout de machine du boyau dans l entr e de l aspirateur jusqu ce que vous entendiez un click Fig A A La poign e du boyau et le tube t lescopique Ins rer la poign e du boyau dans le tube t le scopique jusqu a ce que vous entendiez un click Fig A B Ce tube peut tre retirer en appuyant sur le bouton barrure situ a la poign e Ajuster le balai lectrique au tube t lescopique lt Ins rer le bas du tube t lescopique dans le x coude du balai lectrique jusqu ce que vous entendiez un click Fig A C TUBE T LESCOPIQUE Le tube t lescopique peut tre ajust la longueur d sir e Tenir la partie du centre du tube fermement d une main et tirer sur le tube inf rieur avec autre main R gler la longueur d sir e CORDE D ALIMENTATION 1 DEROULER La corde d alimentation est d une bonne longueur pour que vous puissiez la d rouler une longueur confortable 2 ENROULER Lorsque vous avez termin votre nettoyage d brancher la corde d alimentation de la prise et appuyer sur le bouton pour enrouler votre corde facilement J ote Pour d brancher la corde d alimentation assurez vous de tenir la fiche et non pas la corde seule INTERRUPTEUR ARRET DEPART Avec la fiche ins r e dans la prise de courant appuyer l g rement sur l interrupteur Arr t D p
6. SAC DE POUSSI RE 1 Pour ouvrir le compartiment du 2 Enlever le sac de poussi re sac pousser le levier qui est situ au devant du compartiment vers le haut 3 Ins rer le carton du nouveau sac dans 4 Fermer la porte du compartiment le support de plastique Dore Si vous utilisez un sac en tissu r utilisable veuillez le nettoyer et r ins rer dans le compartiment Dore Le sac de papier peut tre scell utilisant la languette collante situ e pr s de l entr e du sac De cette fa on la poussi re ne peut s chapper du sac plein UTILISATION DE L ASPIRATEUR AVEC LE BALAI LECTRIQUE 1 Connexion du balai lectrique Le boyau doit tre reli l aspirateur et le balai lectrique doit tre reli au tube t le scopique ainsi que le boyau voir page 3 2 Utilisation du balai lectrique Pour de meilleurs r sultats passer le balai lentement d avant arri re et ne pas oublier de chevaucher pour redresser les poils du tapis Pour des tapis plus achaland s avec plus de salet r p ter le m me mouvement dans plusieurs directions au lieu de chevaucher Ajuster le bouton d l vation du rouleau pour assurer un nettoyage appropri DaveRTISSEMENT Ne pas renverser le balai lectrique lorsqu il est en fonction 3 V rification de la performance du balai lectrique Vous pouvez lever le balai lectrique du pl
7. SE Absence de courant Les fusibles ont saut Le suceur ou les diff rents tuyaux sont obstru s SOLUTION V rifier le cable la fiche et la prise Les laisser refroidir V rifier s il y a un blocage et l liminer Le c ble ne doit pas tre compl tement rembobin V rifier que le c ble d ali mentation n est pas emm l ou mal enroul Tirer le cable jusqu 2 3m et baisser le bouton de rem bobinage L aspirateur n aspire pas la salet Fissure ou trou dans le tuyau V rifier le tuyau et le rem placer si n cessaire La succion est faible ou en diminution Le filtre est plein V rifier le filtre et le nettoyer si n cessaire suivant les instructions illustr es MEMO DJ68 00364E REV 0 0
8. ancher l g rement pour v rifier la performance du rouleau Le balai lectrique ne fonctionnera pas si il y a une obstruction Si le balai lec trique est obstru d brancher la corde d alimentation de la prise Renverser le balai et retirer l objet obstruant l entr e du balai L ENTRETIEN DU BALAI ELECTRIQUE 1 Enlever la porte du compartiment du balai lectrique e Avant d enlever toute pi ce d brancher votre appareil de la prise de courant e Enlever les 6 vis retenant la plaque de base et retirer la plaque 2 Remplacer l ampoule optionnelle 1 Retirer le dessus en plastique du 2 Enlever ampoule usag e Ins rer balai tel qu illustr plus bas la nouvelle ampoule Vous pouvez utiliser une ampoule de 120v 20W 3 Remplacer la courroie du rouleau Proc der d licatement lors du remplacement de la courroie Il y a une forte tension 1 Enlever le dessus en plastique du 2 Enlever la courroie us e du rouleau et balai Tenir le rouleau fermement et de la tige du moteur R ins rer une le retirer de son compartiment courroie neuve autour de la tige du moteur et du rouleau MOTOR SHAFT BRUSHROLLER 3 Replacer le rouleau dans son com 4 Assurez vous que la courroie ne soit partiment Assurez vous que pas tordue A l aide du doigt faire chaque bout du rouleau soit tourner le rouleau quelques fois pour bien ancr dans le compar
9. anufacturier 19 Assurez vous que l aspirateur n est pas en fonction avant de d brancher 20 Le flexible contient des fils lectriques Ne pas utiliser s il est endommag coup ou per for Eviter d aspirer des objets pointus 21 Toujours arr ter cet appareil avant de relier ou d brancher l un ou l autre tuyau une baguette magique ou un bec motoris CONSERVER CES DIRECTIVES mmm Pour r duire le risque d une d charge lectrique cet appareil poss de une fiche avec des lames polaris es une lame plus longue que l autre Cette fiche s ins re d une seule fa on dans une prise polaris e Essayez d ins rer la fiche d un c t et si cela ne fonctionne pas essayez du c t oppos Si cela ne fonctionne toujours pas demander un lectricien qualifi d installer la prise appropri e Ne pas d fier le but de la prise polaris e IDENTIFICATION DES PIECES INTERRUPTEUR ARRET DEPART BOUTON D ENROULEUR BOUTON DE VARIABILITE AUTOMATIQUE DE SUCCION TUBE TELESCOPIQUE BOUTON D L VATION DU DESSUS DU COMPARTI LUMI RET MENT DU SAC BALAI LECTRIQUE INDICATEUR DE SAC PLEIN Si l indicateur de sac plein appara t en rouge lors de votre nettoyage vous devez changer votre sac de poussi re pote si l indicateur de sac plein demeure rouge suivant le changement du sac de poussi re arr ter l aspirateur et verifier l objet obstruant le boyau tube ou balai lectrique ASSEMBLEMENT
10. art avec votre pied ar INTERRUPTEUR ARRET DEPART BOUTON DE VARIABILITE DE SUCCION Le niveau de succion peut tre ajust avec le bouton de variabilit d pendamment du nettoy age ex cut MIN pour des tissus d licats tels des rideaux MAX nettoyage de plancher et tapis r gulateur de succion manuel Vous trouverez la poign e un bouton pour r gler le niveau de succion Le plus vous fermez l ouverture le plus de succion vous aurez LES ACCESSOIRES e Brosse pousseter pour les meubles tag res livres etc e Brosse divan pour coussins et rideaux e Outil coin pour les petits coins plus troits entre les coussins du divan etc e Balai lectrique La brosse rotative assure un nettoyage en profondeur Appuyez sur l interrupteur Arr t D part vers Pavant Le balai lectrique en maintenant en marche STATIONNEMENT DU BALAI EL Grace au support situ a l arriere de l aspira teur vous pouvez ins rer l attache au coude du balai lectrique pour stationner celui ci TRANSPORT ET RANGEMENT DE VOTRE ASPIRATEUR Pour un rangement et transport facile l aspirateur est ME muni d une attache au tube qui peut tre ins r dans le support trouv sous l aspirateur De cette fa on votre aspirateur boyau tube et balai lectrique demeureront en position verticale REMPLACER VOTRE
11. dirt Crack or hole in hose Check hose and replace if required Low or decreasing suction Filter is full with dust Please check filter and if required clean as illustrated in the instructions MEMO Manuel d instructions Pour utilisation domestique seulement ASPIRATEUR M Avant d utiliser l appareil lisez attentivement ce mode d emploi Enregistrez vos produits Samsung en vous connectant sur www samsung com global register DIRECTIVES DE SURET IMPORTANTES Lorsque vous utilisez un appareil lectrique certaines pr cautions doivent tre exerc es incluant les suivantes LIRE TOUTES LES INSTRUCTIONS AVANT D UTILISER L APPAREIL CONSERVER CES DIRECTIVES ATTENTION Pour r duire le risque d un feu d charge lectrique ou blessure 1 Utiliser cet appareil tel que d crit dans le manuel 2 Ne pas laisser votre aspirateur sans supervision lorsqu il est branch ou en fonction D brancher l aspirateur apr s chaque usage et avant une r paration 3 Mettre toutes les contr les en position off avant d arr ter l aspirateur 4 D brancher l appareil lectrique avant de le nettoyer ou r parer 5 ATTENTION UNE D CHARGE LECTRIQUE POURRAIT SE PRODUIRE SI UTILISE DEHORS OU SUR UNE SURFACE HUMIDE 6 Cet appareil n est pas un jouet Une surveillance est n cessaire lorsque l appareil est utilis par ou pr s d un enfant 7 Ne pas utiliser si la corde ou fiche est end
12. he cord rewind button lightly with your toe Dore When removing the power cord from the electrical outlet grasp the plug not the cord END ON OFF SWITCH With the cord plugged into an electrical outlet start or stop the vacuum cleaner by stepping lightly on the switch button POWER CONTROL The suction power can be adjusted with the electrical power control to suit any situation MIN For delicate fabrics like net curtains MAX For hard floors and heavily soiled carpets Manual suction power control The flexible hose hose handle suction control has a manual air flow regulator which allows you to briefly alter the suction level the further open the regulator is the weaker the suction power USING THE ACCESSORIES e Dusting brush for furniture shelves books etc e Upholstery brush for cushions and drapery e Crevice tool for radiator crevices corners between cushions e Power brush The rotating brush ensures that cleaning is carried out more thoroughly OPERATING THE BRUSH HEAD Push the ON OFF switch A down The brush switches on PARK POSITION Located in the top rear side of the vacuum cleaner there is a support for a convenient park position during pauses when using the nozzle ON OFF SWITCH For easy storage and transportation this vacuum cleaner has a clip system built onto the body wh
13. ich will keep the tube hose and nozzle in a vertical position REPLACING THE DUST BAG 1 To open the dust cover of the dust 2 Remove the dust bag from the bag compartment press the cleaner clamp upward located at the side of the dust cover 3 After removing the used dust bag 4 Press the dust cover down gently insert the cardboard bag collar of the until the clamp relocks new dust bag into the suction inlet all the way TE If you are using a cloth filter bag clean it when it s full and use it again Dore used dust bag can be sealed by removing the paper from the adhesive strip and sealing the strip over the suction opening END VACUUMING WITH THE POWER BRUSH 1 Attaching the Power Brush The hose must be plugged into the canister and the power brush must be plugged into the hose and extension wand see page 3 2 Vacuuming For best results move the power brush slowly using short overlapping strokes For heavily soiled areas repeat strokes in several directions e Turn height adjustment knob to match the sur face being cleaned Beaurion Do not invert the power brush while it is running 3 Checking the Performance of the Power Brush You may check whether the power brush is operating correctly by lifting up the extension tube slightly to view the back of the brush The Power Brush will not operate
14. ommag e Si l appareil ne fonctionne pas pleine capacit a t chapp endommag laiss dehors ou plong dans l eau apportez le un centre de service 8 Ne pas tirer ou transporter l aspirateur par la corde utiliser la corde comme une poign e fer mer une porte sur la corde ou tirer la corde autour d une bordure tranchante ou coin aig Ne pas passer avec l aspirateur sur la corde Garder la corde loin des sources de chaleur 9 Ne pas tirer sur la corde pour d brancher Pour d brancher tenir la fiche fermement et tirer 10 Ne pas toucher la fiche ou l aspirateur avec des mains humides 11 Ne pas ins rer aucun objet dans les ouvertures Ne pas utiliser lorsqu une ouverture est bouch e 12 Garder les cheveux v tements doigts et toute autre partie du corps loin des ouvertures et pi ces mobiles brosse poign e etc 13 Ne jamais aspirer quelque chose qui est br lant ou qui d gage une fum e telle une ciga rette allumette ou des cendres chaudes 14 Ne pas aspirer des liquides inflammables ou combustibles tel de l essence et ne pas utilis er l aspirateur pr s de ces liquides 15 Ne pas utiliser l aspirateur pour ramasser de l eau ou aspirer une surface humide 16 Ne pas utiliser l appareil sans sac et filtres 17 Soyez prudent lors du nettoyage des escaliers Pour viter des blessures ou dommages l appareil doit demeurer au pied des escaliers 18 Utiliser seulement que les accessoires recommand s par le m
15. timent confirmer que toutes les pi ces fonc tionnent bien Replacer le dessus en plastique A eo Are yl AT EN HIN ox y NZ i ZASIL N MM lt 4 Nettoyer le rouleau 1 D brancher l aspirateur 2 Enlever la plaque de base pour exposer le rouleau 3 Enlever les poussi res cheveux poils d animaux qui se sont accu mul s autour du rouleau et chaque extr mit en utilisant une paire de ciseaux Replacer le rouleau dans le compartiment Bhote Un nettoyage fr quent du rouleau et des extr mit s du rouleau ainsi que des roulements bille pour liminer I accumulation des poils d animaux et autres poussier s est n cessaire si non vous risquez de saisir les roulements bille et le rouleau br ler la courroie et ou endommager le moteur ou la base du balai Samsung n est point responsable pour le manque de nettoyage ou nettoyage inad quat Aucune garantie n est applicable dans ces cas ENTRETIEN DU FILTRE MOTEUR Le filtre moteur prot ge le moteur de toute particule et assure un rendement pro long du moteur Lorsque le filtre devient sale nettoyez le avec de l eau ti de laissez le s cher et replacez le dans l aspirateur Porte Les filtres ou sacs a remplacer peuvent s acheter chez votre distributeur Samsung SI VOUS AVEZ UN PROBLEME PROBLEME Le moteur ne d marre pas La puissance de succion diminue CAU
16. when it is jammed or the unit is turned off If the Power Brush is jammed Unplug the power cord from the electrical outlet Turn the power brush over and remove the jammed object Turn the power brush back to vacuuming position and resume vacuuming MAINTAINING THE POWER BRUSH 1 Removing the Brush Cover e Before replacing any parts unplug the vacuum cleaner from the electrical outlet Remove 6 screws from the bottom plate and open the brush cover 2 Replacing the Headlight Bulb optional 1 Remove the Brush Cover as 2 Remove the old bulb from the bulb described below socket Insert the new bulb You can use a vacuum cleaner lamp rated 120V 20W 3 Replacing the Brushroller Belt Use with caution when replacing the belt that drives the brushroller Tension on the belt is high 1 Remove the brush cover Grasp the 2 Remove the flat belt from the motor brushroller firmly and pull it out shaft and the brushroller Loop the new belt around the motor shaft and then loop it around the brushroller Le Ai s Le BRUSHROLLER ES 5 MOTOR SHAFT 3 Reinsert the brushroller making 4 Be sure that the belt is not twisted sure that both ends of the Rotate the belt 3 or 4 times to position brushroller are fitted into the it correctly on the roller and to make grooves of the nozzle head sure all rotating parts move smoothly Replace the brush cover

Download Pdf Manuals

image

Related Search

Related Contents

Gigabyte GA-Z68M-D2H motherboard  Nitrox Recreational Mode Petrel 1 / Petrel 2 User Manual  Cables Direct 6m Cat5e  Bitrex Qualitative Fit Test Kit  User guide  Sospesa Manual  Manual - Amalgamated Instrument Co Pty Ltd  

Copyright © All rights reserved.
Failed to retrieve file