Samsung HW-H560 دليل المستخدم
Contents
1. D IN AUX HDMI BT TV or USB mode Input mode Display Optical Digital input D IN AUX input AUX S HDMI input HDMI o BLUETOOTH mode BT 5 TV mode TV TV POWER USB mode USB Q E SOURCE POWER SPEAKER TV SOURCE The unit turns off automatically in the following situations i o C e BT TV MODE om If there is not connected for about 25 minutes e USB HDMI ARC D IN MODE lf there is no audio signal for about 25 minutes e AUX Mode When the AUX cable is connected if no key is pressed on the remote or unit panel for about 8 hours lf the AUX cable is disconnected for about 25 minutes To turn the Auto Power Down function ON or OFF press and hold the play pause button for 5 seconds ATUO POWER DOWN ON OFF appears on the display at Aux mode KY The ARC function is activated in D IN mode if the unit is connected to an ARC supporting TV To turn off the ARC function turn Anynet off Use the provided cable if a USB flash memory device cannot be connected directly to the unit BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound all without wires What is Bluetooth Bluetooth is a technology that enables Bluetooth compliant devices to interconnect easily with each other using a short wireless connection e A Bluetooth device may cause noise or malfunction depending on usage when Apart of your body is in contact with the receivin2. Active Speaker System This unit features an Active Speaker System that provides high sound quality in a single slim unit This unit does not require any satellite loudspeakers or speaker cabling which are normally required by conventional surround sound systems USB Host support You can connect and play music files from external USB storage devices such as MP3 players USB thumb drives etc using the Soundbar s USB HOST function Bluetooth Function You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo all without wires LICENCE CX DOLBY DIGITAL Manufactured under Licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 2 0 Channel For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS 2 0 Channel is a trademark of DTS Inc DTS Inc All Rights Reserved Homi The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries To send inquiries and requests regarding open sources contact Samsung via Email oss request samsung com Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER
3. 3 Select the Stereo headset menu on the Bluetooth device e You will see a list of scanned devices 4 Select Samsung Soundbar from the list e When the Soundbar is connected to the Bluetooth device it will display Device name BT on the front display e f the Bluetooth device has failed to pair with the Soundbar delete the previous Samsung Soundbar found by the Bluetooth device and have it search for the Soundbar again e If the Soundbar is in another mode except TV mode you can shift it to Bluetooth mode using your smart device 5 Play music on the connected device e You can listen to the music playing on the connected Bluetooth device over the Wireless Audio Soundbar system e In BT mode Repeat functions are not available For some Bluetooth device Play Stop Next Prev function are not available LK You may be required to enter a PIN code password when connecting the Bluetooth device to the Soundbar If the PIN code input window appears enter z00005 The Soundbar supports SBC data 44 1kHz 48kHZ2 The AVRCP feature is supported Connect only to a Bluetooth device that supports the A2DP AV function You cannot connect to a Bluetooth device that supports only the HF Hands Free function Only one Bluetooth device can be paired at a time Once you have turned off the Soundbar and the pairing is disconnected the pairing will not be restored automatically To reconnect you must pair the de
4. SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates dangerous voltage A inside the product that presents a risk of electric shock or personal injury CAUTION oe This symbol indicates important instructions accompanying the product WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT e This apparatus shall always be connected to a AC outlet with a protective grounding connection e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable CAUTION e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times PRECAUTIONS pl 68 6mm 991mm Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product Install your product horizontally on a suitable base furniture with enough space around it for ventilation 3 4 inch es 7 10 cm Make sure the ventilation slots are not covered Do not place the unit on ampli
5. mode the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 16 25 ft 5m SNOILONNA If the Bluetooth device comes back into the effective range after disconnecting you can restart the Soundbar to restore the pairing with the Bluetooth device Using the Bluetooth Power on When the Soundbar is turned off connect your smart device to the Soundbar via a Bluetooth connection to turn it on 1 Pair your smart device with the Soundbar via Bluetooth For information on Bluetooth connections refer to your smart device s manual 2 Turn the Soundbar off and then press and hold the F button on the Soundbar front panel until the Soundbar displays Bluetooth Power On 3 Now whenever the Soundbar is off and you initiate a Bluetooth connection with your smart device the Soundbar will turn itself on automatically in Bluetooth mode Select the desired music to play from your smart device SOUNDCONNECT SoundConnect lets you play TV audio from a Bluetooth compliant SAMSUNG TV on your Wireless Audio Soundbar via a Bluetooth connection To produce TV sound on your Soundbar via a Bluetooth connection you need to pair your Soundbar to a Bluetooth compliant TV Once the pairing is established the pairing information is recorded and kept No further Bluetooth connection messages will appear e Bring the Soundbar and the TV close together before pairing e The unit will
6. Adjusts the Subwoofer level TONE Individual BASS TREBLE adjustment Use VOL adjustment keys Selects the Sound Effect MUSIC VOICE SPORTS CINEMA and STANDARD SURROUND SOUND This feature adds depth and spaciousness to the sound Surround Sound Expansion MUTE Mutes the sound from the unit Press again to restore the sound to the previous volume level IZ The remote control can operate TVs made by SAMSUNG only Depending on the TV you are using you may not be able to operate your TV with this remote control If you can t operate the TV using the TV s remote control Surround Sound Expansion Technology is Powered by Sonic Emotion Installing batteries in the Remote Control 1 Lift the cover at the back of 2 Install two AAA size batteries 3 Replace the cover the remote control upward as Make sure to match the and ends Assuming typical TV usage shown of the batteries with the diagram inside the the batteries last for about compartment one year Operational Range of the Remote Control You can use the remote control up to 23 feet 7 meters in a straight line from the unit You can also operate the remote at a horizontal angle of up to 30 from the remote control sensor TOYULNOD ALOWSAY connections INSTALLING THE WALL MOUNT You can use the wall mount bracket to mount this unit on a wall Installation Precautions e Install on a vertical wal
7. E 800 SAMSUNG 726 7864 OMAN MO SAMSUNG 26 7864 www samsung com ae support English KUWAN a vwww samsung com ae ar support Arabic BAHRAIN 8000 4726 i QATAR 800 2255 800 CALL EGYPT Paa www samsung com eg support ALGERIA 021 36 11 00 www samsung com n africa support PAKISTAN 0800 Samsung 72678 www samsung com pk support TUNISIA 80 1000 12 www samsung com n africa support JORDAN es www samsung com Levant support English 06 5777444 SYRIA 18252273 www samsung com Levant support English RAN 021 8255 www samsung com iran support MOROCCO 080 100 2255 www samsung com n africa support SAUDI ARABIA 920021230 www samsung com sa SUpport www samsung com sa_en support English TURKEY 44477 11 www samsung com tr support Africa NIGERIA 0800 726 7864 0800 10077 www samsung com africa_en support claus 0302 200077 COTE D IVOIRE 8000 0077 SENEGAL 800 00 0077 www samsung com africa_fr support CAMEROON 7095 0077 KENYA 0800 545 545 UGANDA 0800 300 300 TANZANIA 0685 88 99 00 RWANDA 9999 Www samsung com support BURUNDI 200 DRC 499999 SUDAN 1969 SOUTH AFRICA 0860 SAMSUNG 726 7864 BOTSWANA 8007260000 NAMIBIA 08 197 267 864 www samsung com support ZAMBIA 0211 350370 MOZAMBIQUE 847267864 827267864
8. E CONTROL POWER BUTTON TV POWER BUTTON Turns the Wireless Audio Turns your Samsung TV on and off Soundbar on and off SPEAKER SOURCE This button allows you to choose to listen to audio from the Soundbar or your TV TV SOURCE Press to select a connected TV s video source Anynet SoundConnect Anynet enables you to control other Press to select a connected Soundbar source AUTO POWER Synchronizes the Soundbar to a connected Optical source via the Optical jack so it turns on automatically when you turn on your TV REPEAT Samsung Devices with your Samsung Select Repeat File All Random TV s remote control Also produces TV sound on your TV VOLUME Soundbar via a Bluetooth connection Adjusts the TV volume level and controls the sound TV MUTE TV CHANNEL AUDIO SYNC Switches between the available TV channels Used to help sync video to audio when connected to a digital TV Mutes the sound from the TV Press again to restore the sound to the previous volume level TV INFO TV PRE CH Display current TV status Moves to the previous TV channel TV EXIT Exits TV functions same as the bab one ana EXIT button of the TV remote Play pause or stop playing a music file or search forwards or Bory Scapa reer earn SMART VOLUME backwards for a music file Regulates and stabilizes the volume SOUND EFFECT level against a drastic volume change VOLUME S W LEVEL Adjusts the volume level of the unit
9. HW H560 imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register ee features SoundConnect SoundConnect lets you play TV audio from a Bluetooth compliant Samsung TV on your Wireless Audio Soundbar via a Bluetooth connection and control the sound HDMI HDMI transmits video and audio signals simultaneously and provides a clearer picture The unit is also equipped with the ARC function which lets you listen to sound from your TV via an HDMI cable through the Wireless Audio Soundbar This function is only available if you connect the unit to an ARC compliant TV Surround Sound The Surround Sound feature adds depth and spaciousness to your listening experience Wireless Subwoofer Samsung s wireless module does away with cables running between the main unit and the subwoofer Instead the subwoofer connects to a compact wireless module that communicates with the main unit Special Sound mode You can select from 5 different sound modes MUSIC VOICE SPORTS CINEMA and STANDARD depending on the type of content you want to enjoy Multi function Remote Control You can use the remote control supplied with your Soundbar to control the TV connected to this unit Works only for Samsung TVs The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button
10. IO SYNC level Ca e Use TV PRE CH button to move to the previous TV channel in TV mode EMUSIC TV PRE CHATVIENT e To exit the TV menu use the TV EXIT button It functions the same as the CO EXIT button of the TV remote control J When you press the SoundConnect button the TV s sound is transmitted through the Soundbar system via a Bluetooth connection The Soundbar also controls the sound volume sound quality etc The remote control can operate TVs made by SAMSUNG only SOFTWARE UPGRADE Samsung may offer upgrades for the Wireless Audio Soundbar s system firmware in the future If an upgrade is offered you can upgrade the firmware by connecting a USB drive with the firmware upgrade stored on it to the USB port on your Soundbar Note that if there are multiple upgrade files you must load them onto the USB drive singly and use them to upgrade the firmware one at a time Please visit Samsung com or contact the Samsung call center to receive more information about downloading upgrade files J Insert a USB drive containing the firmware upgrade into the USB port on the main unit Do not disconnect the power or remove the USB drive while upgrades are being applied The main unit will turn off automatically after completing the firmware upgrade When software is upgraded settings you have made will return to their default factory settings We recommend you write down your settings so that you can ea
11. approximate For the power supply and Power Consumption refer to the label attached to the product Xx Open Source License Notice To send inquiries and requests regarding open sources contact Samsung via Email oss request samsung com 24 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Area Contact Centre Web Site Asia Pacific AUSTRALIA 1300 362 603 www samsung com au support NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com nz support CHINA 400 810 5858 www samsung com cn support HONG KONG 852 3698 4698 www samsung com hk support Chinese www samsung com hk_en support English 1800 3000 8282 Toll Free INDIA 1800 266 8282 Toll Free www samsung com in support 30308282 Non Toll Free INDONESIA papi www samsung com id support JAPAN 0120 327 527 www samsung com jp support JALAYSIA 800 88 9999 www samsung com my support 800 10 7267864 PLDT PHILIPPINES 800 8 7267864 Globe landline and Mobile www samsung com ph support 02 4222111 Other landline SINGAPORE 800 SAMSUNG 726 7864 www samsung com sg support THAILAND 0 2689 9232 www samsung com th support 800 29 3232 TAIWAN 0800 32 9999 www samsung com tw support VIETNAM 800 588 889 www samsung com n support MENA UA
12. control 2 SW 0 appears on the display 3 Press lt or gt button on the LEVEL key if you want to increase or decrease the subwoofer volume You can set it from SW 6 to SW 6 cl Using the AUTO POWER LINK function sss If you connect the main unit to a TV with a digital optical cable set the Auto Power function ON to have the Soundbar turn on automatically when you turn ay the TV on Press the AUTO POWER button on the Soundbar remote to turn the AUTO SOURCE KALA SPEAKER TV SOURCE POWER function on and off e The Auto power function turns on and off each time you press AUTO SoundConnect POWER AUTO POWER LINK Display ON POWER LINK ON S OFF POWER LINK OFF Q O Ka n Q Z This function is available only when Anynet HDMI CEC is turned off Using the AUDIO SYNC function TVCH AUDIO SYNC Video may appear out of synch with the audio if the Soundbar is connected to H a digital TV If this occurs adjust the audio delay time to match the video Press AUDIO SYNC on the remote control of this unit e You can use the buttons to set the audio delay time between O ms and 300 ms NG In USB mode TV mode or BT mode the Audio Sync function may not work Using the TONE function Press TONE on the Soundbar remote e Each time the button is pressed the selection changes as follows TREBLE BASS Press the VOL or VOL button to increase or decrease t
13. d no part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd WHAT S INCLUDED Check for the supplied accessories shown below Na Holder screw 2EA Wall Mount L 1EA Screw 2EA Wall Mount R 1EA Remote Control Batteries AAA size User Manual Wall Mount Guide Screws Bracket Wall Mount ul un Power Cord Adapter Aux Cable USB Cable U NG The appearance of the accessories may differ slightly from the illustrations above Use the dedicated USB cable to connect external USB devices to the unit descriptions FRONT PANEL a SNOILdIH0530 1 POWER BUTTON Turns the Wireless Audio Soundbar on and off Selects the D IN AUX HDMI BT TV USB input FUNCTION While the Soundbar is on pressing the F button for more than 2 BUTTON 3 seconds sets the button to act as a MUTE button To cancel MUTE button setup press the F button for more than 3 seconds again Controls the volume level 3 VOLUME m The numeric value of the volume level appears in the front panel display 4 REMOTE CONTROL The remote control can operate Soundbars made by SAMSUNG SENSOR only Displays the current mode If there is no input from the product or remote control for 15 5 DISPLAY seconds the display will turn off automatically The display will not turn off automatica
14. digital video and audio data with just a single connector HDMI OUT ARC e The ARC function allows digital audio to output via the HDMI OUT ARC port It can be enabled only when the Soundbar is connected to a TV that supports the ARC function e Anynet must be turned on UI This function is not available if the HDMI cable does not support ARC 13 connections CONNECTING AN EXTERNAL DEVICE USING AUDIO ANALOG CABLE OR OPTICAL DIGITAL CABLE This unit comes equipped with one optical in digital jack and one audio analog in jack giving you two ways to connect it to a TV AUXIN OPTICALIN OU cm Audio Cable Optical Cable not supplied or AUDIO OPTICAL OUT 5 7a OUT mr O He BD DVD player C Ba aa Set top box Game console AUX IN Connect AUX IN Audio on the main unit to the AUDIO OUT of the TV or Source Device Be sure to match connector Colours or OPTICAL IN Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device U 4 Do not connect the power cord of this product or your TV to the wall outlet until all connections between components are complete Before moving or installing this product be sure to turn off the power and disconnect the power cord 14 functions INPUT MODE You can select D IN AUX HDMI BT TV input or USB Press an appropriate button on the remote control to select a desired mode or press F to select
15. fiers or other equipment which may become hot This unit is designed for continuous use To fully turn off the unit disconnect the AC plug from the wall outlet Unplug the unit if you intend to leave it unused for a long period of time During thunderstorms disconnect the AC plug from the wall outlet Voltage peaks due to lightning could damage the unit Protect the product from moisture i e vases spills and excess heat e g fire radiators or equipment creating strong magnetic or electric fields Disconnect the power cable from the AC supply if the unit malfunc ions Your product is not intended for industrial use This product is for personal use only Condensation may occur if your product has been stored in cold temper atures If transporting the unit during the winter wait approximately 2 hours until the unit has reached room temperature before using Do not expose the unit to direct sunlight or other heat sources This could lead to overheating and cause the unit to malfunction The batteries used with this product contain chemicals that are harmful to he environment Do not dispose of batteries in the general household trash Do not dispose of batteries in a fire Do not short circuit disassemble or overheat
16. g transmitting system of the Bluetooth device or the Soundbar Itis subject to electrical variation from obstructions caused by a wall corner or office partition lt is exposed to electrical interference from same frequency band devices including medical equipment microwave ovens and wireless LANs e Pair the Soundbar with the Bluetooth device while they are close together e The further the distance is between Soundbar and Bluetooth device the worse the quality is If the distance exceeds the Bluetooth operational range the connection is lost e In poor reception sensitivity areas the Bluetooth connection may not work properly e The Bluetooth connection only works when it is close to the set The connection will be automatically cut off if the Bluetooth device is out of range Even within range the sound quality may be degraded by obstacles such as walls or doors e This wireless device may cause electric interference during its operation 15 functions 16 To connect the Soundbar to a Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function Connect a p o Bluetooth device 1 Press the SOURCE button on the remote control of the Soundbar to display the BT message e You will see BT READY on the front display of the Soundbar 2 On the Bluetooth device you want to connect open the Bluetooth menu Refer to the Bluetooth device s user manual
17. he Treble or Bass volume You can set the Tone setting for each from 3 to 3 SOURCE POWER SPEAKER TV SOURCE SPEAKER button CI amp PER SoundConnect the TV and Soundbar are connected via HDMI this button lets you Cc select between listening to audio through your TV or through the Soundbar Press SPEAKER on the remote control of this unit AUDIO MODE SPEAKER Scroll Display Display TV TV SPEAKER TV SPK HOMIIN Soundbar AVR SPEAKER HDMI ARC TV TV SPEAKER S MUTE Soundbar AVR SPEAKER TV ARC 21 functions Gila Using the Anynet HDMI CEC function Anynet lets you to control other Samsung Devices with your Samsung TV s remote control The Anynet function turns on and off each time you press Anynet 1 Connect the product to a Samsung TV with an the HDMI cable See page 13 2 Set the Anynet function on your TV and the Soundbar to ON See the TV instruction manual for more information KN Depending on your TV certain HDMI output resolutions may not work FONE function SOURCE POWER SPEAKER TV SOURCE Using the TV functions with Samsung TVs only E Sounnicanmect e Press TV SOURCE on the remote control to change the TV s input source e Press TV INFO on the remote control to display the TV channel information e Press TV CH on the remote control to select the TV channel e Press TV VOL on the remote control to increase or decrease the volume TV VOL TVCH AUD
18. he left right channels are reversed e Are the left right audio output cables from the TV connected properly e Check the left right channel and connect it them correctly The SoundConnect TV pairing failed e Does your TV support SoundConnect e Is your TV firmware the latest version e Does an error occur when connecting e Reset the TV MODE and connect again e SoundConnect is supported by some Samsung TVs released after 2012 Check your TV to see if it supports SoundConnect e Update your TV with the latest firmware e Contact the Samsung call center e Press the PII button for 5 seconds to reset the product 23 aooencix SPECIFICATIONS Model name HW H560 GENERAL AMPLIFIER USB 5V 0 5A Main unit 2 2 kg Weight Subwoofer 7 5 kg Dimensions Main unit 943 x 55 x 59 9 mm WxHxD Subwoofer 290 x 370 x 290 mm Operating temperature range 5 C to 35 C Operating humidity range 10 to 75 Rated output Main unit 80W CH 3OHM THD 10 1kHz power Subwoofer S N ratio Analogue input Separation 1kHz 160W 4OHM THD 10 100Hz 65 dB 65 dB S N ratio distortion separation and usable sensitivity are based on measurement using AES Audio Engineering Society guidelines Nominal specification Samsung Electronics Co Ltd reserves the right to change the specifications without notice Weight and dimensions are
19. is tumed on If the LINK indicator does not light when the main unit and subwoofer are tumed on please set the ID by following the procedure below 1 Plug the power cords of the main unit and subwoofer into an AC wall outlet 2 Press the ID SET button on the back of the subwoofer with a small pointed object for 5 seconds e The STANDBY indicator is turned off and the LINK indicator Blue LED blinks quickly SAMSUNG STANDBY LINK 3 While the main unit is powered off STANDBY mode press MUTE on the remote control for 5 seconds pE SOUND EFFECT SMART VOLUME VOL 4 The ID SET message appears on the main unit s OLED display 5 To Finalise the link turn the main unit s power on while the subwoofer s LINK LED blinks e The main unit and the subwoofer are now linked connected e The LINK indicator blue LED on the subwoofer is turned on e You can enjoy better sound from the wireless subwoofer by selecting a sound effect See page 20 Y L Before moving or installing the product be sure to turn off the power and disconnect the power cord f the main unit is powered off the wireless subwoofer will be in the standby mode and the STANDBY LED on the upper side will come on after the LINK indicator Blue LED blinks for 30 seconds f you use a device that uses the same frequency 2 4GHz near the system interference may cause some sound interruption The maximum wireless signal transmission di
20. l only e For the installation avoid a location with high temperature or humidity or a wall that cannot sustain the weight of the set Check the strength of the wall If the wall is not strong enough to support the unit reinforce the wall or install the unit on a different wall that can support the unit s weight e Purchase and use the fixing screws or anchors appropriate for the kind of wall you have plaster board iron board wood etc If possible fix the support screws into wall studs e Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on e Diameter M5 e Length 1 3 8 in 35 mm or longer recommended e Connect cables from the unit to external devices before you install it on the wall e Make sure the unit is turned off and unplugged before you install it Otherwise it may a cause an electric shock to inches 5 cm or more ey 1 Place the installation guide against the wall surface e The installation guide must be placed parallel to the wall e Installation should be done at least 2 inches 5 cm below the TV 2 Mark the location where the screws will go through on the wall using a pen and then remove the installation guide 3 Fasten the wall mount and screw to the marked location e The left and right mounts are different shapes 4 Secure the two holder screws to the screw holes on the back of the Soundbar s
21. lly in the BT READY SEARCH TV REQUEST or USB PLAYING modes g When you turn on this unit there will be a 4 to 5 second delay before it produces sound f you want to enjoy the sound only from the Wireless Audio Soundbar you must turn off the TV s speakers in the Audio Setup menu of your TV Refer to the owner s manual supplied with your TV descriptions REAR PANEL 1 Connect the AC adaptor s power cord to the AC power supply POWER SUPPLY ka 1 IN 2 Connect the AC power adaptor s mini plug to Power Supply In on the unit 3 Comnect the AC adapter s power cord to a wall outlet Connect USB devices such as MP3 players here to the play files Fa on the devices 2 VSS PORI Use the supplied USB cable if you have installed the product on a wall 3 AUX IN Connect to the Analog output of an external device 4 HDMI IN JACK Inputs digital video and audio signals simultaneously from an external source using an HDMI cable 5 OPTICAL IN Connect to the digital optical output of an external device 6 HDMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable 1 When disconnecting the power cable of the AC power adaptor from a wall outlet pull the plug Do not pull the cable Do not connect this unit or other components to an AC outlet until all connections between components are complete remote control TOUR OF THE REMOT
22. main body one on the left and one on the right 5 Insert the USB cable into the unit before installing it on the wall vv ar 6 Set the holder screws on the back of the Soundbar into the NI grooves of the wall mount Using palag with Wall Mount For safe installation make sure to push the holder screws all the J way to the bottom of the grooves 6 D O Wall Mounting the Soundbar 10 Detaching the Wall Mount 1 Pull the Soundbar upwards as shown in the figure to separate it from the wall haaa mount Using the Soundbar with Wall Mount Ja T ol Detaching the Soundbar from the Wall Mount 6G Do not hang onto the installed unit and avoid any impact to the unit Secure the unit firmly to the wall so that it does not fall off If the unit falls off it may cause an injury or damage the product When the unit is installed on a wall please make sure that children do not pull any of the connecting cables as it may cause it to fall For the optimal performance of a wall mount installation install the speaker system at least 2 inches 5 cm below the TV For your safety if you do not mount the unit on the wall install it on a secure flat surface where it is unlikely to fall 11 SNOILOANNOO connections CONNECTING THE WIRELESS SUBWOOFER The Subwoofer s linking ID is preset at the factory and the main unit and subwoofer should link connect wirelessly automatically when the main unit
23. play the TV s audio when it is set to SoundConnect mode and paired with the TV e Ifyou change to another mode other than TV mode or turn off the Soundbar you will hear audio from the TV s speakers again Connecting the Soundbar to a Bluetooth Compatible Samsung TV e e Connect iw 1 Turn on the Samsung TV and Soundbar 2 Set Add New Device in the TV s SoundConnect Setting menu to On e Depending on your TV the TV s Setting menu may have a SoundShare menu item instead of a SoundConnect menu item 3 Press the FE button to change the mode of the Soundbar to TV A message asking whether to proceed with Bluetooth pairing and Samsung Soundbar appears on the TV screen 4 Select lt Yes gt on the TV screen The TV pairs with the Soundbar 17 tunctions Once the pairing is established when you change the Soundbar to the TV mode from other input modes it will automatically connect to the TV e The Soundbar will play the TV s audio when it is connected to the TV e Changing the Soundbar from TV mode to any other mode will cancel the SoundConnect connection e f you want to cancel the existing pairing of the Soundbar to a TV and pair your Soundbar to a different TV Press the PLAY PAUSE button on the Soundbar for 5 seconds in the TV input mode to cancel the existing pairing You can now pair it to a different TV e n the SoundConnect mode you can control the volume and mute using either the TV remo
24. sappears e The Wireless Audio Soundbar connection is complete Before you connect a USB device Be aware of the following e If the file name of a folder on a USB device exceeds 10 characters it is not shown on the Soundbar s display e This product may not be compatible with certain types of USB storage media e The Soundbar supports the FAT16 and FAT32 file systems The NTFS file system is not supported 18 Connect USB devices directly to the USB port of the product Otherwise you may encounter a USB compatibility problem e Do not connect multiple storage devices to the product via a multi card reader It may not operate properly e Digital camera PTP protocols are not supported e Do not remove the USB device while it is being read e DRM protected music files MP3 WMA from a commercial web site will not be played e External HDDs are not supported e Mobile phone devices are not supported e File Format Type Compatibility list x Format Codec Sampling Rate 2 MPEG 1 Layer2 mp3 MPEG 1 Layer3 o MPEG 2 Layer3 16KHz 48KHz o 5 Wave Format MSAudio1 nig Wave Format MSAudio2 a 16KHz 96KHz aac AAC LC HE AAC 24KHz 96KHz wav Ogg 066110 16KHz 48KHz Flac FLAC 1 1 0 FLAC 1 2 1 16KHz 96KHz USING THE REMOTE CONTROL Play Pause Stop During playback press the gt I W button e Press the BIN button to pause the file Pre
25. sily reset them after the upgrade Once upgrading the product software is completed turn off the product and then press and hold W button for a while to reset the product If the firmware fails to upgrade we recommend formatting the USB device in FAT16 and trying again For upgrading purposes do not format the USB drive in NTFS format because it is not a supported file system Depending on the manufacturer some USB devices may not be supported 22 troubleshooting Before requesting service please review the following Symptom The unit will not turn on e Is the power cord plugged into the outlet Remedy e Connect the power plug to the outlet A function does not work when the button is pressed e s there static electricity in the air e Disconnect the power plug and connect it again Sound is not produced e Is the unit properly connected to your TV e Is the Mute function on e Is the volume set to minimum e Connect it correctly e Press the Mute button to cancel the Mute function e Adjust the volume OSNILOOHSAIENOUL The Picture does not appear on a TV when the function is selected e Is the TV connected properly e Connect it correctly The remote control does not work e Are the batteries drained e s the distance between remote control and main unit too far e Replace with new batteries e Move closer to the unit The sound from t
26. ss the BP Il button again to play the file e To stop playback press the Stop El button during playback Skip Forward Back During playback press the 14G PBI button TVMUTE TVINFO TV PRE CH TV EXIT e When there is more than one file on a USB device and you press the gt gt I O button the next file is selected Co C e When there is more than one file on a USB device and you press the l4 a SMART VOLUME button the previous file is selected SoundConnect Using the REPEAT function am Repeat playback allows you to repeatedly play a file repeat all randomly play files or turn Repeat off Press the REPEAT button e REPEAT OFF Cancels Repeat Playback e REPEAT FILE Plays the same file repeatedly e REPEAT ALL Plays all tracks in order repeatedly e REPEAT RANDOM Plays tracks in random order A track that has already been played may be played again NG You can set the REPEAT function while playing back music from a USB drive 19 functions SOUND EFFECT SMART VOLUME OL wT ay ww 20 Muting the sound This is useful when answering a doorbell or telephone call 1 To mute the sound of this unit press the MUTE button on the remote control 2 To mute the TV press the TV MUTE 07 button on the remote control 3 Press MUTE TV MUTE 0 on the remote control again or press VOLUME to restore the sound Using the SURROUND SOUND function The Surround Sound fea
27. stance between the main unit and subwoofer is about 33 ft but may vary depending on your operating environment If a steel concrete or metallic wall is between the main unit and the wireless subwoofer the system may not operate at all because the wireless signal cannot penetrate metal f the main unit doesn t make a wireless connection follow steps 1 5 above to retry the connection between the main unit and wireless subwoofer D The wireless receiving antenna is built into the wireless subwoofer Keep the unit away from water and moisture For optimal listening performance make sure that the area around the wireless subwoofer location is clear of any obstructions 12 CONNECTING AN EXTERNAL DEVICE USING HDMI CABLE HDMI is the standard digital interface for connecting to such devices as a TVs projectors DVD players Blu ray players set top boxes and more HDMI removes any loss of signal from analog conversion enabling you to enjoy video and audio sound quality as it was originally created in the digital source SNOILOANNOO HDMI Cable a ll Digital Devices HDMI OUT HDMI IN HDMI IN Connect an HDMI cable not supplied from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device and HDMI OUT HDMI e Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV KL 4 HDMI is an interface that transmits
28. te or the Soundbar remote TV SoundConnect operation range recommended pairing range within 20 inches within 50cm recommended operation range within 16 25 ft 6m lf the distance between the Soundbar and Samsung TV is over 16 25 ft 6m the connection or the sound can be cut off If this occurs connect to the Samsung TV again within the operational range Make sure the Samsung TV s SoundConnect mode is on before you use this function The PLAY NEXT PREV STOP buttons will not work in the SoundConnect mode Bluetooth Power On function The Soundbar will be powered on automatically when you turn the TV on if you connected the TV and Soundbar with the SoundConnect function You can toggle this function On Off by pressing and holding the SOURCE button on the Soundbar remote for more than 5 seconds when the Soundbar is powered off If set to Off the product turns off automatically when the TV turns off but it does not turn on automatically This feature is supported by TVs released beginning in 2013 The SoundConnect feature is supported by select models released from 2012 Check whether your TV supports SoundConnect SoundShare before you begin For more information refer to the user s guide of your TV USB 1 Connect the USB device to the USB port on the side of the unit 2 Press the F button on the front panel of the Soundbar repeatedly until USB appears 3 USB appears on the display screen and then di
29. the batteries Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Contents FEATURES SAFETY INFORMATION GETTING STARTED DESCRIPTIONS REMOTE CONTROL CONNECTIONS FUNCTIONS TROUBLESHOOTING APPENDIX 10 12 13 15 15 17 18 19 22 23 24 Features License Safety warnings Precautions Before reading the User s Manual What s included Front Panel Rear Panel Tour of the Remote Control Installing the Wall Mount Connecting the Wireless Subwoofer Connecting an external device using HDMI cable Connecting an external device using Audio Analog cable or Optical Digital cable Input Mode Bluetooth SoundConnect USB Using the Remote Control Software Upgrade Troubleshooting Specifications getting started BEFORE READING THE USER S MANUAL Note the following terms before reading the user manual Icons used in this manual Icon Term Definition A Indicates a situation where a function does not operate or settings may be Caution cancelled 4 Note Indicates tips or instructions on the page that help you operate a function Safety Instructions and Troubleshooting 1 Be sure to familiarize yourself with the Safety Instructions before using this product See page 3 2 If a problem occurs check Troubleshooting See page 23 Copyright 2014 Samsung Electronics Co Ltd All rights reserve
30. ture adds depth and spaciousness to the sound Press Surr Sound on the remote control e Each time the button is pressed the selection changes as follows SURROUND SOUND AUTO SURROUND SOUND ON SURROUND SOUND OFF LK When you turn on Surround Sound the Smart Volume and Sound Effect functions automatically change to OFF Using the SMART VOLUME function This will regulate and stabilize the volume level against a drastic volume change caused by a channel change or scene transition Press SMART VOLUME on the remote control e Each time the button is pressed the selection changes as follows SMART VOLUME ON m SMART VOLUME OFF LK When you turn on Smart Volume the Surround Sound and Sound Effect function automatically change to OFF Using the SOUND EFFECT function You can select from 5 different sound modes MUSIC VOICE SPORTS CINEMA and STANDARD depending on the type of sources you want to enjoy Press SOUND EFFECT on the remote control e Select the STANDARD mode if you want to enjoy the original sound K We recommend that you select a Sound Effect based on the source material and your personal taste When you choose a Sound Effect mode except STANDARD the Surround Sound and Smart Volume functions are automatically set to OFF Using the S W LEVEL function You can control the base volume with the S W Level button on the remote control 1 Press the S W LEVEL button on the remote
31. vice again The Soundbar may not run the Bluetooth Search or Connection functions properly in the following cases lf there is a strong electrical field around the Soundbar If several Bluetooth devices are simultaneously paired with the Soundbar lf the Bluetooth device is turned off not in place or malfunctions Note that such devices as microwave ovens wireless LAN adaptors fluorescent lights and gas stoves use the same frequency range as the Bluetooth device which can cause electric interference Once paired the device on ARC DIN USB HDMI AUX mode select Samsung Soundbar from the list will automatically change to BT mode To disconnect the Bluetooth device from the Soundbar You can disconnect the Bluetooth device from the Soundbar For instructions see the Bluetooth device s user manual e The Soundbar will be disconnected e When the Soundbar is disconnected from the Bluetooth device the Soundbar will display BT DISCONNECTED on the front display To disconnect the Soundbar from the Bluetooth device Press the F button on the front panel of the Soundbar to switch from BT to another mode or turn off the Soundbar e The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before terminating the connection Disconnection time may differ depending on the Bluetooth device e The currently connected device will be disconnected K In Bluetooth connection
Download Pdf Manuals
Related Search