Samsung Soundbar F850 Manual de Usuario
Contents
1. HDMI Cable e The ARC function allows digital audio to output via the HDMI OUT ARC port It can be enabled only when the Air Track is connected to a TV that supports the ARC function e Anynet must be turned on K This function is not available if the HDMI cable does not support ARC The ARC function is activated in D IN mode if you have connected the unit to a TV that supports ARC To turn off the ARC function turn Anynet off 15 functions NFC Connect your NFC compatible device via Bluetooth to the Air Track using this simple set up procedure and play music on the device through the Air Track 1 Turn on the NFC function on the device and make sure the screen lock function on the device is off The device s NFC function will not work if screen lock is on 2 Gently touch the NFC logo on the front of the Air Track with the NFC supported device 3 A pop up asking whether to proceed with the Bluetooth connection appears on the device Select lt Yes gt e When the connection is complete the connected message appears 4 To disconnect the NFC device gently touch the device to the NFC logo on the front of the Air Track again To connect another NFC device while the first device is still connected touch the device to the NFC logo on the front of the Air Track The Air Track will disconnect the first device and connect the second device Warning NFC pairing2. You can set the REPEAT function during music playback from a USB drive Muting the sound This is useful when answering a doorbell or telephone call 1 To mute the sound of this unit press the MUTE 0 button on the remote control 2 To mute the TV press the TV MUTE button on the remote control 3 Press MUTE 0 TV MUTE on the remote control again or press VOLUME E E to restore the sound Using the TONE function Press TONE on the remote control e Each time the button is pressed the selection changes as follows TREBLE MIDDLE BASS K Use the VOL button to adjust the setting to 6 6 Using the 3D SOUND PLUS function The 3D Sound Plus feature adds depth and spaciousness to the sound Press 83D SOUND PLUS on the remote control e Each time the button is pressed the selection changes as follows 3D SOUND PLUS OFF 3D SOUND PLUS MUSIC 3D SOUND PLUS MOVIE When you turn on 3D Sound Plus the Sound Effect function will automatically change to STANDARD 21 SNOILONNA functions fomo Using the SMART VOL function sss This will regulate and stabilize the volume level against a drastic volume H change caused by a channel change or scene transition sga Press SMART VOL on the remote control Sees e Each time the button is pressed the selection changes as follows wa SMART VOLUME ON SMART VOLUME OFF Using the S W LEVEL function You ca
3. Air Track and the Bluetooth device exceeds 16 25 ft 5m lf the Bluetooth device comes back into the effective range after disconnecting you can restart the Air Track to restore the pairing with the Bluetooth device The Air Track automatically turns off after 20 minutes in the Ready state SOUNDSHARE This section explains how to connect the Crystal Surround Air Track to a Bluetooth compatible SAMSUNG TV To connect the Crystal Surround Air Track to a Bluetooth compatible Samsung TV TV cece 5 Connect SNOILONNA select the TV mode and then connect the TV to the Crystal Surround Air Track e The unit will play the TV s audio when it is connected to the TV e f you change to another mode except the TV SoundShare mode or turn off the Air Track you will hear audio from the TV again lt To pair to your TV gt To produce TV sound on your Air Track via a Bluetooth connection you need to pair your system to the Bluetooth compliant TV first Once the pairing is established the pairing information is recorded and kept and no further Bluetooth connection message will appear Bring the Air Track and the TV close together before pairing 1 Turn on the Samsung TV and Air Track e Set Add New Device in the TV s SoundShare Setting menu to On 2 When you change the mode of the Air Track to TV a message asking whether to proceed with Bluetooth pairing is displayed Samsung AirTrack appears o
4. Apart of your body is in contact with the receiving transmitting system of the Bluetooth device or the Air Track It is subject to electrical variation from obstructions caused by a wall corner or office partition It is exposed to electrical interference from same frequency band devices including medical equipment microwave ovens and wireless LANs SNOILONNA e Pair the Air Track with the Bluetooth device while they are close together e The further the distance between the Air Track and Bluetooth device the worse the quality is If the distance exceeds the Bluetooth operational range the connection is lost e In poor reception sensitivity areas the Bluetooth connection may not work properly e The Bluetooth connection only works when it is close to the unit The connection will be automatically cut off if the Bluetooth device is out of range Even within range the sound quality may be degraded by obstacles such as walls or doors e This wireless device may cause electric interference during its operation To connect the Air Track to a Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function Connect Bluetooth device 1 Press the BT button on the remote control of the Air Track to display the BT message e The message WAIT appears at the very first Bluetooth activation after powering on From the next activation BT READY will appear 2 Select
5. f the firmware fails to upgrade we recommend formatting the USB device in FAT16 and trying again For upgrading purposes do not format the USB drive in NTFS format because it is not a supported file system Depending on the manufacturer some USB devices may not be supported 24 troubdlesnooting Before requesting service please check the following Symptom The unit will not turn on A function does not work when the button is pressed Sound is not produced The Picture does not appear on a TV when the function is selected The remote control does not work The sound from the left right channels are reversed The SoundShare TV pairing failed e ls the power cord plugged into the outlet Is there static electricity in the air Is the unit properly connected to your TV Is the Mute function on Is the volume set to minimum Is the TV connected properly Are the batteries drained Is the distance between the remote control and main unit too far Are the left right audio output cables from the TV connected properly Does your TV support SoundShare Is your TV firmware the latest version Does an error occur when connecting Reset the TV MODE and connect again Remedy Connect the power plug to the outlet Disconnect the power plug and connect it again Connect it correctly YNILOOHSATENOUL Press the Mute button to cancel the function Adjus
6. a drastic volume change K SAT stands for Surround Air Track which is a Samsung s proprietary name The remote control can operate TVs made by SAMSUNG only Depending on the TV you are using you may not be able to operate your TV with this remote control If you can t operate the TV using the TV s remote control Installing Batteries in the Remote Control e Make sure to match the diagram inside the compartment e Assuming typical TV usage the batteries last for about one year bki and a ends of the batteries with the e You can use the remote control up to 23 feet 7 meters in a straight line from the unit You can also operate the remote at a horizontal angle of up to 30 from the remote control sensor Battery size AAA connections INSTALLING THE WALL MOUNT You can use the wall mount bracket to mount this unit on a wall Installation Precautions e Install on a vertical wall only e For the installation avoid a location with high temperature or humidity or a wall that cannot sustain the weight of the set Check the strength of the wall If the wall is not strong enough to support the unit reinforce the wall or install the unit on a different wall that can support the unit s weight Purchase and use the fixing screws or anchor appropriate for the kind of wall you have plaster board iron board wood etc If possible fix the support screws into wall studs Conn
7. in the general household trash Do not dispose of batteries in a fire Do not short circuit disassemble or overheat the batteries Danger of explosion if battery is incorrectly replaced e Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance e An administration fee may be charged if either a an engineer is called out at your request and there is no defect with the product i e where the user manual has not been read b you bring the unit to a repair centre and there is no defect with the product i e where the user manual has not been read e You will be informed of the administration fee amount before a technician visits contents FEATURES SAFETY INFORMATION GETTING STARTED DESCRIPTIONS REMOTE CONTROL CONNECTIONS FUNCTIONS TROUBLESHOOTING APPENDIX 10 11 12 12 12 13 14 14 15 15 16 17 19 20 21 24 26 Features Licence Safety warnings Precautions Before reading the user s manual What s included Front Bottom panel Rear Panel Tour of the remote control Installing the wall mount Connecting the wireless subwoofer Attaching the toroidal ferrite core to the power cord of the subwoofer Looping the power cable around the toroidal core Auto sound calibration ASC Connecting an external device using an HDMI cable Connecting an external device using Audio analogue cable or Optical dig
8. samsung com es support SWEDEN 0771 726 7864 SAMSUNG www samsung com se support www samsung com ch support 0848 726 78 64 German ene 0848 SAMSUNG www samsung com ch_fr support French U K 0330 SAMSUNG 7267864 www samsung com uk support EIRE www samsung com ie support LITHUANIA www samsung com It support LATVIA www samsung com v support ESTONIA www samsung com ee support Correct Disposal of This Product X Waste Electrical amp Electronic Equipment E Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal
9. wall install it on a secure flat surface where it is unlikely to fall 10 CONNECTING THE WIRELESS SUBWOOFER The Subwoofer s linking ID is preset at the factory and the main unit and subwoofer should link connect wirelessly automatically when the main unit and subwoofer are turned on If the LINK indicator does not light when the main unit and subwoofer are turned on please set the ID by following the procedure below Complete this process within 30 seconds after the Link Indicator on the subwoofer starts blinking 1 Plug the power cords of the main unit and subwoofer into an AC wall outlet 2 Confirm that the main unit is off in STANDBY Mode 3 Press the ID SET button on the back of the subwoofer with a small pointed object for 5 seconds e The LINK INDICATOR Blue LED on the subwoofer blinks quickly SNOILOANNOO STAND BY LINK 4 While the main unit is powered off in STANDBY mode press and hold the MUTE o on the remote control for 5 seconds 5 The ID SET message appears on the main unit s OLED display 6 To finalise the link turn the main unit s power on while the subwoofer s LINK LED blinks e The main unit and the subwoofer should now be linked connected e The LINK indicator blue LED on the subwoofer should be turned on and solid blue e f the LINK indicator is not solid blue the linking process has failed Turn off the main unit and start again from Ste
10. Audio Cable a TV mmm O E or OPTICAL IN Aar gt O m ame Q 522p Optical Cable console not supplied AUX IN Connect AUX IN Audio on the main unit to the AUDIO OUT of the TV or Source Device Be sure to match connector colours or OPTICAL IN Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device Do not connect the power cord of this product or your TV to the wall outlet until all connections between components are complete Before moving or installing this product be sure to turn off the power and disconnect the power cord ASSEMBLING THE CABLE CLIP Attach the cable clip to the unit as shown and then run the cables through the clip to keep them neat 14 functions INPUT MODE You can select D IN AUX HDMI BT TV input or USB input D IN AUX HDMI BT TV or USB mode Input mode Display E Optical Digital input D IN z AUX input AUX HDMI input HDMI F BLUETOOTH mode BT TV mode TV USB mode USB The unit turns off automatically in the following situations e BI TV USB HDMI ARC D IN MODE f there is no audio signal for 20 minutes e AUX Mode If there is no KEY input for 8 hours when the AUX cable is connected If the AUX cable is disconnected for 20 minutes K Use the provided cable if you cannot connect a USB flash memory device directly to the unit ARC HDMI OUT
11. DMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable AUX IN Connect to the Analogue output of an external device OPTICAL IN Connect to the digital optical output of an external device POWER SUPPLY Connect the AC power adaptor jack to the power supply jack and IN then connect the AC power adaptor plug to a wall outlet ASC IN JACK Used to connect the ASC Microphone l When disconnecting the power cable of the AC power adaptor from the wall outlet pull the plug Do not pull the cable Do not connect this unit or other components to an AC outlet until all connections between components are complete gt a N remote contro TOUR OF THE REMOTE CONTROL Turns the remote s backlight for 5 seconds Turns the Crystal Surround Air Track on and off Press to select a connected SAT source SAT Surround Air Track Selects the Sound Effect MUSIC NEWS DRAMA CINEMA SPORTS GAME This feature adds depth and spaciousness to the sound Cencells the selected Sound Effect and switches to the standard mode displays STANDARD for the current Sound Effect Press to skip backwards or forwards Adjusts the Subwoofer level Adjusts the volume level of the unit Displays the current TV status Switches between the available TV channels Adjusts the TV volume level You can control the brightness of the VACUUM TUBE AMP s display You can use this f
12. HW F850 imagine the possibilities Thank you for purchasing this Samsung product To receive a more complete service please register your product at www samsung com register a features SoundShare SoundShare produces TV sound on your SAT via a Bluetooth connection and controls the sound HDMI HDMI transmits video and audio signals simultaneously and provides a clearer picture The unit is also equipped with the ARC function which lets you listen to sound from your TV via an HDMI cable through the Crystal Surround Air Track This function is only available if you connect the unit to an ARC compliant TV 3D Sound Plus The 3D SOUND PLUS feature adds depth and spaciousness to your listening experience Wireless Subwoofer Samsunqg s wireless module does away with cables running between the main unit and the subwoofer Instead the subwoofer connects to a compact wireless module that communicates with the main unit Special Sound mode You can select from 7 different sound modes MUSIC NEWS DRAMA CINEMA SPORTS GAME and STANDARD Original Sound depending on the type of content you want to enjoy Multi function Remote Control The supplied remote control can be used to control the TV connected to this unit Works only for Samsung TVs The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button Active Speaker System This unit features an Active Speak
13. URG 261 03 710 www samsung com support pa Applicable in countries with separate collection systems Correct disposal of batteries in this product This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system Web Site Country Contact Centre MONTENEGRO 020 405 888 www samsung com support 080 697 267 SLOVENIA 090 726 786 www samsung com si support 0900 SAMSUNG 0900 7267864 NETHERLANDS 0 10 Min www samsung com nl support NORWAY www samsung com no support 0 801 172 678 lub 48 22 607 93 33 catkowity koszt potaczenia jak za POLAND 1 impuls wedtug taryfy operatora www samsung com pl support koszt po czenia wed ug taryfy operatora PORTUGAL 808 20 7267 www samsung com pt support ROMANIA a Sees ice www samsung com ro support SERBIA www samsung com rs support SLOVAKIA 0800 SAMSUNG 0800 726 786 www samsung com sk support SPAIN www
14. at the listening position insert the ASC Microphone plug into the ASC IN jack and then select the ASC mode by pressing the ASC button on the remote control K During the ASC calibration no other buttons work except the power button ASC will abort with an error if you change the set s position in the middle of the ASC calibration 12 CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE HDMI is the standard digital interface for connecting to such devices as a TVs projectors DVD players Blu ray players set top boxes and more Because HDMI transmits the highest quality digital signal you can enjoy superior video and audio as it was originally created at the digital source Z m HDMI OUT S HDMI Cable Digital Devices 5 TV O RE Tam m HDMI IN lt HDMI Cable HDMI IN Connect an HDMI cable not supplied from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital devices and HDMI OUT HDMI Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV HDMI transmits digital video and audio signals through a single cable 13 SNOILOANNOO connections CONNECTING AN EXTERNAL DEVICE USING AUDIO ANALOGUE CABLE OR OPTICAL DIGITAL CABLE This unit comes equipped with one optical in digital jack and one audio analogue in jack giving you two ways to connect it to a TV
15. cable to connect external USB devices to the unit descnotions FRONT BOTTOM PANEL VOLUME VACUUM NFCTAG i TUBE AMP eeeee Ss Cee Ce a le eo eocce SNOILdIHWOSAG eeccccce 7 Displays the current mode lf there is no input from the product or remote control for 15 DISPLAY seconds the display will turn off automatically The display will not turn off automatically in BT READY TV READY and USB Playing modes Connect USB devices such as MP3 players here to play files on the USB PORT devices POWER BUTTON Turns the Crystal Surround Air Track on and off Selects the D IN AUX HDMI BT TV USB input FUNCTION While the unit is powered on pressing the button for more than BUTTON 3 seconds converts the button to the MUTE 0 button To cancel MUTE 07 button setup press the F button for more than 3 seconds again K When you turn on this unit there will be a 4 to 5 second delay before it produces sound Do not bring cellular phones or mobile devices near the vacuum tube amp or put other electronic devices on the top of the product Signals from these devices can cause noise or distortion in the audio Do not let children touch the product s surface when the set is on It will be hot s e Ny amp descnotions REAR PANEL Receives digital video and audio signals simultaneously from an external source using an HDMI cable HDMI IN JACK H
16. ce with the essential requirements and other relevant provisions of Directive 1999 5 EC The original Declaration of Conformity may be found at htto www samsung com go to Support gt Search Product Support and enter the model name This equipment may be operated in all EU countries 26 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care Centre Country Contact Centre 0800 SAMSUNG 0800 AUSTRIA 7967864 www samsung com at support www samsung com be support BELGIUM 02 201 24 18 Se www samsung com be_fr support French BOSNIA www samsung com support BULGARIA www samsung com bg support CROATIA www samsung com hr support CZECH www samsung com cz support DENMARK 70 70 19 70 www samsung com dk support FINLAND 030 6227 515 www samsung com fi support FRANCE 01 48 63 00 00 www samsung com fr support 0180 6 SAMSUNG bzw 0180 6 7267864 Web Site GERMANY 0 20 Anruf aus dem dt Festnetz aus dem Mobilfunk max 0 60 Anruf 8009 4000 only from landline toll free 80111 SAMSUNG 80111 726 7864 only from land line 30 210 6897691 from mobile and land line www samsung com de support CYPRUS www samsung com gr support GREECE HUNGARY O680SAMSUNG 0680 726 786 http www samsung com hu O680PREMIUM 0680 773 648 support ITALIA 800 SAMSUNG 800 7267864 www samsung com it support LUXEMB
17. ct a Sound Effect based on the source material and your personal taste When you choose a Sound Effect mode except STANDARD 3D Sound Plus will automatically be turned OFF Once ASC calibration is completed the ASC mode will be added MUSIC NEWS DRAMA CINEMA i SPORTS GAME 3D SOUND STANDARD SOFTWARE UPGRADE Samsung may offer upgrades for the Crystal Surround Air Track s l system firmware in the future If an upgrade is offered you can upgrade the firmware by connecting a USB drive with the firmware upgrade stored on it to the eg USB port on your Air Track Note that if there are multiple upgrade files you must load them onto the USB drive singly and use them to upgrade the firmware one at a time Please visit Samsung com or contact the Samsung call centre to receive more information about downloading upgrades files K Insert a USB drive containing the firmware upgrade into the USB port on the main unit Do not disconnect the power or remove the USB drive while upgrades are being applied The main unit will turn off automatically after completing the firmware upgrade When software is upgraded settings you have made will return to their default factory settings We recommend you write down your settings so that you can easily reset them after the upgrade Once the software upgrade is completed turn off the product and then press and hold the W button for a while to reset the product
18. ect cables from the unit to external devices before you install it on the wall Make sure the unit is turned off and unplugged before you install it Otherwise it may cause an electric shock Place the wall mount bracket on a wall surface and then secure it with two screws If you are hanging the unit below a TV be sure to install the wall mount bracket so that the arrow t is placed in the centre of the TV Also make sure the unit is at least two inches 5 cm below the TV oh 2 Align the two HOLDER SCREWs screw holders with the screw holes on the left and right sides of the MAIN UNIT and then fix them to the main unit with the supplied screws 3 Fit the unit into the corresponding slots of the wall mount bracket For secure installation make sure the mounting studs slide firmly down into the bottom of the slots 4 The installation is complete 2 inches 5 cm or more t K Do not hang onto the installed unit and avoid striking or dropping the unit Secure the unit firmly to the wall so that it does not fall off If the unit falls off it may cause an injury or damage the product When the unit is installed on a wall please make sure that children do not pull any of the connecting cables as it may cause it to fall For the optimal performance of a wall mount installation install the speaker system at least 2 inches 5 cm below the TV For your safety if you do not mount the unit on the
19. ee page 13 2 Set the Anynet function on your TV and the SAT to ON See the TV instruction manual for more information K Depending on your TV certain HDMI output resolutions may not work Please refer to the user s manual of your TV and check for the HDMI CEC Anynet function Using the TV functions with Samsung TVs only e Press TV SOURCE on the remote control to change the TV s input source e Press TV INFO on the remote control to display the TV channel information e Press TV CH on the remote control to select the TV channel e Press TV VOL on the remote control to increase or decrease the volume level e To exit the TV menu use the TV EXIT button It functions the same as the EXIT button of the TV remote control K When you press the SOUNDSHARE button the TV s sound is transmitted through the Air Track system via a Bluetooth connection The Air Track also controls the sound volume sound quality etc The remote control can operate TVs made by SAMSUNG only 23 functions foao Using the Sound Effect function sss You can select from 7 different sound modes MUSIC NEWS DRAMA oe CINEMA SPORTS GAME and STANDARD Original Sound depending on soe the type of sources you want to enjoy pues Press MUSIC NEWS DRAMA CINEMA SPORTS GAME on the remote oa control e Select the STANDARD mode if you want to enjoy the original sound K We recommend that you sele
20. er System that provides high sound quality in a single slim unit This unit does not require any satellite loudspeakers or speaker cabling which are normally associated with conventional surround sound systems USB Host support You can connect and play music files from external USB storage devices such as MP3 players USB flash memory etc using the Air Track s USB HOST function Bluetooth Function You can use connect a Bluetooth device to the SAT and enjoy music with high quality stereo sound all without wires NFC Connect your NFC compatible device via Bluetooth to the Air Track using this simple set up procedure and play music on the device through the Air Track LICENCE Q DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 2 0 Channel Manufactured under licence under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Channel is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved H mi The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries To send inquiries and requests regarding open sources contact Samsung via Email oss request sa
21. hen the Air Track is powered off If set to Off the product turns off automatically when the TV turns off but it does not turn on automatically This feature is supported by TVs released from 2013 on The SoundShare feature is supported by select models released from 2012 on Check whether your TV supports SoundShare before you begin For more information refer to the user s guide of your TV 19 functions USB Pood 3 USB appears on the display screen and then disappears e The Crystal Surround Air Track connection is complete e The SAT automatically turns off Auto Power Off if no USB device has been connected for more than 20 minutes Playback will stop if you change the unit s position while playing files from a USB device Before you connect a USB device Be aware of the following e lf the file name of a folder on a USB device exceeds 10 characters it is not displayed on the OLED e This product may not be compatible with certain tyoes of USB storage media e The Air Track supports the FAT16 and FAT22 file systems The NTFS file system is not supported e Connect USB devices directly to the USB port of the product Otherwise you may encounter a USB compatibility problem e Do not connect multiple storage devices to the product via a multi card reader It may not operate properly e Digital camera PTP protocols are not supported e Do not remove the USB device while it is bei
22. ital cable Assembling the cable clip Input mode ARC HDMI out NFC Bluetooth SoundShare USB Using the remote control Software upgrade Troubleshooting Specifications getting started BEFORE READING THE USER S MANUAL Note the following terms before reading the user manual Icons used in this manual Icon Definition f Indicates a situation where a function does not operate or settings may be Caution cancelled K Indicates tips or instructions on the page that help you operate a function Safety Instructions and Troubleshooting 1 Be sure to familiarize yourself with the Safety Instructions before using this product See page 3 2 Ifa problem occurs check Troubleshooting See page 25 Copyright 2013 Samsung Electronics Co Ltd All rights reserved no part of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd WHAT S INCLUDED Check for the supplied accessories shown below O20 T ane Q Holder screw 2EA a Fas E HE H A S28 Screw 2EA a NB ay lt Remote Control Bracket Wall User Manual Screw USB Cable Cable Cli Batteries AAA size Mount p For Subwoofer power cable 1EA idal ferrit Power Cord DC Adapter AUX Cable ASC Microphone i E K The appearance of the accessories may differ slightly from the illustrations above Use the dedicated USB
23. may not be successful if you do not place your NFC device on the Air Track correctly If you see an Empty tag error message on your mobile device you must gently touch your NFC device to the Air Track again and be sure you match the NFC location on your mobile device to the NFC logo on the Air Track exactly The NFC function is built into Android devices running Android OS 4 1 2 Jellybean or later lf your mobile device has Android OS 4 1 2 Jellybean or later it must also have an NFC tag to run the NFC function See the instructions of your device for details lf your device has an Android OS earlier than Android OS 4 1 2 Jellybean your device must have an NFC tag and you must download the Samsung NFC Connection application from Android market to run the NFC function The position of the NFC antenna differs on devices Check where the NFC antenna is located before connecting f your device is covered with a thick case the connection may not Succeed The N mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries 16 BLUETOOTH You can use a Bluetooth device to enjoy music with high quality stereo sound all without wires What is Bluetooth Bluetooth is a technology that enables Bluetooth compliant devices to interconnect easily with each other using a short wireless connection e A Bluetooth device may cause noise or malfunction depending on usage when
24. msung com safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury This symbol indicates important instructions accompanying the product CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT e This apparatus shall always be connected to a AC outlet with a protective grounding connection e To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable CAUTION e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times PRECAUTIONS Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product Install your product horizontally on a suitable base furnit
25. n control the base volume with the S W LEVEL button on the remote 3 control 1 Press an S W LEVEL button on the Remote control SW LEVEL 2 SW 0 appears on the display 3 Press amp or amp button on the LEVEL key if you want to increase or decrease the subwoofer volume You can set it from SW 6 to SW 6 Using the AUTO POWER LINK function The Crystal Surround Air Track is automatically turned on when you turn on the TV or any device connected to the Air Track with the optical cable Press AUTO POWER on the remote control of this unit e The Auto power link function turns on and off each time you press AUTO AUTO POWER POWER AUTO POWER LINK Display ON POWER LINK ON OFF POWER LINK OFF Ifa TV or any device connected to Air Track with the optical cable is off and there is no digital input the Air Track is turned off after 20 minutes These functions are available only when the Anynet HDMI CEC is turned off Using the AUDIO SYNC function ae el Lu Video may appear out of synch with the audio if the Air Track is connected to geil Merges a digital TV If this occurs adjust the audio delay time to match the video Press AUDIO SYNC B G on the remote control of this unit e You can use the GJ G buttons to set the audio delay time between O ms and 300 ms g In USB mode TV mode or BT mode the Audio Sync function may not work Using the DRC function This feature balances the ra
26. n the TV screen 3 Select lt Yes gt on the TV screen The pairing with the Air Track will be completed e Once the pairing is established when you change the Air Track to the TV mode from other input modes it will automatically connect to the TV Changing the Air Track from TV mode to any other mode will cancel the SoundShare connection If you want to cancel the existing pairing of the SAT to a TV and pair your SAT to a different TV Press the PLAY PAUSE button on the SAT for 5 seconds in the TV inout mode to cancel the existing pairing You can now pair it to a different TV In the SoundShare mode you can control the volume and mute using either the TV remote or the SAT remote TV SoundShare operation range recommended pairing range within 20 inches within 50cm recommended operation range within 16 25 ft 6m If the distance between the Air Track and Samsung TV is over 16 25 ft 5m the connection or the sound can be cut off If this occurs connect to the Bluetooth device again within the operational range Make sure the Samsung TV s SoundShare mode is on before you use this function The PLAY NEXT PREV STOP buttons will not work in the SoundShare mode Bluetooth Standby On function The Air Track will be powered on automatically when you turn the TV on if you connected the TV and Air Track with SoundShare function You can toggle this function On Off by pressing the SoundShare button for more than 5 seconds w
27. ng read e DRM protected music files MP3 WMA from a commercial web site will not be played e External HDDs are not supported e Mobile phone devices are not supported e File Format Type Compatibility list Format Codec MPEG 1 Layer2 mp3 MPEG 1 Layer3 MPEG 2 Layer3 Wave_Format_MSAudio1 we Wave_Format_MSAudio2 AAC aac AAC LC HE AAC wav Ogg OGG 1 1 0 Flac FLAC 1 1 0 FLAC 1 2 1 X Supporting Sampling Rate above 16KHz 20 USING THE REMOTE CONTROL SAMSUNG 3D SOUND Play Pause Stop During playback press the gt I E button e Press the gt II button again to stop playing the file temporarily Press the Il button to play the selected file e To stop playback press the Stop W button during playback Skip Forward Back During playback press the 4 gt gt I button e When there is more than one file and you press the gt gt I button the next file is selected e When there is more than one file and you press the k lt button the previous file is selected Using the REPEAT function Repeat playback allows you to repeatedly play a file repeat all randomly play files or turn Repeat off Press the REPEAT button e REPEAT OFF Cencells Repeat Playback e REPEAT FILE Repeat playing a track e REPEAT ALL Repeat playing all tracks e REPEAT RANDOM Plays tracks in random order A track that has already been played may be played again
28. nge between the loudest and quietest sounds You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night Press DRC on the remote control of this unit e Each time the button is pressed the selection changes as follows DRC STANDARD DRCMAX DRCMIN 22 SAMSUNG SMART VOL SPEAKER VCH iy TVINFO l V TV SOURCE Using the VT DIMMER function This feature controls the brightness of the VACUUM TUBE AMP Press VT DIMMER on the remote control of this unit e Each time the button is pressed the selection changes as follows VT DIMMER OFF VT DIMMER MIN VT DIMMER MAX The VI DIMMER does not function for 30 seconds when you turned on the product for the very first time SPEAKER button S If a TV and the Air Track are connected via HDMI this button lets you select 9 between listening to audio through your TV or through the Air Track O Press SPEAKER on the remote control of this unit o AUDIO MODE SPEAKER Scroll Display Display TV HDMI IN TV SPEAKER TV SPK Air Track AVR SPEAKER HDMI ARC TV TV SPEAKER S MUTE Air Track AVR SPEAKER TV ARC Using the Anynet HDMI CEC function Anynet is a function that enables you to control other Samsung Devices with your Samsung TV s remote control The Anynet function turns on and off each time you press Anynet 1 Connect the product to a Samsung TV with an HDMI cable S
29. not be restored automatically To reconnect you must pair the device again Search or connection may not be performed properly by Air Track in the following cases If there is a strong electrical field around the Air Track If several Bluetooth devices are simultaneously paired with Air Track lf the Bluetooth device is turned off not in place or malfunctions Note that such devices as microwave ovens wireless LAN adaptors fluorescent lights and gas stoves use the same frequency range as the Bluetooth device which can cause electric interference To disconnect the Bluetooth device from the Air Track You can disconnect the Bluetooth device from the Air Track For instructions see the Bluetooth device s user manual e The Air Track will be disconnected e When the Air Track is disconnected from the Bluetooth device the Air Track will display BT DISCONNECTED on the front display To disconnect the Air Track from the Bluetooth device essee Press the button on the front panel of the Air Track to switch from BT to another mode or turn off the Air Track e The connected Bluetooth device will wait a certain amount of time for a response from the Air Track before terminating the connection Disconnection time may differ depending on the Bluetooth device e The currently connected device will be disconnected K n Bluetooth connection mode the Bluetooth connection will be lost if the distance between the
30. p 2 e You can enjoy better sound from the wireless subwoofer by selecting the a sound effect See page 24 K Before moving or installing the product be sure to turn off the power and disconnect the power cord f the main unit is powered off the wireless subwoofer will be in the standby mode and the STANDBY LED on the upper side will come on after the LINK indicator Blue LED blinks for 30 seconds If you use a device that uses the same frequency 2 4GHz as the unit near the unit interference may cause some sound interruption The transmission distance of the wireless signal between the main unit and subwoofer is about 33 ft but may vary depending on your operating environment If a steel concrete or metallic wall is between the main unit and the wireless subwoofer the system may not operate at all because the wireless signal cannot penetrate metal Ifthe main unit doesn t make a wireless connection follow steps 1 5 above to retry the connection between the main unit and wireless subwoofer l The wireless receiving antenna is built into the wireless subwoofer Keep the unit away from water and moisture For optimal listening performance make sure that the area around the wireless subwoofer location is clear of any obstructions 11 connections ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE SUBWOOFER Attaching the Toroidal ferrite core to the power cord of the subwoofer helps p
31. revent RF interference from radio signals 1 Pull the fixing tab of the Toroidal ferrite core to open tt 2 Make two loops around the core with the power cable of the subwoofer See the illustration below 3 Attach the Toroidal ferrite core to the Subwoofer power cord as shown in the illustration below and then press it until it clicks Lift up to release the lock Make two loops around the core Close the lock and open the core with the power cable Start winding 5 to 10 cm 2 4 in away from the core AUTO SOUND CALIBRATION ASC The ASC function measures the distance between the Air Track main unit sub woofer and your listening position and calibrates the volume levels and frequency characteristics of the main unit and sub woofer to provide optimum sound 1 Place the ASC Microphone at the listening position e Please make sure to place the ASC mic on the actual listening point for precise adjustment 2 Connect the ASC Microphone to the ASC IN jack on the Air Track The Calibration starts automatically and takes about 2 minutes e f you turn off the Air Track or unplug the ASC microphone before the completion message appears on the display calibration will be cancelled and incomplete If this occurs plug the ASC microphone into the ASC IN jack again e After calibration has been completed the first time you can re run the calibration process Place the ASC microphone
32. t the volume Connect it correctly Replace with new batteries Move closer to the unit Check the left right channel and connect it them correctly SoundShare is supported by some Samsung TVs released after 2012 Check your TV to see if it Supports SoundShare Update your TV with the latest firmware Contact the Samsung call centre Press gt II button for 5 seconds to reset the product 25 AOQDeNAIx SPECIFICATIONS Model name HW F850 USB Main unit Weight 5V 0 5A 4 0 kg Subwoofer PS WF850 GENERAL Dimensions Main unit 10 5 kg 1182 x 126 x 57 mm WxHxD Subwoofer PS WF850 305 x 401 5 x 305 mm 5 C to 35 C Operating temperature range Operating humidity range Main Front Rated output power AMPLIFIER Subwoofer PS WF850 S N ratio analogue input Separation 1kHz Main Top 10 to 75 SOW CH 40HM THD 1 1kHz SOW CH 40HM THD 1 1kHz 150W 30HM THD 10 100Hz 65 dB 65 dB S N ratio distortion separation and usable sensitivity are based on measurement using AES Audio Engineering Society guidelines Nominal specification Samsung Electronics Co Ltd reserves the right to change the specifications without notice Weight and dimensions are approximate For the power supply and Power Consumption refer to the label attached to the product CE Hereby Samsung Electronics declares that this equipment is in complian
33. the Bluetooth menu on the Bluetooth device you want to connect Refer to the Bluetooth device s user manual 3 Select the Stereo headset menu on the Bluetooth device e You will see a list of scanned devices 4 Select Samsung AirTrack from the list e When the Air Track is connected to the Bluetooth device it will disolay BT CONNECTED BT on the front display e f the Bluetooth device has failed to pair with the Air Track delete the previous Samsung AirTrack found by the Bluetooth device and have it search for the Air Track again 5 Play music on the connected device e You can listen to the music playing on the connected Bluetooth device over the Crystal Surround Air Track system e In BT mode the Play Repeat Stop Next Prev functions are not available 17 functions 18 You may be required to enter a PIN code password when connecting the Bluetooth device to the Air Track If the PIN code input window appears enter lt 0000 gt The Air Track only supports Middle Quality SBC data up to 237kpps 48kKHz It does not support High Quality SBC data 828kbps 44 1kHZz The AVRCP feature is not supported Connect only to a Bluetooth device that supports the A2DP AV function You cannot connect to a Bluetooth device that supports only the HF Hands Free function Only one Bluetooth device can be paired at a time Once you have turned off Air Track and the pairing is disconnected the pairing will
34. unction to enjoy Dolby Digital sound when watching movies at low volume at night Standard MAX MIN Used to help sync video to audio when connected to a digital TV Anynet is a function that enables you to control other Samsung Devices with your Samsung TV s remote control e DIMMER TV CH I 3 REPEAT rAUDIO SYNC Aynee SMARTVOL SPEAKER I AUTO POWER AH59 02583A SAMSUT Turns your Samsung TV on and off This produces TV sound on your SAT via a Bluetooth connection and controls the sound Shortcut button for switching to custom sound mode saved by using the ASC function one of the available sound effect modes Press to stop a music file TOYULNOO ALOWAY Press to play or pause a music file Mutes the sound from the unit Press again to restore the sound to the previous volume level Individual BASS MIDDLE TREBLE adjustment Use VOL adjustment keys Press to select a connected TV s video source Mutes the sound from the TV Press again to restore the sound to the previous volume level Exits TV functions the same as the EXIT button of the TV remote control Select Repeat File All Random Synchronizes the Air Track to a connected Optical source via the Optical jack so it turns on automatically when you turn on your TV This button allows you to choose to listen to audio from the Air Track or your TV Regulates and stabilizes the volume level against
35. ure with enough space around it for ventilation 8 4 inches 7 10 cm Make sure the ventilation slots are not covered Do not place the unit on amplifiers or other equipment which may become hot This unit is designed for continuous use To fully turn off the unit disconnect the AC plug from the wall outlet Unplug the unit if you intend to leave it unused for a long period of time During thunderstorms disconnect the AC plug from the wall outlet Do not expose the unit to direct sunlight or other heat sources Voltage peaks due to lightning could damage the unit This could lead to overheating and cause the unit to malfunction Protect the product from moisture i e vases and excess heat The batteries used with this product contain chemicals that are e g a fireplace or equipment creating strong magnetic or electric harmful to the environment fields Disconnect the power cable from the AC supply if the unit malfunctions Your product is not intended for industrial use It is for personal use only Condensation may occur if your product has been stored in cold temperatures If transporting the unit during the winter wait approximately 2 hours until the unit has reached room temperature Replace only with the same or equivalent type before using Do not dispose of batteries
Download Pdf Manuals
Related Search