Samsung C61R2AAST manual de utilizador
Contents
1. Safety continued E Safety during use This appliance is to be used only for normal cooking and frying in the home It is not de signed for commercial or industrial use Never use the hob for heating the room Take care when plugging electrical appliances into mains sockets near the hob Mains leads must not come into contact with the cooktop Overheated fat and oil can catch fire quickly Never leave surface units unattended when preparing foods in fat or oil for example when cooking chips Turn the cooking zones off after use Always keep the control panels clean and dry Never place combustible items on the hob It may cause fire Safety when cleaning Always turn the appliance off before cleaning For safety reasons do not clean the appliance with a steam jet or high pressure cleaner Clean the hob in accordance with the cleaning and care instructions contained in this manual Disposal Instructions Disposing of the packaging material All materials used to package the appliance are fully recyclable Sheet and hard foam parts are appropriately marked Please dispose of packaging materials and old appliances with due regard to safety and the environment Proper disposal of your old appliance not be a source of danger To do this have a qualified technician disconnect the appliance from the mains sup ply and remove the mains lead Warning Before disposing of your old appliance m2. ee Using This Manual E Please take the time to read this owner s manual paying particular attention to the safety information contained in the following section before using your appliance Keep this manual for future reference If transferring ownership of the appliance please remember to pass the manual on to the new owner The following symbols are used in the text Important indicates information on avoiding damage to the appliance This is the safety alert symbol Warning indicates information concerning your personal safety 1 This symbol indicates useful information and practical tips This symbol refers to measures that can be taken to help protect the environment 1 Numbers like these indicate step by step instructions for using the appliance 2 5 3 e This manual contains information on steps you can take yourself to diagnose and resolve problems that may arise Refer to the section Troubleshooting C Top MID C61RAAST_XFA 00131A 05_EN indd 2 e 1 11 2555 11 17 17 o Safety The safety aspects of this appliance comply with accepted technical standards and En the German Appliance Safety Law However as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions Electrical safety Be sure the appliance is properly installed and grounded by a qualified technician The appliance should be serviced only by
3. 209 Installation and Operating Instructions Ceramic Glass Hob emis 100 NDIY Recycled Paper This manual is made with 100 recycled paper C61RAAST C61RABAL C61RACN C61RADST C61RAEE C61R1AAMST C61R1ABMAL C61R1ACMN C61R1ADMST C61R1AEME C61R2AAST C61R2ABAL C61R2ACN C61R2ADST C61R2AEE To avoid the risk of accidents or damage to the hob read all instructions before installing or using the appliance Keep this manual for future reference C Top_MID C61RAAST_XFA 00131A 05_EN indd 1 e 1 11 2555 11 17 17 Top_MID C61RAAST_XFA 00131A 05_EN indd 2 1 11 2555 11 17 17 OA o Contents En Using This Manual sand a a ar ROBUR dete RS ec 2 ia ai 3 Electrical Sato iia we eb ae 3 A 3 Safety during USO vit ere en rt or ee rer ee 4 Safety When cleaning nerasi yae neun ae se Ga eae dara oped 4 Disposallinstructions ri ine aan mama an 4 Installing the Hob INE Re Rn Raab EEG Red 5 Regulations and compliance 5 Safety instructions for the installer liliis 5 Connecting to the mains power supply 6 Installing into the countetrtop inde denne a a eed a 7 Parts and Features cies a0 000 kn A A 9 Cooking zones and control panel 9 Components ide
4. symbol will go out and informa tion about residual heat will no longer be available However it may still be possible to burn yourself This can be avoided by always taking care when near the hob C Top MID C61RAAST_XFA 00131A 05_EN indd 12 12 e 1 11 2555 11 17 18 Before You Begin Initial cleaning Eg Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner AN Important Do not use caustic or abrasive cleaners The surface could be damaged Hob Use Using suitable cookware Better pans produce better results You can recognise good pans by their bases The base should be as thick and flat as pos sible When buying new pans pay particular attention to the diameter of the base Manufactur ers often give only the diameter of the upper rim Pots with aluminium or copper bases can cause metallic discolouration on the ceramic glass surface The discolouration is very difficult or impossible to remove Do not use pans made of cast iron or which have damaged bases with rough edges or burrs Permanent scratching can occur if these pan are slid across the surface When cold pan bases are normally bowed slightly inwards concave They should never be bowed outwards f you wish to use a special type of pan for example a pressure cooker simmering pan or a wok please observe the manufacturer s instructions Energy saving tips You can save valuab
5. The cooking zones switch themselves off at the following times Cooking setting Cooking setting Cooking setting Cooking setting 1 2 3 4 5 6 7 9 After 6 hours After 5 hours After 3 hours After 1 hour If the Hob is overheated because of abnormal operation ll B will be displayed And the Hob will be switched off elapsed see the section Troubleshooting 1 Should one or more of the cooking zones switch off before the indicated time has Other reasons why a cooking zone will switch itself off All cooking zones will immediately switch themselves off if liquid boils over and lands on the control panel The automatic shutoff will also be activated if you place a damp cloth on the control panel In both of these instances the appliance will need to be switched on again using the main power sensor after the liquid or the cloth has been removed 9 Residual heat indicator When an individual cooking zone or the hob is turned off the presence of residual heat is shown with an I for hot in the digital display of the appropriate cooking zones Even after the cooking zone has been switched off the residual heat indicator goes out only after the cooking zone has cooled You can use the residual heat for thawing or keeping food warm Important As long as the residual heat indicator is illuminated there is a risk of burns Important If the power supply is interrupted the f
6. qualified service personnel Repairs carried out by unqualified individuals may cause injury or serious malfunction If your appliance is in need of repair contact your local service centre Failure to follow these instructions may result in damage and void the warranty Flush mounted appliances may be operated only after they have been installed in cabinets and workplaces that conform to the relevant standards This ensures sufficient protection against contact for electrical units as required by the VDE Association of Ger man Electrical Engineers If your appliance malfunctions or if fractures cracks or splits appear switch off all cooking zones disconnect the hob from the mains supply and contact your local service centre If the cooktop cracks turn the appliance off to avoid the possibility of electric shock Do not use your hob until the glass surface has been replaced Do not use the hob to heat aluminium foil products wrapped in aluminium foil or frozen foods packaged in aluminium cookware Child safety This appliance is not intended for use by young children or infirm persons without the adequate supervision of a responsible adult Young children should be supervised to ensure that they do not play with the appliance The cooking zones will become hot when you cook Always keep small children away from the appliance C Top_MID C61RAAST_XFA 00131A 05_EN indd 3 e 1 11 2555 11 17 17
7. voltage of the appliance that is the voltage stated on the rating plate corresponds to the available supply voltage The rating plate is located on the lower casing of the hob e Shut off power to circuit before connecting wires to circuit The heating element voltage is AC230 V The appliance also works perfectly on older networks with AC220 V The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm eg automatic line protecting cut out earth leakage trips or fuse A type 555 F 180 C cable or one of a higher grade must be used as the mains connecting cable Rated current of appliance A Nominal cross sectional area mm 1N gt 25 and lt 32 gt 4 and lt 6 2N gt 10 and s 16 gt 1 5 and lt 2 5 The connection must be carried out as shown in the diagram The connecting links should fitted accord ing to the appropriate connection diagram The earth lead is connected to terminal The earth lead must be longer than leads carrying electric current The cable connections must be made in accordance with regulations and the terminal screws tightened securely The connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly locking into place Before switching on for the first time any protective fo
8. Weight Net 7 5 kg Gross 10 0 kg 24 Top_MID C61RAAST_XFA 00131A 05_EN indd 24 1 11 2555 11 17 18 NOTE Top_MID C61RAAST_XFA 00131A 05_EN indd 25 25 1 11 2555 11 17 18 QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT SOUTH AFRICA 0860 SAMSUNG 726 7864 NIGERIA 0800 SAMSUNG 726 7864 U A E 800 SAMSUNG 726 7864 OMAN 800 SAMSUNG 726 7864 KUWAIT 183 2255 BAHRAIN 8000 4726 www samsung com EGYPT 08000 726786 JORDAN 800 22273 MOROCCO 080 100 2255 SAUDI ARABIA 9200 21230 TURKEY 444 77 11 IRAN 021 8255 www samsung com www samservice com C Top_MID C61RAAST_XFA 00131A 05_EN indd 26 e Code No DG68 00131A 05 1 11 2555 11 17 18
9. ake it inoperable so that it can The appliance may not be disposed of in the household rubbish Information about collection dates and public refuse disposal sites is available from your local refuse department or council C Top MID C61RAAST_XFA 00131A 05_EN indd 4 e 1 11 2555 11 17 17 Installing the Hob personnel Please observe this instruction The warranty will not cover any damage that may occur as a result of improper installation Technical data is provided at the end of this manual j Important Be sure the new appliance is installed and grounded only by qualified Regulations and compliance This appliance meets the following standards EN 60 335 1 and EN 60 335 2 6 relating to the safety of electrical appliances for house hold use and similar purposes EN 60350 or DIN 44546 44547 44548 relating to the operating features of electric cook ers hobs ovens and grills for household use EN 55014 2 EN 55014 EN 61000 3 2 and EN 61000 3 3 relating to basic requirements for electromagnetic compatibility C This appliance complies with the following EU Directives 73 23 EWG dated 19 02 1973 Low Voltage Directive 89 336 EWG dated 03 05 1989 EMC Directive including Amending Directive 92 31 EWG and 93 68 EWG CE Labeling Directive Safety instructions for the installer A device must be provided
10. also make it easier to decide if a customer service visit is necessary Please take note of the following information What form does the problem take Under what circumstances does the problem occur When calling please know the model and serial number of your appliance This information is provided on the rating plate as follows Model description S N code 10 digits We recommend that you record the information here for easy reference Model Serial number When do you incur costs even during the warranty period if you could have remedied the problem yourself by applying one of the solutions provided in the section Troubleshooting if the customer service technician has to make several service calls because he was not provided with all of the relevant information before his visit and as a result for example has to make additional trips for parts Preparing for your phone call as described above will save you the cost of these trips 23 C Top MID C61RAAST_XFA 00131A 05_EN indd 23 e 1 11 2555 11 17 18 Technical Data EJ Appliance dimensions Width 575 mm Depth 505 mm Height 55 mm Worktop cut out dimensions Width 560 mm Depth 490 mm Corner radius 3 Cooking rings Position Diameter Power Front left 183 mm 1 800 W Rear left 148 mm 1 200 W Rear right 183 mm 1 800 W Front right 148 mm 1 200 W Connection voltage 230 V 50 Hz Maximum connected load power 6 0 kW
11. ance are to be performed only by a qualified service your appliance needs repair please contact your customer service centre What should I do if the cooking zones are not functioning Check for the following possibilities The fuse in the house wiring fuse box is intact If the fuses trip a number of times call an authorised electrician The appliance is properly switched on The control indicators in the control panel are illuminated The cooking zone is switched on The cooking zones are set at the desired heat settings What should I do if the cooking zones will not switch on Check for the following possibilities A period of more than 10 seconds has elapsed between when the On Off button was actu ated and the desired cooking zone switches on see the section Switching the appliance on The control panel is partially covered by a damp cloth or liquid What should I do ifthe display except for the residual warmth indicator sud denly disappears This could be a result of one of two possibilities The On Off sensor was accidentally actuated The control panel is partially covered by a damp cloth or liquid What should I do if after the cooking zones have been switched off residual warmth is not indicated in the display Check for the following possibility The cooking zone was only briefly used and therefore did not become hot enough If the cooking zone is hot please call the cust
12. e p dot ae eee dore Ea RUD E 10 The key features of your appliance 11 Safety Shutoff 2 ti dl Ar aont alee Ml ber ee 12 Residual heat indicator ri Us e DR mn ete 12 Before You Begln iii a en Ros Kelle 13 1110 FTO pv eR ESOS pd idee 13 Hob Use PETIT 13 Using suit bleico6kW re u bis anna dae aa bate a een 13 Using the touch control sensors IA UA ne 14 Switching the appliance an nennen tee 15 Temperature conttol re 15 Switching the appliance IA WAA kaaa kaaa 16 Switching a cookingi ZoNe Offi AA en ded Lod we dane 16 Using the child safety lock AA III 17 Locking and unlocking the control 19 Suggested settings for cooking specific foods 19 Gle ning and iss a aaa 20 HOD ze xe peste id dde a 20 Hob Frame vk erede aora ee eem ec RUP ee hoe Re are a RC e 21 To avoid damaging your appliance 21 Warranty and Service x rx 22 FAQs nd troubleshooting arm Rte aan na o ea Fe lace SU du Ro 22 SSIS icd Sereni aed re t rd ere 23 Technical Data waa aa aad a Rh dark raa 24 1 C Top MID C61RAAST_XFA 00131A 05_EN indd 1 e 1 11 2555 11 17 17
13. emperature shock but it is not unbreakable It can be damaged by a particularly sharp or hard object dropping onto the cooktop Do not use pans made of cast iron or which have damaged bases with rough edges or burrs Scratching may occur if these pans are slid across the surface Do not place pans on the hob frame Scratching and damage to the finish may occur Avoid spilling acidic liquids for example vinegar lemon juice and descaling agents onto the hob frame since such liquids can cause dull spots If sugar or a preparation containing sugar comes into contact with a hot cooking zone and melts it should be cleaned off immediately with a kitchen scraper while it is still hot If al lowed to cool it may damage the surface when removed Keep all items and materials that could melt for example plastics aluminium foil and oven foils away from the ceramic glass surface If something of this nature melts onto the cooktop it must be removed immediately with a scraper 21 C Top MID C61RAAST_XFA 00131A 05_EN indd 21 e 1 11 2555 11 17 18 Warranty and Service FAQs and troubleshooting A fault may result from a minor error that you can correct yourself with the help of the following instructions Do not attempt any further repairs if the following instructions do not help in each specific case technician Improperly effected repairs may result in considerable risk to the user If N Warning Repairs to the appli
14. en actuated to switch on your appliance a heat setting must be selected within approximately 10 seconds Otherwise the appliance will switch itself off for safety reasons Temperature control For setting and adjusting the power level to B for cooking touch the corresponding cook e ing zone s C keys The first time is pressed the heat level is set to Bj The first time DD is pressed the heat level is set to f Use the key to increase the heat setting and the key to decrease 15 C Top MID C61RAAST_XFA 00131A 05_EN indd 15 e 1 11 2555 11 17 18 ME Hob Use Continued Switching the appliance off To completely switch off the appliance use the On Off control sensor Touch the On Off 5 sensor After switching off a single cooking zone or the entire cooking surface the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an I for hot touched one additional time and the heat setting will go to zero For faster adjustment keep your finger on the E sensor until the required value is obtained If more than one sensor is pressed for longer than 10 seconds 8 will show in the heat setting display To reset touch the On Off sensor 1 If the heat setting is at and you want to turn the gt bu
15. es use a glass scraper 2 Place the glass scraper at an angle to the ceramic glass surface 3 Remove soiling by scraping with the blade 1 Glass scrapers and ceramic glass cleaners are available from specialty retailers Er 20 Top_MID C61RAAST_XFA 00131A 05_EN indd 20 e 1 11 2555 11 17 18 ee Cleaning and Care Continued Problem Dirt Eg 1 Remove burnt on sugar melted plastic aluminium foil or other materials with a glass scraper immediately and while still hot Important There is a risk of burning yourself when the glass scraper is used on a hot cooking zone 2 Clean the hob as normal when it has cooled down melted has been allowed to cool warm it up again for cleaning Scratches or dark blemishes on the ceramic glass P EI surface caused for example by a pan with sharp edges cannot be removed However they do not impair the function of the hob 1 the cooking zone on which something has Hob Frame Important Do not use vinegar lemon juice or scale remover on the hob frame otherwise dull blemishes will appear 1 Wipe the frame with a damp cloth 2 Moisten dried debris with a wet cloth Wipe and rub dry To avoid damaging your appliance Do not use the cooktop as a work surface or for storage not operate a cooking zone if there is no pan on the cooktop or if the pan is empty Ceramic glass is very tough and resistant to t
16. il or stickers must be removed from the ceramic glass surface When the hob is powered on for the first time all displays light and the child safety lock is activated Once the hob is connected to the mains supply check that all cooking zones are ready for use by briefly switching each on in turn at the maximum setting ei ud 9 L1 N 0 4 ERSTE lt IN gt L Brown N Blue PE Green nection and appliance connection schemes otherwise components can be dam Warning Pay attention conformity to phase and neutral allocation of house aged Warranty does not cover damage resulting from improper installation Top_MID C61RAAST_XFA 00131A 05_EN indd 6 1 11 2555 11 17 17 Installing the Hob Continued Installing into the countertop En Make a note of the serial number on the appliance rating plate prior to installation This number will be required in the case of requests for service and is no longer ac cessible after installation as it is on the original rating plate on the underside of the appliance Pay special attention to the minimum space and clearance requirements Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets Min 50mm C Top_MID C61RAAST_XFA 00131A 05_EN indd 7 e 1 11 2555 11 17 17 Bi Installing the Hob Con
17. in the electrical installation that allows the appliance to be discon nected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut outs fuses screw type fuses are to be removed from the holder earth leakage trips and contactors With respect to fire protection this appliance corresponds to EN 60 335 2 6 This type of appliance may be installed with a high cupboard or wall on one side Drawers may not be fitted underneath the hob The installation must guarantee shock protection The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930 For protection against moisture all cut surfaces are to be sealed with a suitable sealant On tiled work surfaces the joints in the area where the hob sits must be completely filled with grout On natural artificial stone or ceramic tops the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive Ensure that the seal is correctly seated against the work surface without any gaps Additional silicon sealant must not be applied this would make removal more difficult when servicing The hob must be pressed out from below when removed C Top MID C61RAAST_XFA 00131A 05_EN indd 5 e 1 11 2555 11 17 17 Installing the Hob Continued EJ Connecting to the mains power supply Before connecting check that the nominal
18. in the table above are provided only as guidelines for your refer ence You will need to adjust the heat settings according to specific cookware and foods C Top_MID C61RAAST_XFA 00131A 05_EN indd 19 19 e 1 1 2555 11 17 18 ee Cleaning and Care EJ Hob Important Cleaning agents must not come into contact with a heated ceramic glass AN surface All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot Do not use any aggressive cleaners such as grill or oven sprays scouring pads or abrasive pan cleaners This will prevent spillage from becoming burnt onto the surface Remove scales watermarks fat drippings and metallic discolouration with the use of a commercially available ceramic glass or stainless steel cleaner 1 Clean the ceramic glass surface after each use when it is still warm to the touch Light Soiling 1 Wipe the ceramic glass surface with a damp cloth 2 Rub dry with a clean cloth Remnants of cleaning agent must not be left on the surface 3 Thoroughly clean the entire ceramic glass cooking surface once a week with a commer cially available ceramic glass or stainless steel cleaner A Wipe the ceramic glass surface using adequate amounts of clean water and rub dry with a clean lint free cloth e Stubborn Soiling 1 To remove food that has boiled over and stubborn splash
19. le energy observing the following points Right Wrong 13 Top_MID C61RAAST_XFA 00131A 05_EN indd 13 e 1 11 2555 11 17 18 Hob Use Continued EJ Always position pots and pans before switching on the cooking zone Dirty cooking zones and pan bases increase power consumption When possible position the lids firmly on the pots and pans to cover completely Switch the cooking zones off before the end of the cooking time to use the residual heat for keeping foods warm or for thawing The base of the pan should be the same size as the cooking zone Using a pressure cooker reduces cooking times by up to 50 96 Using the touch control sensors To operate the touch control sensors touch the desired panel with the tip of your pointed fin ger until the relevant displays illuminate or go out or until the desired function is activated Ensure that you are touching only one sensor panel when operating the appliance If your finger is too flat on the panel an adjacent sensor may be actuated as well 14 C Top MID C61RAAST_XFA 00131A 05_EN indd 14 e 1 11 2555 11 17 18 Hob Use Continued Switching the appliance on En Touch the Lock A sensor for approximately 3 seconds The appliance is switched on using the On Off control sensor Touch the On Off sensor The digital displays will show 8 After the On Off b sensor has be
20. ocess the control panel with the exception of the On Off control sensor can be locked in order to prevent the settings from being changed uninten tionally for example by wiping over the panel with a cloth 1 Touch the lock control sensor for approximately 3 seconds The indicator light in the lock control sensor will illuminate The control sensors are now locked 2 To unlock the control sensor touch the lock control sensor again for approximately 3 sec onds The indicator light in the lock control sensor will extinguish Suggested settings for cooking specific foods The figures in the table below are guidelines The heat settings required for various cooking methods depend on a number of variables including the quality ofthe cookware being used and the type and amount of food being cooked Switch Setting Cookingmethod Examples for Use Warming Warming large amounts of liquid boiling noodles 9 Sauteing searing meat browning goulash braising meat Frying 8 Intensive Steak sirloin hash browns sausages pancakes 7 Frying griddle cakes 6 Frying Schnitzel chops liver fish rissoles fried eggs 5 Cooking up to 1 5 liquid potatoes vegetables Boiling 4 3 Steaming Steaming and stewing of small amounts of vegeta Stewing bles boiling rice and milk dishes 2 Boiling 1 Melting Melting butter dissolving gelatine melting chocolate Note The heat settings indicated
21. omer service centre What should I do if the cooking zone will not switch on or off This could be due to one of the following possibilities The control panel is partially covered by a damp cloth or liquid The child safety lock is on What should I do if the B S display is illuminated Check for the following The control panel is partially covered by a damp cloth or liquid To reset press the On Off control sensor 22 C Top MID C61RAAST_XFA 00131A 05_EN indd 22 e 1 11 2555 11 17 18 o ME Warranty and Service Continued What does it mean when the burner does not glow red Eg The selected temperature of the cooking zone is maintained by a sensor that cycles the zone on and off so the surface cooking area will not always glow red If you select a low heat setting the heat will cycle on and off more frequently than at higher settings The heat also cycles on and off at the highest setting If you request a service call because of an error made in operating the appliance the visit from the customer service technician may incur a charge even during the warranty period Service Before calling for assistance or service please check the section Troubleshooting If you still need help follow the instructions below Is it a technical fault If so please contact your customer service centre Always prepare in advance for the discussion This will ease the process of diagnosing the problem and
22. rner the sensor can be Switching a cooking zone off To switch off a cooking zone return the setting to B by using the control panel s heat setting and touch sensors or L 16 C Top_MID C61RAAST_XFA 00131A 05_EN indd 16 e 1 11 2555 11 17 18 NS ee Hob Use Continued Using the child safety lock En You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface The lock control sensor can be used only when the power is on Switching the child safety lock on 1 Touch the amp control sensor for approximately seconds An acoustic signal will sound as confirmation 2 Touch any heat setting control sensor B will appear in the displays indicating the child safety lock has been activated 17 C Top MID C61RAAST_XFA 00131A 05_EN indd 17 e 1 11 2555 11 17 18 Hob Use Continued E Switching the child safety lock off 1 Touch the control sensor for approximately 3 seconds An acoustic signal will sound as confirmation 1 After switching off the appliance child safety lock will be activated automatically within some minutes for safety reasons 18 Top_MID C61RAAST_XFA 00131A 05_EN indd 18 e 1 11 2555 11 17 18 Hob Use Continued Locking and unlocking the control panel At any stage during the cooking pr
23. separate mains Switch Touching this sensor switches the power supply on or off completely Control and function indicators Digital displays and indicator lights provide information about settings and activated functions as well as the presence of residual heat in the various cooking zones Safety shutoff A safety shutoff ensures that all cooking zones switch off automatically after a period of time if the setting has not been changed Residual heat indicator An icon for residual heat appears in the display if the cooking zone is so hot that there is a risk of burning Digital displays The four display fields are assigned to the four cooking zones They show the following information the appliance has been switched on selected heat settings residual heat B the child lock is activated and B error message the sensor has been touched for longer than 10 seconds error message when the Hob is overheated because of abnormal operation 11 C Top MID C61RAAST_XFA 00131A 05_EN indd 11 e 1 11 2555 11 17 18 Parts and Features Continued Safety shutoff If one ofthe cooking zones is not switched off or the heat setting is not adjusted after an ex tended period of time that particular cooking zone will automatically switch itself off Any residual warmth will be indicated with ff for hot in the digital displays corresponding to the particular cooking zones
24. tinued Top_MID C61RAAST_XFA 00131A 05_EN indd 8 1 11 2555 11 17 17 MATI Parts and Features Cooking zones and control panel Eg Single cooking zone 1200 W Single cooking zone 1800W Single cooking zone Control panel 1200 W So Single cooking zone 1800W Indicators for heat settings and residual heat Lock control sensor Heat setting selectors On Off control sensor C Top MID C61RAAST_XFA 00131A 05_EN indd 9 e 1 11 2555 11 17 17 Parts and Features Continued EJ Components 1 Ceramic Glass Hob 2 Installation Brackets LR 3 Screws 10 Top_MID C61RAAST_XFA 00131A 05_EN indd 10 e 1 11 2555 11 17 17 ee Parts and Features Continued The key features of your appliance Eg Ceramic glass cooking surface The appliance has a ceramic glass cooking surface and four rapid response cooking zones The hob s powerful radiant heater elements significantly shorten the amount of time required for the zones to heat up Touch control sensors Your appliance is operated using touch control sensors Easy cleaning The advantage of the ceramic glass cooking surface and the control sensors is their accessibility for cleaning The smooth flat surface is easy to clean On Off sensor The On Off control sensor provides the appliance with a
Download Pdf Manuals
Related Search